Uswan Na Bɛtɛ PET Ɔ PVC Matirial?

PET ɛn PVC de ɔlsay, frɔm pak to industrial prodak. Bɔt uswan bɛtɛ fɔ di tin dɛn we yu nid? Fɔ pik di rayt plastic kin ambɔg di pefɔmɛns, kɔst, ɛn sastaynabiliti.

Insai dis post, yu go lan dem ki difrens, pros, en ideal yus.

Wetin na PET Matirial?

PET tinap fɔ polyethylene terephthalate. Na wan strɔng, layt plastic we dɛn kin yuz klos to ɔlsay. Yu go mɔs dɔn si am na wata bɔtul, it tre, ɛn ivin ilɛktronik tin dɛn we dɛn kin pak. Pipul dɛn lɛk am bikɔs i klia, i kin te, ɛn i nɔ kin brok izi wan. I nɔ kin mek bɔku pan di kemikal dɛn bak, so i kin mek di prɔdak dɛn nɔ pwɛl insay.

Wan pan di big bɛnifit dɛn we PET gɛt na dat dɛn kin yuz am bak. Infakt, na wan pan di plastic dɛn we dɛn kin yuz bak na di wɔl. Dat de mek i pɔpul fɔ kɔmni dɛn we bisin bɔt sastaynabiliti. I de wok fayn bak fɔ mek di tɛmmofɔm ɛn sial, we de ɛp fɔ mek di kɔst fɔ prodakshɔn smɔl.

Yu go si PET insay kɔntena dɛn we nɔ de mek it, pak we dɛn kin pak fɔ mɛn pipul dɛn, ɛn rital klamshɛl dɛn. I nɔ kin tɔn wayt we dɛn fold am ɔ bɛn am, we kin mek i pafɛkt fɔ dizayn dɛn we dɛn kin fold. Plɛs, i kin ol ɔp fayn fayn wan ɔnda ɔt we i de fɔm, so nid nɔ de fɔ prɛ-dray di matirial.

Bɔt stil, i nɔ pafɛkt. PET nɔ de gi di sem lɛvɛl fɔ fleksibiliti ɔ kemikal rɛsistɛns lɛk sɔm ɔda plastic dɛn. Ɛn pan ɔl we i nɔ de mek UV layt bɛtɛ pas bɔku pan dɛn, i kin stil brok na do as tɛm de go. Bɔt insay pak, bɔku tɛm PET kin win di PET vs PVC dibɛtɛ bikɔs ɔf aw i izi fɔ risaykul ɛn yuz bak.

Wetin na PVC Matirial?

PVC tinap fɔ polyvinyl klorayd. Na wan had plastic we dɛn dɔn de yuz fɔ bɔku bɔku ia akɔdin to bɔku industri dɛn. Pipul dɛn kin pik am bikɔs i tranga, i nɔ gɛt kemikal, ɛn i nɔ kin tek bɔku mɔni. I nɔ kin izi fɔ riak wit asid ɔ ɔyl, so i kin wok fayn na os ɛn na di industri.

Yu go si PVC insay tin dɛn lɛk shrink film, klia blista pak, sayn sheet, ɛn bildin matirial. I nɔ de ambɔg di wɛda bak, so fɔ yuz am na do na kɔmɔn tin bak. We yu kɔmpia pvc ɔ pet sheet opshɔn dɛn, PVC kin ɔltɛm tinap fɔ in trɛnk ɛn afɔdabiliti.

Dɛn kin prosɛs dis plastic bay we dɛn de yuz ɛkstrushɔn ɔ kalenda we dɛn de yuz. Dat min se dɛn kin tɔn am to smol smol sheet, klia film, ɔ tik tik rigid panɛl. Sɔm vɛshɔn dɛn kin ivin mit di sef standad fɔ pak tin dɛn we nɔto it. Dɛn fayn fɔ fold bɔks ɔ kɔva dɛn we gɛt ay klia.

