Dɔwɔƒe Kɔkɔ Density Sesẽ PVC Foam Board kple PVC Agbalẽvi Dɔwɔƒe

High Density Rigid PVC Foam Board Dɔwɔƒe

HSQY wɔa PVC foam board sesẽwo na dzesiwo, dijitaal tata, xɔmenuwo, nuɖaƒe kple tsileƒe kabinetwo, ememe panels, mamawo, ɖeɖefia ɖeɖefiawo, CNC-mɔ̃ ƒe akpawo kple general plastic fabrication.

Titrime siwo li la tso abe 1mm va ɖo 35mm, kple density tiatia tso abe 0.35 va ɖo 1.0g/cm³. Agbalẽvi ƒe lolome siwo wozãna ɖaa dometɔ aɖewoe nye 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm kple 2050 × 3050mm.

Yevu nye amadede si wozãna ɖaa na agbalẽtata, dzesiwo, kabinetwo kple xɔmenuwo ƒe atsyɔ̃ɖoɖo. Woate ŋu awɔ amadede yibɔ, dzĩ, ɣi, blɔ, amadede dzẽ kple amadede bubu siwo wowɔ ɖe ɖoɖo nu hã le woƒe kpekpeme, woƒe titrime kple agbɔsɔsɔ suetɔ si wobia nu.

Nusiwo woɖe fia ƒe ŋkɔwo nye PVC foam board sesẽ si ƒe didime nye 18mm le amadede ɣi alo esiwo wowɔ ɖe ɖoɖo nu me, eye eƒe lolome nye 1220 × 2440mm. Nu bubuwo ƒe titrime, didime, kpekpeme kple anyigba ƒe nuwuwu li na nudɔdɔ gbogbo aɖewo.

Density ƒe hatsotso si li la dometɔ aɖewoe nye esiwo ƒe kpekpeme le bɔbɔe, esiwo ƒe kpekpeme le titina kple esiwo ƒe kpekpeme lolo. Ele be nuƒlelawo nagblɔ ʋeʋẽ si tututu hiã tsɔ wu be woaɖo ŋu ɖe numeɖeɖe gbadzaa 'high density PVC foam board.' ko ŋu.

Dzro nu bliboa me HSQY PVC foam board ƒe hatsotso na free-foam, high-density kple customized sheet tiatia.

Bia PVC Foam Board ƒe Asixɔxɔ    Bia Dɔwɔha ƒe Kpɔɖeŋuwo

PVC Foam Board ƒe Adzɔnuwo ƒe Video

Kpɔ video si le ete be nàsrɔ̃ nu geɖe tso HSQY rigid PVC foam boards, titrime siwo li, agbalẽ ƒe lolome, anyigba ƒe nyonyome, wɔwɔmɔnu kple wo zazã ƒe tiatia ŋu.

Nukae Nye High Density Rigid PVC Foam Board?

High-density rigid PVC foam board nye polyvinyl chloride gbadzɛ si keke ɖe enu si me lãmenugbagbeviwo ƒe nuto nyui aɖe le eye eƒe gota gome sesẽ.

Eƒe lãmenugbagbeviwo ƒe wɔwɔme ɖea kpekpeme dzi kpɔtɔna ne wotsɔe sɔ kple PVC sesẽ sesẽ esime wòléa sesẽ si ŋu viɖe le, anyigba ƒe sesẽ, tsi ƒe tsitretsitsi kple ewɔwɔ ƒe dɔwɔwɔ me ɖe asi.

Woyɔa nu la hã zi geɖe be kekeɖenudɔ PVC agbalẽ, PVC foam agbalẽ, foamed PVC board, sesẽ PVC foam panel, Forex board alo PVC dzesi board.

Zi geɖe la, dzesi siwo ƒe kpekpeme lolo wu naa sesẽme, anyigba ƒe sesẽme, tsitretsitsi ɖe nuƒoƒo ŋu, gavi ƒe léle ɖe te kple mɔ̃a ƒe liƒo geɖe wu ɖeɖefia ƒe dzesi siwo le bɔbɔe.

Womeɖo density ƒe nudidiwo ɖe ɖoɖo nu le adzɔnuwɔƒe ɖesiaɖe me o. Eyata ele be ɖoɖo aɖe nade dzesi kpekpeme tututu le g/cm³, tsɔ kpe ɖe titrime si hiã, mɔɖeɖe ɖe nu ŋu kple eŋudɔwɔwɔ ŋu.

