Factory High Density Rigid PVC Foam Board ye ani PVC sɛbɛnfura Dilanbaga

Densité haute Rigide PVC Foam Board ye Dilanbaga

HSQY bɛ PVC fomu pankurun gɛlɛnw dilan taamasiyɛnw kama, nizɛri sɛbɛnni kama, minɛnw, dumunikɛyɔrɔ ni sanuyaso kabiniw, kɔnɔna panɛriw, yɔrɔw, jiralanw, CNC-masin yɔrɔw ani plastiki caman dilanni.

A janya minnu bɛ sɔrɔ, olu bɛ daminɛ milimɛtɛrɛ 1 ɲɔgɔn na ka se milimɛtɛrɛ 35 ma, ni density suganditaw bɛ daminɛ 0,35 fo 1,0g/cm³. sɛbɛnfura min bɛ kɛ hakɛ dantigɛlenw ye 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm ani 2050 × 3050mm ye.

Kulɛri jɛman ye kulɛri jɔnjɔn ye sɛbɛnni, taamasiyɛnw, kabiniw ani kɔnɔna masirili la. Kulɛri nɛrɛma, bilen, jɛman, bulu, jɛman ani kulɛri wɛrɛw fana bɛ se ka dilan ka kɛɲɛ ni density, thickness ani minimum order hakɛ wajibiyalen ye.

Fɛn minnu bɛ jira, olu ye PVC fomu pankurun gɛlɛn ye min janya ye milimɛtɛrɛ 18 ye, a ɲɛ ye fin ye walima min bɛ kɛ ka kɛɲɛ ni a yɛrɛ sago ye, a bonya hakɛ bɛ se milimɛtɛrɛ 1220 × 2440 ma. A janya, a bonya, a danfara ani a sanfɛla fini wɛrɛw bɛ sɔrɔ komandi caman na.

Densi hakɛ min bɛ sɔrɔ, o ye fɛn nɔgɔmanw ye, minnu ka dɔgɔn ani minnu ka bon. Sannikɛlaw ka kan ka density tigitigi jira min wajibiyalen don sanni u k'u jigi da ɲɛfɔli caman dɔrɔn kan 'high density PVC foam board.'

A dafalen sɛgɛsɛgɛ HSQY PVC fomu board range for free-foam, high-density ani customized sɛbɛnfura min bɛ kɛ sugandiliw.

Demand PVC Foam Board ye Sɔngɔko    Aw ye Board Samples ɲini

PVC Foam Board ye Fɛn dilannen Wideyo

Aw ye wideyo lajɛ min bɛ duguma walasa ka kunnafoni caman sɔrɔ HSQY PVC fomu pankurun gɛlɛnw kan, u janya minnu bɛ sɔrɔ, u bonya sɛbɛnfura min bɛ kɛ , u sanfɛla cogoya, u dilanni fɛɛrɛw ani u kɛcogo suganditaw.

Densité haute Rigide PVC Foam Board ye ye mun ye ?

PVC fomu pankurun gɛlɛn min ka bon kosɛbɛ, o ye kuloridi polivinili sɛbɛnfura min bɛ kɛ ye min bonyalen don, ni selilu kɔnɔna ka ɲi ani a kɛnɛma yɔrɔ ka gɛlɛn.

A selilɛri jɔcogo bɛ dɔ bɔ girinya la ni i y’a suma ni fɛn gɛlɛn gɛlɛnw ye PVC k’a sɔrɔ a bɛ gɛlɛya nafama mara, a sanfɛla gɛlɛya, a bɛ ji minɛ ani a dilanni baarakɛcogo.

A ka c’a la, o fɛn in bɛ wele fana ko PVC sɛbɛnfura min bɛ kɛ , PVC fomu sɛbɛnfura min bɛ kɛ , fomu PVC pankurun, PVC fomu panɛri gɛlɛn, Forex pankurun walima PVC taamasiyɛn pankurun.

A ka c’a la, danfara minnu ka bon, olu bɛ gɛlɛya caman di, ka u sanfɛla gɛlɛya, ka fɛnw sɔgɔ, ka juruw mara ani ka masinw sabati ka tɛmɛ jiracogo nɔgɔmanw kan.

Density wajibiyalenw tɛ sariya kɔnɔ dilanbaga bɛɛ kɔnɔ. O la, komandi ka kan ka density tigitigi jira g/cm³, ka fara a janya, muɲuli ani a kɛcogo wajibiyalen kan.

