Matte PET Film ɛn Shit Prodakt Vidio
Wach di vidio dɔŋ ya fɔ lan mɔ bɔt HSQY mat PET fim ɛn sheet matirial prodak fɔ print, fɔl bɔks, steshɔnari, vaykum fɔm, tɛmfɔmin ɛn industrial kɔnvɔyt aplikeshɔn.
Wetin Na Matte PET Film ɛn Shit?
Mat PET film ɛn sheet matirial na polyɛsta matirial dɛn we gɛt lɔw-glos, frɔst ɔ fayn fayn tɛkstɔr sɔfays. we yu kompare wit glossy transparent PET , di mat surface de ridyus visible riflεkshכn, prodyuz wan sכft apinεns εn i kin mek finga prεnt כ sכm sכm hεndlin mak dεm nכ notis.
HSQY de saplae tik-gej mat PET matirial in sheet matirial ɛn rol fɔm, wit tiknes frɔm 0.18 mm to 1.2 mm. Dis prodak rεnj na fכs fכ printin, foldin bכks, binding kכva, stεshכn, displei kכmכpכnt, vεkyum fכm εn tεmכfכm pas ultrathin fleksibl-pakεj film aplikεshכn.
Di matirial kin kɔstɔmayz bay tik, sheet matirial saiz, rol wit, sɔfays apinans, transparency, kɔlɔ ɛn pak we. Print tritmɛnt, protɛktiv film ɛn ɔda funkshɔn rikwaymɛnt dɛn fɔ kɔnfyus akɔdin to di las aplikeshɔn.
Mat lεvεl, haz, transparency, stiffness εn fכm pεrformεns kin difrεnt bay fכmyuleshכn εn prodakshכn prכsεs. Baya dɛn fɔ apruv wan fizik sampul bifo mas prodakshɔn we di vijual finish ɔ kɔnvɔyt pefɔmɛns impɔtant.
Daunlod PET Data Shit ![PET data sheet matirial PDF aykɔn]()
Daunlod PET Resin SGS Ripɔt ![PET resin SGS ripɔt PDF aykɔn]()
Rikwest Mat PET Prayz Rikwest wan PET Sampul
Matte PET plastic sheet we dɛn mek Prodakt Imej dɛn
![Transparent mat PET sheet matirial fɔ print ɛn thermoforming]( "Matte PET sheet")
Mat PET plastic sheet we dɛn mek
![Mat poliɛsta PET sheet matirial we dɛn de gi insay kɔstɔm saiz dɛn]( "Matt polyester sheet")
Matt Polyester Sheet we de na di wɔl
Matte PET Film ɛn Shit Spɛsifikeshɔn dɛn
| Prɔpati |
we De Spɛsifikeshɔn |
| Di Nem fɔ Prodak |
Mat PET Film, Mat PET plastic sheet we dɛn mek ɛn Mat Polistɛr Shit |
| Tin dɛn |
Polietilen Tɛriftalat ( PET ) . |
| Tayp fɔ Prodakt |
Tik-gej PET sheet matirial ɔ rol |
| Tik we i tik |
0,18 mm-1,2 mm |
| Standart Shit Sayz dɛn |
610 × 610 mm, 700 × 1000 mm, 915 × 1220 mm, 915 × 1830 mm ɛn 1220 × 2440 mm |
| Kastom Shit Sayz dɛn |
Avaylabl akɔdin to tik, kɔt tolɛreshɔn, ɔda kwantiti ɛn prodakshɔn fisibiliti |
| Rol Width we yu de yuz |
110 mm-1280 mm |
| Tik |
Na lɛk 1.35 g/cm³; fainal valyu dipכnt pan di spεsifi k fכmyuleshכn |
| Fɔm fɔ di Sapɔt |
Flat sheet matirial s, kɔt sheet matirial s, rol ɛn slit rol |
| Surface Finish na di wɔl |
Mat, frɔst ɔ lɔw-glos sɔfays |
| Di Kɔnfigyushɔn fɔ di Surface |