Bɔt PVC gɛt limit. I at fɔ risaykul ɛn nɔto ɔltɛm dɛn kin alaw am fɔ put am insay it ɔ mɛrɛsin pak. As tɛm de go, i kin yɔlɔ bak ɔnda UV ɛksplɔshɔn pas dɛn yuz aditiv. Bɔt stil, we badjɛt impɔtant ɛn dɛn nid fɔ gɛt ay rigidity, i kin stil bi wan tɔp choice.

PVC vs PET: Ki Difrɛns dɛn pan Matirial Prɔpati dɛn

We wi de tɔk bɔt plastic kɔmpiashɔn pvc pet, di fɔs tin we bɔku pipul dɛn kin tink bɔt na trɛnk. PET na tof bɔt i stil layt. I de handle impak fayn ɛn kip in shep we dɛn fold am ɔ drɔp am. PVC de fil mɔ rigid. I nɔ kin bɛn bɔku ɛn krak ɔnda ay prɛshɔn, bɔt i kin ol ɔp ɔnda lod.

Fɔ tɔk klia wan na ɔda men tin. PET de gi ay transparency ɛn glos. Na dat mek pipul dɛn kin yuz am fɔ pak tin dɛn we nid fɔ mek dɛn apil na di shelf. PVC kin klia bak, mɔ we dɛn pul am, bɔt i kin luk dɔl ɔ yɔlɔ fast if yu put am na di san. I dipen pan aw dɛn mek am.

We wi de tɔk bɔt di san layt, di UV resistance impɔtant bɔku fɔ di tin dɛn we dɛn kin mek na do. PET de du bɛtɛ na ya. I kin stebul mɔ as tɛm de go. PVC nid stebyulayza ɔ i go degrad, get brittle, ɔ chenj kɔlɔ. So if sɔntin de na do, PET kin sef.

Kεmikכl rεsistεns na bכt mכr bεlε. Dɛn ɔl tu nɔ kin gri wit wata ɛn bɔku kemikal dɛn. Bɔt PVC kin ebul fɔ handle asid ɛn ɔyl dɛn bɛtɛ. Na dat mek wi kin si am bɔku tɛm na industrial sheet dɛn. PET de rεsist alkol εn sכm sכlvεnt dεm, bכt nכto kwik kwik wan na di sem lεvεl.

We wi luk pan ɔt rɛsistɛns, PET kin win bak pan bɔku fɔm aplikeshɔn dɛn. Dɛn kin ɔt am ɛn mol am wit smɔl ɛnaji kɔst. Nɔ nid fɔ prɛ-dray insay bɔku kes dɛn. PVC nid tayt kɔntrol we dɛn de prosɛs am. I kin sof kwik bɔt nɔto ɔltɛm i kin ebul fɔ handle ay ɔt fayn fayn wan.

As fɔ surface finish ɛn printability, ɔl tu kin fayn dipen pan di prɔses. PET de wok fayn fɔ UV ɔfset ɛn skrin printin. Di say we i de de kin smol afta i dɔn fɔm. PVC sheet dɛn kin print bak, bɔt yu kin si difrɛns pan glos ɔ ink hold dipen pan di finish—extruded ɔ kalenda.

Na dis na wan kɔmpiashɔn:

Prɔpati	PET	PVC
Impekt Resistans fɔ mek yu nɔ gɛt ɛnitin fɔ du wit am	Ay	Soba
Fɔ du tin klia wan	I rili Klin	Klia to Smɔl Dull
UV Resistans fɔ mek yu nɔ ebul fɔ du am	Bɛtɛ If yu nɔ gɛt ɛnitin fɔ ad	Nid fɔ Additiv dɛn
Kεmikכl Resistεns	Gud	I fayn fɔ yuz Asid Sɛtin dɛn
Risistɛns fɔ Ɔt	I Ay, Mɔ Stebul	Lɔwa, Nɔ Stebul
Di we aw pɔsin kin print	Eksɛlɛnt fɔ Pakɛj	Gud, Dipen pan Finish

Plastik Kɔmpiashɔn: PVC vs PET insay Manufakchurin ɛn Prɔsesin

If yu wok wit pak ɔ sheet prodakshɔn, fɔm we rili impɔtant. Dɛn kin pul ɔl tu di PVC ɛn PET insay rol ɔ shit. Bɔt PET na mɔ efyushɔn fɔ thermoforming. I de wam ivin ɛn kip in shep fayn fayn wan. PVC de wok bak fɔ mek di tɛmpracha, pan ɔl we i nid fɔ tek tɛm kɔntrol di tɛmpracha. Kalɛnda na kɔmɔn tin fɔ PVC bak, we de gi am wan supa smol sɔfays.