PVC fomu pankurun tɛ a yɛrɛma ka kɛ jɔli panɛli ye. Etajɛriw, kabiniw, tilayɔrɔw ani doni ta yɔrɔw ka kan ka dilan ani ka kɔrɔbɔ ka kɛɲɛ ni pankurun janya, u girinya, u janya, u sirilanw ani doni makɔnɔnenw ye.

Rigid PVC Foam Board ye Fɛn dilannenw Jaw

Rigid PVC Foam Board ye Ɲɛfɔliw

A laban na, a janya muɲuni, a ka density muɲuni, a hakɛw, a kulɛri, a sanfɛla, a lakanani filimu, a kɛnɛma baarakɛcogo ani a masinko cogoyaw ka kan ka dafa sɛbɛn kɔnɔ min dabɔra.

Free-Foam, Celuka ani Co-Extrudé PVC Foam Board ye

O fɛn dilanni fɛɛrɛ saba man kan ka jate fɛn kelenw ye. Sannikɛlaw ka kan k’a jira ni fɔlɔfɔlɔ ye sɛbɛnni kɛcogo ɲuman ye, a girinya dɔgɔyali, fari gɛlɛn, kuru minɛcogo, laminicogo walima CNC dakun ɲuman.

PVC Foam Board ye Density sugandicogo

Density bɛ nɔ bila sɛbɛnfura min bɛ kɛ girinya la, a gɛlɛya la, a kɔrɔtacogo la, a sanfɛla gɛlɛya la, a ka juruw marali la, a ka masin sabatili la ani a musaka la.

O density ranges ye sugandili bilasiralikanw ye sanni ka kɛ diɲɛ bɛɛ ka izini danfara ye. Baara laban bɛ bɔ a dilanni na, a dilanni fɛɛrɛ, a bonya, a fari cogoya ani a sɛgɛsɛgɛli.

PVC Foam Board ye Gafe min bɛ kɛ ni jiribolo ye

Kɔrɔya dɔrɔn tɛ fanga dantigɛ. Board density, un supported span, edge design, fastening method, temperature ani doni makɔnɔnen fana ka kan ka jateminɛ.

Nafa jɔnjɔn minnu bɛ sɔrɔ PVC fomu sɛbɛn gɛlɛn na

A ka nɔgɔn ni a ka gɛlɛya ye min nafa ka bon

Selulɛri kɔnɔna min bonyalen don, o bɛ dɔ bɔ pankurun girinya la ni i y’a suma ni fɛn gɛlɛn ye min bɛ bɛn o ma PVC sɛbɛnfura min bɛ kɛ , o bɛ dɛmɛ ka dɔ bɔ a minɛcogo ni a tacogo la.

Ji Minɛcogo Dɔgɔya

PVC fomu pankurun ji minɛni ka dɔgɔn, wa a tɛ funu walima ka toli cogo kelen na i n’a fɔ jirisunba caman minnu ma furakɛ.

Surface min bɛ se ka imprimer, o ye sɔgɔsɔgɔ ye

Matte finman, satin ani yɔrɔ nɔgɔlenw bɛ se ka UV sɛbɛnni fla-fla, sɛbɛnni ɛkran, vinyl ja, ja ani lamination dɛmɛ bɛnkan sɛgɛsɛgɛli kɔfɛ.

CNC nɔgɔya ani Fabrication Mecanique

Tablo bɛ se ka tigɛ, ka sɔgɔ, ka sira tigɛ, ka ja, ka sɔgɔ, ka die tigɛ ani ka siri ni masin ye ni baarakɛminɛn bɛnnenw ye ani baarakɛcogo paramɛtiriw.

Ji ni sɔgɔsɔgɔninjɛ kunbɛnni

PVC fomu sɛbɛnfura min bɛ kɛ bɛnnen don sokɔnɔna sigida caman na minnu ka ɲi ani baara minnu bɛ kɛ saniyafɛnw na minnu bɛ kɛ tuma bɛɛ walima minnu bɛ fɛnw tiɲɛ.

Density ni Kulɛri ladamulen

Sannikɛlaw bɛ se ka density, thickness, sɛbɛnfura min bɛ kɛ size, color, surface finish, protective film, packaging ani labeling ɲɛfɔ ka kɛɲɛ ni a dilanni seko ye.

