Matte Pet Film Pet Mate Film Matt Polyester Film

Matte PET Filimu ni sɛbɛnw dilanni wideyow

Aw ye wideyo lajɛ min bɛ duguma walasa ka kunnafoni caman sɔrɔ HSQY matte PET filimu ni sɛbɛnfura min bɛ kɛ fɛnw kan minnu bɛ kɛ ka sɛbɛnni kɛ, ka kɛsu foli, sɛbɛnnikɛlanw, vacuum forming, thermoforming ani industrial converting applications.

Matte PET Filimu ni sɛbɛnfura ye mun ye?

Mate PET filimu ni sɛbɛnfura min bɛ kɛ ye poliyesitɛri fɛnw ye minnu ɲɛ ka dɔgɔn, minnu bɛ kɛ nɛnɛ ye walima minnu bɛ kɛ ni fɛn finmanw ye. Ni i y’a suma ni glossy transparent PET ye, a ɲɛda matte bɛ dɔ bɔ yeelen yelenw na, ka ɲɛda cogoya nɔgɔya ani a bɛ se ka bolokɔnincininw walima minɛcogo taamasiɲɛ misɛnninw kɛ fɛn ye min tɛ ye kosɛbɛ.

HSQY bɛ fɛn dɔw dilan minnu bɛ se ka kɛ PET ye sɛbɛnfura min bɛ kɛ ani roll cogo la, minnu janya bɛ daminɛ milimɛtɛrɛ 0,18 na ka se milimɛtɛrɛ 1,2 ma. Nin fɛn suguya in dabɔra fɔlɔ sɛbɛnni, kɛsu foli, sirili datugulanw, sɛbɛnnikɛlanw, jiralanw, vacuum forming ani thermoforming sanni ka kɛ ultrathin flexible-packaging film baarakɛcogo ye.

Fɛn min bɛ se ka kɛ ka kɛɲɛ ni a bonya ye, sɛbɛnfura min bɛ kɛ bonya, a kurukuru bonya, a ɲɛda cogoya, a jɛlen, a kulɛri ani a foroko kɛcogo. Sɛbɛnni furakɛli, lakanani filimu ani baarakɛcogo wɛrɛw ka kan ka dafa ka kɛɲɛ ni a kɛcogo laban ye.

Mati hakɛ, sisi, kɛnɛya, gɛlɛya ani foroko kɛcogo bɛ se ka ɲɔgɔn ta ka kɛɲɛ ni a dilanni ni a dilanni taabolo ye. Sannikɛlaw ka kan ka sɔn farikolo tacogo dɔ ma sani a ka kɛ jamaba la ni yecogo fini walima fɛn caman tigɛli baara nafa ka bon kosɛbɛ.

PET Kunnafoni-sɛbɛn telesarse        Télécharger PET Resin SGS Rapport    

Demand Matte PET Sɔngɔko    PET Misali dɔ ɲini

Matte PET plastiki sɛbɛnfura Fɛn dilannenw ja

Matte PET Filimu ni sɛbɛnw ɲɛfɔli

Muɲuli laban muɲuni, a hakɛ muɲuni, nivo matte, sisi, kɛnɛya ani baarakɛcogo kɛcogo ka kan ka dafa ni misali walima sanniko ɲɛfɔli ye min dabɔra.

Fɛn minnu ka kan ka kɛ dumuniko la, kuran sɔgɔli, furakɛli kɛcogo, funteni kunbɛnni, tasuma baarakɛcogo, antistatique nafa walima kemikali dantigɛli kɛrɛnkɛrɛnnenw, olu ka kan ka fɔ sani u ka dilan.

Nafa jɔnjɔn minnu bɛ sɔrɔ Matte PET plastiki sɛbɛnfura la.

Low-Gloss Matte Yecogo

Matte surface bɛ dɔ bɔ reflections yetaw la ani ka yecogo dɔ dilan min ka nɔgɔn, min tɛ dɔgɔya ka tɛmɛ PET glossy kan. O b’a to o fɛn bɛ bɛn pake ɲumanw ma, sɛbɛnnikɛlanw, datugulan sɛbɛnnenw ani jiralanw.

