0.2mm Frosted PVC Krataa a wɔde yɛ Aduan a wɔde kyekyere nneɛma

0.2mm Frosted PVC Krataa a wɔde yɛ Aduan a wɔde kyekyere nneɛma

HSQY 0.2mm frosted rigid PVC krataa no yɛ nea wɔayɛ ama thermoformed packaging, pefee na translucent packaging afã horow, folding nnaka ne afoforo packaging applications a ɛhwehwɛ matte anaa frosted soro sen sɛ amanne kwan so high-gloss wie.

Frosted surface no ma wotumi hu ade a ɛyɛ mmerɛw, ɛtew hann a ɛhyerɛn tẽẽ so na ɛboa ma nsateaa nkyerɛwee ne soro agyiraehyɛde nketenkete no ntumi nhu kɛse bere a ɛkora nneɛma no fã bi a wotumi hu no so. Wobetumi de kɔla ahorow a ɛyɛ mmerɛw, ɛyɛ hann ne nea wɔapaw ama sɛnea nneɛma a wɔde kyekyere nneɛma ho nhyehyɛe a wɔhwehwɛ no te.

Saa adeɛ yi kyerɛ 0.2mm botaeɛ thickness, berɛ a ɛfa ho rigid PVC packaging specifications betumi ama fi bɛyɛ 0.15mm kɔ 1mm sɛdeɛ forming kwan, trɛw, soro wie ne end-use ahwehwɛdeɛ. Nneɛma akɛse ne ne tɛtrɛtɛ a wɔahyɛ da ayɛ no wɔ hɔ ma converters ne packaging manufacturers.

Wɔ aduan a wɔde di nkitaho tẽẽ anaa nea ɛnteɛ ho no, ɛsɛ sɛ wosi PVC a wɔayɛ no pɛpɛɛpɛ ne nkrataa a ɛfoa so no so dua sɛnea aduan a wɔakyekyere, nkitahodi tebea ne baabi a wɔrekɔ-gua ahwehwɛde ahorow te ansa na wɔde adi dwuma wɔ aguadi mu.

Frosted PVC Kratafa Nneɛma a Wɔde Yɛ Mfonini

0.2mm Frosted PVC Krataa Nkyerɛkyerɛmu

*Density, tensile ahoɔden ne impact values ​​yɛ reference values ​​a ɛfiri HSQY rigid PVC abusua specification a ɛwɔ hɔ dada no mu. Ɛsɛ sɛ wɔsi gyinapɛn a etwa toɔ no so dua ma 0.2mm frosted grade pɔtee no ansa na wɔatɔ.

Dɛn Ne Frosted PVC Krataa?

Frosted PVC krataa yɛ PVC ade a ɛyɛ den anaa ɛyɛ den fã a ɛwɔ matte anaa textured surface a ɛtrɛw hann a ɛdannan no mu na ɛtew high-gloss a ɛte sɛ PVC a wɔayɛ no fɛfɛɛfɛ a wɔtaa de di dwuma no so.

Ɛdenam sɛnea ɛwɔ soro ne sɛnea wɔayɛ so no, nea wɔde wie no betumi afi matte kakra na ɛyɛ translucent so akosi sɛnea wotumi hu sɛ awɔw ayɛ no kɛse. Eyi ma wɔn a wɔyɛ nneɛma a wɔde kyekyere nneɛma ho no tumi de nneɛma no fã bi a wotumi hu ne nea wɔde kyerɛ wɔ soro a ɛyɛ mmerɛw bom.

Wɔ nneɛma a wɔde kyekyere nneɛma mu no, wobetumi de nneɛma no ama wɔ ne kɛse, ne tɛtrɛtɛ ne ne soro a wɔapaw mu na wɔadan no denam thermoforming, vacuum forming, cutting, folding anaa akwan foforo a ɛne no hyia so.

Mfaso a ɛwɔ Frosted anaa Matte PVC Surface so

• Reduced Direct Glare: Frosted surface no ma ɛyɛ mmerɛw sen PVC a ɛhyerɛn kɛse a ɛyɛ mmerɛw a wɔtaa de di dwuma no.

