Sɔlid Polikabɔnɛt Shit

Sɔlid Polikabɔnɛt Shit Manufacturer

HSQY PLASTIC de mek ɛn saplae sɔlid polikabɔnɛt shit fɔ akitɔkchral glaz, ruf, skaylayt, mashin gad, sefty barɛri, sawnd barɛri, sayn, industrial fabrikeshɔn, ikwipmɛnt kɔva ɛn transparent protɛktiv panɛl.

Dɛn kin kɔl am bak sɔlid PC shit, monolitik polikabɔnɛt shit, klia polikabɔnɛt panɛl ɔ flat polikabɔnɛt shit , sɔlid polikabɔnɛt de kam togɛda ay impak rɛsistɛns, yusful optik klia, rili lɔw wet ɛn gud fabrikeshɔn kapabiliti.

HSQY in men-strim sɔlid PC shit prodakt dɛn kɔba lɛk 0.8–20 mm tiknɛs , wit transparent, transparent-kɔlɔ ɛn opaque-kɔlɔ opshɔn dɛn. Standart ɛn kɔstɔm shit dimɛnshɔn, UV-protɛkt gred, smol, glos, mat ɛn frɔst sɔfays, kɔt-to-sayz prɔsesin ɛn ɔda fɛnshɔnal opshɔn dɛn kin tɔk bɔt akɔdin to wetin di prɔjek nid.

Wetin Na Sɔlid Polikabɔnɛt Shit?

Sɔlid polikabɔnɛt shit na wan layt tɛmplastik panɛl we dɛn mek wit polikabɔnɛt rɛsin. Nɔ lɛk multiwall polycarbonate, we gɛt intanɛnt olo chɛmba, wan sɔlid PC sheet gɛt kɔntinyu matirial strɔkchɔ ɔlsay na in tik.

Klia gred dɛn de mek pɔsin si tin lɛk glas we i de gi bɔku bɔku tin fɔ mek i nɔ ambɔg pas ɔdinari glas. Dis de mek sɔlid polikabɔnɛt patikyula yusful usay transparency ɛn fizik protɛkshɔn ɔl tu nid.

Dipen pan di gred, di say we dɛn kɔt ɛn di kɔtin, dɛn kin yuz sɔlid polikabɔnɛt insay ɔ na do ɛn dɛn kin kɔt, drɔ, rout, bɛn, thermoformed, print ɛn mek am to finished components.

Sɔlid Polikabɔnɛt Shit Spɛsifikeshɔn dɛn

Sɔntin	Sɔlid Polikabɔnɛt Shit / Sɔlid PC Shit / Monolitik Polikabɔnɛt Panɛl
Tin dɛn	Polikabɔnɛt (PC) .
Main Solid Sheet Tiknɛs fɔ di tin dɛn we de apin	aprכksimatli 0.8–20 mm akɔdin to di kכrant prodakt famili εn kכstכmayzεshכn rikwaymεnt dεm
Di Sayz dɛn we Kɔmɔn fɔ Shit	Na lɛk 1220 × 2400 mm, 1200 × 2150 mm ɛn kɔstɔm dimɛnshɔn dɛn akɔdin to di prɔdak ɛn prɔjek
Kɔlɔ	Klia, transparent tinted, posin wayt, milk wayt, opaque ɛn kɔstɔm kɔlɔ dɛn
Sho	Smɔl, glos, mat, frɔst ɛn sɛlɛkɛt tɛkstɔr ɔ fɛnshɔnal sɔfays
Protɛkshɔn fɔ UV	UV-protɛkt opshɔn dɛn we de fɔ ɛkstirian aplikeshɔn dɛn; ekzak UV strכkchכ fכ kכnfכm bay prodak
Layt Transmishɔn	Di klia HSQY gred dɛn we dɛn dɔn pik kin gi lɛk 88% layt transmishɔn; di valyu de difrεn wit di tik, tint εn di sכfa
Fabrikeshɔn fɔ mek tin dɛn	Kɔt, drɔl, routin, panch, bɛnd, polish, bond, engraving, printin ɛn thermoforming
Tipik Aplikeshɔn dɛn	Glazing, ruf, skaylayt, kanopi, mashin gad, protɛktiv barɛri, sawnd barɛri, sayn, displei ɛn industrial kɔmpɔnɛnt dɛn
Kastom Opshɔn dɛn	Tik, dimɛnshɔn, kɔlɔ, UV protɛkshɔn, sɔfa, printin, fabrikeshɔn, drɔlin ɛn kɔt-to-sayz prɔsesin

Ki Bɛnifit dɛn fɔ Sɔlid Polikabɔnɛt Shit dɛn

High Impact Resistance: Dɛn kin pik polycarbonate fɔ aplikeshɔn usay akrilik ɔ ɔdinari glas kin krak ɔ brok ɔnda mɛkanikal impak.

