Embossed anaa Frosted anaa Inkjet PVC Krataa a wɔde yɛ Plastic Kaad

Embossed, Frosted ne Inkjet PVC Krataa a wɔde yɛ Plastic Kaad

HSQY embossed, frosted ne inkjet PVC nkrataa yɛ plastic card nneɛma a ɛyɛ den a wɔayɛ ama card manufacturers, aguadi printers, converters ne distributors a ɛhwehwɛ sɛ ɛsono sɛnea ɛte wɔ soro ne printing su.

Mprempren nneɛma nhyehyɛe no gyina 0.3mm PVC krataa a wɔahyɛ da ayɛ so , a ne nsusuwii akɛse yɛ 500 × 765mm ne 700 × 1000mm . Wobetumi asusuw nsusuwii ahorow a wɔahyɛ da ayɛ ho sɛnea mfiri a wɔde tintim, kaad nhyehyɛe, lamination nhyehyɛe ne ahwehwɛde a wɔde twa.

Nsusuwii ahorow a ɛwɔ soro no bi ne embossed anaa aburow nkyerɛwee, frosted anaa matte anim ne application-specific inkjet-printable coatings . White ne standard base kɔla, bere a wobetumi apaw amanne kɔla ahorow ahwɛ sɛ ɛfata production orders.

Ɛsɛ sɛ wɔpaw ɔfasu a ɛfata sɛnea kaad no hwɛbea a wɔahyɛ da ayɛ, tintim mfiridwuma, ink nhyehyɛe, lamination nhyehyɛe ne kaad a wɔawie ahwehwɛde ahorow te. Inkjet, offset ne tintim akwan afoforo betumi ahwehwɛ sɛ wɔyɛ nneɛma ahorow wɔ soro na ɛsɛ sɛ wosi so dua wɔ ɔkwan soronko so.

Dɛn ne Embossed, Frosted ne Inkjet PVC Kaad Nkratafa?

Saa nneɛma yi yɛ PVC nkrataa a ɛyɛ den a wɔde ma sɛ nneɛma a wɔde yɛ kaad a wɔmfa nhyehyɛ mu sen sɛ wɔde bɛyɛ plastic kaad a wɔawie. Wobetumi apaw ayaresa ahorow a wɔde yɛ ɔfasu no a egyina sɛ ebia adwuma no hwehwɛ sɛ wɔde nsa ka, wɔatew soro hann so anaasɛ wɔde kata so a wotumi tintim ma inkjet mfiri a ɛne no hyia.

PVC Kaad Krataa a wɔakyerɛw so

Embossed PVC wɔ controlled surface texture a wɔbɔ bere a wɔreyɛ. Grain, line anaa textured patterns afoforo betumi ama tactile finish ne soronko visual appearance ama membership cards, promotional cards ne specialty card products.

Frosted PVC Kaad Krataa

Frosted PVC ma ɛyɛ mmerɛw, ɛnyɛ nea ɛhyerɛn sen nea ɛhyerɛn kɛse. Ɛdenam sɛnea wɔayɛ no so no, ebetumi ayɛ nea ɛnyɛ hann anaasɛ ɛwɔ anim a ɛtrɛw a ɛyɛ hann. Ɛsɛ sɛ wɔde honam fam nhwɛsode na ɛpene ahum ne aniwa so nkɛntɛnso a wɔhwehwɛ no so.

Inkjet Printable PVC Kaad Krataa

PVC a wotumi tintim wɔ inkjet mu no de aduru a wɔde kata so a wɔayɛ no sɛnea ɛbɛyɛ a wobenya inkjet ink a ɛne no hyia di dwuma. Ɛsɛ sɛ wɔsɔ printa model, ink chemistry, coating, drying ne lamination hwɛ sɛ production system biako ansa na wɔde adi dwuma kɛse.

PVC Card Sheet Nneɛma a Wɔde Yɛ Mfonini

Embossed, Frosted ne Inkjet PVC Krataa no ho nsɛm

Nneɛma a edidi so yi de adetɔ ho nkyerɛkyerɛmu ma mprempren HSQY kaad-nneɛma nhyehyɛe no. Ɛsɛ sɛ wɔsi embossing nhwɛsoɔ pɔtee, frosted hwɛbea, inkjet coating ne printing compatibility so dua ma product specification a wɔapaw no.

