Factory-direct plastic krataa so nsɛm ano aduru ma wiase nyinaa B2B adetɔfo
Please Choose Your Language

FAQ Ɔfã

FAQ

  • Q Sɛnea wotwitwa ABS plastic krataa so nsɛm s?

    BI
    ABS plastic krataa so nsɛm s a wobɛtwa no yɛ mmerɛw denam nnwinnade ne akwan a ɛfata so, a egyina ne kɛse ne pɛpɛɛpɛ a ɛho hia so. Ɔkwan a wɔfa so yɛ no ni:
     
    Sɛ wopɛ krataa so nsɛm s a ɛyɛ tratraa (ɛkɔ 1-2mm):
    Utility knife anaa scoring adwinnade: Fa stroke a ɛyɛ den, a wɔtaa yɛ no hyɛ krataa so nsɛm no so wɔ ruler bi so kosi sɛ wobɛtwa fã. Afei kotow wɔ scoring line no so na ama woabɔ no yiye. Sɛ ɛho hia a, fa sandpaper yɛ anoano no ma ɛyɛ mmerɛw.
    Scissors anaa tin snips: Sɛ wopɛ krataa so nsɛm s a ɛyɛ tratraa paa anaasɛ ɛyɛ curved cuts a, scissors anaa snips a emu yɛ duru yɛ adwuma yiye, ɛwom sɛ ebia ɛho behia sɛ wowie anoano de.
     
    Sɛ wopɛ krataa so nsɛm s (2-6mm):
    Jigsaw: Fa agyan a ne sẽ yɛ fɛ (10-12 TPI) a wɔayɛ ama plastic di dwuma. Fa krataa so nsɛm no hyɛ baabi a ɛyɛ den, hyɛ wo nhama no agyirae na twa no ahoɔhare a ɛkɔ fam na woakwati sɛ wobɛbɔ ABS no denam friction so. Fa nsu anaa mframa ma agyan no nwini sɛ ɛyɛ hyew dodo a.
    Saw a ɛyɛ kurukuruwa: Fa agyan a ɛwɔ carbide ano (ɛse dodow a ɛkɔ soro, 60-80 TPI) di dwuma. Fa krataa so nsɛm no bɔ ho ban, twa no brɛoo na boa no na amma anwosow anaasɛ ansɛe.
     
    Sɛ wopɛ panels a ɛyɛ den (6mm +):
    Table Saw: Sɛnea ɛte wɔ saw kurukuruwa ho no, fa agyan a ne sẽ yɛ fɛ di dwuma na pia panel no denneennen fa mu. Fa zero-clearance insert di dwuma na ama chipping so atew.
    -Band saw: Ɔkɛseɛ ma curves anaa thick cuts; fa agyan teateaa a ne sẽ yɛ fɛ di dwuma na kɔ brɛoo na ama woatumi adi so.
     
    Afotu a wɔde ma wɔ ɔkwan a ɛkɔ akyiri so:
    Agyiraehyɛde: Fa pɛnsere anaa agyiraehyɛde a ɛwɔ ruler anaa template di dwuma.
    Ahobanbɔ: Hyɛ ahobammɔ ahwehwɛ ne akataso - ABS mfutuma betumi ayɛ abufuw. Yɛ adwuma wɔ baabi a mframa fa mu.
    Ahoɔhare a wɔde di dwuma: Ahoɔhare dodo betumi ama plastic no ayɛ mmerɛw; brɛoo dodo betumi ama anoano ayɛ mmerɛw. Di kan sɔ hwɛ wɔ scrap so.
    Finishing: Fa 120-220 grit sandpaper yɛ anoano a ɛyɛ torotoro anaasɛ fa adwinnade a wɔde yi deburring di dwuma.

  • Q Plastik krataa so nsɛm bɛn na eye, PVC anaa ABS?

    BI
    Sɛ PVC anaa ABS yɛ 'ye' a, egyina w'ahiadeɛ pɔtee so – nneɛma biara de mfasoɔ ahodoɔ ma.
     
    PVC yɛ katee, ne boɔ yɛ den, na ɛtumi gyina nnuru, nsuo, ne wim tebea ano yie, na ɛma ɛyɛ papa sɛ wɔde bedi dwuma wɔ abɔnten (sɛ nhwɛsoɔ no, paipu, siding, signage). Ɛyɛ nea ogya ntumi nhyew na ɛnsɛe ntɛmntɛm wɔ UV hann ase te sɛ ABS a wɔansa no. Nanso, ɛnyɛ den sɛ ɛbɛbɔ, ebetumi ayɛ mmerɛw wɔ awɔw mu, na ɛnyɛ mmerɛw sɛ wɔbɛyɛ no thermoform.
     
    Nea ɛne eyi bɔ abira no, ABS yɛ den na ɛko tia nsunsuanso, wɔ ɔhyew a ɛba fam mpo mu, na ɛwɔ awie a ɛhyerɛn a ɛma afɛfɛde yɛ kɛse (sɛ nhwɛso no, kar afã horow, ɛlɛtrɔnik mfiri, nhwɛsode ahorow). Ɛnyɛ den sɛ wɔbɛhyehyɛ, afiri, na wɔde gluu abɔ; nanso, ɛnyɛ nea ɛko tia UV hann kɛse (ɛhwehwɛ sɛ wɔde nneɛma a ɛma nneɛma gyina pintinn di dwuma wɔ abɔnten) na ɛwɔ ɔhyew a ɛtumi gyina ano a ɛba fam (ɛyɛ nwene bɛyɛ 105°C sɛ wɔde toto PVC ’s 80-100°C ho a, egyina ne su so).

  • Q Dɛn ne ABS Plastik krataa ?

    ABS (Acrylonitrile Butadiene Styrene) krataa so nsɛm yɛ thermoplastic a ɛyɛ adwuma yiye a wogye tom sɛ ɛyɛ den, ɛyɛ den, na ɛko tia ɔhyew a ɛyɛ nwonwa. Saa thermoplastic yi wɔ ahorow ahorow, na ɛma wonya nneɛma ahorow pii ne dwumadie ahodoɔ. ABS plastic krataa so nsɛm betumi adi dwuma denam thermoplastic dwumadie akwan a wɔahyɛ da ayɛ nyinaa so na ɛnyɛ den sɛ wɔde mfiri bɛyɛ. Wɔtaa de saa krataa so nsɛm yi yɛ mfiri afã horow, kar mu nneɛma, wimhyɛn mu nneɛma, nneɛma, tray ahorow a wɔde di dwuma , ne nea ɛkeka ho. Wɔayɛ no wɔ ne kɛseɛ, kɔla, ne ne soro awie, saa krataa so nsɛm s yi di amanaman ntam gyinapɛn ahodoɔ a ɛfa nneɛma pa ho.  

  • Q Mfaso bɛn na ɛwɔ polycarbonate film so?

    BI
    ♦ Ahoɔden ne stiff na ɛda nsow toughness
    ♦ Nsunsuansoɔ a ɛkorɔn a ɛko tia
    ♦ Optical pefeeyɛ pa
    ♦ Ɔhyew a ɛkorɔn a ɛko tia
    ♦ Electrical insulation pa
    ♦ Abrasion, wim tebea, ne nnuru a ɛko tia

  • Q Dɛn na wɔde polycarbonate film di dwuma?

    Wɔde polycarbonate film di dwuma ma
    ahoɔden batere: battery module/cell/PACK, ahoɔden akorae batere, ne nea ɛkeka ho.
    kar afã horow: Kar dashboard, display panel, charge pile, akyi ahwehwɛ, kanea, dan mu nneɛma a wɔde siesie, ne nea ɛkeka ho.
    ofie mfiri: display panel, control panel, nneɛma a wɔde siesie fie, afã horow a wɔasisi, ne nea ɛkeka ho.
    ɛlɛtrɔnik nneɛma: Laptop, monitor, ɔdio, anyinam ahoɔden mita, membrane switch, panel insulation ahobammɔ afã horow, ne nea ɛkeka ho.
    nkitahodi a wɔde kyerɛ: telefon a wokura kyin akyi afiri, akyi kataso, kar a wɔde kyerɛ, ɛlɛtrɔnik afiri, ne nea ɛkeka ho.
    nneɛma a wɔde bɔ wɔn ho ban: Nneɛma, dade kyɛw a wɔde bɔ wɔn ho ban, mmofra agode, aduruyɛ mu akataso a wɔde tew wɔn ho, ahwehwɛ, welding akataso, asuguare ahwehwɛSunglass/hats, ne nea ɛkeka ho.

  • Q Dɛn ne polycarbonate film?

    Polycarbonate film yɛ ade a ɛyɛ hyew a ɛyɛ adwuma yiye a wonya fi polycarbonate plastic mu. Wonim no sɛ ɛyɛ nea ɛda adi pefee wɔ aniwa so, ɛko tia nsunsuanso yiye, na ɛma ɔhyew a ɛyɛ den yiye. Nea ɛka ho no, ɛwɔ mfiri a ɛkyɛn so, anyinam ahoɔden a ɛda nsow a ɛbɔ ho ban, ne kɛse gyina pintinn kɛse, na ɛko tia nwene a ɛda nsow. Wɔde polycarbonate films di dwuma wɔ nnwuma ahorow mu te sɛ ahoɔden batere, ɛlɛtrɔnik nneɛma, kar afã horow, ofie mfiri, nkitahodi a wɔde kyerɛ, ahobammɔ nnwinnade, ne nea ɛkeka ho.

  • Q Mfaso bɛn na ɛwɔ r PET krataa so nsɛm ?

    BI
    Ɛnyɛ awuduru na ahobammɔ wom
    Rigidity a ɛkorɔn, hardness ne ahoɔden
    Dimensional a ɛkorɔn a ɛyɛ den
    Ɛnyɛ den sɛ wɔbɛyɛ thermoform
    Akwanside pa a ɛmma oxygen ne nsu a ɛyɛ hyew nkɔ
    Mfiridwuma mu nneɛma pa

  • Q So r PET krataa so nsɛm no yɛ 100% a wotumi de di dwuma bio?

    A Yiw, r PET krataa so nsɛm ne r PET nneɛma no yɛ nea wotumi de di dwuma bio 100%.

  • Q Nsonsonoe bɛn na ɛda r PET ne PET ntam ?

    A r PET krataa so nsɛm yɛ polyethylene terephthalate krataa so nsɛm a wɔasan de adi dwuma, a ɛkyerɛ sɛ ɛfiri nwura PET a nnwuma ne adetɔfoɔ asan de adi dwuma mu. PET krataa so nsɛm s wɔde ɔbaabun PET chips foforo, ade bi a efi ngo no mu na ɛyɛ.

  • Q Dɛn ne ar PET krataa so nsɛm ?

    A r PET krataa so nsɛm yɛ plastic a ɛtra hɔ kyɛ a wɔde polyethylene terephthalate a wɔasan de adi dwuma (r PET ). Saa krataa so nsɛm s yi wɔ mfasoɔ a ɛwɔ ɔbaabun PET , te sɛ ahoɔden, nea ɛda adi pefee, ne ɔhyew a ɛgyina pintinn. Ɛsan nso ne nneɛma a wɔn a wɔyɛ nneɛma no taa de di dwuma de boa ma wodu wɔn botae ahorow a ɛne sɛ wɔbɛkɔ so atra hɔ daa no ho.

  • Q Dɛn ne cpet tray ahorow a wɔde di dwuma .

    { CPET tray ahorow a wɔde di dwuma , anaa Crystalline Polyethylene Terephthalate tray ahorow a wɔde di dwuma , yɛ aduane a wɔde kyekyere nneɛma a wɔde thermoplastic ade pɔtee bi na ɛyɛ. CPET yɛ nea wonim no sɛ ɛyɛ nea ɛko tia ɔhyew a ɛkɔ soro ne nea ɛba fam yiye, na ɛma ɛyɛ nea nkurɔfo ani gye ho sɛ wɔde di dwuma wɔ nnuan a wɔde kyekyere nneɛma mu ahorow mu.

  • Q So CPET plastic apampan wotumi to fononoo mu?

    A Yiw, CPET plastic tray ahorow a wɔde di dwuma yɛ nea wotumi to fononoo mu. Wotumi gyina ɔhyew a efi -40°C kosi 220°C (-40°F kosi 428°F) ano, na ɛma wotumi de di dwuma wɔ microwave fononoo, fononoo a wɔtaa de di dwuma, ne nneɛma a wɔde sie nwini mpo mu.

