HSQY Mat PET Film 50–400 μm fɔ Print

Mat PET Film 50–400 μm fɔ Print ɛn Pakɛj

HSQY Matte PET Film na wan low-gloss polyethylene terephthalate matirial we dɛn de saplae insay lɛk 50–400 μm gej fɔ print, fɔl bɔks, steshɔnari, binding kɔva, pak winda, day kɔt ɛn ɔda kɔnvɔyt aplikeshɔn dɛn.

Di mat sɔfays de ridyus strɔng riflɛkshɔn dɛn we yu kɔmpia am wit kɔvɛnshɔnal glos PET ɛn i de gi wan saf, mɔ rifin apinans fɔ print pak, kɔva ɛn displei kɔmpɔnɛnt dɛn. Dipen pan di gred we yu dɔn pik, dɛn kin gi di matirial insay rol ɔ kɔt sheet matirial s wit kɔstɔmayz wit ɛn dimɛnshɔn.

Dis prodakt de okyupay difrεnt gej rεnj frכm kכvεshכnal tin mat BOPET fleksibul film. I pablish tiknes rεnj we na 50–400 μm (0.05–0.4 mm) de mek i fayn fכ print εn kכnvכlt projεkt dεm we nid mכr bכdi εn stiffness pas vεri tin fleksibul polyεsta film.

Printin adheshon, mat levul, haz, transparency, folding pefomans en fom suitability de difrεnt wit tiknes, surface tritmεnt εn prodakshכn gred. Di wan dɛn we de bay fɔ spɛsifa di dawtstrim prɔses ɛn apruv ripɔtmɛnt sɛmpul dɛn bifo bɔku bɔku prodakshɔn.

Prodakt Halayt: 50–400 μm Mat PET | Low-Gloss Surface we nɔ gɛt bɛtɛ glos | Printin we dɛn de print | Bɔks dɛn we dɛn kin fol | Steshɔnari tin dɛn | Binding Kɔva dɛn | Die Cutting | Pakɛj Window | Rol & Sheet Supply fɔ di wan dɛn we de wok | Kastom Widths & Sayz dɛn

Rikwest Matte PET Sampul ɛn Bɔlk Prayz

Matte PET Fim Vidio

Matte PET Fim Imej dɛn

Matte PET Film Spɛsifikeshɔn dɛn

Di spesifikeshɔn dɛn we de dɔŋ ya de sɔma di infɔmeshɔn we dɛn dɔn pablish fɔ dis prɔdak. Eksakt tiknes tolerans, rol wit, mat apinans, surface tritmɛnt, rol kɔnfigyushɔn ɛn funkshɔn prɔpati dɛn fɔ kɔnfɔm insay di kɔrɛnt prodakshɔn spɛsifikɛshɔn.

Tiknes Notis: di 50–400 μm prodakt rεnj de kכba mεtirial dεm wit signifyant difrεnt fleksibiliti εn stiffnεs. 50 μm film nכ fכ εkspεkt fכ bihayv di sem we lεk 400 μm sεmi-rigid PET sheet matirial . Spɛsifik di prɔses we yu want fɔ du we yu de pik di gej.

Rikwest Kɔrɛnt Mat PET Spɛsifikeshɔn dɛn

Matte PET Teknik ɛn Tɛst Dɔkyumɛnt dɛn

Dɛn kip di dɔkyumɛnt dɛn we de dɔŋ ya fɔ mek dɛn go ebul fɔ rivyu di tin dɛn we dɛn de yuz fɔs. Di wan dɛn we de bay fɔ kɔmɛshɔn fɔ aks fɔ di kɔrɛnt dɔkyumɛnt dɛn we dɛn kin yuz fɔ di ɛksaktɔl PET gred, tiknɛs, sɔfa tritmɛnt ɛn di aplikeshɔn we dɛn want fɔ yuz.

Wetin Na Matt PET Film?

Mat PET film na poliɛsta matirial wit lɔw-glos, frɔst ɔ tɛkstɔr sɔfays we dɛn mek fɔ ridyus strɔng riflɛkshɔn we yu kɔmpia am wit kɔvɛnshɔnal glos PET .

di mat apinans kin kriyayt tru surface tεkschur, spεshal PET fכmyuleshכn, kכt, tritmεnt כ כda prodakshכn mεtכd. Difrɛn we dɛn fɔ mek tin dɛn kin mek difrɛn glos, haz, transparency, roughness ɛn printing characteristics.