Farikolo cogoyaw Rigid PVC Foam Board ye

Olu ye nafaw ye minnu bɛ bɔ fɛn dilannenw kunnafoniw na minnu bɛ yen. Jateminɛ lakikaw bɛ se ka ɲɔgɔn ta ka kɛɲɛ ni density, thickness, formulation, test temperature, sample direction ani test method ye.

Vicat softening temperature ye laboratuwari fɛnw jiralan ye, wa a man kan ka kɔrɔfɔ iko fɛn dilannen dɔ ka baarakɛcogo funteni min bɛ fɔ ka taa a fɛ.

PVC Foam Board ye ka ɲɛsin Sɛbɛnni ni taamasiyɛnw ma

PVC fomu pankurun finman gɛlɛn bɛ kɛ ka caya i n’a fɔ taamasiyɛnw, sannikɛyɔrɔ jiralanw, menu pankurunw, jirali ja ani masirifɛnw sɛbɛnnenw.

Printing-grade board ka kan ka kɛ sababu ye ka yɔrɔ finman kɔrɔsilen di, a janya bɛ to ka kɛ, a ka kan ka kɛ fla ye min bɛ sabati ani yɔrɔ min bɛ bɛn tintiri sugandilen ma.

PVC Foam Board ye ka ɲɛsin Kabini ni Mebɛriw ma

PVC fomu pankurunw bɛ se ka kɛ dumunikɛyɔrɔ kabiniw ye, sanuyaso fɛnw, finidoncogo, fɛnw bilayɔrɔw, da, fɛnmarayɔrɔw ani minɛnw panɛriw.

Ni aw ye a suma ni MDF walima particleboard furakɛbali ye, PVC fomu board tɛ ji ni funu minɛ o cogo kelen na. O la, a bɛ sugandi tuma caman na sokɔnɔna sigidaw la minnu ka ɲi.

Mebɛriw kɛli ka kan ka kuru bɔli fanga jateminɛ, ka charnière marali, ka kɔrɔta, ka sɔgɔsɔgɔ, ka surface gɛlɛya ani ka doni kuntaalajan jateminɛ.

PVC fomu pankurun min ka bon kosɛbɛ, o man kan ka kɛ a yɛrɛma i n’a fɔ plywood sinsinni tilennen ye. Panɛli span, dɛmɛnan karamɔgɔ, sirilanw ani doni makɔnɔnen ka kan ka tiɲɛ.

PVC Foam Board ye ni PVC sɛbɛnfura ka baarakɛcogo.

• Piblisite ni taamasiyɛnw: Taamaʃyɛnw sɛbɛnnenw, pankartiw, dumunifɛnw tablo, feerekɛyɔrɔw jiralanw, jirali ja ani sannikɛyɔrɔ panɛriw.

• Mebɛriw ni kabiniw: Cuisini kabiniw, sanuyaso vanitiw, finidoncogo, etajɛriw ani minɛnw yɔrɔw.

• Kɔnɔna masirili : Kogow, sanfɛla fɛnw, yɔrɔw, masirilanw ani jiralikɛnɛw.

• CNC dilanni: Sɛbɛnni siraw, misaliw, modɛliw, prototypes, masin yɔrɔw ani jiralan yɔrɔw.

• Sɛbɛnni ni a bilali: UV-print substrates, fotow sigicogo, vinyl graphiques ani laminés displays.

• Baara minnu bɛ kɛ iziniw kɔnɔ: Panɛriw minnu bɛ mɔgɔ tanga, fɛnw minnu tɛ sɔgɔ, misaliw ani fɛn dilannenw minnu tɛ doni ta.

Tigɛ, CNC Routing ani Fabrication

PVC fomu pankurun gɛlɛn bɛ se ka baara kɛ ni jirifeere ni plastiki-dilanminɛn caman ye.

Saw Tigɛ

Sɔgɔsɔgɔninjɛ lamininenw, panɛli sɔgɔlanw ani jigsaww bɛ se ka kɛ ni ɲinw finmanw ye minnu bɛnnen don. sɛbɛnfura min bɛ kɛ ka kan ka dɛmɛ kosɛbɛ walasa ka yɛrɛyɛrɛ ni dakun tiɲɛni dɔgɔya.

