Capsule leh Tablet atana hman tur damdawi PVC Blister Film

Capsule leh Tablet atana hman tur damdawi PVC Blister Film

HSQY damdawi PVC rigid film hi capsule, tablet leh solid-dose blister packaging dangte tan thermoformable forming material a ni. Film hi pharmaceutical blister packaging line inmil tur roll-a supply a ni a, a thickness, slit width, color, roll dimension leh processing mamawh angin customized theih a ni.

Tuna kan product range hian 0.1mm atanga 1.5mm vel thickness, transparent emaw colored material leh 76mm reference inner core a huam a ni. Plain rigid PVC hi standard blister application tam takah a tha a, damdawi-ah chuan moisture emaw oxygen laka invenna nasa zawk mamawh tan chuan PVC/PVDC emaw, qualified higher-barrier structure dang emaw a ngai thei thung.

Pharmaceutical packaging project atan chuan forming film chu capsule emaw tablet characteristics, blister cavity design, lidding material, sealing conditions, barrier level mamawh, packaging equipment leh applicable qualification requirements te nen thlan tur a ni.

Damdawi siamna PVC Film chungchang sawifiahna

Damdawi siamna PVC Rigid Film Product Images

Damdawi Packaging-a PVC Blister Film hman dan

Thermoformed blister packaging-ah hian damdawi rigid PVC hi forming web atan hman a ni. A siam chhuah lai hian roll chu unwound a ni a, vacuum, pressure emaw, a inmil thermoforming method dang hmangin cavities siam hmain a lum a ni.

Chumi hnuah chuan capsule emaw tablet emaw chu cavities siamah chuan dah a ni. Blister pack-te chu validated packaging process angin code, perforated emaw cut emaw a nih hmain forming web-ah hian a inmil pharmaceutical lidding material dah a ni a, seal a ni.

Damdawi siamna PVC Blister Film-a thil pawimawh tak takte

• Thermoforming Performance: Damdawi lam PVC grade tha tak tak chu capsule leh tablet atan blister cavities awm reng angin siam theih a ni.

• Dimensional Stability: Rigid PVC hian blister web siam tawh leh blister card siam zawh tawhte tan structural support a pe a.

• Product Visibility: Transparent PVC hmang hian packaged dosage form chu mit hmuh theihin a enfiah theih a ni.

• Color Options: Colored material hi hriat theihna emaw, package-design mamawh bik emaw atan sawiho theih a ni.

• Roll Processing: Continuous blister packaging hmanrua nena inmil tur material supply theih a ni.

• Custom Slitting: Roll width hi web width mamawh leh production specification angin configure theih a ni.

• Multiple Barrier Options: Plain PVC emaw higher-barrier PVC-based structure te chu a packaged medicine sensitivity a zirin endik theih a ni.

Barrier performance chu product stability data atanga thlan tur a ni. Plain rigid PVC hi standard protection tling tawk hmunah hman a ni tlangpui a, moisture-sensitive emaw oxygen-sensitive emaw damdawi siamna atana hman tur chuan higher-barrier material a mamawh thei thung.

PVC Blister Film Barrier duhthlan tur a awm

Highest-barrier structure thlan hi a ngai ngai lo. Package thlan tur hian dosage-form stability, shelf life mamawh, climate, cavity dimension, packaging line performance, material cost leh qualification mamawh te ngaihtuah tur a ni.

Damdawi siamna PVC Film hman dan

Capsule Blister hmanga thil siam chhuah

Pharmaceutical rigid PVC hi hard-capsule leh capsule blister pack qualified dangte tan pawh endik theih a ni. Film specification tihfel hunah capsule dimension, cavity depth, forming temperature leh barrier performance mamawh te ngaihtuah tur a ni.

Tablet Blister hmanga thil siam chhuah a ni

Rigid PVC hi tablet blister packaging atan thermoforming web atan hman a ni tlangpui a, chutah chuan product visibility, dimensional stability leh efficient forming performance a ngai a ni.