PVC foam board menye xɔtuɖaŋu ƒe xɔtunu le eɖokui si o. Ele be woawɔ agbalẽdzraɖoƒewo, kabinetwo, mamawo kple agbatsɔlawo ƒe akpawo eye woado wo kpɔ le ʋuƒoa ƒe titrime, kpekpeme, kekeme, nusiwo wotsɔ blaa nu kple agba si wokpɔ mɔ na nu.

Rigid PVC Foam Board Nusiwo Wowɔ ƒe Nɔnɔmetatawo

Rigid PVC Foam Board ƒe Nɔnɔmewo

Ele be woaɖo kpe titrime mamlɛtɔ ƒe mɔɖeɖe, ʋeʋẽ ƒe mɔɖeɖe, didime, amadede, anyigba, ametakpɔnu film, gota dɔwɔwɔ kple mɔ̃ɖaŋununya ƒe nɔnɔmewo dzi le nuŋlɔɖi si dzi woda asi ɖo me.

Free-Foam, Celuka kple Co-Extruded PVC Foam Board

Mele be woabu nuwɔwɔ ƒe mɔnu etɔ̃awo be wonye nusiwo sɔ o. Ele be nuƒlelawo nagblɔ nenye be nu vevitɔe nye agbalẽtata ƒe nyonyome, kpekpeme sue, ŋutigbalẽ sesẽ, screw holding, lamination alo CNC edge quality.

Alesi Nàtia PVC Foam Board Density

Density kpɔa ŋusẽ ɖe agbalẽ ƒe kpekpeme, sesẽ, bending tsitretsitsi, anyigba ƒe sesẽ, screw léle, machining liƒo kple nusiwo wotsɔ wɔe ƒe asi.

Density ƒe didime siawo nye tiatiawɔblɔɖe ƒe mɔfiamewo tsɔ wu be woanye xexeame katã ƒe dɔwɔƒewo ƒe hatsotsowo. Dɔwɔwɔ mamlɛtɔ nɔ te ɖe atikewɔwɔ, ewɔwɔ ƒe mɔnu, eƒe titrime, ŋutigbalẽ ƒe wɔwɔme kple dodokpɔ dzi.

PVC Foam Board ƒe Titrime Mɔfiame

Titrime ɖeɖe mefiaa ŋusẽ o. Ele be woabu board density, unsupported span, edge design, fastening method, dzoxɔxɔ kple agba si wokpɔ mɔ na hã ŋu.

Viɖe Vevi Siwo Le Rigid PVC Foam Sheet Ŋu

Kpekpeme si le bɔbɔe kple Sesẽme si ŋu Viɖe le

Lãmenugbagbeviwo ƒe nuto si keke ɖe enu la ɖea ʋuƒoa ƒe kpekpeme dzi kpɔtɔna ne wotsɔe sɔ kple PVC-gbadzɛ sesẽ si sɔ, si kpena ɖe ame ŋu be woaɖe asi le eŋu kple ʋuɖoɖo ƒe nudidiwo dzi akpɔtɔ.

Tsi ƒe Xɔxlɔ̃ si Mebɔ O

PVC foam board la mexɔa tsi boo o eye mevuvuna alo gblẽna abe alesi atiwo ƒe akpa geɖe siwo ŋu womewɔ atike ɖo o ene o.

Anyigba si woate ŋu ata si le gbadzaa

White matte, satin kple anyigba gbadzawo ateŋu ado alɔ flatbed UV tata, screen tata, vinyl nɔnɔmetatawo, nutata kple lamination le dodokpɔ si sɔ kple wo nɔewo megbe.

Blewu CNC kple Mɔ̃ɖaŋununya Fabrication

Woate ŋu atsɔ dɔwɔnu siwo sɔ kple dɔwɔwɔ ƒe nɔnɔmewo abla ʋuƒoa, aku nu me, akplɔe, aŋlɔe, atue, atsoe le ku me eye woatsɔ mɔ̃ ablae.

Tsitretsitsi Kple Dzoxɔxɔ ƒe Tsitretsitsi

PVC foam sheet sɔ na xɔme nuto geɖe siwo me fafa le kple dɔwɔwɔ siwo wodo goe le dzadzɛnyenyetike siwo bɔ alo nɔnɔme siwo gblẽa nu le ame ŋu me.

Dekɔnu ƒe Density kple Amadede

Nuƒlelawo ate ŋu agblɔ kpekpeme, titrime, agbalẽa ƒe lolome, amadede, anyigba ƒe nuwuwu, ametakpɔ film, nubablɛ kple dzeside le ewɔwɔ ƒe ŋutete nu.

