PVC Rigid Sheet Fɔ Vaykum Tɛrmofɔmin

PVC Rigid Sheet fɔ Vaykum Tɛrmofɔmin

HSQY rigid PVC sheet na fɔ vaykum fɔm ɛn thermoforming aplikeshɔn dɛn lɛk blista pak, klamshɛl, tre, prodak insɛt, kɔva ɛn ɔda fɔm plastic kɔmpɔnɛnt dɛn. Di matirial kɔmbayn rigiditi, dimɛnshɔnal stebiliti ɛn prɛktikal fɔm pefɔmɛns fɔ pak kɔnvɔta, thermoforming kɔmni ɛn industrial plastic prɔsesɔ.

Dis prodak de naw insay lɛk 0.1mm to 3mm tiknes, wit klia, wayt ɛn kɔstɔmayz kɔlɔ opshɔn dɛn. Standart rɛfrɛns dɛn inklud A4, 500 × 765mm ɛn 700 × 1000mm, we ɔda shit dimɛnshɔn ɛn wit dɛn kin tɔk bɔt akɔdin to di tɛmfɔmin mashin, mold saiz ɛn finish-pat rikwaymɛnt.

PVC sheet kin saplae fɔ transparent prodak prɛzɛnteshɔn ɔ sɛlɛkɛt opaque aplikeshɔn dɛn. Surface, tiknes, kala, matirial fɔmyulashɔn, risaykul-kɔntinɛnt rikwaymɛnt ɛn prɔsesin fɔmat fɔ kɔnfɔm akɔdin to di fayn aplikeshɔn pas fɔ tek am se na di sem fɔ ɛvri rigid PVC gred.

PVC rigid sheet prodakt imej dɛn

PVC Vacuum Forming Sheet Spɛsifikeshɔn dɛn

Wetin Na PVC Vaykum Fɔm Shit?

PVC vaykum fɔm shit na rigid tɛmplastik matirial we dɛn kin ɔt te i bi fɔm ɛn afta dat dɛn kin drɔ am agens mold we dɛn de yuz vaykum. Afta di tin dɔn kol, i kin kip di shep we di mold gɛt ɛn dɛn kin trim am insay di pak we dɛn dɔn pak ɔ di plastic pat.

Di prɔses de yuz bɔku bɔku wan fɔ shalo ɛn midul-dip pak pat dɛn, trey, kɔva, displei shel, blista kɔmpɔnɛnt ɛn ɔda fɔm prodak. Klia PVC yusful usay visibiliti tru di finished komponent impɔtant, we opaque ɛn kala matirial dɛn kin pik fɔ ɔda aplikeshɔn dɛn.

Vaykum Fɔm vs Tɛrmofɔmin

Tεmכfכm na di brayt prכsεs fכ hεt tεmכplastik shit εn fכm am fכ tri-dimεnshכnal shep. Vaykum fɔm na kɔmɔn tɛmfɔmin we de yuz vaykum prɛshɔn fɔ pul di PVC sheet we dɔn ɔt agens di mold sɔfays.

Di aprɔpriet prɔses dipen pan pat jɔyometri, kaviti dip, di wɔl-tiknɛs rikwaymɛnt, tul, mashin kɔnfigyushɔn ɛn prodakshɔn volyum. Bayer fɔ gi finish-pat infɔmeshɔn we dɛn de aks fɔ matirial pas fɔ pik PVC jɔs bay nominal tik.

Ki Ficha dɛn fɔ PVC Rigid Sheet fɔ Vaykum Fɔm

• Tεmכfכmabl: Yu kin hεt fayn gred dεm εn fכm insay tri-dimεnshכnal kכmכpכnt dεm we yu de yuz vεkyum כ kompitibl tεmכfכm prכsεs dεm.

• Klia Prodakt Visibiliti: Transparent gred dɛn de alaw fɔ pak prodak ɔ kɔmpɔnɛnt dɛn we dɛn protɛkt fɔ kɔntinyu fɔ si.

• Rigid Finished Parts: PVC de gi strɔkchɔral stiffness afta i dɔn fɔm ɛn kol.

• Kastom Tiknes: Tiknes kin pik akɔdin to fɔm dip, drɔ ratio ɛn finish-pat rigiditi.

• Kastom Dimɛnshɔn: Dɛn kin mach di shit saiz to di dimɛnshɔn fɔ di mold, di eria fɔ klem ɛn di tin dɛn we dɛn nid fɔ trim.

• Surface Options: Glossy ɛn mat surfaces de akɔdin to di matirial gred we yu dɔn pik.