Fɔ printin ɛn pak projɛkt, di impɔtant sɛlɛkshɔn krayteria nɔto jɔs tik ɛn wit bɔt bak di mat lɛvɛl we dɛn nid, printin sayd, sɔfayz tritmɛnt, ink sistɛm ɛn daunstrim kɔnvɔtin prɔses.

50–400 μm Mat PET vs. Tin Mat BOPET film

Matte PET Film fɔ Print

Mat PET na tin we dɛn kin pik fɔ print pak, kɔva ɛn prɔmoshɔnal kɔmpɔnɛnt usay dɛn kin lɛk fɔ yuz lɔw riflɛkshɔn sɔfays pas ay-glos finish.

Di mat tɛkstɔr kin inflɔws ink wet ɛn adheshon, so di aktual prodakshɔn ink ɛn printin prɔses fɔ tɛst pan di PET sɔfays we dɛn dɔn pik.

Fɔ Print na Skrin

Suitabl mat PET gred dɛn kin skrin print yuz PET -kɔmpatibl ink dɛn. Evaluate ink adhesion, opacity, curing, fleksibiliti ɛn rɔb rɛsistɛns bifo prodakshɔn aprɔval.

UV Printing we dɛn de print

Fɔ UV printin, tɛst sɔfays wet, ink adheshon, curing, kala density, blok ɛn daunstrim fɔlding ɔ day kɔt yuz di aktual prodakshɔn sistɛm.

Ɔfset Printin we yu de print

Dɛn kin evalyu PET gred dɛn we dɛn dɔn pik fɔ ɔfset printin. Kɔmpatibiliti dipen pan matirial gej, sɔfayz tritmɛnt, ink kemistri, fidin kɔndishɔn ɛn di kɔrɛkt prɔses.

Korona ɔ Kwɛmyuɛl Tritmɛnt

Printing-compatible surface treatment kin improve adhesion fɔ sɔm ink ɛn kɔtin sistem dɛn. Korona tritmɛnt nɔ nid fɔ de ɔtomɛtik fɔ ɛvri aplikeshɔn, so sho di rial printin prɔses ɛn ink sistɛm we yu de aks fɔ kot.

Singl-Said vs. Dabl-Said Mat PET

Ki Ficha dɛn fɔ Mat PET Film

Low-Gloss Surface we nɔ gɛt bɛtɛ glos

Di mat finish de ridyus strכng riflεkshכn dεm εn de gi wan sכft vishכnal apinεns pas polish klia PET .

Transparency we dɛn de kɔntrol

Dipen pan di mat tɛkstɔr ɛn gej, di matirial kin gi transparent ɔ translucent apinans we i de difyuz riflɛkt layt. Baya dɛn wit optik rikwaymɛnt fɔ spɛsifa akseptabl haz ɛn transparency ɔ apruv wan rɛfrɛns sampul.

Dimɛnshɔnal Stebiliti

PET de gi yusful dimɛnshɔnal stebiliti fɔ print, day kɔt, fɔ fold ɛn kɔnvɔyt plastic prodak.

Mekanikal Strɔng

Di polyester strɔkchɔ de gi prɛktikal tɛnsiɛl ɛn handel pefɔmɛns. di akchual stiffnεs εn mεkanikal bihayv de difrεn bכku bכku wan akraos di 50–400 μm gej rεnj.

Mɔstɔ Resistɛns

PET gɛt lɔw mɔstɔ absɔpshɔn ɛn dɛn kin yuz am fɔ bɔku pak ɛn steshɔnari aplikeshɔn dɛn. Finished-product suitability fɔ stil tɛst ɔnda di aktual humidity ɛn stɔrɔj ​​kɔndishɔn.

Kεmikכl Resistεns

PET de gi rεsistεns to plεnti kכmכn sכbstans dεm, bכt kכmpatibiliti wit sכlvεnt, klin, adeziv, כyl כ prכsεs kεmikכl dεm fכ tεst כnda di aktual kכnsantreshכn, tεmprachכ εn kכntakt tεm.

Risaykul PET Matirial

PET na risaykul tɛmplastik usay fayn fɔ kɔlekt ɛn risaykul infrastukchɔ de. Konvεnshal PET nכ fכ dεskrεb as nכmal bayodεgradabl כnda nכmal dispכzכn kכndishכn.

Aplikeshɔn dɛn fɔ Mat PET Film

Di Pakɛj we dɛn Print

Mat PET kin gi wan lɔw-riflɛkshɔn sɔfa fɔ print pak kɔmpɔnɛnt usay dɛn kin lɛk fɔ luk we soft, prɛmiɔm.

