0.2mm Frosted PVC Sheet fɔ Pakɛj Fɔd

0.2mm Frosted PVC Sheet fɔ Pakɛj Fɔd

HSQY 0.2mm frosted rigid PVC sheet na fɔ thermoformed pak, klia ɛn translucent pak kɔmpɔnɛnt, folding bɔks ɛn ɔda pak aplikeshɔn dɛn we nid fɔ gɛt mat ɔ frosted sɔfays instead fɔ wan kɔvɛnshɔnal ay-glos finish.

Di frɔst sɔfays de gi sɔft vishɔnal apinɛns, ridyus dairekt glare ɛn ɛp fɔ mek finga prɛnt ɛn smɔl sɔfays mak dɛn nɔ de si bɛtɛ we i de kip pat pan di prɔdak visibiliti. Dɛn kin gi transparent, translucent ɛn sɛlɛkɛt kɔlɔ gred dɛn akɔdin to di pak dizayn we dɛn nid.

Dis prodakt ficha 0.2mm target tiknes, we riletid rigid PVC pak spesifikeshɔn dɛn kin saplae frɔm aprɔksimatli 0.15mm to 1mm akɔdin to fɔm we, wit, sɔfays finish ɛn ɛnd-yuz rikwaymɛnt. Di saiz ɛn waid dɛn we dɛn kɔstɔmayt de fɔ di wan dɛn we de kɔnvɔyt ɛn di wan dɛn we de mek pak.

Fɔ dairekt ɔ indayrɛkt it-kɔntakt aplikeshɔn, di ɛksaktɔ PVC fɔmyulashɔn ɛn sɔpɔtin dɔkyumentri fɔ kɔnfyus akɔdin to di it we dɛn pak, kɔntakt kɔndishɔn ɛn di dɛstineshɔn-maket rikwaymɛnt bifo dɛn yuz am fɔ kɔmɛshɔn.

Frosted PVC sheet prodakt imej dɛn

0.2mm Frosted PVC Sheet Spesifikasi

*Densiti, tɛnsiɛl trɛnk ɛn impak valyu na rɛfrɛns valyu frɔm di HSQY rigid PVC famili spɛsifikɛshɔn we de naw. Faynal valyu dɛn fɔ kɔnfyus fɔ di ɛksaktɔ 0.2mm frɔst gred bifo yu bay.

Wetin Na Frɔst PVC Shit?

Frosted PVC sheet na rigid ɔ semi-rigid PVC matirial wit mat ɔ tɛkstɔr sɔfays we de difyuz riflɛkt layt ɛn ridyus di ay-glos apinans fɔ kɔvɛnshɔnal polish PVC.

Dipen pan sɔfayz tɛkstɔr ɛn matirial fɔmyulashɔn, di finish kin kɔmɔt frɔm layt mat ɛn translucent to wan mɔ visibly frosted apinans. Dis de alaw di wan dɛn we de mek pak fɔ jɔyn pat pan di prɔdak visibiliti wit wan sɔft sɔfayz prɛzɛntɛnshɔn.

Fɔ pak aplikeshɔn, di matirial kin saplae insay wan sɛlɛkɛt tik, wit ɛn sɔfays finish ɛn kɔnvɔyt bay thermoforming, vaykum fɔm, kɔt, fold ɔ ɔda kɔmpatibl prɔses.

Benefit dɛm fɔ wan Frosted ɔ Matte PVC Surface

• Ridyus Dairekt Glɛr: Di frɔst sɔfays de mek i luk saf pas kɔvɛnshɔnal ay-glos transparent PVC.

• Kontrol Prodakt Visibiliti: Transparent ɔ translucent gred kin mentɛn pat pan visibiliti we i de ridyus di ful transparent luk fɔ polish PVC.

• Lɔwa Finga Prɛnt Visibiliti: Mat tɛkstɔr kin mek finga prɛnt ɛn smɔl smɔl mak dɛn we de ɔp di say we yu de handle nɔ notis.

• Packaging Apparance: Frosted surfaces de gi difrɛn vijual ɛn taktil prɛzɛntɛnshɔn fɔ rital pak.

• Thermoforming Capability: Dɛn kin ɔt di rayt gred dɛn ɛn fɔm dɛn to pak kaviti dɛn pan kɔmpitabl ikwipmɛnt.