Singl-sayd mat, dabl-sayd mat ɔ kɔstɔmayz sɔfays kɔmbayn, sɔbjɛkt to kɔnfɔmeshɔn |
| Aw a luk |
Transparent, translucent, low-gloss ɔ kɔstɔmayz kɔlɔ |
| Di we aw dɛn de du di wok |
Print, day kɔt, skɔ, fold, vaykum fɔm, tɛmɔfɔm, lamin ɛn slit |
| Di Tritmɛnt fɔ Print |
Di opshɔn dɛn we kɔmpitabl fɔ print ɔ we dɛn trit di say we dɛn de print fɔ kɔnfɔm akɔdin to ink ɛn di we aw dɛn de print |
| Fim we de protɛkt pɔsin |
Available fɔ sɔm spɛsifikɛshɔn dɛn we yu nid fɔ gɛt ɔda skrach protɛkshɔn |
| Dokumɛnt dɛn we De |
PET data sheet matirial , SGS resin ripɔt ɛn aplikebul kwaliti-mɛnejmɛnt dɔkyumentri |
| Minimum Ɔda Kwantiti |
1000 kg we yu de yuz |
| Ɛgzampul |
A4 sheet matirial s ɔ limited-sayz sɛmpul dɛn we de; freyt na nɔmal wan dɛn kin gɛda am |
| Di Tɛm dɛn fɔ Pe |
30% dipɔsit ɛn 70% balans bifo dɛn ship am |
| Di Tɛm dɛn fɔ Delivri |
FOB, CIF ɛn EXW |
| Tipik Prodakshɔn Taym |
Aprɔksimatli 7-15 dez afta dipɔsit ɛn spɛsifikɛshɔn aprɔval |
Faynal tiknɛs tolɛreshɔn, dimɛnshɔnal tolɛreshɔn, mat lɛvɛl, haz, transparency ɛn prɔsesin pefɔmɛns fɔ kɔnfɔm tru wan aprɔv sampul ɔ bay spɛsifikɛshɔn.
Rikwaymɛnt dɛn we gɛt fɔ du wit it kɔntakt, ilɛktrik insuleshɔn, yuz fɔ mɛrɛsin, ɔt rɛsistɛns, faya pefɔmɛns, antistatik prɔpati ɔ spɛshal kemikal ristrikshɔn dɛn fɔ tɔk bɔt bifo dɛn prodyuz.
Ki Bɛnifit dɛn fɔ Mat PET plastic sheet we dɛn mek
Low-Gloss Matt Apirans we yu de luk fɔ
di mat surface de ridyus visible riflεkshכn dεm εn de mek wan sכft, mכr כndastated apinεns pas glossy PET . Dis de mek di matirial fayn fɔ prɛmiɔm pak, steshɔnari, print kɔva ɛn displei kɔmpɔnɛnt dɛn.
Gud Dimɛnshɔnal Stebiliti
PET de gi prɛktikal stiffnɛs ɛn dimɛnshɔnal stebiliti fɔ kɔt, print, fɔl ɛn mek plastic kɔmpɔnɛnt dɛn. Pɔfɔmɛnshɔn dipen pan tik, prodakshɔn dairekshɔn, tɛmpracha ɛn kɔnvɔyt kɔndishɔn.
Ridyus di Finga Prɛnt Visibiliti
finga prεnt, sכm sכm hεndlin mak dεm εn sכm sכm sכfayz impεrfεkshכn dεm jεnarali nכ de si bכku pan tεkschur mat sεf pas pan hεli polish transparent PET .
Di Tin dɛn we Yu Go Yuz fɔ Print ɛn Dɛkɔret
PET sɔfays dɛn we dɛn pripia fayn fayn wan kin sɔpɔt skrin printin, UV printin, ɔfset printin, fɔyl dɛkɔreshɔn, lɛbl ɛn ɔda grafik prɔses dɛn. Ink adheshon must test wit di selekt surface en curing sistem.
Die-Cutting ɛn Folding Pɔfɔmɛnshɔn
Suitabl PET gred dɛn kin day kɔt, skor ɛn fold insay pak winda, kɔva, sliv, divayda ɛn fɔl-bɔks kɔmpɔnɛnt dɛn. Tul, matirial dairekshɔn ɛn fɔl rayus fɔ validet bifo dɛn prodyuz.
