Faktɔri-dayrɛkt plastic sheet matirial sɔlvishɔn dɛn fɔ di wan dɛn we de bay B2B na di wɔl
Bɔt Wi     Kɔntakt Wi     Tul     Wi Faktɔri     Blɔg     Fri Sampul
Please Choose Your Language

FAQ Kategori

FAQ we dɛn kin aks

  • Q Aw fɔ kɔt ABS plastic sheet matirial s?

    WAN
    Fɔ kɔt ABS plastic sheet matirial s izi wit di rayt tul ɛn tɛknik, i dipen pan di tik ɛn prɛsishɔn we dɛn nid. Na dis na aw:
     
    Fɔ tin sheet matirial s (we go rich 1-2mm):
    Yutiliti naif ɔ skɔring tul: Skɔ di sheet matirial along wan rula wit fayn, ripit strɔk te yu kɔt af-af. Dɔn bɛn na di layn we yu de skɔ fɔ mek yu snap klin wan. Smɔl di ed dɛn wit sandpepa if nid de.
    Siza ɔ tin snip: Fɔ rili tin sheet matirial s ɔ kɔba kɔt, ebi siza ɔ snip kin wok fayn, pan ɔl we i kin nid fɔ dɔn di ed dɛn.
     
    Fɔ midul sheet matirial s (2-6mm): .
    Jigsaw: Yuz fayn fayn tut bled (10-12 TPI) we dɛn mek fɔ plastic. Klem di sheet matirial to wan stebul safa, mak yu layn ɛn kɔt wit mɔdaret spid fɔ avɔyd fɔ mɛlt di ABS tru frikshɔn. Kul di bled wit wata ɔ ɛya if i ɔt pasmak.
    Sɛkɔral saw: Yuz bled we gɛt kabayd (hay tut kɔnt, 60-80 TPI). Sikyu di sheet matirial , kɔt sloslo ɛn sɔpɔt am fɔ mek i nɔ shek ɔ krak.
     
    Fɔ tik panɛl dɛn (6mm+):
    Tebul Saw: Jɔs lɛk aw yu kin yuz sɛkɔral saw, yuz fayn fayn tut ɛn push di panɛl ɔltɛm. Yuz wan zero-clearance insert fɔ ridyus di chip.
    -Band saw: Gret fɔ kɔv ɔ tik kɔt; yuz wan smɔl bled we gɛt fayn tut ɛn go sloslo fɔ mek yu kɔntinyu fɔ kɔntrol am.
     
    Jɛnɛral advays dɛn:
    Mak: Yuz pensil ɔ mak wit rula ɔ tɛmplat.
    Sefty: Wear sef glas ɛn mask - ABS dɔst kin mek yu vɛks. Wok na say we briz kin blo.
    Kontrol spid: If yu fast, i kin mek di plastic mɛlt; tu slo kin mek di ed dɛn rɔf. Test pan skrap fɔs.
    Fɔ dɔn: Smɔl ed dɛn wit 120-220 grit sandpepa ɔ yuz tul fɔ pul di bɔr.

  • Q Us plastic sheet matirial bɛtɛ, PVC ɔ ABS?

    WAN
    If PVC ɔ ABS 'bɛtɛ' dipen pan yu patikyula nid dɛn – ɛni matirial de gi difrɛn bɛnifit dɛn.
     
    PVC na rigid, afɔdabul, ɛn i rili rɛsistɛnt to kemikal, mɔstɔ, ɛn wɛda, we mek i fayn fɔ yuz na do (ɛgz., paip, saydin, sayn). I nɔ de mek faya nɔ de bɔn ɛn i nɔ de pwɛl ɔnda UV layt kwik kwik wan lɛk ABS we dɛn nɔ trit. Bɔt i nɔ kin ambɔg bɛtɛ, i kin brok we kol, ɛn i nɔ izi fɔ mek i tan lɛk aw i kin bi.
     
    ABS, difrɛn frɔm dat, i tranga ɛn i nɔ de ambɔg, ivin we di tɛmpracha smɔl, i gɛt wan glos finish we de ɛp fɔ mek di fayn fayn tin dɛn (ɛgz., motoka pat dɛn, ilɛktroniks, protɔtayp dɛn). I izi fɔ mold, mashin, ɛn glu; כltu, i nכ de rεsistεnt to UV layt (i nid stεbyulayza fכ yus na do) εn i gεt lכw hεt tכlerεns (mεlt arawnd 105°C kכmpεr to PVC 's 80-100°C, dipכnt pan di tכp).

  • Q Wetin na ABS Plastik shit ?