CNC Routing ani Graving (Sɔrɔko ni Jatebɔ).

Router teliya, balo hakɛ, tigɛlan jateminɛcogo ani a juguya tɛmɛsira kelen-kelen bɛɛ ka kan ka ladilan ka kɛɲɛ ni pankurun density ni thickness ye walasa ka dakun saniyalenw bɔ ani ka funteni camanba dɔgɔya.

Fororage ani Fastening Mekaniki

Tablo bɛ se ka sɔgɔ ka siri ni juruw, rivet walima bololanɛgɛw ye. Piloti-dingɛ hakɛ, a dakun janya, kolanɛgɛ hakɛ ani doni makɔnɔnen ka kan ka tiɲɛ.

Bonding (Bonding) min bɛ kɛ ni nɛgɛ ye

Siman minnu bɛ se ka kɛ PVC ye, olu bɛ se ka sugandi ka kɛɲɛ ni fɛnɲɛnamafagalanw dilanni ye ani fɛnw sirilenw.

Laser Tigɛcogo

PVC tigɛcogo kɔrɔlen tɛ kɛ ni laser ye, a ka c’a la, a man ɲi barisa funteni PVC bɛ se ka sisi sɔgɔlenw bɔ, kulori bɛ minnu na, minnu bɛ se ka tiɲɛni kɛ baarakɛlaw ni minɛnw na.

Masina tigɛcogo, sira tigɛcogo walima die tigɛcogo ka kan ka kɛ cogoya la fo ni PVC -baarakɛminɛn kɛrɛnkɛrɛnnenw ni bɔli fɛɛrɛ bɛnnenw bɛ yen.

Jiko ni sigida minnu ka nɔgɔ

PVC fomu pankurun ji minɛni ka dɔgɔn, wa a bɛ kɛ ka caya sanuyasow la, dumunikɛyɔrɔw la, kolikɛnɛw la, dugujukɔrɔyɔrɔw la ani kɔnɔna yɔrɔ nɔgɔlen wɛrɛw la.

Tablo yɛrɛ tɛ toli walima ka funu i n’a fɔ jirisunw minnu dilannen don ni jiriw ye minnu ma furakɛ, nka a sigili dafalen tɛ ji bɔ a yɛrɛma.

Jogindaw, juruw dingɛw, dɛmɛnanw, nɔrɔlanw ani kogow cɛmancɛw ka kan ka dilan walasa ka jisuma makɔnɔnen sɔrɔ.

Kɛnɛma baarakɛcogo ani UV Resistance

Standard white PVC foam board bɛ ladilikan di fɔlɔ so kɔnɔ taamasiyɛnw, sɛbɛnni, minɛnw ani kɔnɔna baarakɛcogo la fo ni kɛnɛma jate kɛrɛnkɛrɛnnen dɔ dafara.

Kɛnɛyako bɛ se ka kɛ sababu ye ka kulɛri caman cili, ka kretiɛnw wuli, ka u wuli walima ka masin baara dɔgɔya ka kɛɲɛ ni waati cogoya ye, sɛbɛnfura min bɛ kɛ kulɛri, a bonya, a sirili ani a sigicogo.

Kɛnɛma porozɛ kuntaalajan ka kan ka UV-stabilised grade (UV-stabilisé grade) jira, a jirali waati makɔnɔnen, dugukolo yɔrɔ, sɛbɛnfura min bɛ kɛ janya ani a siricogo.

Sumaya bonya ka kan ka jateminɛ ni sigili yɔrɔ bɛnnen dili ye ani ka panɛri belebelebaw bali kojugu.

Tasuma baarakɛcogo ni lakanani

PVC fomu pankurun man kan ka ɲɛfɔ caman na ko tasuma tɛ se ka don a la.

Jeni kɛcogo bɛ bɔ furakɛlicogo, a density, thickness, sample orientation, conditioning ani test method de la.

Fɛn minnu bɛ fɔ i n’a fɔ yɛrɛfaga, UL 94, Class A walima tasuma danfaralen wɛrɛ, olu ka kan ka kɛ dɔrɔn ni kunnafoni sɛbɛn bɛ fɛn dilannen hakɛ ni a bonya tigitigi ɲɛfɔ.