Vaykum-Fɔm ɛn Tɛmofɔm Kapabiliti
Aprɔpriet mat PET sheet matirial gred dɛn kin ɔt ɛn fɔm insay trey dɛn , kɔva ɛn shep pak kɔmpɔnɛnt dɛn. Fɔm kin chenj di ɔrijinal sɔfayz tɛkstɔr, haz ɛn tiknɛs distribyushɔn, so prodakshɔn trayal dɛn nid fɔ de.
Mɔstɔ ɛn Kwɛmyuɛl Resistɛns
PET nכ de abzכp di mכsichכ we de na di sכfayz izi wan εn i de gi rεsistεns to plεnti tin dεm we dεn kin mit. Di kɔmpatibiliti wit spɛshal ɔyl, sɔlvɛnt, klin ɔ kemikal dɛn fɔ tɛst fɔ di kɔndishɔn dɛn we dɛn want fɔ ɛkspos.
Ilɛktrik Insuleshɔn Pɔtɛnɛshɔn
PET na in dɛn kin yuz insay sɔm ilɛktrik ɛn insuleshɔn aplikeshɔn dɛn, bɔt ilɛktrik pefɔmɛns kin difrɛn bay gred, tik, tɛmpracha ɛn tɛst standad. Wan dediket ilɛktrik-grɛd matirial fɔ spɛsifa we dɛn nid sɛtifiket insuleshɔn pefɔmɛns.
Kastom Shit ɛn Rol Saplai
HSQY kin saplae standad sheet matirial s, kɔstɔmayz kɔt sheet matirial s, ful-wid rol ɔ slit rol fɔ mach printin prɛs, fɔm layn, day-kat ikwipmɛnt ɛn matirial-yutilayzeshɔn rikwaymɛnt.
![HSQY PET matirial sɛtifiket ɛn tɛst dɔkyumɛnt dɛn]()
Mat PET plastic sheet we dɛn mek vs. Tin Mat BOPET film
Mat PET sheet matirial ɛn tin mat BOPET film na ɔl tu polyɛsta prodak, bɔt dɛn de sav difrɛn manufakchurin prɔses. Fɔ pik di kɔrɛkt prɔdak nid mɔ pas fɔ mach di frayz 'matte PET film.'
| Kɔmpiashɔn |
HSQY Tik-Gɛj Mat PET plastic sheet we dɛn mek |
Tin Mat BOPET film |
| Tipik Tiknɛs |
0,18 mm-1,2 mm |
Usually spesifik in maykron fכ tin fleksibul-film aplikεshכn |
| Strukchɔral Biɛvhɔ |
Semi-rigid ɔ rigid sheet matirial bihayvya |
Tin ɛn fleksibul fim bihayvya |
| Kɔmɔn Prɔsesin |
Shit printin, day kɔt, fold, vaykum fɔm ɛn thermoforming |
Wɛb printin, kɔtin, laminɛshɔn, mɛtalayz, ɔt transfa ɛn ɔt stamp |
| Tipik Aplikeshɔn dɛn |
Fɔlding bɔks, steshɔnari, print kɔva, trey dɛn ɛn rigid pak kɔmpɔnɛnt dɛn |
Lebul, fleksibul pak, laminat, stamp kyaria ɛn transfa-printin fim |
| Diskripshɔn fɔ di Sapɔt |
Shit, kɔt sheet matirial , tik rol ɔ slit rol |
Fleksibul jumbo rol ɔ smɔl wɛb rol |
Baya dɛn we de luk fɔ wan tin BOPET sabstret fɔ fleksibul pak, ɔt stamp ɔ ay-spid wɛb lamineshɔn fɔ gi di maykron tiknɛs, tritmɛnt, rol dayamita ɛn kɔtin we dɛn nid. Dis HSQY pej de kɔba fɔs tik-gej mat PET sheet matirial ɛn rol matirial.
