PET/AL/PE Lamineshɔn Film

PET/AL/PE High-Barrier Lamination Film Manufacturer fɔ di wan dɛn we de mek di fim

HSQY de mek PET/AL/PE ay-baria lamination film fɔ kɔfi, ti, snek, dray it, pauda, ​​spays, nyutrishɔnal prodak, pet it, famasitik sachet ɛn mɔstɔ-sɛnsitiv industrial pak.

PET/AL/PE na wan multilayer fleksibul pakej strɔkchɔ we gɛt wan ɔda polyethylene terephthalate film, wan midul aluminiɔm fɔyl barɛri ɛn wan insay polyethylene heat-sealing layt.

Di PET layt de gi mɛkanikal trɛnk, dimɛnshɔnal stebiliti ɛn wan say we dɛn kin print. Di aluminiɔm fɔyl de gi di praymar barɛri agens ɔksijɛn, wata vaypa ɛn layt. Di PE layt de gi fleksibiliti, prodak-kɔntakt protɛkshɔn ɛn ɔt-silin pefɔmɛns.

Di laminat na opaque bikɔs i gɛt tru tru aluminiɔm fɔyl. Di tin dɛn we dɛn nɔ print nɔmal fɔ gɛt silva mɛtal apia, we di pak we dɛn dɔn pak kin rivas print wit kɔstɔmayt kɔlɔ, grafik, prɔdak infɔmeshɔn ɛn branding.

HSQY de pablish wan totɛl tiknɛs rɛnj we de lɛk 0.045mm to 0.35mm ɛn wit frɔm lɛk 160mm to 2600mm. Aktual prodakshɔn fisibiliti dipen pan di wan wan layt tiknes, aluminiɔm fɔyl gej, printin wit, lamination prɔses, slitin kapabiliti, rol dayamita ɛn pak-mashin rikwaymɛnt.

PET/AL/PE film kin saplae as print ɔ unprinted rol stok ɛn kɔnvɔyt am to sachet, flat pauch, sɛnta-sil bag, gusseted bag, stand-ap paush ɛn ɔda kɔstɔmayz fleksibul pak fɔmat.

Standard PET/AL/PE nɔ fɔ yuz ɔtomɛtik wan fɔ retort sterilization, boiling ɔ ɔda ay-tɛmpracha prɔsesin. Ritort aplikeshɔn dɛn nid fɔ gɛt wan dediket ay-tɛmpracha strɔkchɔ, silant ɛn adeziv sistem.

Ɛksplɔrɔ ɔda tin dɛn metal lamination films ɛn kɔstɔm-print kɔmpɔzit fim dɛn fɔ fleksibul pak aplikeshɔn dɛn.

Rikwest PET/AL/PE Film Prayz    Rikwest Film Samples

PET/AL/PE Lamineshɔn Film Imej dɛn

Wetin Na PET/AL/PE Lamineshɔn Fim?

PET/AL/PE lamination film na fleksibul pak matirial we dɛn mek bay we dɛn bon polyɛsta film, aluminiɔm fɔyl ɛn polyethylene film ɔ kɔt insay wan singl multilayer strɔkchɔ.

di strכkchכ dεn kin pik we wan prodak nid strכng protεkshכn εgεst כksijεn, mכsichכ εn layt pas aw כdinari transparent plastic laminat kin nכmal fכ gi.

Di film dɛn nɔmal fɔ bon yuz wan dray-laminɛshɔn, sɔlvɛnt-fri-laminɛshɔn, ɛkstrushɔn-laminɛshɔn ɔ ɔda aprɔv kɔnvɔtin prɔses akɔdin to di strɔkchɔ ɛn pefɔmɛns we dɛn nid.

Faynal pakej pefɔmɛns dipen pan di wan wan film dɛn, aluminiɔm fɔyl tiknɛs, adeziv, kɔrɛkt kɔndishɔn, PE silan fɔmyulashɔn, printin sistem, pakej shep ɛn silin kwaliti.