Prɔsɛsin tɛmpracha na ɔda impɔtant difrɛns. PET de fɔm fayn fayn wan pan lɔwa ɛnaji kɔst. I nɔ nid fɔ drɛy am bifo tɛm, we de sev tɛm. PVC kin mɛlt ɛn fɔm izi wan bɔt i kin sɛnsitiv to ɔva ɔt. Tumɔs ɔt, ɛn i kin pul bad bad smok ɔ difɔm.

We i kam pan fɔ kɔt ɛn sidɔm, ɔl tu di tin dɛn kin izi fɔ yuz. PET sheet dɛn kɔt klin ɛn sial fayn fayn wan insay klamshɛl pak. Yu kin print bak dairekt pan dɛn yuz UV ɔfset ɔ skrin printin. PVC kin kɔt izi wan bak, bɔt dɛn nid shap tul fɔ tik gred dɛn. I printabiliti dipen mɔ pan sɔfayz finish ɛn fɔmyulashɔn.

Fɔd kɔntakt na big tin fɔ bɔku industri dɛn. PET na tin we bɔku pipul dɛn gri fɔ yuz fɔ it dairekt wan. I naturally sef ɛn klia. PVC nɔ de mit dɛn sem glob ɔl standad dɛn de. Bɔku tɛm dɛn nɔ kin alaw am fɔ put am na it ɔ mɛrɛsin pak pas nɔmɔ dɛn trit am spɛshal wan.

Lɛ wi tɔk bɔt prodakshɔn efyushɔn. PET gɛt di edj pan spid ɛn ɛnaji yus. di we aw i de fכm de rכn fast fast, εn sכm εnεji de lכs as hεt. Dat na tru mɔ na big big opareshɔn usay ɛvri sɛkɔn ɛn wat de kɔnt. PVC nid tayt kɔntrol we i de kol, so di saykl tɛm kin slo.

Na dis na wan sɔma tebul:

Ficha	PET	PVC
Men We dɛn fɔ Fɔm	Ekstrushɔn, Tɛmofɔmin	Ekstrushɔn, Kalɛndarin
Tɛmpratura we dɛn de prosɛs	Lɔwa, Nɔ Pri-Drying Nid	Ay, Nid Mɔ Kɔntrol
Fɔ Kɔt ɛn Sial	I izi ɛn Klin	I izi, I Go Nid Tul dɛn we Shap Pas
Fɔ print	Wɛl dɔn	Gud, I Dipen pan Finish
Fɔd Kɔntakt Sef	Dɛn dɔn gri fɔ am ɔlsay na di wɔl	Limitɛd, Bɔku tɛm dɛn kin stɔp am
Ɛnaji Efisiɛns	Ay	Soba
Saykl Taym	Fasta pas dat	Slower

PVC ɔ PET Shit: Kɔst ɛn Avaylabl

We pipul dɛn kɔmpia pvc ɔ pet sheet opshɔn dɛn, bɔku tɛm di kɔst kin kam fɔs. PVC kin shɔt pas PET. Dat na bikɔs in raw matirial dɛn de mɔ ɛn di prɔses fɔ mek am simpul. Na di ɔda say, PET de dipen mɔ pan di tin dɛn we dɛn mek wit ɔyl, ɛn in makit prays kin shift fast fast bay di we aw di krud ɔyl de apin na di wɔl.

Sapɔt chen sɛf de ple wan rol. PET gɛt strɔng glob ɔl nɛtwɔk, mɔ na di fud-grɛd pak makɛt dɛn. I gɛt bɔku pipul dɛn we want am na Yurop, Eshia, ɛn Nɔt Amɛrika. PVC de ɔlsay bak, pan ɔl we sɔm rijyɔn dɛn nɔ kin yuz am na sɔm industri dɛn bikɔs ɔf risaykul ɔ envayrɔmɛnt kɔnsyans.