• Kastom Surface Options: Dɛn kin evalyu mat/mat, mat/glossy ɔ ɔda tɛkstɔr kɔmbaynshɔn dɛn akɔdin to di apinɛns we dɛn nid.

• Kastom Dimɛnshɔn: Tik, sheet saiz, wit ɛn kɔlɔ kin mach to kɔnvɔyt ɛn pak rikwaymɛnt.

Pɔfɔmɛnshɔn opshɔn dɛn lɛk anti-statik, UV stebilizayshɔn, flaym pefɔmɛns, fud-kɔntakt fɔmyulashɔn ɔ spɛshal printin tritmɛnt nid aplikeshɔn-spɛsifi k gred ɛn dɛn fɔ de insay di aprɔv prodak spesifikeshɔn.

0.2mm PVC fɔ Tɛrmofɔm Pakɛj

We i tik lɛk 0.2mm, rigid PVC fayn fɔ sɔm laytwɛt pak aplikeshɔn usay dɛn nid fɔ gɛt rili tin fɔm wɛb. Aktual suitability dipen pan cavity geometry, draw ratio, pakej stiffness, fom temperechur, mashin setin en finished-paket pefomans rikwaym.

fכ dip kכva כ paket dεm we nid mכr rigiditi, dεn kin nid fכ tik mεtirial. Di wan dɛn we de bay fɔ gi di dimɛnshɔn dɛn we dɔn dɔn di pakej ɛn di dip we dɛn de fɔm we dɛn de aks fɔ di tin dɛn we dɛn dɔn tɔk bɔt.

Aplikeshɔn dɛn fɔ Pak Fɔd

Prodyuz Pakɛj we dɛn de mek

Dɛn kin ebul fɔ evaluate di rayt fud-kɔntakt gred fɔ thermoformed prodɔkt pak usay di pak dizayn nid rigid kɔnstrɔkshɔn ɛn wan mat ɔ frɔst apinans.

Bakery ɛn Kɔnfɛkshɔn Pakɛj

Frɔst PVC kin yuz fɔ sɔm sɛlɛkɛt bekɛri, kɔnfɛkshɔn, insay ɛn displei-pak aplikeshɔn afta dɛn dɔn kɔnfɔm di tin dɛn we dɛn nid fɔ gɛt fɔ kɔntakt it ɛn di tɛmpracha kɔndishɔn fɔ di prɔdak we dɛn pak.

Trey ɛn Insɛt dɛn we gɛt Tɛmofɔm

Suitabl rigid PVC gred dɛn kin fɔm insay shalo trey, insɛt ɛn ɔda pak kɔmpɔnɛnt dɛn. Tiknes fɔ pik akɔdin to di dip na di kaviti, di rigiditi ɛn di tin dɛn we dɛn nid fɔ handle.

Fɔl Bɔks ɛn Pakɛj Windo

Dɛn kin yuz mat ɔ frɔst PVC bak fɔ fold bɔks, transparent pak winda ɛn dɛkɔretiv pak kɔmpɔnɛnt usay dɛn kin lɛk fɔ luk translucent.

Di Tin dɛn we Yu fɔ Du fɔ Kɔntakt fɔ it

Nɔto ɔl rigid ɔ frɔst PVC gred fɔ ɔtomɛtik trit as fayn fɔ dairekt it kɔntakt. Fɔd-kɔntakt suitability dipen pan di kɔmplit fɔmyulashɔn, aditiv, pak it, kɔntakt durayshɔn, kɔntakt tɛmpracha ɛn di rikwaymɛnt fɔ di dɛstineshɔn makit.

Fɔ di fud-pak projɛkt, gi di kayn it we dɛn want fɔ it, ilɛksɛf di kɔntakt na dairekt ɔ indayrɛkt, di tɛmpracha we dɛn de op fɔ stɔrɔj, di tɛm we dɛn go kɔntakt ɛn di rigyuletɔri dɔkyumentri we dɛn nid we yu de aks fɔ kot.

Di sɛtifiket, diklareshɔn ɔ tɛst ripɔt dɛn we de fɔ bi verify agens di ɛksaktɔ 0.2mm frɔst PVC fɔmyulashɔn we dɛn de saplae pas fɔ aplay jɛnɛral to ɛvri PVC prodak.

