Factory High Density Rigid PVC Foam Board ne PVC Krataa Yɛfo

High Density Rigid PVC Foam Board Ɔyɛfo

HSQY yɛ PVC foam boards a ɛyɛ den ma nsɛnkyerɛnne, dijitaal tintim, dan mu nneɛma, adididan ne aguaree nkuku, mu panels, mpaapaemu, ɔyɛkyerɛ a wɔde kyerɛ, CNC-machined components ne general plastic fabrication.

Nsuo a ɛwɔ hɔ no firi bɛyɛ 1mm kɔsi 35mm, a density options firi bɛyɛ 0.35 kɔsi 1.0g/cm³. Nkratafa akɛse a wɔahyɛ da ayɛ no bi ne 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm ne 2050 × 3050mm.

White yɛ kɔla a wɔde tintim, nsɛnkyerɛnne, nkuku ne dan mu nneɛma a wɔde siesie. Wobetumi ayɛ tuntum, kɔkɔɔ, kɔkɔɔ, bruu, ahabammono ne kɔla afoforo a wɔayɛ no sɛnea wɔpɛ nso sɛnea density, thickness ne minimum order dodow a wɔhwehwɛ te.

Nneɛma a wɔakyerɛw a wɔakyerɛ no yɛ 18mm rigid PVC foam board a ɛwɔ kɔla fitaa anaa nea wɔayɛ no sɛnea wɔpɛ, a ne kɛse yɛ 1220 × 2440mm. Afoforo thicknesses, dimensions, densities ne surface finishes wɔ hɔ ma bulk orders.

Density range a ɛwɔ hɔ no bi ne grades a emu yɛ hare, medium-density ne high-density grades. Ɛsɛ sɛ adetɔfo kyerɛ density pɔtee a wɔhwehwɛ sen sɛ wɔde wɔn ho bɛto nkyerɛkyerɛmu a ɛwɔ hɔ nyinaa 'high density PVC foam board.' no nkutoo so.

Hwehwɛ nea edi mũ no mu HSQY PVC foam board ahorow ma free-foam, high-density ne customized krataa options.

Bisa PVC Foam Board Bo a Wɔbɔ    Bisa Boayikuw Nhwɛsode

PVC Foam Board Nneɛma a Wɔde Yɛ Video

Hwɛ video a ɛwɔ aseɛ ha no na sua pii fa HSQY rigid PVC foam boards, ne kɛseɛ a ɛwɔ hɔ, ne kɛseɛ, ne soro su, akwan a wɔfa so yɛ ne sɛdeɛ wɔde di dwuma.

Dɛn ne High Density Rigid PVC Foam Board?

High-density rigid PVC foam board yɛ polyvinyl chloride krataa a wɔatrɛw mu a ɛwɔ nkwammoaa mu ntini a ɛyɛ fɛ na ɛwɔ akyi a ɛyɛ den.

Ne nkwammoaa nhyehyɛe no brɛ emu duru ase sɛ wɔde toto PVC a ɛyɛ den a ɛyɛ den ho bere a ɛkura mfasoɔ a ɛyɛ den, soro denden, nsuo a ɛko tia ne fabrication adwumayɛ.

Adeɛ no nso wɔtaa frɛ no ntrɛwmu PVC krataa, PVC foam krataa, foamed PVC board, rigid PVC foam panel, Forex board anaa PVC sɛnkyerɛnne board.

Higher-density grades taa ma rigidity kɛse, surface hardness, impact resistance, screw retention ne machining stability sen display grades a emu yɛ hare.

Wɔnnyɛ density ahwehwɛde ahorow no gyinapɛn wɔ adwinnan biara mu. Enti ɛsɛ sɛ ahyɛde bi kyerɛ density pɔtee wɔ g/cm³, ne ne kɛse a wɔhwehwɛ, abodwokyɛre ne dwumadie.

PVC foam board nyɛ ɔdan a wɔde si dan ho mfonini a ɛyɛ ne ho. Ɛsɛ sɛ wɔyɛ shelves, cabinets, partitions ne load-bearing components na wɔsɔ hwɛ sɛnea board no kɛse, density, span, fasteners ne adesoa a wɔhwɛ kwan te.