Dzɔdzɔmeŋusẽ ƒe Nɔnɔmewo le Rigid PVC Foam Board

Esiawo nye nufiame ƒe asixɔxɔ siwo tso adzɔnuwo ŋuti nyatakaka siwo li me. Nusiwo do tso eme ŋutɔŋutɔ ateŋu ato vovo le kpekpeme, titrime, atikewɔwɔ, dodokpɔ ƒe dzoxɔxɔ, kpɔɖeŋu ƒe mɔfiame kple dodokpɔ mɔnu nu.

Vicat ƒe fafa ƒe dzoxɔxɔ nye nudokpɔƒe ƒe nu ƒe dzesi eye mele be woaɖee gɔme be enye dzoxɔxɔ si wokafu be woatsɔ awɔ dɔe ɖaa le akpa si wowɔ ŋu o.

PVC Foam Board na Agbalẽtata kple Dzesiwo

Wozãa PVC foam board ɣi sesẽwo geɖe abe nusi woatsɔ awɔ dzesiwo, nuƒleƒe ƒe ɖeɖefiawo, nuɖuɖu ƒe kplɔ̃wo, ɖeɖefia ƒe nɔnɔmetatawo kple atsyɔ̃ɖoɖo ƒe akpa siwo wota ene.

Ele be agbalẽtata-grade board nana ɣi ƒe teƒe si dzi wokpɔna, titrime si mewɔa tɔtrɔ o, gbadzaƒe si li ke kple anyigba si sɔ na ink ɖoɖo si wotia.

PVC Foam Board na Kabinetwo kple Furniture

Woate ŋu azã PVC foam board siwo ƒe kpekpeme le titina kple esiwo ƒe kpekpeme lolo ŋutɔ na nuɖazewo, tsileƒe ƒe nu tsɛwo, awudzraɖoƒewo, agbalẽdzraɖoƒewo, ʋɔtruwo, agbalẽdzraɖoƒe ƒe akpawo kple atsyɔ̃ɖonuwo ƒe xɔmenuwo ƒe akpawo.

Ne wotsɔe sɔ kple MDF alo particleboard si womewɔ atike na o la, PVC foam board mexɔa tsi eye wòvuvuna le mɔ ɖeka nu o. Eyata wotiae enuenu na xɔme teƒe siwo fa miamiamia.

Ele be xɔmenuwo zazã nada screw pull-out ŋusẽ, hinge retention, bending, creep, anyigba ƒe sesẽme kple ɣeyiɣi didi ƒe agba.

Mele be woawɔ nu ɖe ​​PVC foam board si ƒe kpekpeme lolo ŋu le eɖokui si be enye xɔtunu si woatsɔ aɖɔli plywood tẽe o. Ele be woaɖo kpe panel span, supporting frame, fasteners kple agba si wokpɔ mɔ na dzi.

PVC Foam Board kple PVC Sheet ƒe dɔwɔwɔ

• Boblododo kple dzesiwo: Dzesi siwo wota, boblodoʋuƒowo, nuɖuɖu ƒe ɖaseɖigbalẽviwo, asitsaƒewo ƒe ɖeɖefiawo, ɖeɖefiawo ƒe nɔnɔmetatawo kple teƒe si woƒlee ƒe nɔnɔmetatawo.

• Furniture kple cabinets: Dzodoƒe kabinetwo, tsileƒe ƒe nuzazãwo, awudzraɖoƒewo, agbalẽdzraɖoƒewo kple xɔmenuwo ƒe akpa aɖewo.

• Atsyɔ̃ɖoɖo na xɔa me: Gliwo, dzisasrã ƒe akpawo, mamawo, atsyɔ̃ɖonuwo kple ɖeɖefiaxɔwo.

• CNC fabrication: Routed ŋɔŋlɔdzesiwo, templates, kpɔɖeŋuwo, kpɔɖeŋuwo, mɔ̃ ƒe akpawo kple ɖeɖefia ƒe akpawo.

• Agbalẽtata kple eɖoɖo: UV-tata substrates, fotowo dada, vinyl nɔnɔmetatawo kple laminated ɖeɖefiawo.

• Dɔwɔƒewo ƒe zazã: Ametakpɔnu, akpa siwo te ŋu nɔa te ɖe xɔxlɔ̃ nu, nɔnɔmetatawo kple akpa siwo wowɔ siwo metsɔa agba o.

Lãɖeɖe, CNC Mɔfiame kple Fabrication

Woate ŋu azã atikpakpa kple aŋetudɔwɔnu geɖe atsɔ awɔ PVC-futukpɔ si sesẽ la ŋudɔ.

Saw Lãɖeɖe

Woate ŋu azã aŋe siwo le gota, aŋe siwo wotsɔa aŋe wɔe kple jigsaws kple aɖu nyui siwo sɔ. Ele be woalé agbalẽa ɖe te bliboe be wòaɖe ʋuʋudedi kple eƒe nugbɔ ƒe gbegblẽ dzi akpɔtɔ.