Aw fɔ Spɛsifik Frosted PVC fɔ Yu Pakɛj Layn

Fɔ pripia wan fayn matirial spɛsifikɛshɔn ɛn kot, gi dɛn infɔmeshɔn ya:

• Tik we yu nid, lɛk 0.2mm

• Di sheet ɔ rol wit we dɛn nid

• Sheet lɔng ɔ rol dimɛnshɔn dɛn

• Mat/mat, mat/glos ɔ ɔda say we dɛn nid

• Transparent, translucent, wayt ɔ kɔstɔmayt kɔlɔ

• Tɛmofɔmin, vaykum fɔm, fold ɔ printin prɔses

• Finish pakej dimɛnshɔn dɛn

• Fɔm dip

• Prodakt we dɛn pak

• Dairekt ɔ indayrɛkt kɔndishɔn fɔ kɔntakt it if i apɔynt

• Di dɔkyumɛnt dɛn we dɛn nid fɔ fala fɔ fala di lɔ

• Ɔda kwantiti

• Di kɔntri ɔ pɔt usay dɛn de go

Fɔ nyu thermoforming projɛkt, i fayn fɔ tɛst di PVC we dɛn dɔn pik pan di mashin ɛn mold we dɛn want bifo dɛn mek am fɔ kɔmɛshɔn. Fɔm yunifom, sɔfayz apinɛns, kaviti difinishɔn, pakej rigiditi ɛn ɛni silin rikwaymɛnt fɔ verify di tɛm we dɛn de tray.

Teknik Dokumɛnt dɛn

Di PVC dɔkyumɛnt dɛn we dɔn de dɔŋ ya de fɔ rifer to. Duya kɔnfirm se di dɔkyumɛnt de aplay to di rayt matirial gred we yu de bay.

PVC Klia Shit Data Sheet

Flammabiliti fɔ PVC Rigid Sheet

PVC Grey Bod Test Ripɔt

PVC Klia Film Data Sheet we de mek yu fil

PVC Sheet Test Ripɔt

20mm Grey Bod Test Ripɔt

PVC Sheet fɔ Ɔfset Printin Tɛst Ripɔt

Aplikeshɔn Pikchɔ dɛn

Pakɛj ɛn Delivri

• Sampul Pak: A4-sayz rigid PVC sɛmpul dɛn kin pak insay protɛktiv bag ɛn katon.

• Rol Packaging: Na lɛk 50kg pan wan rol usay rol saplae de aplay, ɔ akɔdin to wetin di kɔstɔma nid.

• Palet Palet: Na lɛk 500–2000kg pan wan plai wud palet dipen pan di matirial dimɛnshɔn ɛn pak kɔnfigyushɔn.

• Kɔntinɛnt Lod: Na lɛk 20 tan ɔnda standad lod kɔndishɔn, we de ɔnda di rol ɔ shit dimɛnshɔn ɛn fayn pak kɔnfigyushɔn.

• Dilivri Tɛm: EXW, FOB, CNF ɛn DDU.

• Tipik Lid Taym: Na lɛk 10–14 dez afta dipɔsit, dipen pan spɛsifikɛshɔn ɛn ɔda volyum.

Sɛtifiket ɛn Kwaliti Dokumɛnt dɛn

Di sɛtifiket ɛn tɛst dɔkyumɛnt dɛn we de fɔ mach wit di ɛksaktɔl frɔst PVC gred we dɛn de gi. If yu prɔjek nid fɔ gɛt it-kɔntakt, restricted-substance ɔ ɔda patikyula dɔkyumɛnt, put di standad we yu nid wit yu kwɛstyɔn.

Globɛl Ɛgzibishin dɛn

HSQY Plastic Group de tek pat pan intanashɔnal ɛgzibishin fɔ mit pak manifakta dɛn, thermoforming kɔmni dɛn, distribyushɔn dɛn, plastic kɔnvɔta dɛn ɛn ɔda pɔshɔnal bayer dɛn.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 0.2mm Frosted PVC Sheet

Wetin na di difrɛns bitwin frɔst PVC ɛn klia glos PVC?

Glossy PVC gɛt smol smol riflektiv surface ɛn i de gi klia dairekt visibiliti. Frɔst PVC de yuz mat ɔ tɛkstɔr sɔfays fɔ difyuz riflɛkshɔn ɛn mek wan saf translucent apinans.

