Takardar PVC mai sanyi 0.2mm don Marufi Abinci

Takardar PVC mai sanyi 0.2mm don Marufi Abinci

An ƙera takardar PVC mai kauri mai siffar HSQY 0.2mm don marufi mai tsari mai zafi, kayan marufi masu haske da haske, akwatunan naɗewa da sauran aikace-aikacen marufi waɗanda ke buƙatar saman matte ko mai kauri maimakon gamawa mai sheƙi na yau da kullun.

Fuskar da aka yi da sanyi tana ba da kyawun gani, tana rage hasken kai tsaye kuma tana taimakawa wajen rage ganin yatsun hannu da ƙananan alamun saman yayin da take riƙe da ɗan ganuwa daga samfurin. Ana iya samar da launuka masu haske, masu haske da aka zaɓa bisa ga ƙirar marufi da ake buƙata.

Wannan samfurin yana da kauri mai girman 0.2mm, yayin da takamaiman takaddun PVC masu tsauri za a iya samar da su daga kimanin 0.15mm zuwa 1mm bisa ga hanyar ƙira, faɗi, ƙarewar saman da buƙatun amfani da ƙarshen amfani. Girma da faɗi na musamman suna samuwa ga masu canza kaya da masana'antun marufi.

Don aikace-aikacen kai tsaye ko a kaikaice na abinci, dole ne a tabbatar da ainihin tsarin PVC da takaddun tallafi bisa ga abincin da aka shirya, yanayin hulɗa da buƙatun kasuwa kafin amfani da shi a kasuwanci.

Hotunan Samfurin Takardar PVC Mai Sanyi

Bayani dalla-dalla na Takardar PVC mai sanyi 0.2mm

*Yawa, ƙarfin tauri da ƙimar tasiri ƙimomin tunani ne daga ƙayyadaddun tsarin iyali na PVC mai ƙarfi na HSQY. Ya kamata a tabbatar da ƙimar ƙarshe don ainihin ƙimar 0.2mm mai sanyi kafin siyan.

Menene Takardar PVC Mai Sanyi?

Takardar PVC mai sanyi abu ne mai tauri ko mara tsauri wanda ke da matte ko textured wanda ke watsa hasken da ke haskakawa kuma yana rage bayyanar PVC mai sheƙi sosai.

Dangane da yanayin saman da kuma yadda aka tsara kayan, ƙarshen zai iya kasancewa daga matte da haske kaɗan zuwa ga kamannin da ya fi kama da sanyi. Wannan yana bawa masu tsara marufi damar haɗa ɗanɗanon samfurin tare da bayyanar saman mai laushi.

Don aikace-aikacen marufi, ana iya samar da kayan a cikin kauri, faɗi da kuma ƙarewar saman da aka zaɓa kuma a canza su ta hanyar thermoforming, vacuum forming, yankewa, naɗewa ko wasu hanyoyin da suka dace.

Amfanin Fa'idodin Faɗin PVC Mai Sanyi ko Matte

• Rage Haske Kai Tsaye: Fuskar da aka yi da sanyi tana haifar da laushi fiye da PVC mai haske na yau da kullun.

• Ganuwa Mai Sarrafa: Maki mai haske ko mai haske na iya kiyaye gani kaɗan yayin da yake rage cikakken bayyanar PVC mai gogewa.

• Ganuwa a Ƙananan Yatsun Yatsu: Tsarin rubutu mai laushi na iya sa a rage ganin yatsu da ƙananan alamun saman yayin sarrafawa.

• Bayyanar Marufi: Fuskokin da suka yi sanyi suna ba da gabatarwa ta gani da ta taɓawa daban-daban don marufi na dillalai.

• Ƙarfin Tsarin Thermoforming: Ana iya dumama matakan da suka dace kuma a samar da su zuwa ramukan marufi akan kayan aiki masu dacewa.

• Zaɓuɓɓukan Fuskar da Aka Keɓance: Ana iya kimanta matte/matte, matte/mai sheƙi ko wasu haɗuwa masu laushi bisa ga yanayin da ake buƙata.

• Girman Musamman: Kauri, girman takardar, faɗi da launi za a iya daidaita su da buƙatun canzawa da marufi.

Zaɓuɓɓukan aiki kamar anti-static, daidaita UV, aikin harshen wuta, tsarin hulɗa da abinci ko maganin bugu na musamman yana buƙatar takamaiman maki na aikace-aikace kuma ya kamata a haɗa su cikin ƙayyadaddun samfurin da aka amince da shi.

PVC 0.2mm don Marufi Mai Tsarin Thermoformed

Da kauri kusan 0.2mm, PVC mai tauri ya dace da zaɓaɓɓun aikace-aikacen marufi masu sauƙi inda ake buƙatar siririn yanar gizo. Daidaiton ainihin ya dogara da yanayin rami, rabon jawowa, taurin fakiti, zafin tsari, saitunan injin da buƙatun aikin fakitin da aka gama.

Ga ramuka masu zurfi ko fakitin da ke buƙatar ƙarin tauri, ana iya buƙatar kayan da suka fi kauri. Masu siye ya kamata su ba da girman fakitin da aka gama da zurfin da aka samar lokacin da suke neman shawarwarin kayan.