Mat PET v. PET Sheet we gɛt glos
| Kɔmpiashɔn |
Mat PET plastic sheet we dɛn mek |
PET Sheet we gɛt glos |
| Di we aw di wɔl de luk |
Low gloss, frosted ɔ tɛkstɔr |
Smɔl, polish ɛn riflɛsɛf |
| Tan lɛk |
Ridyus di glare we pɔsin kin si |
Higher reflected aylayt dɛn |
| Fɔ du tin klia wan |
Difyuz ɔ sɛmi-transparent apinɛns |
Klia dairekt prodak visibiliti |
| Finga prɛnt dɛn |
Jɛnɛral wan nɔ kin notis so |
Jɛnɛral wan, i kin notis mɔ |
| Di Tipik Yuz dɛn |
Prɛmiɔm mat pak, kɔva, steshɔnari, print panɛl ɛn difyuz displei |
Klia bɔks, displei winda, blista pak ɛn ay-klari prodak prɛzɛnt |
Aplikeshɔn fɔ Mat PET Film ɛn Shit
Folding Boxes ɛn Ritayl Pakɛj
Mat PET sheet matirial kin day kɔt, skor ɛn fold insay translucent bɔks, sliv, pak winda ɛn dɛkɔretiv rital pak. Tik ɛn kris dizayn fɔ pik akɔdin to di bɔks dimɛnshɔn ɛn di prɔdak wet.
Printin ɛn Grafik Panɛl dɛn
Yu kin yuz gred dɛn we kɔmpitabl fɔ print fɔ panɛl dɛn we dɛn print pan skrin, kɔmpɔnɛnt dɛn we dɛn print wit UV, pak we dɛn print wit ɔfset, lɛbl dɛn, prɔmoshɔnal displei dɛn ɛn plastic kɔva dɛn we gɛt brand.
Steshɔn ɛn Bayndin Kɔva dɛn
Tipik steshɔnari yus inklud notbuk kɔva, binding kɔva, dɔkyumɛnt divayda, fɔlda, mɛnyu kɔva, kraft sheet matirial s ɛn protɛktiv print kɔva.
Vaykum-Fɔm ɛn Tɛmofɔm Pakɛj
Dɛn kin fɔm fayn gred dɛn to pak trey dɛn , protɛktiv kɔva, klos pak, rital insɛt ɛn ɔda tri-dimɛnshɔnal plastic pat dɛn.
Dekorativ ɛn Displei Kɔmpɔnɛnt dɛn
Mat PET kin yuz fɔ pɔynt-ɔf-pɔch panɛl, prodak displei, translucent insɛt, sayn ɛn dɛkɔretiv kɔmpɔnɛnt usay dɛn kin lɛk sɔbdued sɔfays.
Indastrial ɛn Ilɛktrik Kɔmpɔnɛnt dɛn
Dɛn kin yuz PET gred dɛn we dɛn dɔn pik fɔ sɛparatɔ, ɔvlay, protɛktiv sheet matirial s ɛn insuleshɔn kɔmpɔnɛnt dɛn. Ilɛktrik ɔ industrial pefɔmɛns fɔ verify agens di tɛknikal standad we dɛn nid.
Ɛksplɔrɔ mɔ PET sheet matirial prodakt fɔ pak, print ɛn tɛmɔfɔm aplikeshɔn.
![Matte PET sheet matirial we dɛn kin yuz fɔ steshɔnari ɛn binding kɔva]( "Matte PET sheet for stationery")
Matte PET plastic sheet we dɛn mek fɔ Steshɔnari
![Mat PET sheet matirial we dɛn yuz fɔ translucent folding bɔks pak]( "Matte PET folding box sheet")
Matte PET plastic sheet we dɛn mek fɔ Folding Bɔks dɛn
Aw fɔ Pik Mat PET plastic sheet we dɛn mek Tiknɛs
Di korekt tiknes dipen pan di finish pat dimɛnshɔn, rikwayd stiffness, prodak wet, folding we, printin ikwipmɛnt ɛn fɔm dip.