PVC ka funteni, a jeni walima a ka baara funteni min tɛ kɔlɔsi, o bɛ se ka sisi faratilenw ni sisi bɔ. Fɛn dilanni yɔrɔw ka kan ka kɛ ni fiɲɛbɔyɔrɔ bɛnnenw ye, buguri bɔli ani baarakɛyɔrɔ lakanani fɛɛrɛw.

PVC Foam Board ye ni Solid PVC sɛbɛnfura ani MDF

Jogoɲumanya kɔlɔsili ka ɲɛsin PVC Foam Board ye ma.

• PVC resin ni fɛnɲɛnamafagalanw sɛgɛsɛgɛli.

• Sheet janya ni a janya muɲuni.

• Densi ni density muɲuni.

• Sɛbɛn janya, a bonya, a cɛmancɛ ani a kɛrɛ.

• Surface smoothness, gloss ani texture.

• Point finman, kulɛri danfara ani batch consistency.

• Flatness, bowing ani warpage (kɛlɛli).

• Kɔnɔnatumuw jɔcogo ani a dakunw cogoya.

• Nɔgɔ nɛrɛma, nɔgɔw, dingɛw ani dugukolo sanfɛla tiɲɛni.

• Printing, adhesion ani lamination baarakɛcogo.

• CNC routing, drilling ani tigɛ baarakɛcogo.

• Viru marali ani masinw sɛgɛsɛgɛli yɔrɔ minnu na a mago bɛ a la.

• Ji minɛni, Vicat ani tasuma sɛgɛsɛgɛli yɔrɔ minnu kofɔlen don.

• Filimu lakanani, labeliw, pakew ani palɛti sɛgɛsɛgɛli.

Custom PVC Foam Board ye Sugandili

• A janya bɛ daminɛ milimɛtɛrɛ 1 ɲɔgɔn na ka se milimɛtɛrɛ 35 ma.

• Densiw bɛ daminɛ 0,35 ɲɔgɔn na ka se 1,0g/cm³.

• 915 × 1830mm, 1220 × 2440mm, 1560 × 3050mm ani 2050 × 3050mm sɛbɛnfura min bɛ kɛ s.

• sɛbɛnfura min bɛ kɛ ani tigɛ-yɔrɔ hakɛw labɛnna.

• Kulɛri finman, nɛrɛma, bilenman, jɛman, bulu, wuluwulu ani kulɛriw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Mati, satin, yɔrɔ nɔgɔlenw ani ɲɛgɛnw.

• Sɛbɛnni, taamasiyɛnw, mebɛriw ani CNC kalataw.

• Free-foam ani application-specific skinned sugandiliw.

• Kɛnɛma furakɛli minnu bɛ sabati ni UV ye.

• Filimu min bɛ mɔgɔ tanga ani sɛbɛnfura min bɛ kɛ labeli minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• PE bɔrɔ, kraft papier, kartɔn ani export-pallet pakew.

Foroko ni fɛnw bilali jamana kɔkan

Misaliw pake : Misi tigɛlenw bɛ se ka lakana ni filimu, kraft papier walima kartɔnw ye.

Fɛnɲɛnɛma lakanani : PE bɔrɔw, lakanani filimu, kraft papier ani nkɔni lakanani bɛ se ka kɛ ka kɛɲɛ ni dugukolo sanfɛla ni bolifɛnw wajibiyalenw ye.

Palɛti pakew: Sɛbɛnw bɛ se ka dalajɛ plywood kan walima ka bɔ jamana wɛrɛw la palɛtiw kan ni sirilanw ni lakanani panɛriw ye.

Kɛrɛnkɛrɛnnenya la sɛbɛnni: sɛbɛnfura min bɛ kɛ taamasiyɛnw, palɛti taamasiyɛnw, kartɔn taamasiyɛnw ani pakew lisi minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka di.

Minɛn doni : Doni hakɛ bɛ bɔ a bonya, a girinya, sɛbɛnfura min bɛ kɛ hakɛw, a palɛti dilanni ani a girinya dantigɛli sariya siratigɛ la.

Waati min bɛ kɛ : A ka c’a la, a dilanni bɛ kɛ tile 15-20 ɲɔgɔn na, a ɲɛfɔcogo, a hakɛ, a foroko ani a bilali dafalen kɔfɛ.