High Optical Clarity: Klia PC sheet de gi gud layt transmishɔn fɔ glazing, sefty skrin, mashin gad ɛn transparent akitekchral panɛl.

Lɔwa Weyt Pas Glas: Polikabɔnɛt panɛl dɛn layt pas glas panɛl we gɛt ikwal eria, we kin mek i izi fɔ ol ɛn instɔl.

UV-Protected Options: Di gred dɛn we de na do kin yuz UV protɛkshɔn fɔ ridyus di yɔlɔ ɛn fɔ lɔs di wok we dɛn kin du bikɔs dɛn de na di san fɔ lɔng tɛm.

Gud Fabrikeshɔn Kapabiliti: Sɔlid PC shit kin kɔt, drɔ, rout, bɛn ɛn thermoformed insay kɔstɔmayz kɔmpɔnɛnt dɛn.

Waid Dizayn Fleksibiliti: Klia, tinted, opaque, glossy, mat, frosted ɛn spɛshal-grɛd prodak dɛn kin sɔpɔt akitekchral, ​​industrial ɛn displei aplikeshɔn dɛn.

Fɔnshɔnal Gred: Dɛn kin ebul fɔ evaluate anti-statik, flame-retardant, abrasion-resistant, tɛkstɔr ɛn ɔda spɛshal polycarbonate sɔlvishɔn usay standad klia PC nɔ inof.

Sɔlid Polikabɔnɛt Shit Aplikeshɔn dɛn

Akitekchɔral Glazing

Sɔlid polycarbonate sheet kin yuz as laytwɛt transparent glazing fɔ kɔmɛshɔnal bildin, faktri, pɔblik fasiliti, intɛriɔ patishɔn ɛn akitekchral ficha usay impak rɛsistɛns impɔtant.

Skaylayt ɛn Kanopi dɛn

Yu kin yuz UV-protɛkt klia ɔ tint polycarbonate panɛl fɔ skaylayt, ɛntrɛ kanopi, wok we kɔva, patio kɔva ɛn ɔda tin dɛn we tan lɛk dat we nid de layt ɛn wɛda protɛkshɔn.

Mashin Gad dɛn

Transparent solid PC sheet na tin we dɛn kin yuz bɔku bɔku wan fɔ industrial mashin gad bikɔs di wan dɛn we de wok kin si di ikwipmɛnt dɛn we dɛn de stil separet frɔm di komponent dɛn we de muv, chips ɛn ɔda mɛkanikal hazad dɛn.

Di tik we dɛn nid fɔ pik akɔdin to di gad dimɛnshɔn, sɔpɔt spɛshal, pɔtɛnɛshɛl impak ɛnaji ɛn di aplikebul mashin-sefty rikwaymɛnt dɛn.

Sefty Skrin ɛn Protɛktiv Barɛri

Sɔlid polycarbonate kin mek am insay protɛktiv skrin, shild, patishɔn ɛn anti-vandal panɛl fɔ industrial, rital ɛn pɔblik-spɛs aplikeshɔn.

Di tin dɛn we de ambɔg di sawnd

Tik sɔlid polikabɔnɛt panɛl dɛn kin tink bɔt fɔ transparent akostik barɛri along rod, rel sistɛm, industrial fasiliti ɛn ɔda say dɛn usay ɔl tu di visibiliti ɛn nɔys-kɔntrol kɔnstrɔkshɔn nid fɔ de.

Akostik dizayn fɔ bi bays pan kɔmplit barɛri kɔnstrɔkshɔn, panɛl tiknes, sɔpɔt strɔkchɔ ɛn target sawnd-ridɔkshɔn rikwaymɛnt pas matirial nɔmɔ.

Sayn dɛn ɛn Displei dɛn

Yu kin yuz PC sheet dɛn we yu kin print ɛn we yu kin fɔm fɔ sayn dɛn we gɛt layt, panɛl dɛn we dɛn print, displei kɔmpɔnɛnt dɛn, mɛnyu bɔd dɛn, advatayzmɛnt panɛl dɛn ɛn sayn fes dɛn we dɛn dɔn mek wit tɛmɔfɔm.

Indastrial Fabrikeshɔn

Dɛn kin kɔt, rout, drɔl, bɛn ɛn thermoformed polycarbonate sheet insay ikwipmɛnt kɔva, haus, protɛktiv panɛl, gad ɛn ɔda fabriket kɔmpɔnɛnt dɛn.

Solid Polycarbonate Sheet fɔ Ruf

Sɔlid PC panɛl dɛn kin yuz insay transparent ruf ɛn kanopi prɔjek usay impak rɛsistɛns ɛn klia visibiliti na prayorities.

Ruf dizayn fɔ tink bɔt panɛl tik, sɔpɔt spɛshal, briz lod, sno lod, tɛmal ɛkspɛnshɔn, drenaj slɔp, fiksin we, UV ɔriɛnteshɔn ɛn lokal bildin rikwaymɛnt.

