Nā hoʻonā palakiko pololei mai ka hale hana mea pepa no nā mea kūʻai B2B honua
Please Choose Your Language

Māhele FAQ

Nā nīnau i nīnau pinepine ʻia

  • Q Pehea e ʻoki ai i ka plastik ABS mea pepa ?

    A
    He maʻalahi ka ʻoki ʻana i ka plastik ABS mea pepa me nā mea hana a me nā ʻano hana kūpono, ma muli o ka mānoanoa a me ka pololei e pono ai. Eia ke ʻano:
     
    No nā mea pepa lahilahi (a hiki i ka 1-2mm):
    Pahi pono a mea hana kaha paha: E kaha i ka mea pepa ma kahi lula me nā hahau paʻa a hana hou ʻia a hiki i kou ʻoki ʻana i ka hapalua. A laila e kūlou ma ka laina kaha e ʻoki maʻemaʻe. E hoʻomaʻemaʻe i nā ʻaoʻao me ka pepa one inā pono.
    ʻŪmiʻi a ʻokiʻoki paha: No nā ʻoki lahilahi loa mea pepa a i ʻole nā ​​ʻoki piʻo, hana maikaʻi nā ʻūmiʻi kaumaha a ʻokiʻoki paha, ʻoiai pono paha e hoʻopau ʻia nā ʻaoʻao.
     
    No nā mea pepa waena (2-6mm):
    Jigsaw: E hoʻohana i kahi pahi niho lahilahi (10-12 TPI) i hana ʻia no nā plastik. E hoʻopaʻa i ka mea pepa i kahi ʻili paʻa, e kaha i kāu laina a ʻokiʻoki i ka wikiwiki kūpono e pale aku i ka hoʻoheheʻe ʻana o ka ABS ma o ka friction. E hoʻomaʻalili i ka pahi me ka wai a i ʻole ka ea inā wela loa.
    ʻOki poepoe: E hoʻohana i ka pahi me ka ʻaoʻao carbide (helu niho kiʻekiʻe, 60-80 TPI). E hoʻopaʻa i ka mea pepa , ʻoki mālie a kākoʻo iā ia e pale aku i ka haʻalulu a i ʻole ka nahā ʻana.
     
    No nā panela mānoanoa (6mm+):
    ʻO ka ʻoki papa: E like me ka ʻoki poepoe, e hoʻohana i ka pahi niho lahilahi a paʻi mālie i ka panela. E hoʻohana i kahi mea hoʻokomo ʻole e hōʻemi i ka chipping.
    -ʻOki hao: Maikaʻi no nā ʻoki piʻo a i ʻole nā ​​ʻoki mānoanoa; e hoʻohana i kahi pahi ololi a lahilahi nā niho a e hele mālie e mālama i ka kaohi.
     
    Nā ʻōlelo aʻoaʻo laulā:
    Ka Māka ʻana: E hoʻohana i ka penikala a i ʻole ka māka me ka lula a i ʻole ka template.
    Palekana: E ʻaʻahu i nā aniani palekana a me kahi pale maka - hiki i ka lepo ABS ke hoʻonāukiuki. E hana ma kahi ea.
    Ka wikiwiki o ke kāohi ʻana: Hiki i ka wikiwiki loa ke hoʻoheheʻe i ka palakiko; hiki i ka lohi loa ke hana i nā ʻaoʻao ʻino. E hoʻāʻo mua ma luna o ka ʻōpala.
    Hoʻopau: E hoʻomaʻemaʻe i nā ʻaoʻao me ka pepa one 120-220 grit a hoʻohana paha i kahi mea hana deburring.

  • Q ʻO wai ka plastik mea pepa ʻoi aku ka maikaʻi, PVC a i ʻole ABS?

    A
    Inā ʻoi aku ka maikaʻi PVC a i ʻole ABS, pili ia i kāu mau pono kikoʻī - hāʻawi kēlā me kēia mea i nā pono like ʻole.
     
