HSQY Vaquform PETG sheet - 0.5MM (35 PK) yu gi oh.

0.5mm Klia PETG Shit fɔ Dɛsktɔp Vaykum Fɔm

HSQY 0.5mm klia PETG shit na transparent glycol-modified copolyester sheet we dɛn divɛlɔp fɔ dɛsktɔp vaykum fɔm, tɛmfɔmin, protɔtayp, transparent pak, mold ɛn laytwɛt fɔm kɔmpɔnɛnt dɛn.

Na wan nominal tiknes we na 0.5mm, ɔ 500 maykron, PETG de gi yusful balans fɔ transparency, tafnɛs ɛn fleksibiliti fɔ shalɔ to mɔdaret-dip vaykum-fɔm pat dɛn. Kastom shit dimɛnshɔn dɛn kin tɔk bɔt akɔdin to di klem freym ɛn yuzable fɔm eria na di kɔstɔma in vaykum-fɔm mashin.

HSQY de saplae PETG bak insay big big sheet ɛn rol dɛn. Di prɔdak infɔmeshɔn we de naw de list di rol wit frɔm lɛk 110mm to 1280mm, shit fɔmat dɛn we inklud 915 × 1220mm ɛn 1000 × 2000mm, ɛn ɔda PETG tiknes frɔm lɛk 0.15mm to 7mm.

Fɔ di dɛsktɔp vaykum-fɔm ikwipmɛnt, ɔltɛm kɔnfɔm di kɔt-shit lɔng ɛn waid we yu nid bifo yu ɔda. Mashin kompitibiliti dipen pan di aktual klem-frɛm dimɛnshɔn ɛn yuzable fɔm eria pas PETG tiknes nɔmɔ.

0.5mm PETG Vaykum Fɔm Sheet Imej dɛn

Wetin Na PETG Shit fɔ Vaykum Fɔm?

PETG na glycol-modified kopolyester we gɛt fɔ du wit PET. di glycol modifyushכn de ridyus kristalizashכn di tεm we dεn de nכmal prכsεsin εn i de εp di suitable PETG gred dεm mεnten transparency we dεn de hεt εn fכm insay tri-dimεnshכnal shep dεm.

We dɛn de mek vaykum, dɛn kin klem di PETG shit, wam am te i saf inof ɛn afta dat dɛn kin drɔ am agens wan mold we dɛn de yuz nɛgitiv prɛshɔn. Afta we i dɔn kol, di kɔmpɔnɛnt we dɔn fɔm kin kɔmɔt ɛn trim am to di shep we dɛn nid.

PETG na tin we bɔku pipul dɛn kin tink bɔt fɔ vaykum-fɔm aplikeshɔn bikɔs di rayt gred dɛn kin jɔyn klia, taf ɛn di abiliti fɔ riprodyuz di ditel dɛn we di mold gɛt we nɔ gɛt di britl fraktrɔs bihayvya we gɛt fɔ du wit sɔm transparent rigid plastic dɛn.

0.5mm Klia PETG Shit Spɛsifikeshɔn dɛn

PETG Teknik Data Shit

Di PETG data sheet we de kam biɛn ya, dɛn kin kip am frɔm di ɔrijinal prodak pej. Kɔnfɛm se di dɔkyumɛnt de aplay to di ɛksaktɔ PETG rɛsin gred, tik ɛn prodakshɔn spɛsifikɛshɔn bifo yu yuz di valyu dɛn fɔ injinɛri ɔ rigyuletɔri disizhɔn dɛn.

Wetin Mek Dɛn De Yuz 0.5mm PETG fɔ Dɛsktɔp Vaykum Fɔm

Laytweyt Startin Gej

0.5mm statin shit na tin inof fכ plεnti sכm sכm vaykum-fכm mashin dεm fכ hεt efyushכn we i stil de gi yusful bכdi fכ laytwεt fכm kכmכpכnt dεm.

Klia Prodakt Visibiliti

Klia PETG yusful fɔ transparent mold, protɔtayp kɔva, pak ɛn displei usay visibiliti tru di fɔm pat impɔtant.

Ditayl Mold Riprodakshɔn

Suitabl PETG gred kin riprodyuz rili ditayla mold jɔyometri we dɛn de kɔntrol di sheet ɔt, vaykum lɛvɛl, mold ventileshɔn ɛn fɔm kɔndishɔn kɔrɛkt wan.