• Controlled Product Visibility: Nneɛma a ɛyɛ mmerɛw anaasɛ ɛyɛ hann betumi akura nea wotumi hu no fã bi mu bere a ɛtew sɛnea PVC a wɔayɛ no fɛfɛɛfɛ no hwɛbea yɛ nea ɛda adi koraa no so.

• Nsateaa a Ɛba Fam a Wohu: Matte textures betumi ama nsateaa nkyerɛwee ne nneɛma nketenkete a ɛwɔ soro no ayɛ nea wontumi nhu kɛse bere a woredi ho dwuma no.

• Nneɛma a wɔde kyekyere nneɛma: Nneɛma a awɔw wom no ma wonya nkyerɛkyerɛmu a ɛyɛ soronko wɔ aniwa ne nea wɔde nsa ka ho ma nneɛma a wɔde kyekyere nneɛma wɔ sotɔɔ mu.

• Thermoforming Capability: Wobetumi ama grades a ɛfata ayɛ hyew na wɔayɛ no packaging cavities wɔ nnwinnade a ɛne no hyia so.

• Custom Surface Options: Wobetumi asusuw Matte/matte, matte/glossy anaa afoforo textured nkabom ho sɛnea wɔhwehwɛ sɛnea ɛte.

• Custom Dimensions: Wobetumi de ne kɛse, ne kɛse, ne trɛw ne ne kɔla ahyia ne nsakrae ne nneɛma a wɔde kyekyere nneɛma a wɔhwehwɛ.

Adwumayɛ ho akwan te sɛ anti-static, UV stabilization, ogya adwumayɛ, aduan a ɛne no di nkitaho anaasɛ tintim ayaresa titiriw hwehwɛ sɛ wɔde di dwuma pɔtee bi na ɛsɛ sɛ wɔde ka aduru no ho nkyerɛkyerɛmu a wɔapene so no ho.

0.2mm PVC ma Thermoformed Nneɛma a wɔde kyekyere nneɛma

Wɔ bɛyɛ 0.2mm kɛse mu no, PVC a ɛyɛ den no fata ma nneɛma a wɔapaw a emu yɛ hare a wɔde kyekyere nneɛma wɔ baabi a ɛho hia sɛ wɔde ntaban a ɛyɛ teateaa a ɛyɛ tratraa. Fata ankasa gyina cavity geometry, draw ratio, package stiffness, forming temperature, mfiri nhyehyɛe ne finished-package adwumayɛ ahwehwɛde ahorow so.

Wɔ abura a emu dɔ anaasɛ nneɛma a wɔde kyekyere nneɛma a ɛhwehwɛ sɛ ɛyɛ den kɛse ho no, ebia ɛho behia sɛ wɔde ade a ɛyɛ den di dwuma. Ɛsɛ sɛ adetɔfo de package a wɔawie no nsusuwii ne forming depth ma bere a wɔrebisa nneɛma ho nyansahyɛ ahorow no.

Aduan a Wɔde Gu Nneɛma Mu a Wɔde Di Dwuma

Produce Nneɛma a Wɔde Gu Nneɛma Mu

Wobetumi asusuw nnuan a wɔde di nkitaho a ɛfata ho ama nneɛma a wɔde thermoformed ayɛ a wɔde kyekyere nneɛma a wɔde kyekyere nneɛma a wɔde kyekyere nneɛma ho wɔ baabi a nneɛma a wɔde kyekyere nneɛma ho nhyehyɛe hwehwɛ sɛ wɔyɛ no denneennen na ɛte sɛ nea ɛyɛ matte anaasɛ frosted.

Bakery ne Confectionery Nneɛma a Wɔde Gu Nneɛma Mu

Wobetumi de Frosted PVC adi dwuma ama bakery, confectionery, insert ne display-packaging applications a wɔapaw bere a wɔahyɛ aduan a wɔde di nkitaho ahwehwɛde ne ɔhyew tebea a ɛwɔ ade a wɔakyekyere no mu no so dua akyi.