Dimensionnel Stability ɲuman

PET bɛ gɛlɛya waleyali ni hakɛ sabatili di walasa ka plastiki yɔrɔw tigɛ, ka sɛbɛnni kɛ, ka u da ani ka u dilan. Baara kɛcogo bɛ bɔ a janya la, a dilanni siratigɛ la, a funteni ani a jiginni cogoyaw la.

Dɔgɔyara bolokɔnincininw yecogo la

Bolociyɛnw, minɛcogo taamasiɲɛ misɛnninw ani yɔrɔ dafabaliya misɛnninw, a ka c’a la, olu tɛ ye kosɛbɛ yɔrɔ la min bɛ wele ko texture matte surface ka tɛmɛ transparent transparent kan min polisilen don kosɛbɛ PET .

Sɛbɛnni ni finiko sugandiliw

PET yɔrɔ minnu labɛnna ka ɲɛ, olu bɛ se ka dɛmɛ don ɛkran sɛbɛnni na, UV sɛbɛnni, offset sɛbɛnni, papiye masirili, labeli ani ja kɛcogo wɛrɛw. Enki nɔrɔli ka kan ka sɛgɛsɛgɛ ni yɔrɔ sugandilen ye ani furakɛlicogo.

Die-Cutting ani Folding baarakɛcogo

PET kalasi bɛnnenw bɛ se ka tigɛ, ka jate kɛ ani ka da pakew finɛtiriw kɔnɔ, datugulanw, bolokɔniw, tilayɔrɔw ani foli-kɛsu yɔrɔw. Baarakɛminɛnw, fɛnw ɲɛminɛcogo ani u dacogo ka kan ka tiɲɛ sani u ka dilan.

Vacuum-Forming ani Thermoforming Seko ni dɔnko

Matte PET sɛbɛnfura min bɛ kɛ grade bɛnnenw bɛ se ka sumaya ka dilan ka kɛ sanubɔlanw , datugulanw ani pakew yɔrɔw cogoya ye. Foroko bɛ se ka yɔrɔ fɔlɔ cogoya Changer, haze ani thickness distribution, o la, sɛnɛko kɔrɔbɔliw ka kan ka kɛ.

Ji ni kemikaliw kɛlɛli

PET tɛ dugukolo sanfɛla ji minɛ nɔgɔya la wa a bɛ se ka fɛn caman kunbɛn minnu bɛ sɔrɔ tuma caman na. Ni a bɛ bɛn tulu kɛrɛnkɛrɛnnenw, furajiw, saniyalanw walima kemikɛlifɛnw ma, o ka kan ka sɛgɛsɛgɛ ka kɛɲɛ ni a kɛcogo laɲininenw ye.

Kuranko Insulasi Seko ni dɔnko

PET bɛ kɛ kuran ni insulasi baara sugandilenw na, nka kuran baarakɛcogo bɛ danfara ka kɛɲɛ ni a hakɛ, a bonya, a funteni ani a sɛgɛsɛgɛli sariya ye. Kuran-sɛnɛfɛn kɛrɛnkɛrɛnnen dɔ ka kan ka fɔ ni a ka kan ka kɛ ni insulasi baarakɛcogo sɛgɛsɛgɛlen ye.

Custom Sheet and Roll Supply ka kɛɲɛ ni mɔgɔw sago ye

HSQY bɛ se ka sɛbɛnfura min bɛ kɛ s jɔnjɔnw di, tigɛ sɛbɛnfura min bɛ kɛ s minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, rolls full-width walima slit rolls ka bɛn sɛbɛnnikɛlanw ma, forming lines, die-cutting equipment ani material-utilization requirements.