Yuzful Tafnɛs fɔ Protɔtayp

PETG de gi yusful resistans to krak di tɛm we dɛn de du bɔku fɔm, trim ɛn fabrikeshɔn ɔpreshɔn, we de mek i prɛktikal fɔ protɔtayp ɛn shɔt-rɔn vaykum-fɔm aplikeshɔn.

Aw fɔ Vaykum Fɔm 0.5mm PETG Sheet

1. Kɔt di PETG to di Mashin Frɛm Sayz

Mekɔp di mashin in sheet lɔng ɛn waid we i nid. Di klem freym fɔ ol di sheet fayn fayn wan rawnd di ful perimita bifo i ɔt am.

2. Chɛk di Protɛktiv Mask

Rimov di protɛktiv film frɔm sɔfays dɛn we go de pan fɔm ɔt pas di masking spɔlayt spɛshal kɔnfyus se di protɛktiv film fit fɔ thermoforming.

3. Klem di Shit Ivin wan

If yu nɔ klem di shit ivin, dat kin mek i slip ɔ chenj as i de sof. Chek se di PETG de sɛntrɛd ɛn kip am rawnd di kɔmplit freym.

4. Hɛt di PETG Yunifɔm wan

Yunifɔm ɔt rili impɔtant. Di kɔrɛkt hita sɛtin ɛn di tɛm fɔ ɔt dipen pan PETG gred, tiknes, di kayn hita, distans frɔm di hita ɛn di kɔndishɔn dɛn we de rawnd.

5. Put di Vaykum

We di PETG rich di kɔrɛkt fɔm kɔndishɔn, put vaykum so dat di sheet we dɔn sof go fala di mold sɔfays. Adekwat mold venting impɔtant fɔ riprodyuz smɔl ditil dɛm.

6. Kul Bifo Yu Rilis

Alaw di PETG we dɔn fɔm fɔ kol inof bifo yu pul am na di mold. If yu rilis di pat tumɔs kwik, dat kin mek yu nɔ chenj.

7. Trim ɛn Inspɛkt

Trim ɛksɛs matirial ɛn inspɛkt di wɔl tik, klia, kɔna, sɔfays apinans ɛn dimɛnshɔnal stebiliti bifo yu apruv di fɔm sɛtup.

PETG Vakuum Fɔm Tɛmpratura

Di kɔrɛkt PETG fɔm tɛmpracha dipen pan di ɛksaktɔl rɛsin gred, shit tiknɛs, hita dizayn, fɔm dip ɛn mashin saykl.

Nɔ kɔpi wan yunivasal fɔm tɛmpracha frɔm ɔda PETG brand. Difrɛn PETG fɔmyulashɔn ɛn mashin hita kin nid difrɛn prɔses sɛtin.

Fɔ wan nyu prɔjek, stat frɔm di prɔsesin gayd we dɛn gi fɔ di ɛksaktɔ PETG gred ɛn ɔptimayz di ɔt tɛm tru fɔm trayal. Rikɔd di sɛtin dɛn we de prodyuz yunifom sag, gud ditel riprodakshɔn ɛn akseptabl finish-wɔl tik.

PETG Nid fɔ Pri-Dray Bifo Vaykum Fɔm?

Bɔku tɛmfɔmin PETG gred dɛn kin fɔm we nɔ gɛt sɛpret prɛdray stɛp we dɛn dɔn mek di matirial fayn fayn wan, pak am ɛn kip am.

Bɔt, 'PETG nɔ ɛva nid fɔ drɛy' nɔ fɔ trit am lɛk yunivasal lɔ. Fɔ fala di tɛknikal gayd fɔ di ɛksaktɔ PETG rɛsin ɛn chɛk di matirial kɔndishɔn, pak intɛgriti ɛn stɔrɔj ​​istri bifo yu fɔm.

Aw Fɔm Dip Afɛkt 0.5mm PETG

We dɛn drɔ wan flat PETG sheet oba wan mold, di tin kin strɛch ɛn i kin tan lɛk tin. Di dip we di drɔ, na di mɔ di pɔtnɛshɛl ridɔkshɔn pan di lokal wɔl tik.

So 0.5mm statin shit kin fayn fɔ shalo ɛn mɔdaret-dip pat bɔt i nɔ kin gi inof finish-wɔl tik fɔ wan dip kɔmpɔnɛnt we nid signifyant rigiditi ɔ lod rɛsistɛns.

Gi di mold lɔng, wit, ayt, kɔna rayus ɛn draft angle we yu de aks fɔ matirial rɛkɛmɔndeshɔn.