CNC Mɔfiame kple Nuŋɔŋlɔ

Ele be woatrɔ asi le router ƒe duƒuƒu, nuɖuɖu ƒe tsɔtsɔme, cutter geometry kple goglome le pass ɖesiaɖe me ɖe board la ƒe kpekpeme kple titrime nu be woawɔ go siwo le dzadzɛ eye woaɖe dzoxɔxɔ ƒe ƒoƒo ɖe edzi dzi akpɔtɔ.

Kukuƒe Kple Mɔ̃ɖaŋununya ƒe Fastening

Woate ŋu aku ʋuƒoa eye woatsɔ gavi, rivet alo bolt ablae. Ele be woaɖo kpe yameʋukulawo ƒe do ƒe lolome, nugbɔ ƒe didime, washer ƒe lolome kple agba si wokpɔ mɔ na dzi.

Adhesive ƒe Kadodo

Woate ŋu atia PVC solvent cements siwo sɔ, contact adhesives alo structure adhesives le ƒunukpeƒe ƒe nɔnɔme kple nusiwo wobla nu.

Laser ƒe Lãɖeɖe

Zi geɖe la, womeɖoa aɖaŋu be woatso PVC kple laser si wozãna ɖaa o elabena dzoxɔxɔ na PVC ate ŋu ana dzudzɔ si me chlorine le si gblẽa nu le ame ŋu si ate ŋu agblẽ nu le dɔwɔlawo kple dɔwɔnuwo ŋu la dona.

Zi geɖe la, ele be woazã mɔ̃wo ƒe lãɖeɖe, mɔfiame alo ku lãɖeɖe negbe ɖe PVC-dɔwɔwɔ ƒe dɔwɔnu tɔxɛwo kple eɖeɖe ƒe ɖoɖo siwo sɔ li hafi.

Tsi ƒe Tsitretsitsi Kple Nɔnɔme Siwo Me Tsi Le

PVC foam board la mexɔa tsi boo o eye wozãnɛ zi geɖe le tsileƒewo, nuɖaƒewo, tsileƒewo, anyigbaxɔdzowo kple xɔmenuwo ƒe nɔnɔme bubu siwo me fafa le.

Board la ŋutɔ megblẽna alo vuvuna abe ati siwo ŋu womewɔ atike ɖo o ene o, gake tsi mate ŋu age ɖe eme le eɖokui si o.

Ele be woatrɔ asi le ƒunukpeƒewo, gavi ƒe dowo, xɔtunu siwo wotsɔ léa nu ɖe ​​te, nulénu kple gli ƒe ƒomedodowo ŋu na tsidzadza si wokpɔ mɔ na.

Gbedoxɔ Zazã Kple UV Tsitretsitsi

Wokafu PVC foam board ɣi si wozãna ɖaa koŋ na xɔme dzesiwo, agbalẽtata, xɔmenuwo kple xɔmenuwo zazã negbe ɖe woɖo kpe gotagome dzesi aɖe koŋ dzi hafi.

Gbedoxɔ me nɔnɔ ate ŋu ana amadede natrɔ, chalking, warping alo mɔ̃ɖaŋununya ƒe dɔwɔwɔ dzi naɖe akpɔtɔ le yame ƒe nɔnɔme, agbalẽ ƒe amadede, titrime, babla kple eɖoɖo ƒe ɖoɖo nu.

Ele be gotagomedɔwo wɔwɔ ɣeyiɣi didi nagblɔ UV-stabilized grade, ɣeyiɣi si wokpɔ mɔ be woaɖee, anyigba ƒe teƒe si wole, agbalẽa ƒe titrime kple alesi woatsɔe ablae.

Ele be woabu dzoxɔxɔ ƒe kekeɖenudɔ ŋu to mɔ si sɔ nana be woaɖoe kple asaƒoƒo na xɔtunu gãwo ƒe mɔxexe fũ akpa.

Dzo ƒe Dɔwɔwɔ Kple Dedienɔnɔ

Mele be woaɖɔ PVC foam board zi geɖe be dzo mate ŋu age ɖe eme o.

Dzobibi ƒe nuwɔna nɔ te ɖe atikewɔwɔ, kpekpeme, titrime, kpɔɖeŋu ƒe ɖoɖo, nɔnɔme kple dodokpɔ mɔnu dzi.

Ne nyatakaka si sɔ ƒo nu tso nusi wowɔ ƒe hatsotso kple eƒe titrime tututu ŋu ko hafi woazã nya siwo wogblɔna abe ɖokuitɔdidi, UL 94, Klass A alo dzo ƒe hatsotso bubu ene.

