Famasiutik PVC Blister Film fɔ Kapsul ɛn Tablɛt

Famasiutik PVC Blister Film fɔ Kapsul ɛn Tablɛt

HSQY famasitik PVC rigid film na thermoformable fɔm matirial fɔ kapsul, tablɛt ɛn ɔda kwalifay sɔlid-dos blista pak. Di film de saplae insay rol fɔ kɔmpitabl famasitik blista pak layn dɛn ɛn dɛn kin kɔstɔmayz am akɔdin to tik, slit wit, kɔlɔ, rol dimɛnshɔn ɛn prɔsesin rikwaymɛnt.

Di prodakt rεnj we de naw de kכba lεk 0.1mm to 1.5mm tiknes, transparent כ kכla mεtirial εn wan 76mm rεfrεns insay kכr. Plɛn rigid PVC fayn fɔ bɔku standad blista aplikeshɔn dɛn, we mɛrɛsin dɛn we nid mɔ mɔstɔ ɔ ɔksijɛn protɛkshɔn kin nid PVC/PVDC ɔ ɔda kwalifay ay-baria strɔkchɔ.

Fɔ famasitik pak projɛkt, di fɔm film fɔ pik togɛda wit di kapsul ɔ tablɛt kwaliti, blista kaviti dizayn, lidin matirial, siling kɔndishɔn, rikwayd barɛri lɛvɛl, pak ikwipmɛnt ɛn aplikebul kwalifayeshɔn rikwaymɛnt.

Famasiutik PVC Film Spɛsifikeshɔn dɛn

Farmasi PVC Rigid Film Prodakt Imej dɛn

Aw Dɛn De Yuz PVC Blista Film insay Famasiutik Pakɛj

Famasiutik rigid PVC de yuz as di fכm wεb insay tεmכfכm blista pak. We dɛn de mek di rol, dɛn kin pul di rol ɛn ɔt am bifo dɛn mek di kaviti dɛn bay vaykum, prɛshɔn ɔ ɔda kɔmpitabl tɛmfɔmin we.

afta dat dεn kin put kapsul כ tablεt dεm insay di kכva dεm we dεn fכm. Dɛn kin put wan kɔmpatib famasitik lidin matirial ɛn sial am na di fɔm wɛb bifo dɛn kɔd di blista pak dɛn, pɔrfɔt ɔ kɔt dɛn akɔdin to di validet pak prɔses.

Ki Ficha dɛn fɔ Famasiutik PVC Blister Film

• Thermoforming Performance: Dɛn kin fɔm fayn fayn famasitik PVC gred dɛn to kɔnsistɛns blista kaviti fɔ kapsul ɛn tablɛt.

• Dimensional Stability: Rigid PVC de gi strכkchכral sכpכt fכ di fכm blista wεb εn finish blista kad.

• Prodakt Visibiliti: Transparent PVC de alaw fɔ si di inspekshɔn fɔ di pak doz fɔm.

• Di Kɔlɔ Opshɔn dɛn: Dɛn kin tɔk bɔt di tin dɛn we gɛt kɔlɔ fɔ no pɔsin ɔ fɔ mek dɛn no di patikyula tin dɛn we dɛn nid fɔ mek di paket.

• Rol Prosesin: Dɛn kin gi matirial fɔ kɔmpitabl kɔntinyu blista pak ikwipmɛnt.

• Kastom Slitin: Yu kin kɔnfigyut di rol wit akɔdin to di wɛb wit we dɛn nid ɛn di prodakshɔn spɛsifikɛshɔn.

• Bɔku Barɛri Opshɔn dɛn: Dɛn kin ebul fɔ evaluate plein PVC ɔ ay-baria PVC-based strɔkchɔ dɛn akɔdin to di sɛnsitiviti fɔ di mɛrɛsin we dɛn pak.

Barɛri pefɔmɛns fɔ pik akɔdin to di prɔdak stebiliti data. Plɛn rigid PVC kin jɔs yuz usay standad protɛkshɔn na infεkt, we di mכsichכ-sεnsitiv כ כksijεn-sεnsitiv fכmasyutik prodakt dεm kin nid wan mεtirial we hכy-baria.