Embossed vs Frosted vs Inkjet PVC Kaad Krataa

Embossed PVC Surface Nneɛma a Wɔpaw

Embossing sesa PVC no ani honam fam nwene na ebetumi anya kaad no hwɛbea, ne nsa ne ne tintim suban so nkɛntɛnso. Ɛsɛ sɛ adetɔfo pene sɛnea wɔayɛ no ankasa so sen sɛ wɔde wɔn ho bɛto mfonini anaa screen so nhwɛso nkutoo so.

Aburow a Ɛyɛ Fɛ

Aburow a ɛyɛ fɛ ma ɛyɛ anifere bere a ɛkura aniwa a ɛyɛ pɛ kakra no. Ebia ɛfata ma asɔremma, nokwaredi ne nsɛm a wɔde hyɛ nkurɔfo nkuran wɔ baabi a wɔpɛ sɛ wɔde nsa ka tumi a wɔayɛ no yiye.

Aburow a Ɛyɛ Kɔkɔɔ

Nkyerɛwee a emu dɔ anaasɛ ɛyɛ mmerɛw ma wonya tumi a ɛda adi kɛse wɔ nsa a wɔde ka ade ho. Wɔkamfo tintim ne lamination sɔhwɛ ahorow kyerɛ efisɛ ɔfasu no mu dɔ betumi anya mfonini no hwɛbea ne nkitahodi a ɛda kaad ntoatoaso ntam so nkɛntɛnso.

Amanneɛbɔ Texture

Wɔ nnwuma a ɛhwehwɛ sɛ wɔyɛ nwene pɔtee bi ho no, adetɔfo betumi de honam fam nhwɛsode a wɔde gyina so ama de asusuw nneɛma a wɔyɛ ho. Pattern feasibility gyina nneɛma thickness, embossing nhyehyɛe ne order dodow.

Frosted PVC Kaad Krataa a Ɛda adi

Nsukyenee a ɛwɔ soro no trɛw hann a ɛdannan anaasɛ ɛde kɔ baabi foforo no mu na ɛma ɛyɛ mmerɛw sen nea wɔayɛ no fɛfɛɛfɛ a ɛhyerɛn. Wobetumi de frosting adi dwuma de ayɛ low-glare effect anaasɛ semi-translucent visual style a egyina base PVC grade so.

Opaque Frosted White a Ɛyɛ Fɛ a Ɛyɛ Fɛ

Opaque frosted white PVC ma subdued white background a ɛfata ma printed cards baabi a ɛsɛ sɛ wɔtew surface reflection tẽẽ.

Translucent Frosted Ayɛyɛdeɛ

Wobetumi asusuw PVC nnuru a wɔapaw ho wɔ baabi a ɛho hia sɛ wonya diffused translucent effect. Ɛsɛ sɛ wɔpene ahum a etwa to ne nea ɛda adi pefee so wɔ nea wɔyɛ no kɛse ankasa no mu.

Ntintim wɔ Frosted PVC so

Ink hwɛbea betumi ayɛ soronko wɔ frosted nneɛma so sɛ wɔde toto glossy fitaa PVC. Ɛsɛ sɛ adetɔfo sɔ kɔla ahorow a ɛyɛ den, nsɛm nketenkete a ɛyɛ fɛ, ink fitaa wɔ baabi a ɛfata ne nkitahodi a ɛda mfonini ahorow a wɔatintim ne nea wɔayɛ no frosted ntam no hwɛ.

Inkjet a Wotumi tintim PVC Fam

PVC a wotumi de inkjet tintim no de ade a wɔde akata so a wɔayɛ sɛ ɛbɛma wɔanya ink a ɛne no hyia na edi dwuma. Ɛsono nea wɔde kata so no wɔ embossing anaa frosting nhyehyɛe no ho na ɛsɛ sɛ wɔkyerɛ no soronko bere a ɛho hia sɛ wɔde inkjet tintim no.

Ink Absorption ne Mfonini Nkyerɛase

Ink-receptive coating a ɛne no hyia betumi aboa ma wɔahwɛ droplet trɛw so na aboa mfonini a emu da hɔ, nsɛm, barcode, QR code ne card mfonini afoforo a wɔayɛ ama obiara.

