Anti-UV Klia Sɔlid Polikabɔnɛt Shit 0.8-15mm

Anti-UV Klia Sɔlid Polikabɔnɛt Shit 0.8-15mm

HSQY anti-UV klia sɔlid polycarbonate sheet matirial kɔmbayn ay impak rɛsistɛns, transparency ɛn ɔda wɛdabiliti fɔ ruf, glaz, skaylayt ɛn kanopi, wit 0.8-15mm tiknes ɛn kɔstɔm saiz.

Dɛn mek am wit polycarbonate, dis flat solid sheet matirial dɛn mek am fɔ aplikeshɔn dɛn we nid transparent, laytwɛt ɛn impak-rɛsistant ɔltɛrnativ to kɔvɛnshɔnal glazing matirial dɛn. Di kɔrɛnt prodak-lɛvɛl spɛsifikɛshɔn de list 0.8-15mm tiknɛs, standad ɛn kɔstɔm sheet matirial saiz, ɛn klia, tint-klia ɛn opak kɔlɔ opshɔn dɛn.

Di infɔmeshɔn bɔt di prɔdak we de naw de sho bak se dis prɔdak na anti-UV gred ɛn i de tɔk bɔt aw i go de fɔ 10 ia na do. Fɔ prɔjek dɛn we nid fɔmal UV warranty, yellowing limit ɔ layt-transmishɔn ritɛnshɔn garanti, kɔnfɔm di aplikebul warranty dɔkyumɛnt ɛn UV-protɛkshɔn kɔnfigyushɔn fɔ di ɛksaktɔl sheet matirial we dɛn gi.

Anti-UV Polycarbonate shit Spɛsifikeshɔn dɛn

Spesifikɛshɔn Notis: Di kɔrɛnt layv prodak paramita dɛn list 0.8-15mm tiknɛs. Di tin dɛn we bin de insay di bɔdi we bin de bifo dis pej bin gɛt 0.05-0.25mm fim spɛsifikɛshɔn dɛn we gɛt fɔ du wit printin ɛn kad aplikeshɔn dɛn; dεn tin-film valyu dεm de nכ de yuz as di men spεsifikεshכn fכ dis sכlid- sheet matirial prodakt.

Wetin Na Anti-UV Sɔlid Polikabɔnɛt Shit ?

Anti-UV solid polycarbonate sheet matirial na flat enjinering-plastik panɛl we dɛn mek fɔ kɔba di transparency ɛn fabrication flexibility fɔ polycarbonate wit improved resistance to outdoor ultraviolet exposure.

If yu nɔ gɛt fayn UV stebilizayshɔn ɔ UV layt we de protɛkt yu, we di san de shayn fɔ lɔng tɛm kin mek yu yɔlɔ ɛn lɔs di optik pefɔmɛns insay polycarbonate. Fɔ ɛkstirian aplikeshɔn, di UV-protɛkshɔn sistem na so wan impɔtant bay bay paramita pas wan opshɔnal dɛkɔretiv ficha.

Anti-UV protεkshכn kin bi tru difrεn fכmyuleshכn כ surface-layer kכnstrכkshכn. Di wan dɛn we de bay fɔ kɔnfɔm if di HSQY prodak we dɛn dɔn pik de yuz wan-sayd protɛkshɔn, tu-sayd protɛkshɔn ɔ ɔda UV-stabiliz kɔnstrɔkshɔn we di aplikeshɔn nid fɔ gɛt difayn ɔda savis layf.

Wetin Mek UV Protɛkshɔn Impɔtant fɔ Ɔda Polikabɔnɛt

10-Ia UV Protɛkshɔn: Wetin Baya dɛn fɔ Kɔnfɛm

Di HSQY prodak nem we de naw ɛn di ditayl kɔntinyu rɛfrɛns UV protɛkshɔn ɔ durabiliti fɔ 10 ia. Fɔ B2B bay bay, dis fɔ translet to klia tɛknikal ɛn kɔmɛshɔnal spɛsifikɛshɔn bifo yu ɔda.