Wetin Afɛkt PETG Vaykum Fɔm Kwaliti?

PETG Sheet fɔ Dɛsktɔp Vaykum Fɔm Mashin dɛn

Difrɛn dɛsktɔp vaykum-fɔm mashin dɛn de yuz difrɛn klem-frɛm dimɛnshɔn dɛn. Di wan dɛn we de bay fɔ gi di rayt mashin mɔdel ɔ di plastic-shit lɔng ɛn waid we dɛn nid bifo dɛn ɔda kɔstɔm-kat PETG.

HSQY kin tɔk bɔt kɔstɔm kɔt frɔm big PETG shit ɔ rol stok so dat di shit dimɛnshɔn go mach di kɔstɔma in mashin. Tiknɛs tolɛreshɔn, lɔng tolɛreshɔn, wit tolɛreshɔn ɛn pak kwantiti fɔ kɔnfɔm insay di kot.

If yu nid fɔ kɔmpitabl wit wan mashin brand we gɛt nem, sɛn di ɛksaktɔl mashin mɔdel ɛn di freym dimɛnshɔn. Kompatibiliti fɔ verify frɔm dimɛnshɔn ɛn fɔm trayal pas fɔ asum frɔm di prodak nem nɔmɔ.

PETG vs HIPS vs ABS fɔ Vaykum Fɔm

Aplikeshɔn dɛn fɔ 0.5mm PETG Vaykum Fɔm Shit

Prototayp dɛn fɔ Prodakt

Dɛsktɔp vaykum fɔm de alaw disayna ɛn manifakta dɛn fɔ mek transparent protɔtayp shel ɛn kɔva dɛn we dɛn nɔ invɛst wantɛm wantɛm pan ay-volyum fɔm tul.

Kastom Blister Packaging we dɛn kin yuz fɔ mek tin dɛn

Klia PETG kin fɔm insay transparent pak kaviti fɔ prodak sɛmpul, rital displei ɛn protɔtayp blista pak usay prodak visibiliti impɔtant.

Chokolat ɛn Fɔd Mɔld dɛn

Fɔd-kɔntakt mol dɛn nid fɔ gɛt PETG gred wit aplikebul fud-kɔntakt dɔkyumentri. Nɔ tink se ɛvri industrial PETG sheet fayn fɔ gɛt dairekt it kɔntakt.

Model Making ɛn Props

PETG kin yuz fɔ mɔdel kɔmpɔnɛnt dɛn, transparent shel dɛn, prɔp pat dɛn ɛn ɔda lɔw-volyum fɔm prodak dɛn we dɛn mek wit kɔmpakt vaykum-fɔm ikwipmɛnt.

Transparent Kɔva ɛn Gad dɛn

Laytwɛt kɔva, shild ɛn displei kɔmpɔnɛnt dɛn kin fɔm vaykum usay 0.5mm finish matirial de gi inof trɛnk fɔ di aplikeshɔn.

Yu tink se yu kin yuz 0.5mm PETG fɔ Dip Draw Vaykum Fɔm?

PETG kin fɔm rili ditayla shep dɛn, bɔt fɔ stat tik ɛn drɔ jɔyometri fɔ tink bɔt togɛda. Wan dip drɔ de sheb di ɔrijinal 0.5mm sheet ova wan bɔku big sɔfa eria, we de ridyus di tik we di wɔl tik.

If di mold dip ɔ i gɛt shap transishɔn, dɛn kin nid fɔ yuz tik stat sheet, big kɔna rayus, plɔg ɛp ɔ difrɛn fɔm strateji.

Send di mold drɔin ɛn di rigiditi we dɛn nid fɔ dɔn-wɔl to HSQY bifo yu pik di PETG gej.

Kɔt PETG Sheet to Kastɔm ​​Vaykum Fɔma Sayz dɛn

Bɔku tɛm, di wan dɛn we de yuz di dɛsktɔp vaykum-fɔm kin nid smɔl smɔl kɔt sheet dɛn pas masta shit ɔ industrial rol dɛn. Kכstכm-kכt PETG kin ridyus di prεparashכn tεm εn impruv kכnsistεns bitwin fכm saykl dεm.

Di wan dɛn we de bay fɔ gi di rayt lɔng, waid, tik ɛn tolɛreshɔn we dɛn dɔn dɔn. Nɔ spɛsifa di vaykum-fɔma mɔdel nɔmɔ pas dɛn dɔn kɔnfyus di shit dimɛnshɔn dɛn we dɛn nid bak.