Rigid PVC Foam Board Nneɛma a Wɔde Yɛ Mfonini

Rigid PVC Foam Board Nsɛm a Wɔka Kyerɛ

Ɛsɛ sɛ wɔsi awieɛ thickness tolerance, density tolerance, dimensions, kɔla, surface, protective film, abɔnten adwumayɛ ne mfiridwuma su so dua wɔ specification a wɔakyerɛw a wɔapene so mu.

Free-Foam, Celuka ne Co-Extruded PVC Foam Board

Ɛnsɛ sɛ wɔfa akwan abiɛsa a wɔfa so yɛ nneɛma no sɛ nneɛma a ɛyɛ pɛ. Ɛsɛ sɛ adetɔfo kyerɛ sɛ ebia nea ɛho hia titiriw ne tintim su, emu duru a ɛba fam, honam ani a ɛyɛ den, screw kura, lamination anaa CNC ano su.

Sɛnea Wobɛpaw PVC Foam Board Density

Density nya krataa mu duru, rigidity, bending resistance, surface hardness, screw retention, machining stability ne nneɛma ka.

Saa density ranges yi yɛ paw akwankyerɛ mmom sen amansan nnwuma nkyekyɛmu. Adwumayɛ a etwa to no gyina nnuru a wɔde yɛ, ɔkwan a wɔfa so yɛ, ne kɛse, honam ani nhyehyɛe ne sɔhwɛ so.

PVC Foam Board Nneɛma a Ɛyɛ Fɛ Ho Akwankyerɛ

Ɛnyɛ nea ɛyɛ den nkutoo na ɛkyerɛ ahoɔden. Ɛsɛ sɛ wosusuw board density, unsupported span, edge design, fastening kwan, ɔhyew ne adesoa a wɔhwɛ kwan nso ho.

Mfaso Titiriw a Ɛwɔ Rigid PVC Foam Sheet so

Ɛyɛ hare a Mfaso wɔ so a ɛyɛ den

Cellular core a wɔatrɛw mu no ma board mu duru so tew bere a wɔde toto PVC krataa a ɛyɛ den a ɛne no sɛ ho no, na ɛboa ma wɔtew nneɛma a wɔde di dwuma ne akwantu a wɔhwehwɛ so.

Nsu a Wɔtwetwe a Ɛba Fam

PVC foam board no ntumi nkɔ nsu pii na ɛnhohoro anaasɛ ɛnporɔw wɔ ɔkwan koro no ara so te sɛ nnua a wɔde ayɛ nnua pii a wɔansiesie no.

Smooth Printable Ɔfa a Wotumi tintim

White matte, satin ne smooth surfaces betumi aboa flatbed UV tintim, screen tintim, vinyl mfonini, mfonini ne lamination akyi compatibility sɔhwɛ.

Easy CNC ne Mfiridwuma Fabrication

Wobetumi de nnwinnade a ɛfata ne nneɛma a wɔde yɛ adwuma no atwitwa board no, atutu, ayɛ no kwan, akyerɛw, ayam, atwa no awu na wɔde mfiri akyekyere no.

Nsuo ne Nsuo a Ɛko Tia

PVC foam krataa fata ma dan mu mmeae a ɛhɔ yɛ nwini pii ne nneɛma a wɔde di dwuma a wɔde nneɛma a wɔtaa de tew nneɛma ho anaa tebea horow a ɛyɛ hyew di dwuma.

Amanne Density ne Kɔla

Adetɔfo betumi akyerɛ density, thickness, krataa kɛse, kɔla, surface finish, ahobammɔ film, packaging ne labeling sɛnea production feasibility.

Nneɛma a ɛwɔ Rigid PVC Foam Board mu

Eyinom yɛ nkyerɛkyerɛmu gyinapɛn ahorow a efi nneɛma a wɔyɛ no ho nsɛm a ɛwɔ hɔ dedaw no mu. Nea ebefi mu aba ankasa betumi ayɛ soronko wɔ density, thickness, formulation, sɔhwɛ hyew, nhwɛsode akwankyerɛ ne sɔhwɛ kwan so.