Nutraceutical leh Healthcare lama natna hrik (Blisters) te

Grade thlan bikte chu vitamin, supplement leh solid-dose healthcare product dangte tan pawh product inmilna, barrier mamawh leh packaging standard hman tur te finfiah hnuah endik theih a ni bawk.

Damdawi siamna atana Higher-Barrier Packaging siam a ni

Moisture emaw oxygen laka invenna tihpun ngai formulation tan chuan standard mono PVC ai chuan PVC/PVDC emaw, qualified higher-barrier structure dang emaw evaluate theih a ni.

Damdawi Packaging hman dan thlalak

Standard vs Deep-Cavity Blister neih dan tur a ni

Standard tablets, blister cavities thuk lo tak tak nei te hian a tlangpuiin PVC film ah forming demand hrang hrang an dah a, capsule lian tak tak, large-format tablets emaw deep cavities te aiin. Chuvangin film thickness, formulation leh forming window te chu blister geometry tak tak leh packaging line angin thlan tur a ni.

Cavities thuk zawk emaw, complex zawk emaw tan chuan customer te chuan cavity dimension leh machine information an pe tur a ni a, chutiang chuan forming performance chu commercial production hmain evaluate theih a ni.

Pharmaceutical PVC Film Quote siamna atana hriat tur pawimawh

Quotation dik zawk leh material evaluation neih duh chuan a hnuaia thute hi a tam thei ang ber pe rawh:

• Material structure mamawh: PVC pangngai, PVC/PVDC emaw structure dang emaw

• Nominal thickness leh tolerance a ni

• Slit zau zawng mamawh

• Core diameter a ni

• Roll diameter sang ber a ni

• Roll weight emaw roll sei zawng emaw mamawh

• Winding direction tih a nih chuan

• Transparent emaw, rawng hrang hranga siam emaw

• Capsule emaw tablet emaw a lian zawng

• Blister cavity dimension leh a siam thuk zawng

• Blister packaging machine model hmanga siam a ni

• Blister nena hman tur lidding material

• Moisture emaw oxygen barrier level emaw mamawh a ni

• Damdawi packaging document mamawh

• Initial order quantity leh kum khata hman tur ruahman

• Destination ram emaw market emaw a ni

Packaging project thar tan chuan commercial approval hmain trial material chu intended blister packaging line-ah evaluate hmasa tur a ni. Check pawimawh tak takte chu film feeding, heating, cavity definition, forming uniformity, sealing condition, finished blister integrity leh product stability te a ni.

Damdawi Quality leh Documentation te

Damdawi blister packaging atan hian product-specific qualification a ngai a ni. Quality-management certificate chauh hi PVC formulation zawng zawng hi damdawi siam zawng zawng emaw, destination market emaw atan a tha vek tih finfiahna atan ngaih tur a ni lo.

Buyers te chuan technical evaluation neih chhungin pharmaceutical packaging standard leh documentation package mamawh an tarlang tur a ni. Specification awmsa, batch information, test report leh supporting document te chu material grade dik tak pek nen a inmil tur a ni.

PVC Film Packing chungchang chipchiar takin

• Sample Packing: A4-size rigid PVC sample sheet te hi venhimna bag leh carton-ah dah theih a ni.

• Sheet Packing: Packing khatah 30kg vel emaw, packing requirement inremna angin emaw.

• Pallet Packing: Plywood pallet khatah 500–2000kg vel chu product configuration a zirin a ni.

• Container Loading: Standard loading condition hnuaiah ton 20 vel a ni a, final dimension leh packing configuration a zirin a ni.

• Typical Lead Time: Ni 10–14 vel, specification leh order volume a zirin.

• Delivery Terms: EXW, FOB, CNF leh DDU te a ni.

Certificate leh Quality Document te a awm bawk

Certificate leh quality document awmsa te chu material grade dik tak, siamna hmun leh damdawi packaging mamawh nen a inmil tur a ni. Project evaluation neih chhung hian i documentation list mamawh chu pe la.