PVC Foam Board ye SGS Sɛbɛn

SGS sɛbɛn min bɛ sɔrɔ, o telesarse walasa ka kunnafoni sɔrɔ. Aw bɛ a sɛgɛsɛgɛ ko kunnafoni bɛ kuma a dantɛmɛcogo tigitigi kan, a bonya, a kulɛri, a kɛcogo ani a kɛcogo min bɛ sɔrɔ komandi kɔnɔ.

   PVC Foam Board ye SGS Sɛbɛn telesarse

Kunnafoni minnu ka kan ka kɛ PVC Foam Board ye Quote

• A laban na : taamasiyɛnw, sɛbɛnni, kabini, minɛnw, tilayɔrɔ, kogo panɛli walima CNC yɔrɔ.

• A ka kan ka kɛ ka a janya ni a bonya muɲu.

• Density ni density tolerance wajibiyalen don.

• Sɛbɛn janya, a bonya ani a tigɛcogo muɲuni.

• Kulɛri finman, nɛrɛma walima min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Mate, satin, finimugu nɔgɔlen walima a bɛ manamana.

• Free-foam, skinned walima fɛn wɛrɛ min ka kan ka kɛ.

• Printing, laminating, CNC routing walima fastening kɛcogo.

• So kɔnɔ walima kɛnɛma sigili.

• UV, tasuma, kemikɛli walima masin sɛgɛsɛgɛli wajibiyalenw.

• Filimu lakanani ni taamasiyɛnw wajibiyalenw.

• Koman hakɛ ani san hakɛ jateminɛlen.

• Packing kɛcogo ani destination port.

• Lase don min wajibiyalen don ani jagokɛcogo.

Aw ka PVC Foam Board ye wajibiyalenw ci

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC Foam Board ye feerekɛla ye?

• PVC fomu gɛlɛn sɛbɛnfura min bɛ kɛ s ka bɔ milimɛtɛrɛ 1 ɲɔgɔn na ka se milimɛtɛrɛ 35 ma.

• Density suganditaw bɛ bɔ 0,35 ɲɔgɔn na ka se 1,0g/cm³.

• sɛbɛnfura min bɛ kɛ hakɛ dantigɛlenw ni cogoya belebelebaw.

• Sɛbɛnni, taamasiyɛnw, mebɛriw ani CNC kalataw.

• Kulɛri finmanw ni kulɛriw dilanni min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Surface fini min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani filimu min bɛ mɔgɔ tanga.

• Misaliw ye sɛbɛnni, tigɛ, siraw ani sirili sɛgɛsɛgɛliw ye.

• Jogoɲumanya sɛgɛsɛgɛli ka kɛɲɛ ni fɛn ɲɛfɔlenw ye minnu dabɔra.

• Jagokɛlaw ka pakew, taamasiyɛnw ani diɲɛ-cikan dɛmɛni.

Sani u ka caman dilan, HSQY b’a ɲini ka misali dɔ jateminɛ ni kiliyan ka sɛbɛnnikɛlan yɛrɛ ye, CNC routeur, adhesive, fastener, cabinet hardware walima installation system.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

HSQY ka seereyaw ani diɲɛ kɔnɔ jiralifɛnw

Seereyaw ni sɛgɛsɛgɛli rapɔɔri minnu bɛ sɔrɔ, olu ka kan ka lajɛ ni PVC fomu pankurun hakɛ tigitigi ye, a bonya, a density, a kulɛri ani a laɲini sugu.

Ɲininkali minnu bɛ kɛ tuma caman na Rigid PVC Foam Board ye kan.

PVC fomu pankurun gɛlɛn min ka bon kosɛbɛ, o ye mun ye?

O ye PVC sɛbɛnfura min bɛ kɛ gɛlɛn ye min bonyalen don ni selilu kɔnɔna ye. Grade minnu ka bon kosɛbɛ, olu bɛ dɔ fara gɛlɛya kan, ka sanfɛla gɛlɛya ani ka masinw sabatili di mebɛriw, kabiniw, CNC yɔrɔw, taamasiyɛnw ani kɔnɔna panɛriw ma.

Density jumɛn bɛ jate density high-density PVC fomu board ye?

Duniya bɛɛ ka dakun kelen tɛ yen. HSQY hakɛ kɔnɔ, kalataw bɛ 0,35-1,0g/cm⊃3 sanfɛyɔrɔ kɛrɛfɛ; range bɛ density belebele di, nka density tigitigi ka kan ka sɛbɛn order specification kɔnɔ.