PVC Blister Film Barɛri Opshɔn dɛn

Fɔ pik di strɔkchɔ we gɛt di ays-baria nɔ kin nid ɔltɛm. Pakɛj sɛlɛkshɔn fɔ tink bɔt doz-fɔm stebiliti, shelf layf we dɛn nid, klaymat, kaviti dimɛnshɔn, pak layn pefɔmɛns, matirial kɔst ɛn kwalifayeshɔn rikwaymɛnt.

Aplikeshɔn dɛn fɔ Famasiutik PVC Film

Kapsul Blister Pak we dɛn kin yuz

Famasiutik rigid PVC kin evalyu fɔ had-kapsul ɛn ɔda kwalifay kapsul blista pak. di dimεnshכn dεm na di kכpsul, di dip we di kaviti, fכm tεmprachכ εn di barεri pεrformεns we dεn nid fכ tink bכt we dεn de difayn di film spεsifikεshכn.

Tablɛt Blister Pakɛj

Rigid PVC na tin we dɛn kin yuz as tɛmɔfɔmin wɛb fɔ tablɛt blista pak usay prɔdak visibiliti, dimɛnshɔnal stebiliti ɛn efishɔnal fɔm pefɔmɛns nid fɔ de.

Nyutrasiutik ɛn Ɛlthkɛr Blisters

Dɛn kin ebul fɔ evalyu di gred dɛn we dɛn dɔn pik bak fɔ vaytamɛn, sɔpɔt ɛn ɔda sɔlid-dos wɛlbɔdi prɔdak dɛn afta dɛn dɔn kɔnfɔm di prɔdak kɔmpitibliti, barɛri rikwaymɛnt ɛn aplikebul pak standad.

Higher-Barrier Famasiutik Pakɛj

Fɔ fɔmyulashɔn dɛn we nid fɔ inkrisayz mɔstɔ ɔ ɔksijɛn protɛkshɔn, dɛn kin ebul fɔ evaluate PVC/PVDC ɔ ɔda kwalifay ay-baria strɔkchɔ instead ɔf standad mono PVC.

Famasitik Pakɛj Aplikeshɔn Imej dɛn

Standard vs Dip-Kaviti Blister Rikwaymɛnt dɛn

Standart tablεt dεm wit rili shalo blista kεviti dεm jεnarali de put difrεn fכm dimand pan PVC film pas big kapsul, big fכmat tablεt כ dip kaviti. So dɛn fɔ pik di tik we di film tik, di fɔmyulashɔn ɛn di fɔm winda akɔdin to di aktual blista jɔyometri ɛn di pak layn.

Fɔ dip ɔ mɔ kɔmpleks kaviti, kɔstɔma dɛn fɔ gi kaviti dimɛnshɔn ɛn mashin infɔmeshɔn so dat fɔm pefɔmɛns kin ebul fɔ evalyu bifo kɔmɛshɔnal prodakshɔn.

Infɔmeshɔn we dɛn nid fɔ mek wan Famasiutik PVC Film Kɔt

Fɔ no mɔ kot ɛn fɔ ebul fɔ no di tin dɛn we yu de yuz, duya gi bɔku pan dɛn tin ya as yu ebul:

• Matirial strɔkchɔ we dɛn nid: plein PVC, PVC/PVDC ɔ ɔda strɔkchɔ

• Nominal tik ɛn tolɛreshɔn

• Di slit wit we dɛn nid

• Kor dayamita

• Maksimal rol dayamita

• Di wet we dɛn nid fɔ rol ɔ di lɔng we di rol gɛt

• Winding dairekshɔn if dɛn spɛsifa am

• Matirial we transparent ɔ we gɛt kɔlɔ

• Kapsul ɔ tablɛt dimɛnshɔn dɛn

• Blister cavity dimɛnshɔn ɛn fɔm dip

• Blister pak mashin model

• Lidding matirial we dɛn yuz wit di blista

• Di mɔstɔ ɔ ɔksijɛn barɛri lɛvɛl we dɛn nid

• Di dɔkyumɛnt dɛn we dɛn nid fɔ pak fɔ mek mɛrɛsin

• Initial ɔda kwantiti ɛn ɛstimat ɛni ia kɔnsɔmshɔn

• Di kɔntri ɔ makit usay dɛn de go

Fɔ nyu pak projɛkt, dɛn fɔ evalyu di trial matirial na di blista pak layn we dɛn want bifo dɛn gi dɛn kɔmɛshɔnal aprɔval. Impɔtant chɛk dɛn inklud film fidin, ɔt, kaviti difinishɔn, fɔm yunifom, siling kɔndishɔn, finish blista intɛgriti ɛn prodak stebiliti.

Famasiutik Kwaliti ɛn Dokumɛnt

Famasiutik blista pak nid prodak-spɛsifi k kwalifayeshɔn. Kwaliti-mɛnejmɛnt sɛtifiket dɛn nɔmɔ nɔ fɔ trit as pruf se ɛvri PVC fɔmyulashɔn fayn fɔ ɛvri famasitik prodak ɔ dɛstineshɔn makit.

Di wan dɛn we de bay fɔ sho di standad we dɛn nid fɔ pak di famasi ɛn di dɔkyumentri pakej we dɛn de du tɛknikal ɛvalueshɔn. Di spɛsifikɛshɔn dɛn we de, batch infɔmeshɔn, tɛst ripɔt ɛn sɔpɔt dɔkyumɛnt dɛn fɔ mach wit di ɛksaktɔl matirial gred we dɛn gi.

PVC Film Pak Ditel

• Sampul Pak: A4-sayz rigid PVC sampul sheet dɛn kin pak insay protɛktiv bag ɛn katon.

• Shit Pak: Na lɛk 30kg fɔ wan paket ɔ akɔdin to di pak we dɛn gri fɔ pak.

• Palet Palet: Na lɛk 500–2000kg pan wan plai wud palet dipen pan di prɔdak kɔnfigyushɔn.

• Kɔntinɛnt Lod: Na lɛk 20 tan ɔnda standad lod kɔndishɔn, we de ɔnda di fayn dimɛnshɔn ɛn pak kɔnfigyushɔn.

• Tipik Lid Taym: Na lɛk 10–14 wok dez, we de ɔnda di spɛsifikɛshɔn ɛn ɔda volyum.

• Dilivri Tɛm: EXW, FOB, CNF ɛn DDU.

Sɛtifiket ɛn Kwaliti Dokumɛnt dɛn

Dɛn fɔ chɛk di sɛtifiket ɛn kwaliti dɔkyumɛnt dɛn we de agens di rayt matirial gred, di say we dɛn mek am ɛn di tin dɛn we dɛn nid fɔ pak di famasi. Duya gi yu di dɔkyumɛnt list we yu nid we yu de ɛvaluet di prɔjek.

Globɛl Ɛgzibishin dɛn

HSQY Plastic Group de tek pat pan intanashɔnal ɛgzibishin fɔ mit famasi pak manifakta dɛn, plastic kɔnvɔta dɛn, distribyushɔn ɛn ɔda pɔshɔnal bayer dɛn.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Famasiutik PVC Blista Film

Wetin na famasitik PVC blista film?

Famasiutik PVC blista film na rigid thermoformable matirial we dɛn kin yuz as di fɔm wɛb fɔ kapsul, tablɛt ɛn ɔda kwalifay sɔlid-dos blista pak.

Yu kin yuz rigid PVC film fɔ pak kapsul blista?

Yɛs. Suitabl fכmasiutik PVC film kin tεmכfכm insay kכva fכ kapsul. Film tiknes, fכmyuleshכn εn fכm kכndishכn dεm fכ mεch to kapsul saiz, kaviti dip εn pak ikwipεnt.