Trays ne Nneɛma a Wɔde Hyehyɛ Mu a Wɔayɛ no Ɔhyew

Wobetumi ayɛ PVC grades a ɛyɛ den a ɛfata ayɛ no trays a ɛnyɛ den, inserts ne nneɛma afoforo a wɔde kyekyere nneɛma. Ɛsɛ sɛ wɔpaw thickness sɛnea cavity bun, rigidity ne handling ahwehwɛde ahorow te.

Nnaka a Wɔbobɔw ne Mfɛnsere a Wɔde Gu Nneɛma Mu

Wobetumi nso de Matte anaa frosted PVC adi dwuma ama nnaka a wɔbobɔw, mfɛnsere a wɔde kyekyere nneɛma a ɛda adi pefee ne nneɛma a wɔde kyekyere nneɛma a wɔde siesie nneɛma wɔ baabi a wɔpɛ sɛ ɛyɛ nea ɛyɛ hann.

Aduan a Wɔde Di Dwuma Ho Ahwehwɛde

Ɛnyɛ sɛ ɛsɛ sɛ wɔde PVC a ɛyɛ den anaasɛ awɔw ayɛ biara di dwuma ara kwa sɛ ɛfata sɛ wɔde di nkitaho tẽẽ. Aduan a ɛne no di nkitaho a ɛfata no gyina nea wɔayɛ no nyinaa, nneɛma a wɔde ka ho, aduan a wɔakyekyere, bere tenten a wɔde di nkitaho, ɔhyew a ɛne no di nkitaho ne nea wɔhwehwɛ wɔ gua a wɔde kɔ hɔ no so.

Wɔ nnuan a wɔde kyekyere nneɛma ho nnwuma ho no, fa aduan ko a wopɛ sɛ wodi ho dwuma, sɛ́ ɛyɛ nea wɔde di nkitaho tẽẽ anaasɛ ɛnteɛ, ɔhyew a wɔhwɛ kwan sɛ wɔde besie, bere tenten a wɔde di nkitaho ne mmara ho nkrataa a wɔhwehwɛ bere a worebisa sɛ wɔmfa sika mma no ma.

Ɛsɛ sɛ wɔde adansedie nkrataa, mpaemuka anaa sɔhwɛ amanneɛbɔ a ɛwɔ hɔ no di dwuma de toto 0.2mm frosted PVC formulation pɔtee a wɔde rema no ho sene sɛ wɔde bedi dwuma wɔ PVC adeɛ biara ho wɔ ɔkwan a ɛkɔ akyiri so.

Sɛnea Wobɛkyerɛ Frosted PVC ama Wo Packaging Line

Sɛ wopɛ sɛ wusiesie nsɛm no ho nkyerɛkyerɛmu ne nsɛm a wɔafa aka a ɛfata a, fa nsɛm a edidi so yi ma:

• Ɛho hia sɛ ɛyɛ kɛse, te sɛ 0.2mm

• Krataa anaa nhoma mmobɔwee trɛw a wɔhwehwɛ

• Krataa tenten anaa nhoma mmobɔwee nsusuwii

• Matte/matte, matte/glossy anaa biribi foforo a wɔhwehwɛ

• Kɔla a ɛyɛ mmerɛw, ɛyɛ hann, fitaa anaa nea wɔayɛ no sɛnea wɔpɛ

• Thermoforming, vacuum forming, folding anaa tintim nhyehyɛe

• Wɔawie package no nsusuwii

• Forming bun mu

• Ade a wɔde ahyɛ mu

• Tebea horow a ɛfa aduan a wɔde di nkitaho tẽẽ anaasɛ ɛnteɛ sɛ ɛfata a

• Nkrataa a wɔhwehwɛ a ɛkyerɛ sɛnea wodi mmara so

• Order dodow a wɔkra

• Ɔman anaa hyɛn gyinabea a wɔrekɔ

Wɔ thermoforming adwuma foforo ho no, wɔkamfo kyerɛ sɛ wɔnsɔ PVC a wɔapaw no hwɛ wɔ afiri ne nkuku a wɔpɛ sɛ wɔyɛ no so ansa na wɔayɛ no aguadi mu. Ɛsɛ sɛ wɔhwɛ sɛ forming uniformity, surface appearance, cavity definition, package rigidity ne sealing ahwehwɛde biara yɛ nokware wɔ sɔhwɛ no mu.