Bɔks dɛn we dɛn kin fol

Suitabl tik gej dɛn kin day kɔt, skor ɛn fold insay transparent ɔ translucent rital pak. Kris dizayn fɔ tɛst fɔ kɔntrol strɛs waytin, krak krak ɛn spring-bak.

Kɔva dɛn we dɛn kin tay

Matte PET fayn fɔ dɔkyumɛnt kɔva, notbuk kɔva, ripɔt kɔva, mɛnyu, fɔlda ɛn ɔda steshɔnari prɔdak dɛn we nid fɔ gɛt plastic sɔfays we nɔ gɛt bɔku layt.

Steshɔn ɛn Ɔfis Prodakt dɛn

Aplikeshɔn dɛn kin inklud divayda, fɔlda, protɛktiv kɔva, prɛzɛnt sheet matirial s ɛn ɔda print ɔ day-kat steshɔnari kɔmpɔnɛnt dɛn.

Fɔ pak di Windows

Transparent ɔ translucent mat PET kin yuz as katon winda usay dɛn nid fɔ ridyus di glare ɛn wan difrɛn sɔfays apinans.

Aw fɔ Pak di klos dɛn

Yu kin yuz fayn gej fɔ pak di shirt, fɔ kɔva fɔ wɛr klos ɛn fɔ mek tin dɛn fɔ pak klia ɔ translucent.

Vaykum Fɔm ɛn Tɛmofɔmin

Sεlektεd gej dεm εn PET strכkchכ dεm kin evaluate fכ shalo vεkyum fכm כ tεmכfכm. Nɔto ɛvri 50–400 μm gred ikwal fayn fɔ fɔm, so di wan dɛn we de bay fɔ gi mold jɔyometri, drɔ dip, ɔt kɔndishɔn ɛn di say we dɛn want fɔ luk bifo dɛn pik di matirial.

Matte PET Aplikeshɔn Imej dɛn

Aw fɔ Sɛlekt 50–400 μm Mat PET Film

Tiknes: Spɛsifik di ɛksaktɔ gej ɛn tolɛreshɔn we dɛn nid fɔ print, fold, stiffness, handel ɛn dɔŋstrim kɔnvɔyt.

Rol wit: Gi di wɛb wit we yu nid ɛn slit tolɛreshɔn akɔdin to di printin ɔ kɔnvɔyt mashin.

Shit saiz: Fɔ sheet matirial -fed prɔsesin, gi finish dimɛnshɔn ɛn kɔt tolɛreshɔn.

Mat apinans: Spɛsifik fayn mat, kɔs mat, frɔst ɔ ɔda apruv vijual rɛfrɛns.

Mat sayd: Kɔnfɛm if wan sayd ɔ ɔl tu di sayd dɛn nid di mat finish.

Transparency: Stet if di finish prodak fɔ de transparent, translucent ɔ mɔ difyuz.

Di we aw dɛn de print: Sho di skrin, UV, ɔfset ɔ ɔda printin sistem ɛn gi di kayn ink usay i pɔsibul.

Surface treatment: Stet if korona tritmɛnt, kemikal tritmɛnt ɔ ɔda printin-kɔmpatibl sɔfays nid fɔ de.

Downstream process: Identify die cutting, folding, scoring, lamination, gluing, thermal transfer, vaykum fɔm ɔ ɔda kɔnvɔyt ɔpreshɔn.

Rol konfigyushɔn: Fɔ rol matirial, gi rikwayd kɔr dayamita, maksimal rol ɔdasay dayamita, rol lɔng ɔ wet ɛn wayndin dairekshɔn.

Surface protection: Stet if protektiv film, intalif ɔ ɔda protɛkshɔn nid fɔ de we dɛn de transpɔt ɛn kɔnvɔyt.

Dokumɛnt: Gi ɛnitin we dɛn nid fɔ du fɔ gɛt tin fɔ it, fɔ ristrikt-sɔbstans ɔ fɔ de na di say we dɛn want fɔ go bifo dɛn gri fɔ mek dɛn mek am.

Send Yu Mat PET Film Rikwaymɛnt dɛn

Aw fɔ Validɛt Mat PET Bifo Bɔlk Prodakshɔn

Apruv di Mat Apiyans

Inspek mat yunifom, glos, haz, transparency, kala ɛn sɔfays tɛkstɔr ɔnda kɔnsistɛns layt. We di apinɛns impɔtant, apruv wan fizik rɛfrɛns sampul bifo bɔku bɔku prodakshɔn.