Vicat softening temperature yɛ aduruyɛdan mu nneɛma a ɛkyerɛ na ɛnsɛ sɛ wɔkyerɛ ase sɛ ɛyɛ hyew a wɔkamfo kyerɛ sɛ ɛkɔ so yɛ adwuma wɔ ade a wɔayɛ no mu.

PVC Foam Board a wɔde tintim ne nsɛnkyerɛnne

White rigid PVC foam board yɛ nea wɔde di dwuma kɛse sɛ substrate ma nsɛnkyerɛnne, point-of-purchase displays, menu boards, ɔyɛkyerɛ mfonini ne printed decorative panels.

Ɛsɛ sɛ printing-grade board ma controlled white point, constant thickness, stable flatness ne ɔfasu a ɛfata ma ink nhyehyɛe a wɔapaw no.

PVC Foam Board a wɔde yɛ Cabinets ne Furniture

Wobetumi de PVC foam boards a ɛyɛ medium- ne high-density ayɛ kitchen cabinets, aguaree vanities, wardrobes, shelves, apon, drawer components ne decorative furniture panels.

Sɛ wɔde toto MDF anaa particleboard a wɔansiesie no ho a, PVC foam board nnye nsuo na ɛhonhon wɔ ɔkwan koro no ara so. Enti wɔtaa paw no ma mmeae a ɛhɔ yɛ nwini wɔ dan mu.

Ɛsɛ sɛ furniture applications hwɛ screw pull-out ahoɔden, hinge retention, bending, creep, soro hardness ne bere tenten loading.

Ɛnsɛ sɛ wɔde PVC foam board a ɛyɛ den no di dwuma ara kwa sɛ nea wɔde besi plywood ananmu tẽẽ. Ɛsɛ sɛ wɔma panel span, supporting frame, fasteners ne adesoa a wɔhwɛ kwan no yɛ nokware.

PVC Foam Board ne PVC Krataa a wɔde di dwuma

• Dawurubɔ ne nsɛnkyerɛnne: Nsɛnkyerɛnne a wɔatintim, dawurubɔ nkrataa, menu boards, aguadidan mu nneɛma a wɔde kyerɛ, ɔyɛkyerɛ mfonini ne baabi a wɔtɔ nneɛma.

• Furniture ne cabinets: Kitchen cabinets, aguaree vanities, wardrobes, shelving ne furniture afã horow.

• Mfinimfini asiesie: Ɔfasuo, ɔdan atifi nneɛma, mpaepaemu, nneɛma a wɔde asiesie ne ɔyɛkyerɛ adan.

• CNC fabrication: Routed nkyerɛwde, templates, models, prototypes, mfiri afã horow ne ɔyɛkyerɛ afã horow.

• Ntintim ne nea wɔde si so: UV-print substrates, mfonini a wɔde si so, vinyl mfonini ne laminated displays.

• Mfiridwuma mu nneɛma a wɔde di dwuma: Nneɛma a wɔde bɔ ho ban, nneɛma a ɛko tia nsɛe, nsusuwso ne afã horow a wɔayɛ a ɛnyɛ adesoa.

Twitwa, CNC Routing ne Nneɛma a Wɔyɛ

Wobetumi de nnwinnade pii a wɔde yɛ nnua ne plastic-fabrication ayɛ PVC foam board a ɛyɛ den no ho adwuma.

Saw Twitwa

Wobetumi de saw a ɛyɛ kurukuruwa, panel saws ne jigsaws adi dwuma denam nhama a ɛfata a ɛwɔ sẽ a ɛyɛ fɛ so. Ɛsɛ sɛ wɔboa krataa no koraa na ama wosow ne anoano a ɛsɛe no so atew.

CNC Routing ne Engraving a Wɔde Yɛ Nneɛma

Ɛsɛ sɛ wɔyɛ nsakrae wɔ router ahoɔhare, feed rate, cutter geometry ne depth per pass mu ma ɛne board no density ne thickness hyia na ama anoano a ɛho tew aba na ɛtew ɔhyew a ɛboaboa ano no so.