Aikace-aikacen Marufi na Abinci

Marufin Samarwa

Ana iya kimanta ma'aunin da ya dace da abinci don marufin samfurin da aka yi da zafi inda ƙirar marufin ke buƙatar tsari mai tsauri da kuma kamannin matte ko frosted.

Marufi na Gidan Burodi da Kayan Ƙamshi

Ana iya amfani da PVC mai sanyi don zaɓaɓɓun aikace-aikacen yin burodi, kayan zaki, kayan sakawa da kuma shirya kayan kwalliya bayan tabbatar da buƙatun hulɗa da abinci da yanayin zafin samfurin da aka shirya.

Tire da Sakawa na Thermoformed

Ana iya ƙirƙirar matakan PVC masu ƙarfi waɗanda suka dace su zama tire, abubuwan sakawa da sauran abubuwan marufi. Ya kamata a zaɓi kauri gwargwadon zurfin rami, tauri da buƙatun sarrafawa.

Akwatunan Naɗewa da Tagogi Masu Marufi

Ana iya amfani da PVC mai laushi ko kuma mai sanyi don akwatunan naɗewa, tagogi masu haske da kayan kwalliya na ado inda ake fifita bayyanar haske.

Bukatun Saduwa da Abinci

Ba kowane nau'in PVC mai tauri ko mai sanyi ba ne ya kamata a yi masa la'akari da shi ta atomatik a matsayin wanda ya dace da taɓa abinci kai tsaye. Dacewar taɓa abinci ya dogara ne da cikakken tsari, ƙarin abinci, abincin da aka shirya, tsawon lokacin taɓawa, zafin hulɗa da kuma buƙatun kasuwar da za a je.

Don ayyukan shirya abinci, a bayar da nau'in abincin da aka nufa, ko da kuwa ya shafi kai tsaye ne ko a kaikaice, zafin da ake sa ran adanawa, tsawon lokacin da zai ɗauka da kuma takaddun da ake buƙata yayin neman farashi.

Ya kamata a tabbatar da takaddun shaida, sanarwa ko rahotannin gwaji da ake da su ta hanyar amfani da tsarin PVC mai frosted 0.2mm wanda aka bayar maimakon a yi amfani da shi gabaɗaya ga kowane samfurin PVC.

Yadda Ake Keɓance PVC Mai Sanyi Don Layin Marufi Naka

Don shirya takamaiman kayan da kuma kimantawa, samar da waɗannan bayanai:

• Kauri da ake buƙata, kamar 0.2mm

• Faɗin takardar ko birgima da ake buƙata

• Tsawon takardar ko girman birgima

• Matte/matte, matte/mai sheƙi ko wani saman da ake buƙata

• Launi mai haske, mai haske, fari ko na musamman

• Tsarin gyaran thermoforming, injin tsaftacewa, naɗewa ko bugawa

• Girman kunshin da aka gama

• Zurfin samarwa

• Samfurin da aka fakiti

• Yanayin hulɗa kai tsaye ko a kaikaice tsakanin abinci da abinci idan ya dace

• Takardun bin ƙa'idodi da ake buƙata

• Adadin oda

• Ƙasa ko tashar jiragen ruwa da ake zuwa

Ga sabbin ayyukan thermoforming, ana ba da shawarar gwada PVC da aka zaɓa akan injin da aka yi niyya da mold kafin a samar da shi a kasuwa. Ya kamata a tabbatar da daidaito, bayyanar saman, ma'anar rami, taurin fakitin da duk wani buƙatun rufewa yayin gwajin.

Takardun Fasaha

Ana iya samun waɗannan takardun PVC ɗin da ke akwai don amfani. Da fatan za a tabbatar cewa takardar ta shafi ainihin ƙimar kayan da ake saya.

Takardar Bayanan Takardar PVC Mai Tsabta

Flammability na PVC Tauri Sheet

Rahoton Gwajin Allon Laushi na PVC

Takardar Bayanan Fim ta PVC Bayyana

Rahoton Gwajin Takardar PVC

Rahoton Gwajin Allon Toka Mai 20mm

Rahoton Gwajin Buga Takardar PVC don Biyan Kuɗi

Hotunan Aikace-aikace

Marufi da Isarwa

• Samfurin Marufi: Ana iya saka samfuran PVC masu ƙarfi na girman A4 a cikin jakunkuna masu kariya da kwali.

• Marufin Naɗi: Kimanin kilogiram 50 a kowace naɗi inda ake buƙatar naɗi, ko kuma bisa ga buƙatun abokin ciniki.

• Marufin Pallet: Kimanin kilogiram 500-2000 a kowace pallet ɗin plywood ya danganta da girman kayan da kuma tsarin marufi.

• Loda Kwantena: Kimanin tan 20 a ƙarƙashin yanayin lodi na yau da kullun, ya danganta da girman birgima ko takarda da kuma tsarin marufi na ƙarshe.

• Sharuɗɗan Isarwa: EXW, FOB, CNF da DDU.

