11-Layer PA / PP / EVOH / PE Ay Barɛri Kɔɛkstrushɔn Film

11-Layer PA / PP / EVOH / PE Ay Barɛri Kɔɛkstrushɔn Film

HSQY 11-layer PA/PP/EVOH/PE ay barɛri coextrusion film na wan multilayer fleksibul pak matirial we dɛn mek fɔ aplikeshɔn dɛn we nid strɔng ɔksijɛn barɛri, pankchɔ rɛsistɛns, ɔt silin ɛn kɔstɔmayz rol spɛsifikɛshɔn.

Di strɔkchɔ we de naw na PA/TIE/PP/TIE/PA/EVOH/PA/TIE/PE/PE/PE. EVOH de gi di praymari ɔksijɛn ɛn gas barɛri, PA de kɔntribyut mɛkanikal trɛnk ɛn pankchɔ rɛsistɛns, we di polyolefin layers de sɔpɔt mɔstɔ rɛsistɛns, fleksibiliti, silin pefɔmɛns ɛn protɛkshɔn fɔ di intanɛnt barɛri strɔkchɔ.

HSQY de saplae film frɔm lɛk 0.03mm to 0.45mm in tik ɛn 200mm to 4000mm in waid. Film gej, wit, rol dayamita, kɔr saiz, barɛri lɛvɛl, sil bihayvya, sɔfayz tritmɛnt ɛn printin rikwaymɛnt dɛn kin kɔstɔmayz akɔdin to di pak prodak ɛn pak mashin.

Di film kin evaluet fɔ vaykum pak, fleksibul it pak ɛn sɛlɛkɛt thermoforming aplikeshɔn. Ritort, boilable, medikal sterilayzeshɔn ɛn ɔda dimand tɛmal ɔ rigyuletɔri aplikeshɔn dɛn nid fɔ gɛt spɛshal ɛnjinɛri strɔkchɔ ɛn aplikeshɔn-spɛsifi k validɛshɔn pas fɔ tek am frɔm di matirial kɔmbaynshɔn nɔmɔ.

PA/PP/EVOH/PE Ay Barɛri Film Imej dɛn

11-Layer High Barrier Film Spɛsifikeshɔn dɛn

Aw di 11-Layer PA/PP/EVOH/PE Strukchɔ de Wok

Multilayer coextrusion de alaw difrεn polimכr dεm fכ du difrεn fכnshכn dεm insay wan singl film. insted fכ nid wan polimכr fכ gi כl di mεkanikal, barεri, silin εn prכsεsin prכpati dεm, εvri layεr kin optimiz fכ wan spεsifi k rol.

Wetin Mek Dɛn De Yuz EVOH insay Ay Barɛri Pakɛj

EVOH de yuz insay multilayer pakej fכs biכs fכ in rili lכw כksijεn εn gas pεrmiabiliti kכmpεr wit kכmכn komoditi plastic.

כksijεn barεri imכtant fכ prodakt dεm we kin εkspiriεns כksidεshכn, kכla chenj, aroma lכs, rancidity כ כda kwaliti dεtiryushכn we dεn de εkspos to כksijεn we dεn de stכr.

EVOH na sεnsitiv to envayroment humidity, so i nכmal fכ protεkt insay wan mכltilayεr strכkchכ bay polyolefin layεr dεm lεk PE כ PP. Dis na di rizin we mek dɛn fɔ evaluate barɛri pefɔmɛns fɔ di kɔmplit multilayer film pas frɔm di EVOH layt nɔmɔ.

Oksijɛn Barɛri ɛn OTR

Oksijɛn Transmishɔn Rɛt, ɔ OTR, na wan pan di impɔtant spɛsifikɛshɔn fɔ wan pak fim we gɛt EVOH. lכw OTR jεnarali indikεt strכng rεsistεns to כksijεn transmishכn כnda di stet tεst kכndishכn dεm.