Fɔ volyum ɔda, dɛn kin tɔk bak bɔt di kɔstɔm pak kwantiti, lɛbl ɛn katon dɛn.

Optik Kwaliti ɛn Protɛktiv Mask

Vεykum-fכm transparent prodakt dεm kin nid fכ kכntrol optik apinεns bכku tεm. Di wan dɛn we de bay kin spɛsifa transparency, haze, tint, gloss ɛn akseptabl surface-defect limits usay di apinɛns impɔtant.

Protektiv mask kin ɛp fɔ ridyus skrat we yu de handle, kɔt ɛn transpɔt. If yu nid fɔ mask, sho if dɛn fɔ protɛkt wan ɔ ɔl tu di say dɛn ɛn if dɛn fɔ pul di fim bifo dɛn mek di fim we dɛn kɔl thermoforming.

Yu tink se Standard PETG UV Resistant?

Standard klia PETG nɔ fɔ ɔtomɛtik diskrayb as fit fɔ lɔng tɛm ɔdasay ɛksplɔshɔn. Kɔntinyu fɔ layt ɛn di wɛda kin afɛkt di optik ɛn mɛkanikal pefɔmɛns dipen pan di gred.

Di projɛkt dɛn we de na do fɔ sho di savis layf we dɛn de op fɔ, di say we dɛn de ɛn di say we dɛn go de na di UV so dat dɛn go ebul fɔ evalyu wan gred we dɛn dɔn stebul wit UV ɔ we dɛn protɛkt wit UV usay dɛn nid am.

Food-Contact PETG fɔ Vaykum-Fɔm Mold dɛn

Dɛn kin gi sɔm PETG rɛsin gred dɛn we dɛn dɔn pik fɔ yuz fɔ it-kɔntakt, bɔt dis na gred-spɛsifi k. Fɔd-kɔntakt suitability fɔ kɔnfyus fɔ di ɛksaktɔ rɛsin, aditiv, shit spɛsifikɛshɔn, dɛstineshɔn makɛt, fud tayp ɛn kɔntakt kɔndishɔn.

If dɛn go yuz di prɔdak we dɛn mek wit vaykum fɔ chɔklɛt mold, it trey ɔ ɔda tin dɛn we pɔsin kin kɔntakt wit it dairekt wan, aks fɔ di rayt dɔkyumɛnt bifo dɛn mek am.

Kastom PETG Sheet Opshɔn dɛn

• 0.5mm / 500μm ficha tiknes.

• Ɔda tiknes dɛn we de ɔnda prodakshɔn kɔnfɔmeshɔn.

• Kastom sheet lɔng ɛn wit fɔ dɛsktɔp vaykum-fɔm mashin dɛn.

• Standart big PETG sheet dɛn.

• Kastom slit rol wit dɛn.

• Kla ɛn kɔstɔmayt kɔlɔ dɛn.

• Wan-sayd ɔ tu-sayd protɛktiv masking.

• Kastom optik rikwaymɛnt dɛn.

• Fɔd-kɔntakt gred wit aplikebul dɔkyumentri usay i de.

• UV-resistant gred dɛn we de ɔnda tɛknikal kɔnfɔmeshɔn.

• Customized sheet kwantiti fɔ wan pak.

• Kastom katon, lɛbl ɛn palet mak dɛn.

Eksplɔrɔ di ful wan            HSQY PETG shit rεnj        fכ adishכnal tiknes, saiz εn thermoforming aplikεshכn.

Infɔmeshɔn we dɛn nid fɔ mek wan PETG Vaykum Fɔm Kɔt

• PETG tik we dɛn nid.

• Finished sheet lɔng ɛn wit.

• Vakum-fɔm mashin brand ɛn mɔdel.

• Dimɛnshɔn dɛn fɔ klem-frɛm.

• Mold lɔng, wit ɛn ayt.

• Maksimal fɔm dip.

• Kɔna rayus ɛn draft angle if dɛn no.

• Transparency ɔ haze spesifikeshɔn we dɛn nid.

• Protektiv masking rikwaymɛnt.

• Fɔd-kɔntakt rikwaymɛnt if i pɔsibul.

• UV rikwaymɛnt if i apɔynt.

• Kwantiti fɔ wan pak.

• Tɔtɔl ɔda kwantiti ɛn ɛni ia kɔnsɔmshɔn.

• Di tin dɛn we dɛn nid fɔ pak ɛn palet.