Mati PET plastiki sɛbɛnfura ni Mati finman BOPET filmi

Mati PET sɛbɛnfura min bɛ kɛ ani finman matte BOPET filimu fila bɛɛ ye poliyesitɛri fɛnw ye, nka u bɛ baara kɛ ni fɛn dilanni taabolo wɛrɛw ye. Fɛn min bɛ kɛ ka ɲɛ, o sugandili bɛ fɛn caman wajibiya ka tɛmɛn kumasen 'matte PET film.' bɛnkan kan.

Sannikɛla minnu bɛ BOPET substrat finman ɲini walasa ka pakew labɛn minnu bɛ se ka wuli, ka taamasiyɛn kɛ ni funteni ye walima ka ɛntɛrinɛti lamini teliyaba la, olu ka kan ka mikron janya wajibiyalenw di, furakɛli, kurukuruw cɛmancɛ ani finiko wajibiyalenw. Nin HSQY ɲɛ in bɛ kuma fɔlɔ matte thick-gauge PET sɛbɛnfura min bɛ kɛ ani roll material kan.

Matte PET ni PET sɛbɛn ɲɛnama ni ɲɔgɔn cɛ.

Mate PET Film ni Sheet ka baarakɛcogo

Box foli ani Retail Packaging

Mati PET sɛbɛnfura min bɛ kɛ bɛ se ka tigɛ ka sa, ka jate kɛ ani ka da ka kɛ kɛsu ye min bɛ yeelen bɔ, bolokɔniw, pakew finɛtiriw ani feerekɛyɔrɔw pakew masirilenw. A janya ni a kurulen cogoya ka kan ka sugandi ka kɛɲɛ ni kɛsu hakɛw ni fɛn dilannen girinya ye.

Panneau de imprimerie ani graphique

Kalansen minnu bɛ bɛn sɛbɛnni ma, olu bɛ se ka kɛ panɛriw ye minnu sɛbɛnnen don ɛkran kan, u yɔrɔw minnu sɛbɛnnen don ni UV ye, pakew minnu sɛbɛnnen don ni offset ye, labeliw, fɛnw jiralanw ani plastiki datugulanw minnu tɔgɔ sɛbɛnnen don.

Sɛbɛnnifɛnw ani Binding Covers

Sɛbɛnnifɛnw baarakɛcogo minnu bɛ kɛ tuma caman na, olu ye kaye datugulanw, sirilanw datugulanw, sɛbɛnw tilayɔrɔw, folifɛnw, menu dakunw, bololabaara sɛbɛnfura min bɛ kɛ s ani lakanani sɛbɛnw datugulanw.

Foroko minnu bɛ kɛ ni vacuum ye ani minnu bɛ kɛ ni thermoformé ye

Kalanso bɛnnenw bɛ se ka dilan ka kɛ pakew ye sanubɔlanw , lakanani datugulanw, finiw foroko, feerefɛnw dontaw ani plastiki yɔrɔ saba wɛrɛw.

Fɛn minnu bɛ kɛ ka fɛnw masiri ani minnu bɛ jira

Mati PET bɛ se ka kɛ sannikɛyɔrɔ panɛriw ye, fɛn dilannenw jiralanw, fɛnw dontaw ye minnu bɛ yeelen bɔ, taamasiyɛnw ani masirifɛnw ye yɔrɔ minnu na yɔrɔ min ka dɔgɔn, o ka fisa.

Industriw ni Kuranko yɔrɔw

PET kalasi sugandilenw bɛ se ka kɛ danfaralanw, datugulanw, lakanani sɛbɛnfura min bɛ kɛ s ani insulasi yɔrɔw ye. Kuran walima izini baarakɛcogo ka kan ka sɛgɛsɛgɛ ka kɛɲɛ ni fɛɛrɛko sariya wajibiyalen ye.

Aw ye fɛn wɛrɛw sɛgɛsɛgɛ PET sɛbɛnfura min bɛ kɛ fɛnw minnu bɛ kɛ ka pakew dilanni, sɛbɛnni ani thermoforming baarakɛcogo.

