Lɔw Ɛn Ay Tɛmpratura Stretch Film, Ay Barɛri PA/PP/EVOH/PE Film, 11-layer Kɔ-ɛkstrushɔn Film

11-Layer PA/PP/EVOH/PE High Barɛri Tɛrmofɔmin Film

HSQY 11-layer PA/PP/EVOH/PE ay barɛri film na wan multilayer co-extruded pakej film we dɛn divɛlɔp fɔ vaykum pak, thermoforming, chilled fud, frɔzɛn it ɛn sɛlɛkɛt ay-tɛmpracha fud pak aplikeshɔn.

Di multilayer strɔkchɔ kɔmbayn PA fɔ mɛkanikal trɛnk ɛn pankchɔ rɛsistɛns, EVOH fɔ ay ɔksijɛn barɛri pefɔmɛns, PP ɛn PE fɔ sial, fleksibiliti ɛn mɔstɔ rɛsistɛns, ɛn tay layers fɔ stebul adheshon bitwin difrɛn polima dɛn.

HSQY de saplae ay barɛri kɔ-ɛkstrushɔn film insay tiknɛs frɔm 0.045mm to 0.35mm ɛn wit frɔm 160mm to 2600mm. Film tiknes, rol wit, layt strɔkchɔ, barɛri lɛvɛl ɛn silin prɔpati dɛn kin kɔstɔmayz akɔdin to di it we dɛn pak, tɛmfɔmin mashin, stɔrɔj ​​kɔndishɔn ɛn di tɛmpracha we dɛn nid fɔ prosɛs.

       Rikwest High Barrier Film Kot & Sampul    

PA/PP/EVOH/PE Ay Barɛri Film Imej dɛn

Wetin Na 11-Laya Ay Barɛri Kɔ-ɛkstrushɔn Film?

11-layεr ay barεri film na kכ-εkstrud fleksibul pak mεtirial we mכltipכl fכnshכnal polimכr layεr dεm de kכmbayn di tεm we dεn de prodyuz. εvri layεr de du wan spεsifi k rol lεk כksijεn barεri, pankshכn rεsistεns, mכsishכn rεsistεns, hεt siling, mεkanikal sכpכt כ layεr adheshon.

Dis multilayer aprɔch de alaw pak disayna fɔ ajɔst pefɔmɛns we go at fɔ gɛt frɔm wan singl polima. Di fainal strɔkchɔ kin ɔptimayz akɔdin to di kayn it, shelf-layf target, pak prɔses, thermoforming dip, siling rikwaymɛnt ɛn stɔrɔj ​​kɔndishɔn.

Dɛn kin yuz ay barɛri kɔ-ɛkstrud fim dɛn as tɛmɔfɔmin bɔt wɛb, vaykum pak fim ɛn fleksibul pak strɔkchɔ fɔ mit, sifud, chiz, sosish, rɛdi it ɛn ɔda prɔdak dɛn we gɛt ɔksijɛn.

PA/PP/EVOH/PE High Barrier Film Spɛsifikeshɔn dɛn

Di spesifikeshɔn dɛn we de dɔŋ ya na bays pan di HSQY prodak infɔmeshɔn we de naw. Faynal strɔkchɔ ɛn pefɔmɛns fɔ kɔnfɔm akɔdin to di fim gred we dɛn dɔn pik ɛn di we aw dɛn pak am.

Aw di PA/PP/EVOH/PE Multilayer Strukchɔ de Wok

PA Layer – Pankchɔ Rɛsistɛns ɛn Mɛkanikal Strɔng

Polyamide, ɔ PA, de gi mɛkanikal tafnɛs, pankchɔ rɛsistɛns ɛn trɛnk. Dɛn prɔpati ya impɔtant mɔ we yu de pak mit we gɛt bon, sifud shɔɛl, chiz blɔk ɛn prɔdak dɛn we gɛt shap ɔ irɛgyula ed.