• Di kɔntri we dɛn de go ɛn di pɔt.

Sɛtifiket ɛn Tɛknikal Dokumɛnt

Di sɛtifiket pikchɔ we de dɔŋ ya, dɛn kin kip am frɔm di ɔrijinal prɔdak pej. Di wan dɛn we de bay fɔ kɔnfɔm di kɔrɛnt dɔkyumɛnt vɛshɔn, validiti, di ɔganayzeshɔn we de gi ɛn di skɔp bifo dɛn abop pan am fɔ wan patikyula ɔda.

Wan jenɛral kwaliti-mɛnejmɛnt sɛtifiket nɔ de pruv ɔtomɛtik wan fɔ pruv it-kɔntakt, mɛdikal, UV, flame-retardant ɔ ɔda aplikeshɔn-spɛsifi k pefɔmɛns. Rikwest dɔkyumentri fɔ di ɛksaktɔ PETG gred we dɛn tin ya we dɛn nid de aplay.

HSQY Plastik Grup Ɛgzibishin

Di ɔrijinal ɛgzibishin kolaj de dɔŋ ya. HSQY de tek pat pan intanashɔnal ɛgzibishin fɔ tɔk bɔt PETG shit, thermoforming matirial ɛn kɔstɔmayz plastic-shit projɛkt wit distribyushɔn, kɔnvɔta ɛn manifakta dɛn.

PETG Sheet Pak ɛn Delivri

Sampul Pak: Dɛn kin pak smɔl smɔl PETG sheet dɛn insay PE bag ɛn katɔn akɔdin to di dimɛnshɔn.

Sheet Packing: Di kɔrɛnt prodak sɔs de rɛfrɛns 35 sheet fɔ wan pak. Faynal kwantiti fɔ kɔnfyus afta dɛn dɔn disayd di dimɛnshɔn fɔ di shit we dɔn dɔn ɛn di pak we de protɛkt am.

Pallet Packing: Kɔrɛnt prodak infɔmeshɔn rɛfrɛns lɛk 500-2000kg fɔ wan plai wud palet, sɔbjɛkt to sheet dimɛnshɔn ɛn shiping rikwaymɛnt.

Container Loading: Di sos we de naw de rifer to lɛk 20 tan. Aktual ligal peylɔd ɛn shit kwantiti dipen pan pak dizayn, palet wet ɛn dɛstineshɔn ristrikshɔn.

Dilivri Tɛm: FOB, CIF ɛn EXW de na di list naw.

Rifrɛns Lid Taym: Na lɛk 7-15 dez afta dipɔsit ɛn fayn spɛsifikɛshɔn kɔnfɔmeshɔn, dipen pan kwantiti ɛn prodakshɔn schedule.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 0.5mm PETG Vacuum Forming Sheet

0.5mm PETG fit fo vaykum fom?

Yɛs. Suitabl PETG gred kin bi vaykum fɔm insay laytwɛt transparent pak, kɔva, mold, protɔtayp pat ɛn ɔda fɔm kɔmpɔnɛnt dɛn. Faynal suitability dipen pan fɔm dip ɛn finish-wɔl rikwaymɛnt.

Aw tik 0.5mm PETG na maykron?

0.5mm ikwal to 500 maykron.

Yu tink se dɛn kin kɔt PETG sheet fɔ dɛsktɔp vaykum fɔm mashin dɛn?

Yɛs. Gi di ɛksaktɔl klem-frɛm shit dimɛnshɔn, tik, tolɛreshɔn ɛn kwantiti we dɛn nid fɔ ɛni pak so dat dɛn go ebul fɔ evaluate kɔstɔm kɔt.

Dis PETG kompitibul wit Vaquform mashin dem?

Kompatibiliti fɔ kɔnfyus yuz di ɛksaktɔ Vaquform mashin mɔdel, rikwayd shit dimɛnshɔn ɛn fɔm trayal. Nɔ asum kɔmpitibliti frɔm di PETG tiknes nɔmɔ. Kɔntakt HSQY wit di mashin mɔdel so dat dɛn go kɔnfɔm di rayt saiz we dɛn kɔt.

Yu tink se PETG nid fɔ drɛy bifo tɛm?

Bɔku PETG tɛmfɔmin gred dɛn kin prosɛs witout sɛpret prɛdray we dɛn kip dɛn fayn, bɔt dis nɔto ɔlman. Fɔ fala di prɔsesin instrɔkshɔn fɔ di ɛksaktɔl PETG gred we dɛn gi.