0.2mm PVC fit fo thermoforming?

Wan fayn 0.2mm rigid PVC gred kin thermoformed fɔ sɛlɛkɛt laytwɛt pak. Faynal suitabiliti dipen pan di kaviti dip, mold dizayn, fɔm tɛmpracha, mashin sɛtin ɛn rigiditi we dɛn nid fɔ pakej.

Frosted PVC fayn fɔ kɔntakt it?

Di fayn we aw dɛn kin kɔntakt it kin dipen pan di rayt we aw dɛn mek am ɛn di we aw dɛn want fɔ yuz am. Duya gi di kayn it, di tɛmpracha fɔ di kɔntakt, di tɛm we dɛn fɔ kɔntakt ɛn di tin we dɛn nid fɔ du na di say we dɛn want fɔ go-maket so dat dɛn go ebul fɔ ebul fɔ no di rayt gred ɛn di dɔkyumɛnt dɛn we de.

Us tik tik dɛn de?

Dis prodakt de fos pan 0.2mm frosted PVC. Rilayt pak-grɛd rigid PVC spɛsifikɛshɔn dɛn kin saplae frɔm lɛk 0.15mm to 1mm, sɔbjɛkt to di rikwayd sɔfays, wit ɛn prɔsesin we.

A kin pik mat na wan say ɛn glos na di ɔda say?

Mat/mat, mat/glossy ɛn ɔda sɔfayz kɔmbaynshɔn dɛn kin tɔk bɔt akɔdin to di tik we dɛn nid, prodakshɔn kapasiti ɛn ɔda kwantiti.

Yu tink se yu kin kɔstɔmayt di PVC sheet in kɔlɔ?

Yɛs. Transparent, translucent, wayt ɛn sɛlɛkɛt kɔstɔmayz kɔlɔ dɛn kin evalyu akɔdin to tik, sɔfayz finish ɛn ɔda kwantiti.

Wetin na di maksimal waid we de?

Di rigid PVC spɛsifikɛshɔn we de naw de list wan rɛfrɛns maksimal wit we na lɛk 1280mm. Faynal avaylabl wit fɔ kɔnfyus fɔ di 0.2mm frɔst gred we dɛn dɔn pik.

Yu tink se dɛn kin print frɔst PVC?

Yu kin yuz fayn PVC gred dɛn wit kɔmpitabl printin prɔses. Ink sistem, surface enaji, matte texture ɛn rikwayd adheshon fɔ evaluate bifo bulk prodakshɔn.

A kin aks fɔ sampul bifo a ɔda?

Dɛn kin tɔk bɔt sampul matirial akɔdin to di tik we de, di say we dɛn dɔn finish ɛn di kɔlɔ we de. Fɔ thermoforming projɛkt, i fayn fɔ tɛst di sampul pan di intended fɔm ikwipmɛnt bifo bulk prodakshɔn.

Wetin na di minimum ɔda kwantiti?

Di MOQ we de na di list naw na 1000kg. Di kɔlɔ dɛn we dɛn kɔstɔmayz, di tɛkstɔr dɛn we de na di wɔl ɔ spɛshal dimɛnshɔn dɛn kin nid difrɛn minim prodakshɔn kwantiti dɛn.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi tik, wit ɔ sheet saiz, sɔfays kɔmbaynshɔn, kɔlɔ, fɔm ɔ printin prɔses, dimɛnshɔn fɔ di pakej we dɔn dɔn, di tin dɛn we yu nid fɔ gɛt fɔ kɔntakt it if i pɔsibul, di kwantiti ɛn usay yu de go.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae rigid PVC sheet ɛn film fɔ thermoforming, pak, print, folding bɔks ɛn industrial kɔnvɛnshɔn. Di prɔdak dɛn we de inklud klia, kɔlɔ, mat, frɔst ɛn aplikeshɔn-spɛsifi k PVC gred fɔ manifakta, kɔnvɔta ɛn distribyushɔn.

Fɔ frosted PVC pak projɛkt, HSQY kin tɔk bɔt tik, wit, shit ɔ rol dimɛnshɔn, mat sɔfa kɔmbayn, kɔlɔ, fɔm rikwaymɛnt, sɛmpul, tɛknikal dɔkyumɛnt, pak ɛn bɔlk saplai akɔdin to di kɔstɔma in aplikeshɔn.