Fim ɗin Lamination na Pet/AL/PE

Mai ƙera Fim ɗin Lamination Mai Babban Shafi na PET/AL/PE

HSQY tana ƙera fina-finan lamination masu ƙarfi na PET/AL/PE don kofi, shayi, kayan ciye-ciye, busassun abinci, foda, kayan ƙanshi, kayayyakin abinci masu gina jiki, abincin dabbobi, sachets na magunguna da kuma marufi na masana'antu masu saurin kamuwa da danshi.

PET/AL/PE wani tsari ne mai sassauƙa na marufi mai faɗi da yawa wanda ya ƙunshi fim ɗin polyethylene terephthalate na waje, shingen foil na aluminum na tsakiya da kuma Layer ɗin rufe zafi na polyethylene na ciki.

Layin PET yana ba da ƙarfin injina, kwanciyar hankali da kuma saman da za a iya bugawa. Foil ɗin aluminum yana ba da babban shinge ga iskar oxygen, tururin ruwa da haske. Layin PE yana ba da sassauci, kariyar hulɗa da samfura da aikin rufe zafi.

Laminate ɗin ba shi da wani haske domin yana ɗauke da ainihin foil ɗin aluminum. Kayan da ba a buga ba yawanci suna da kamannin ƙarfe na azurfa, yayin da marufi da aka gama za a iya bugawa da launuka na musamman, zane-zane, bayanan samfura da kuma alamar kasuwanci.

HSQY ta buga jimillar kauri tsakanin 0.045mm zuwa 0.35mm da faɗin daga kimanin 160mm zuwa 2600mm. Ainihin yuwuwar samarwa ya dogara ne da kauri na kowane Layer, ma'aunin foil na aluminum, faɗin bugawa, tsarin lamination, ikon yankewa, diamita na birgima da buƙatun injin marufi.

Ana iya samar da fim ɗin PET/AL/PE a matsayin naɗaɗɗen birgima ko wanda ba a buga ba kuma a mayar da shi zuwa sachets, lebur mai faɗi, jakunkunan hatimi na tsakiya, jakunkunan gusseted, jakunkunan tsayawa da sauran nau'ikan marufi masu sassauƙa na musamman.

Bai kamata a yi amfani da daidaitaccen PET/AL/PE ta atomatik don tsaftace retort, tafasa ko wasu hanyoyin sarrafa zafi mai zafi ba. Aikace-aikacen retort yana buƙatar tsari mai zafi mai zafi, mannewa da tsarin mannewa na musamman.

Bincika ƙarin fina-finan lamination na ƙarfe da kuma Fina-finan haɗakarwa da aka buga musamman don aikace-aikacen marufi masu sassauƙa.

Nemi Farashin Fim ɗin PET/AL/PE    Nemi Samfuran Fim

Hotunan Fim ɗin Lamination na PET/AL/PE

Menene Fim ɗin Lamination na PET/AL/PE?

Fim ɗin lamination na PET/AL/PE kayan marufi ne mai sassauƙa wanda aka samar ta hanyar haɗa fim ɗin polyester, foil ɗin aluminum da fim ɗin polyethylene ko shafi cikin tsari mai faɗi ɗaya.

Ana zaɓar tsarin ne lokacin da samfurin ke buƙatar kariya mai ƙarfi daga iskar oxygen, danshi da haske fiye da yadda laminate na filastik mai haske na yau da kullun zai iya bayarwa.

Yawanci ana haɗa fina-finan ta amfani da busasshen lamination, lamination mara narkewa, extrusion-lamination ko wani tsari da aka amince da shi na canza su bisa ga tsarin da ake buƙata da aikin da ake buƙata.

Aikin kunshin ƙarshe ya dogara da fim ɗin mutum ɗaya, kauri na foil ɗin aluminum, manne, yanayin warkarwa, tsarin manne na PE, tsarin bugawa, siffar fakitin da ingancin hatimi.