Test Ink Adheshon we yu go gɛt

Print di aktual prodakshɔn ink pan di PET sɔfays we yu dɔn pik ɛn evaluate adhesion afta di intended drying or curing process.

Chek di Kɔlɔ Densiti

Mat tɛkstɔr kin inflɔws di kɔlɔ we i tan, di ink kɔvarej ɛn kɔntrast. Evaluate di aktual print artwork pas fɔ abop pan matirial samples nɔmɔ we yu nɔ print.

Test Rub Resistans fɔ yu

Evaluate di print surface afta yu dɔn handle, stak ɛn rɔb. If yu nid fɔ gɛt ay abrashɔn rɛsistɛns, difayn di ink, kɔtin ɔ protɛktiv-film sistɛm akɔdin to dat.

Rɔn Day-Kɔt ɛn Fɔl Trayal

Yuz di aktual prodakshɔn tul fɔ evaluate edj kwaliti, dimɛnshɔnal akkuracy, krak, kris kwaliti, fold waytin ɛn spring-bak.

Test Lamineshɔn ɔ Adhesive Bonding

Fɔ laminated ɔ glued prodak, tɛst di adhesive, tep ɔ laminate we yu dɔn pik pan di aktual PET surface. Mat tɛkstɔr ɛn sɔfayz tritmɛnt kin afɛkt ifɛktiv bond eria ɛn adheshon.

Validate Fɔm Usay dɛn nid am

If di gej we yu dɔn pik go bi vaykum fɔm ɔ thermoformed, tɛst di aktual mold ɛn asɛs di strɛch, di surface appearance, whitening, wall distribution ɛn ritɛnshɔn fɔ di mat finish.

Fɔd-Kɔntakt ɛn Sastaynabiliti Kɔnsidɛreshɔn

Usay mat PET na fɔ dairekt fud-kɔntakt pak, di wan dɛn we de bay fɔ aks fɔ kɔrɛnt prodak-spɛsifi k dɔkyumentri we kɔba di ɛksaktɔ PET rɛsin, mat tritmɛnt, aditiv, it tayp, kɔntakt tɛmpracha, kɔntakt durayshɔn ɛn dɛstineshɔn makɛt.

Dɛn fɔ rivyu wan SGS tɛst ripɔt akɔdin to di rayt tin we dɛn tɛst, di ripɔt skɔp ɛn di de we dɛn gi am. ISO 9001 na kwaliti-mɛnejmɛnt-sistim standad ɛn dɛn nɔ fɔ intaprit am as it-kɔntakt aprɔval fɔ wan patikyula fim.

PET na risaykul usay fayn kɔlɛkshɔn ɛn risaykul sistɛm dɛn de. Di risaykulbiliti fɔ di tin we dɔn dɔn kin afɛkt bay ink, kɔtin, adeziv, laminat, kɔlɔ ɛn ɔda tin dɛn we dɛn dɔn chenj.

Matte PET Film Pak ɛn Delivri

Sampul Pak: Infɔmeshɔn rɛfrɛns dɛn we dɛn dɔn pablish A4-sayz sɛmpul dɛn we dɛn pak insay PP bag ɔ katon. Kɔnfɛm di sampul saiz ɛn freyt arenjmɛnt bifo yu ship am.

Shit Pak: Di ol infɔmeshɔn we dɛn dɔn pablish de rɛfrɛns lɛk 30 kg pan wan bag fɔ sɔm spɛsifikɛshɔn, we dɛn protɛkt wit PE film ɔ kraft pepa. Aktual pak dipen pan tik ɛn dimɛnshɔn.

Rol Pakin: Fɔ rol saplai, di wan dɛn we de bay fɔ difayn di kɔr dayamita, di rol wit, di dayamita we de na do, di rol lɔng ɔ wet, di say we dɛn de waynd ɛn di rap we de protɛkt am.

Palet Palet: Olda infכmeshכn we dεn pכblish rεfrεns lεk 500–2000 kg pan wan plai wud palet. Di lod we de naw fɔ kɔnfyus akɔdin to di prodak fɔmat ɛn transpɔt limiteshɔn.