    Wan ABS (Acrylonitrile Butadiene Styrene) sheet matirial na wan ay-pafɔmɛnshɔn tɛmplastik we dɛn no fɔ in wɔndaful rigiditi, hadnɛs, ɛn ɔt rɛsistɛns. Dis tɛmplastik de insay difrɛn gred dɛn, we de gi bɔku bɔku prɔpati ɛn aplikeshɔn dɛn. ABS plastic sheet matirial kin prosɛs yuz ɔl di standad tɛmplastik prɔsesin we ɛn i izi fɔ mashin. Dis sheet matirial na in dɛn kin yuz bɔku tɛm fɔ aplayans pat, motoka intɛriɔ, ayrakt intɛriɔ, bag, trey dɛn , ɛn ɔda tin dɛn. Dɛn sheet matirial s ya de insay difrɛn tiknɛs, kɔlɔ, ɛn sɔfayz finish, dɛn de fala intanashɔnal kwaliti standad.  

  • Q Wetin na di bɛnifit dɛn we polycarbonate film gɛt?

    WAN
    ♦ Strɔng ɛn stif ɛn ɔdasayz tafnɛs
    ♦ Ay impak rɛsistɛns
    ♦ Gud optik klia
    ♦ Ay ɔt rɛsistɛns
    ♦ Gud ilɛktrik insuleshɔn
    ♦ Abrashɔn, wɛda, ɛn kemikal rɛsistɛns

  • Q Wetin dɛn kin yuz polycarbonate film fɔ?

    Dɛn kin yuz wan polikabɔnɛt fim fɔ
    ɛnaji batri: bateri mɔdyul/sɛl/PAK, ɛnaji stɔrɔj ​​bateri, ɛn ɔda tin dɛn.
    motoka pat dɛn: Otomobil dashbɔd, displei panɛl, chaj pail, riyaviu miro, lamp, intɛriɔ dɛkɔreshɔn, ɛn ɔda tin dɛn.
    tin dɛn fɔ yuz na os: wan displei panɛl, kɔntrol panɛl, pat dɛn we dɛn kin yuz fɔ dekɔret, pat dɛn we dɛn bil insay, ɛn ɔda tin dɛn.
    ilɛktronik prɔdak dɛn: Laptɔp, monita, ɔdio, ilɛktrishɔn mita, mɛmbran switch, panɛl insuleshɔn protɛkshɔn pat dɛn, ɛn ɔda tin dɛn.
    kɔmyunikeshɔn displei: mobayl fon bakplan, bak kɔva, displei we dɛn kin put na motoka, ilɛktronik displei, ɛn ɔda tin dɛn.
    ikwipmɛnt fɔ protɛkt: Bagaj, ɛlmɛt fɔ protɛkt, pikin dɛn tɔys, mɛdikal ayzolayshɔn mask, gɔgl, wɛldin mask, swimin gɔglSanglas/hat, ɛn ɔda tin dɛn.

  • Q Wetin na polikabɔnɛt fim?

    Polikabɔnɛt fim na wan ay-pafɔmɛnshɔn tɛmplastik matirial we dɛn pul frɔm polikabɔnɛt plastic. Dɛn sabi am fɔ in optik klia, fayn fayn impak rɛsistɛns, ɛn spɛshal tɛmal stebiliti. Apat frɔm dat, i gɛt fayn fayn mɛkanikal prɔpati dɛn, i gɛt fayn fayn ilɛktrik insuleshɔn, i gɛt ay dimɛnshɔnal stebiliti, ɛn i gɛt fayn fayn krip rɛsistɛns. Dɛn kin yuz polikabɔnɛt fim dɛn na difrɛn industri dɛn lɛk ɛnaji batri, ilɛktronik prɔdak, motoka pat, os aplayans, kɔmyunikeshɔn displei, ikwipmɛnt fɔ protɛkt, ɛn ɔda tin dɛn.

  • Q Wetin na di bɛnifit fɔ r PET sheet matirial ?

    WAN
    Nɔn pɔyzin ɛn i sef
    Ay rigiditi, hadnɛs ɛn trɛnk
    Ay dimɛnshɔnal stebiliti
    I izi fɔ mek dɛn mek am we dɛn kɔl thermoform
    Gud barɛri fɔ ɔksijɛn ɛn wata vapour
    Gud mɛkanikal prɔpati dɛn

  • Q Di r PET sheet matirial 100% risaykul?

    A Yes, di r PET sheet matirial ɛn r PET prodakt dɛn na 100% risaykul.

  • Q Wetin na di difrɛns bitwin r PET ɛn PET ?

    A r PET sheet matirial na wan risaykul polyethylene terephthalate sheet matirial , we min se i kɔmɔt frɔm west PET we biznɛs ɛn kɔshɔma dɛn risaykul. PET sheet matirial s dɛn mek wit nyu vajin PET chips, wan matirial frɔm di ɔyl.