Anti-UV Polikarbonɛt vs. Standart Polikabɔnɛt

Klia Sɔlid Polikabɔnɛt as Glas Riplesmɛnt

Dɛn kin evalyu klia sɔlid polikabɔnɛt bɔku tɛm as ɔda we fɔ mek glas usay ay impak rɛsistɛns, lɔwa wet ɛn izi fɔ mek impɔtant.

0.8-15mm Polikarbonɛt Tiknɛs Rɛnj

Di kɔrɛnt HSQY prodak-lɛvɛl spɛsifikɛshɔn de list tiknɛs frɔm 0.8mm to 15mm. Tiknɛs sɛlɛkshɔn fɔ bi bay di aplikeshɔn, panɛl saiz, sɔpɔt spɛshal, impak we dɛn nid ɛn di we aw dɛn mek am.

Di aplikeshɔn dairekshɔn dɛn we de ɔp nɔto strɔkchɔral span raytin. Ruf ɛn glaz projɛkt fɔ yuz di aktual sheet matirial prɔpati, panɛl dimɛnshɔn, briz lod, sno lod ɛn sɔpɔt sistɛm fɔ no di tik we dɛn nid.

1220×2400mm & 1200×2150mm Polycarbonate shit s

Di kɔrɛnt layv prodak paramita dɛn de list 1220×2400mm ɛn 1200×2150mm sheet matirial saiz dɛn togɛda wit kɔstɔm-sayz kapabiliti.

Fɔ kɔt-to-sayz ɔ fabricated ɔda, spɛsifa di finish dimɛnshɔn, tiknes, kwantiti ɛn dimɛnshɔnal tolɛreshɔn. Fɔ ruf ɔ glazing projɛkt, gi di sɔpɔtin-frɛm dimɛnshɔn dɛn bak so dat dɛn go ebul fɔ evalyu di panɛl saiz ɛn tiknɛs togɛda.

Klia, Tinted & Opak Polikabɔnɛt Opshɔn dɛn

Di kɔrɛnt prodak paramita dɛn de aydentify klia, klia-wit-kɔlɔ ɛn opaque kalaful sheet matirial opshɔn dɛn. Di tin dɛn we de insay di pej we de bifo de sho bak di kɔlɔ dɛn we wayt, milk wayt, transparent ɛn we yu kin kɔstɔmayz.

Di Opshɔn dɛn fɔ di Surface

Di fɔs prodak ditel list smol, frɔst, glos ɛn mat sɔfays opshɔn dɛn. Dɛn kayn sɔfayz ya kin yusful fɔ aplikeshɔn dɛn we nid difrɛn lɛvɛl dɛn fɔ transparency, glare kɔntrol, apinɛns ɔ difyushɔn.

Surface finish difrɛn frɔm UV protɛkshɔn. Mat ɔ frɔst sɔfays nɔ de bay insɛf sɛf de establish ɔda UV pefɔmɛns, ɛn anti-UV sheet matirial nɔ de ɔtomɛtik wan gɛt had kɔtin we nɔ de abrashɔn.

Dis Na Polikabɔnɛt we Kɔt Had Ɔ Skrach?

Di kɔrɛnt sɔs de aydentify dis prodak as anti-UV, bɔt i nɔ de gi wan spɛshal abrashɔn-rɛsistant had-kɔt spɛsifikɛshɔn, Taber abrashɔn rizɔlt ɔ sɔfa-hadnɛs valyu.

If di prɔjek nid fɔ mek dɛn nɔ skrach, dɛn nid fɔ gɛt had kɔtin we nɔ de mek kemikal ɔ wan say we nɔ de abrashɔn fɔ mashin gad dɛn, motoka glaz ɔ panɛl dɛn we dɛn kin klin bɔku tɛm, tɔk bɔt dɛn tin dɛn de apat pas fɔ tek am se dɛn de wit di anti-UV tritmɛnt.

Layt Transmishɔn & Optik Klariti

Di prɛviɔs prodak kɔntinyu rɛfrɛns layt transmishɔn we go rich 88%. Aktual layt transmishɔn kin difrɛn wit tik, kɔlɔ, sɔfayz finish ɛn gred.