Drilling ne Mfiri a Wɔde kyekyere nneɛma

Wobetumi de nkɔnsɔnkɔnsɔn, rivets anaa bolts atutu board no na wɔde abɔ mu. Ɛsɛ sɛ wɔgye pilot-hole kɛseɛ, edge distance, washer kɛseɛ ne adesoa a wɔhwɛ kwan no di dwuma.

Adhesive Bonding a Wɔde Yɛ Nneɛma

Wobetumi apaw PVC solvent cements a ɛne no hyia, contact adhesives anaa structural adhesives sɛnea joint design ne bonded nneɛma te.

Laser a Wɔde Twitwa Nneɛma

Mpɛn pii no, wɔmfa laser ntwitwa PVC a wɔtaa de di dwuma no nkyerɛ efisɛ PVC a wɔde hyew no betumi ama wusiw a chlorine wom a ɛsɛe a ebetumi apira adwumayɛfo ne nnwinnade afi mu aba.

Mpɛn pii no ɛsɛ sɛ wɔde mfiri twa, ɔkwan a wɔfa so twa anaa die twitwa di dwuma gye sɛ nnwinnade titiriw a wɔde yɛ PVC ne nhyehyɛe a ɛfata a wɔde yiyi nneɛma wɔ hɔ.

Nsuo a Ɛko Tia ne Nneɛma a Atwa Yɛn Ho Ahyia a Ɛyɛ Nwini

PVC foam board no ntumi nkɔ nsuo pii na wɔtaa de di dwuma wɔ aguaree, adididan, aguaree, dan ase ne mmeae afoforo a ɛhɔ yɛ nwini.

Board no ankasa nporɔw anaasɛ ɛnhoro te sɛ nnua a wɔde ayɛ a wɔamfa ayɛ ho adwuma, nanso nea wɔde ahyɛ mu awie no nyɛ nea nsu ntumi nkɔ mu ara kwa.

Ɛsɛ sɛ wɔyɛ nkwaa, skru ntokuru, nnua a ɛboa, ntama ne ɔfasuo ntam nkitahodi ma nsuo a wɔhwɛ kwan sɛ ɛbɛda adi.

Abɔnten a Wɔde Di Dwuma ne UV Resistance

Standard white PVC foam board yɛ nea wɔkamfo kyerɛ titiriw ma dan mu nsɛnkyerɛnne, tintim, dan mu nneɛma ne dan mu dwumadie gye sɛ wɔasi abɔnten grade pɔtee bi so dua.

Abɔnten so a ɛda adi no betumi ama kɔla asesa, chalking, warping anaasɛ mfiri adwumayɛ so atew a egyina wim tebea, krataa kɔla, ne kɛse, fastening ne installation orientation so.

Ɛsɛ sɛ abɔnten so nnwuma a ɛbɛkyɛ no kyerɛ UV-stabilized grade, bere a wɔhwɛ kwan sɛ ɛbɛda adi, asasesin a ɛwɔ, krataa no mu duru ne ɔkwan a wɔfa so kyekyere.

Ɛsɛ sɛ wosusuw ɔhyew ntrɛwmu ho denam kwan a ɛfata a wɔde besisi hɔ a wɔde bɛma na wɔakwati sɛ wɔbɛbara nnua akɛse a ɛboro so no so.

Ogya Adwumayɛ ne Ahobammɔ

Ɛnsɛ sɛ wɔka PVC foam board ho asɛm wɔ ɔkwan a ɛkɔ akyiri so sɛ ogya ntumi nkɔ mu.

Ɔhyew suban gyina formulation, density, thickness, sample orientation, conditioning ne sɔhwɛ kwan so.

Ɛsɛ sɛ wɔde nsɛm te sɛ nea wɔde dum ne ho, UL 94, Class A anaa ogya nkyekyɛmu foforo di dwuma bere a amanneɛbɔ a ɛfata ka aduru no grade ne ne kɛse pɔtee ho asɛm nkutoo.

PVC a ɛyɛ hyew, ɛhyew anaasɛ ɛyɛ adwuma a ɛyɛ hyew a wontumi nni so no betumi ama wusiw a ɛyɛ hu na asɛe. Ɛsɛ sɛ mmeae a wɔyɛ ntama no de mframa a ɛfata, mfutuma a wɔyi ne adwuma mu ahobammɔ ho akwan di dwuma.