Mfiridwuma Ho Nwoma

PVC nkrataa a ɛwɔ hɔ dedaw a edidi so yi wɔ hɔ a wobetumi de ahwɛ. Yɛsrɛ sɛ si so dua sɛ krataa no fa nneɛma a wɔde retɔ no pɛpɛɛpɛ ho.

PVC Clear Krataa Data Krataa

PVC Rigid Sheet a ɛtumi hyew

PVC Grey Board Sɔhwɛ Amanneɛbɔ

PVC Clear Film Data Krataa a Wɔde Di Dwuma

PVC Krataa Sɔhwɛ Amanneɛbɔ

20mm Grey Board Sɔhwɛ Amanneɛbɔ

PVC Krataa a wɔde yɛ Offset Printing Sɔhwɛ Amanneɛbɔ

Application Mfonini ahorow

Nneɛma a Wɔde Gu Nneɛma Mu ne Nea Wɔde Kɔma

• Nhwɛsode a Wɔde Gu Mu: Wobetumi de PVC nhwɛsode a ɛyɛ den a ne kɛse yɛ A4 ahyɛ nkotoku ne nnaka a ɛbɔ ho ban mu.

• Roll Packaging: Bɛyɛ 50kg wɔ roll biara mu wɔ baabi a roll supply fa, anaasɛ sɛnea adetɔfo ahwehwɛde te.

• Pallet Packaging: Bɛyɛ 500–2000kg wɔ plywood pallet biara mu a egyina nneɛma nsusuwii ne packing nhyehyɛe so.

• Container Loading: Bɛyɛ tɔn 20 wɔ standard loading tebea mu, a ɛgyina roll anaa sheet dimensions ne packing nhyehyɛe a etwa to so.

• Nsɛm a Wɔde Ma: EXW, FOB, CNF ne DDU.

• Typical Lead Time: Bɛyɛ nnafua 10–14 wɔ deposit akyi, egyina specification ne order volume.

Adansedi nkrataa ne Nwoma a Ɛyɛ Paara

Ɛsɛ sɛ wɔde adansedi nkrataa a ɛwɔ hɔ ne sɔhwɛ nkrataa a ɛwɔ hɔ no hyia Frosted PVC grade pɔtee a wɔde rema no. Sɛ wo dwumadie no hwehwɛ sɛ wonya aduane a wɔde di nkitaho, nnuru a wɔabara anaa nkrataa pɔtee foforɔ a, fa gyinapɛn a wɔhwehwɛ no ka wo nsɛmmisa no ho.

Wiase Nyinaa Nneɛma a Wɔde Kyerɛkyerɛ

HSQY Plastic Group de wɔn ho hyɛ amanaman ntam ɔyɛkyerɛ ahorow mu de hyia wɔn a wɔyɛ nneɛma a wɔde kyekyere nneɛma, nnwumakuw a wɔyɛ thermoforming, wɔn a wɔkyekyɛ, wɔn a wɔdannan plastic ne adetɔfo afoforo a wɔyɛ adwumaden.

Nsɛm a Wɔtaa Bisa Fa 0.2mm Frosted PVC Sheet Ho

Nsonsonoe bɛn na ɛwɔ frosted PVC ne clear glossy PVC ntam?

Glossy PVC wɔ ade a ɛyɛ mmerɛw a ɛma hann na ɛma wotumi hu tẽẽ yiye. Frosted PVC de matte anaa textured surface di dwuma de trɛw reflections mu na ɛma ɛyɛ mmerɛw translucent hwɛbea.

So 0.2mm PVC fata ma thermoforming?

A 0.2mm rigid PVC grade a ɛfata betumi thermoformed ama wɔapaw hare packaging. Awiei koraa no fata gyina cavity bun, nkuku nhyehyɛe, forming ɔhyew, mfiri nhyehyɛe ne ahwehwɛde package rigidity.

So frosted PVC fata ma aduan a ɛne aduan di nkitaho?