OTR de inflɔws bay EVOH gred, EVOH tik, totɛl layt strɔkchɔ, ɔvala film tik, rilitiv humiditi, tɛmpracha ɛn fɔm kɔndishɔn. So i nɔ fɔ aplay wan singl jenɛrik OTR valyu to ɛvri PA/PP/EVOH/PE film.

If yu projɛkt spɛsifa wan OTR target, gi di tɛst we dɛn nid, tɛmpracha, rilitiv humiditi ɛn target valyu so dat dɛn go ebul fɔ evaluate di film strɔkchɔ kɔrɛkt wan.

Wata Vapour Barɛri ɛn WVTR

Wata Vapour Transmission Rate, ɔ WVTR, de tɔk bɔt di amount of wata vapour we de pas tru wan pak matirial ɔnda spɛshal kɔndishɔn dɛn.

Insay dis multilayer film, di mɔstɔ protɛkshɔn na di polyolefin layers de sɔpɔt am mɔ pas fɔ diskrayb EVOH insɛf as mɔstɔ-baria rɛsin. di PE εn PP kכmכpכnt dεm de εp fכ ridyus wata-vεpכr transmishכn εn protεkt di intanεt EVOH כksijεn-baria layεr frכm humiditi.

Baya dɛn we gɛt wan patikyula WVTR rikwaymɛnt fɔ gi di target tɛst kɔndishɔn bikɔs WVTR kin difrɛn wit di polima strɔkchɔ, tiknɛs, tɛmpracha ɛn humiditi.

High Barrier Film fɔ Vaykum Pakɛj

Vaykum pak de pul bɔku pan di briz we de rawnd wan prɔdak bifo dɛn sial di paket. fכ כksijεn-sεnsitiv prodakt, wan hכy barεri film kin εp fכ ridyus כksijεn we de kam afta dat tru di paket wכl.

PA de kכntribyut tofnes εn pankshכn rεsistεns as di pakej kכnfכm klos arawnd di prodak, we EVOH de gi כksijεn barεri εn di PE sayd de gi hεt-silin fכnshכnaliti insay di kכrant listed strכkchכ.

Fresh ɛn Prosɛs Mit

hεy-baria vεkyum film dεm kin evaluate fכ fresh mit, prכsεs mit, sosish εn כda protin prodak dεm usay כksijεn protεkshכn, pankshכn rεsistεns εn sil integriti imכtant.

Fish ɛn Sifud

Sifud pak nid fɔ tek tɛm kɔntrol di paket intagriti, stɔrɔj ​​tɛmpracha ɛn maykrobayolojikal sef. Film sɛlɛkshɔn fɔ validet togɛda wit di aktual sifud prodak ɛn di kol-chen kɔndishɔn dɛn we dɛn nid.

Chiz ɛn Dairy Prodakt dɛn

Film dεm we gεt EVOH kin εp fכ protεkt כksijεn-sεnsitiv chiz εn sεlekt dεyri prodakt dεm we PA de kכntribyut mεkanikal rεsistεns we dεn de pak vεkyum εn distribyushכn.

High Barrier Film fɔ Tɛmofɔmin

Suitabl PA/EVOH/polyolefin strכkchכ dεm kin yuz as tεmכfכm bכtכm wεb. We dɛn de mek di fim we dɛn de mek di fim we dɛn kɔl thermoforming, dɛn kin ɔt di fim ɛn drɔ am insay wan kaviti bifo dɛn lod di it ɛn dɛn kin sial wan kɔmpatib tɔp wɛb to di paket.

fכm de strεch εn tin di film, mכtalman arawnd di kכna dεm εn dip kכva dεm. Wan film we de gi adekwat barɛri bifo i fɔm kin gɛt difrɛn lokal tik ɛn barɛri pefɔmɛns afta dip drɔ.

Fɔ thermoforming projɛkt, spɛsifa kaviti lɔng, wit, dip, kɔna rayus, fɔm tɛmpracha, layn mɔdel, pakej wet ɛn rikwayd barɛri pefɔmɛns so di aprɔpriet gej ɛn strɔkchɔ kin ebul fɔ evaluate.