| Tiknes Dairekshɔn |
Jɛnɛral Karakta |
Tipik Aplikeshɔn dɛn |
| Na lɛk 0.18-0.30 mm |
Tin, i layt ɛn i nɔ kin izi fɔ chenj |
Binding kɔva, divayda, ɔvlay, smɔl pak winda ɛn layt folding pat |
| Na lɛk 0.30-0.50 mm |
Balans fɔ stiffnɛs ɛn fɔlding pefɔmɛns |
Steshɔnari, rital pak, folding bɔks, print panɛl ɛn shalo fɔm |
| Na lɛk 0.50-0.80 mm |
Greater rigidity ɛn dimɛnshɔnal sɔpɔt |
Big bɔks, shep kɔva, trey dɛn , displei panɛl ɛn midul-dip fɔm |
| Na lɛk 0.80-1.20 mm |
High stiffness wit big fɔm ɛn kris rikwaymɛnt |
Rigid komponent, protɛktiv kɔva, big panɛl ɛn hevi thermoformed pat dɛn |
Dɛn tik rɛnj ya na jenɛral sɛlɛkshɔn dairekshɔn pas fiks injinɛri spɛsifikɛshɔn. Wan sampul fɔ tɛst wit di aktual tul, ikwipmɛnt ɛn dizayn we dɔn dɔn.
Gaydlain fɔ Print ɛn Kɔnvɔyt
Skrin, UV ɛn Ɔfset Printin
Printin adheshon dipen pan di PET surface, ink kemistri, surface tritment, curing temperechur en storage kondishon. Di tin dɛn we dɛn nɔ trit nɔ fɔ tek am ɔtomɛtik wan se i de aksept ɛvri ink sistem.
Day Kɔt ɛn Slit
Bled kondishכn, kכt prεshכn, sheet matirial tεmprachכ, tiknes εn prodakshכn dairekshכn de afekt edj kwaliti. Trayal kɔt fɔ chɛk krak krak, bur, dimɛnshɔnal tolɛreshɔn ɛn sɔfayz damej.
Skɔring ɛn Fɔlding
Skɔ wid, kris dip, fɔl rayus ɛn sheet matirial dairekshɔn afɛkt fold waytin ɛn spring-bak. Tik PET nid fɔ tek tɛm tul ɛn ajɔst mashin.
Vaykum Fɔm ɛn Tɛmofɔmin
Matirial hεt, mold tεmprachכ, dro rεshכn, kol εn demolding kכndishכn de afekt fכm tiknes εn sכfayz apinεns. Di mat finish kin bi mɔ ɔ smɔl fɔ si afta yu dɔn strɛch.
Gluing ɛn Laminɛshɔn
Adhesives, tapes ɛn laminating films fɔ tɛst fɔ kɔmpitibliti wit PET ɛn di mat surface. di bond strכng, di we aw i de si εn di lכng tεm we i de ol fכ chεk bifo dεn prodyuz am bכku.
Rikɔmɛnd Sampl ɛn Kwaliti Chɛk
Tiknɛs ɛn dimɛnshɔnal tolɛreshɔn.
Matt level, surface texture, haz ɛn transparency.
Singl-sayd ɔ dabl-sayd mat apinans.
Kɔlɔ kɔnsistɛns ɛn batch-to-batch apinɛns.
Stiffness, fleksibiliti ɛn spring-bak.
Printin adhesion ɛn curing pefɔmɛns.
Die-cutting, slitting ɛn edj kwaliti.
Fɔl, skɔ ɛn kris-wayt bihayvya.
Tεrmoforming dip εn mat-sכfayz rεtεnshכn.
Adhesive, lamination ɛn protɛktiv-film kɔmpitibliti.
Dɛn nid fɔ gɛt dɔkyumentri fɔ it-kɔntakt, ilɛktrik ɔ ristrikt-sɔbstans.
Kastom Mat PET plastic sheet we dɛn mek Opshɔn dɛn
Tiknes we dɛn kɔstɔmayz frɔm 0.18 mm to 1.2 mm.
Standart sheet matirial s, kɔstɔm kɔt sheet matirial s, rol ɛn slit rol.
Mat, frosted, low-gloss ɔ kɔstɔmayz sɔfays apinans.
Singl-sayd mat, dabl-sayd mat ɔ miks sɔfays kɔnfigyushɔn.
Transparent, translucent ɛn kɔstɔmayt kɔlɔ dɛn.
Print-kompatibl surface tritmεnt, sכbjεkt to ink tεst.
Protektiv film fɔ skrach-sɛnsitiv prɔsesin.