Tsarin Fim ɗin Lamination na Pet/AL/PE

Layer na waje na dabbar gida

Fim ɗin PET na waje yana ba da ƙarfin tauri, kwanciyar hankali na girma, juriya ga abrasion da kuma santsi mai kyau don bugawa mai inganci.

Bugawa ta baya tana sanya tawada tsakanin fim ɗin PET da kuma layi na gaba, wanda ke taimakawa wajen kare zane-zanen da aka buga daga gogewa kai tsaye yayin juyawa, jigilar kaya da kuma sarrafa masu amfani.

Layer Shafi na Aluminum

Aluminum foil ɗin yana ba da babban shinge ga iskar oxygen, tururin ruwa, hasken ultraviolet da haske da ake iya gani.

Ya kamata a zaɓi kauri na foil bisa ga shingen da ake buƙata, sassaucin fakiti, juriyar naɗewa, haɗarin hudawa da farashi.

Yanayin ramin fin, ƙarar, fashewar lanƙwasa da lalacewar kunshin na iya rage ingantaccen shingen laminate da aka gama kuma ya kamata a tantance shi yayin gwaji.

Layer ɗin Hana Zafi na Ciki na PE

Layin ciki na PE yana ba da sassauci kuma yana ba da damar laminate don samar da hatimin zafi yayin yin jaka, cikawa ko rufe fakitin ƙarshe.

Ya kamata a zaɓi tsarin rufewa bisa ga samfurin, zafin cikawa, gurɓatar mai ko foda, zafin rufewa, matsin lamba, lokacin zama, saurin layi da ƙarfin hatimin da ake buƙata.

Manna Laminating

Manne yana haɗa PET, foil ɗin aluminum da PE tare kuma yana shafar ƙarfin lamination, juriya ga sinadarai, tsufa, wari da aikin zafin jiki kai tsaye.

Tsarin mannewa da yanayin matsewa dole ne su dace da abinci, tsarin cikawa, lokacin ajiya da yanayin zafin da aka yi niyya.

Bayanin Fim ɗin Lamination na PET/AL/PE

Mahimman Sifofi na PET Aluminum Foil PE Film

• Kariyar shinge mai ƙarfi: Aluminum foil yana ba da kariya mai ƙarfi daga iskar oxygen, tururin ruwa da haske.

• Rike ƙamshi: Tsarin yana taimakawa rage asarar ƙamshi mai canzawa daga kofi, shayi, kayan ƙanshi da kayan ƙanshi.

• Katangar haske mai haske: Tsarin foil ɗin yana kare samfuran da ke da sauƙin haske kuma yana haifar da kamannin ƙarfe.

• Za a iya bugawa a waje: PET tana goyan bayan zane-zane masu cikakken bayani, alamar kasuwanci, barcode da bayanan samfur.

• Aikin rufe zafi: Tsarin PE yana tallafawa yin jaka da rufe fakitin ƙarshe.

• Ƙarfafa injina: PET yana taimakawa kare foil ɗin aluminum daga shimfiɗawa da sarrafa damuwa na yau da kullun.

• Tsarin ciki da juriya ga danshi: Ana iya zaɓar tsarin don busassun kayayyaki, masu mai ko ƙamshi.

• Canza fim ɗin ta musamman: Ana iya yanke shi, a buga shi sannan a mayar da shi zuwa tsarin marufi da yawa.

PET/AL/PE idan aka kwatanta da sauran Tsarin Shingayen Masu Tsauri

Aikin Shamaki da Ingancin Aluminum Foil

Aluminum foil shine babban layin shinge, amma ba za a iya tantance aikin shingen da aka gama ba daga sunan kayan kawai.

Ainihin iskar oxygen da watsa tururin ruwa sun dogara ne akan kauri na foil, ramukan filaye, ingancin lamination, naɗewa, fashewar lanƙwasa, hatimin jaka, bawuloli, zips da duk wata lalacewa ta injiniya.

