Polikarbonɛt Ɔvlay Film fɔ ID & Plastik Kad dɛn

Polycarbonate Overlay Film fɔ ID Kad & Kad Manufakchurin

HSQY polycarbonate overlay film na wan tin PC film we dɛn mek fɔ plastic kad manufakchurin, laminated kad strɔkchɔ, laser-personalized kad, print kad ɛn ɔda prɛsishɔn kad aplikeshɔn dɛn.

Di kɔrɛnt prodak spesifikeshɔn list transparent, pɔslɛn-wayt ɛn milk-wayt polikabɔnɛt fim wit smol, frɔst, glos ɛn mat sɔfays opshɔn dɛn. Sos-list tiknes inklud 0.05mm, 0.06mm, 0.075mm, 0.10mm, 0.125mm, 0.175mm ɛn 0.25mm, wit kɔstɔmayz spesifikeshɔn dɛn we de fɔ kwalifay B2B prɔjek dɛn.

Yu fɔ tɔk bɔt di tin dɛn we yu nid fɔ print ɛn fɔ mek yu bi pɔsin in yon bifo yu ɔda. Standart printabl PC film, klia ɔvlay film ɛn laserable polycarbonate film nɔto ɔtomɛtik di sem gred, ɛn bayer dɛn fɔ kɔnfɔm di layt pozishɔn we dɛn nid, lamination prɔses ɛn laser-personalization we.

HSQY kin tɔk bɔt kɔstɔm tiknɛs, sheet matirial ɔ rol fɔmat, kɔlɔ, sɔfayz tɛkstɔr ɛn printin rikwaymɛnt dɛn akɔdin to di kɔstɔma in kad kɔnstrɔkshɔn ɛn prodakshɔn ikwipmɛnt.

Polikarbonɛt Ɔvlay Film Spɛsifikeshɔn dɛn

Wetin Na Polikabɔnɛt Ɔvlay Film?

Polycarbonate overlay film na wan tin PC layt we dɛn kin yuz insay laminated plastic-kad strɔkchɔ. Dipen pan di kad dizayn, i kin wok lɛk transparent protɛktiv ɔda layt, layt we dɛn kin print ɔ pat pan laser-personalized kad kɔnstrɔkshɔn.

We dɛn de mek kad, dɛn kin gɛda kɔmpatibl polikabɔnɛt layers ɛn prosɛs dɛn bay we dɛn de yuz kɔntrol ɔt ɛn prɛshɔn. Di finish multilayer structure kin den prosied tru printin, personalization, die cutting, panch en oda kad-produkshon step dem akɔdin to di kad program.

Di rayt fim gred impɔtant. Transparent ɔvlay, wayt kad-kɔr fim, standad printabl PC ɛn laserable PC kin gɛt difrɛn fɔmyulashɔn, tɛkstɔr ɛn prɔsesin rikwaymɛnt.

Laserable vs Non-Laserable Polikarbonɛt Film

Di wan dɛn we de bay nɔ fɔ tink se ɛvri transparent polycarbonate film na laserable. Laser pɔsnalayzeshɔn nid fɔ gɛt kɔmpitabl PC gred ɛn i fɔ validet yuz di aktual laser ikwipmɛnt ɛn kɔmplit kad strɔkchɔ.

Surface Finish Opshɔn fɔ PC Kad Film

Surface structure afekt di apinans, printin, handling, lamination en fainal kad fil. Di sɔs spɛsifikɛshɔn de list smol, frɔst, glos ɛn mat opshɔn dɛn.

Print pan Polikabɔnɛt Kad Film

Di HSQY sɔs we de naw de list CMYK ɔfset printin, silk-skrin printin, sikyɔriti printin ɛn laser printin as aplikebul kad-prɔdakshɔn prɔses.

Ɔfset Printin we yu de print

Dɛn kin yuz ɔfset printin fɔ kad grafik usay di PC sɔfa, ink sistɛm ɛn di kɔring prɔses kɔmpitabl. Di wan dɛn we de bay fɔ sho if dɛn kin print bifo ɔ afta dɛn dɔn lamin.