Drying Adwumayɛ

Bere a wɔde bɛyow no gyina nea wɔde kata so, ink chemistry, ink volume, printer nhyehyɛe, ɔhyew ne ɔhyew so. Ɛsɛ sɛ nkrataa a wɔatintim no yɛ nwunu koraa ansa na wɔaboaboa ano anaasɛ wɔayɛ no lamination.

Nneɛma a Wɔde Kata So a Ɛwɔ Afã Biako anaa Afã Abien a Wotumi tintim

Wobetumi asusuw adansi a wotumi tintim a ɛwɔ ɔfã biako ne afã abien no ho sɛnea kaad nhyehyɛe a wɔhwehwɛ no te. Ɛsɛ sɛ wohu ɔfã a wobetumi atintim no pefee bere a wɔreyɛ no.

Printer ne Ink a Wɔde Di Dwuma

Ɛnsɛ sɛ wɔfa no sɛ PVC soro biako sɛ ɛfata ma inkjet, offset, screen anaa dijitaal tintim nhyehyɛe biara. Ɛsɛ sɛ wɔde abasobɔde a ɛfata no ne mfiridwuma a wɔde tintim nhoma no hyia.

PVC Kaad Layer Nhyehyɛe a Wɔtaa Yɛ

Anim Krataa a Wotumi Print

Anim layer no tumi kura mfonini, ahyɛnsode, din, nsɛm, barcode ne kaad mfonini afoforo a wɔama ho kwan. Ɛsɛ sɛ aduru a wɔde yɛ nneɛma a ɛwɔ soro no ne ɔkwan a wɔapaw a wɔfa so tintim nhoma no hyia.

PVC Core a ɛwɔ hɔ

Core layer no boa dodow no ara a card no kɛse, stiffness ne opacity. Ɛsɛ sɛ wɔpaw ne kɛse sɛnea botae a wɔawie card gauge no te.

Akyi Krataa a Wotumi Print

Wobetumi de layer a ɛto so abien a wobetumi atintim adi dwuma ama kaad akyi a akwankyerɛ, ahyɛnsode, barcode, asɔremma ho nsɛm anaa nsɛm afoforo a wɔama ho kwan wom.

Ahobammɔ a Wɔde Kata So

Wobetumi de nkataso a ɛda adi a ɛne no hyia aka ho wɔ baabi a ɛho hia sɛ wɔbɔ ɔfasu ho banbɔ foforo. Ɛsɛ sɛ wɔde overlay thickness ne lamination tebea horow ka ho bere a wɔrebu finished-card thickness ho akontaa no.

Plastic Kaad a Wɔyɛ no Ɔkwan a Wɔfa so Yɛ

1. Paw Surface ne Nneɛma a Wɔde Yɛ

Paw embossed, frosted, inkjet-coated anaa PVC foforo a ɛwɔ hɔ sɛnea kaad no te, ɔkwan a wɔfa so tintim ne ɔkwan a wɔfa so dannan no te.

2. Si so dua sɛ Printing Compatibility

Si printa anaa press model, ink type, printable surface ne media nhyehyeɛ a ɛhia no so dua ansa na wɔayɛ.

3. Print Kaad Mfonini no

Fa tintim nhyehyɛe a ɛne no hyia no tintim kaad adwini a wɔhwehwɛ no na hwɛ sɛ kɔla, nsɛm a ɛkɔ akyiri, nea ɛbata ho ne nea wɔakyerɛw din wom no yɛ nokware.

4. Dry anaa Cure Nkratafa a Wɔatintim no

Ma nkrataa a wɔatintim no nwo anaasɛ ɛnsa koraa sɛnea ink mfiridwuma a woapaw no kyerɛ ansa na wɔaboaboa ano anaasɛ wɔayɛ ho adwuma bio.

5. Boaboa Kaad Layers no ano

Fa anim ne akyi nkrataa a wotumi tintim no hyia PVC core anaa overlay layers biara a ɛho hia.

6. Laminate a wɔde yɛ nneɛma

Fa ɔhyew, nhyɛso ne bere a wɔtra hɔ a wɔagye atom di dwuma bere a lamination yɛ kaad nhyehyɛe no fã. Ɛsɛ sɛ wɔsɔ embossed ne textured surfaces hwɛ de si so dua sɛ surface effect a wɔpɛ no da so ara gye tom wɔ lamination akyi.

7. Nwini ne Tebea a Ɛwɔ Hɔ

Ma nkratafa a wɔayɛ no laminated no nnwo na ɛnnyina ansa na woatwitwa na aboa ma woadi petee ne nsusuwii a ɛyɛ pɛpɛɛpɛ so.

8. Twitwa anaa Bɔ Kaad no

Fa mfiri a ɛfata a wɔde twitwa anaa wɔde bɔ akuturuku dannan awofo nkrataa no ma ɛnyɛ nkrataa mmiako mmiako.

9. Hwɛ Kaad a Wɔawie no mu

Hwɛ kaad no nsusuwii, ne kɛse, ne tintim su, ne soro nkyerɛwee, ne bonding, layer bonding, flatness, anoano ne aniwa a ɛyɛ pɛpɛɛpɛ.

PVC Kaad Nkrataa Titiriw a Wɔde Di Dwuma

Asɔremma Kaad a Wɔde Di Dwuma

Embossed anaa frosted surfaces betumi ama ayɛ soronko ama club, apɔw-mu-teɛteɛ, ahɔhodan, salon ne asɔremma-kaad nhyehyɛe afoforo.

Nokwaredi Nkrataa

Adetɔnfo ne nnwuma a wɔyɛ ɔsom adwuma betumi de PVC nneɛma titiriw adi dwuma ama nokwaredi a wɔakyerɛw so ne akatua-kaad nhyehyɛe ahorow a ɛhwehwɛ sɛ wɔde aniwa anaa wɔde nsa ka nneɛma ahorow wie.

Adwumayɛfoɔ ne Asuafoɔ ID Kaad

PVC grades a wotumi tintim inkjet betumi aboa ID card a wɔama ho kwan a wɔde mfonini, din, nsɛm a ɛkyerɛ sɛ obi hu ne ahyehyɛde no ahyɛnsode.

Akyɛde ne Nkɔmmɔbɔ Kaad

Textured, frosted ne printable PVC betumi adi dwuma ama branded akyɛde nkrataa, promotional cards ne aguadi nhyehyɛe ahorow a ɛhwehwɛ sɛ nsonsonoe kaad hwɛbea.

Adeyɛ ne Nsrahwɛfo Kaad

Wobetumi de kaad nneɛma a wotumi tintim adi dwuma ama nsrahwɛfo adansedi nkrataa a wɔama ho kwan, nhyiam kaad ne nhyiam badge wɔ baabi a wɔpɛ sɛ wɔde plastic a ɛyɛ den di dwuma.

Plastik Kaad a Wɔde Di Dwuma Titiriw

Custom embossed patterns, frosted appearance anaa specialty printing surfaces betumi asusuw ho ama premium ne customized card nnwuma.

Sɛnea Wobɛpaw Nneɛma a Ɛfata

Nhwehwɛmu a Wɔkamfo kyerɛ sɛ Ɛyɛ Nneɛma a Ɛyɛ Paara

• Ne kɛse: Hwɛ sɛnea krataa a wɔannoa no yɛ duru ne sɛnea ɛtumi gyina ano.

• Krataa Nsusuwii: Hwɛ sɛ ne tenten, ne tɛtrɛtɛ ne ne ahinanan yɛ nokware.

• Flatness: Si so dua sɛ printa anaa press feeding a ɛyɛ den no.

• White Color: Fa sunsuma ne batch consistency toto ho.

• Texture: Si emboss pattern ne surface uniformity so dua.

• Frosted Appearance: Hwɛ haze, gloss ne transparency wɔ baabi a ɛfata.

• Inkjet Coating: Sɔ ink absorption, drying ne mfonini nkyerɛase hwɛ.

• Printing: Hwɛ sɛ ink adhesion, kɔla ne fine-detail reproduction.

• Lamination: Sɔ layer bonding, flatness ne surface retention hwɛ.

• Finished Card: Hwɛ sɛnea wɔatwa, ne nsusuwii, ne kɛse, ne soro ne sɛnea wɔde aniwa hu.

Nneɛma a Wɔkora So ne Nea Wɔde Di Dwuma

Fa PVC kaad nkrataa sie petee wɔ dan mu baabi a ɛho tew na ɛhɔ yɛ kusuu a owia hann tẽẽ, ɔhyew a ɛboro so, mfutuma ne efĩ nni hɔ.

Ɛsɛ sɛ wɔbɔ nneɛma a wɔde inkjet akata so no ho ban fi nsateaa nkyerɛwee, nsuo ne akisikuru ho ansa na wɔatintim. Wɔkamfo nsateaa a ɛho tew kyerɛ bere a woredi nneɛma a wotumi tintim ho dwuma no.

Ɛsɛ sɛ wɔbɔ nneɛma a wɔakyerɛw so ne nsukyenee nso ho ban fi sɛ wɔbɛpetepete so dodo anaasɛ wɔde nhyɛso a ebetumi aka sɛnea wɔpene so sɛ wohu no.

Nsɛm a Ɛho Hia Ma Nsɛm a Wɔafa Ka

Delivery Bere a Wɔde Di Dwuma

Nneɛma a edidi so yi yɛ bere a wɔde yɛ nneɛma a wɔde gyina hɔ ma. Ankasa bere a wɔde di dwuma no gyina ɔfasu ayaresa, nea wɔde kata so, nsusuwii, dodow, sɛnea wɔyɛ no sɛnea wɔpɛ, raw-material a ɛwɔ hɔ ne ahyɛde a wosi so dua so.

Nneɛma a Wɔde Gu Nneɛma Mu ne Nea Wɔde Kɔma

Nhwɛsoɔ a wɔde kyekyere: A4-size PVC nhwɛsoɔ betumi ahyɛ PP bag anaa ahobammɔ envelope mu ama soro, tintim ne lamination nhwehwɛmu.

Nkratafa a Wɔde Gu Mu: Wobetumi de PE film anaa krataa a ɛyɛ bruu abɔ nkratafa no ani ho ban, a bɛyɛ 30kg wɔ PE bag biara mu sɛnea mprempren nneɛma a wɔde kyekyere nneɛma ho nhyehyɛe no kyerɛ no.

Pallet Packing: Reference export adesoa bɛyɛ 500–1000kg pallet biara, egyina nsusuwii ne shipment ahwehwɛde so.

Container Loading: Reference loading dodoɔ bɛyɛ tɔn 20 wɔ 20ft container biara mu, a ɛgyina packing nhyehyeɛ ankasa ne akwantuo anohyetoɔ so.

Hyɛn Gyinabea a Wɔde Nneɛma Gu Mu: Shanghai, Qingdao, Ningbo ne hyɛn gyinabea afoforo a ɛfata wɔ China.

Aguadi Nsɛm: Wobetumi aka EXW, FOB, CNF ne DDU ho asɛm sɛnea aguadi nhyehyɛe no te.

PVC Mfiridwuma ho Nsɛm ne Sɔhwɛ Amanneɛbɔ

Wɔakora PVC nkrataa a edidi so yi so afi nneɛma a wɔyɛ no kratafa a ɛwɔ hɔ dedaw no so de ayɛ mfiridwuma mu nhwehwɛmu. Amanneɛbɔ binom fa PVC grades, kɔla, thickness anaa tintim akwan foforɔ ho na ɛnsɛ sɛ wɔfa no ara kwa sɛ nkyerɛkyerɛmu a ɛfa embossed, frosted anaa inkjet-coated card material biara ho. Yɛsrɛ sɛ bisa nkrataa a ɛfa abasobɔde pɔtee a wɔde ama no ho.

Nneɛma a Ɛyɛ Pa ne Adansedi Ho Nwoma

Ɛsɛ sɛ wɔde RoHS, REACH ne nneɛma afoforo a ɛwɔ hɔ ho nkrataa a ɛwɔ hɔ no hyia PVC a wɔayɛ no pɛpɛɛpɛ, ne kɛse, ne soro ayaresa ne sɛnea wɔkra no. Ɛsɛ sɛ adetɔfo a wɔwɔ destination-market ahwehwɛde pɔtee bi si mprempren nkrataa a ɛfata no so dua ansa na wɔakra.

HSQY Plastic Kuw Wiase Nyinaa Nneɛma a Wɔde Kyerɛkyerɛ

HSQY Plastic Kuo no de wɔn ho hyɛ amanaman ntam plastic, nneɛma a wɔde kyekyere ne nneɛma a wɔyɛ ho ɔyɛkyerɛ mu de hyia wɔn a wɔyɛ kaad, wɔn a wɔtintim, wɔn a wɔsakra nneɛma, wɔn a wɔkyekyɛ ne adetɔfoɔ a wɔyɛ adwumaden.

Nsɛm a Wɔtaa Bisa Fa PVC Kaad Nkrataa Titiriw Ho

Dɛn ne PVC kaad krataa a wɔakyerɛw so?

Embossed PVC card sheet yɛ PVC a ɛyɛ den a ɛwɔ honam fam nwene te sɛ aburow anaasɛ nsusuwso foforo a wɔahyɛ so. Wɔde di dwuma bere a kaad a wɔawie no hwehwɛ sɛ wɔde nsa ka anaasɛ wɔde siesie ne soro no.

Dɛn ne frosted PVC card krataa?

Frosted PVC wɔ anim a ɛnyɛ hann anaasɛ ɛtrɛw. Ɛdenam abasobɔde so no, nneɛma no betumi ayɛ nea ɛnyɛ hann anaasɛ ɛyɛ nea ɛyɛ hann fã bi.

Dɛn ne PVC krataa a wotumi tintim wɔ inkjet so?

Inkjet PVC krataa no de ade a wɔde kata so a egye ink a wɔayɛ ama inkjet tintim a ɛne no hyia na edi dwuma. Ɛsɛ sɛ wɔsɔ coating, printer model ne ink system no bom sɔ hwɛ.

So embossed ne inkjet PVC yɛ ade koro?

Ɛnyɛ nea ɛho hia ankasa. Embossing kyerɛkyerɛ honam fam nkyerɛwee mu, bere a inkjet tintim hwehwɛ sɛ wɔde kata so a ɛne no hyia a wotumi tintim. Ɛsɛ sɛ wɔkyerɛ ade a ɛhwehwɛ nneɛma abien no nyinaa na wɔsɔ hwɛ sɛ ɛyɛ adansi a wɔaka abom.

So wobetumi de inkjet atintim PVC a wɔahyɛ no nwini?

Bere a frosted grade a wɔapaw no nso wɔ ɔfasu a ɛne inkjet tintim a ɛne no hyia nkutoo. Frosted hwɛbea nkutoo nkyerɛ sɛ inkjet no bɛyɛ pɛ.

Dɛn ne standard thickness no?

Mprempren ade nhyehyɛe no kyerɛw 0.3mm sɛ gyinapɛn a ɛyɛ den. Wobetumi aka sɛnea wɔayɛ no sɛnea wɔpɛ no ho asɛm sɛnea aduru a wɔde yɛ adwuma wɔ soro ne sɛnea wɔyɛ kaad no te.

Nkratafa akɛse a wɔahyɛ da ayɛ bɛn na ɛwɔ hɔ?

Standard nkyerɛkyerɛmu nsusuwii ahorow no bi ne 500 × 765mm ne 700 × 1000mm. Wobetumi asusuw akɛse a wɔahyɛ da ayɛ ho sɛnea nnwinnade a wɔde yɛ nneɛma ne sɛnea wɔahyehyɛ kaad te.

So inkjet printa biara betumi atintim wɔ inkjet PVC so?

Dabi, nea ɛne ne ho hyia no gyina printa no mfonini, ɔkwan a wɔfa so ma aduan, ink chemistry, coating ne media nhyehyɛe so. Ɛsɛ sɛ wɔde mfiri ankasa a wɔde yɛ nneɛma no sɔ nhwɛsode ahorow hwɛ.

So wobetumi de krataa koro no ara adi dwuma de atintim offset ne inkjet?

Ɛnsɛ sɛ wosusuw sɛ ɛyɛ saa. Offset ne inkjet akwan horow no betumi ahwehwɛ sɛ wɔyɛ nneɛma ahorow a wɔde di dwuma wɔ soro. Kyerɛ mfiridwuma a wopɛ sɛ wotintim ansa na woakra.

So wobetumi de laminate ayɛ nkratafa no?

Wobetumi de PVC card nneɛma a ɛfata adi dwuma wɔ laminated card structures mu. Ɛsɛ sɛ wɔsɔ coating, texture, core, overlay, temperature ne pressure a wotumi tintim no hwɛ sɛ nhyehyɛe a edi mũ.

So lamination beyi embossed texture no afi hɔ?

Lamination ɔhyew ne nhyɛso betumi anya surface texture so nkɛntɛnso. Sɛ ɛsɛ sɛ embossed hwɛbea no kɔ so da adi a, ɛsɛ sɛ wɔsɔ texture ne lamination cycle pɔtee hwɛ ansa na wɔayɛ.

Kaad bɛn na wobetumi de saa PVC nkrataa yi adi dwuma?

Nnwuma a wɔtaa de di dwuma ne asɔremma nkrataa, nokwaredi nkrataa, adwumayɛfo ID nkrataa, sukuuni nkrataa, akyɛde nkrataa, nsɛm a wɔde hyɛ nkurɔfo nkuran, nsrahwɛfo nkrataa ne plastic nkrataa titiriw afoforo.

So metumi anya nhwɛsode ahorow a ɛfa nneɛma ahorow a ɛwɔ soro ho?

Wobetumi asusuw nhwɛsode a ɛwɔ hɔ ho ama embossed, frosted, matte, glossy anaa printable grades. Wɔkamfo honam fam nhwɛsode kyerɛ bere a sɛnea ɛte, sɛnea ɛte anaa nea ɛne printa no hyia ho hia.

Nsɛm bɛn na ehia ma asɛm bi a wɔafa aka?

Yɛsrɛ sɛ fa ɔfasuo su a wɔhwehwɛ, ne kɛseɛ, ne kɛseɛ, kɔla, tintim kwan, printa anaa press model wɔ baabi a ɛfata, card structure, lamination ahwehwɛdeɛ, dodoɔ, packaging ahwehwɛdeɛ ne delivery destination ma.

Ɛfa HSQY Plastic Kuw ho

Changzhou Huisu Qinye Plastic Kuw no de PVC kaad nkrataa, PVC nneɛma a wotumi tintim, PVC nkrataa a ɛwɔ soro titiriw ne plastic nneɛma afoforo a ɛyɛ den ma kaad ayɛfo, tintimfo, nsakraefo, wɔn a wɔkyekyɛ ne amanaman ntam B2B adetɔfo.

HSQY boa gyinapɛn ne customized PVC krataa nsusuwii, soro ayaresa, nneɛma nhwɛsode, kaad-nneɛma a wɔyɛ ne export packaging ma adwumayɛfo kaad-yɛ nnwuma.

Sɛ wopɛ embossed, frosted anaa inkjet PVC card project a, fa surface effect a wɔhwehwɛ, printing system, sheet size, thickness, card structure ne estimated order quantity ma sɛnea ɛbɛyɛ a wobetumi asusuw nneɛma ho nkyerɛkyerɛmu a ɛfata ho.

ChangZhou HuiSu QinYe Plastic Kuw no sii bɛboro mfe 16, a afifide 8 de Plastic nneɛma ahorow nyinaa bɛma, a PVC RIGID CLEAR SHEET,PVC FLEXIBLE FILM, PVC GRAY BOARD, PVC FOAM BOARD, PET SHEET, ACRYLIC SHEET ka ho. Wɔde di dwuma kɛse ma Package, Sign,D ecoration ne mmeae afoforo. 

 

Yɛn adwene a ɛne sɛ yebesusuw nneɛma pa ne ɔsom nyinaa ho sɛ ɛyɛ pɛ importand ne adwumayɛ nya ahotoso fi adetɔfo hɔ, ɛno nti na yɛde biakoyɛ pa asi yɛn afɛfo a wofi Spain, Italy, Austria, Portugar, Germany, Greece, Poland, England, Amerika, Amerika Kesee Fam, India, Thailand, Malaysia ne nea ɛkeka ho.

 

Sɛ wopaw HSQY a, wubenya ahoɔden ne ahotɔ. Yɛyɛ nnwuma no mu nneɛma ahorow a ɛtrɛw sen biara na yɛkɔ so yɛ mfiridwuma foforo, nnuru a wɔde yɛ nneɛma ne ano aduru. Yɛn din a yɛanya wɔ su pa, adetɔfo som ne mfiridwuma mu mmoa ho no yɛ nea wontumi nsɛ wɔ adwuma no mu. Yɛkɔ so bɔ mmɔden sɛ yɛbɛma nneyɛe a ɛfa nneɛma a ɛbɛkɔ so atra hɔ daa ho anya nkɔso wɔ gua ahorow a yɛsom no so.