• Kɔlɔ Opshɔn dɛn: Yu kin tɔk bɔt transparent, wayt, opaque ɛn kɔstɔmayt kɔlɔ dɛn.

• Sɛkɔndari Prɔsesin: Dɛn kin kɔt di rayt gred dɛn bak, day kɔt, fold ɔ print afta dɛn dɔn kɔnfyus di prɔses kɔmpatibiliti.

Pεrformεns fכnshכn dεm lεk anti-statik prכpati, UV stεbilizεshכn, fεm bihayv כ aplikεshכn-spεsifi k kכmplians dipכnt pan di fכmyuleshכn we dεn sεlekt εn dεn fכ kכnfכm am sεparat wan.

Aplikeshɔn dɛn fɔ PVC Vaykum Fɔm Shit

Blister Packaging we dɛn kin yuz fɔ mek tin dɛn

Klia rigid PVC kin vaykum fɔm insay transparent blista shel fɔ fayn hadwae, steshɔnari, os, kɔsmɛtik ɛn kɔshɔma-prɔdakt pak. Tiknes fɔ mach to di kaviti dip, paket saiz ɛn rigiditi we dɛn nid.

Klamshell we dɛn kin pak

PVC kin fכm insay hinged klamshεl usay visibiliti, shep rεtεnshכn εn wan rigid fכm strכkchכ nid. Hinge dizayn ɛn fɔm dip fɔ ɛvaluet togɛda wit sheet tiknes.

Trey ɛn Insɛt dɛn we gɛt Tɛmofɔm

Rigid PVC kin fɔm insay prodak trey, pozishɔn insɛt, intanɛnt pak kɔmpɔnɛnt ɛn ɔda shep pat dɛn fɔ fayn aplikeshɔn dɛn.

Display Kɔva ɛn Protɛktiv Kɔmpɔnɛnt dɛn

Klia ɛn opak PVC kin evalyu fɔ fɔm displei shel, protɛktiv kɔva ɛn ɔda industrial kɔmpɔnɛnt dɛn usay di jɔyometri we dɛn nid kɔmpitabl wit vaykum fɔm.

Aplikeshɔn dɛn we dɛn dɔn pik fɔ pak it

Aplikeshɔn-spɛsifi k PVC gred dɛn kin evalyu fɔ sɔm sɛlɛkɛt it-pak kɔmpɔnɛnt dɛn. Fɔd-kɔntakt suitability fɔ kɔnfyus fɔ di ɛksaktɔ fɔmyulashɔn, pak it, kɔntakt tɛmpracha, kɔntakt durayshɔn ɛn dɛstineshɔn-maket rikwaymɛnt.

Vaykum Fɔm Aplikeshɔn Imej dɛn

Aw fɔ Pik PVC Tiknɛs fɔ Vaykum Fɔm

Di ɔrijinal sheet tik na wan tin nɔmɔ we de mek di kɔmpɔnɛnt we dɔn dɔn. we dεn de fכm, PVC de strεch oba di mold εn di mεtirial kin tכn na dip kכva dεm, kכna dεm εn ay-drכ εria dεm.

Fɔ nyu mold ɔ nyu PVC spɛsifikɛshɔn, dɛn kin rikɔmɛnd fɔ tray fɔm bifo volyum prodakshɔn fɔ verify di ɔt bihayvya, kaviti difinishɔn, di wɔl-tiknɛs distribyushɔn, trim, klia ɛn finish-pat rigiditi.

Virgin PVC vs Risaykul-Kɔntinɛnt PVC

Virgin PVC ɛn sɔm sɛlɛkɛt risaykul-kɔntinɛnt fɔmyulashɔn dɛn kin tɔk bɔt akɔdin to di aplikeshɔn we dɛn bin want. Matirial sɛlɛkshɔn fɔ tink bɔt klia, kɔlɔ kɔnsistɛns, mɛkanikal pefɔmɛns, fɔm bihayvya ɛn ɛni rigyuletɔri rikwaymɛnt.

We dɛn nid fɔ mek optik apia, kɔntakt we dɛn rigyulayt ɔ tayt kɔntrol pefɔmɛns, dɛn fɔ gri wit di rayt fɔmyulashɔn ɛn sɔpɔtin dɔkyumentri bifo dɛn ɔda. Risaykul-kɔntinɛnt gred nɔ fɔ ɔtomɛtik trit as intachɛnjabl wit vajin PVC fɔ ɛvri aplikeshɔn.