Khawvel pum huapa Exhibition hrang hrang

HSQY Plastic Group hian international exhibition-ah te hian damdawi packaging siamtu, plastic converter, distributor leh professional buyer dangte hmu turin an tel thin.

Damdawi PVC Blister Film chungchanga zawhna tam tak

Damdawi siamna PVC blister film chu eng nge ni?

Pharmaceutical PVC blister film hi rigid thermoformable material a ni a, capsule, tablet leh qualified solid-dose blister packaging dangte siamna atana forming web atan hman a ni.

Capsule blister packaging atan rigid PVC film hman theih a ni em?

Awle. Damdawi atana hman tur PVC film tha tak chu capsule atan cavities-ah thermoformed theih a ni. Film thickness, formulation leh forming condition te chu capsule size, cavity depth leh packaging equipment te nen a inmil tur a ni.

Eng thickness nge awm?

Tuna kan product range hi 0.1mm atanga 1.5mm vel a ni. A tawp ber thickness chu blister design, forming depth leh validated packaging specification angin confirm tur a ni.

PVC leh PVC/PVDC blister film hi eng nge an danglamna?

Plain PVC hian standard thermoforming leh barrier performance bulpui a pe a ni. PVC/PVDC hian PVDC barrier layer a dah belh a, hei hian damdawi siamna atana boruak humhalhna nasa zawk mamawhna atana tui leh oxygen laka invenna a tichak zawk a ni.

Plain PVC hi tablet emaw capsule emaw atan a tha em?

No. Forming film chu product stability leh shelf life mamawh angin thlan tur a ni. Moisture-sensitive sang tak emaw oxygen-sensitive emaw thil siamah hian higher-barrier structure a ngai thei.

PVC film hi deep blister cavities atan customized theih a ni em?

Cavity thuk zawk emaw, complex zawk emaw siamna tur material chu cavity dimension, thickness, forming temperature leh machine condition a zirin evaluate theih a ni. Material evaluation dil hunah i blister drawing emaw cavity dimension emaw pe rawh.

Roll zau zawng hi a duh angin a siam theih em?

Awle. Roll zau zawng hi production capability leh blister-machine mamawh angin a siam theih a ni. Slit zau zawng, core diameter, roll diameter leh roll weight mamawh te pe rawh.

Eng core diameter nge awm?

Tuna product specification-ah hian 76mm inner core diameter a awm tih tarlan a ni. Roll specification dangte chu customer hmanrua angin confirm tur a ni.

Order zat tlem ber chu engzat nge ni?

Tuna listed MOQ hi 1000kg a ni. Customized color, special width, barrier structure emaw non-standard specification dang emaw chuan minimum production quantity hrang hrang a mamawh thei.

Blister machine test nan sample ka dil thei ang em?

Sample material hi a mamawh grade, thickness leh stock awm dan azirin sawiho theih a ni. Commercial approval hmain intended blister line-ah material test hmasak phawt a tha.

Quotation atan eng information nge ka pek ang?

Khawngaihin material structure, thickness, slit width, core diameter, roll dimension, color, capsule emaw tablet size, blister cavity depth, machine model, barrier mamawh, document mamawh, quantity leh destination te pe rawh.

HSQY Plastic Group chungchang

HSQY Plastic Group hian damdawi, damdawi, packaging leh industry lama hman tur rigid PVC film leh a kaihhnawih plastic materials a supply thin a ni. Product awm thei zingah hian plain rigid PVC leh thermoforming leh venhimna mamawh hrang hrang atana PVC-based barrier structure thlan bik te a tel.

Pharmaceutical blister project atan chuan HSQY hian customer-te packaging line angin film thickness, slit width, roll configuration, color, forming mamawh, barrier structure, sample, quality document, packing leh bulk-order mamawh te a sawiho thei a ni.