    He paʻa, kūpono ke kumukūʻai, a kūpaʻa loa PVC i nā kemika, ka makū, a me ka wā ʻino, kahi e kūpono ai no ka hoʻohana ʻana ma waho (e laʻa, nā paipu, ka ʻaoʻao, nā hōʻailona). He pale ia i ka lapalapa a ʻaʻole e pala koke ma lalo o ke kukui UV e like me ka ABS i mālama ʻole ʻia. Eia nō naʻe, ʻaʻole ia e kūpaʻa i ka hopena, hiki ke lilo i mea palupalu i ke anuanu, a ʻaʻole maʻalahi ke hoʻomehana.
     
    ʻO ka ABS, i ka hoʻohālikelike ʻana, ʻoi aku ka paʻakikī a ʻoi aku ka pale ʻana i ka hopena, ʻoiai ma nā mahana haʻahaʻa, e hōʻike ana i kahi ʻano ʻālohilohi e hoʻomaikaʻi ai i ka nani (e laʻa, nā ʻāpana kaʻa, nā mea uila, nā prototypes). He maʻalahi ke hoʻoheheʻe, mīkini, a me ke kāpili; akā naʻe, ʻaʻole ia e kūpaʻa i ka mālamalama UV (e pono ana i nā mea hoʻopaʻa no ka hoʻohana ʻana ma waho) a he haʻahaʻa ka hoʻomanawanui wela (heheʻe ma kahi o 105°C i hoʻohālikelike ʻia me PVC 's 80-100°C, ma muli o ke ʻano).

  • He aha ka ABS Pepa pelakika ?

    ʻO ka ABS (Acrylonitrile Butadiene Styrene) mea pepa kahi thermoplastic hana kiʻekiʻe i ʻike ʻia no kona paʻakikī kupaianaha, paʻakikī, a me ke kūpaʻa wela. Loaʻa kēia thermoplastic i nā ʻano like ʻole, e hāʻawi ana i nā ʻano waiwai a me nā noi like ʻole. Hiki ke hana ʻia ka plastic ABS mea pepa me ka hoʻohana ʻana i nā ʻano hana thermoplastic maʻamau a maʻalahi hoʻi e mīkini. Hoʻohana pinepine ʻia kēia mea pepa no nā ʻāpana mīkini, nā loko o ke kaʻa, nā loko o ka mokulele, nā ukana, nā pā , a me nā mea hou aku. Loaʻa i nā mānoanoa like ʻole, nā kala, a me nā hoʻopau ʻili, ua kūlike kēia mau mea pepa me nā kūlana maikaʻi o ka honua.  

  • Q He aha nā pono o ka ʻili polycarbonate?

    A
    ♦ Ikaika a paʻakikī a paʻakikī loa
    ♦ Ke kūpaʻa hopena kiʻekiʻe
    ♦ ʻIke maka maikaʻi
    ♦ Ke kūpaʻa wela kiʻekiʻe
    ♦ Hoʻopaʻa uila maikaʻi
    ♦ Ka ʻānai ʻana, ke aniau, a me ke kūpaʻa kemika

  • Q He aha ka mea e hoʻohana ʻia ai ka ʻili polycarbonate?

    kahi kiʻi polycarbonate no ka hana ʻana Hoʻohana ʻia
    nā pila ikehu: modula pila/kelepona/PACK, pila mālama ikehu, a pēlā aku.
    nā ʻāpana kaʻa: ka papa hana kaʻa, ka papa hōʻike, ka puʻu hoʻouka, ke aniani hope, ke kukui, ka mea hoʻonaninani kūloko, a pēlā aku.
    nā lako hale: kahi papa hōʻikeʻike, papa hoʻokele, nā ʻāpana hoʻonaninani, nā ʻāpana i kūkulu ʻia, a pēlā aku.
    nā huahana uila: Laptop, monitor, leo, mika uila, kuapo membrane, nā ʻāpana pale insulation panel, a pēlā aku.
    nā hōʻike kamaʻilio: ke kua o ke kelepona paʻalima, ka uhi hope, ka hōʻike i kau ʻia ma ke kaʻa, ka hōʻike uila, a pēlā aku.
    nā lako pale: Nā ukana, nā mahiole pale, nā mea pāʻani a nā keiki, ka pale maka hoʻokaʻawale lapaʻau, nā maka aniani, ka pale maka wili, nā maka aniani ʻauʻau/pāpale, a pēlā aku.