• Lokacin Gudanarwa na yau da kullun: Kimanin kwanaki 10-14 bayan ajiya, ya danganta da ƙayyadaddun bayanai da girman oda.

Takaddun shaida da Takardun Inganci

Ya kamata a daidaita takaddun shaida da takardun gwaji da ake da su daidai da matakin PVC da aka bayar. Idan aikinku yana buƙatar abinci, abubuwan da aka iyakance ko wasu takamaiman takardu, haɗa ma'aunin da ake buƙata tare da bincikenku.

Nunin Duniya

HSQY Plastic Group tana shiga cikin baje kolin kasa da kasa don ganawa da masana'antun marufi, kamfanonin thermoforming, masu rarrabawa, masu canza filastik da sauran masu siye kwararru.

Tambayoyin da Ake Yawan Yi Game da Takardar PVC Mai Sanyi 0.2mm

Mene ne bambanci tsakanin PVC mai sanyi da PVC mai sheƙi?

PVC mai sheƙi yana da santsi mai haske kuma yana ba da haske kai tsaye. PVC mai sheƙi yana amfani da matte ko textured surface don yaɗa haske da kuma ƙirƙirar kamanni mai laushi.

Shin PVC 0.2mm ya dace da thermoforming?

Ana iya yin amfani da marufi mai ƙarfi na PVC mai girman 0.2mm mai kyau don zaɓar marufi mai sauƙi. Dacewar ƙarshe ta dogara ne akan zurfin rami, ƙirar mold, zafin tsari, saitunan injin da kuma ƙarfin fakitin da ake buƙata.

Shin PVC mai sanyi ya dace da taɓa abinci?

Dacewar hulɗa da abinci ya dogara ne akan ainihin tsari da kuma yadda ake amfani da shi. Da fatan za a bayar da nau'in abincin, zafin hulɗa, tsawon lokacin hulɗa da kuma buƙatar kasuwar da za a je domin a tantance matakin da ya dace da kuma takaddun da ake da su.

Wadanne kauri ake samu?

Wannan samfurin ya fi mayar da hankali kan PVC mai sanyi 0.2mm. Ana iya samar da takamaiman takaddun PVC masu tsauri waɗanda suka shafi marufi daga kimanin 0.15mm zuwa 1mm, gwargwadon yanayin da ake buƙata, faɗinsa da hanyar sarrafawa.

Zan iya zaɓar matte a gefe ɗaya da kuma mai sheƙi a ɗayan gefen?

Ana iya tattauna haɗuwar saman da aka yi da matte/matte, matte/mai sheƙi da sauran su bisa ga kauri da ake buƙata, ƙarfin samarwa da kuma adadin oda.

Za a iya yin amfani da launi na takardar PVC don yin ado da takardar PVC?

Eh. Za a iya kimanta launuka masu haske, masu haske, fari da aka zaɓa bisa ga kauri, ƙarewar saman da adadin oda.

Menene matsakaicin faɗin da ake da shi?

Takamaiman ƙayyadaddun bayanai na PVC da ke akwai sun lissafa matsakaicin faɗin da aka yi amfani da shi na kimanin 1280mm. Ya kamata a tabbatar da faɗin da ake da shi na ƙarshe don matakin frosted 0.2mm da aka zaɓa.

Za a iya buga PVC mai sanyi?

Ana iya amfani da matakan PVC masu dacewa tare da hanyoyin bugawa masu jituwa. Ya kamata a tantance tsarin tawada, ƙarfin saman, yanayin matte da mannewa da ake buƙata kafin a samar da su da yawa.

Zan iya neman samfurin kafin yin oda?

Ana iya tattauna samfurin kayan bisa ga kauri da ake da shi, ƙarewar saman da kuma launi. Don ayyukan thermoforming, ana ba da shawarar gwada samfurin akan kayan aikin da aka nufa kafin a samar da shi da yawa.

Menene mafi ƙarancin adadin oda?

MOQ ɗin da aka lissafa a yanzu shine 1000kg. Launuka na musamman, yanayin saman ko girma na musamman na iya buƙatar ƙananan adadin samarwa daban-daban.

Wane bayani ya kamata in bayar don yin ƙiyasin farashi?

Don Allah a samar da kauri, faɗi ko girman takarda, haɗin saman, launi, tsari na ƙirƙira ko bugawa, girman fakitin da aka gama, buƙatun hulɗa da abinci idan ya dace, adadi da wurin da za a je.

Game da Ƙungiyar Roba ta HSQY

Kamfanin HSQY Plastic Group yana samar da takardar PVC mai ƙarfi da fim don yin thermoforming, marufi, bugawa, akwatunan naɗewa da kuma canza masana'antu. Kayayyakin da ake da su sun haɗa da ma'aunin PVC mai haske, mai launi, matte, mai sanyi da kuma takamaiman aikace-aikace ga masana'antun, masu juyawa da masu rarrabawa.

Ga ayyukan marufi na PVC masu sanyi, HSQY na iya tattauna kauri, faɗi, girman takarda ko nadi, haɗuwar saman matte, launi, buƙatun tsari, samfura, takardun fasaha, marufi da wadatar kayayyaki gwargwadon aikace-aikacen abokin ciniki.