Fɔ Print na Skrin

Skrin printin kin yuz fɔ opaque kala, sikyɔriti grafik, funkshɔnal ink ɛn sɛlɛkɛt dɛkɔretiv layers. Ink adhesion ɛn lamination bihayvya fɔ tɛst yuz di aktual printin sistem.

Sekyuriti Printin

Di wan dɛn we de mek sikyɔriti-kad kin nid spɛshal tin dɛn we dɛn print. Di pɔsin we de gi di fim fɔ gɛt di sabstret, sɔfa, ink ɛn prɔsesin spɛsifikɛshɔn dɛn we dɛn nid, we i nɔ fɔ tek am se ɔl di sikyɔriti-printin sistem dɛn de biev di sem we.

Laser Pɔsnalayzeshɔn

Laserable kad film must bi speshali selekt fɔ di pɔsnalayzeshɔn sistem. Standart transparent PC ɔvlay nɔ fɔ ɔtomɛtik makɛt as laser-riaktiv pas nɔmɔ dɛn dɔn disayn ɛn tɛst di ɛksaktɔ gred fɔ dat.

Polikarbonɛt Film fɔ Laminated Kad Kɔnstrɔkshɔn

Wan polikabɔnɛt kad kin yuz bɔku bɔku PC film layers wit difrɛn wok dɛn. Wan tipik projɛkt kin jɔyn transparent ɔda layers, print layers, opaque wayt layers, laser-personalization layers ɛn chip ɔ antena inlays akɔdin to di kad dizayn.

Saksesful lamination dipen pan di kompitibiliti fɔ ɔl di layers, lamination tɛmpracha, prɛshɔn, dwɛl tɛm, surface kɔndishɔn ɛn totɛl kad kɔnstrɔkshɔn.

Fɔ nyu prɔjek, gi di kɔmplit layt stak ɛn kɔrɛnt matirial spɛsifikɛshɔn pas fɔ pik ɔvlay film ɔl bay tik.

Kad Aplikeshɔn dɛn

ID Kad dɛn

Polycarbonate film kin yuz in multilayer identification-card structures usay durabiliti, dimɛnshɔnal stebiliti, printin ɛn pɔsnalayzeshɔn rikwaymɛnt impɔtant.

Drayva Laysens ɛn Akses Kad dɛn

Di wan dɛn we de mek kad kin spɛsifa klia ɔvlay, wayt kɔr ɛn laserable PC layers akɔdin to di dɔkyumɛnt dizayn ɛn pɔsnalayzeshɔn rikwaymɛnt dɛn.

Smat Kad dɛn

Smat-kad kɔnstrɔkshɔn kin jɔyn print PC fim dɛn wit kɔntakt ɔ kɔntaktlɛs kɔmpɔnɛnt dɛn. Lay strɔkchɔ ɛn lamination kɔndishɔn dɛn fɔ validet wit di kɔmplit kad dizayn.

Sekyuriti Dokumɛnt dɛn

Sekyuriti-dɔkyumɛnt aplikeshɔn dɛn nid fɔ gɛt matirial dɛn we dɛn kin kɔntrol tayt wan, kad dizayn ɛn pɔsnalayzeshɔn prɔses. Dɛn fɔ ebul fɔ no if di fim fit fɔ du am agens di tin dɛn we di kɔstɔma nid fɔ du wit di tɛknikal ɛn rigyuletɔri.

Polikarbonɛt Film Prodakt Imej dɛn

Transparent vs wayt polikarbonat kad film

Opshɔnal Fɔnshɔnal Polikabɔnɛt Film Gred dɛn

Standart kad ɔvlay fim nɔ fɔ ɔtomɛtik diskrayb as UV-rɛsistant, flame-retardant, had-kɔt, skrach-rɛsistant ɔ laserable. Dis na gred-spɛsifi k wok dɛn.

Kritikal Kwaliti Rikwaymɛnt fɔ PC Kad Film

• Tik ɛn tik tolɛreshɔn.