Customization na ɔda pɔynt we yu fɔ tink bɔt. Dɛn tu tin ya gɛt difrɛn tik ɛn finish. PET sheet dɛn kin gi ay klia ɛn stiffnɛs insay tin gej dɛn. Dɛn fayn fɔ dizayn dɛn we dɛn kin fold ɔ blista pak. PVC sheet kin mek kristal-klia ɔ mat ɛn wok fayn insay tik fɔmat dɛn bak. I kɔmɔn fɔ si dɛn na sayn ɔ industrial sheet.

We i kam pan kɔlɔ, dɛn ɔl tu de sɔpɔt kɔstɔm shed dɛn. PET sheet dɛn kin klia mɔ, pan ɔl we tint ɔ anti-UV opshɔn dɛn de. PVC na mɔ fleksibul ya. Dɛn kin mek am wit bɔku kɔlɔ ɛn difrɛn stayl dɛn we dɛn kin mek am, lɛk frɔst, glos, ɔ tɛkstɔr. Di finish we yu pik de afɛkt prayz ɛn yusabiliti.

Dis dɔŋ ya na wan kwik we fɔ si:

Ficha	PET Sheets	PVC Sheets
Tipik Kɔst we dɛn kin yuz	I pas am pas dat	Ridyus
Maket Prays Sɛnsitiviti	Modaret to Ay	Mɔ Stebul
Di Globɛl Avaylabl	Strɔng, Ɛspɛshali pan Fɔd	Widespread, Sɔm Limit dɛn
Kastom Tiknɛs Rɛnj	Tin to Midul	Tin to Tik
Di Opshɔn dɛn fɔ di Surface	Glossy, Mat, Frɔst, ɛn ɔda pipul dɛn	Glossy, Mat, Frɔst, ɛn ɔda pipul dɛn
Kɔlɔ Kastɔmayzeshɔn	Limitɛd, Mɔst Klir	Wid Rɛnj we De

Risaykul ɛn Envayrɔmɛnt Impekt

If wi luk pan plastic kɔmpiashɔn pvc pet frɔm wan sastaynabiliti angle, PET klia wan de lid insay risaykul. Na wan pan di plastic dɛn we dɛn kin yuz fɔ risaykul pas ɔl na di wɔl. Kɔntri dɛn ɔlsay na Yurop, Nɔt Amɛrika, ɛn Eshia dɔn bil strɔng PET risaykul nɛtwɔk dɛn. Yu go fɛn kɔlekɛshɔn bin fɔ PET bɔtul dɛn ɔlmost ɔlsay. Dat de mek am izi fɔ biznɛsman dɛn fɔ mit di grɛn target dɛn.

PVC na difrɛn stori. Pan ɔl we i tɛknikal risaykul, i nɔ kin rili aksept am bay siti risaykul program dɛn. Bɔku fasiliti dɛn nɔ kin ebul fɔ prosɛs am sef wan bikɔs ɔf di klorin we de insay. Na dat mek bɔku tɛm PVC prɔdak dɛn kin dɔn na say dɛn we dɛn kin trowe dɔti ɔ dɛn kin bɔn dɛn. Ɛn we dɛn bɔn dɛn, dɛn kin pul bad bad gas dɛn lɛk haydrojɛn klorayd ɔ dayɔksin pas dɛn tek tɛm kɔntrol dɛn.

Fɔ trowe dɔti kin mek prɔblɛm dɛn bak. PVC de pwɛl sloslo ɛn i kin rilis aditiv dɛn as tɛm de go. Difrɛn frɔm dat, PET kin stebul mɔ na say dɛn we dɛn kin trowe dɔti, pan ɔl we i bɛtɛ fɔ risaykul am pas fɔ bɛr am. Dɛn difrɛns ya de mek PET bi di opshɔn we kɔmni dɛn we want fɔ ridyus dɛn envayrɔmɛnt impak.