PA/PE Midiɔm Barɛri vs PA/EVOH/PE Ay Barɛri Film

Printable ɛn Kɔlɔ Print Ay Barɛri Film

Print fleksibul pak de alaw fɔ put brand grafik, prodak infɔmeshɔn, barɔd, pripia instrɔkshɔn ɛn rigyuletɔri infɔmeshɔn insay di pakej.

Print pefɔmans dipen pan di ɔta polima layt, sɔfa tritmɛnt ɛn sɛlɛkɛt ink sistɛm. If yu nid fɔ print wit kɔlɔ, sho di we aw yu fɔ print, di nɔmba fɔ di kɔlɔ dɛn, di art wok, di say we yu print ɛn di we aw yu nid fɔ trit di say we yu de.

Dɛn fɔ tɛst di fim we dɛn print tru di kɔmplit pak prɔses, inklud fɔ fɔm usay i apɔynt, ɔt silin, vaykum, kol stɔrɔj ​​ɛn pak handel, fɔ kɔnfɔm se di say we dɛn print de kip di adheshon ɛn apinans we dɛn nid.

Ki Pɛfɔmɛns Rikwaymɛnt fɔ Ay Barɛri Fim

Di kɔrɛnt sɔs matirial nɔ de gi verify numɛrik OTR, WVTR, sil-strɛngth, pankchɔ ɔ tɛnsiɛl valyu fɔ dis ɛksaktɔl fim. If dɛn paramita ya impɔtant to yu spɛsifikɛshɔn, aks fɔ di gred-spɛsifi k tɛknikal data ɔ tɛst pas fɔ yuz jenɛrik ay-baria valyu dɛn.

Fɔd we dɛn dɔn chil ɛn we dɛn dɔn frɔz

PA-kɔntinɛnt multilayer film dɛn kin kɔmɔn fɔ tink bɔt usay paket dɛn nid taf we dɛn de frij, friz ɛn distribyushɔn. Film fleksibiliti, impak resistans ɛn sil intɛgriti fɔ stil evalyu na di aktual stɔrɔj ​​tɛmpracha.

Fɔ frɔzɛn prodak, spɛsifa di minim stɔrɔj ​​tɛmpracha, friz we, di prɔdak wet, shap-ɛj risk, drɔp kɔndishɔn ɛn di shelf layf we dɛn nid.

Dis Fim Fayn fɔ MAP?

EVOH-kɔntinɛnt ay-baria fim dɛn kin fɔm pat pan Modified Atmosphere Packaging sistem, bɔt MAP pefɔmɛns dipen pan di kɔmplit pakej dizayn pas di film nɔmɔ.

MAP projɛkt dɛn fɔ spɛsifa di prodak, target gas miksɔp, rɛsɛdyual ɔksijɛn rikwaymɛnt, stɔrɔj ​​tɛmpracha, shelf layf we dɛn want, fɔm dip, tɔp-wɛb strɔkchɔ ɛn siling kɔndishɔn.

Fɔd sef ɛn shelf layf fɔ validet fɔ di kɔmplit MAP prɔses bay di fud prodyusɔ ɔ di rayt tɛknikal spɛshal pipul dɛn.

Retort ɛn Boilable Packaging Rikwaymɛnt dɛn

di prεsεns fכ PP εn EVOH insay wan mכltilayεr strכkchכ nכ de mek כtomatכk εvri film fit fכ rεtכt כ bכyl aplikεshכn.

rεtכt prכsεsin kin εkspכz di pak to aprכksimatli 121°C כ כda εlevεt tεmprachכ-prεshכn saykl dεm, dipכnt pan di prכsεs. Silant tayp, tay layers, EVOH gred, PA gred, layt ratios ɛn totɛl film kɔnstrɔkshɔn ɔl fɔ disayn fɔ di tɛmal prɔses we dɛn nid.