Kastom rol wit, sheet matirial dimɛnshɔn ɛn kɔt tolɛreshɔn.
Kastamayz ɛkspɔt pak ɛn palet rikwaymɛnt.
Infɔmeshɔn we dɛn nid fɔ mek wan Mat PET Kɔt
Tik ɛn tolɛreshɔn we dɛn nid.
Shit saiz, rol wit, rol lɔng ɔ di rol wet we dɛn nid.
Singl-sayd ɔ dabl-sayd mat sɔfays.
Transparency, haze, gloss level ɛn kɔlɔ we dɛn nid.
Print, fold, day-kɔt ɔ thermoforming prɔses.
Protektiv-film ɔ surface-tritmɛnt rikwaymɛnt dɛn.
Finished prodak ɛn ɔpreshɔn ɛnvayrɔmɛnt.
Trayal kwantiti, bulk kwantiti ɛn ɛni ia dimand.
Sɛtifiket dɛn, rigyuleshɔn ɔ tɛst standad dɛn we dɛn nid.
Destineshɔn pɔt, tred tɛm ɛn di de we dɛn nid fɔ sɛn am.
Send Yu Mat PET Rikwaymɛnt dɛn
Pakɛj ɛn Delivri
Sampul pak: A4 sheet matirial s ɔ smɔl rol dɛn we dɛn pak insay bag ɛn katon we de protɛkt.
Shit pak: Na lɛk 30 kg fɔ wan paket, ɔ dɛn kɔstɔmayz am akɔdin to sheet matirial dimɛnshɔn ɛn di tin dɛn we di kɔstɔma nid.
Rol pak: Na lɛk 50 kg pan wan rol, ɔ dɛn kin kɔstɔmayt am akɔdin to di wit, tik ɛn di tin dɛn we dɛn nid fɔ mek.
Surface protection: Dɛn kin tɔk bɔt protɛktiv film, PE wrapping, kraft pepa ɔ intalay protɛkshɔn fɔ skrach-sɛnsitiv prodak dɛm.
Palet pak: Na lɛk 500-2000 kg fɔ wan plai wud palet, i dipen pan di prɔdak dimɛnshɔn ɛn di lod we dɛn nid.
Di lod fɔ kɔntena: Na lɛk 20 tan, i kin fala di pak, di dimɛnshɔn fɔ di prɔdak ɛn di wet we dɛn kin put usay fɔ go.
Dilivri tɛm: FOB, CIF ɛn EXW de.
Tipik lida tɛm: Aprɔksimatli 7-15 dez afta dipɔsit ɛn spɛsifikɛshɔn aprɔval, dipen pan kwantiti ɛn kɔstɔmayshɔn.
Faynal prodakshɔn tɛm bigin afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, sampul, pak ɛn pe tɛm. Intanɛshɔnal shiping tɛm nɔ de insay di manufakchurin lida tɛm.
![HSQY mat PET sheet matirial ɛn rol ɛkspɔt pak]()
Kwaliti ɛn Kɔmplians Kɔnsidɛreshɔn
Di dɔkyumɛnt dɛn we de kin inklud wan PET tɛknikal data sheet matirial , PET rɛsin SGS ripɔt ɛn aplikebul kwaliti-mɛnejmɛnt dɔkyumentri. Di wan dɛn we de bay fɔ kɔnfɔm us ripɔt de aplay to di ɛksaktɔl prɔdak, tik, kɔlɔ, sɔfa ɛn prodakshɔn batch.
PET nɔ fɔ ɔtomɛtik diskrayb as bayɔdegradable. Risaykul kɔmpatibiliti dipen pan di PET gred, aditiv, sɔfayz tritmɛnt, lɛbl, adeziv, finish strɔkchɔ ɛn di kɔlɛkshɔn sistɛm we de na di dɛstineshɔn makit.
Standard matte PET sheet matirial nɔ fɔ tek am ɔtomɛtik wan se i de fala dairekt fud-kɔntakt, famasitik, mɛdikal ɔ ilɛktrik-insuleshɔn rigyuleshɔn dɛn. Di we aw dɛn want fɔ yuz am ɛn di standad we dɛn fɔ yuz fɔ bi bifo dɛn ɔda.