Struktur fɔ PET/AL/PE Lamineshɔn Film

PET Ɔta Layer

Di ɔda PET film de gi tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, abrashɔn rɛsistɛns ɛn wan smol sɔfays fɔ ay-kwaliti printin.

Rivas printin de put di ink bitwin di PET film ɛn di nɛks layt, we de ɛp fɔ protɛkt di grafik dɛn we dɛn print frɔm dairekt abrashɔn we dɛn de kɔnvɔyt, transpɔt ɛn kɔshɔma handel.

Aluminium foil barrier layer

Di aluminiɔm fɔyl de gi di praymar barɛri agens ɔksijɛn, wata vapour, ɔltra vayolɛt layt ɛn layt we pɔsin kin si.

Fɔyl tik fɔ pik akɔdin to di barɛri we dɛn nid, di pakej fleksibiliti, folding resistans, pankchɔ risk ɛn kɔst.

Pinhol kondishɔn, kris, fleks krak ɛn paket damej kin ridyus di ifɛktiv barɛri fɔ di finish laminate ɛn dɛn fɔ evalyu am we dɛn de tɛst.

PE Inner Hɛt-Silin Layer

di PE insay layt de gi fleksibiliti εn i de mek di laminate fכm wan hεt sil we dεn de mek bag, fulכp כ fainal pakej kכloshכn.

Dɛn fɔ pik di silan fɔmyulashɔn akɔdin to di prɔdak, fil tɛmpracha, ɔyl ɔ paoda kɔntaminɛshɔn, silin tɛmpracha, prɛshɔn, di tɛm we i de de, di layn spid ɛn di sil trɛnk we dɛn nid.

Laminating Adhesive we yu kin yuz

Adhesive de bon di PET, aluminium foyl ɛn PE layers togɛda ɛn i de afɛkt di lamination strength, kemikal resistans, ol, smel ɛn tempɔret pefɔmɛns dairekt wan.

Di adeziv sistɛm ɛn di kɔndishɔn fɔ mɛn di it fɔ fayn fɔ di it, di we aw dɛn de fil, di tɛm we dɛn de kip am ɛn di tɛmpracha we dɛn want fɔ mek.

PET/AL/PE Lamineshɔn Film Spɛsifikeshɔn dɛn

Ki ficha dɛn fɔ PET Aluminium Foil PE Film

• Ay barɛri protɛkshɔn: Aluminium fɔyl de gi strɔng protɛkshɔn agens ɔksijɛn, wata vapour ɛn layt.

• Aroma retention: Di strɔkchɔ de ɛp fɔ ridyus di lɔs fɔ volatile aromas frɔm kɔfi, ti, spays ɛn pauda prodak dɛm.

• Opaque light barrier: Di foyl layt de protɛkt di prɔdak dɛm we de sɛnsitiv layt ɛn mek i tan lɛk mɛtal.

• Printable outer surface: PET de sɔpɔt ditayla grafik, branding, barɔd ɛn prodak infɔmeshɔn.

• Hɛt-silin pefɔmɛns: Di PE layt de sɔpɔt pauch mek ɛn fayn pakej silin.

• Mɛkanikal riinfɔsmɛnt: PET de ɛp fɔ protɛkt di aluminiɔm fɔyl frɔm ɔdinari strɛch ɛn handel strɛs.

• Mɔstɔ ɛn gris rɛsistɛns: Dɛn kin pik di insay strɔkchɔ fɔ dray, ɔyl ɔ aromat prɔdak dɛm.

• Kastom kɔnvɔyt: Dɛn kin slit di fim, print am ɛn kɔnvɔyt am to bɔku bɔku pak fɔmat dɛn.

PET/AL/PE vs. Ɔda Ay-Baria Strukchɔ dɛn

Barrier Performance ɛn Aluminium Foil Intɛgriti

Aluminium foyl na di men barɛri layt, bɔt dɛn nɔ kin ebul fɔ no di baria pefɔmɛns we dɛn dɔn pak frɔm di matirial nem nɔmɔ.

Aktual oksijεn εn wata-vapour transmishכn dipכnt pan di fכyl tik, pinhol, lamination kwaliti, foldin, fleks krak, pauch sil, valv, zip εn eni mεkanikal damej.

