Izini-direct plastiki sɛbɛnfura min bɛ kɛ furaw diɲɛ B2B sannikɛlaw ye
Please Choose Your Language

Ɲininkaliw jaabiw Category

Ɲininkaliw

  • Q ABS plastiki sɛbɛnfura min bɛ kɛ s tigɛ cogo di?

    KELEN
    ABS plastiki sɛbɛnfura min bɛ kɛ s tigɛ ka nɔgɔn ni baarakɛminɛnw ni fɛɛrɛ ɲumanw ye, ka kɛɲɛ ni u bonya ni u tiɲɛni ye min ka kan. A kɛcogo filɛ nin ye:
     
    Ni sɛbɛnfura min bɛ kɛ s finmanw (fo ka se milimɛtɛrɛ 1-2 ma):
    Nafalan walima jatebɔminɛn : Aw bɛ sɛbɛnfura min bɛ kɛ jate kɛ sariyasun dɔ kan ni sɔgɔli gɛlɛnw ye, minnu bɛ segin-ka-bɔ fo ka se a tilancɛ tigɛ. O kɔ, aw bɛ aw biri jatebɔyɔrɔ la walasa ka sɔgɔsɔgɔ ka saniya. Aw bɛ a dakunw nɔgɔya ni cɛncɛn ye ni a mago bɛ a la.
    Sizo walima tintinw : Ni sɛbɛnfura min bɛ kɛ s minnu ka fin kosɛbɛ walima minnu kurulen don, sizo walima tintin gɛlɛnw bɛ baara kɛ ka ɲɛ, hali ni a bɛ se ka kɛ ko a dakunw ka kan ka ban.
     
    Ni sɛbɛnfura min bɛ kɛ s (2-6mm) cɛmancɛ ye:
    Jigsaw: Aw bɛ baara kɛ ni bɔgɔlan ye min ɲinw ka ɲi (10-12 TPI) min dilannen don plastikiw kama. Aw bɛ sɛbɛnfura min bɛ kɛ siri yɔrɔ sabatilen na, ka aw ka layini taamasiyɛn ani ka a tigɛ ni teliya damadɔ ye walasa aw kana ABS wuli ni sɔgɔsɔgɔli ye. Aw bɛ a dawolo nɛnɛ ni ji walima fiɲɛ ye ni a sumana kojugu.
    Sɔgɔsɔgɔninjɛ lamininen : Aw bɛ baara kɛ ni nɛgɛ ye min kun ye karɔti ye ( ɲinw hakɛ ka ca, 60-80 TPI). Aw bɛ sɛbɛnfura min bɛ kɛ siri, ka a tigɛ dɔɔni dɔɔni ani ka a dɛmɛ walasa a kana yɛrɛyɛrɛ walima ka kari.
     
    Ka ɲɛsin panɛriw ma minnu ka bon (6mm+):
    Tabali sɔgɔlan: I n’a fɔ a bɛ kɛ cogo min na ni sɔgɔlan ye min bɛ kɛ ni jiribolo ye, aw bɛ baara kɛ ni nɛgɛ ye min ɲinw ka ɲi ani ka panɛri gɛlɛya ka tɛmɛ a kɔnɔ ka ɲɛ. Aw bɛ baara kɛ ni zeru-clearance insert ye walasa ka chipping dɔgɔya.
    -Band saw: A ka ɲi kurukuruw walima tigɛcogo gɛlɛnw na; aw bɛ baara kɛ ni bɔgɔdaga fitinin ye min ɲinw ka ɲi ani ka taa dɔɔni dɔɔni walasa ka aw yɛrɛ minɛ.
     
    Ladilikanw bɛɛ lajɛlen:
    Taamaʃyɛn: Baara kɛ ni kretiɛn walima taamasiyɛn ye min bɛ ni sariyasun walima misali ye.
    Lakanali : Aw bɛ lakana lunɛti don ani ka masike don - ABS buguri bɛ se ka mɔgɔ dimi. Aw bɛ baara kɛ yɔrɔ la fiɲɛ bɛ don yɔrɔ min na.
    Kɔlɔsili teliya: Teliya kojugu bɛ se ka plastiki wuli; ni a bɛ kɛ dɔɔni kojugu, o bɛ se ka kɛ sababu ye ka dawolo gɛlɛnw bila mɔgɔ la. Aw bɛ a sɛgɛsɛgɛ fɔlɔ fɛn tiɲɛnenw kan.
    A laban: Aw bɛ a dakunw nɔgɔya ni 120-220 grit sandpaper ye walima aw bɛ baara kɛ ni deburring baarakɛminɛn ye.