Sastaynabiliti impɔtant fɔ biznɛs bak. Bɔku brand dɛn de ɔnda prɛshɔn fɔ yuz risaykul pakej. PET in klia risaykul rod de ɛp fɔ mit dɛn gol dɛn de. I de ɛp bak fɔ mek pɔblik imej bɛtɛ ɛn mit di rigyuletɔri dimand dɛn na di glob makɛt dɛn. PVC, na di ɔda say, kin mek pipul dɛn we de yuz di eko-kɔnshɛns, tek tɛm luk mɔ.

Fɔd Sefty ɛn Rigyuletɔri Kɔmplians

We i kam pan dairekt kɔntakt fɔ it, bɔku tɛm na PET na di bet we sef. Bɔku pipul dɛn dɔn gri fɔ am frɔm di fud sefty ɔtoriti dɛn lɛk di FDA na di US ɛn EFSA na Yurop. Yu go si am na wata bɔtul, klamshɛl tre, ɛn kɔntena dɛn we dɛn sial akɔdin to grosa shelf dɛn. I nɔ de lich bad tin dɛn ɛn i de wok fayn ivin ɔnda ɔt-sial kɔndishɔn.

PVC de fes mɔ ristrikshɔn dɛn. Pan ɔl we sɔm PVC we gɛt it-grɛd de, dɛn nɔ kin tek am fɔ yuz it dairekt wan. Bɔku kɔntri dɛn nɔ de ɛnkɔrej ɔ ban am fɔ tɔch it pas nɔmɔ i mit rili patikyula fɔmulashɔn dɛn. Dat na biכs sכm aditiv dεm na PVC, lεk plastizayza כ stεbyulayz, kin muf go insay it כnda כt כ prεshכn.

Insay mɛdikal pak, di lɔ dɛn kin ivin tayt. PET matirial dɛn kin lɛk fɔ yuz wan tɛm pak, tre, ɛn kɔva fɔ protɛkt. Dɛn stebul, transparent, ɛn izi fɔ sterilize. PVC kin yuz insay tub ɔ nɔ-kɔntakt kɔmpɔnɛnt, bɔt jɔs lɛk aw dɛn nɔ kin trɔst am fɔ pak it ɔ mɛrɛsin.

Akɔdin to di glob rijyɔn dɛn, PET mit mɔ sefty sɛtifiket pas PVC. Yu go si am pas FDA, EU, ɛn Chaynish GB standad wit izi. Dat de gi di wan dɛn we de mek tin dɛn mɔ fridɔm we dɛn de ɛkspɔt.

Sɔm ɛgzampul dɛn we de na di rial wɔl na salad dɛn we dɛn dɔn pak bifo tɛm, lid dɛn we dɛn kin yuz fɔ mek bekɛri, ɛn it trey dɛn we nɔ de na maykrowev. Dɛn wan ya kin yuz PET bɔku tɛm bikɔs ɔf in kɔmbaynshɔn fɔ klia, sef, ɛn ɔt rɛsistɛns. PVC kin de na di ɔda pak, bɔt nɔto ɔltɛm usay it sidɔm dairekt.

PVC vs PET in Kɔmɔn Aplikeshɔn dɛn

Insay ɛvride pak, ɔl tu PET ɛn PVC de ple big rol. Bɔku tɛm dɛn kin yuz PET fɔ mek it trey, salad bɔks, ɛn klamshɛl kɔntena. I de kɔntinyu fɔ klia, ivin afta i dɔn fɔm, ɛn i de gi prɛmiɔm luk na shelf dɛn. I strɔng bak fɔ protɛkt di tin dɛn we de insay we dɛn de ship am. PVC dεn kin yus bak insay blista pak εn klamshεl, bכt mכst we dεn kכntrכl di kכst na di prayoritεt. I kin ol shep fayn ɛn i kin sial izi wan bɔt i kin yɔlɔ as tɛm de go if i de na layt.