Ya kamata a auna ƙimar OTR da WVTR ta amfani da laminate da aka amince da shi na ƙarshe da yanayin zafin jiki da danshi da aka amince da su.

Aikin Hana Zafi

Aikin rufe zafi ya dogara da tsarin rufewar PE, zafin rufewa, matsin lamba, lokacin zama, ƙirar muƙamuƙi da saurin layin marufi.

Foda, mai, ƙwayoyin kayan ƙanshi ko ragowar samfurin a yankin hatimin na iya rage ƙarfin hatimin da kuma ƙara haɗarin ɓuya.

• Ƙayyade zafin farawa da hatimin zafi.

• Bayyana tagar hatimin aiki da aka tabbatar.

• Auna ƙarfin hatimi a yanayin zafi na ɗaki da wurin ajiya.

• Kimanta ƙarfin ɗaukar zafi akan layukan marufi masu saurin gudu.

• Gwada rufewa ta hanyar gurɓatar da ake tsammani daga foda, mai ko danshi.

• Duba ɗigon ruwa, wrinkles, ƙonewa da kuma rufe murdiya ta hanyar tashar.

• Yi gwajin fashewa, injin tsabtace iska, shigar da fenti ko wani gwajin aminci da aka amince da shi.

Shin Fim ɗin PET/AL/PE Ya Dace Da Marufi Na Retort?

Bai kamata a yi amfani da fim ɗin PET/AL/PE na yau da kullun ta atomatik don tsaftace fata, tafasa mai zafi ko girki mai matsin lamba ba.

Marufi na Retort yawanci yana buƙatar marufi na ciki mai jure zafi kamar CPP ko RCPP, manne mai matakin retort da kuma tsarin waje wanda zai iya kiyaye ƙarfin haɗin gwiwa da kuma ingancin kunshin yayin zafi, matsin lamba da kuma fallasa danshi.

Tsarin gyaran fuska mai yiwuwa sun haɗa da PET/AL/RCPP, PET/NY/AL/RCPP da sauran laminates na musamman ga aikin.

Dole ne a tabbatar da fakitin ƙarshe ta amfani da ainihin abincin, acidity, abun da ke cikin mai, zafin tsaftacewa, lokacin tsaftacewa, matsin lamba, tsarin sanyaya da kuma burin adanawa.

Fim ɗin PET/AL/PE don Marufin Kofi

Ana yawan zaɓar PET/AL/PE don kofi mai wake, kofi da aka niƙa da kuma kofi nan take saboda layin foil yana ba da kariya daga iskar oxygen, danshi da haske.

Kofi da aka gasa sabo yana fitar da iskar carbon dioxide bayan an gasa. Saboda haka, marufin kofi na wake gaba ɗaya na iya buƙatar bawul ɗin cire iskar gas ta hanya ɗaya wanda ke ba da damar iskar gas ta fita daga jakar yayin da yake rage shigar iskar oxygen daga waje.

• Tsarin kofi mai cikakken wake, ko na niƙa ko nan take.

• Kwanon gasasshen kofi da bayanin martaba na degassing.

• Tsawon lokacin shiryayye da zafin ajiya da ake buƙata.

• Bukatar bawul ɗin cire gas ta hanya ɗaya.

• Zip, ƙulli na tin ko wani abu da ake buƙata don rufewa.

• Tsarin jaka da nauyin da ya dace.

• Rike ƙamshi da kuma isashshen iskar oxygen.

• Gwajin faɗuwa, fashewa da jigilar kaya.

Aikace-aikacen Fim ɗin Lamination na PET/AL/PE

• Marufin kofi: Wake cikakke, kofi da aka niƙa, kofi nan take da kayayyakin da ake bayarwa sau ɗaya.

• Marufin shayi: shayin ganye mai laushi, garin shayi, shayin ganye da kuma sachets.