EVOH Layer – Ay Ɔksijɛn Barɛri

EVOH de gi di prinsipal כksijεn εn gas barεri fכnshכn. כksijεn transmishכn we lכs kin εp fכ ridyus כksidεshכn, aroma lכs εn kwaliti dεtiryushכn we dεn disayn di komplit paket εn stכrej kכndishכn kכrekt wan.

Bikɔs EVOH barɛri pefɔmɛns kin inflɔws bay mɔstɔ, i nɔmal fɔ protɛkt insay wan multilayer strɔkchɔ pas fɔ yuz am as ɛksplɔz standalɔn film.

PP Layer – Hɛt Rɛsistɛns ɛn Silin Opshɔn dɛn

PP-based layers kin inkorpor we adishanal thermal resistance, stiffness ɔ PP-compatible siling pefɔmans nid fɔ de. Di aprɔpriet PP fɔmyulashɔn dipen pan di target siling ɛn tɛmal-prɔsesin kɔndishɔn dɛn.

PE Layer – Fleksibiliti, Silin ɛn Mɔstɔ Rɛsistɛns

PE de kontribyut fleksibiliti, silabiliti en wata-vapour resistans. PE-based siling strɔkchɔ dɛn de yuz bɔku bɔku wan fɔ vaykum ɛn thermoforming pak usay rili ɔt sil ɛn pakej fleksibiliti nid.

Tay Layers – Multilayer Adheshon

Tay layεr dεm de bon inkompatibl polimכr dεm tכgeda di tεm we dεn de kכ-εkstrushכn, we de εp fכ mek wan stebul intagreted strכkchכ εn ridyus di risk fכ intalayεr separeshכn.

Ki Ficha dɛn fɔ 11-Layer High Barrier Film

Ay Ɔksijɛn Barɛri: EVOH de gi strɔng ɔksijɛn ɛn gas barɛri pefɔmɛns fɔ it dɛn we nid fɔ kɔntrol ɔksijɛn.

Strɔng Pankchɔ Resistɛns: PA de ɛp di fim fɔ mek i nɔ panch ɛn mɛkanikal damej we i de fɔm, vaykum pak, transpɔt ɛn handel.

Tεmכfכm Pεrformεns: Dɛn kin fכm fayn strכkchכ dεm insay fleksibul kεviti fכ tεmכfכm bכtכm-wεb pak sistεm dεm.

Riliable Heat Sealing: Dɛn kin pik PP- ɔ PE-based siling layers akɔdin to siling tɛmpracha, pakej strɔkchɔ ɛn ikwipmɛnt kɔnfigyushɔn.

Vaykum Pakɛj Kɔmpatibiliti: Dɛn kin yuz fleksibul ay barɛri kɔnstrɔkshɔn na vaykum pak usay lɔw ɔksijɛn transmishɔn ɛn pak intɛgriti impɔtant.

Low-Temperature Options: Dɛn kin evalyu fayn strɔkchɔ fɔ chill ɛn frɔzɛn it aplikeshɔn usay film fleksibiliti ɛn resistans to krak fɔ de na lɔw tempɔret.

High-Temperature Options: Strukchɔ dɛn we dɛn mek fɔ pasteurization, boiling ɔ retort prɔses fɔ bi spɛshal wan fɔ di prɔsesin tɛmpracha, di tɛm ɛn prɛshɔn we dɛn nid.

High Transparency: Klia film de gi visibiliti fɔ pak prodak ɛn sɔpɔt atraktiv rital prɛzɛntɛnshɔn.

Kastom Barɛri Strukchɔ: Dɛn kin pik layt kɔmpɔzishɔn, film tiknɛs ɛn EVOH kɔntinyu akɔdin to di barɛri ɛn prɔsesin pefɔmɛns we dɛn nid.