Fɔd-Kɔntakt ɛn Rɛgyulayt Aplikeshɔn dɛn

Jɛnɛral SGS tɛst, ISO manejmɛnt sɛtifiket ɔ RoHS-rilayt dɔkyumentri nɔ de bay dɛnsɛf establish se ɛvri rigid PVC gred fayn fɔ dairekt it kɔntakt.

Fɔ it, mɛdikal, famasi ɔ ɔda rigyulayt aplikeshɔn dɛn, di wan dɛn we de bay fɔ gi di prɔdak we dɛn want, di kɔntakt kɔndishɔn, tɛmpracha, di tɛm we dɛn fɔ tek ɛn di say we dɛn want fɔ go na di makit so dat dɛn go ebul fɔ evalyu di rayt PVC fɔmyulashɔn ɛn di sɔpɔtin dɔkyumɛnt dɛn we de.

Infɔmeshɔn we dɛn nid fɔ mek wan Vaykum Fɔm Kɔt

• Tik we dɛn nid

• Shit wit ɛn lɔng

• Sheet ɔ rol saplai fɔmat

• Klia, wayt, opaque ɔ kɔstɔmayt kɔlɔ

• Glossy ɔ mat surface

• Virgin ɔ risaykul-kɔntinɛnt rikwaymɛnt

• Finish-pat dimɛnshɔn dɛn

• Maksimal fɔm dip

• Mold ɔ cavity drawing if i de

• Vaykum fɔm ɔ thermoforming mashin tayp

• Rigiditi we dɛn nid fɔ dɔn-pat

• Prodakt we dɛn pak ɔ ɛnd yus

• Ɛni rikwaymɛnt fɔ kɔntakt we dɛn dɔn rigul

• Teknikal dɔkyumɛnt dɛn we dɛn nid

• Initial ɔda kwantiti ɛn ɛstimat ɛni ia dimand

• Di kɔntri ɔ pɔt usay dɛn de go

PVC Rigid Sheet Teknik Dokumɛnt dɛn

Dɛn dɔn gi di tɛknikal dɔkyumɛnt dɛn we dɔn de fɔ rifer to. Kɔnfɛm se ɛni dɔkyumɛnt de aplay to di ɛksaktɔ PVC gred ɛn spɛsifikɛshɔn we dɛn de bay.

PVC rigid sheet pakej

Pakɛj ɛn Delivri

• Sampul Pak: A4-sayz rigid PVC sɛmpul dɛn kin pak insay protɛktiv bag ɛn katon.

• Sheet Packaging: Dɛn kin protɛkt ɛn palet di shit dɛn akɔdin to di dimɛnshɔn ɛn di tin dɛn we dɛn nid fɔ ship.

• Rol Packaging: Na lɛk 50kg pan wan rol usay rol saplae de aplay, ɔ akɔdin to di tin dɛn we dɛn dɔn kɔnfyus.

• Palet Palet: Na lɛk 500–2000kg pan wan plai wud palet dipen pan di prɔdak dimɛnshɔn ɛn pak kɔnfigyushɔn.

• Kɔntinɛnt Lod: Lod kwantiti dipen pan shit ɔ rol dimɛnshɔn, palet kɔnfigyushɔn ɛn kɔntena tayp.

• Dilivri Tɛm: EXW, FOB, CNF ɛn DDU.

• Tipik Lid Taym: Na lɛk 10–14 dez afta dɛn dɔn kɔnfyus dipɔsit, we de ɔnda di spɛsifikɛshɔn ɛn ɔda volyum.

Sɛtifiket ɛn Kwaliti Dokumɛnt dɛn

Di sɛtifiket dɛn we de, di manejmɛnt-sistim dɔkyumɛnt dɛn ɛn di tɛst ripɔt dɛn fɔ mach to di ɛksaktɔl PVC gred we dɛn de gi. Di wan dɛn we de bay we nid wan patikyula standad ɔ rigyuletɛd-yuz dɔkyumɛnt fɔ put da rikwaymɛnt de wit di kwɛstyɔn.

Globɛl Ɛgzibishin dɛn

HSQY Plastic Group de tek pat pan intanashɔnal ɛgzibishin fɔ mit pak manifakta dɛn, thermoforming kɔmni dɛn, distribyushɔn dɛn, plastic kɔnvɔta dɛn ɛn ɔda pɔshɔnal bayer dɛn.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PVC Vacuum Forming Sheet

Rigid PVC fit fɔ mek vaykum?