Mate PET plastiki sɛbɛnfura Janya sugandicogo

A janya bɛnnen bɛ bɔ yɔrɔ dafalen hakɛw la, a gɛlɛya wajibiyalen, a fɛn dilannen girinya, a dacogo, a sɛbɛnnikɛminɛnw ani a dilanni juguya.

O janya hakɛw ye sugandili siraw bɛɛ ye sanni ka kɛ ɛntɛrinɛti fɛnsɛbɛnni jɔnjɔnw ye. Misali dɔ ka kan ka kɔrɔbɔ ni baarakɛminɛnw, minɛnw ani a dilanni dafalen yɛrɛ ye.

Sɛbɛnni ni fɛn caman tigɛli laadilikanw

Écran, UV ani Offset sɛbɛnni

Sɛbɛnni nɔrɔli bɛ bɔ PET sanfɛla la, enki chimie la, yɔrɔ furakɛli la, a kɛnɛyali funteni na ani a maracogo la. Fɛn minnu ma furakɛ, olu man kan ka miiri u yɛrɛma ko u bɛ sɔn tintin sitɛmu bɛɛ ma.

Die Tigɛ ni Slitting

Blade cogoya, tigɛ tansiyɔn, sɛbɛnfura min bɛ kɛ funteni, a bonya ani a dilanni sira bɛ nɔ bila dawolo jogo la. Kɔrɔbɔli tigɛ ka kan ka kariw, buruburuw, hakɛ muɲuli ani dugukolo tiɲɛniw lajɛ.

Jatebɔ ni Foli

Score bonya, crease depth, folding radius ani sɛbɛnfura min bɛ kɛ sira bɛ nɔ bila foli finman ni spring-back la. PET min ka bon, o bɛ baarakɛminɛnw ni masin ladilancogo ɲuman de wajibiya.

Vacuum Forming ani Thermoforming (sɛnɛfɛnw sɛnɛcogo).

Fɛnɲɛnɛma sumaya, mɔbili funteni, ja hakɛ, nɛnɛ ni mɔli bɔli cogoyaw bɛ nɔ bila fɛn dilannenw janya ni u sanfɛla cogoya la. Fɛn min bɛ kɛ ni matte ye, o bɛ se ka ye ka caya walima ka dɔgɔya a sɔgɔlen kɔfɛ.

Gluing ani Lamination (Lamination) ye

Nɛgɛw, kasɛtiw ani filimu lamininenw ka kan ka sɛgɛsɛgɛ walasa u ni PET ni u ɲɛda matɛri bɛ bɛn ɲɔgɔn ma. Bond fanga, ɲɛnayeli cogoya ani kɔrɔya kuntaalajan ka kan ka lajɛ sani u ka caman dilan.

Ladilikan minnu bɛ kɛ ka misali ni jogoɲini sɛgɛsɛgɛliw kɛ

• A bonya ni a bonya muɲuni.

• Nivo matte, surface texture, haze ani transparence.

• A bɛ kɛ fan kelen walima fan fila matte ye.

• Kulɛriw ka ɲɔgɔndɛmɛ ani batch-to-batch yecogo.

• A ka gɛlɛn, a bɛ se ka wuli ka bɔ a nɔ na ani a bɛ se ka kɛ spring-back ye.

• Printing adhesion ani furakɛli kɛcogo.

• Die-cutting, slitting ani edge jogo ɲuman.

• Foli, scoring ani crease-whitening kɛcogo.

• Thermoforming juguya ani matte-surface marali.

• Adhesive, lamination ani protective-film bɛnkan.

• Dumuniko, kuran walima fɛn dantigɛlenw sɛbɛnw wajibiyalenw.

Custom Matte PET plastiki sɛbɛnfura Sugandiliw

• A janya bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ka bɔ milimɛtɛrɛ 0,18 na ka se milimɛtɛrɛ 1,2 ma.

• Standard sɛbɛnfura min bɛ kɛ s, custom tigɛ sɛbɛnfura min bɛ kɛ s, rolls ani slit rolls.