Us tɛmpracha a fɔ vaykum fɔm PETG?

Fɔm tɛmpracha dipen pan PETG gred, tik, hita tayp, mold jɔyometri ɛn mashin saykl. Yuz gred-spɛsifi k prɔsesin gayd ɛn fɔm trayal instead fɔ abop pan wan yunivasal tɛmpracha.

Yu tink se yu kin yuz 0.5mm PETG fɔ dip drɔ?

Dɛn kin yuz am fɔ bɔku shep dɛn we dɔn fɔm, bɔt dip drɔ dɛn kin mek di wɔl tan bad bad wan. Wan tik statin shit ɔ difrɛn fɔm strateji kin nid fɔ dip pat dɛn we nid ay finish-wɔl trɛnk.

Wetin kin mek wɛb de du di tɛm we PETG vaykum de fɔm?

Webbing kin inflɔws bay we i de ɔt pasmak, di mold ficha dɛn we de nia di ples, di mold jɔyometri we nɔ fayn, we nɔ gɛt inɔf matirial kɔntrol ɔ we nɔ fayn fɔ fɔm. Mold spacing ɛn hitin profayl dɛn fɔ optimiz di tɛm we dɛn de tray.

Yu tink se dɛn kin yuz PETG fɔ mek it mold?

Yu kin yuz wan spɛshal kwalifay fɔ it-kɔntakt PETG gred usay di aplikebul rɛsin ɛn dɔkyumentri mit di dɛstineshɔn-maket rikwaymɛnt dɛn. Nɔ tink se ɛvri PETG gred fayn fɔ gɛt dairekt it kɔntakt.

Yu tink se dɛn kin yuz PETG na do?

Standard PETG nɔ fɔ ɔtomɛtik wan we dɛn tek am as lɔng tɛm ɔdasay UV-rɛsistant matirial. Yuz wan fayn gred we gɛt UV we yu nid fɔ de na do.

Yu tink se dɛn kin kɔt ɛn drɔ PETG?

Yɛs. PETG kin kɔt, day kɔt, panch, drɔ ɛn rout yuz di rayt tul ɛn prɔsesin kɔndishɔn.

Yu tink se dɛn kin gi PETG wit fim we de protɛkt pɔsin?

Wan-sayd ɔ tu-sayd protɛktiv mask kin tɔk bɔt fɔ sɔm spɛsifikɛshɔn dɛn we dɛn dɔn pik. Kɔnfɛm if dɛn fɔ pul di mask bifo di vaykum fɔm.

Dɛn kin gi 35 sheet dɛn insay ɛni pak?

Di kɔrɛnt prodak sɔs de rɛfrɛns 35 sheet fɔ wan pak. Kɔnfɛm di finish sheet dimɛnshɔn, tik ɛn pak kwantiti we yu de aks fɔ kot bikɔs kɔstɔm-kat spɛsifikɛshɔn kin yuz difrɛn pak kwantiti.

Wetin na di MOQ fɔ PETG sheet?

di infכmeshכn fכ di prכdak we de naw de list wan MOQ we na lεk 1000kg. Kastom saiz, kɔlɔ, spɛshal gred ɛn pak kɔnfigyushɔn kin gɛt difrɛn tin dɛn we dɛn nid.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi tik, kɔt-shit dimɛnshɔn, vaykum-fɔma mɔdel, mold dimɛnshɔn, fɔm dip, optik rikwaymɛnt, protɛktiv mask, kwantiti fɔ ɛni pak, tɔtal kwantiti ɛn di kɔntri we yu de go.

Wetin Mek Yu Pik HSQY PETG Shit fɔ Vaykum Fɔm?

HSQY de saplae klia PETG shit ɛn rol fɔ vaykum fɔm, tɛmfɔmin, pak, displei, protɔtayp ɛn industrial kɔnvɔtin aplikeshɔn.

Dɛn kin tɔk bɔt di kɔstɔm tiknɛs, di rol wit, di flat-shit saiz ɛn di kɔt shit akɔdin to di kɔstɔma in vaykum-fɔm mashin ɛn finish-pat dizayn.

Fɔ dɛsktɔp vaykum-fɔmin projɛkt, sɛn di mashin mɔdel ɛn di shit dimɛnshɔn dɛn we dɛn nid togɛda wit di mold drɔin. HSQY kin afta dat evalyu di shit saiz, stat tiknes, pak kwantiti ɛn matirial gred agens di aktual fɔm prɔses.