PVC ƒe dzoxɔxɔ, dzobibi alo dzoxɔxɔ ƒe dɔwɔwɔ si dzi womeɖu o ate ŋu ado dzudzɔ si me afɔku le eye wògblẽa nu le ame ŋu. Ele be woazã yaƒoƒo, ke ɖeɖe kple dɔwɔƒe-dedienɔnɔ ƒe mɔnu siwo sɔ.

PVC Foam Board vs. Sesẽ PVC agbalẽ kple MDF

Dzɔdzɔmeŋusẽdzikpɔkpɔ na PVC Foam Board

• PVC resin kple raw-nu veviwo ƒe kpeɖodzi.

• Sheet ƒe titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Density kple density ƒe mɔɖeɖe ɖe nu ŋu.

• Agbalẽvi ƒe didime, kekeme, eƒe axadzi kple eƒe dzogoe ene me.

• Anyigba ƒe blɔ, keklẽ kple nɔnɔme.

• White point, amadede ƒe vovototo kple batch ƒe ɖekawɔwɔ.

• Flatness, tadedeagu kple warpage.

• Lãmenugbagbeviwo ƒe wɔwɔme kple eƒe nugbɔ ƒe dzedzeme.

• Teƒe yibɔwo, ɖiƒoƒowo, dowo kple nusiwo gblẽ le anyigba ŋu.

• Agbalẽtata, adhesion kple lamination dɔwɔwɔ.

• CNC mɔfiame, drilling kple lãɖeɖe ƒe dɔwɔwɔ.

• Screw léle ɖe te kple mɔ̃ɖaŋu dodokpɔ le afisi wòhiã le.

• Tsi ƒe xɔxlɔ̃, Vicat kple dzo dodokpɔ le afisi wogblɔe le.

• Ametakpɔnu film, ŋkɔwo, packing kple pallet me dzodzro.

PVC Foam Board ƒe Tiatiawɔblɔɖe siwo wowɔ ɖe ɖoɖo nu

• Eƒe titrime tso abe 1mm va ɖo 35mm ene.

• Eƒe kpekpeme tso abe 0.35 va ɖo 1.0g/cm³.

• 915 × 1830mm, 1220 × 2440mm, 1560 × 3050mm kple 2050 × 3050mm ƒe agbalẽwo.

• Wotrɔ asi le agbalẽ kple lãɖeɖe-nu ƒe didimewo ŋu.

• Amadede ɣi, yevu, dzĩ, ɣi, blɔ, amadede dzẽ kple esiwo wowɔ ɖe ɖoɖo nu.

• Matte, satin, anyigba siwo le gbadzaa eye wole keklẽm.

• Agbalẽtata, dzesiwo, xɔmenuwo kple CNC ƒe dzesiwo.

• Free-foam kple application-koŋ skinned tiatia.

• Gotagome atike siwo wotsɔ UV-si li ke.

• Film si kpɔa ame ta kple agbalẽ siwo dzi woŋlɔ nu ɖo siwo wowɔ ɖe ɖoɖo nu.

• PE kotoku, kraft pepa, kakɛ kple export-pallet bablawo.

Nubablɛwo Kple Nusiwo Woɖo Ðe Duta

Kpɔɖeŋuwo ƒe babla: Woate ŋu atsɔ film, kraft paper alo kakɛwo akpɔ kpɔɖeŋu sue siwo wotso ta.

Sheet takpɔkpɔ: Woate ŋu azã PE kotokuwo, ametakpɔnu film, kraft pepa kple dzogoe takpɔkpɔ le anyigba dzi kple ʋuɖoɖo ƒe nudidiwo nu.

Pallet packing: Woate ŋu atsɔ agbalẽwo aƒo ƒu ɖe plywood dzi alo woatsɔ pallet siwo wotsɔ ɖoa ​​duta siwo ŋu ka kple ametakpɔnu le.

Ame ŋutɔ ƒe dzeside: Woate ŋu ana agbalẽvi siwo dzi woŋlɔ nu ɖo, pallet ƒe dzesidewo, kakɛ ƒe dzesiwo kple nusiwo wobla ɖe agba me ƒe xexlẽdzesiwo.

Agbatsɔtsɔ: Agbatsɔtsɔ ƒe agbɔsɔsɔme nɔ te ɖe eƒe titrime, eƒe kpekpeme, agbalẽa ƒe didime, pallet ƒe nɔnɔme kple mɔxexe ɖe kpekpeme nu le se nu dzi.