• Marufi na abun ciye-ciye: Goro, busassun 'ya'yan itace, biredi, dankali, kukis da abincin soyayye.

• Marufin foda: Foda madara, foda mai furotin, foda mai gina jiki, gaurayen abubuwan sha da foda kayan ƙanshi.

• Kayan ƙanshi da sinadaran: Ganye, kayan ƙanshi, yisti, ƙarin abubuwa da sinadaran da ke da tasiri ga danshi.

• Marufin abincin dabbobi: Busasshen abincin dabbobi, kayan abincin dabbobi, kari da kuma abincin dabbobi da aka yi da foda.

• Marufi na magunguna: Allunan magani, capsules, foda da granules ta amfani da tsarin magunguna da aka amince da shi.

• Marufi na likita: Kayayyakin da ke da laushin danshi, waɗanda aka yi su bisa ga tsafta da kuma tantancewa ta musamman ga amfani.

• Marufi na masana'antu: Abubuwan lantarki, sinadarai, kayan bushewa da kayan da ke da sauƙin shafawa da danshi.

Tsarin Naɗi da Marufi

Ana iya samar da fim ɗin PET/AL/PE a matsayin abin birgima ga masu sauya marufi masu sassauƙa, masana'antun jaka da layukan cikawa ta atomatik.

• Nauyin birgima mai siffar-cika-hatimi a tsaye.

• Na'urar cika-hatimi ta kwance.

• Fim ɗin sachet da kuma fakitin manne.

• Jakunkunan hatimi na gefe uku.

• Jakunkunan hatimi masu gefe huɗu.

• Jakunkunan hatimi na tsakiya da na ƙarshen.

• Jakunkuna masu faɗi.

• Jakunkunan gefe da kuma jakunkunan huluna huɗu.

• Jakunkunan tsayawa.

• Zip, bawul da jakunkunan kayan haɗi na musamman.

Bukatun Bugawa da Zane-zane na Musamman

Ana iya amfani da bugu na musamman a kan layin PET don yin alama, bayanai na ƙa'idoji, barcodes, umarnin shiri da zane-zanen ado.

Bukatun Hulɗa da Abinci da Dokokin da Aka Doka

Dacewar hulɗa da abinci ya dogara ne akan laminate da aka amince da shi na ƙarshe maimakon sunayen kayan PET, foil ɗin aluminum ko PE kawai.

Kimantawa ya kamata ta haɗa da fim ɗin PET, manne mai rufe fuska na PE, maganin foil na aluminum, manne mai laminating, tawada ta bugawa, launi, farar fata, ƙarin kayan aiki da tsarin ƙera su.

Masu siye ya kamata su gano nau'in abincin, hulɗa kai tsaye ko a kaikaice, zafin cikawa, zafin ajiya, tsawon lokacin hulɗa, tsarin dumama da aka yi niyya da kuma kasuwar da za a je.

Takardun da suka dace na iya haɗawa da sanarwar bin ƙa'ida, bayanin tsari, rahoton gwajin ƙaura, rahoton ragowar mai da kuma bayanan ƙa'idoji masu goyan baya.

Ya kamata a bayyana SGS bisa ga ainihin gwajin da aka yi. Takardar shaidar SGS ko ISO ta gabaɗaya ba ta tabbatar da hulɗar abinci, amsawa, shinge ko aikin da aka yi a lokacin da aka ƙayyade ba.

Marufi da Masana'antu da Magunguna

Marufi na magunguna, na likitanci da na masana'antu na iya buƙatar kulawa mai tsauri fiye da marufi na abinci da busassun kayayyaki na yau da kullun.

• Bin diddigin tsari da kuma sarrafa canji.

• Tsafta da kuma kula da gurɓatawa.

• Abubuwan da za a iya cirewa da kuma kimanta ƙaura.

• Iyakokin ragowar abubuwan narkewa.

• Tabbatar da iskar oxygen da danshi.