Insay industrial aplikeshɔn, yu go fɛn PVC mɔ ɛn mɔ. Dɛn kin yuz am bɔku say fɔ sayn, fɔ kɔba dɔst, ɛn fɔ protɛkt yusɛf. I tranga, i izi fɔ mek, ɛn i de wok insay bɔku tik. Yu kin yuz PET bak, mɔ usay dɛn nid fɔ mek transparency ɛn klin, lɛk insay displei kɔva ɔ layt difyuza. Bɔt fɔ rigid panɛl ɔ big sheet nid, PVC na mɔ kɔst-ɛfishin.

Fɔ spɛshal makit dɛn lɛk mɛdikal divays ɛn ilɛktroniks, PET kin win. I klin, stebul, ɛn i sef fɔ yuz am fɔ sɛnsitiv. PETG, we na wan we we dɛn dɔn chenj, kin sho insay tre, shild, ɛn ivin pak dɛn we nɔ gɛt stɛriyl. PVC kin stil yuz na say dɛn we nɔ gɛt kɔntakt ɔ waya insuleshɔn, bɔt dɛn nɔ kin lɛk am so na ay-standad pak.

We pipul dɛn kɔmpia di wok we dɛn de du ɛn di we aw dɛn de liv lɔng, PET de du bɛtɛ na do ɛn ɔnda ɔt. I de stebul, i nɔ de mek UV, ɛn i de ol shep as tɛm de go. PVC kin wɔp ɔ krak if dɛn put am fɔ lɔng tɛm we dɛn nɔ gɛt ɛnitin fɔ ad pan am. So we yu de pik bitwin pvc vs pet fɔ yu prɔdak, tink bɔt aw lɔng i nid fɔ las, ɛn usay dɛn go yuz am.

UV Resistance ɛn Ɔda Aplikeshɔn dɛn

If yu prɔdak nid fɔ liv di san, di UV resistance impɔtant pasmak. PET de du bɛtɛ ɔnda lɔng ɛksplɔshɔn. I de ol in klia, i nɔ de yɔlɔ fast, ɛn i de kip in mɛkanikal trɛnk. Na dat mek pipul dɛn kin pik am fɔ sayn dɛn na do, fɔ sho tin dɛn we dɛn de sɛl, ɔ fɔ pak tin dɛn we di san de shayn.

PVC nɔ de handle UV kwik kwik wan. If yu nɔ gɛt ɛnitin fɔ ad, i kin chenj in kɔlɔ, i kin brok, ɔ i kin lɔs trɛnk as tɛm de go. Bɔku tɛm yu go si ol PVC sheet dɛn de tɔn yɔlɔ ɔ krak, mɔ na say dɛn we de na do lɛk tɛmporari kɔva ɔ sayn. I nid ɛkstra protɛkshɔn fɔ mek i nɔ de chenj ɔnda di san ɛn ren.

Laki, dɛn kin trit ɔl tu di tin dɛn. Bɔku tɛm, PET kin kam wit UV blɔk dɛn we dɛn bil insay, we kin ɛp fɔ mek di tin klia fɔ lɔng tɛm. PVC kin miks wit UV stebyulayza ɔ kɔba am wit spɛshal kɔtin. Dɛn tin ya we dɛn kin ad kin mek i ebul fɔ chenj di wɛda, bɔt dɛn kin mek di kɔst go ɔp ɛn nɔto ɔltɛm dɛn kin sɔlv di prɔblɛm ful wan.

If yu de kɔmpia pvc ɔ pet sheet opshɔn fɔ yuz na do, tink bɔt aw lɔng di prɔdak fɔ las. PET na mɔ rilibul fɔ ɛksplɔshɔn ɔlsay na di ia, we PVC kin wok bɛtɛ fɔ shɔt tɛm ɔ shed instɔleshɔn.

HSQY PLASTIC GROUP in PETG Klia Shit ɛn Had PVC Shit dɛn Transparent

PETG Klia Shit

HSQY PLASTIK GRUPU's PETG klia sheet na fɔ trɛnk, klia, ɛn izi fɔ shep. Dɛn sabi am fɔ in ay transparency ɛn impak tafnɛs, we mek i fayn fɔ vijual displei ɛn protɛktiv panɛl. I nɔ kin gri wit di wɛda, i kin ol ɔp ɔnda yu yuz am ɛvride, ɛn i kin stebul we yu de na do.