Kɔntinɛnt Lod: Di ol infɔmeshɔn we dɛn dɔn pablish de rɛfrɛns lɛk 20 tan fɔ sɔm shipmɛnt dɛn. Aktual lod dipen pan prodak dimɛnshɔn, palet kɔnfigyushɔn, kɔntena tayp ɛn aplikebul wet ristrikshɔn.

Dilivri Tɛm: Di kɔmɛshɔn opshɔn dɛn we dɛn dɔn pablish inklud EXW, FOB, CNF ɛn DDU. Kɔnfɛm di tɛm dɛn we de wit di kot we de naw.

Lid Taym: Infɔmeshɔn we dɛn dɔn pablish de rɛfrɛns lɛk 7–15 dez fɔ sɔm ɔda dɛn. Aktual prodakshɔn tɛm dipen pan gej, wit, sɔfa tritmɛnt, kwantiti ɛn prodakshɔn schedule.

Rikwest di Kɔrɛnt Pak ɛn Shipin Ditiɛl dɛn

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Matte PET Film

Wetin na mat PET fim?

Mat PET film na polyethylene terephthalate matirial wit low-glos, frosted ɔ textured surface we de ridyus strɔng riflekshɔn we yu kɔmpia am wit kɔvɛnshɔnal glossy PET .

Us tik tik dɛn de?

dis prodakt pej de pכblish lεk 50–400 μm, we ikwal to 0.05–0.4 mm. Kɔnfɛm di rayt gej we de ɛn di tolɛreshɔn bifo yu ɔda.

50–400 μm mat PET di sem wit mat BOPET ?

Nɔto fɔ se na so i bi. Kɔnvɛnshɔnal mat BOPET na biakshal ɔriɛnted fleksibul polyɛsta fim we dɛn kin kɔmɔn fɔ gi insay tin gej dɛn. dis 50–400 μm prodakt rεnj de εkstendi insay tik εn mכr sεmi-rigid PET aplikεshכn dεm, so di εksakεt prodakshכn strכkchכ fכ kכnfכm.

Us rol wit dɛn de?

di ditayl prodakt infכmeshכn de pכblish rol wit frכm lεk 110 mm to 1280 mm. Kɔnfɔm wit tolɛreshɔn, kɔr saiz, rol dayamita ɛn rol wet fɔ yu mashin.

Yu tink se dɛn kin print mat PET fim na skrin?

Yes, dɛn kin print di rayt mat PET gred dɛn na skrin. Yuz PET -kompatibl ink ɛn tɛst adheshon, curing, kala density ɛn rub resistance pan di sɛlɛkɛt sɔfays.

Yu tink se dɛn kin print mat PET fim wit UV?

Dɛn kin ebul fɔ evalyu di rayt gred dɛn fɔ UV printin. Kɔnfɛm sɔfayz tritmɛnt ɛn tɛst ink adheshon, kɔrɛkt, blɔk ɛn dɔŋstrim fɔl ɔ kɔt.

Yu tink se dɛn kin ɔfset print mat PET fim?

Dɛn kin evalyu PET sɔfays dɛn we dɛn dɔn pik fɔ ɔfset printin. Kɔmpatibiliti dipen pan di gej, ink kemistri, sɔfayz tritmɛnt ɛn di kɔring sistɛm.

Matte PET nid korona tritment?

Nɔto ɛvri aplikeshɔn nid fɔ gɛt korona tritmɛnt. Spɛsifik di printin ink, kɔtin, lamineshɔn ɔ adhesive sistem so dat dɛn go ebul fɔ evaluate di kɔrɛkt sɔfa tritmɛnt.

Yu tink se matte PET film kin day kot?

Yɛs. Dɛn kin kɔt di rayt gej dɛn fɔ kɔva, steshɔnari, pak winda, fɔl bɔks ɛn ɔda tin dɛn we dɛn dɔn chenj. Tulin fɔ bi optimiz fɔ di tik we yu dɔn pik.

Yu kin fold mat PET ?

Dɛn kin skor ɛn fold fayn fayn sɛmi-rigid gej dɛn. Test di aktual kris dizayn fɔ kɔntrol waytin, krak ɛn spring-bak.

Yu tink se mat PET film kin thermoformed?

di gej dεm we dεn sεlekt εn PET strכkchכ dεm kin fayn fכ vεkyum fכm כ tεmכfכm, bכt fכm pεrformεns nכ fכ asum akraos di כl 50–400 μm rεnj. Test di aktual gej ɛn mold bifo bɔku bɔku prodakshɔn.

Yu tink se wan say kin bi mat ɛn di ɔda say kin smol?