• Gwajin hudawa, fasawa mai lankwasawa da kuma ingancin rufewa.

• Nazarin kwanciyar hankali cikin sauri da kuma a ainihin lokaci.

• Takardun ƙa'idoji na musamman kan samfura.

Tsarin Sake Amfani da shi da Madadinsa

PET/AL/PE wani nau'in laminate ne mai kayan aiki da yawa wanda ya ƙunshi polyester, aluminum, polyethylene da manne.

Waɗannan layukan suna da wahalar rabawa a tsarin sake amfani da injina na gargajiya, don haka bai kamata a bayyana fakitin ta atomatik a matsayin wanda za a iya sake amfani da shi ba.

Zaɓuɓɓukan gyara na ainihi sun dogara ne akan tarin kayan gida, rarrabawa, hanyoyin sake amfani da su na musamman, tawada, manne, kayan haɗi da kuma cikakken ƙirar fakitin.

Za a iya kimanta wasu tsare-tsare kamar mono-PE, mono-PP, fim ɗin shinge mai haske ko fim ɗin ƙarfe lokacin da sake amfani da shi, ƙarancin nauyi ko ganin samfura shine fifikon aikin.

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• Tsarin kayan aiki da kuma tantance Layer.

• Jimlar kauri da kauri na kowane yanki.

• Ma'aunin foil na aluminum da kuma duba ramin pinhole.

• Faɗin birgima, tsayi, diamita, nauyi da girman tsakiya.

• Alkiblar juyawa, tashin hankali na birgima, na'urar hangen nesa da kuma daidaita gefen.

• Ƙarfin tauri, tsayin daka da juriyar huda.

• Juriyar lanƙwasa-crack.

• Ƙarfin haɗin lamination.

• Gwajin warkarwa da kuma gwajin sinadaran da suka rage.

• Buga launi, rajista da kuma maimaita tsawon.

• Mannewa da tawada, juriyar gogewa da toshewa.

• OTR da WVTR a ƙarƙashin takamaiman yanayi.

• Gwajin watsa haske ko rashin haske inda ake buƙata.

• Zafin farawar zafi-hatimi.

• Ƙarfin hatimi da aikin zafi-tack.

• Gwajin gurɓatawa ta hanyar rufewa.

• Gwajin fashewa, faɗuwa, matsi da kuma zubewa.

• Gwajin ingancin bawul, zik da kayan haɗi.

• Gwajin ƙaura inda ya dace.

• Tabbatar da adanawa da kuma tsawon lokacin shiryayye.

• Duba kaya, fakiti da kuma duba kwantena.

Bayanin da ake buƙata don ƙimar fim ɗin PET/AL/PE

• Samfurin da aka shirya da kuma nauyin da aka yi amfani da shi.

• Amfani da abinci, magunguna ko masana'antu.

• Tsawon lokacin shiryawa da yanayin ajiya da ake buƙata.

• Zafin ciko da zafin rufewa.

• Duk wani tsari na tafasa, pasteurization ko retort.

• Ana buƙatar OTR, WVTR da kuma abin da ke hana haske.

• Kauri na PET, foil da PE Layer da aka fi so.

• Jimlar kauri da haƙuri da ake buƙata.

• Juriyar faɗin fim da faɗinsa.

• Tsarin marufi da girman jakar da aka gama.

• Marufi-mai ƙera injin da samfurinsa.

• Saurin injina da tsarin rufewa da muƙamuƙi.

• Diamita na tsakiya da matsakaicin diamita na birgima.

• Matsakaicin nauyin birgima.

• Buga zane-zane da adadin launuka.

• Maimaita tsawon, alamar ido da kuma alkiblar juyawa.

• Bukatar bawul, zik, ko bututun da ke yagewa.

• Kasuwar da za a je da kuma takardun bin ƙa'idodi da ake buƙata.

• Adadin oda na farko da hasashen shekara-shekara.