Us tik tik dɛn de?

Di prodakt rεnj we de naw de kכba lεk 0.1mm to 1.5mm. Di fainal tiknes fɔ kɔnfyus akɔdin to di blista dizayn, fɔm dip ɛn validet pak spɛsifikɛshɔn.

Wetin na di difrɛns bitwin PVC ɛn PVC/PVDC blista film?

Plɛn PVC de gi standad thermoforming ɛn besik barɛri pefɔmɛns. PVC/PVDC ad wan PVDC barɛri layt fɔ impɔtant protɛkshɔn agens mɔstɔ ɛn ɔksijɛn fɔ famasi prodakt dɛn we nid mɔ envayrɔmɛnt protɛkshɔn.

Yu tink se plain PVC fayn fɔ ɛvri tablɛt ɔ kapsul?

Nɔ. Dɛn fɔ pik di fim we de fɔm akɔdin to di prɔdak stebiliti ɛn di shelf layf we dɛn nid. di prodakt dεm we rili sεnsitiv fכ mכsichכ כ כksijεn-sεnsitiv kin nid fכ gεt strכkchכ we hכy-baria.

Yu tink se dɛn kin kɔstɔmayz PVC fim fɔ dip blista kaviti dɛn?

di mεtirial fכ dip כ mכr komplεks kεviti dεm kin evaluate akɔdin to di kaviti dimεnshכn, tiknes, fכm tεmprachכ εn mashin kכndishכn. Gi yu blista drɔin ɔ kaviti dimɛnshɔn we yu de aks fɔ ɛvalueshɔn fɔ di matirial.

Yu tink se dɛn kin kɔstɔmayt di rol wit?

Yɛs. Rol width kin kɔstɔmayz akɔdin to prodakshɔn kapabiliti ɛn blista-mashin rikwaymɛnt. Duya gi di slit wit we yu nid, di kɔr dayamita, di rol dayamita ɛn di rol wet.

Us kɔr dayamita de?

Di kɔrɛnt prodak spesifikeshɔn de list wan 76mm insay kɔr dayamita. Ɔda rol spɛsifikɛshɔn dɛn fɔ kɔnfɔm akɔdin to di kɔstɔma in ikwipmɛnt.

Wetin na di minimum ɔda kwantiti?

Di MOQ we de na di list naw na 1000kg. Kastomayz kɔlɔ, spɛshal wit, barɛri strɔkchɔ ɔ ɔda nɔ-standad spɛsifikɛshɔn kin nid difrɛn minim prodakshɔn kwantiti.

A kin aks fɔ sampul fɔ blista mashin tɛst?

Dɛn kin tɔk bɔt sampul matirial akɔdin to di gred we dɛn nid, tiknɛs ɛn di stok we de. I fayn fɔ tɛst di matirial pan di blista layn we dɛn want bifo dɛn gri fɔ di kɔmɛshɔn.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di matirial strɔkchɔ, tik, slit wit, kɔr dayamita, rol dimɛnshɔn, kɔlɔ, kapsul ɔ tablɛt saiz, blista kaviti dip, mashin mɔdel, barɛri rikwaymɛnt, dɔkyumɛnt dɛn we dɛn nid, kwantiti ɛn ples fɔ go.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae rigid PVC film ɛn rilat plastic matirial fɔ famasitik, mɛdikal, pak ɛn industrial aplikeshɔn. Di prodak dɛm we de inklud plein rigid PVC ɛn sɛlɛkɛt PVC-based barɛri strɔkchɔ fɔ difrɛn tɛmfɔmin ɛn protɛkshɔn rikwaymɛnt.

Fɔ famasitik blista projɛkt, HSQY kin tɔk bɔt di film tik, slit wit, rol kɔnfigyushɔn, kɔlɔ, fɔm rikwaymɛnt, barɛri strɔkchɔ, sɛmpul, kwaliti dɔkyumɛnt, pak ɛn bɔlk-ɔda rikwaymɛnt akɔdin to di kɔstɔma in pak layn.