Dɛn fɔ mɛzhɔ di OTR ɛn WVTR valyu dɛn bay we dɛn yuz di fayn aprɔv laminat ɛn di tɛmpracha ɛn humiditi kɔndishɔn dɛn we dɛn gri pan.

Hɛt-Silin Pɔfɔmɛnshɔn

Hɛt-silin pefɔmɛns dipen pan di PE silin fɔmyulashɔn, silin tɛmpracha, prɛshɔn, dwɛl tɛm, jaw dizayn ɛn pak-layn spid.

Pauda, ​​ɔyl, spays patikyula ɔ prɔdak rɛsɛdyu na di sil eria kin ridyus di sil trɛnk ɛn inkrisayz di risk fɔ lik.

• Ditarmin di hεt-sil initiashכn tεmprachכ.

• Difayn di validet ɔpreshɔn sil winda.

• Mekɔp di sil trɛnk na rum ɛn stɔrɔj ​​tɛmpracha.

• Evaluate hot-tack strength pan ay-spid pak layn dɛn.

• Test siling tru di ɛkspɛkt pauda, ​​ɔyl ɔ mɔstɔ kɔntaminɛshɔn.

• Inspek chanɛl lik, wrinkles, bɔn ɛn sil distɔrshɔn.

• Du burst, vacuum, dye-penetration ɔ ɔda integriti tɛst we dɛn gri pan.

PET/AL/PE Film Fit fɔ Ritɔt Pakɛj?

Standard PET/AL/PE film nɔ fɔ yuz ɔtomɛtik wan fɔ retort sterilization, ay-tɛmpracha bɔyl ɔ prɛshɔn kuk.

Ritort pak nɔmal wan nid fɔ gɛt insay sial we nɔ de ɔt lɛk CPP ɔ RCPP, wan retort-grɛd adeziv ɛn wan ɔda strɔkchɔ we ebul fɔ kip di bond trɛnk ɛn di pakej intɛgriti we i de pan ɔt, prɛshɔn ɛn mɔstɔ.

Posisibul ritort strɔkchɔ dɛn inklud PET/AL/RCPP, PET/NY/AL/RCPP ɛn ɔda prɔjek-spɛsifi k laminat dɛn.

Di fainal pakej fɔ validet yuz di aktual it, asid, ɔyl kɔntinyu, sterilizeshɔn tɛmpracha, sterilizeshɔn tɛm, prɛshɔn, kol prɔses ɛn shelf-layf target.

PET/AL/PE Film fɔ Kɔfi Pakɛj

PET/AL/PE na tin we dɛn kin pik fɔ ɔl-bin kɔfi, grɔn kɔfi ɛn instant kɔfi bikɔs di fɔyl layt de gi protɛkshɔn agens ɔksijɛn, mɔstɔ ɛn layt.

Kɔfi we dɛn jɔs ros kin pul kabon dayɔgzayd afta dɛn dɔn rost am. So fɔ pak di kɔfi we gɛt ɔl bin nid fɔ gɛt wan we fɔ pul di gas we de mek di gas kɔmɔt na di bag we i de mek di ɔksijɛn we de na do nɔ go insay.

• Wul-bin, grɔn ɔ instant kɔfi fɔmat.

• Kofi roast date ɛn degassing profayl.

• Shelf layf we dɛn nid ɛn tɛmpracha fɔ kip.

• Wan-way degassing valv rikwaymɛnt.

• Zipa, tin tay ɔ ɔda tin we dɛn nid fɔ mek fɔ lɔk bak.

• Bag format ɛn net wet.

• Aroma ritɛnshɔn ɛn ɔksijɛn target.

• Drop, burst ɛn transpɔt tɛst.

Aplikeshɔn dɛn fɔ PET/AL/PE Lamineshɔn Film

• Kɔfi pak: Ɔl bins, grɔn kɔfi, instant kɔfi ɛn prɔdak dɛn we dɛn kin gi wan tɛm.