• Film wit ɛn dimɛnshɔnal tolɛreshɔn.

• Flatness ɛn kɔl.

• Surface kombineshɔn ɛn tɛkstɔr kɔnsistɛns.

• Transparency, haz ɔ opasiti.

• Print adhesion ɛn ink kɔmpitibliti.

• Lamination kompitibiliti wit di komplit kad stak.

• Laserability usay dɛn nid am.

• Surface defects, skrat ɛn kɔntaminɛshɔn limit.

• Sheet ɔ rol pak spɛsifikɛshɔn.

Infɔmeshɔn we dɛn nid fɔ mek wan PC Ɔvlay Film Quote

• Faynal kad tayp: ID kad, akses kad, smart kad, drayva laysens ɔ ɔda wan.

• PC layt we yu nid: klia ɔvlay, wayt kɔr, we yu kin print ɔ we yu kin yuz lɛsa.

• Rikwayd film tik ɛn tolɛreshɔn.

• Shit dimɛnshɔn ɔ rol wit.

• Surface finish na ɛni say.

• Transparent, posin wayt, milk wayt ɔ kɔstɔm kɔlɔ.

• Rikwayd haze, transmishɔn ɔ opasiti if dɛn kɔntrol am.

• Di we aw dɛn de print ɛn di we aw dɛn de yuz ink.

• Laser-pɔsɔnalayzeshɔn rikwaymɛnt.

• Lamination temperechur, prɛshɔn ɛn tɛm fɔ de.

• Komplit kad layt kɔnstrɔkshɔn if i de.

• Fכnshכnal gred we yu nid lεk FR, UV כ had kכt.

• Trayal kwantiti ɛn ɛni ia dimand.

• Pak rikwaymɛnt ɛn di kɔntri usay dɛn de go.

Fɔ pak tin dɛn

Polycarbonate card film fɔ pak fɔ protɛkt di surface frɔm skrat, dɔst, moisture ɛn handling damej we dɛn de stɔrɔj ​​ɛn transpɔt.

Di wan dɛn we de bay fɔ spɛsifa sheet matirial ɔ rol fɔmat, protɛktiv intaliv ɔ mask rikwaymɛnt, katon dimɛnshɔn, palet kɔnfigyushɔn ɛn lɛbl rikwaymɛnt we di apinɛns ɔ klin hanlin impɔtant.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Polikabɔnɛt Ɔvlay Film

Wetin dɛn kin yuz polycarbonate overlay film fɔ?

Polycarbonate overlay film na tin we dɛn kin yuz as tin funkshɔnal ɔ protɛktiv layt insay laminated plastic kad, inklud ID kad, akses kad, smart kad ɛn ɔda kad kɔnstrɔkshɔn.

Us tik tik dɛn de?

Di suplai prodakt spesifikeshɔn naw de list 0.05, 0.06, 0.075, 0.10, 0.125, 0.175 ɛn 0.25mm. Di pej taytul we de naw ɛn di tɔp prodak atribyut dɛn gɛt tiknɛs rɛnj dɛn we de agens dɛnsɛf, so HSQY fɔ kɔnfɔm ɛn standad di fayn prodakshɔn rɛnj bifo dɛn pablish am.

Yu tink se ɛvri polycarbonate ɔvlay film laserable?

Nɔ. Laserable PC film na wan patikyula funkshɔn gred. Di wan dɛn we de bay fɔ sho if dɛn nid fɔ gɛt tɛks ɔ pikchɔ dɛn we dɛn mek wit lɛsa ɛn dɛn fɔ gi di layz sistɛm ɛn di infɔmeshɔn bɔt di kad-kɔnstrɔkshɔn.

Wetin na di difrɛns bitwin klia ɔvlay ɛn wayt PC fim?

Dɛn kin pik klia ɔvlay usay dɛn nid fɔ gɛt transparency, we dɛn kin yuz wayt ɔ opaque PC film as intanɛnt kad layt ɔ printin sabstret. Di rayt wok dipen pan di kɔmplit kad kɔnstrɔkshɔn.

Yu tink se dɛn kin ɔfset fɔ print polikabɔnɛt fim?

Di HSQY spɛsifikɛshɔn we de naw de list CMYK ɔfset printin. Ink kompitibiliti, curing kondishɔn, print sayd ɛn lamination pefɔmɛns fɔ tɛst wit di aktual prodakshɔn prɔses.

Yu tink se dɛn kin print PC ɔvlay fim na skrin?

Yɛs, dɛn rayt skrin printin pan di aplikeshɔn dɛn we dɛn de yuz naw. Di wan dɛn we de bay fɔ gri fɔ di rayt fim sɔfa, ink ɛn di we aw dɛn de mɛn am bifo dɛn prodyuz am bɔku bɔku wan.

Us surface finish dɛn de we dɛn kin gɛt?

Di sos spesifikeshɔn list smol, frɔst, glos ɛn mat finish. If dɛn nid fɔ dɔn difrɛn difrɛn tin dɛn na ɛni say, sho di kɔmbaynshɔn we dɛn nid fɔ mek di say dɛn we dɛn dɔn pwɛl na di kot.

Ɔl di polikabɔnɛt fim dɛn nɔ de mek faya?

Nɔ, dɛn fɔ pik wan patikyula gred we nɔ de mek faya we dɛn nid fɔ mek faya klas we dɛn dɔn difayn. Gi di tɛst standad, di raytin we dɛn nid ɛn di tik we di fim gɛt.

Is standad PC kad film UV resistant?

UV pefɔmɛns na gred-spɛsifi k. If lɔng tɛm UV ɛksplɔshɔn impɔtant, aks fɔ UV-protɛkt polycarbonate gred wit aplikebul tɛst data.

HSQY kin saplae kostom tiknes?

Di sɔs se dɛn kin tɔk bɔt di tik we dɛn kɔstɔmayt. Prodakshɔn fisibiliti, tolɛreshɔn ɛn MOQ fɔ kɔnfɔm fɔ di gej we dɛn nid.

Yu tink se dɛn kin saplae di fim insay sheet matirial s ɔ rol?

Di kɔstɔm saiz dɛn de sɔpɔt bay di prɔdak infɔmeshɔn we de naw. Di wan dɛn we de bay we nid rol fɔ spɛsifa di wit, di kɔr dayamita, di maksimal OD we di rol gɛt ɛn di wet we di rol gɛt; sheet matirial bayer dɛn fɔ spɛsifa lɔng, wit ɛn tolɛreshɔn.

Wetin a fɔ gi fɔ wan nyu ID kad prɔjek?

Gi di kɔmplit kad layt strɔkchɔ, tiknes fɔ ɛni layt, printin prɔses, laser-personalization rikwaymɛnt, lamination sɛtin, surface finish, dimɛnshɔn ɛn ɛni ia dimand.

Yu tink se dɛn fɔ tɛst di sampul dɛn bifo dɛn mek dɛn bɔku bɔku wan?

Yɛs. Kad-film sɛmpul dɛn fɔ evalyu yuz di aktual printin, lamination, laser-personalization, day-cutting ɛn kad-tɛst prɔses bifo bulk aprɔval.

Wetin Mek Yu Pik HSQY Polikabɔnɛt Fim?

HSQY de saplae polycarbonate films in transparent, wait, kala ɛn kɔstɔmayz spɛsifikɛshɔn fɔ kad manufakchurin, printin, ilɛktroniks, optik aplikeshɔn ɛn ɔda industrial kɔnvɔtin projɛkt dɛn.

Bayer dɛn kin tɔk bɔt di film tik, dimɛnshɔn, sɔfays finish, kɔlɔ ɛn aplikeshɔn-spɛsifi k funkshɔnaliti akɔdin to dɛn prɔsesin rikwaymɛnt.

Eksplɔrɔ di kɔmplit wan            HSQY Polycarbonate Film rεnj        fכ klia, flame-retardant, optik-grεd εn tint PC film opshכn dεm.