Wan tin we impɔtant pas ɔl na di we aw i kin mek di ples wam. PETG kin shep witout pre-drying, we kin kɔt prɛp tɛm ɛn sev ɛnaji. I kin bɛn ɛn kɔt izi wan, ɛn i kin gri fɔ print dairekt wan. Dat min se wi kin yuz am fɔ pak, sayn, rital displei, ɔ ivin fɔnicha kɔmpɔnɛnt dɛn. I de sef bak fɔ it, we mek i fayn fɔ yuz tre, lid, ɔ kɔntena dɛn we dɛn kin yuz fɔ sɛl.

Na di besik speks:

Ficha	PETG Klia Shit
Tiknɛs Rɛnj	0,2 mm to 6 mm
Di Sayz dɛn we De	700x1000 mm, 915x1830 mm, 1220x2440 mm
Surface Finish na di wɔl	Glos, mat, ɔ kɔstɔm frɔst
Di Kɔlɔ dɛn we De	Klia, kɔstɔm opshɔn dɛn de
Di We aw Dɛn De Fɔm	Tɛmofɔmin, kɔt, printin
Fɔd Kɔntakt Sef	Yɛs

Hard PVC Sheets Transparent we yu de yuz

Fɔ wok dɛn we de aks fɔ ay kemikal rɛsistɛns ɛn strɔng rigiditi, HSQY de gi had transparent PVC sheet dɛn . Dɛn sheet ya de gi sɔlid visual klia ɛn surface flatness. Dɛn kin kil dɛnsɛf ɛn dɛn bil dɛn fɔ ebul fɔ handle tranga envayrɔmɛnt, insay os ɛn na do.

Wi kin mek dɛn bay we wi de yuz tu difrɛn we dɛn. PVC sheet dɛn we dɛn dɔn ɛkstrud de gi mɔ klia. Sheet dɛn we gɛt kalenda kin mek di say we dɛn de yuz fɔ mek di say we dɛn de, kin smol fayn fayn wan. Dɛn kin yuz dɛn tu kayn tin ya fɔ pak blista, kad, steshɔnari, ɛn sɔm kɔnstrɔkshɔn yuz dɛn. Dɛn izi fɔ day-kat ɛn laminate ɛn dɛn kin kɔstɔmayz fɔ kɔlɔ ɛn sɔfays finish.

Na di teknikol ditel dem:

Ficha	Hard PVC Sheets Transparent
Tiknɛs Rɛnj	0,06 mm to 6,5 mm
Wayd	80 mm to 1280 mm
Surface Finish na di wɔl	Glos, mat, frɔst
Di tin dɛn we yu kin pik fɔ gɛt kɔlɔ	Klia, blu, grey, kɔstɔm kɔlɔ dɛn
MOQ we gɛt fɔ du wit am	1000 kg we yu de yuz
Waf	Shanghai ɔ Ningbo
Di we aw dɛn de mek di tin dɛn	Extrusion, we dɛn kin mek kalɛnda
Aplikeshɔn dɛn	Pak, kɔnstrɔkshɔn panɛl, kad

Plastik Kɔmpiashɔn PVC PET: Uswan Yu Fɔ Pik?

Fɔ pik bitwin PET ɛn PVC dipen pan wetin yu prɔjek nid. Bɔku tɛm, na di bajɛt na di fɔs tin we dɛn kin wɔri bɔt. PVC kin kɔst less upfront. I izi fɔ sɔs insay bɔku bɔku wan ɛn i de gi gud rigiditi fɔ di prayz. If di gol na besik strɔkchɔ ɔ shɔt tɛm displei, PVC kin du di wok fayn fayn wan we i nɔ go brok yu badjɛt.

Bɔt we yu bisin mɔ bɔt klia, fɔ de te, ɔ fɔ kɔntinyu fɔ de, PET kin bi di bɛtɛ opshɔn. I de wok bɛtɛ we yu de yuz am na do, i nɔ de pwɛl di UV, ɛn i izi fɔ yuz am bak. I de sef bak fɔ it ɛn dɛn dɔn gri fɔ mek pɔsin kɔntakt am dairekt na bɔku kɔntri dɛn. If yu de mek pak fɔ ay-ɛnd prɔdak, ɔ yu nid lɔng shelf layf ɛn strɔng brand imej, PET go gi bɛtɛ rizɔlt.