Ɣeyiɣi si woatsɔ awɔe: Zi geɖe la, ewɔwɔ si sɔ xɔa abe ŋkeke 15-20 ene le esi woɖo kpe eƒe nɔnɔme, agbɔsɔsɔme, babla kple nusi wotsɔ de eme dzi vɔ megbe.

PVC Foam Board SGS Nuŋlɔɖi

Wɔ SGS ƒe agbalẽ si li la ƒe kɔpi be nàkpɔe. Ðo kpe edzi be nyatakakaa ƒo nu tso kpekpeme, titrime, amadede, atike si wowɔ kple eŋudɔwɔwɔ si tututu le ɖoɖoa me ŋu.

   Wɔ PVC Foam Board SGS Nuŋlɔɖi ƒe kɔpi

Nyatakaka Siwo Hiã Na PVC Foam Board Quote

• Dɔwɔwɔ mamlɛtɔ: dzesiwo, agbalẽtata, kabinet, xɔmenuwo, mama, gli ƒe akpa alo CNC ƒe akpa aɖe.

• Wobia be woate ŋu alɔ̃ ɖe eƒe titrime kple eƒe titrime dzi.

• Density kple density tolerance si hiã.

• Sheet ƒe didime, kekeme kple lãɖeɖe ƒe mɔɖeɖe ɖe nu ŋu.

• Amadede ɣi, yibɔ alo esi wowɔ ɖe ɖoɖo nu.

• Matte, satin, glidzaglidza alo glossy nuwuwu.

• Free-foam, skinned alo xɔtuɖoɖo bubu si hiã.

• Agbalẽtata, laminating, CNC mɔfiame alo fastening ɖoɖo.

• Xɔme alo gota ƒe ɖoɖowɔwɔ.

• UV, dzo, atike alo mɔ̃ dodokpɔ ƒe nudidiwo.

• Film si kpɔa ame ta kple dzesidede nu ƒe nudidiwo.

• Nudɔdɔ ƒe agbɔsɔsɔ kple ƒe sia ƒe ƒe agbɔsɔsɔme si wobu.

• Packing mɔnu kple destination port.

• Ɣletiŋkeke si wobia be woatsɔe vɛ kple asitsatsa ƒe ɖoɖowo.

Ðo Wò PVC Foam Board Nudidiwo ɖa

Nukatae Nàtia HSQY be wòanye Wò PVC Foam Board Dɔwɔƒe?

• PVC foam gbadzɛ sesẽwo tso abe 1mm va ɖo 35mm ene.

• Density tiatia tso abe 0.35 va ɖo 1.0g/cm³.

• Agbalẽvi ƒe didime siwo sɔ kple esiwo ƒe nɔnɔme lolo.

• Agbalẽtata, dzesiwo, xɔmenuwo kple CNC ƒe dzesiwo.

• Amadede ɣiwo kple esiwo wowɔ ɖe ɖoɖo nu wɔwɔ.

• Trɔ asi le anyigba ƒe nuwuwu kple ametakpɔ film.

• Kpɔɖeŋuwo na agbalẽtata, lãɖeɖe, mɔfiame kple babla dodokpɔwo.

• Dzɔdzɔmeŋutete me dzodzro le nɔnɔme tɔxɛ siwo dzi woda asi ɖo nu.

• Export packaging, labeling kple dukɔwo dome-dɔdɔ ƒe kpekpeɖeŋu.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY ɖo aɖaŋu be woada kpɔɖeŋu aɖe kpɔ to asisi la ƒe agbalẽtamɔ̃ ŋutɔŋutɔ, CNC router, adhesive, fastener, cabinet hardware alo installation system zazã me.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

HSQY ƒe Ðaseɖigbalẽwo kple Xexeame Katã ƒe Nukpɔkpɔwo

Ele be woalé ŋku ɖe ɖaseɖigbalẽ siwo li kple dodokpɔ ŋuti nyatakakawo ŋu ne wotsɔe sɔ kple PVC foam board ƒe grade, eƒe titrime, eƒe kpekpeme, amadede kple asi si woɖo be woawɔ.

Nya Siwo Wobiaa Enuenu Tso Rigid PVC Foam Board Ŋu

Nukae nye PVC foam board sesẽ si ƒe kpekpeme lolo?

Enye PVC-gbadzɛ sesẽ si keke ɖe enu si me lãmenugbagbeviwo ƒe nuto le. Kɔkɔ-density grades naa dzidziɖedzi sesẽ, anyigba ƒe sesẽ kple machining liƒo na xɔmenuwo, kabinetwo, CNC akpawo, dzesiwo kple ememe panels.

Density kae wobuna be enye high-density PVC foam board?