• Ti pak: Ti we gɛt lɔs lif, ti paoda, ɛbul ti ɛn sachet.

• Snek we dɛn pak: Nat, dray frut, krak krak, chips, kuki ɛn it dɛn we dɛn dɔn frɛsh.

• Paoda pak: Milk paoda, protin paoda, nyutrishɔnal paoda, drink miks ɛn sizin paoda.

• Spays ɛn tin dɛn we dɛn kin yuz fɔ mek di it: Ɛrb, flawa, yist, aditiv ɛn tin dɛn we kin mek pɔsin fil wet.

• Pɛt it we dɛn pak: Dray pet it, pet trit, sɔpɔtmɛnt ɛn pauda animal nyutrishɔn.

• Famasiutik pak: Tablɛt, kapsul, paoda ɛn granul we de yuz wan aprɔv famasitik strɔkchɔ.

• Mɛdikal pak: Prodakt dɛn we nɔ gɛt mɔstɔ we dɛn fɔ klin ɛn validet fɔ di aplikeshɔn.

• Indastrial pak: Ilɛktronik kɔmpɔnɛnt dɛn, kemikal dɛn, dɛsikɛnt dɛn ɛn matirial dɛn we nɔ de mek wata.

Rol Stok ɛn Pakɛj Fɔmat dɛn

PET/AL/PE film kin bi saplae as rol stok fɔ fleksibul pak kɔnvɔta, pauch manifakta ɛn ɔtomatik filin layn.

• Vɛtikal fɔm-fil-sil rol stok.

• Horizontal fom-fil-sil rol stok.

• Stik-pak ɛn sachet film.

• Tri-sayd-sial paus dɛn.

• Fo-sayd-sial paus dɛn.

• Bag dɛn we gɛt sɛnt-sil ɛn fin-sil.

• Flat paus dɛn we dɛn kin yuz.

• Sayd-gusset ɛn kwad-sil bag dɛn.

• Paus dɛn we pɔsin kin tinap fɔ.

• Zipa, valv ɛn kɔstɔm-aksesɔri paus dɛn.

Kastom Printin ɛn Atwok Rikwaymɛnt dɛn

Kastom rivas printin kin aplay to di PET layt fɔ branding, rigyuletɔri infɔmeshɔn, barɔd, pripia instrɔkshɔn ɛn dɛkɔretiv grafik.

Fɔd-Kɔntakt ɛn Rigyuletɔri Rikwaymɛnt dɛn

Fɔd-kɔntakt suitabiliti dipen pan di fayn aprɔv laminat pas ɔl di PET, aluminiɔm fɔyl ɔ PE matirial nem dɛn.

Di asɛsmɛnt fɔ inklud di PET film, PE silan, aluminiɔm fɔyl tritmɛnt, laminating adhesive, printin ink, pigmɛnt, prayma, aditiv ɛn manufakchurin prɔses.

Di wan dɛn we de bay fɔ no di kayn it, dairekt ɔ indayrɛkt kɔntakt, filin tɛmpracha, stɔrɔj ​​tɛmpracha, kɔntakt durayshɔn, intended ɔt prɔses ɛn dɛstineshɔn makɛt.

Di dɔkyumɛnt dɛn we dɛn kin yuz kin inklud diklareshɔn fɔ kɔmplians, fɔmyulashɔn stetmɛnt, maykreshɔn tɛst ripɔt, rɛsɛdyual-sɔlvɛnt ripɔt ɛn sɔpɔtin rigyuletɔri infɔmeshɔn.

Dɛn fɔ diskrayb SGS akɔdin to di ɛksaktɔl tɛst we dɛn du. Wan jenɛral SGS ɔ ISO sɛtifiket nɔ de indipɛndɛnt fɔ establish fud-kɔntakt, ritɔt, barɛri ɔ shelf-layf pefɔmɛns.

Famasiutik ɛn Indastrial Pakɛj

Famasi, mɛdikal ɛn industrial pak kin nid fɔ gɛt tayt kɔntrol pas ɔdinari it ɛn dray-guds pak.

• Batch traceability ɛn chenj kɔntrol.

• Klin ɛn kɔntaminɛshɔn kɔntrol.

• Ekstraktabl ɛn maykreshɔn ɛvalueshɔn.

• Rizidul-sɔlvɛnt limit dɛn.

• Mɔstɔ ɛn ɔksijɛn barɛri validɛshɔn.

• Pankchɔ, fleks-krak ɛn sil-intɛgriti tɛst.

• Akselerat ɛn rial-taym stebiliti stɔdi.

• Prodakt-spɛsifi k rigyuletɔri dɔkyumentri.

Risayklɛbiliti ɛn Ɔda Strukchɔ dɛn

PET/AL/PE na wan laminat we gɛt bɔku tin dɛn we gɛt polyɛsta, aluminiɔm, poliɛtilin ɛn adeziv.

Dɛn layers ya at fɔ separet insay kɔvɛnshɔnal mɛkanikal risaykul sistɛm, so di paket nɔ fɔ ɔtomɛtik diskrayb as risaykul.

Aktual rikavari opshɔn dɛn dipen pan lokal kɔlɛkshɔn, sɔt, spɛshal risaykul prɔses, ink, adeziv, aksesɔri ɛn di kɔmplit paket dizayn.

Ɔltɛrnativ strɔkchɔ dɛn lɛk mono-PE, mono-PP, transparent kɔt barɛri film ɔ mɛtalayz fim kin evalyu we risaykul, lɔwa wet ɔ prodak visibiliti na prɔjɛkt prayoritɛd.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• Matirial strɔkchɔ ɛn layt idɛntifikeshɔn.

• Total tiknes ɛn individyual layt tiknɛs.

• Aluminium foil gej ɛn pinhol inspekshɔn.

• Rol wit, lɔng, dayamita, wet ɛn kɔr saiz.

• Winding dairekshɔn, rol tɛnsiɔn, tɛliskɔp ɛn ed alaynɛshɔn.

• Tensile strength, elongation ɛn pankchɔ rɛsistɛns.

• Fleks-krak rɛsistɛns.

• Lamineshɔn bond trɛnk.

• Curing ɛn rɛsɛdyual-sɔlvɛnt tɛst.

• Printin kɔlɔ, rɛjista ɛn ripit lɔng.

• Ink adhesion, rub resistans ɛn blok.

• OTR ɛn WVTR ɔnda spɛsifikɛd kɔndishɔn dɛn.

• Layt-transmishɔn ɔ opasiti tɛst usay dɛn nid am.

• Hɛt-sil initiashɔn tɛmpracha.

• Sil trɛnk ɛn hot-tak pefɔmɛns.

• Sil-thru-kɔntaminɛshɔn tɛst.

• Bɔst, drɔp, kɔmpreshɔn ɛn lik tɛst.

• Valv, zip ɛn aksesɔri intɛgriti tɛst.

• Maygrɛshɔn tɛst usay i apɔynt.

• Stɔrej ɛn shelf-layf validɛshɔn.

• Pak, palet ɛn kɔntena-lod inspekshɔn.

Infɔmeshɔn we dɛn nid fɔ mek pɔsin gɛt PET/AL/PE Film Quote

• Prodakt we dɛn pak ɛn net wet.

• Fɔd, famasitik ɔ industrial aplikeshɔn.

• Shelf layf we dɛn nid ɛn di kɔndishɔn fɔ kip tin dɛn.

• Filin tempɔret ɛn sial tɛmpracha.

• Eni boiling, pasteurization ɔ retort prɔses.

• Rikwayd OTR, WVTR ɛn layt-baria target.

• PET, foil ɛn PE layt tiknɛs dɛn we dɛn kin lɛk.

• Rikwayd totɛl tik ɛn tolɛreshɔn.

• Film wit ɛn wit tolɛreshɔn.

• Packaging format ɛn bag dimɛnshɔn dɛn we dɔn dɔn.

• Packaging-machine manifakta ɛn mɔdel.

• Mashin spid ɛn silin-jaw kɔnfigyushɔn.

• Kor dayamita ɛn maksimal rol dayamita.

• Maksimal wet we di rol gɛt.

• Printin artwok ɛn kɔlɔ kɔnt.

• Ripit lɔng, ay mak ɛn waynd dairekshɔn.

• Valv, zip, spɔt ɔ tear-notch rikwaymɛnt.

• Destination market ɛn di kɔmplians dɔkyumɛnt dɛn we dɛn nid.

• Initial ɔda kwantiti ɛn ɛni ia fɔkɔs.

• Packing, destination port ɛn di de we dɛn aks fɔ di delivri.

Send Yu Lamination Film Rikwaymɛnt dɛn

Sɛtifiket ɛn Kwaliti Dokumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt tɛknikal data shit, sefty data shit, fud-kɔntakt diklareshɔn, maykreshɔn ripɔt, ristrikt-sɔbstans ripɔt, rɛsɛdyual-sɔlvɛnt ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Ɛni dɔkyumɛnt fɔ kɔrɛkt to di fayn PET/AL/PE strɔkchɔ, printin sistem, adeziv, PE silan, di say we dɛn mek am ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz.

Dɛn nɔ fɔ trit wan jenɛral kɔmni sɛtifiket as pruf fɔ wan patikyula OTR, WVTR, retort retinj, it-kɔntakt kɔndishɔn ɔ paket shelf layf.

HSQY Globɛl Ɛgzibishin dɛn

HSQY de prɛzɛnt fleksibul pak fim, liding film, it tre, plastic shit ɛn kɔstɔmayz pak sɔlvishɔn na intanashɔnal ɛgzibishin.

Prodakshɔn ɛn Pak

Pak ɛn Delivri

Sampul pak: Dɛn kin pak smɔl smɔl rol ɛn film sɛmpul dɛn insay bag dɛn we de protɛkt dɛn, katon ɔ bɔks dɛn we strɔng.

Bulk roll packing: Dɛn kin rap di rol dɛn wit protɛktiv PE film, kraft pepa, mɔstɔ-rɛsistɛns matirial ɔ ɔda we we dɛn gri fɔ pak.

Kor ɛn rol protɛkshɔn: Dɛn kin protɛkt pepa kɔr, rol ɛnd ɛn fim ed akɔdin to di rol wet ɛn shipmɛnt rikwaymɛnt.

Palet pak: Na lɛk 500-2000kg kin pak pan plai wud ɔ fumigation-fri palet, i dipen pan di rol dimɛnshɔn ɛn di limit fɔ handel.

Kɔntena lod: Wan rɛfrɛns lod kwantiti na lɛk 20 tan, we de ɔnda di rol spɛsifikɛshɔn, palet dizayn ɛn ligal kɔntena-weyt limit.

Fɔ kip di fim: Stɔr di fim na klin, dray insay os we nɔ gɛt dairekt san, ɔt pasmak, mɔs, dɔst ɛn strɔng smel.

Dilivri tɛm: EXW, FOB, CNF, CIF, DDU ɛn ɔda Incoterms we dɛn gri fɔ tɔk bɔt.

Lid tɛm: Standart prodakshɔn jɔs nid lɛk 10-14 wok dez afta dɛn dɔn kɔnfyus strɔkchɔ, printin, artwok, kwantiti ɛn pemɛnt.

Wetin Mek Yu Pik HSQY as Yu PET/AL/PE Film Splaya?

• PET, aluminium foyl ɛn PE ay-baria strɔkchɔ dɛn.

• Customized layt tiknes ɛn totɛl film tiknes.

• Rol stok we dɛn print ɛn we nɔ print.

• Kastom rivas printin ɛn mɛtal dizayn ifɛkt dɛn.

• Customized film width, kor, rol dayamita ɛn winding dairekshɔn.

• Strukchɔ fɔ kɔfi, it paoda, pet it ɛn industrial pak.

• Sampul ɛn trayal rol fɔ mashin ɛn silin tɛst.

• Barɛri, bond, printin ɛn sil-tɛst sɔpɔt.

• Kastom pauch ɛn fleksibul pak fɔmat dɛn.

• Ekspɔt pak ɛn intanashɔnal B2B delivri sɔpɔt.

Bifo bulk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di laminat we yu dɔn pik yuz di kɔstɔma in aktual prodak, pak mashin, siling kɔndishɔn, stɔrɔj ​​kɔndishɔn ɛn finish pakej fɔmat.

Kontakt HSQY fɔ Sampul ɛn Prayz

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PET/AL/PE Film

Wetin na PET/AL/PE lamineshɔn fim?

Na wan multilayer fleksibul pakej matirial we gɛt wan PET ɔda layt, wan aluminiɔm fɔyl barɛri ɛn wan PE ɔt-silin layt.

Wetin ɛni PET/AL/PE layt de du?

PET de gi trɛnk ɛn printabiliti, aluminiɔm fɔyl de gi di men ɔksijɛn, mɔstɔ ɛn layt barɛri, ɛn PE de gi fleksibiliti ɛn ɔt silin.

Yu tink se PET/AL/PE fim transparent?

Nɔ, tru tru aluminiɔm fɔyl nɔ de shayn, so di laminat we dɛn nɔ print nɔmal fɔ gɛt silva mɛtal.

Us prɔdak dɛn kin pak insay PET/AL/PE fim?

Di kɔmɔn aplikeshɔn dɛn na kɔfi, ti, snek, nɛt, dray it, spays, nyutrishɔnal paoda, it fɔ animal dɛn, famasitik ɛn mɔstɔ-sɛnsitiv industrial prodak dɛm.

PET/AL/PE fayn fɔ pak kɔfi?

Yɛs. I de gi layt, ɔksijɛn ɛn mɔstɔ protɛkshɔn. Kɔfi we dɛn jɔs ros wit ɔl bin kin nid bak fɔ gɛt wan-way valv we de pul di gas.

PET/AL/PE de gi wan kɔmplit ɔksijɛn barɛri?

Aluminium foyl de gi wan rili strɔng ɔksijɛn barɛri, bɔt di aktual finish-pakɛj pefɔmɛns dipen pan fɔyl pinhol, fleks krak, sil, valv, zip ɛn pakej damej.

Wetin na OTR ɛn WVTR?

OTR de mכsu כksijεn transmishכn, we WVTR de mכsu wata-vapour transmishכn. Ɔl tu di valyu dɛn fɔ no di we aw dɛn de tɛst, di tɛmpracha, di humiditi ɛn di laminat strɔkchɔ.

Wetin mek aluminiɔm fɔyl laminat kin lɔs barɛri pefɔmɛns?

Pinhol difεkt, ripit fold, fleks krak, delamination, pankshכn εn po paket sil kin ridyus ifektiv barεri pכrfomans.

Wetin na di difrɛns bitwin PET/AL/PE ɛn PET/VMPET/PE?

PET/AL/PE de yuz tru tru aluminiɔm fɔyl ɛn jɔs de gi strɔng layt, ɔksijɛn ɛn mɔstɔ barɛri. PET/VMPET/PE de yuz wan tin we dɛn kɔl tin mɛtal ɛn i nɔmal fɔ layt ɛn i nɔ de tek bɔku mɔni.

PET/AL/PE fit fɔ retort sterilization?

Standard PET/AL/PE nɔ fɔ yuz ɔtomɛtik fɔ ritɔt. Retort pak nɔmal wan nid fɔ gɛt dediket CPP ɔ RCPP silan ɛn retort-grɛd adeziv.

Yu tink se dɛn kin bɔyl PET/AL/PE fim?

Yuz fɔ bɔyl nid fɔ gɛt spɛshal dizayn strɔkchɔ, adhesive ɛn sialant layt. Standard film nɔ fɔ rayt as boilable if dɛn nɔ tɛst am.

Yu tink se dɛn kin put PET/AL/PE fim na maykrowev?