• Mate, frosted, low-gloss walima surface cogoya min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Kɛrɛ kelen matte, fan fila matte walima surface ɲagaminen cogoya.

• Kulɛri minnu bɛ ye, minnu bɛ yeelen bɔ ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Sanfɛla furakɛli min bɛ bɛn sɛbɛnni ma, ka kɛɲɛ ni tintiri sɛgɛsɛgɛli ye.

• Filimu min bɛ mɔgɔ tanga walasa ka baara kɛ ni sɔgɔsɔgɔninjɛ ye.

• Ladamu rollo bonya, sɛbɛnfura min bɛ kɛ hakɛw ani tigɛ muɲuli.

• Jagokɛlaw ka pakew ni palɛti wajibiyalenw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Kunnafoni minnu ka kan ka kɛ ka ɲɛsin Matte PET Quote ma

• A ka kan ka kɛ a janya ni a muɲuni ye.

• Sɛbɛn hakɛ, kuru bonya, kuru janya walima kuru girinya wajibiyalen.

• Kɛrɛ kelen walima fan fila matte surface.

• A wajibiyalen don transparent, haze, gloss level ani color.

• Sɛbɛnni, foli, die-cutting walima thermoforming kɛcogo.

• Lakana-filimu walima surface-furakɛli wajibiyalenw.

• Fɛn min dilannen don ani baarakɛyɔrɔ min bɛ baara kɛ.

• Kɔrɔbɔli hakɛ, caman hakɛ ani san ɲinini.

• Seereyaw, sariyaw walima sɛgɛsɛgɛli sariyaw wajibiyalenw.

• Destination port, jago waati ani jiginni don wajibiyalen.

Aw ka Matte PET Laɲiniw ci

Foroko ni fɛnw lasecogo

Misali la, a foroko : A4 sɛbɛnfura min bɛ kɛ s walima sɛbɛnfura misɛnnin minnu bɛ kɛ bɔrɔw ni kartɔnw kɔnɔ minnu bɛ mɔgɔ tanga.

Sɛbɛnw foroko : Kilo 30 ɲɔgɔn foroko kelen kɔnɔ, walima a bɛ kɛ ka kɛɲɛ ni sɛbɛnfura min bɛ kɛ hakɛw ni kiliyanw ka ɲininiw ye.

Kurukuruw foroko : Kilo 50 ɲɔgɔn kuru kelen na, walima ka kɛɲɛ ni a bonya, a bonya ani a dilanni wajibiyalenw ye.

Surface protection : Filimu min bɛ mɔgɔ tanga, PE wrapping, kraft paper walima interlayer lakanani bɛ se ka baro kɛ fɛnw kan minnu bɛ se ka sɔgɔsɔgɔ.

Palɛti foroko : Kilo 500-2000 ɲɔgɔn plywood palɛti kelen na, ka kɛɲɛ ni fɛn dilannenw hakɛ ye ani doni wajibiyalenw.

Minɛn doni : A bɛ se tɔni 20 ma, ka kɛɲɛ ni u foroko ye, ka kɛɲɛ ni fɛn dilannenw hakɛ ye ani ka kɛɲɛ ni u taayɔrɔ girinya dantigɛli ye.

Lasecogo: FOB, CIF ani EXW bɛ sɔrɔ.

Waati min bɛ kɛ ka caya: Tile 7-15 ɲɔgɔn donna wari bilalen kɔfɛ ani fɛn ɲɛfɔlenw sɔnni kɔfɛ, ka kɛɲɛ ni a hakɛ ni a kɛcogo ye.

A dilanni waati laban bɛ daminɛ ni fɛn ɲɛfɔcogo, a misali, a foroko ani a sarali sariyaw dafara. Dugukolo kan fɛnw ci waati tɛ don fɛn dilanni waati la.