Danfara jumɛn bɛ PVC fomu pankurun ni fɛn gɛlɛn PVC sɛbɛnfura min bɛ kɛ cɛ ?

PVC fomu pankurun bɛ ni selilɛri ye wa a ka nɔgɔn. Solid rigid PVC sɛbɛnfura min bɛ kɛ tɛ fomu ye, a ka bon ani a bɛ sugandi cogoya la ni kemikoro resistance ka bon walima ni structure solide de wajibiyalen don.

Danfara jumɛn bɛ free-foam ni Celuka PVC board cɛ?

A ka c’a la, free-foam board bɛ ni selilɛri jɔcogo kelen ye ka tɛmɛ, wa a bɛ kɛ ka caya sɛbɛnni ni taamasiyɛnw dilanni na. Celuka board kɛnɛma fari ka bon, wa a ka teli ka sugandi kabiniw, minɛnw ani baarakɛcogo minnu bɛ a ɲɛda gɛlɛya kosɛbɛ.

PVC fomu board co-extrudé ye mun ye?

Co-extruded board bɛ ni foam core ye PVC surface layers gɛlɛnw cɛ, o bɛ surface nɔgɔlen di ani ka dɔ fara a ka se ka sɔgɔsɔgɔ ni masin tiɲɛniw kunbɛn.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

HSQY bɛ PVC fomu pankurun gɛlɛnw dilan k’a ta milimɛtɛrɛ 1 ɲɔgɔn na ka se milimɛtɛrɛ 35 ma. Sɔrɔ laban bɛ bɔ density, sɛbɛnfura min bɛ kɛ bonya, kulɛri ani a dilanni fɛɛrɛ la.

sɛbɛnfura min bɛ kɛ hakɛ jumɛnw bɛ sɔrɔ?

A hakɛ dantigɛlenw ye 915 × 1830mm, 1220 × 2440mm, 1560 × 3050mm ani 2050 × 3050mm ye. Tigɛ hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu fana bɛ se ka jateminɛ.

Yala 18mm PVC fomu pankurun bɛnnen don kabiniw ma wa?

18mm cɛmancɛ walima density caman hakɛ bɛnnen bɛ se ka kɛ kabini yɔrɔw la. Viru minɛcogo, charnières, span, doni ani dɛmɛnan jɔcogo ka kan ka sɛgɛsɛgɛ.

Yala PVC fomu pankurun ji tɛ se ka don wa?

Ji minɛni ka dɔgɔn pankurun in na, wa a tɛ funu i n’a fɔ MDF furakɛbali. Kabini, kogo walima panɛri sigili dafalen bɛ ji sɔrɔ dɔrɔn ni jogindaw, sirilanw ani ɲɔgɔndanw dilannen don ka ɲɛ.

Yala PVC fomu pankurun bɛ se ka kɛ kɛnɛma wa?

UV-stabilisé grade sugandilenw bɛ se ka kɛ kɛnɛma. So kɔnɔ pankurun jɔnjɔn man kan ka fɔ a yɛrɛma ko a bɛnnen don kɛnɛma waati jan kɔnɔ.

Yala PVC fomu pankurun bɛ se ka sɛbɛn k’a ɲɛsin a yɛrɛ ma wa?

Awɔ. Kalanso bɛnnenw bɛ se ka UV flati ni ekran sɛbɛnni dɛmɛ. Enki nɔrɔli, a kɛnɛyali, a kulɛriw lasegincogo ani a sanfɛla bɛnkan ka kan ka kɔrɔbɔ fɔlɔ.

Yala PVC fomu board bɛ se ka CNC routed wa?

Awɔ. A bɛ se ka CNC routed, engraved ani milled. Tigɛbaga jateminɛ, sɔgɔli teliya, balo hakɛ ani a juguya tɛmɛsira kelen-kelen bɛɛ ka kan ka bɛn ni pankurun density ni thickness ye.

Yala PVC fomu pankurun bɛ se ka sɔgɔ ani ka siri wa?

Awɔ. A ka c’a la, grade minnu ka bon, olu bɛ juruw maracogo ɲɛ. Piloti dingɛw, dakunw janya, kolanfɛnw ani doni makɔnɔnenw ka kan ka sɛgɛsɛgɛ.

Nɛgɛ jumɛn bɛ se ka kɛ PVC fomu pankurun na?