Fɔ skaylayt, akitekchral glazing ɔ optik aplikeshɔn, aks fɔ di aktual visible-layt transmishɔn ɛn haz valyu fɔ di ɛksaktɔ tik ɛn kɔlɔ pas fɔ aplay di maksimal valyu to ɛvri sheet matirial kɔnfigyushɔn.

Impekt Resistans fɔ mek yu nɔ gɛt ɛnitin fɔ du wit am

Polycarbonate na wan we dɛn kin pik bɔku bɔku wan fɔ in ay impak rɛsistɛns ɛn tafnɛs. Di fɔs HSQY prodak kɔntinyu rɛfrɛns dɛn impak rɛsistɛns lɛk 80 tɛm di wan we glas gɛt.

Fɔ spɛsifikɛshɔn dɛn we nid fɔ gɛt kwantifayd impak retinj, sefty-glazing klasifikeshɔn, ays rɛytin ɔ vandal-rɛsistɛns rikwaymɛnt, kɔnfɔm di rilevɛns tɛst we ɛn ripɔt fɔ di ɛksaktɔ tik ɛn gred pas fɔ abop pan wan jenɛral matirial kɔmpiashɔn nɔmɔ.

Tɛmpratura Pɛfɔmɛns

di ditayl infכmeshכn we de naw de rεfrεns wan tεmprachכ rεnj we de arawnd -40°C to +120°C.

Dis rεnj nɔ fɔ ɔtomɛtik intaprit as di kɔntinyu strɔkchɔral-yuz tɛmpracha ɔnda lod. Aplikeshɔn dɛn we gɛt fɔ du wit ɛlevɛt tɛmpracha, ripit tɛmal sayklin ɔ mɛkanikal lod fɔ yuz di aprɔpriet tɛknikal data fɔ di ɛksaktɔl polikabɔnɛt gred.

Faya Pɔfɔmɛnshɔn

Di fɔs HSQY pej kɔntinyu de rɛfrɛns wan Klas B1 flaym-rɛsistɛns rɛytin. Bɔt di tɛks we dɛn de gi naw nɔ de sho di rayt tɛst standad, spɛshal tik ɔ sɛtifiket we gɛt fɔ du wit da klasification de.

Projek dɛm we nid fɔ gɛt difayn faya retinj fɔ aks fɔ di aplikebul ripɔt fɔ di ɛksaktɔl sheet matirial tik, kɔlɔ ɛn gred bifo dɛn gri fɔ di matirial.

Anti-UV Polikarbonɛt fɔ Ruf & Kanopi

Anti-UV sɔlid polycarbonate kin yuz insay transparent ruf sistem, ɛntrɛ kanopi, patio ruf ɛn kɔba wokay usay ɔda wɛdabiliti ɛn impak rɛsistɛns impɔtant.

Ruf projɛkt fɔ spɛsifa sheet matirial tik, panɛl dimɛnshɔn, sɔpɔt spɛshal, ruf slɔp, UV-protɛkt sɔfays ɔriɛnteshɔn, briz lod ɛn sno lod. Di pej we de naw nɔ de pablish wan yunivasal strɔkchɔral span tebul, so tik nɔ fɔ pik frɔm sheet matirial saiz nɔmɔ.

Anti-UV Polikabɔnɛt fɔ Skylayt dɛn

Klia UV-protɛkt sɔlid PC sheet matirial fayn fɔ ɛvaluet insay skaylayt ɛn ruflayt usay dɛn nid fɔ gɛt ay transparency, wɛda rɛsistɛns ɛn impak tolɛreshɔn.

Fɔ skaylayt prɔjek, aks fɔ di aktual layt-transmishɔn valyu, UV kɔnfigyushɔn, alawable bɛnd rayus usay dɛn plan fɔ kɔba glazing, ɛn strɔkchɔral sɔpɔt rikwaymɛnt fɔ di tiknes we yu dɔn pik.

Anti-UV Polycarbonate fɔ Glazing na do

Glazing we de na do na wan pan di aplikeshɔn dɛn usay UV protɛkshɔn de gi di big valyu bikɔs di sheet matirial de kɔntinyu fɔ de na di solar raytin.