PVC Foam Board vs. PVC Krataa a ɛyɛ den ne MDF

Nneɛma pa a wɔde di dwuma ma PVC Foam Board

• PVC resin ne raw-nneɛma a wɔde di adanse.

• Sheet thickness ne thickness tolerance.

• Density ne density a wotumi gyina ano.

• Krataa no tenten, ne tɛtrɛtɛ, ne diagonal ne ne square.

• Surface smoothness, gloss ne nwene.

• White point, kɔla nsonsonoe ne batch consistency.

• Flatness, kotow ne warpage.

• Nkwammoaa nhyehyɛe ne sɛnea ɛte wɔ anoano.

• Nsonsonoe tuntum, efĩ, amena ne ɔfasu a asɛe.

• Ntintim, adhesion ne lamination adwumayɛ.

• CNC routing, drilling ne twa adwumayɛ.

• Screw retention ne mfiri sɔhwɛ wɔ baabi a ɛho hia.

• Nsuo a wɔtwetwe, Vicat ne ogya sɔhwɛ wɔ baabi a wɔakyerɛ.

• Ahobammɔ film, labels, packing ne pallet nhwehwɛmu.

Amanneɛbɔ PVC Foam Board Nneɛma a Wɔpaw

• Ne kɛse fi bɛyɛ 1mm kosi 35mm.

• Nsuo a ɛyɛ den firi bɛyɛ 0.35 kɔsi 1.0g/cm³.

• Nkratafa a ne kɛse yɛ 915 × 1830mm, 1220 × 2440mm, 1560 × 3050mm ne 2050 × 3050mm.

• Customized krataa ne cut-piece nsusuwii.

• Kɔla fitaa, tuntum, kɔkɔɔ, kɔkɔɔ, bruu, ahabammono ne nea wɔayɛ no sɛnea wɔpɛ.

• Matte, satin, a ɛyɛ torotoro na ɛhyerɛn.

• Ntintim, nsɛnkyerɛnne, dan mu nneɛma ne CNC grades.

• Free-foam ne application-specific skinned options.

• Abɔnten so nnuru a wɔde UV ayɛ.

• Sini a ɛbɔ ho ban ne nkrataa a wɔakyerɛw so a wɔayɛ no sɛnea wɔpɛ.

• PE bag, kraft krataa, kartɔn ne export-pallet a wɔde kyekyere nneɛma.

Packaging ne Export Delivery

Nhwɛsoɔ a wɔde gu mu: Wobetumi de sini, kraft krataa anaa nnaka abɔ nhwɛsoɔ nketewa a wɔatwitwa ho ban.

Krataa ahobammɔ: Wobetumi de PE bags, ahobammɔ film, kraft krataa ne ntwea so ahobammɔ adi dwuma sɛnea asase ani ne akwantu ahwehwɛde ahorow te.

Pallet packing: Wobetumi de nkratafa asisi plywood so anaasɛ wɔde pallet a wɔde kɔ amannɔne a wɔde ahama ne nneɛma a ɛbɔ ho ban ahyɛ mu.

Ankorankoro nkyerɛwde: Wobetumi de nkrataa a wɔakyerɛw so, pallet nkyerɛwde, kartɔn agyiraehyɛde ne nneɛma a wɔde kyekyere nneɛma ho nsɛm a wɔayɛ ama.

Container loading: Adesoa dodow gyina ne kɛse, density, krataa nsusuwii, pallet nhyehyɛe ne mmara kwan so anohyeto ahorow a ɛfa emu duru ho.

Bere a wɔde di dwuma: Standard production taa gye bɛyɛ nnafua 15-20 wɔ specification, dodow, packaging ne deposit a wɔahyɛ no den akyi.

PVC Foam Board SGS Nwoma a Wɔde Di Dwuma

Twe SGS krataa a ɛwɔ hɔ no na woatumi ahwɛ. Si so dua sɛ amanneɛbɔ no ka density, thickness, color, formulation ne application a ɛka nhyehyɛe no ho pɛpɛɛpɛ.