Jogoɲumanya ni sariya labatoli jateminɛw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ PET fɛɛrɛko kunnafonidilan sɛbɛnfura min bɛ kɛ , PET resin SGS ka kunnafoni ye ani jogoɲumanya-sɛbɛn minnu bɛ sirataama. Sannikɛlaw ka kan k’a jira ko kunnafoni min bɛ tali kɛ fɛn tigitigi, a bonya, a kulɛri, a yɔrɔ ani a dilanni kulu la.

PET man kan ka fɔ a yɛrɛma ko a bɛ se ka tiɲɛ. Segin-ka-bɔnye bɛnkan bɛ bɔ PET hakɛ la, faralifɛnw, dugukolo sanfɛla furakɛli, taamasiyɛnw, nɔrɔlanw, jɔli dafalen ani fɛnw dalajɛcogo min bɛ sɔrɔ yɔrɔ sugu la.

Standard matte PET sɛbɛnfura min bɛ kɛ man kan ka jate a yɛrɛma ko a bɛ dumuniko siratigɛ la, furakɛli, furakɛli walima kuran-sɔrɔcogo sariyaw labato. Baarakɛcogo laɲininen ani sariya min bɛ sirataama, o ka kan ka di sani aw ka komandi kɛ.

Mun na i bɛ HSQY sugandi ka kɛ i ka Matte PET Supplier ye?

HSQY Plastic Group bɛ PET , PVC , PP ani plastiki sɛbɛnfura min bɛ kɛ fɛn wɛrɛw di pakew tigɛbagaw ma, sɛbɛnnikɛlanw, thermoforming sosiyetew, sɛbɛnnikɛlanw dilannikɛlaw, tilabagaw ani izini sannikɛlaw ma.

• Mati PET sɛbɛnfura min bɛ kɛ s ani a bɛ wuli ka bɔ milimɛtɛrɛ 0,18 na ka se milimɛtɛrɛ 1,2 ma.

• sɛbɛnfura min bɛ kɛ hakɛw ni rollo bonya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Kɛrɛ kelen ni fan fila matte sugandiliw.

• Sɛbɛnni, foli ani thermoforming misali dɛmɛnan.

• Protective-film ani custom pake suganditaw.

• PET fɛɛrɛko kunnafoniw ani SGS sɛbɛnw sɔrɔlenw.

• Bulk-order production ani export-packing dɛmɛni.

• FOB, CIF ani EXW quotation sugandiliw.

• Dɛmɛ don jatebɔlaw, fɛn caman tigɛlikɛlaw ani OEM porozɛw ma.

Sani u ka fɛn caman dilan, HSQY b’a ɲini ka fɛn sugandilenw kɔrɔbɔ ni sannikɛla ka sɛbɛnnikɛlan lakika ye, ni die-cutting tool ye, ni scoring system ye, ni foroko dilanni ye, ni nɔrɔlan ye ani ni fɛn dilanni minɛnw ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na Matte PET Film and Sheet kan

Matte PET filimu ye mun ye?

Mati PET filimu ye poliyesitiri fɛn ye min ɲɛda tɛ kɛnɛya kosɛbɛ walima a ɲɛda bɛ kɛ ni fɛn ye. Ka kɛɲɛ ni a bonya ye, a bɛ se ka dilan i n’a fɔ filimu min bɛ se ka wuli, min bɛ se ka wuli, a tilancɛ gɛlɛn sɛbɛnfura min bɛ kɛ walima a gɛlɛn sɛbɛnfura min bɛ kɛ .

Nin fura in ye BOPET filimu finman ye walima PET sɛbɛnfura min bɛ kɛ ?

Nin HSQY fura in ye fɔlɔ ye min bɛ kɛ ni fɛnba ye PET sɛbɛnfura min bɛ kɛ walima roll min janya bɛ se milimɛtɛrɛ 0,18 ma ka se milimɛtɛrɛ 1,2 ma. Filimu finmanw BOPET bɛ ɲɛfɔ cogoya la mikron na ani u bɛ kɛ fɛn caman tigɛli kɛcogo wɛrɛw la.