Tipik yus dɛn inklud transparent patishɔn, protɛktiv panɛl, shelta, balkɔn skrin, ɛntrɛ glaz ɛn ɔdasay. Dɛn fɔ kɔnfɔm di prɔjɛkt spɛshal sef ɔ bildin kɔd rikwaymɛnt dɛn sɛpret wan.

Polikabɔnɛt fɔ Grinhaus Glazing

Dɛn kin yuz klia sɔlid polikabɔnɛt fɔ grɛnhɔus glaz usay dɛn nid fɔ si dairekt, impak rɛsistɛns ɛn UV-protɛkt ɔda pefɔmɛns.

Fɔ grin haus usay tɛmral insuleshɔn na di men prayoritɛd, twinwɔl ɔ maltiwɔl polikabɔnɛt kin fayn mɔ bikɔs dɛn intanɛnt ɛya chɛmba dɛn kin ridyus ɔt transfɔm mɔ ifɛktiv wan pas wan sɔlid layt.

Industrial & Ikwipmɛnt Aplikeshɔn dɛn

Di fɔs prɔdak infɔmeshɔn de tɔk bak bɔt ilɛktronik, mɛkanikal ikwipmɛnt ɛn mɛdikal-ikwipmɛnt aplikeshɔn dɛn. Sɔlid polycarbonate kin yusful fɔ kɔva, haus, gad ɛn fabricated kɔmpɔnɛnt bikɔs ɔf in impak resistans, dimɛnshɔnal stebiliti ɛn ilɛktrik prɔpati.

Fɔ ilɛktroniks, mɛdikal divays ɔ ɔda spɛshal aplikeshɔn dɛn we dɛn dɔn rigul, yuz di gred we fit ɛn aks fɔ di dɔkyumɛnt dɛn we dɛn nid fɔ fala. Wan ɛkstirian anti-UV gred nɔ fɔ ɔtomɛtik fɔ tek am se i satisfay ɛvri mɛdikal, ilɛktrik ɔ it-kɔntakt rikwaymɛnt.

Aplikeshɔn Pikchɔ dɛn

Kɔt, Drlin & Fabrikeshɔn

Sɔlid polikabɔnɛt kin kɔt, drɔ, rout, fɔm ɛn mek yuz fayn plastic-prɔsɛsin tul ɛn kɔndishɔn.

Klin & Mentɛnans

Fɔ klin ɔltɛm, yuz klin wata, sop we nɔ gɛt wan bɔt ɛn wan saf klos ɔ spɔnj we nɔ de abrayd. Nɔ yuz abrasive pad dɛn we kin skrach di say we yu de.

Kεmikכl dεm fכ klin fכ klin wit polikabכnet. Strɔng sɔlvɛnt ɔ kemikal dɛn we nɔ kɔmpitabl kin mek strɛs krak ɔ sɔfa damej, mɔ rawnd ol dɛn we dɛn dɔn drɔ, eria dɛn we bɛn ɔ kɔmpɔnɛnt dɛn we strɛs bad bad wan.

Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Anti-UV Polycarbonate shit

Wetin na anti-UV polikabɔnɛt sheet matirial ?

Na polycarbonate sheet matirial we dɛn mek wit ɛnhans protɛkshɔn agens ɔltra vayolɛt ɛksplɔshɔn fɔ ɛkstirian aplikeshɔn dɛn lɛk ruf, skaylayt, kanopi ɛn ɔda glaz.

Us tik tik dɛn de?

Di kɔrɛnt layv HSQY prodak paramita dɛn list 0.8mm to 15mm.

Us sheet matirial saiz dɛn de?

Di prodak list we de naw inklud 1220×2400mm, 1200×2150mm ɛn kɔstɔm saiz dɛn.

Dis na sɔlid polycarbonate sheet matirial ɔ polycarbonate film?

Di prodak we de naw de ɔnda Sɔlid Polikabɔnɛt Shit wit 0.8-15mm prodak-lɛvɛl tiknɛs rɛnj. Di fɔs pej kɔntinyu we gɛt 0.05-0.25mm fim spɛsifikɛshɔn dɛn nɔ fɔ yuz as di men spɛsifikɛshɔn fɔ dis prɔdak.