• Shiryawa, tashar jiragen ruwa da aka nufa da kuma ranar isarwa da aka nema.

Aika Bukatun Fim ɗin Lamination ɗinku

Takaddun shaida da Takardun Inganci

Takardun da ake da su na iya haɗawa da takaddun bayanai na fasaha, takaddun bayanai na aminci, sanarwar hulɗa da abinci, rahotannin ƙaura, rahotannin abubuwan da aka takaita, rahotannin abubuwan da suka rage da kuma takaddun kula da inganci.

Kowace takarda ya kamata ta dace da tsarin PET/AL/PE na ƙarshe, tsarin bugawa, manne, manne mai rufe PE, wurin masana'anta da kuma yanayin amfani da aka tsara.

Bai kamata a ɗauki takardar shaidar kamfani a matsayin shaidar takamaiman OTR, WVTR, ƙimar amsawa, yanayin hulɗa da abinci ko tsawon lokacin da aka ajiye a cikin fakitin ba.

Nunin Duniya na HSQY

HSQY tana gabatar da fina-finan marufi masu sassauƙa, fina-finan rufewa, tiren abinci, zanen filastik da kuma hanyoyin marufi na musamman a baje kolin ƙasa da ƙasa.

Samarwa da Shiryawa

Shiryawa da Isarwa

Samfurin tattarawa: Ana iya sanya ƙananan biredi da samfuran fim a cikin jakunkuna masu kariya, kwali ko akwatuna masu tauri.

Marufi mai yawa: Ana iya naɗe biredi da fim ɗin kariya na PE, takarda kraft, kayan da ba sa jure da danshi ko wata hanyar marufi da aka amince da ita.

Kariyar Core da Roll: Ana iya kare Cores na takarda, end na birgima da gefunan fim bisa ga nauyin birgima da buƙatun jigilar kaya.

Marufin fale-falen: Ana iya sanya kimanin kilogiram 500-2000 a kan plywood ko pallet mara feshi, ya danganta da girman birgima da iyakokin sarrafawa.

Lodawa a cikin kwantena: Adadin nauyin da aka ambata ya kai kimanin tan 20, ya danganta da ƙayyadaddun naɗin da aka yi, ƙirar fale-falen da kuma iyakan nauyin kwantena na doka.

Ajiya: A adana fim ɗin a cikin yanayi mai tsabta da bushewa a cikin gida, nesa da hasken rana kai tsaye, zafi mai yawa, danshi, ƙura da ƙamshi mai ƙarfi.

Sharuɗɗan isarwa: EXW, FOB, CNF, CIF, DDU da sauran ka'idojin Incoterms da aka amince da su za a iya tattauna su.

Lokacin Gabatarwa: Tsarin samarwa na yau da kullun yana buƙatar kimanin kwanaki 10-14 na aiki bayan an tabbatar da tsari, bugawa, zane-zane, adadi da biyan kuɗi.

Me Yasa Zabi HSQY A Matsayin Mai Kaya Da Fim Din PET/AL/PE?

• Tsarin PET, foil ɗin aluminum da kuma tsarin shinge mai ƙarfi na PE.

• Kauri na musamman na Layer da jimlar kauri na fim.

• Na'urar buga takardu da ba a buga ba.

• Bugawa ta musamman da kuma tasirin ƙira na ƙarfe.

• Faɗin fim ɗin da aka keɓance, core, diamita na birgima da kuma alkiblar juyawa.

• Tsarin kofi, foda na abinci, abincin dabbobi da marufi na masana'antu.

• Samfura da na'urorin gwaji don gwaje-gwajen injina da hatimi.

• Tallafin shinge, haɗin gwiwa, bugu da gwajin hatimi.

• Jaka ta musamman da tsarin marufi mai sassauƙa.

• Shirya kayan fitarwa da tallafin isar da B2B na ƙasashen waje.

Kafin a samar da kayan da yawa, HSQY ya ba da shawarar a gwada laminate ɗin da aka zaɓa ta amfani da ainihin samfurin abokin ciniki, injin marufi, yanayin rufewa, yanayin ajiya da tsarin kunshin da aka gama.

Tuntuɓi HSQY don Samfura da Farashi

Tambayoyin da Ake Yawan Yi Game da Fim ɗin PET/AL/PE

Menene fim ɗin lamination na PET/AL/PE?

Kayan marufi ne mai sassauƙa da yawa wanda ya ƙunshi layin waje na PET, shingen foil na aluminum da kuma layin rufe zafi na PE.

Me kowanne matakin PET/AL/PE yake yi?

PET yana ba da ƙarfi da sauƙin bugawa, foil ɗin aluminum yana ba da babban shingen iskar oxygen, danshi da haske, kuma PE yana ba da sassauci da rufe zafi.

Shin fim ɗin PET/AL/PE yana da haske?

A'a. Ainihin foil ɗin aluminum ba shi da wani haske, don haka laminate ɗin da ba a buga ba yawanci yana da kamannin ƙarfe na azurfa.

Waɗanne samfura za a iya haɗa su a cikin fim ɗin PET/AL/PE?

Amfani da aka saba yi sun haɗa da kofi, shayi, kayan ciye-ciye, goro, busasshen abinci, kayan ƙanshi, foda mai gina jiki, abincin dabbobi, magunguna da kayayyakin masana'antu masu saurin kamuwa da danshi.

Shin PET/AL/PE ya dace da marufin kofi?

Eh. Yana ba da kariya daga haske, iskar oxygen da danshi. Kofin wake da aka gasa sabo kuma yana iya buƙatar bawul ɗin cire gas ta hanya ɗaya.

Shin PET/AL/PE yana samar da cikakken shingen iskar oxygen?

Aluminum foil yana da ƙarfi sosai wajen samar da iskar oxygen, amma ainihin aikin kunshin da aka gama ya dogara ne da ramukan foil, fashewar lanƙwasa, hatimi, bawuloli, zips da lalacewar fakitin.

Menene OTR da WVTR?

OTR yana auna watsa iskar oxygen, yayin da WVTR ke auna watsa ruwa da tururi. Dole ne dukkan dabi'un su gano hanyar gwaji, zafin jiki, danshi da kuma tsarin laminate.

Me yasa laminates na aluminum foil zasu iya rasa aikin shinge?

Lalacewar ramin filo, naɗewa akai-akai, tsagewar lanƙwasa, wargajewa, hudawa da kuma rashin kyawun hatimin fakiti na iya rage ingantaccen aikin shinge.

Menene bambanci tsakanin PET/AL/PE da PET/VMPET/PE?

PET/AL/PE yana amfani da ainihin foil ɗin aluminum kuma gabaɗaya yana ba da kariya mai ƙarfi daga haske, iskar oxygen da danshi. PET/VMPET/PE yana amfani da siraran shafi mai ƙarfe kuma yawanci yana da sauƙi kuma yana da araha.

Shin PET/AL/PE ya dace da tsaftace hakora da hakora?

Bai kamata a yi amfani da daidaitaccen PET/AL/PE ta atomatik don gyara ba. Marufin gyaran gyaran gashi yawanci yana buƙatar manne na musamman na CPP ko RCPP da manne mai matakin gyara gashi.

Za a iya tafasa fim ɗin PET/AL/PE?

Amfani da tafasa yana buƙatar tsari na musamman, mannewa da kuma rufin rufewa. Bai kamata a kimanta fim ɗin da aka saba a matsayin wanda za a iya tafasa ba tare da an gwada ba.

Za a iya sanya fim ɗin PET/AL/PE a cikin microwave?

Bai kamata a sanya laminate mai ɗauke da foil ɗin aluminum a cikin microwave ba sai dai idan an amince da cikakken tsarin marufi da umarnin mai amfani don amfani da shi.