  • Q Nsonsonoe bɛn na ɛwɔ CPET apampan ne PP apampan !

    A Nsonsonoe titiriw a ɛda CPET tray ahorow a wɔde di dwuma ne PP (Polypropylene) tray ahorow a wɔde di dwuma ntam ne wɔn ɔhyew a ɛko tia ne nneɛma a ɛwɔ mu. CPET tray ahorow a wɔde di dwuma yɛ nea ɛko tia ɔhyew kɛse na wobetumi de adi dwuma wɔ microwave ne fononoo a wɔtaa de di dwuma mu, bere a wɔtaa de PP tray ahorow a wɔde di dwuma di dwuma ma microwave dwumadie anaa awɔw mu nneɛma a wɔde sie. CPET ma ɛyɛ den yiye na ɛko tia mpaapaemu, bere a PP tray ahorow a wɔde di dwuma yɛ nea ɛyɛ mmerɛw kɛse na ɛtɔ mmere bi a ebetumi ayɛ nea ne bo nyɛ den.

  • Q Aduan a wɔde kyekyere nneɛma bɛn na wɔde CPET tray ahorow a wɔde di dwuma di dwuma?

    Wɔde { CPET tray ahorow a wɔde di dwuma di dwuma ma nnuan a wɔde kyekyere nneɛma ahorow, a nea ɛka ho ne nnuan a wɔasiesie, nneɛma a wɔde yɛ paanoo, nnuan a wɔahyɛ no nwini, ne nneɛma afoforo a ɛsɛe a ɛhwehwɛ sɛ wɔsan yɛ hyew anaasɛ wɔnoa wɔ fononoo anaa microwave mu.

  • Asɛmmisa CPET ne PET ntam.

    A CPET ne PET nyinaa yɛ polyesters ahorow, nanso ɛsono wɔn su esiane wɔn molecule nhyehyɛe nti. CPET yɛ PET a ɛyɛ ahwehwɛ, a ɛma ɛyɛ den kɛse na ɛko tia ɔhyew a ɛkorɔn ne nea ɛba fam yiye. PET , wɔtaa de yɛ anonneɛ nkotokuo, aduane nkukuo, ne nneɛma foforɔ a wɔde kyekyere nneɛma a ɛnhia sɛ wɔtumi gyina ɔhyeɛ ano saa ara. PET yɛ nea ɛda adi kɛse, bere a CPET taa yɛ nea ɛda adi pefee anaasɛ ɛyɛ nea ɛda adi fã.
HYƐ RFQ A WƆDE NKYERƐKYERƐMU

Momma Yɛnhwehwɛ Plastik Ano Aduru a Ɛfata

Worehwehwɛ plastic krataa so nsɛm s, films, nnuan a wɔde kyekyere nneɛma, anaa ano aduru a wɔayɛ ama wo? Ka wo nneɛma, ne kɛse, dodow, ne nea wopɛ sɛ wode di dwuma kyerɛ yɛn. Yɛn kuw no bɛboa wo ma woapaw ade a ɛfata na wode akansi ho nsɛm ama.
√   Dwumadie ne nsakraeɛ nhyehyɛeɛ
√ Ne kɛseɛ, ne tɛtrɛtɛ ne ne roll format
√ Kɔla, pefeeyɛ ne soro wie
√ Dwumadie, nkrataa, dodoɔ ne baabi a wɔrekɔ
Bisa Yɛn Quotation a Ɛyɛ Paara
Bisa Yɛn Quotation a Ɛyɛ Paara

Yɛn nneɛma ho abenfoɔ bɛboa ama yɛahunu ano aduru a ɛfata ama wo akwammisa krataa no, de nsɛm a wɔafa aka ne berɛ nhyehyɛeɛ a ɛkɔ akyiri abom.

HSQY-PLASTIC-GROUP-logo-fitaa-a ɛda adi
E-mail: chenxiangxm@hgqyplastic.com

Plastik krataa

Tray ahorow

Nneɛma a Wɔde Sie Nsɔano

Mmoa

© COPYRIGHT   2026 HSQY PLASTIC GROUP HO KWAN NYINAA WƆ HƆ.