Di sheet matirial gɛt 10 ia UV protɛkshɔn?

Di infɔmeshɔn bɔt di prɔdak we de naw de tɔk bɔt UV protɛkshɔn fɔ te 10 ia. Baya dɛn we nid fɔmal garanti fɔ kɔnfɔm di rayt warranty tɛm, prɔpati dɛn we dɛn kɔba ɛn instɔleshɔn kɔndishɔn fɔ di ɛksaktɔl sheet matirial .

Yu tink se polikabɔnɛt de blok di UV rayt?

UV-protεkt polycarbonate dεn mek am fכ ridyus UV-rεlatεd dεgradashכn fכ di sheet matirial εn i kin filta UV rεdyushכn bak dipכnt pan di εksakεt prodakt kכnstrכkshכn. Rikwest spɛktral-transmishɔn data if dɛn nid fɔ gɛt difayn UV-blɔk pasɛnt.

Yu tink se UV protɛkshɔn de na wan say ɔ ɔl tu di say dɛn?

Di spɛsifikɛshɔn we dɛn de gi naw nɔ de difayn di kɔnfigyushɔn. Kɔnfɛm if di sheet matirial we yu dɔn pik gɛt wan-sayd ɔ tu-sayd UV protɛkshɔn bifo yu instɔl am.

Us say fɔ fes di san?

Fɔ wan-sayd UV-protɛkt sheet matirial , di say we dɛn protɛkt fɔ fes di san. Fɔ fala di mak dɛn we de na di fim we dɛn gi yu fɔ protɛkt yusɛf ɔ di tɛknikal dɔkyumentri.

Yu tink se anti-UV polycarbonate go tɔn yɔlɔ?

UV protɛkshɔn na fɔ ridyus di yɔlɔ we yu de na do. Wan patikyula yɔlɔ garanti fɔ jɔs de akɔdin to di warranty we de fɔ di gred we dɛn gi.

Wetin na di layt transmishɔn?

Fɔs prodak kɔntinyu rɛfrɛns te to 88% layt transmishɔn. Aktual transmishɔn dipen pan tik, kɔlɔ ɛn sɔfayz finish, so aks fɔ data fɔ di ɛksaktɔl sheet matirial kɔnfigyushɔn.

Yu tink se anti-UV polycarbonate strɔng pas glas?

Polikabɔnɛt de gi bɔku ay impak rɛsistɛns pas kɔvɛnshɔnal glas. Di fɔs HSQY kɔntinyu rɛfrɛns te to 80 tɛm big impak rɛsistɛns, bɔt prɔjek dɛn we nid kwantifay rɛytin fɔ yuz di aplikebul tɛst data.

Yu tink se anti-UV polycarbonate fayn fɔ mek ruf?

Yes, yu kin yuz fayn UV-protɛkt sɔlid polikabɔnɛt fɔ ruf, skaylayt ɛn kanopi we sheet matirial tik, panɛl span, sɔpɔt spɛshal ɛn strɔkchɔral lod dɛn dɔn spɛsifa kɔrɛkt wan.

Yu tink se dɛn kin yuz am na do?

Yɛs. Yuz na do na di men rizin fɔ spɛsifa ɛnhans UV protɛkshɔn. Kɔnfɛm di sayd we dɛn protɛkt, di warranty kɔndishɔn ɛn di envayrɔmɛnt rikwaymɛnt dɛn bifo yu instɔl am.

Di sheet matirial skrach resistant?

Anti-UV protɛkshɔn nɔ min ɔtomɛtik wan fɔ abrashɔn-rɛsistant had kɔtin. If yu nid fɔ mek yu nɔ skrach, sho wan fayn had-kɔt polikabɔnɛt gred sɛpret wan.

Us surface finish dɛn de we dɛn kin gɛt?

Di fɔs ditayl prodak kɔntinyu de list smol, frɔst, glos ɛn mat sɔfays opshɔn dɛn. Konfam avaylabl fɔ di 0.8-15mm tik we dɛn nid.