  • Q He aha ka ʻili polycarbonate?

    He mea thermoplastic hana kiʻekiʻe ka ʻili Polycarbonate i loaʻa mai ka polycarbonate plastic. Ua kaulana ia no kona ʻike maka, kūpaʻa hopena maikaʻi loa, a me ke kūpaʻa wela kiʻekiʻe. Eia kekahi, he mau waiwai mechanical maikaʻi loa, insulation uila koʻikoʻi, kūpaʻa dimensional kiʻekiʻe, a me ke kūpaʻa kolo koʻikoʻi. Hoʻohana ʻia nā ʻili Polycarbonate i nā ʻoihana like ʻole e like me nā pila ikehu, nā huahana uila, nā ʻāpana kaʻa, nā mīkini home, nā hōʻike kamaʻilio, nā lako pale, a pēlā aku.

  • Q He aha ka pōmaikaʻi o r PET mea pepa ?

    A
    ʻAʻohe ʻawahia a palekana
    ʻO ke kūpaʻa kiʻekiʻe, ka paʻakikī a me ka ikaika
    Paʻa kiʻekiʻe o ka ana
    Maʻalahi e hoʻomehana
    Pale maikaʻi i ka oxygen a me ka mahu wai
    Nā waiwai mīkini maikaʻi

  • Nīnau: Hiki ke hana hou ʻia ka r PET mea pepa 100%?

    ʻAe , hiki ke hana hou ʻia nā huahana r PET mea pepa a me r PET 100%.

  • He aha ka ʻokoʻa ma waena o r PET a me PET ?

    He polyethylene terephthalate hana hou ʻia ʻo PET mea pepa mea pepa ]}, ʻo ia hoʻi, ua hele mai ia mai nā ʻōpala PET i hana hou ʻia e nā ʻoihana a me nā mea kūʻai aku. Hana ʻia nā PET mea pepa mai nā ʻāpana PET puʻupaʻa hou, he mea ia mai ka ʻaila.

  • Q He aha ka ar PET mea pepa ?

    He palakika hoʻomau ka r PET mea pepa i hana ʻia mai ka polyethylene terephthalate hana hou ʻia (r PET ). Loaʻa i kēia mau mea pepa nā waiwai maikaʻi o ka PET puʻupaʻa, e like me ka ikaika, ka moakāka, a me ke kūpaʻa wela. ʻO ia hoʻi ka mea i hoʻohana pinepine ʻia e nā mea hana e kōkua i ka hoʻokō ʻana i kā lākou mau pahuhopu hoʻomau.

  • Q He aha nā cpet nā pā ?

    ʻO CPET nā pā , a i ʻole Crystalline Polyethylene Terephthalate nā pā , he ʻano ʻōpala meaʻai i hana ʻia mai kahi ʻano mea thermoplastic kūikawā. Ua kaulana CPET no kona kūpaʻa maikaʻi loa i nā mahana kiʻekiʻe a me nā mahana haʻahaʻa, e lilo ia i koho kaulana no nā ʻano hana ʻōpala meaʻai like ʻole.

  • Nīnau : Hiki ke hoʻomoʻa ʻia ka palakiko CPET pā ?

    ʻAe , hiki ke hoʻomehana ʻia nā palakiko CPET nā pā . Hiki iā lākou ke kū i nā mahana mai -40°C a i 220°C (-40°F a i 428°F), kahi e hiki ai ke hoʻohana ʻia i loko o nā umu microwave, nā umu maʻamau, a me ka mālama ʻana i ka hau.