Danfara jumɛn bɛ matte PET ni glossy PET cɛ ?

Matte PET bɛ ni a ɲɛda cogoya ye min ɲɛ ka dɔgɔn min bɛ dɔ bɔ a ka ɲɛfɔli la. Glossy PET bɛ ni yɔrɔ jɛlen ye min bɛ yecogo jɛlen di tilennen ma ani ka ɲɛfɔli barikamaw jira minnu bɛ ye.

Yala matte PET ye transparent ye wa?

A bɛ se ka kɛ fɛn ye min bɛ ye walima min bɛ yeelen bɔ, nka a kɛcogo matirilen bɛ yecogo jɛnsɛn. Kɛnɛya bɛ bɔ a bonya, a sisi, a sanfɛla gɛlɛya ani a yeelen cogoya la.

Yala matte PET ye filimu ye min bɛ yeelen bɔ wa?

Matte surface bɛ se ka dɔ bɔ yeelen yelen na ni i y’a suma ni PET ye min bɛ manamana. A man kan ka kɛ a yɛrɛma i n’a fɔ ɲɛkisɛw kɛlɛli fura min sɛgɛsɛgɛlen don fo ni kɛnɛya, sisi walima ɲɛkisɛ hakɛ kɛrɛnkɛrɛnnenw sɛgɛsɛgɛra.

Yala matte surface bɛ sɔrɔ fan kelen fɛ walima fan fila bɛɛ fɛ wa?

Kɛrɛ kelen ni fan fila matte cogoyaw bɛ se ka baro kɛ. Surface structure wajibiyalen ka kan ka fɔ ni i bɛ quotation walima sample ɲini.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

HSQY bɛ a janya di ka bɔ milimɛtɛrɛ 0,18 na ka se milimɛtɛrɛ 1,2 ma. A janya bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye ani a muɲuli ka kan ka dafa sani aw ka komandi kɛ.

sɛbɛnfura min bɛ kɛ hakɛ jumɛnw bɛ sɔrɔ?

A hakɛ dantigɛlenw ye milimɛtɛrɛ 610 × 610, milimɛtɛrɛ 700 × 1000, milimɛtɛrɛ 915 × 1220, milimɛtɛrɛ 915 × 1830 ani milimɛtɛrɛ 1220 × 2440 ye. Ladamu hakɛw fana bɛ se ka dilan.

Rollo bonya jumɛnw bɛ sɔrɔ?

Kurukuruw bonya bɛ bɔ milimɛtɛrɛ 110 na ka se milimɛtɛrɛ 1280 ma, ka kɛɲɛ ni u bonya, u tigɛcogo muɲuni ani u dilanni wajibiyalenw ye.

Yala matte PET sɛbɛnfura min bɛ kɛ bɛ se ka sɛbɛn wa?

Kalanso bɛnnenw bɛ se ka dɛmɛ don ekran, UV walima offset sɛbɛnni na. Sanfɛla furakɛli, tintin nɔrɔli, a kɛnɛyali funteni ani a dacogo ka kan ka sɛgɛsɛgɛ sani a ka kɛ jamaba ye.

Yala matte PET bɛ korona furakɛli de wajibiya sɛbɛnni kama wa?

Furakɛli wajibiyalen bɛ bɔ tintin, sɛbɛnni kɛcogo ani PET yɔrɔ la. Sannikɛlaw ka kan ka sɛbɛnni kɛcogo di walasa fɛn bɛnnen min furakɛra walima min bɛ bɛn sɛbɛnni ma, o ka se ka jateminɛ.

Yala matte PET sɛbɛnfura min bɛ kɛ bɛ se ka foli kɛ wa?

Ɔwɔ, janya bɛnnenw bɛ se ka jate ani ka foli. Fɛnɲɛnɛmaw ɲɛsincogo, kurukuruw juguya, foli radius ani u bonya bɛ nɔ bila finman, kari ani spring-back.