  • Q Wetin na ar PET sheet matirial ?

    A r PET sheet matirial na sataynabl plastic we dɛn mek wit risaykul polyethylene terephthalate (r PET ). dis sheet matirial s gεt di bεnεfit prכpati dεm fכ vεrjin PET , lεk trεnk, transparency, εn tεmral stεbiliti. Na di matirial bak we di manifakta dɛn kin yuz mɔ fɔ ɛp fɔ rich dɛn sastaynabiliti gol dɛn.

  • Q Wetin na cpet trey dɛn ?

    A CPET trey dɛn , ɔ Crystalline Polyethylene Terephthalate trey dɛn , na wan kayn it pak we dɛn mek wit wan patikyula kayn tɛmplastik matirial. CPET na wan we pipul sabi fכ in fayn fayn rεsistεns to ay εn lכw tεmprachכ, we mek i bi wan pכpul chכys fכ difrεn fכd pak aplikεshכn dεm.

  • Q Na CPET plastic tre we yu kin ɔvin!

    A Yes, CPET plastic trey dɛn na ovenable. Dɛn kin ebul fɔ bia wit tɛmpracha we de frɔm -40°C to 220°C (-40°F to 428°F), we kin mek dɛn ebul fɔ yuz dɛn na maykrowev ɔvin, kɔmɔn ɔvin, ɛn ivin frɔzɛn stɔrɔj.

  • Q Wetin na di difrɛns CPET tre vs PP tre !

    A Di men difrɛns bitwin CPET trey dɛn ɛn PP (Polypropylene) trey dɛn na dɛn ɔt rɛsistɛns ɛn matirial prɔpati. CPET trey dɛn na mɔ ɔt resistant ɛn dɛn kin yuz dɛn na ɔl tu di maykrowev ɛn kɔvɛnshɔnal ɔvin, we PP trey dɛn dɛn kin yuz fɔ maykrowev aplikeshɔn ɔ kol stɔrɔj. CPET de gi bεtε rigiditi εn rεsistεns fכ krak, we PP trey dɛn de mכr fleksibul εn sכmtεm i kin less expensive.

  • Q Us it pak we dɛn de yuz CPET trey dɛn fɔ?

    A CPET trey dɛn dɛn kin yuz fɔ difrɛn tin dɛn fɔ pak it, lɛk rɛdi it, bekɛri prɔdak, frɔzɛn it, ɛn ɔda tin dɛn we kin pwɛl we nid fɔ ɔt bak ɔ kuk insay ɔvin ɔ maykrowev.

  • Q CPET vs PET

    A CPET ɛn PET na ɔl tu kayn polyɛsta, bɔt dɛn gɛt difrɛn prɔpati bikɔs ɔf dɛn mɔlikul strɔkchɔ. CPET na kristalin fכm fכ PET , we de gi am inkrεs rigiditi εn bεtε rεsistεns to ay εn lכw tεmprachכ. PET na tin we dɛn kin yuz fɔ drink bɔtul, it kɔntena, ɛn ɔda tin dɛn we dɛn kin pak we nɔ nid di sem digri fɔ tolɛreshɔn pan tɛmpracha. PET na mɔ transparent, we CPET kin ɔltɛm bi opaque ɔ sɛmi-transparent.
STƆT WAN RFQ WE DƐN INFƆM

Lɛ Wi Fɛn di Rayt Plastik Sɔlv

Yu de luk fɔ plastic sheet matirial s, film, it pak, ɔ wan kɔstɔmayt sɔlvishɔn? Tɛl wi yu matirial, saiz, kwantiti, ɛn aplikeshɔn we yu nid. Wi tim go ɛp yu fɔ pik di rayt prɔdak ɛn gi yu kɔmpitishɔn kot.
√   Aplikeshɔn ɛn kɔnvɔshɔn prɔses
√ Tik, wit ɛn rol fɔmat
√ Kɔlɔ, klia ɛn sɔfa finish
√ Fɔnkshɔn, dɔkyumɛnt, kwantiti ɛn ples fɔ go
Rikwest Wi Bɛst Kɔt
Rikwest Wi Bɛst Kɔt

Wi matirial ɛkspɛkt dɛn go ɛp fɔ no di rayt sɔlvishɔn fɔ yu aplikeshɔn, put togɛda wan kot ɛn wan ditayl tɛmlayn.

HSQY-PLASTIC-GROUP-lɔgo-wayt-transparent
Imel: chenxiangxm@hgqyplastic.com

Plastik shit

Trey dɛn

Pakɛj Silin Film dɛn

Sɔpɔt

© KƆPIRAYT   2026 HSQY PLASTIC GROUP ƆL DI RAYT DƐN DE.