Us tɛmpracha rɛnj dɛn rayt?

di ditayl infכmeshכn we de naw de rεfrεns lεk -40°C to +120°C. Krio aplikeshɔn dɛn fɔ kɔnfɔm di rayt tɛknikal data fɔ di gred we dɛn dɔn pik.

Di sheet matirial gɛt B1 faya raytin?

Di tin dɛn we de insay di pej we de bifo de tɔk bɔt Klas B1. Bikɔs dɛn nɔ no di rayt standad ɛn di tik we di spɛshal wan tik na di kɔntinyu we dɛn gi, aks fɔ di rilevɛns faya-tɛst ripɔt bifo yu yuz dis klasifikeshɔn insay wan prɔjek spɛsifikɛshɔn.

Yu tink se dɛn kin kɔt ɛn drɔ di sheet matirial ?

Yɛs. Sɔlid polikabɔnɛt kin kɔt, drɔ ɛn rout yuz fayn plastic-wok tul ɛn fabrikeshɔn we.

Yu tink se polikabɔnɛt kin kol kɔba?

Suitabl sɔlid polikabɔnɛt kin kol kɔba insay tik-spɛsifi k limit. Kɔnfɛm di minim bɛnd rayus bifo dizayn ɔ instɔleshɔn.

Aw dɛn fɔ klin di anti-UV polycarbonate?

Yuz mild sop wata ɛn wan saf klos ɔ spɔnj we nɔ de abrayd. Nɔ yuz abrasive pad ɛn kemikal dɛn we nɔ kɔmpitabl wit polycarbonate.

Wetin na di MOQ?

Di ditayl infɔmeshɔn we de naw de list wan minim ɔda kwantiti we na 1000kg.

Wetin na di tɛm we dɛn kin sɛn di tin?

Di sɔs we de naw de list lɛk 7-15 dez afta dɛn dɔn put di mɔni, i dipen pan di ɔda tin dɛn we dɛn nid.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di aplikeshɔn, tiknes, sheet matirial dimɛnshɔn, kɔlɔ, sɔfayz finish, UV-protɛkshɔn rikwaymɛnt, optik rikwaymɛnt, fabrication nid, rikwayd dɔkyumentri, kwantiti ɛn dɛstineshɔn.

Packaging & Dilivri fɔ di tin dɛn we dɛn de du

• Sampul Pak: Shit dɛn we de insay PE bag dɛn we de protɛkt, we dɛn pak insay katon.

• Sheet Packaging: 30kg fɔ wan bag wit PE film, ɔ as dɛn nid am.

• Palet Palet: 500-2000kg fɔ wan plai wud palet.

• Kontena Lod: 20 tan, optimiz fɔ 20ft/40ft kɔntena.

• Dilivri Tɛm dɛn: FOB, CIF, EXW.

• Lid Taym: 7-15 dez afta dipɔsit, dipen pan ɔda volyum.

Sɛtifiket dɛn we dɛn kin gi

Di kɔrɛnt ditayl prodak infɔmeshɔn rɛfrɛns SGS ɛn ISO 9001:2008. Di wan dɛn we de bay fɔ kɔnfɔm di skɔp, vɛshɔn ɛn aplikebiliti fɔ di dɔkyumɛnt dɛn we de fɔ di ɛksaktɔl polikabɔnɛt gred, tik ɛn di dɛstineshɔn-maket rikwaymɛnt.

Globɛl Ɛgzibishin dɛn

Bɔt HSQY Plastik Grup

HSQY Plastic Group se dɛn dɔn wok fɔ pas 20 ia ɛn dɛn de ɔpreshɔn 8 faktri dɛn, we de saplae plastic matirial fɔ pak, kɔnstrɔkshɔn, mɛdikal ɛn industrial aplikeshɔn dɛn.

Anti-UV polycarbonate projɛkt dɛn kin tɔk bɔt akɔdin to tik, sheet matirial dimɛnshɔn, kɔlɔ, sɔfayz finish, ɔdasay ɛksplɔshɔn, UV-protɛkshɔn rikwaymɛnt, optik pefɔmɛns, fabrikeshɔn, sɛtifikeshɔn, ɔda kwantiti ɛn dɛstineshɔn.