PVC stil gɛt in bɛnifit dɛn. I de gi fayn fayn kemikal rɛsistɛns ɛn fleksibiliti insay finish. I fayn fɔ sayn, blista pak, ɛn industrial aplikeshɔn usay it kɔntakt nɔto sɔntin we de mɔna. Plɛs, i izi fɔ kɔt ɛn fɔm yuz kɔmɔn ikwipmɛnt. I de sɔpɔt bak mɔ kɔlɔ ɛn tɛkstɔr.

Sɔntɛnde, biznɛs dɛn kin luk pas jɔs pvc ɔ pet sheet tayp dɛn. Dɛn kin blɛnd matirial ɔ pik ɔda we dɛn lɛk PETG, we de ad ɛkstra tafnɛs ɛn fɔmabiliti to standad PET. Ɔda wan dɛn kin go wit bɔku layt strɔkchɔ dɛn we kin jɔyn bɛnifit dɛn frɔm ɔl tu di plastic dɛn. Dis kin wok fayn we wan matirial de handle strɔkchɔ ɛn di ɔda wan de manej fɔ sial ɔ fɔ mek i klia.

Na dis na wan kwik sayd-bay-sayd gayd:

Factor	PET	PVC
Di Fɔs Kɔst	I pas am pas dat	Ridyus
Fɔd Kɔntakt	Dɔn gri	Bɔku tɛm, dɛn kin stɔp am
UV/Yuz na do	Strɔng Resistɛns	Nid fɔ Additiv dɛn
Risaykul we pɔsin kin yuz	Ay	Lo
Print/Klari	Wɛl dɔn	Gud
Kεmikכl Resistεns	Soba	Wɛl dɔn
Fleksibiliti fɔ Finish	Limitɛd	Waid Rɛnj
Best For	Fɔd pak, mɛrɛsin, rital	Industrial, sayn, badjɛt pak dɛn

Dɔn

We yu kɔmpia PET ɛn PVC matirial dɛn, ɛni wan de gi klia trɛnk dipen pan di wok. PET de gi bɛtɛ risaykul, it sef, ɛn UV stebiliti. PVC win pan kɔst, fleksibiliti in finish, ɛn kemikal rɛsistɛns. Fɔ pik di rayt wan dipen pan yu badjɛt, aplikeshɔn, ɛn sastaynabiliti gol dɛm. Fɔ ɛkspɛkt ɛp wit PETG klia shit ɔ transparent had PVC, rich to HSQY PLASTIC GROUP tide.

FAQ dɛn we dɛn kin aks

1. Wetin na di men difrɛns bitwin PET ɛn PVC?

PET klia, strɔng, ɛn dɛn kin yuz am bak. PVC nɔ dia, i strɔng, ɛn i izi fɔ kɔstɔmayz fɔ yuz na di industri.

2. PET sef pas PVC fɔ kɔntakt it?

Yɛs. PET na di wɔl aprɔv fɔ dairekt it kɔntakt, we PVC gɛt ristrikshɔn pas nɔmɔ dɛn mek am spɛshal wan.

3. Us matirial bɛtɛ fɔ yuz na do?

PET gɛt bɛtɛ UV ɛn wɛda rɛsistɛns. PVC nid aditiv fɔ mek i nɔ yɔlɔ ɔ krak na do.

4. Yu tink se dɛn kin risaykul ɔl tu di PET ɛn PVC?

PET de risaykul bɔku bɔku wan akɔdin to rijyɔn dɛn. PVC at fɔ prosɛs ɛn dɛn nɔ kin aksept am bɛtɛ na munisipaliti sistɛm.

5. Uswan we fit fɔ pak ay-ɛnd?

PET bɛtɛ fɔ prɛmiɔm pak. I de gi klia, printabl, ɛn mit fud-grɛd ɛn sefty standad.