Siman min bɛ bɛn PVC ma, contact adhesive walima structural adhesive bɛ se ka kɛ ka kɛɲɛ ni joginni ni a sirilen ye. Nɔrɔli ka kan ka sɛgɛsɛgɛ fɛn dilanni misali dɔ kan.

Yala PVC fomu pankurun bɛ se ka tigɛ ni laser ye wa?

A ka c’a la, laser tigɛcogo kɔrɔ man ɲi barisa PVC min sumana, o bɛ se ka sisiw bɔ minnu bɛ se ka tiɲɛ, kulori bɛ minnu na. A ka c’a la, masinw tigɛcogo walima CNC sira tigɛcogo de ka fisa.

Yala PVC fomu pankurun tasuma tɛ se ka don wa?

PVC fomu pankurunba si man kan ka ɲɛfɔ ko tasuma tɛ se ka don a la. Tasuma baarakɛcogo ka kan ka dɛmɛ ni sɛgɛsɛgɛli rapɔɔri ye min bɛ a hakɛ tigitigi, a girinya ani a bonya ɲɛfɔ.

Yala PVC fomu pankurun bɛ foromadehidi sɔrɔ wa?

PVC fomu pankurun tɛ dilan ni jirisunw ye minnu sirilen don foromadehidi la. Fɛn kɛrɛnkɛrɛnnen minnu bɛ fɔ ko dantigɛlen don, olu ka kan ka tiɲɛ hali bi ni sɛbɛnw ye minnu bɛ a furakɛcogo tigitigi jira.

Yala PVC fomu pankurun bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PVC fomu pankurun bɛ se ka segin ka kɛ fɛn wɛrɛ ye fɛɛrɛko siratigɛ la, nka lasegincogo yɛrɛ bɛ bɔ sigida lajɛ, a tilacogo, a dilanni, a sanfɛla filimu, a sɛbɛnni, a nɔrɔli ani a nɔgɔli la.

Yala PVC min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ fomu pankurun kɔnɔ wa?

Fɛn minnu bɛ se ka kɛ fɛn wɛrɛw ye, olu bɛ se ka kɛ pankurun jɔcogo sugandilenw kɔnɔ. Fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu bɛ se ka nɔ bila kulɛri, density, surface quality, masinko ɲɔgɔndan ani baarakɛcogo labɛnni na.

Koman hakɛ fitinin ye mun ye?

MOQ sariyalen min bɛ nin fura in na, o bɛ se mɛtɛrɛ tɔni 3 ma. Kulɛriw, danfara minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, hakɛ belebelebaw walima fɛn ɲɛfɔcogo ɲagaminenw bɛ se ka hakɛ wɛrɛw de wajibiya.

Yala misaliw bɛ sɔrɔ fu wa?

Stock samples fu bɛ se ka sɔrɔ walasa ka a janya, a density, surface, printing ani machining lajɛ. A ka c’a la, doni bɛ sara sannikɛla fɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 15-20 ɲɔgɔn ta, a ɲɛfɔcogo, a hakɛ, a foroko ani a bilali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ baarakɛcogo, a bonya, a density, sɛbɛnfura min bɛ kɛ hakɛ, a kulɛri, a laban, a sɛbɛnni walima a dilanni fɛɛrɛ, a hakɛ, a foroko, a taayɔrɔ ani a sɛgɛsɛgɛli sariyaw wajibiyalenw di.

Aw ye Custom PVC Foam Board ye Quote sɔrɔ

HSQY Plastic Group ko la

Changzhou Huisu Qinye Plastic Group Co., Ltd. bɛ PVC fomu pankurun gɛlɛnw ni plastiki sɛbɛnfura min bɛ kɛ wɛrɛw dilan taamasiyɛnw, sɛbɛnni, kabiniw, mebɛriw, kɔnɔna masirili ani izini dilanni kama.

HSQY bɛ dɛmɛ don jatebɔlaw, taamasiyɛn dilannikɛlaw, mebɛri dilannikɛlaw, jɔli-minɛnw feerelaw ani plastiki dilannikɛlaw ma ni misali jateminɛ ye, ka fɛn dilanni kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka sɛgɛsɛgɛli kɛ ani ka fɛnw bila jamana kɔkan.

Aw ye sɔngɔko sɛbɛn ɲini ani Sample