   Twe PVC Foam Board SGS Nwoma no

Nsɛm a Ɛho Hia ma PVC Foam Board Quote

• Nea etwa to: nsɛnkyerɛnne, tintim, kabinet, dan mu nneɛma, mpaapaemu, ɔfasu panel anaa CNC fã.

• Wɔhwehwɛ sɛ wotumi gyina ne kɛse ne ne kɛse ano.

• Density ne density tolerance a wɔhwehwɛ.

• Krataa tenten, ne tɛtrɛtɛ ne twa a wotumi gyina ano.

• Kɔla fitaa, tuntum anaa nea wɔayɛ no sɛnea wɔpɛ.

• Matte, satin, ɛyɛ mmerɛw anaasɛ ɛyɛ glossy wie.

• Free-foam, skinned anaa nhyehyɛe foforo a wɔhwehwɛ.

• Printing, laminating, CNC routing anaa fastening nhyehyɛe.

• Nneɛma a wɔde si dan mu anaa abɔnten.

• UV, ogya, nnuru anaa mfiri sɔhwɛ ahwehwɛde.

• Sini a ɛbɔ ho ban ne ahwehwɛde ahorow a wɔde kyerɛw nsɛm.

• Order dodow ne afe afe dodow a wɔabu akontaa.

• Ɔkwan a wɔfa so boaboa nneɛma ano ne hyɛn gyinabea a wɔde kɔ.

• Da a wɔhwehwɛ sɛ wɔde bɛkɔ ne aguadi ho nhyehyɛe.

Send Wo PVC Foam Board Ahwehwɛde ahorow

Dɛn Nti na Wopaw HSQY sɛ Wo PVC Foam Board Supplier?

• PVC foam nkratafa a ɛyɛ den a efi bɛyɛ 1mm kosi 35mm.

• Density options fi bɛyɛ 0.35 kosi 1.0g/cm³.

• Standard ne akɛse-format krataa nsusuwii.

• Ntintim, nsɛnkyerɛnne, dan mu nneɛma ne CNC grades.

• White ne customized kɔla a wɔyɛ.

• Customized soro wie ne ahobammɔ film.

• Nhwɛsoɔ a wɔde yɛ tintim, twa, routing ne fastening sɔhwɛ.

• Nhwehwɛmu a wɔyɛ wɔ nneɛma pa ho a wɔde tia nsɛm a wɔapene so.

• Export packaging, labeling ne amanaman ntam-delivery mmoa.

Ansa na wɔbɛyɛ nneɛma pii no, HSQY kamfo kyerɛ sɛ wɔmfa adetɔfo no printa ankasa, CNC router, adhesive, fastener, cabinet hardware anaa installation system nsusuw nhwɛsode bi ho.

Di HSQY nkitaho na woanya Nhwɛsode ne Bo

HSQY Adansedi nkrataa ne Wiase Nyinaa Nneɛma a Wɔde Kyerɛkyerɛ

Ɛsɛ sɛ wɔhwɛ adansedi nkrataa ne sɔhwɛ amanneɛbɔ a ɛwɔ hɔ no hwɛ sɛnea PVC foam board grade, ne kɛse, ne density, kɔla ne gua a wɔpɛ sɛ wɔtɔn no pɛpɛɛpɛ.

Nsɛm a Wɔtaa Bisa Fa Rigid PVC Foam Board Ho

Dɛn ne PVC foam board a ɛyɛ den a ɛyɛ den kɛse?

Ɛyɛ PVC krataa a ɛyɛ den a wɔatrɛw mu a ɛwɔ nkwammoaa mu ntini. Higher-density grades ma nkɔanim rigidity, soro hardness ne machining pintinnyɛ ma furniture, cabinets, CNC afã horow, nsɛnkyerɛnne ne emu panels.

Density bɛn na wobu no sɛ ɛyɛ high-density PVC foam board?

Amansan nyinaa ahwehwɛde biako biara nni hɔ. Wɔ HSQY mu no, grades bɛn 0.35-1.0g/cm⊃3 no atifi fã; range ma density kɛse, nanso ɛsɛ sɛ wɔkyerɛw density pɔtee no wɔ order specification no mu.

Nsonsonoe bɛn na ɛda PVC foam board ne solid PVC krataa ntam?

PVC foam board wɔ cellular nhyehyɛe na ɛyɛ hare. PVC krataa a ɛyɛ den a ɛyɛ den no nyɛ nea ahuru, ɛyɛ den na wɔtaa paw bere a nnuru a ɛko tia a ɛkorɔn anaasɛ nhyehyɛe a ɛyɛ den ho hia.

Nsonsonoe bɛn na ɛwɔ free-foam ne Celuka PVC board ntam?

Mpɛn pii no, Free-foam board no wɔ nkwammoaa nhyehyɛe a ɛyɛ pɛ kɛse na wɔde di dwuma kɛse de tintim ne nsɛnkyerɛnne. Celuka board wɔ akyi were a ɛyɛ den na wɔtaa paw ma cabinets, furniture ne applications a ɛhwehwɛ sɛ ɛyɛ den kɛse wɔ soro.

Dɛn ne co-extruded PVC foam board?

Co-extruded board wɔ foamed core ntam harder PVC surface layers, ma ɛyɛ mmerɛw surface na ɛkɔ soro ko tia scratches ne mfiri asɛe.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

HSQY de PVC foam boards a ɛyɛ den ma fi bɛyɛ 1mm kosi 35mm. Nea etwa to a wobenya no gyina density, krataa kɛse, kɔla ne ɔkwan a wɔfa so yɛ no so.

Nkratafa akɛse bɛn na ɛwɔ hɔ?

Nneɛma akɛse a wɔahyɛ da ayɛ no bi ne 915 × 1830mm, 1220 × 2440mm, 1560 × 3050mm ne 2050 × 3050mm. Wobetumi asusuw nsusuwii a wɔatwa no sɛnea wɔpɛ nso ho.

So 18mm PVC foam board fata ma kabinet?

Wobetumi de 18mm medium- anaa high-density grade a ɛfata adi dwuma ama kabinet afã horow. Ɛsɛ sɛ wɔsɔ screw retention, hinges, span, loading ne supporting structure hwɛ.

So PVC foam board no ntumi nkɔ nsu mu?

Board no nni nsu a ɛtwetwe pii na ɛnhohoro te sɛ MDF a wɔansiesie no. Cabinet, ɔfasu anaa panel a wɔde ahyɛ mu awie no yɛ nea nsuo ntumi nkɔ mu bere a wɔayɛ joints, fasteners ne interfaces no yie nko ara.

So wobetumi de PVC foam board adi dwuma wɔ abɔnten?

Wobetumi de UV-stabilized grades a wɔapaw adi dwuma wɔ abɔnten. Ɛnsɛ sɛ wɔka standard indoor board ho asɛm ara kwa sɛ ɛfata ma abɔnten so a wɔde bɛda adi bere tenten.

So wobetumi atintim PVC foam board tẽẽ?

Aane. Grade ahorow a ɛfata betumi aboa flatbed UV ne screen printing. Ɛsɛ sɛ wodi kan sɔ ink a ɛbata ho, ɛsa, kɔla a ɛsan ba ne sɛnea ɛwɔ soro no hwɛ.

So wobetumi de PVC foam board akɔ CNC kwan so?

Aane. Wobetumi ayɛ CNC routed, engraved na milled. Ɛsɛ sɛ wɔde cutter geometry, spindle ahoɔhare, feed rate ne depth per pass no hyia ne board density ne thickness.

So wobetumi atutu PVC foam board na wɔde nkɔnsɔnkɔnsɔn abɔ mu?

Aane. Mpɛn pii no, grades a ɛkorɔn ma skru a ɛkora so no tu mpɔn. Ɛsɛ sɛ wɔsɔ pilot ntokuru, anoano kwan, washers ne adesoa a wɔhwɛ kwan hwɛ.

Adhesive bɛn na wobetumi de ayɛ PVC foam board?

Wobetumi de PVC semɛnte a ɛne ne ho hyia, contact adhesive anaa structural adhesive adi dwuma a egyina joint ne bonded nneɛma so. Ɛsɛ sɛ wɔsɔ adhesion hwɛ wɔ production sample so.