Aplikeshɔn dɛn fɔ PA/PP/EVOH/PE Ay Barɛri Film

Fresh Mit Pakɛj: Dɛn kin yuz am fɔ bif, bɔd, bɔd ɛn prosɛs mit usay dɛn nid fɔ mek dɛn nɔ panch, fɔ mek di vaykum wok ɛn fɔ mek dɛn nɔ gɛt ɔksijɛn.

Sifud Pakɛj: Dɛn kin yuz fayn strɔkchɔ fɔ fresh ɔ frɔzɛn fish ɛn sifud usay mɛkanikal durabiliti ɛn barɛri pefɔmɛns impɔtant.

Chiz ɛn Dairy Packaging: Ay ɔksijɛn barɛri ɛn siling pefɔmɛns kin ɛp fɔ protɛkt chiz ɛn sɔm dairy prodakt dɛn we dɛn de kip am na frij.

Sosish ɛn Prosɛs Fɔd: Dɛn kin yuz fleksibul multilayer film fɔ vaykum-pak sosish, ham ɛn ɔda prɔses it prodak dɛm.

Frɔzɛn Fɔd Pakɛj: Dɛn kin pik strɔkchɔ dɛn we nɔ gɛt bɛtɛ tɛmpracha fɔ di prɔdak dɛn we dɛn kin kip ɔ transpɔt ɔnda frɔzɛn kɔndishɔn.

Rɛdi Mil: Dipen pan di kɔmplit film strɔkchɔ, dɛn kin ebul fɔ evaluate fayn ay barɛri gred fɔ chill, pasteurized ɔ ɔt-prosɛs redi-mil pak.

Retort ɛn Boilable Packaging: Spɛshal strɔkchɔ dɛn kin de fɔ thermal processing, bɔt di tɛmpracha, tɛm, prɛshɔn ɛn it-kɔntakt rikwaymɛnt dɛn we dɛn nid fɔ kɔnfɔm bifo dɛn pik di las fim.

       Tɔk bɔt yu Fɔd Pakɛj Aplikeshɔn    

High Barrier Film fɔ Tɛmofɔmin Pakɛj

Insay thermoforming packaging, dɛn kin ɔt di bottom film ɛn fɔm insay wan cavity bifo dɛn lod di food product ɛn sial di package wit top web. So di film pefɔmɛns fɔ balans fɔmabiliti, pankchɔ rɛsistɛns, barɛri prɔpati ɛn sil intɛgriti.

Di korekt film tiknes dipen pan fom dip, pakej dimenshon, prodak wet, prodak shep en di thermoforming mashin. Fim we tu tin kin lɔs tik na kɔna dɛn we dɛn drɔ dip, bɔt if i tik we yu nɔ nid, i kin mek di matirial kɔst bɔku.

We yu de aks fɔ thermoforming film, gi fɔm dip, kaviti dimɛnshɔn, mashin mɔdel ɛn egzistin film spɛsifikɛshɔn usay i pɔsibul so HSQY go ebul fɔ evaluate di mɔs aprɔpriet strɔkchɔ.

High Barrier Film fɔ Vaykum Pakɛj

Vaykum pak de pul big pat pan di briz we de rawnd di it bifo dɛn sial am. Dɔn wan ay barɛri film de ɛp fɔ stɔp ɔksijɛn fɔ go insay di paket we dɛn de kip am.

di strכkchכ dεm we gεt PA de gi yusful tכf we di film fכ kכnfכm klos klos arawnd mit, chiz, sifud כ irεgulεr prodakt dεm. Sil trɛnk impɔtant bak bikɔs ivin wan rili ay barɛri fim nɔ kin ebul fɔ mek di paket wok fayn if di sil nɔ kɔmplit ɔ i dɔn pwɛl.

Low Temperature vs. Ay Temperatur Barrier Film

Aw fɔ Pik di Rayt Ay Barɛri Fim

1. Difayn di Fɔd Prodakt

Start wit di prɔdak we dɛn pak: fresh mit, sifud, chiz, sosish, frɔzɛn it ɔ rɛdi it. Difrɛn prɔdak dɛn nid difrɛn ɔksijɛn, mɔstɔ ɛn mɛkanikal protɛkshɔn.