Wetin Mek Yu Pik HSQY as Yu Matte PET Supplier?
HSQY Plastic Group de saplae PET , PVC , PP ɛn ɔda plastic sheet matirial matirial to pak kɔnvɔta, printa, tɛmɔfɔm kɔmni, steshɔnari manifakta, distribyushɔn ɛn industrial bayer.
Mat PET sheet matirial s ɛn rol frɔm 0.18 mm to 1.2 mm.
Kastamayz sheet matirial saiz ɛn rol wit.
Single-sayd ɛn dabl-sayd mat opshɔn dɛn.
Printin, foldin ɛn thermoforming sampul sɔpɔt.
Protektiv-film ɛn kɔstɔm pak opshɔn dɛn.
PET teknikol data ɛn SGS dɔkyumentri we de.
Bulk-ɔda prodakshɔn ɛn ɛkspɔt-pak sɔpɔt.
FOB, CIF ɛn EXW kot opshɔn dɛn.
Sɔpɔt fɔ distribyushɔn, kɔnvɔta ɛn OEM prɔjek dɛn.
Bifo bulk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di matirial we yu dɔn pik wit di bayer in aktual printin ink, day-katin tul, skɔring sistem, fɔm mold, adeziv ɛn prodakshɔn ikwipmɛnt.
![HSQY Plastic Group intanashɔnal ɛgzibishin ɛn kastoma mitin dɛn]()
Kontakt HSQY fɔ Sampul ɛn Prayz
Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt Mat PET Film ɛn Shit
Wetin na mat PET fim?
Mat PET film na poliɛsta matirial we gɛt lɔw-glos ɔ tɛkstɔr sɔfays. dipכnt pan di tik, dεn kin saplae am as fleksibul film, sεmi-rigid sheet matirial כ rigid sheet matirial .
Dis prodakt na tin BOPET film ɔ na tik PET sheet matirial ?
Dis HSQY prodakt na fכs tik-gεj PET sheet matirial כ rol wit tik rεnj 0.18 mm to 1.2 mm. Tin BOPET film dεm nכmal wan dεn spεsifiket insay maykron εn dεn de yuz dεm fכ difrεn kכnvכlt prכsεs dεm.
Wetin na di difrɛns bitwin mat PET ɛn glos PET ?
Mat PET gɛt lɔw-glos tɛkstɔr sɔfays we de ridyus riflɛkshɔn. Glossy PET gɛt wan smol polish sɔfays we de gi klia dairekt visibiliti ɛn strɔng riflɛkɛt aylayt.
Na mat PET transparent?
I kin bi transparent ɔ translucent, bɔt di mat tɛkstɔr de difyuz di view. Transparency dipen pan tik, haz, surface roughness ɛn layt kɔndishɔn.
Matte PET na anti-glare film?
di mat surface kin ridyus visible glare kompare wit glossy PET . I nɔ fɔ trit am ɔtomɛtik wan lɛk sɛtifiket optik anti-glɛya prodak pas dɛn dɔn tɛst spɛshal glos, haz ɔ optik valyu dɛn.
Di mat surface de na wan say ɔ ɔl tu di say dɛn?
Wi kin tɔk bɔt singl-sayd ɛn dabl-sayd mat kɔnfigyushɔn dɛn. Di sɔfayz strɔkchɔ we dɛn nid fɔ tɔk bɔt we dɛn de aks fɔ kot ɔ sampul.
Us tik tik dɛn de?
HSQY de saplae tiknes frɔm 0.18 mm to 1.2 mm. Customized tiknes avaylabl ɛn tolerances fɔ kɔnfɔm bifo dɛn ɔda.
Us sheet matirial saiz dɛn de?
Standart saiz dɛn inklud 610 × 610 mm, 700 × 1000 mm, 915 × 1220 mm, 915 × 1830 mm ɛn 1220 × 2440 mm. Dɛn kin mek kɔstɔm saiz dɛn bak.
Us rol wit dɛn de?
Rol wit frɔm 110 mm to 1280 mm de, we de ɔnda tik, slitin tolɛreshɔn ɛn prodakshɔn rikwaymɛnt.