Xexeame katã ƒe dzidzenu ɖeka aɖeke meli o. Le HSQY ƒe domedome la, dzesi siwo te ɖe 0.35-1.0g/cm⊃3 ƒe akpa si le etame ŋu; range naa density si lolo wu, gake ele be woaŋlɔ density tututu ɖe order specification la me.

Vovototo kae le PVC foam board kple solid PVC sheet dome?

Lãmenugbagbeviwo ƒe wɔwɔme le PVC foam board ŋu eye wòle bɔbɔe wu. PVC gbadzɛ sesẽ si me futukpɔ mele o, elolo wu eye zi geɖe la, wotiae ne atikewo ƒe tsitretsitsi si lolo wu alo xɔtunu sesẽ aɖe hiã.

Vovototo kae le free-foam kple Celuka PVC board dome?

Zi geɖe la, lãmenugbagbeviwo ƒe wɔwɔme ɖeka tɔgbe nɔa free-foam board ŋu eye wozãnɛ geɖe hena agbalẽtata kple dzesiwo. Celuka board ƒe gota gome ƒe ŋutigbalẽ le ʋeʋẽm wu eye zi geɖe la, wotiae na kabinetwo, xɔmenuwo kple dɔwɔwɔ siwo hiã be anyigba ƒe sesẽme lolo wu.

Nukae nye co-extruded PVC foam board?

Co-extruded board ƒe futukpɔ ƒe nuto le PVC ƒe anyigba ƒe ƒuƒoƒo sesẽwo dome, si naa anyigba si le gbadzaa eye wòtsia tre ɖe ʋuʋudedi kple mɔ̃wo ƒe nugbegblẽ ŋu geɖe wu.

Titrime kawoe li?

HSQY naa PVC foam board sesẽwo tso abe 1mm va ɖo 35mm ene. Mlɔeba ƒe anyinɔnɔ nɔ te ɖe kpekpeme, agbalẽ ƒe lolome, amadede kple ewɔwɔ ƒe mɔnu dzi.

Agbalẽvi ƒe lolome kawoe li?

Agbɔsɔsɔme siwo wozãna ɖaa dometɔ aɖewoe nye 915 × 1830mm, 1220 × 2440mm, 1560 × 3050mm kple 2050 × 3050mm. Woate ŋu ada lãɖeɖe ƒe didime siwo wowɔ ɖe ɖoɖo nu hã kpɔ.

Ðe 18mm PVC foam board sɔ na kabinetwoa?

Woate ŋu azã 18mm medium- alo high-density grade si sɔ na kabinet ƒe akpawo. Ele be woado screw retention, hinges, span, agbatsɔtsɔ kple kpeɖeŋutɔ ƒe xɔtuɖoɖo kpɔ.

Ðe PVC foam board la mate ŋu age ɖe eme oa?

Tsi mexɔna le ʋuƒoa ŋu boo o eye mevuvuna abe MDF si womewɔ atike na o ene o. Kabinet, gli alo panel ɖoɖo si wowu enu la tsi mate ŋu age ɖe eme ne wowɔ ƒunukpeƒewo, nusiwo wotsɔ blaa nu kple nusiwo wotsɔ blaa woe nyuie ko.

Ðe woate ŋu azã PVC foam board le gotaa?

Woate ŋu azã UV-stabilized grade tiatia aɖewo le gota. Mele be woagblɔ le wo ɖokui si be xɔmeɖaka si wozãna ɖaa la sɔ na gota gome ɣeyiɣi didi o.

Ðe woate ŋu ata PVC foam board tẽa?

Ɛ̃. Dzeside siwo sɔ ate ŋu ado alɔ flatbed UV kple screen printing. Ele be woado ink ƒe ƒoƒo, eƒe dɔyɔyɔ, amadede ƒe dzidziɖedzi kple eƒe anyigba ƒe sɔsɔme kpɔ gbã.

Ðe woate ŋu atsɔ PVC foam board awɔ CNC routed?

Ɛ̃. Woate ŋu anye CNC routed, engraved kple milled. Ele be woatsɔ cutter geometry, spindle speed, feed rate kple depth le pass ɖesiaɖe me asɔ kple board density kple thickness.

Ðe woate ŋu aku PVC foam board ahatsɔ gavi aƒoea?

Ɛ̃. Zi geɖe la, dzesi siwo ƒe kpekpeme lolo wu naa gaviawo léna ɖe te nyuie wu. Ele be woado yameʋukulawo ƒe dowo, nugbɔ ƒe didime, washers kple agba siwo wokpɔ mɔ na la akpɔ.

Nukae woate ŋu azã na PVC foam board?