2. Kɔnfɔm di Pakɛj Prɔses

Kɔnfɛm if dɛn go yuz di fim fɔ pak vaykum, fɔ mek thermoforming, MAP, fɔ stɔrɔj ​​wit kol, fɔ stɔrɔj ​​we dɛn dɔn frɔz, fɔ pastɔrayz, fɔ bɔyl ɔ fɔ prosɛs fɔ ritɔt.

3. Difayn OTR ɛn WVTR Rikwaymɛnt dɛn

If yu pak spɛsifikɛshɔn de difayn wan Ɔksijɛn Transmishɔn Rɛt (OTR) ɔ Wata Vaypa Transmishɔn Rɛt (WVTR), gi di valyu we yu want ɛn di kɔrɛspɔndɛns tɛst kɔndishɔn dɛn. Barɛri valyu dɛn gɛt minin nɔmɔ we dɛn spɛsifa di tɛmpracha, humiditi ɛn di we aw dɛn de tɛst.

4. Kɔnfɔm di Tɛmofɔmin Dip

Fɔ bottom-wɛb thermoforming aplikeshɔn, gi kaviti lɔng, wit, dip ɛn kɔna rayus. Dip fכm de put big dimand pan film tiknes distribushכn εn pankshכn rεsistεns.

5. Kɔnfɔm di tin dɛn we yu nid fɔ sial

Gi di top-film ɔ siling matirial, siling tɛmpracha, di tɛm we yu de de ɛn prɛshɔn we i de. Di silan layt fɔ kɔmpitabl wit di pak sistɛm.

6. Difayn di Tɛmpratura Rɛnj

Nɔ spɛsifa ɔl 'lɔ tɛmpracha' ɔ 'ay tɛmpracha.' Gi di minim stɔrɔj ​​tɛmpracha ɛn maksimal prɔsesin tɛmpracha togɛda wit ɛksplɔshɔn tɛm ɛn prɔses tayp.

7. Kɔnfɛm di Mashin Kɔmpatibiliti

Gi yu thermoforming ɔ vaykum pak mashin brand, mɔdel, rol wit, kɔr dayamita ɛn maksimal rol dayamita. Dis de ridyus di risk fɔ bay fim we mit di matirial rikwaymɛnt bɔt nɔ de rɔn kɔrɛkt wan na di prodakshɔn layn.

Teknikal Data Baya dɛn fɔ Kɔnfɔm

Fɔ profeshɔnal it pak projɛkt, fim sɛlɛkshɔn fɔ bi bays pan mɛzhɔbal pefɔmɛns data fɔ di aktual gred pas di polima strɔkchɔ nɔmɔ.

• OTR – Ɔksijɛn Transmishɔn Rɛt

• WVTR – Wata Vapour Transmishɔn Rɛt

• Film tik ɛn tolɛreshɔn

• Tɛnsil trɛnk

• Elongation

• Pankchɔ rɛsistɛns

• Sil trɛnk

• Sil initiashɔn tɛmpracha

• Dip we de mek di thermoforming

• Haze ɔ transparency usay dɛn nid am

• Lɔw-tɛmpracha pefɔmɛns

• Maksimal thermal prɔsesin kɔndishɔn dɛn

• Fɔd-kɔntakt kɔmplians fɔ di dɛstineshɔn makit

Infɔmeshɔn Nid fɔ Wan Ay Barɛri Fim Kɔt

Fɔ gɛt kɔmɛnt kwik ɛn kɔrɛkt, duya gi dɛn infɔmeshɔn ya we yu de aks fɔ kot:

• Fɔd prodak we dɛn pak

• Vaykum, thermoforming, MAP, frɔzɛn ɔ tɛmal-prɔsesin aplikeshɔn

• Rikwayd film tik

• Width we dɛn nid fɔ mek di fim

• Rol lɔng ɔ rol wet

• Kor dayamita

• Di matirial strɔkchɔ we dɔn de if i de

• OTR ɛn WVTR we dɛn nid

• Tɛmofɔmin dip usay i apɔynt

• Sial matirial ɛn siling kɔndishɔn

• Minimum stɔrɔj ​​tɛmpracha

• Maksimal prɔsesin tɛmpracha ɛn di tɛm we dɛn kin tek

• Pak mashin brand ɛn mɔdel

• Kwantiti we dɛn nid ɔ yuz ɛvri ia

• Dɛn nid fɔ gɛt sɛtifiket fɔ kɔntakt fɔ it

• Di kɔntri we dɛn de go ɛn di pɔt

       Get 11-layer barɛri film prayz    

Sɛtifiket dɛn we dɛn kin gi

HSQY de gi kwaliti ɛn prodak dɔkyumentri we de akɔdin to di pakej fim gred we dɛn dɔn pik. Fɔ di fud pak projɛkt, duya gi di ɛksaktɔ dɛstineshɔn makɛt ɛn di it-kɔntakt, barɛri, maykreshɔn ɔ prɔsesin standad we dɛn nid so dat dɛn go kɔnfɔm di aplikebul dɔkyumentri bifo yu ɔda.

Globɛl Ɛgzibishin dɛn

HSQY Plastic Group de mit intanashɔnal pak manifakta, fud prɔsesɔ, distribyushɔn ɛn industri patna dɛn na plastic ɛn pak ɛgzibishin dɛn ɔlsay na di wɔl.

Prodakshɔn ɛn Pak

HSQY de saplae ay barɛri film in rol fɔmat wit kɔstɔmayz wit, tik, kɔr saiz ɛn ɛkspɔt pak akɔdin to di kɔstɔma rikwaymɛnt.

FAQ Bɔt 11-Layer Ay Barɛri Film

Wetin na 11-layer ko-ɛkstrushɔn fim?

wan 11-layεr kכ-εkstrushכn film de kכmbayn mכltipכl polimכr layεr dεm insay wan singl mεnεjmεnt prכsεs. di layεr dεm kin disayn fכ gi כksijεn barεri, pankshכn rεsistεns, siling, fleksibiliti, mכsich rεsistεns εn כda pak fכnshכn dεm.

Wetin mek dɛn de yuz EVOH insay ay barɛri fud pak fim?

EVOH de gi rili strכng כksijεn barεri pεrformεns εn i kכmכn fכ inkכrpor insay mכltilayεr strכkchכ dεm we prodak dεm nid protεkshכn εgεst כksijεn transmishכn, כksidεshכn εn aroma lכs.

Dis fim fayn fɔ mek dɛn mek di fim we dɛn kɔl thermoforming?

Yes, dɛn kin gi fayn fayn strɔkchɔ dɛn fɔ mek dɛn pak di tin dɛn we dɛn kin yuz fɔ mek tin dɛn we dɛn kɔl thermoforming. Gi yu fɔm dip, kaviti dimɛnshɔn, film tiknes, pak mashin ɛn pak prodak so dat dɛn go ebul fɔ evaluate di kɔrɛkt gred.

Yu tink se dɛn kin yuz dis fim fɔ pak tin dɛn wit vaykum?

Yɛs. PA/EVOH-based multilayer films na fayn fɔ bɔku vaykum fud pak aplikeshɔn usay pankchɔ rɛsistɛns, ɔksijɛn barɛri ɛn ɔt-sil pefɔmɛns nid fɔ de.

Yu tink se dɛn kin yuz di fim fɔ mek it we dɛn dɔn frɔz?

Dɛn kin pik strɔkchɔ dɛn we nɔ gɛt bɛtɛ tɛmpracha fɔ pak it we dɛn dɔn frɔz. Gi di minim stɔrɔj ​​tɛmpracha ɛn di stɔrɔj ​​tɛm we dɛn nid so dat dɛn go ebul fɔ evaluate di fayn film.

Yu tink se di fim fayn fɔ mek dɛn pak di fim we dɛn kɔl retort?

Retort suitability dipen pan di ekzak multilayer strɔkchɔ. Wan film fɔ jɔs diskrayb as retortable afta dɛn dɔn kɔnfyus di maksimal prɔsesin tɛmpracha, durayshɔn, prɛshɔn, it prodak ɛn di tɛst standad we dɛn nid fɔ da gred de.

Wetin na di difrɛns bitwin ay barɛri fim ɛn standad PA/PE fim?

wan ay barεri strכkchכ tipikli inkכrporεt wan adishכnal barεri rεsin lεk EVOH fכ ridyus כksijεn transmishכn. Standart PA/PE strכkchכ dεm kin gi gud mεkanikal εn mכsichכ prכpati bכt nכmal wan dεn gεt difrεn כksijεn barεri pεrformεns.

Us tik tik dɛn de?

Di HSQY prodak spesifikeshɔn we de naw de list wan tiknɛs rɛnj frɔm 0.045mm to 0.35mm. Customized tiknes kin diskus akɔdin to thermoforming dip, mɛkanikal rikwaymɛnt ɛn pak fɔmat.

Us film widths HSQY kin saplae?

HSQY naw de list di wit frɔm 160mm to 2600mm. Gi yu pak mashin wok wit ɛn rol rikwaymɛnt dɛn we yu de aks fɔ kot.

Yu tink se dɛn kin kɔstɔmayt di layt strɔkchɔ?

Yɛs. layεr strכkchכ dεn kin tכk bכt am akɔdin to כksijεn barεri, siling, pankshכn rεsistεns, fכm dip, mכsichכ rεsistεns εn tεmprachכ rikwaymεnt.

Us OTR ɛn WVTR di fim de gi?

OTR ɛn WVTR dipen pan film tiknɛs, EVOH kɔntinyu, kɔmplit multilayer strɔkchɔ ɛn tɛst kɔndishɔn. Baya dɛn we nid spɛshal valyu fɔ gi di target OTR ɔ WVTR togɛda wit di aplikebul tɛmpracha, humiditi ɛn tɛst we.

HSQY kin gi sampul fɔ mashin tɛst?

Dɛn kin tɔk bɔt sampul tɛst fɔ evaluate fɔm, silin, transparency, pankchɔ rɛsistɛns ɛn mashin kɔmpatibiliti bifo bɔku ɔda. Gi yu strɔkchɔ we yu nid, tik, waid ɛn aplikeshɔn we yu de aks fɔ sampul.

Us infɔmeshɔn dɛn nid fɔ kot?

Duya gi di it prodak, di we aw dɛn pak am, di tik, di waid, di barɛri we dɛn nid, dip fɔ fɔm, di kɔndishɔn fɔ sial, di minim ɛn maksimam tɛmpracha, di mashin we dɛn de pak, di kwantiti we dɛn kin pak ɛvri ia ɛn di kɔntri usay dɛn de go.

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae ay baria fleksibul pakej film, siling film, thermoforming film, fud trey ɛn ɔda plastic pak matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt fud prɔsesɔ, pak kɔnvɔta, trey manifakta ɛn distribyushɔn wit matirial sɛlɛkshɔn, kɔstɔmayz strɔkchɔ, sampul ɛvalueshɔn, rol spɛsifikɛshɔn ɛn ɛkspɔt saplai.

Send yu egzistin film spesifikeshɔn, pak mashin infɔmeshɔn ɛn target barɛri ɔ tɛmpracha rikwaymɛnt fɔ tɔk bɔt wan fayn PA/PP/EVOH/PE multilayer strɔkchɔ.

       Get Quote & Rikwest wan Sampul