Yɛs. Suitabl rigid PVC gred dɛn kin ɔt ɛn drɔ agens wan mold yuz vaykum fɔ prodyuz fɔm pak ɛn plastic kɔmpɔnɛnt dɛn. Fɔm kɔndishɔn fɔ mach to di PVC gred we yu dɔn pik ɛn pat jɔyometri.

Us tik tik dɛn de?

di prodakt we de naw dεn list am insay lεk 0.1mm to 3mm tiknes. di aprכpriet tiknes dipכnt pan di kaviti dip, dro rεshכn, pat saiz εn rikwayd finish-pat rigiditi.

Yu kin yuz klia PVC fɔ pak klamshɛl ɛn blista?

Yɛs. Dɛn kin yuz klia rigid PVC fɔ fayn blista shel, klamshɛl, trey ɛn displei pak usay dɛn nid fɔ si di prɔdak ɛn rigid fɔm kɔnstrɔkshɔn.

Wetin na di difrɛns bitwin vaykum fɔm ɛn thermoforming?

Tεmכfכm na di jεnarכl prכsεs fכ hεt εn fכm tεmכplastik shit. Vaykum fכm na tεmכfכm mεtכd we de yuz vεkyum prεshכn fכ pul di PVC we dεn hεt agens di mכld.

Yu tink se dɛn kin gi PVC sheet insay kɔstɔm saiz dɛn?

Yɛs. Standart rɛfrɛns dɛn inklud A4, 500 × 765mm ɛn 700 × 1000mm, we dɛn kin tɔk bɔt di kɔstɔmayz dimɛnshɔn dɛn akɔdin to di fɔm ikwipmɛnt, mold ɛn ɔda spɛsifikɛshɔn.

Yu tink se PVC we gɛt tin dɛn we dɛn dɔn risaykul de?

Dɛn kin tɔk bɔt sɔm sɛlɛkɛt risaykul-kɔntinɛnt PVC fɔmyulashɔn dɛn fɔ fayn aplikeshɔn dɛn. Di avaylabl ɛn pefɔmɛns fɔ kɔnfɔm akɔdin to transparency, kɔlɔ, fɔm rikwaymɛnt ɛn ɛni rigyuletɔri ristrikshɔn.

Ɛvri PVC vaykum fɔm sheet fayn fɔ kɔntakt it?

Nɔ. Fɔd-kɔntakt suitability dipen pan di ɛksaktɔ PVC fɔmyulashɔn, aditiv, pak it, kɔntakt kɔndishɔn ɛn dɛstineshɔn-maket rikwaymɛnt. Wan aplikeshɔn-spɛsifi k gred ɛn sɔpɔtin dɔkyumentri fɔ kɔnfɔm bifo yu yuz am.

A kin aks fɔ sampul fɔ vaykum fɔm tɛst?

Dɛn kin tɔk bɔt sampul matirial akɔdin to di tik, saiz ɛn gred we de. I fayn fɔ tɛst ripɔtmɛnt matirial wit di mold we dɛn want ɛn fɔm ikwipmɛnt bifo dɛn prodyuz am fɔ kɔmɛshɔn.

Wetin na di minimum ɔda kwantiti?

Di prodak list we de naw de spɛsifa wan minim ɔda kwantiti we na 1000kg. Kɔlɔ, fɔmyulashɔn ɔ spɛshal dimɛnshɔn dɛn we dɛn kɔstɔmayt kin nid difrɛn prodakshɔn kwantiti.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi tik, shit dimɛnshɔn, kɔlɔ, sɔfa, matirial rikwaymɛnt, finish-pat dimɛnshɔn, maksimal fɔm dip, mashin tayp, ɛnd yus, di dɔkyumɛnt dɛn we yu nid, ɔda kwantiti ɛn ples fɔ go. Wan drɔin ɔ sampul fɔ di pat we dɛn dɔn fɔm kin fayn bak.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae rigid PVC sheet ɛn ɔda plastic matirial fɔ vaykum fɔm, thermoforming, pak, printin ɛn industrial kɔnvɛnshɔn. Klia, wayt, kala ɛn aplikeshɔn-spɛsifi k PVC gred dɛn de fɔ manifakta, tɛmfɔma, kɔnvɔta ɛn distribyushɔn.

Fɔ vaykum-fɔmin projɛkt, HSQY kin tɔk bɔt tik, shit dimɛnshɔn, kɔlɔ, sɔfa, matirial fɔmyulashɔn, fɔm dip, sampul, tɛnki dɔkyumɛnt, pak ɛn bɔlk-ɔda rikwaymɛnt akɔdin to di kɔstɔma in prodakshɔn prɔses.