Dɛn nɔ fɔ put laminat we gɛt aluminiɔm fɔyl na maykrowev pas nɔmɔ dɛn dɔn gri fɔ yuz di kɔmplit pak sistɛm ɛn di instrɔkshɔn dɛn we di kɔstɔma dɛn gi fɔ da yus de.

Yu tink se dɛn kin print PET/AL/PE fim bay kɔstɔm?

Yɛs. Logo, prodak infɔmeshɔn, barɔd, instrɔkshɔn ɛn dɛkɔretiv grafik dɛn kin rivas print pan di PET layt.

Yu tink se pat pan di aluminiɔm we i tan lɛk fɔ kɔntinyu fɔ de?

Yɛs. At wok kin yuz wayt eria dɛn we dɛn print, eria dɛn we gɛt kɔlɔ ɛn eria dɛn we dɛn nɔ print wit mɛtal-ɛfɛkt akɔdin to di dizayn we dɛn dɔn gri fɔ.

Us wayd dɛn de?

Di rεnj we dεn pablish na lεk 160mm to 2600mm, bכt di fainal avεlayblεshכn dipכnt pan di laminat strכkchכ, printin, fכyl tiknes εn kכnvכlt ikwipment.

Us tik tik dɛn de?

di publish totכl tiknes rεnj na aprכksimatli 0.045mm to 0.35mm. Dɛn fɔ pik ɛni layt akɔdin to di prɔdak ɛn di paket we dɛn nid.

Yu tink se dɛn kin kɔstɔmayt di kɔr ɛn di wayn dairekshɔn?

Yɛs. Kor dayamita, rol dayamita, rol wet, print-sayd oriɛnteshɔn ɛn wayndin dairekshɔn kin mach to di pak mashin.

PET/AL/PE film fud sef?

Fɔd-kɔntakt suitability dipen pan di kɔmplit PET, fɔyl, adeziv, ink ɛn PE strɔkchɔ ɛn di it we dɛn want fɔ it, tɛmpracha, di tɛm we dɛn fɔ tek ɛn di makɛt we dɛn want fɔ go.

Yu tink se SGS sɛtifiket de pruv se ɛvri PET/AL/PE fim na fud gred?

Nɔ, SGS ripɔt rili impɔtant nɔmɔ we i kɔba di ɛksaktɔ laminat, di rigyuleshɔn we dɛn kin yuz ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz.

Yu tink se PET/AL/PE fim kin risaykul?

Na wan multi-material laminate we at fɔ separet insay kɔvɛnshɔnal risaykul sistɛm. Aktual rikavari dipen pan spɛshal lokal infrastukchɔ.

Yu tink se ɔda tin dɛn de we dɛn kin yuz fɔ mek tin dɛn bak?

Mono-PE, mono-PP, transparent koted barεri εn mεtalized-film strכkchכ dεm kin evaluate we tεknikal suitable.

Yu tink se dɛn kin yuz PET/AL/PE fɔ mek famasitik sachet?

Yes, yuz wan famasi-grɛd strɔkchɔ ɛn di rayt barɛri, maykreshɔn, klin, stebiliti ɛn rigyuletɔri validɛshɔn.

Yu tink se sampul ɔ trial rol dɛn de?

Sampl ɔ trial rol dɛn we dɔn de kin de fɔ chɛk di strɔkchɔ, print, sial, trak rol ɛn pak-mashin kɔmpitibliti.

Us infɔmeshɔn dɛn nid fɔ kot?

Gi di prodak we dɛn pak, shelf layf, film strɔkchɔ, layt tiknɛs, wit, printin, bag fɔmat, mashin ditil, kɔr, wayndin, kwantiti ɛn ples fɔ go.

Get wan PET/AL/PE Film Kot

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae PET/AL/PE lamination film, metal lamination film, kala-printed kompoziyt film, lidding film, fud trey en customized fleksibul pak matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt fud manifakta, kɔfi brand, pet-fud prodyusɔ, famasitik kɔmni, fleksibul pak kɔnvɔta, impɔtɔ ɛn distribyushɔn wit strɔkchɔ divɛlɔpmɛnt, printin, sɛmpul, kwaliti inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ Kot ɛn Sampul