So wobetumi atwa PVC foam board no laser?

Mpɛn pii no, wɔmfa laser twa a wɔtaa yɛ no nkyerɛ efisɛ PVC a ɛyɛ hyew betumi ama wusiw a chlorine wom a ɛsɛe ade afi mu. Mfiri a wɔde twa anaa CNC routing na wɔtaa pɛ.

So PVC foam board no ntumi nhyew?

Ɛnsɛ sɛ wɔka PVC foam board biara ho asɛm sɛ ogya ntumi nkɔ mu. Ɛsɛ sɛ wɔde sɔhwɛ amanneɛbɔ a ɛfa grade, density ne thickness pɔtee ho na ɛboa ogya adwumayɛ.

So formaldehyde wɔ PVC foam board mu?

Wɔmfa nnua nhama a wɔde formaldehyde abɔ mu na ɛyɛ PVC foam board. Ɛsɛ sɛ wɔda so ara de nkrataa a ɛkyerɛ sɛnea wɔayɛ no pɛpɛɛpɛ no si nnuru pɔtee biara a wɔka sɛ ɛyɛ nnuru a wɔabara no so dua.

So wobetumi asan de PVC foam board adi dwuma bio?

PVC foam board betumi asan de adi dwuma wɔ mfiridwuma mu, nanso sɛnea wobetumi asan de adi dwuma ankasa no gyina mpɔtam hɔ nneɛma a wɔboaboa ano, wɔhyehyɛ, sɛnea wɔyɛ, sini a ɛwɔ soro, tintim, ade a wɔde nkata so ne efĩ so.

So wobetumi de PVC a wɔasan de adi dwuma adi dwuma wɔ foam board mu?

Ebia nneɛma a wɔasan de adi dwuma na ɛwɔ board structures a wɔapaw mu. Nneɛma a wɔasan de adi dwuma no betumi aka kɔla, density, surface quality, mfiri a ɛyɛ pɛpɛɛpɛ ne regulated applications.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

MOQ a wɔahyɛ da ayɛ ma saa ade yi bɛyɛ metric tɔn 3. Kɔla ahorow a wɔayɛ no sɛnea wɔpɛ, densities, akɛse anaa nsɛm a wɔadi afra betumi ahwehwɛ dodow ahorow.

So wobetumi anya nhwɛsode ahorow a wontua hwee?

Ebia stock samples a wontua hwee wɔ hɔ a wɔde bɛhwɛ ne kɛse, ne kɛse, ne soro, ne tintim ne ne mfiri. Mpɛn pii no, nea ɔtɔ no na otua nneɛma a wɔde mena.

Dɛn ne bere a wɔde yɛ adwuma no?

Standard production taa gye bɛyɛ nnafua 15-20 wɔ specification, dodow, packaging ne deposit akyi.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa dwumadie, ne kɛseɛ, ne density, krataa kɛseɛ, kɔla, wie, tintim anaa mfiri kwan, dodoɔ, packaging, destination port ne sɔhwɛ gyinapɛn a wɔhwehwɛ ma.

Nya Amanneɛbɔ PVC Foam Board Quote

Ɛfa HSQY Plastic Kuw ho

Changzhou Huisu Qinye Plastic Group Co., Ltd. de PVC foam boards a ɛyɛ den ne plastic nkrataa afoforo a wɔde kyerɛw nsɛnkyerɛnne, tintim, nkuku, dan mu nneɛma, dan mu nneɛma a wɔde siesie ne mfiridwuma mu nneɛma ma.

HSQY boa wɔn a wɔkyekyɛ, wɔn a wɔyɛ nsɛnkyerɛnne, wɔn a wɔyɛ dan mu nneɛma, wɔn a wɔde adansi-nneɛma ma ne wɔn a wɔyɛ plastic denam nhwɛsode nhwehwɛmu, nneɛma a wɔyɛ, nhwehwɛmu ne nneɛma a wɔde kɔ amannɔne a wɔayɛ no sɛnea wɔpɛ so.

Bisa Quote ne Nhwɛsode