Za a iya buga fim ɗin PET/AL/PE na musamman?

Eh. Ana iya buga tambari, bayanin samfura, barcodes, umarni da zane-zanen ado a kan layin PET.

Shin wani ɓangare na bayyanar aluminum zai iya ci gaba da bayyana?

Eh. Zane-zane na iya amfani da wurare masu launin fari da aka buga, da kuma wuraren da ba a buga ba waɗanda ke da tasirin ƙarfe bisa ga tsarin da aka amince da shi.

Wadanne fadi ake samu?

Matsakaicin da aka buga yana tsakanin 160mm zuwa 2600mm, amma samuwa ta ƙarshe ya dogara da tsarin laminate, bugawa, kauri na foil da kayan aikin juyawa.

Wadanne kauri ake samu?

Jimillar kauri da aka buga shine kimanin 0.045mm zuwa 0.35mm. Ya kamata a zaɓi kowane Layer bisa ga buƙatun samfur da fakitin.

Za a iya keɓance alkiblar tsakiya da kuma alkiblar juyawa?

Eh. Za a iya daidaita diamita na tsakiya, diamita na birgima, nauyin birgima, yanayin da aka buga a gefe da kuma alkiblar birgima zuwa injin marufi.

Shin abincin fim ɗin PET/AL/PE yana da aminci?

Dacewar hulɗa da abinci ya dogara ne da cikakken tsarin PET, foil, manne, tawada da PE da kuma abincin da aka yi niyya, zafin jiki, tsawon lokaci da kuma kasuwar da za a je.

Shin takardar shaidar SGS ta tabbatar da cewa kowane fim ɗin PET/AL/PE yana da darajar abinci?

A'a. Rahoton SGS ya dace ne kawai idan ya shafi ainihin laminate, ƙa'idodi masu dacewa da kuma sharuɗɗan amfani da aka tsara.

Shin za a iya sake yin amfani da fim ɗin PET/AL/PE?

Laminate ne mai kayan aiki da yawa wanda yake da wahalar rabawa a tsarin sake amfani da shi na gargajiya. Ainihin farfadowa ya dogara ne akan kayan aikin gida na musamman.

Akwai madadin da za a iya sake amfani da su?

Ana iya kimanta tsarin Mono-PE, mono-PP, shinge mai rufi mai haske da tsarin fim mai ƙarfe idan ya dace da fasaha.

Za a iya amfani da PET/AL/PE don sachets na magunguna?

Eh, ta amfani da tsarin magunguna da shinge mai dacewa, ƙaura, tsafta, kwanciyar hankali da tabbatar da dokoki.

Ana samun samfura ko jerin gwaji?

Ana iya samun samfuran da ke akwai ko na'urorin gwaji don duba tsari, bugawa, hatimi, bin diddigin na'urori da kuma dacewa da marufi-inji.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Samar da samfurin da aka shirya, tsawon lokacin shiryawa, tsarin fim, kauri na yadudduka, faɗi, bugu, tsarin jaka, cikakkun bayanai na injin, core, naɗewa, adadi da inda za a je.

Sami Farashin Fim ɗin PET/AL/PE

Game da Ƙungiyar Roba ta HSQY

Kamfanin HSQY Plastic Group yana samar da fim ɗin lamination na PET/AL/PE, fina-finan lamination na ƙarfe, fina-finan haɗaka da aka buga da launi, fina-finan rufewa, tiren abinci da kayan marufi masu sassauƙa na musamman ga abokan cinikin B2B na ƙasashen duniya.

HSQY tana tallafawa masana'antun abinci, samfuran kofi, masu samar da abincin dabbobi, kamfanonin magunguna, masu sauya marufi masu sassauƙa, masu shigo da kaya da masu rarrabawa tare da haɓaka tsari, bugawa, samfura, duba inganci da kuma shirya kayan fitarwa.

Nemi Ƙimar da Samfura