Yala matte PET sɛbɛnfura min bɛ kɛ bɛ se ka kɛ thermoformé ye wa?

Kalanso bɛnnenw bɛ se ka kɛ ni vacuum ye walima ka kɛ thermoformed ye. Sumaya ni a sɔgɔli bɛ se ka finimugu matɛri, sisi ani kogo janya Changer, o la foroko kɔrɔbɔliw de ka kan.

Yala filimu min bɛ mɔgɔ tanga, o bɛ se ka fara a kan wa?

Filimu min bɛ mɔgɔ tanga, o bɛ se ka baro kɛ fɛn ɲɛfɔlenw kan minnu bɛ mago ɲɛ sɔgɔsɔgɔninjɛ lakanani wɛrɛw la sɛbɛnni, tigɛ, dilan, taa ni a lajɛ walima a lajɛ waati.

Yala matte PET bɛnnen don dumuni foroko ma wa?

A bɛnnen don, o bɛ bɔ PET hakɛ tigitigi la, faralifɛnw, dugukolo sanfɛla furakɛli, dumuni suguya, ɲɔgɔn sɔrɔli cogoya ani taayɔrɔ-sugu sariyaw. Dumuni ni ɲɔgɔn cɛ wajibiyalenw ka kan ka fɔ sani aw ka komandi kɛ.

Yala matte PET bɛ se ka tiɲɛ wa?

Standard PET man kan ka ɲɛfɔ cogoya la ko a bɛ se ka tiɲɛ. Segin-ka-bɔnye seko bɛ bɔ fɛnw jɔcogo la, faralifɛnw, nɔgɔli ani sigida la fɛnw lajɛcogo ni u lasegincogo.

Yala matte PET bɛ se ka kɛ ka kuran sɔgɔli kɛ wa?

PET kalasi sugandilenw bɛ se ka kɛ insulasi baarakɛcogo la, nka kuran nafa ka kan ka dafa ni janya wajibiyalen ye, sɛgɛsɛgɛli kɛcogo ani baarakɛcogo funteni.

Matte PET sɛbɛnfura min bɛ kɛ ka kan ka saniya cogo di?

Aw bɛ finimugu nɔgɔlen dɔ kɛ ni ji ye walima saniyalan nɔgɔman min tɛ fɛn wɛrɛ kɛ a la. Aw bɛ aw yɛrɛ tanga fɛnɲɛnamafagalanw ma minnu bɛ sɔgɔsɔgɔ walima furakisɛ barikamaw fo ni a bɛ bɛn ɲɔgɔn ma.

Koman hakɛ fitinin ye mun ye?

Koman hakɛ fitinin min bɛ kɛ ka kɛɲɛ ni sariya ye, o ye kilo 1000 ye. Kulɛri kɛrɛnkɛrɛnnenw, u bonya tɛ deli ka kɛ, u ɲɛda furakɛli walima u dilanni kɛcogo ladamulen bɛ se ka kɛ sababu ye ka MOQ wɛrɛ wajibiya.

Yala misaliw bɛ sɔrɔ wa?

Awɔ. A4 sɛbɛnfura min bɛ kɛ s walima misali danmadɔw bɛ se ka di walasa ka jateminɛ kɛ a bonya, a ɲɛda cogoya matiriyali, a sɛbɛnni, a dacogo ani a dilanni baarakɛcogo jateminɛ. A ka c’a la, doni bɛ lajɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A dilanni waati bɛ kɛ tile 7-15 ɲɔgɔn na, a bilali kɔfɛ, a ɲɛfɔli ani a misali wajibiyalenw dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a bonya, a bonya, a rollo bonya, a fan matte, a jɛlen, a kulɛri, a hakɛ, a sɛbɛnni walima a dilanni fɛɛrɛ, a lakanani-filimu wajibiyalen, a taayɔrɔ ani a labatoli sariyaw di minnu bɛ sirataama.

Aw ye Custom Matte PET Quote sɔrɔ