If yu nid fɔ pak retort ɔ boilable, gi di ɛksaktɔl prɔses tɛmpracha, hold tɛm, prɛshɔn, fud tayp ɛn siling rikwaymɛnt so HSQY go kɔnfɔm if wan dediket strɔkchɔ de.

Medikal Pakɛj Nid fɔ gɛt Dediket Gret

Di HSQY sɔs infɔmeshɔn we de naw de list di mɛdikal pak bitwin di aplikeshɔn dɛn we pɔsin kin yuz. Bɔt di mɛdikal pak gɛt ɔda tin dɛn we dɛn nid we dipen pan di divays, steril-baria sistɛm, siling patna ɛn sterilayz we dɛn de yuz.

Wan film we dɛn mek fɔ ethylene oxide, gamma, electron-beam ɔ stim sterilization fɔ kwalifay spɛshal fɔ da sterilization prɔses de. Kompatibiliti wit mεdikal pepa, Tyvek-tayp sabstεrayt, nonwovens כ כda tכp wεb dεm tu nid sεparat evalueshכn.

Nɔ trit wan jenɛral SGS ɔ ISO kwaliti sɛtifiket as pruf fɔ se ɛvri vɛshɔn fɔ dis fim na aprɔv as steril mɛdikal pak sistɛm.

Kastom 11-Layer Coextrusion Film Opshɔn dɛn

• Kastom tiknes frɔm di aplikebul prodakshɔn rɛnj.

• Kastom rol widths op to di aplikebul mashin limit.

• Kastom multilayer strɔkchɔ akɔdin to di barɛri rikwaymɛnt dɛn.

• Difrɛn PA, EVOH, PP ɛn PE layt rεshɔn.

• Kastom OTR target we de ɔnda di tɛst we ɛn kɔndishɔn dɛn.

• Kastom WVTR rikwaymɛnt.

• Struktrɔ dɛn we dɛn kin pak wit vaykum.

• Tεrmoforming bכtכm-wεb strכkchכ dεm.

• I izi fɔ pul ɔ lɔk-sil bihayvya usay fayn strɔkchɔ dɛn de.

• Klia ɔ kɔstɔmayt kɔlɔ.

• Tritmɛnt fɔ di sɔfa we dɛn kin print.

• Kastom kɔlɔ printin.

• Kastom kor saiz ɛn rol dayamita.

• Ekspɔt rol pak ɛn palet kɔnfigyushɔn.

Infɔmeshɔn we Yu nid fɔ mek yu gɛt Ay Barɛri Fim Kɔt

• Prodakt we dɛn pak.

• Vaykum, thermoforming, MAP ɔ ɔda pak prɔses.

• Di fim strɔkchɔ we de naw if i de.

• Rikwayd tot ɔl film tik.

• Di rol wit we dɛn nid.

• Kor dayamita ɛn maksimal rol OD.

• OTR ɛn tɛst kɔndishɔn dɛn we dɛn nid.

• WVTR ɛn tɛst kɔndishɔn dɛn we dɛn nid.

• Tεrmoforming kaviti dip εn dimεnshכn dεm.

• Pak mashin brand ɛn mɔdel.

• Rikwayd sil patna ɔ top-wɛb matirial.

• I izi fɔ pul ɔ lɔk-sil rikwaymɛnt.

• Stɔrej tɛmpracha ɛn di shelf layf we dɛn nid.

• Ritort, pasteurization ɔ boiling prɔses if i apɔynt.

• Di we aw dɛn de print, di kɔlɔ dɛn ɛn di art wok dɛn if nid de.

• Rikwayd rigyuletɔri ɔ fud-kɔntakt dɔkyumentri.

• Trayal kwantiti ɛn ɛni ia kɔnsɔmshɔn.

• Di kɔntri we dɛn de go ɛn di pɔt.