Dɛn kin tɔk bɔt singl-sayd mat ɔ mat/smɔl sɔfays kɔmbaynshɔn dɛn dipen pan di prodakshɔn fisibiliti ɛn daunstrim printin ɔ kɔnvɔyt rikwaymɛnt dɛn.

Yu tink se dabl-sayd mat PET de?

Dɛn kin tɔk bɔt dabl-sayd mat kɔnfigyushɔn fɔ prɔdak dɛn we nid fɔ gɛt lɔw-glos apinans pan ɔl tu di sɔfays dɛn.

Na mat PET film biodegradable?

Konvεnshal PET nכ nכmal bayodεgradabl כnda standad dispכzכn kכndishכn. PET na risaykul tɛmplastik usay di rayt kɔlɛkshɔn ɛn risaykul sistɛm dɛn de.

Yu kin yuz mat PET fɔ pak it?

Dɛn kin ebul fɔ evalyu di gred dɛn we dɛn dɔn pik fɔ di it we dɛn pak we dɛn dɔn kɔnfyus di ɛksaktɔl PET rɛsin, mat tritmɛnt, aditiv ɛn di kɔrɛnt it-kɔntakt dɔkyumentri fɔ di kɔndishɔn dɛn we dɛn bin want ɛn di makɛt we dɛn want fɔ go.

SGS ripɔt min se dɛn dɔn gri fɔ di fim fɔ ɛvri aplikeshɔn?

Nɔ, SGS ripɔt de aplay to di patikyula matirial ɛn tɛst skɔp we dɛn tɔk bɔt na da ripɔt de. Di wan dɛn we de bay fɔ luk di ripɔt we de naw fɔ di rayt prɔdak we dɛn de bay.

Wetin na di MOQ?

Di infɔmeshɔn we dɛn dɔn pablish na dis prɔdak pej gɛt difrɛn MOQ valyu dɛn naw. Kɔnfɛm di aplikebul minim kwantiti ɛn yunit fɔ di gej, wit ɛn sɔfayz tritmɛnt we dɛn nid we yu de aks fɔ kot.

A kin aks fɔ sampul dɛn?

Yɛs. Sampl matirial kin bi diskכs fכ chεk mat apiyans, printin, foldin, day kכt, lamination εn כda dכwnstrim prכsεs dεm. Kɔnfɛm di dimɛnshɔn dɛn we de ɛn di freyt tɛm dɛn wit HSQY.

Wetin a fɔ tɛst bifo a ɔda bɔku bɔku wan?

Chek tiknes, dimɛnshɔn, mat yunifɔmiti, haz, transparency, ink adheshon, curing, rub resistance, folding, die cutting, lamination ɛn fɔm pefɔmɛns usay i apɔynt.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi tik ɛn tolɛreshɔn, rol wit ɔ sheet matirial saiz, mat sɔfays rikwaymɛnt, singl-sayd ɔ dabl-sayd mat, transparency ɔ kɔlɔ, printin prɔses, sɔfa tritmɛnt, dawtstrim kɔnvɔyt prɔses, rol kɔnfigyushɔn, kwantiti, dɛstineshɔn ɛn di dɔkyumentri we dɛn nid.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae mat PET film, mat PET sheet matirial , APET , RPET , BOPET ɛn ɔda polyɛsta matirial to printa, pak kɔnvɔta, steshɔnari manifakta, tɛmɔfɔmin kɔmni, distribyushɔn ɛn intanashɔnal kɔmɛshɔnal bayer.

Baya dɛn kin tɔk bɔt kɔstɔmayz tik, rol wit, kɔt- sheet matirial saiz, mat sɔfa, sɔfa tritmɛnt, kɔlɔ, sɛmpul, rol kɔnfigyushɔn, pak ɛn bɔlk saplai akɔdin to di kɔnvɔyt prɔses we dɛn bin want.

HSQY na Indastri Ɛgzibishin dɛn

Rikwest fɔ kot di prayz fɔ Mat PET Fim

Yu de luk fɔ 50–400 μm mat PET fɔ print, fɔ fold bɔks, steshɔnari, binding kɔva, pak winda ɔ fɔ kɔnvɔyt? Send HSQY yu tiknes we yu nid, wit, mat apinans, surface tritmɛnt, printin prɔses, kɔnvɔyt rikwaymɛnt, kwantiti ɛn ples fɔ go.

Kontakt HSQY fɔ Sampul ɛn Bɔlk Prayz