Yu kin print mat PET sheet matirial ?
Di gred dɛn we fit kin sɔpɔt skrin, UV ɔ ɔfset printin. Surface tritmεnt, ink adheshon, curing tεmprachכ εn fold rεsistεns fכ tεst bifo mas prodakshכn.
Yu tink se matte PET nid korona tritmɛnt fɔ print?
Di tritmɛnt we dɛn nid de dipen pan di ink, di we aw dɛn de print ɛn PET sɔfa. Di wan dɛn we de bay fɔ gi di we aw dɛn de print so dat dɛn go ebul fɔ ebul fɔ no di rayt tin we dɛn dɔn trit ɔ we go gri wit di printin.
Yu kin fold mat PET sheet matirial ?
Yɛs, dɛn kin skor ɛn fold di tik dɛn we fit. Matirial dairekshɔn, kris dip, fɔlding rayus ɛn tiknɛs de afɛkt waytin, krak ɛn spring-bak.
Yu tink se mat PET sheet matirial kin thermoformed?
Di rayt gred dɛn kin bi vaykum fɔm ɔ thermoformed. Hεt εn strεch kin chenj di mat finish, haz εn di wכl tik, so fכm trial dεm nid fכ.
Yu tink se dɛn kin ad fim we de protɛkt pɔsin?
Dɛn kin tɔk bɔt protɛktiv fim fɔ spɛsifikɛshɔn dɛn we nid ɔda skrach protɛkshɔn we dɛn de print, kɔt, fɔm, transpɔt ɔ asɛmbli.
Mat PET fayn fɔ pak it?
Suitabiliti dipen pan di ekzak PET gred, aditiv, sɔfa tritmɛnt, di kayn it, kɔntakt kɔndishɔn ɛn di dɛstineshɔn-maket rigyuleshɔn. Di tin dɛn we dɛn nid fɔ kɔntakt fɔ it bifo yu ɔda.
Yu tink se mat PET kin biyodegradabl?
Standard PET nɔ fɔ nɔmal fɔ diskrayb am as bayɔdigradabl. Di pɔsibul fɔ risaykul dipen pan di matirial strɔkchɔ, aditiv, kɔntaminɛshɔn ɛn lokal kɔlɛkshɔn ɛn risaykul sistɛm.
Yu kin yuz mat PET fɔ ilɛktrik insuleshɔn?
Dɛn kin yuz PET gred dɛn we dɛn dɔn pik na insuleshɔn aplikeshɔn, bɔt dɛn fɔ kɔnfyus ilɛktrik prɔpati dɛn bay we dɛn yuz di tik we dɛn nid, di we aw dɛn de tɛst ɛn di tɛmpracha fɔ di savis.
Aw fɔ klin mat PET sheet matirial ?
Yuz saf klos wit wata ɔ wan mild nyutral klin. Nɔ yuz abrasive pad ɔ strɔng kemikal pas dɛn dɔn tɛst di kɔmpatibiliti.
Wetin na di minimum ɔda kwantiti?
Di standad minim oda kwantiti na 1000 kg. Speshal kɔlɔ, unusual wit, surface tritmɛnt ɔ kɔstɔm fɔmyulashɔn kin nid difrɛn MOQ.
Yu tink se sampul dɛn de?
Yɛs. A4 sheet matirial s ɔ limited-sayz sɛmpul dɛn kin gi fɔ evaluate tik, mat apinans, printin, fold ɛn fɔm pefɔmɛns. Nɔmal wan dɛn kin gɛda freyt.
Wetin na di prodakshɔn lida tɛm?
Tipik prodakshɔn tɛm na lɛk 7-15 dez afta dɛn dɔn kɔnfyus di dipɔsit, spɛsifikɛshɔn ɛn sampul rikwaymɛnt dɛn.
Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?
Gi di tik, dimɛnshɔn, rol wit, mat sayd, transparency, kɔlɔ, kwantiti, printin ɔ fɔm we, protɛktiv-film rikwaymɛnt, dɛstineshɔn ɛn aplikebul kɔmplians standad.
Gɛt wan Kastɔm Mat PET Kɔt