  • He aha ka ʻokoʻa ma waena CPET pā a me PP pā ?

    ʻO ka ʻokoʻa nui ma waena o CPET nā pā a me PP (Polypropylene) nā pā ʻo ko lākou kūpaʻa wela a me nā waiwai o nā mea. ʻOi aku ka kūpaʻa CPET nā pā i ka wela a hiki ke hoʻohana ʻia i loko o nā umu microwave a me nā umu maʻamau, ʻoiai ʻo PP nā pā e hoʻohana pinepine ʻia no nā noi microwave a i ʻole ka mālama anu. Hāʻawi CPET i ka paʻa a me ke kūpaʻa i ka haki ʻana, ʻoiai ʻoi aku ka maʻalahi o PP nā pā a hiki ke emi ke kumukūʻai i kekahi manawa.

  • N He aha nā ʻōpala meaʻai e hoʻohana ʻia ai CPET nā pā ?

    nā CPET nā pā no nā ʻano hana hoʻopili meaʻai like ʻole, me nā meaʻai i mākaukau, nā huahana berena, nā meaʻai hau, a me nā mea ʻē aʻe e pono ai ke hoʻomehana hou ʻia a kuke ʻia paha i loko o ka umu a i ʻole ka microwave. CPET nā pā

  • Q CPET vs PET

    He ʻano polyesters ʻelua ʻo CPET a me PET , akā he ʻokoʻa ko lāua mau waiwai ma muli o ko lāua mau ʻano molekala. ʻO CPET kahi ʻano crystalline o PET , ka mea e hāʻawi iā ia i ka paʻakikī a me ke kūpaʻa maikaʻi i nā mahana kiʻekiʻe a me nā mahana haʻahaʻa. Hoʻohana pinepine ʻia PET no nā ʻōmole inu, nā ipu meaʻai, a me nā noi hoʻopili ʻē aʻe ʻaʻole pono ke ʻano like o ka hoʻomanawanui mahana. ʻOi aku ka moakāka PET , ʻoiai ʻo CPET he opaque a semi-transparent paha.
E HOʻOMAKA I KA RFQ I ʻIKE ʻIA

E ʻimi kākou i ka hopena plastik kūpono

Ke ʻimi nei ʻoe i nā mea palaki mea pepa , nā kiʻiʻoniʻoni, nā ʻōpala meaʻai, a i ʻole kahi hopena i hoʻopilikino ʻia? E haʻi mai iā mākou i kāu mea hana, ka nui, ka nui, a me nā koi noi. E kōkua kā mākou hui iā ʻoe e koho i ka huahana kūpono a hāʻawi i kahi ʻōlelo hoʻokūkū.
√   Kaʻina hana noi a me ka hoʻololi ʻana
√ Mānoanoa, laulā a me ke ʻano o ka ʻōwili
√ Waihoʻoluʻu, moakāka a me ka hoʻopau ʻana o ka ʻili
√ Hana, palapala, nui a me kahi e hele ai
E noi i kā mākou ʻōlelo kūʻai maikaʻi loa
E noi i kā mākou ʻōlelo kūʻai maikaʻi loa

E kōkua kā mākou poʻe loea i ka ʻike ʻana i ka hopena kūpono no kāu noi, e hoʻohui i kahi ʻōlelo kūʻai a me kahi papa manawa kikoʻī.

HSQY-PLASTIC-GROUP-logo-keʻokeʻo-maopopo
Leka uila: chenxiangxm@hgqyplastic.com

Pepa pelakika

Nā pā

Nā Kiʻiʻoniʻoni Hoʻopaʻa Sila

Kākoʻo

© Kuleana kope   2026 HSQY PLASTIC GROUP Ua mālama ʻia nā kuleana āpau.