Woate ŋu azã PVC siminti si sɔ, contact adhesive alo structural adhesive le ƒunukpeƒea kple nusi wotsɔ blae nu. Ele be woado adhesion kpɔ le nusi wowɔ ƒe kpɔɖeŋu dzi.

Ðe woate ŋu atsɔ laser atso PVC foam boarda?

Zi geɖe la, womeɖoa aɖaŋu be woatso laser si wozãna ɖaa o elabena PVC si wodo dzoe ate ŋu aɖe dzudzɔ si me chlorine le si gblẽa nu le ame ŋu la ɖa. Mɔ̃ɖaŋu lãɖeɖe alo CNC mɔɖeɖee nyo wu zi geɖe.

Ðe PVC foam board la mate ŋu axɔ dzo oa?

Mele be woaɖɔ PVC foam board aɖeke si wozãna le xexeame katã be dzo mate ŋu age ɖe eme o. Ele be woatsɔ dodokpɔ ŋuti nyatakaka si aƒo nu tso dzoxɔxɔ ƒe dzesi, eƒe kpekpeme kple eƒe titrime tututu ŋu aɖo kpe dzo ƒe dɔwɔwɔ dzi.

Ðe formaldehyde le PVC foam board mea?

Wometsɔa ati ka siwo wotsɔ formaldehyde blae wɔa PVC foam board o. Ele be woazã nuŋlɔɖi siwo ku ɖe atike si tututu wowɔ ŋu atsɔ aɖo kpe atike si ŋu woxe mɔ ɖo ƒe nya aɖe koŋ dzi kokoko.

Ðe woate ŋu agbugbɔ PVC foam board awɔ dɔa?

Woate ŋu agbugbɔ PVC foam board awɔ dɔ le mɔ̃ɖaŋununya nu, gake alesi woate ŋu agbugbɔ awɔe ŋutɔŋutɔ nɔ te ɖe nutoa me nuƒoƒoƒu, eɖoɖo, ewɔwɔ, anyigbadzi film, agbalẽtata, aŋenu kple ɖiƒoƒo dzi.

Ðe woate ŋu azã PVC si wogbugbɔ zã le foam board mea?

Nusiwo wogbugbɔ zã ate ŋu anɔ ʋuƒo tiatia aɖewo me. Nusiwo wogbugbɔ zã ate ŋu akpɔ ŋusẽ ɖe amadede, kpekpeme, anyigba ƒe nyonyome, mɔ̃wo ƒe wɔwɔme kple dɔwɔwɔ siwo ŋu wowɔ ɖoɖo ɖo dzi.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si woɖo ɖi na atike sia anɔ abe metrik tɔn 3 ene. Amadede siwo wowɔ ɖe ɖoɖo nu, woƒe kpekpeme, lolome gãwo alo nɔnɔme siwo wotsaka ate ŋu abia agbɔsɔsɔ vovovowo.

Ðe woate ŋu akpɔ kpɔɖeŋuwo femaxeea?

Woate ŋu akpɔ stock samples femaxee hena ŋkuléle ɖe eƒe titrime, eƒe kpekpeme, eƒe anyigba, agbalẽtata kple mɔ̃wɔwɔ ŋu. Zi geɖe la, nuƒlelae xea agbatsɔtsɔ si woɖona ɖe amewo.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si wozãna ɖaa xɔa abe ŋkeke 15-20 ene le esi woɖo kpe eƒe nɔnɔme, agbɔsɔsɔme, babla kple nusi wotsɔ de eme dzi vɔ megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na dɔwɔwɔ, titrime, kpekpeme, agbalẽ ƒe lolome, amadede, nuwuwu, agbalẽtata alo mɔ̃ ƒe mɔnu, agbɔsɔsɔme, babla, yiyi melidzeƒe kple dodokpɔ dzidzenu siwo hiã.

Na PVC Foam Board Quote si wowɔ ɖe ɖoɖo nu

Ku ɖe HSQY Plastic Group ŋu

Changzhou Huisu Qinye Plastic Group Co., Ltd. naa PVC foam boards sesẽwo kple plastic gbadzɛ bubuwo na dzesiwo, agbalẽtata, kabinetwo, xɔmenuwo, xɔmenuwo ƒe atsyɔ̃ɖoɖo kple dɔwɔƒewo ƒe wɔwɔme.

HSQY doa alɔ mamalawo, dzesiwɔlawo, xɔmenuwo wɔlawo, xɔtunuwo dzralawo kple plastic fabricators kple kpɔɖeŋu ƒe dodokpɔ, wɔwɔ ɖe ɖoɖo nu, ŋkuléle ɖe nu ŋu kple nusiwo wotsɔ ɖoa ​​duta ƒe bablawo.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu