Polycarbonate Overlay Film na ID & Plastik Kpekpeɖeŋugbalẽviwo

Polycarbonate Overlay Film na ID-gbalẽviwo & Kpekpeɖeŋugbalẽviwo wɔwɔ

HSQY polycarbonate overlay film nye PC film tsɛ aɖe si wowɔ na plastic card wɔwɔ, laminated card structures, laser-personalized cards, printed cards kple precision card dɔwo bubuwo.

Fifia ƒe adzɔnuwo ƒe nɔnɔme yɔ polycarbonate film si me kɔ, si le abe porcelain ene kple esi ƒe amadede nye notsi ɣi si ƒe akpa si le gbadzaa, si me tsikpe le, si le keklẽm eye wòle matte la ƒe tiatia. Dzɔtsoƒe-ŋlɔ titrimewo dometɔ aɖewoe nye 0.05mm, 0.06mm, 0.075mm, 0.10mm, 0.125mm, 0.175mm kple 0.25mm, kple nɔnɔme tɔxɛ siwo li na B2B dɔ siwo dze.

Ele be woagblɔ agbalẽtata kple asitɔtrɔ le eŋu ƒe nudidiwo hafi abia. Standard printable PC film, clear overlay film kple laserable polycarbonate film menye grade ɖeka le wo ɖokui si o, eye ele be nuƒlelawo naɖo kpe layer ƒe nɔƒe si wobia, lamination ɖoɖo kple laser-personalization mɔnu dzi.

HSQY ateŋu adzro custom thickness, agbalẽ dzi nyawo alo roll format, amadede, anyigba ƒe nɔnɔme kple agbalẽtata ƒe nudidiwo me le asisi ƒe kaɖi tutu kple ewɔwɔ dɔwɔnuwo nu.

Polycarbonate Overlay Film ƒe Nɔnɔmewo

Nukae Nye Polycarbonate Overlay Film?

Polycarbonate overlay film nye PC layer tsɛ aɖe si wozãna le laminated plastic-card xɔtuɖoɖowo me. Le kaɖia ƒe nɔnɔme nu la, ate ŋu awɔ dɔ abe gotagome takpɔnu si me kɔ, ƒuƒoƒo si woate ŋu ata alo kaɖi si wotsɔ laser wɔe ƒe akpa aɖe ene.

Le kaɖiwo wɔwɔ me la, wozãa dzoxɔxɔ kple nyaƒoɖeamenu si dzi wokpɔna tsɔ ƒoa polycarbonate ƒuƒoƒo siwo sɔ la nu ƒu hetrɔa asi le wo ŋu. Emegbe ƒuƒoƒo geɖe ƒe xɔtuɖoɖo si wowu enu ate ŋu ayi edzi to agbalẽtata, ame ŋutɔ ƒe tɔtrɔ, ku lãɖeɖe, atam kple kaɖi-wɔwɔ ƒe afɔɖeɖe bubuwo me le kaɖi ƒe ɖoɖoa nu.

Sinima ƒe dzeside tututu le vevie. Transparent overlay, white card-core film, standard printable PC kple laserable PC ate ŋu akpɔ mɔnu vovovowo, textures kple dɔwɔwɔ ƒe nudidiwo.

Laserable vs Non-Laserable Polycarbonate Film si woate ŋu atsɔ awɔ dɔe

Mele be nuƒlelawo nasusui be polycarbonate film ɖesiaɖe si me kɔ la nye esi woate ŋu atsɔ laser awɔe o. Laser ƒe ame ŋutɔ ƒe tɔtrɔ bia PC ƒe dzeside si sɔ eye ele be woatsɔ laser dɔwɔnu ŋutɔŋutɔ kple kaɖi ƒe wɔwɔme bliboa aɖo kpe edzi.

Surface Finish Tiatiawɔblɔɖe na PC Card Film

Anyigba ƒe wɔwɔme kpɔa ŋusẽ ɖe dzedzeme, agbalẽtata, eŋudɔwɔwɔ, lamination kple kaɖi mamlɛtɔ ƒe seselelãme dzi. Dzɔtsoƒe ƒe nɔnɔmetata yɔ tiatia siwo le gbadzaa, siwo me tsikpe le, esiwo le keklẽm kple esiwo me mekɔ o.

Agbalẽtata ɖe Polycarbonate Card Film dzi

HSQY dzɔtsoƒe si li fifia yɔ CMYK offset tata, seda-screen tata, dedienɔnɔ tata kple laser tata be wonye kaɖi-wɔwɔ ƒe ɖoɖo siwo sɔ.

Offset ƒe Agbalẽtata

Woateŋu azã offset tata na kaɖi ƒe nɔnɔmetatawo le afisi PC ƒe anyigba, ink system kple curing process sɔ le. Ele be nuƒlelawo nagblɔ nenye be agbalẽtata dzɔna do ŋgɔ na lamination alo emegbe.

Agbalẽtata le Screen dzi

Woate ŋu azã screen printing na amadede siwo me mekɔ o, dedienɔnɔ ƒe nɔnɔmetatawo, ink siwo wɔa dɔ kple atsyɔ̃ɖoɖo ƒe ƒuƒoƒo tiatia aɖewo. Ele be woazã agbalẽtata ƒe ɖoɖo ŋutɔŋutɔ atsɔ ado ink ƒe adhesion kple lamination ƒe nuwɔna kpɔ.

Dedienɔnɔ ƒe Agbalẽtata

Dedienɔnɔgbalẽvi wɔlawo ate ŋu abia be woata nu tɔxɛwo. Ele be filmdɔwɔƒea naxɔ substrate, surface, ink kple processing ƒe nɔnɔme siwo hiã evɔ masusui be dedienɔnɔ-tamɔ̃wo katã wɔa nu ɖekae o.

Laser ƒe Ame ŋutɔ ƒe Nɔnɔmewɔwɔ

Ele be woatia laserable card film koŋ na ame ŋutɔ ƒe nɔnɔmewɔwɔ ƒe ɖoɖoa. Mele be woatsɔ PC ƒe nutsyɔnu si me kɔ si wozãna ɖaa la adzra le eɖokui si abe laser-reactive ene o negbe ɖe wowɔ eƒe dzeside tututu eye wodoe kpɔ hena taɖodzinu ma hafi.

Polycarbonate Film na Laminated Kpekpeɖeŋugbalẽvi Xɔtutu

Polycarbonate kaɖi ate ŋu azã PC film ƒe ƒuƒoƒo geɖe siwo ƒe dɔwɔwɔ to vovo. Dɔ si wowɔna ɖaa ate ŋu aƒo gotagome ƒuƒoƒo siwo me kɔ, ƒuƒoƒo siwo wota, ƒuƒoƒo ɣi siwo me mekɔ o, ƒuƒoƒo siwo nye laser-personalization kple chip alo antenna inlays nu ƒu ɖekae le kaɖia ƒe nɔnɔme nu.

Lamination dzidzedzetɔe nɔ te ɖe ƒuƒoƒoawo katã ƒe ɖekawɔwɔ, lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi, anyigba ƒe nɔnɔme kple kaɖi ƒe xɔtutu bliboa dzi.

Le dɔ yeyewo gome la, na layer stack bliboa kple fifi nusiwo wotsɔ wɔe ƒe nɔnɔme tsɔ wu be nàtia overlay film to titrime ko dzi.

Kpekpeɖeŋugbalẽviwo ƒe Dɔbiagbalẽviwo

ID-gbalẽviwo

Woate ŋu azã polycarbonate film le multilayer identification-card xɔtuɖoɖowo me afisiwo eƒe anyinɔnɔ, didime ƒe liƒo, agbalẽtata kple ame ŋutɔ ƒe nudidiwo le vevie.

Ʋukugbalẽviwo Kple Mɔɖegbalẽviwo

Kpekpeɖeŋugbalẽvi wɔlawo ate ŋu agblɔ nutsyɔnu si me kɔ, nu vevi ɣi kple PC ƒe ƒuƒoƒo siwo woate ŋu azã laser le nuŋlɔɖi ƒe nɔnɔme kple ame ŋutɔ ƒe tɔtrɔ ƒe nudidiwo nu.

Smart Cardwo ƒe Dɔwɔgbalẽviwo

Smart-card xɔtuɖaŋuwo ate ŋu aƒo PC film siwo wota kple akpa siwo ka ɖe wo nɔewo dzi alo esiwo me kadodo mele o nu ƒu ɖekae. Ele be woaɖo kpe layer ƒe wɔwɔme kple lamination ƒe nɔnɔmewo dzi kple kaɖi ƒe nɔnɔme bliboa.

Dedienɔnɔ Ŋuti Nuŋlɔɖiwo

Dedienɔnɔ-nuŋlɔɖiwo ƒe dɔwɔɖoɖowo hiã na nusiwo dzi wokpɔna vevie, kaɖi ƒe ɖoɖowɔwɔ kple ame ŋutɔ ƒe tɔtrɔ ƒe ɖoɖowo. Ele be woada sinima ƒe dzedzeme kpɔ le asisi la ƒe mɔ̃ɖaŋu kple ɖoɖowɔɖi ƒe nudidiwo nu.

Polycarbonate Film ƒe Adzɔnuwo ƒe Nɔnɔmetatawo

Transparent vs White Polycarbonate Kpekpeɖeŋugbalẽvi Film

Polycarbonate Film ƒe Dzeside siwo woate ŋu awɔ le wo ɖokui si

Mele be woaɖɔ standard card overlay film le eɖokui si be UV-tsitretsitsi, dzo-xe mɔ, hard-coated, scratch-tresist alo laserable. Esiawo nye dɔ siwo wowɔna le klass tɔxɛ aɖe me.

Nudidi Vevi Siwo Le Dzedzeme Na PC Card Film

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Film ƒe kekeme kple didime ƒe mɔɖeɖe ɖe nu ŋu.

• Flatness kple curl.

• Anyigba ƒe ƒuƒoƒo kple nɔnɔme ƒe ɖekawɔwɔ.

• Nuwɔwɔ le gaglãgbe, haze alo opacity.

• Agbalẽtata ƒe adhesion kple ink ƒe ɖekawɔwɔ.

• Lamination ƒe sɔsɔ kple kaɖi ƒe ƒuƒoƒo bliboa.

• Laserability le afisi wòhiã le.

• Anyigba ƒe nɔnɔme madeamedziwo, ʋuʋudedi kple ɖiƒoƒo ƒe seɖoƒewo.

• Sheet alo roll packing ƒe nɔnɔmetata.

Nyatakaka Siwo Hiã Na PC Overlay Film Quote

• Kpekpeɖeŋugbalẽvi mamlɛtɔ ƒomevi: ID-gbalẽvi, mɔɖeɖegbalẽvi, smart card, ʋukugbalẽvi alo bubu.

• PC layer si hiã: nutsyɔnu si me kɔ, nu vevi ɣi, woate ŋu ata alo woate ŋu atsɔ laser.

• Film ƒe titrime kple mɔɖeɖe ɖe nu ŋu si hiã.

• Sheet ƒe didime alo agbalẽ xatsaxatsa ƒe kekeme.

• Anyigba ƒe nuwuwu le akpa ɖesiaɖe.

• Transparent, porcelain white, notsi ɣi alo amadede si wowɔ ɖe ɖoɖo nu.

• Haze, transmission alo opacity si hiã ne wokpɔ edzi.

• Agbalẽtata ƒe mɔnu kple nuŋlɔtsi ƒe ɖoɖo.

• Laser-ame ŋutɔ ƒe nɔnɔme ƒe nudidi.

• Lamination dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si wònɔa anyi.

• Kpe kaɖi ƒe ƒuƒoƒo ƒe xɔtutu bliboe ne eli.

• Dɔwɔwɔ ƒe dzesi si hiã abe FR, UV alo nu sesẽ si wotsɔ blaa nu ene.

• Dodokpɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi.

• Packing nudidi kple dukɔ si me woayi.

Nuwo babla

Ele be woatsɔ polycarbonate card film la ablae be wòakpɔ anyigba ta tso ƒoƒo, ke, tsidzadza kple eŋudɔwɔwɔ ƒe gbegblẽ me le edzadzraɖo kple etsɔtsɔ yi teƒe bubuwo me.

Ele be nuƒlelawo nagblɔ agbalẽ dzi nyawo alo agbalẽ xatsaxatsa ƒe nɔnɔme, ametakpɔnu ƒe nudidi siwo woatsɔ aƒo nu alo nutsyɔnu, kakɛ ƒe didime, pallet ƒe ɖoɖowɔwɔ kple dzeside ƒe nudidiwo ne dzedzeme alo eŋudɔwɔwɔ dzadzɛ le vevie ŋutɔ.

Nya Siwo Wobiaa Enuenu Tso Polycarbonate Overlay Film Ŋu

Nukae wozãna na polycarbonate overlay film?

Wozãa polycarbonate overlay film abe dɔwɔwɔ alo ametakpɔnu tsɛ aɖe le laminated plastic cards me, siwo dometɔ aɖewoe nye ID cards, access cards, smart cards kple card xɔtutu bubuwo.

Titrime kawoe li?

Nusiwo wotsɔ na ƒe nɔnɔmetatawo ŋlɔ 0.05, 0.06, 0.075, 0.10, 0.125, 0.175 kple 0.25mm fifia. Axa ƒe tanya si li fifia kple adzɔnu ƒe nɔnɔme siwo le etame la ƒe titrime ƒe didime siwo tsi tre ɖe wo nɔewo ŋu le eme, eyata ele be HSQY naɖo kpe ewɔwɔ ƒe didime mamlɛtɔ dzi ahawɔe wòasɔ ɖe ɖoɖo nu hafi woatae.

Ðe woate ŋu awɔ laser na film ɖesiaɖe si wotsɔ polycarbonate tsyɔ edzia?

Ao, laserable PC film nye dɔwɔwɔ ƒe dzesi tɔxɛ aɖe. Ele be nuƒlelawo nagblɔ nenye be nuŋɔŋlɔ alo nɔnɔmetata siwo wotsɔ laser wɔe hiã eye woana laser-mɔ̃a kple kaɖi-tutu ŋuti nyatakakawo.

Vovototo kae le clear overlay kple white PC film dome?

Zi geɖe la, wotiaa nutsyɔnu si me kɔ le afisi wòhiã be woawɔ nu le gaglãgbe, evɔ woate ŋu azã PC film ɣi alo esi me mekɔ o abe kaɖi ƒe ƒuƒoƒo ememetɔ alo agbalẽtaƒe ene. Dɔ si tututu woawɔ la nɔ te ɖe kaɖia tutu bliboa dzi.

Ðe woate ŋu ata polycarbonate film ɖe offset dzia?

HSQY ƒe nɔnɔme si li fifia yɔ CMYK ƒe offset tata. Ele be woado ink ƒe sɔsɔ, dɔyɔyɔ ƒe nɔnɔmewo, agbalẽtata ƒe akpa kple lamination ƒe dɔwɔwɔ kpɔ kple ewɔwɔ ƒe ɖoɖo ŋutɔŋutɔ.

Ðe woate ŋu ata PC overlay film ɖe screen dzia?

Ẽ, woŋlɔ screen printing ɖe dɔwɔnu siwo wozãna fifia dome. Ele be nuƒlelawo nada asi ɖe film ƒe anyigba, nuŋlɔtsi kple eƒe dɔyɔyɔ ƒe mɔnu tututu dzi hafi woawɔe le agbɔsɔsɔ gã me.

Nukawoe woate ŋu atsɔ awu anyigbae?

Dzɔtsoƒe ƒe nɔnɔmetata yɔ nusiwo le gbadzaa, tsikpe, keklẽ kple matte nuwuwu. Ne ehiã be woawu enu vovovowo le akpa ɖesiaɖe la, gblɔ anyigba ƒe ƒuƒoƒo si hiã le nyayɔyɔa me.

Ðe polycarbonate film la katã te ŋu xɔa dzoa?

Ao, ele be woatia dzoxɔxɔnutsitike ƒe dzesi tɔxɛ aɖe ne ehiã be woawɔ dzo ƒe hatsotso si woɖe fia. Na dodokpɔ ƒe dzidzenu, dzidzedzekpɔkpɔ si hiã kple film ƒe titrime.

Ðe PC card film si wozãna ɖaa la te ŋu nɔa te ɖe UV nua?

UV ƒe dɔwɔwɔ nye esi woɖo ɖe dzeside aɖe koŋ nu. Ne UV zazã ɣeyiɣi didi le vevie la, bia polycarbonate ƒe dzesi si wokpɔ ta na UV si me dodokpɔ ŋuti nyatakaka siwo sɔ le.

Ðe HSQY ate ŋu ana custom thicknesses?

Nyatakakatsoƒea gblɔ be woate ŋu aƒo nu tso titrime siwo wowɔ ɖe ɖoɖo nu ŋu. Ele be woaɖo kpe ewɔwɔ ƒe ŋutete, mɔɖeɖe ɖe nu ŋu kple MOQ dzi na dzidzenu si hiã.

Ðe woate ŋu atsɔ film la ana le agbalẽ dzi nyawo s alo agbalẽ xatsaxatsawo mea?

Wotsɔa adzɔnuwo ŋuti nyatakaka siwo li fifia doa alɔ lolome siwo wowɔ ɖe ɖoɖo nu. Ele be nuƒlela siwo hiã agbalẽ xatsaxatsawo nagblɔ kekeme, nu vevi ƒe didime, agbalẽ xatsaxatsa ƒe OD si sɔ gbɔ wu kple agbalẽ xatsaxatsa ƒe kpekpeme; agbalẽ dzi nyawo ele be nuƒlelawo nagblɔ didime, kekeme kple mɔɖeɖe ɖe nu ŋu.

Nukae wòle be mawɔ na ID-gbalẽvi ƒe dɔ yeye wɔwɔ?

Na bliboe kaɖi ƒe ƒuƒoƒo ƒe wɔwɔme, ƒuƒoƒo ɖesiaɖe ƒe titrime, agbalẽtata ƒe ɖoɖo, laser-ame ŋutɔ ƒe nudidi, lamination ɖoɖowo, anyigba ƒe nuwuwu, didime kple ƒe sia ƒe didi.

Ðe wòle be woado kpɔɖeŋuwo kpɔ hafi woawɔ wo le agbɔsɔsɔ gã mea?

Ɛ̃. Ele be woada kaɖi-film ƒe kpɔɖeŋuwo kpɔ to agbalẽtata ŋutɔŋutɔ, lamination, laser-personalization, die-cutting kple card-dodokpɔ ƒe mɔnu zazã me hafi woada asi ɖe edzi le agbɔsɔsɔ gã me.

Nukatae Nàtia HSQY Polycarbonate Film?

HSQY naa polycarbonate films le transparent, ɣi, amadede kple customized nɔnɔmewo na card wɔwɔ, agbalẽtata, elektrɔnik, optical dɔwɔwɔwo kple dɔwɔƒewo ƒe tɔtrɔdɔ bubuwo.

Nuƒlelawo ate ŋu adzro film ƒe titrime, eƒe didime, eƒe anyigba ƒe nuwuwu, amadede kple dɔwɔwɔ tɔxɛ ƒe dɔwɔwɔ me le woƒe dɔwɔwɔ ƒe nudidiwo nu.

Dzro nu bliboa me            HSQY Polycarbonate Film ƒe hatsotso        na eme kɔ, dzo-xe mɔ na, ​​optical-grade kple tinted PC film tiatia.