Sɛtifiket ɛn Tɛknikal Dokumɛnt

Di sɛtifiket pikchɔ we de dɔŋ ya, dɛn kin kip am frɔm di ɔrijinal pej. Di wan dɛn we de bay fɔ kɔnfɔm di kɔrɛnt sɛtifiket vɛshɔn, validiti, manufakchurin skɔp ɛn if di dɔkyumentri aplay to di ɛksaktɔl fim strɔkchɔ ɛn di aplikeshɔn we dɛn want fɔ yuz.

Fɔ it, mɛdikal, ritɔt ɔ ɔda aplikeshɔn dɛn we dɛn dɔn rigul, aks fɔ aplikeshɔn-spɛsifi k dɔkyumentri pas fɔ abop pan wan jenɛral SGS ɔ ISO kwaliti sɛtifiket nɔmɔ.

HSQY Plastik Grup Globɛl Ɛgzibishin dɛn

HSQY kin mit fud prɔsesɔ, pak kɔnvɔta, distribyushɔn ɛn industrial bayer dɛn na intanashɔnal ɛgzibishin fɔ tɔk bɔt ay barɛri fim, tɛmɔfɔmin fim, lidding film ɛn kɔmplit fleksibul pak projɛkt.

High Barrier Film Prodakshɔn ɛn Pak

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt 11-Layer High Barrier Film

Wetin na 11-layer coextrusion film?

wan 11-layεr kכεkstrushכn film de kכmbayn ilevin fכnshכnal polimכr εn tay layεr dεm di tεm we wan kכεkstrushכn prכsεs de. di layεr dεm dεn sεlekt fכ gi prכpati dεm lεk כksijεn barεri, pankchכ rεsistεns, siling, mכsichכ protεkshכn εn prכsεsin pεrformεns.

Wetin na di strɔkchɔ fɔ dis HSQY fim?

Di strɔkchɔ we de na di list naw na PA/TIE/PP/TIE/PA/EVOH/PA/TIE/PE/PE/PE. Stɔkchɔ dɛn we dɛn kɔstɔmayz kin nid fɔ gɛt sɛpret prodakshɔn ɛn tɛknikal kɔnfɔmeshɔn.

Wetin mek dɛn yuz EVOH na di fim?

EVOH de gi strכng כksijεn, gas εn aroma barεri. i nכmal fכ posishכn insay mכltilayεr pak εn כda polimכr layεr dεm de protεkt am biכs in barεri pεrformεns de infכlכp bay humidity.

EVOH de gi mɔstɔ barɛri?

EVOH na di fכs tin we dεn kin pik fכ כksijεn εn gas barεri. Wata-vapour rεsistεns insay wan mכltilayεr strכkchכ de jεnarali sכpכt bay di pכlyכlεfin layεr dεm we de rawnd lεk PE εn PP.

Wetin mek dɛn de yuz PA fɔ mek fim we gɛt ay barɛri?

PA, we dεn kכl bak naylon, de ad mεkanikal trεnk, tכf εn pankshכn rεsistεns. Dɛn prɔpati ya kin yus mɔ pan vaykum ɛn tɛmfɔmin pakej dɛn.

Wetin na di tik rɛnj?

di kכrant prodakt spεsifikεshכn de list aprכksimatli 0.03mm to 0.45mm, we ikwal to 30-450μm. Faynal tik we de dipen pan di strɔkchɔ ɛn aplikeshɔn we dɛn nid.

Us rol wit dɛn de?

Di pej we de naw de sho di wit frɔm 200mm to 4000mm. Gi di mashin mɔdel, di rol wit we dɛn nid, di kɔr dayamita ɛn maksimal rol OD we yu de aks fɔ kot.

Dis fim fayn fɔ pak wit vaykum?

Dɛn kin yuz fayn strɔkchɔ fɔ vaykum pak fɔ mit, sifud, chiz ɛn ɔda prɔdak dɛn. Faynal film gej ɛn strɔkchɔ fɔ pik akɔdin to di prodak shep, pankchɔ risk, siling kɔndishɔn ɛn barɛri rikwaymɛnt.

Yu tink se dɛn kin mek di fim we gɛt tɛmɔfɔm?