Sɛnea ɛfata sɛ wɔde di dwuma wɔ aduan mu no gyina sɛnea wɔyɛ no pɛpɛɛpɛ ne sɛnea wɔpɛ sɛ wɔde bedi dwuma no so. Yɛsrɛ sɛ fa aduan ko, ɔhyew a wɔde di nkitaho, bere tenten a wɔde di nkitaho ne baabi a wɔrekɔ-gua a wɔhwehwɛ no ma sɛnea ɛbɛyɛ a wobetumi asusuw abasobɔde a ɛfata ne nkrataa a ɛwɔ hɔ ho.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Saa ade yi twe adwene si 0.2mm frosted PVC so. Wobetumi de PVC a ɛyɛ den a ɛfa nneɛma a wɔde kyekyere nneɛma ho no ama fi bɛyɛ 0.15mm kosi 1mm, a egyina ɔfasu, ne tɛtrɛtɛ ne ɔkwan a wɔfa so yɛ adwuma a wɔhwehwɛ no so.

So metumi apaw matte wɔ ɔfã biako na mapaw glossy wɔ ɔfã foforo?

Matte/matte, matte/glossy ne afoforo a wɔaka abom no betumi asusuw ho sɛnea wɔhwehwɛ sɛ ɛyɛ kɛse, tumi a wɔyɛ ne dodow a wɔkra.

So wobetumi ayɛ PVC krataa no kɔla sɛnea wɔpɛ?

Aane. Transparent, translucent, fitaa ne paw customized kɔla betumi asusuw sɛnea thickness, soro wie ne order dodow.

Dɛn ne ntrɛwmu a ɛsen biara a wobetumi anya?

PVC a ɛyɛ den a ɛwɔ hɔ dedaw no kyerɛw nkyerɛkyerɛmu a ɛsen biara a ɛtrɛw bɛyɛ 1280mm. Ɛsɛ sɛ wɔsi trɛw a etwa to a ɛwɔ hɔ no so dua ma 0.2mm frosted grade a wɔapaw no.

So wobetumi atintim PVC a wɔayɛ no frosted?

Wobetumi de PVC grades a ɛfata adi dwuma ne tintim akwan a ɛne no hyia. Ɛsɛ sɛ wɔhwehwɛ ink nhyehyɛe, ahoɔden a ɛwɔ soro, matte texture ne adhesion a ɛho hia mu ansa na wɔayɛ no kɛse.

So metumi abisa nhwɛsode ansa na makra?

Wobetumi aka nhwɛsode nneɛma ho asɛm sɛnea ɛwɔ hɔ kɛse, ɔfasu awie ne kɔla. Wɔ thermoforming nnwuma mu no, wɔkamfo kyerɛ sɛ wɔnsɔ nhwɛsode no hwɛ wɔ mfiri a wɔahyɛ da ayɛ no so ansa na wɔayɛ no kɛse.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

Mprempren MOQ a wɔakyerɛw no yɛ 1000kg. Kɔla ahorow a wɔayɛ no sɛnea wɔpɛ, nneɛma a ɛwɔ soro anaa nsusuwii soronko betumi ahwehwɛ sɛ wɔyɛ dodow a ɛba fam koraa a ɛsono.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Yɛsrɛ sɛ fa ne kɛse, ne trɛw anaa krataa kɛse, ne soro a wɔaka abom, kɔla, ɔkwan a wɔfa so yɛ anaa tintim, nneɛma a wɔde ahyɛ mu no nsusuwii a wɔawie, aduan a wɔde di nkitaho ahwehwɛde ahorow sɛ ɛfata a, dodow ne baabi a wɔrekɔ no ma.

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Group de PVC krataa ne sini a ɛyɛ den ma thermoforming, packaging, printing, folding boxes ne industrial conversion. Nneɛma a ɛwɔ hɔ no bi ne PVC grades a emu da hɔ, kɔla, matte, frosted ne dwumadie pɔtee bi ma wɔn a wɔyɛ, converters ne distributors.

Wɔ frosted PVC packaging nnwuma, HSQY betumi asusuw thickness, trɛw, krataa anaa roll nsusuwii, matte soro nkabom, kɔla, forming ahwehwɛde, nhwɛsode, mfiridwuma nkrataa, packing ne bulk supply sɛnea adetɔfo no application.