  • Q Plastiki sɛbɛnfura min bɛ kɛ jumɛn ka fisa, PVC walima ABS?

    KELEN
    Ni PVC walima ABS 'ka fisa' bɛ bɔ i mago kɛrɛnkɛrɛnnenw na – fɛn kelen-kelen bɛɛ bɛ nafa wɛrɛw di.
     
    PVC ye fɛn gɛlɛn ye, a sɔngɔ ka nɔgɔn, wa a bɛ se ka kɛlɛ kosɛbɛ kemikɛlifɛnw, jisuma ani waati cogoya la, o de b’a to a ka ɲi kɛnɛma baara kama (misali la, pibilikiw, sidingɛw, taamasiyɛnw). A tɛ tasuma bɔ, wa a tɛ tiɲɛ UV yeelen kɔrɔ joona i n’a fɔ ABS furakɛbali. Nka, a tɛ se ka gosi kosɛbɛ, a bɛ se ka kari nɛnɛ waati, wa a ka nɔgɔn ka kɛ thermoform ye ten.
     
    ABS kɔni, a ka gɛlɛn ani a tɛ se ka fɛnw gosi, hali ni funteni ka dɔgɔn, a bɛ kɛ ni fini ye min bɛ manamana, min bɛ cɛɲi bonya (misali la, mobili yɔrɔw, ɛntɛrinɛti, prototypes). A dilanni ka nɔgɔn, a dilanni masin na ani a kola; nka, a tɛ se ka UV yeelen kɛlɛ kosɛbɛ (a bɛ sabatilifɛnw de wajibiya kɛnɛma baara kama) wa a funteni muɲuni ka dɔgɔn (a bɛ wuli 105°C lamini na ni i y’a suma ni PVC ka 80-100°C ye, ka kɛɲɛ ni suguya ye).

  • Q ABS Plastiki fèy ye mun ye ?

    ABS (Acrylonitrile Butadiene Styrene) sɛbɛnfura min bɛ kɛ ye thermoplastique ye min bɛ baara kɛ kosɛbɛ, min lakodɔnnen don a ka gɛlɛya, a gɛlɛya ani a ka funteni kunbɛncogo kabakoma fɛ. Nin thermoplastique in bɛ sɔrɔ suguya caman na, a bɛ nafa caman di ani a bɛ se ka kɛ cogo caman na. ABS plastiki sɛbɛnfura min bɛ kɛ bɛ se ka baara kɛ ni thermoplastic baarakɛcogo jɔnjɔnw bɛɛ ye, wa a dilanni ka nɔgɔn masin na. Nin sɛbɛnfura min bɛ kɛ in bɛ kɛ tuma caman na minɛnw yɔrɔw, mobili kɔnɔna, awiyɔn kɔnɔna, bagaji, sanubɔlanw , ani fɛn wɛrɛw. A bɛ sɔrɔ u bonya, u kulɛriw ani u ɲɛda fini suguya caman na, o sɛbɛnfura min bɛ kɛ s bɛ bɛn diɲɛ jogoɲumanya sariyaw ma.  

  • Q Polikarbonati filimu nafa ye mun ye?

    KELEN
    ♦ A barika ka bon ani a ka gɛlɛn ani a ka gɛlɛn ka bɔ kɛnɛ kan
    ♦ A ka ca a la, a bɛ se ka fɛn dɔw kɛlɛ
    ♦ Ɲɛkisɛ jɛlen ɲuman
    ♦ Funteni kunbɛncogo ka bon
    ♦ Kuranko ɲuman
    ♦ Abrasion, waati, ani kemikaliya kunbɛnni

  • Q Polikarbonati filimu bɛ kɛ mun na?

    Polikarbonati filimu bɛ kɛ ka...
    fanga batiriw : batiri modulu/seli/PACK, fanga mara batiri, a ɲɔgɔnnaw.
    mobili yɔrɔw : Mobili dasibɔlan, jiralan, chargement pile, kɔfɛla filɛlikɛlan, lanpan, kɔnɔna masirili, a ɲɔgɔnnaw.
    so kɔnɔ minɛnw : jiralan, kunnafonisɛbɛn, masirifɛnw, fɛn minnu bɛ don a kɔnɔ, a ɲɔgɔnnaw.
    ɛntɛrinɛti fɛnw : Ɔridinatɛri, monitor, audio, kuran jateminɛnan, membrane switch, panneau insulation lakanani yɔrɔw, a ɲɔgɔnnaw.
    kumaɲɔgɔnya jiralanw : telefɔni selilɛri kɔkanna, kɔfɛla, mobili kɔnɔ jiralan, ɛntɛrinɛti jiralan, a ɲɔgɔnnaw.
    lakanani minɛnw : Bagajiw, lakanani kasɛtiw, denmisɛnw ka tulonkɛfɛnw, furakɛli-yɔrɔ-masque, lunɛti, solda-masque, nakɔbaarakɛminɛnwTile-lunɛti/filɛtiw, a ɲɔgɔnnaw.

  • Q Polikarbonati filimu ye mun ye?

    Polikarbonati filimu ye fɛn ye min bɛ baara kɛ kosɛbɛ, min bɛ bɔ polikarbonati plastiki la. A lakodɔnnen don a ka ɲɛnayeli jɛlen fɛ, a ka se ka fɛnw gosi kosɛbɛ, ani a ka funteni sabatili ka fisa. Ka fara o kan, a bɛ ni masinko ɲumanba ye, a bɛ kuran lamini kosɛbɛ, a hakɛ bɛ sabati kosɛbɛ, ani a bɛ se ka sɔgɔsɔgɔ kosɛbɛ. Polikarbonati filimuw bɛ kɛ baara suguya caman na i n’a fɔ fanga batiriw, ɛntɛrinɛti fɛnw, mobili yɔrɔw, so kɔnɔ minɛnw, kumaɲɔgɔnya jiralanw, lakanani minɛnw, a ɲɔgɔnnaw.

  • Q Nafa jumɛn bɛ r PET sɛbɛnfura min bɛ kɛ la ?

    KELEN
    A tɛ baga ye ani a farati tɛ
    A ka gɛlɛn kosɛbɛ, a ka gɛlɛn ani a fanga ka bon
    Dimensionnel sabatili sanfɛ
    A ka nɔgɔn ka thermoformer kɛ
    Oksizɛni ni jikuruw balilan ɲuman
    Masina nafama ɲumanw

  • Q Yala r PET sɛbɛnfura min bɛ kɛ 100% bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

    A Ɔwɔ, r PET sɛbɛnfura min bɛ kɛ ni r PET fɛnw bɛ se ka segin u cogo kɔrɔ la 100%.

  • Q Danfara jumɛn bɛ r PET ni PET cɛ ?

    A r PET sɛbɛnfura min bɛ kɛ ye poliyetilɛni tereftalati sɛbɛnfura min bɛ kɛ ye min bɛ segin ka kɛ fɛn wɛrɛ ye, o kɔrɔ ye ko a bɛ bɔ bɔgɔw la PET minnu bɛ segin ka kɛ fɛn wɛrɛw ye jagokɛlaw ni feerekɛlaw fɛ. PET sɛbɛnfura min bɛ kɛ s bɛ dilan ni npogotigi kura PET chips ye, fɛn min bɛ bɔ tulu la.

  • Q ar PET sɛbɛnfura min bɛ kɛ ye mun ye ?

    A r PET sɛbɛnfura min bɛ kɛ ye plastiki sabatilen ye min dilannen don ni poliyetilɛni tereftalati ye min bɛ segin ka kɛ fɛn wɛrɛ ye (r PET ). Nin sɛbɛnfura min bɛ kɛ s ninnu nafa ka bon npogotiginin PET , i n’a fɔ fanga, kɛnɛya, ani funteni sabatili. O fana ye fɛn ye min bɛ kɛ ka caya fɛn dilannikɛlaw fɛ walasa ka dɛmɛ don u ka sabatili kuntilenna sɔrɔli la.

  • Q Cpet sanubɔlanw ye mun ye ?

    A CPET sanubɔlanw , walima Crystalline Polyethylene Terephthalate sanubɔlanw , olu ye dumuni foroko suguya dɔ ye min dilannen don ni fɛnɲɛnamafagalan suguya kɛrɛnkɛrɛnnen dɔ ye. CPET lakodɔnnen don a ka se ka funteni caman ni funteni dɔgɔyalen kɛlɛ kosɛbɛ, o de b’a to a bɛ kɛ sugandili ye min ka di mɔgɔw ye dumuni foroko suguya caman na.

  • Q Yala CPET plastiki tiriwari bɛ se ka kɛ foro kɔnɔ?

    A Ɔwɔ, CPET plastiki sanubɔlanw bɛ se ka kɛ foro kɔnɔ. U bɛ se ka funteni muɲu min bɛ daminɛ -40°C la ka se 220°C ma, o b’a to u bɛ se ka kɛ mikrowɛnw na, foro kɔrɔlenw na, ani hali u marayɔrɔw la minnu bɛ kɛ nɛnɛ na.

  • Q Danfara jumɛn bɛ CPET tiriwari ni PP tiriwari cɛ !

    A Danfaraba min bɛ CPET sanubɔlanw ni PP (Polypropylene) sanubɔlanw cɛ, o ye u ka funteni kunbɛnni ni u ka fɛnw cogoya ye. CPET sanubɔlanw bɛ funteni kɛlɛ ka tɛmɛ, wa u bɛ se ka kɛ mikro ni foro kɔrɔ fila bɛɛ la, k’a sɔrɔ PP sanubɔlanw bɛ kɛ ka caya mikrowɛn baara la walima nɛnɛ marayɔrɔ la. CPET bɛ gɛlɛya ɲuman di ani ka se ka kari, k’a sɔrɔ PP sanubɔlanw bɛ se ka wuli ka bɔ a nɔ na, ​​wa a bɛ se ka kɛ tuma dɔw la, a musaka ka dɔgɔ.

  • Q Dumuni foroko jumɛnw bɛ CPET sanubɔlanw kɛ?

    A CPET sanubɔlanw bɛ kɛ dumunifɛnw foroko baara suguya caman na, i n’a fɔ dumuni labɛnnenw, burufefɛnw, dumuni minnu sumana, ani fɛn wɛrɛw minnu bɛ tiɲɛ, minnu ka kan ka sumaya kokura walima ka tobi foro walima mikro kɔnɔ.

  • Q CPET ni PET ni ɲɔgɔn cɛ.

    A CPET ni PET fila bɛɛ ye poliyesitɛri suguya ye, nka u ka jogo tɛ kelen ye k’a sababu kɛ u ka molekiyɔmuw jɔcogo ye. CPET ye PET kristali cogoya ye, min b’a to a ka gɛlɛn ka caya ani ka se ka funteni caman ni funteni dɔgɔya ka ɲɛ. PET bɛ kɛ ka caya minfɛnw buteliw la, dumunikɛminɛnw kɔnɔ, ani foroko wɛrɛw la minnu tɛ funteni muɲuni hakɛ kelen de wajibiya. PET bɛ kɛnɛya ka tɛmɛ, k’a sɔrɔ CPET ka teli ka kɛ opaque walima semi-transparent ye.
RFQ KUNNAFONI MIN BƐ SƆRƆ

An ka plastiki fura ɲuman ɲini

Aw bɛ plastiki sɛbɛnfura min bɛ kɛ s, filimuw, dumunifɛnw foroko, walima fura min bɛ kɛ ka kɛɲɛ ni aw sago ye, aw bɛ o ɲini wa? Aw ka fɛn dilannenw, u bonya, u hakɛ ani u kɛcogo wajibiyalenw fɔ an ye. An ka jɛkulu bɛna aw dɛmɛ ka fɛn ɲuman sugandi ani ka quotation competitive di aw ma.
√   A kɛcogo ni a jiginni taabolo
√ A bonya, a bonya ani a wulicogo
√ Kulɛri, a jɛlen ani a sanfɛla fini
√ Baarakɛcogo, sɛbɛnw, hakɛ ani taayɔrɔ
An ka Quotation ɲuman ɲini
An ka Quotation ɲuman ɲini

An ka minɛnko dɔnnikɛlaw bɛna dɛmɛ ka fura ɲuman dɔn i ka ɲinini na, ka quotation ni waatibolodacogo ɲɛfɔlen dɔ fara ɲɔgɔn kan.

HSQY-PLASTIC-GROUP-logo-finman-jɛlen
E-mail: chenxiangxm@hgqyplastic.com

Plastiki fèy

Sanubɔlanw

Packaging Sigili filimuw

Sɛmɛjiri

© COPYRIGHT   2026 HSQY PLASTIC GROUP ƝƐNABƆLI ƝƐNABƆLI BƐƐ YE.