Dɛn kin yuz fayn gred dɛn as tɛmɔfɔmin bɔt wɛb dɛn. Fɔ dip drɔ, gi fɔm dip, kaviti saiz, kɔna rayus ɛn mashin kɔndishɔn bikɔs di fim kin tan we i de fɔm.

Dis na MAP fim?

EVOH-kכntεn hεy barεri strכkchכ dεm kin yuz in sεlekt MAP sistεm dεm. Di gas miksɔp, di paket jɔyometri, OTR, sil intɛgriti, stɔrɔj ​​tɛmpracha ɛn shelf-layf rikwaymɛnt fɔ validet fɔ di kɔmplit pakej.

Yu tink se dɛn kin print dis fim wit kɔlɔ?

Wi kin tɔk bɔt di opshɔn dɛn we dɛn kin print ɛn we dɛn kin print wit kɔlɔ. Gi artwok, nɔmba fɔ di kɔlɔ dɛn, di we aw dɛn de print, print sayd ɛn ink we dɛn nid so dat dɛn go kɔnfyus di sɔfa tritmɛnt ɛn di printin spɛsifikɛshɔn.

Dis film fit fo retort pak?

Ritort kapabiliti nɔ fɔ asum fɔ di standad strɔkchɔ. Wan dediket film fɔ kɔnfyus akɔdin to di retort tɛmpracha, prɛshɔn, hold tɛm, it prodak ɛn sil rikwaymɛnt.

Yu tink se dɛn kin yuz am fɔ pak tin dɛn fɔ mɛn pipul dɛn?

Dɛn kin ebul fɔ evalyu di strɔkchɔ dɛn we dɛn dɔn pik fɔ di mɛdikal pak, bɔt dɛn fɔ spɛsifa di ɛksaktɔl stɛrilayzeshɔn prɔses, silin sabstret, rigyuletɔri rikwaymɛnt ɛn validɛshɔn we. Jɛnɛral fleksibul-pak fim nɔ fɔ ɔtomɛtik diskrayb as sterilizabl mɛdikal pak.

HSQY kin kɔstɔmayz di barɛri lɛvɛl?

Baria strɔkchɔ kin tɔk bɔt akɔdin to di OTR we dɛn nid, WVTR, totɛl tiknɛs, fɔm dip, prodak ɛn stɔrɔj ​​kɔndishɔn. Gi di target tɛst valyu ɛn di tɛst kɔndishɔn dɛn we i pɔsibul.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Duya gi di prɔdak we dɛn pak, di we aw dɛn pak am, di tik we di fim tik, di waid, di barɛri we dɛn nid, di dimɛnshɔn fɔ fɔm if i apɔynt, di mashin mɔdel, di patna fɔ sil, di kɔndishɔn fɔ kip di tin dɛn, di tin dɛn we dɛn nid fɔ print, di tin dɛn we dɛn nid fɔ du fɔ di lɔ ɛn di kwantiti we dɛn nid ɛvri ia.

Wetin Mek Yu Pik HSQY Ay Barɛri Kɔɛkstrushɔn Fim?

HSQY de saplae multilayer PA/PE, PA/EVOH/PE ɛn PA/PP/EVOH/PE fleksibul pak film fɔ vaykum pak, thermoforming, fud pak ɛn sɛlɛkɛt industrial aplikeshɔn.

Film tiknes, wit, multilayer strɔkchɔ, barɛri lɛvɛl, rol spɛsifikɛshɔn ɛn printabl kɔnfigyushɔn kin tɔk bɔt akɔdin to di bayer in pak ikwipmɛnt ɛn finish-prɔdakt rikwaymɛnt.

Fɔ nyu prɔjek, sɛn HSQY yu kɔrɛnt fim spɛsifikɛshɔn ɔ fizik fim sampul togɛda wit di pak mashin mɔdel, prodak ɛn di barɛri we yu nid. dis de alaw fכ evaluate di film as pat pan di komplit pak prכsεs pas כnli bay polimכr nem.