Fɔ prɔjek dɛn we de pe atɛnshɔn mɔ pan ruf sistem, kɔrɛkt profayl ɔ laytwɛt olo panɛl, pipul dɛn we de bay kin rivyu bak        Polikabɔnɛt Ruf Sheet dɛn,        Kɔrɔgɛt Polikabɔnɛt Shit        ɛn        Multiwall Polikabɔnɛt Shit dɛn.

UV-Protɛkt Sɔlid Polikabɔnɛt Shit

Standard indoor polycarbonate ɛn UV-protected outdoor polycarbonate nɔ fɔ trit ɔtomɛtik wan lɛk di sem prodak.

Di glazing we de na do ɛn di ruf kin gɛt ɔltra vayolɛt fɔ lɔng tɛm. Wan fayn UV-protɛkt PC gred de ɛp fɔ ridyus yɔlɔ, lɔs fɔ klia ɛn fɔ pwɛl di mɛkanikal pefɔmɛns we dɛn de yuz am na do.

We yu de ɔda matirial fɔ instɔleshɔn na do, kɔnfɔm if yu nid fɔ gɛt UV protɛkshɔn pan wan say we de na do ɔ ɔl tu di say dɛn, ɛn mek shɔ se di instɔleshɔn ɔriɛnteshɔn fala di prɔdak spɛsifikɛshɔn we dɛn dɔn gri fɔ.

Klia, Tint ɛn Opak Polikabɔnɛt Shit

Kɔlɔ Tayp	Men Bɛnifit	Tipik Aplikeshɔn dɛn
Klia	Maksimal visibiliti ɛn de layt	Mashin gad, glaz, skaylayt, shild ɛn transparent barɛri
Bronz / Grey / Tint we dɛn dɔn mek	Ridyus di braytnɛs we pɔsin kin si we i de kip pat pan di transparency	Kanopi, akitekchɔ, patishɔn ɛn dɛkɔretiv glazing
Opal / Wait wan	Difyuz layt ɛn ridyus di dairekt visibiliti	Layt, sayn, prayvet panɛl ɛn dɛkɔretiv aplikeshɔn dɛn
Kastom Kɔlɔ dɛn	Sɔpɔt branding ɛn akitekchral dizayn	Sayn, displei, akitekchral panɛl ɛn kɔstɔm industrial prodak

Glossy, Matte, Frosted ɛn Tekstɔr PC Shit dɛn

Surface	Apearance	Tipik Yuz
Glossy / Smɔl tin	High clarity ɛn smol sɔfays	Glazing, mashin gad ɛn transparent protɛktiv panɛl dɛn
Mat	Ridyus sɔfayz riflɛkshɔn	Displei, printin ɛn dɛkɔretiv kɔmpɔnɛnt dɛn
Frosted we dɛn mek	Difyuz translucent apinans	Prayvesi panɛl, patishɔn ɛn dɛkɔretiv glazing
Tekstur we dɛn mek	Patɛn ɔ ɛmbos sɔfays	Difyushɔn, prayvet pat, dɛkɔretiv ɛn spɛshal industrial aplikeshɔn dɛn

Standart vs. Anti-Skrat Polikarbonɛt Shit

High impact resistance ɛn surface skratch resistance na difrɛn matirial prɔpati dɛn.

Standard polycarbonate na ekstrimli taf bot in surface kin stil skrach we yu de klin am bak, abrashon o kontak wit had tin.

Aplikeshɔn dɛn lɛk transpɔt glaz, sefty skrin we dɛn kin klin bɔku tɛm ɔ ay-kɔntakt protɛktiv panɛl dɛn kin nid spɛshal PC prodak we gɛt had-kɔt ɔ abrashɔn-rɛsistɛns.

Nɔ tink se ɛvri sɔlid polycarbonate sheet gɛt di sem abrasion resistance. If pensil hadnɛs, Taber abrasion ɔ ɔda surface-performance target nid fɔ de, inklud di tɛst standad ɛn target valyu insay yu inkwyuizhɔ.

Solid Polycarbonate Sheet vs. Akrilik Shit

Ficha	Polikabonayt	Akrilik
Impekt Resistans fɔ mek yu nɔ gɛt ɛnitin fɔ du wit am	I rili ay; dɛn kin lɛk fɔ yuz dɛn fɔ sef ɛn fɔ protɛkt dɛnsɛf	Lɔwa impak rɛsistɛns ɛn mɔ lɛk fɔ krak ɔnda ebi impak
Optik Apɛndiks	Ay klia wan	Ekselen optik klia
Sɔfays Hadnɛs	Standard PC na rili izi fɔ skrach pas nɔmɔ dɛn kɔt am had	Jɛnɛral bɛtɛ inhɛrɛnt skrach rɛsistɛns
Fɔm fɔm	Gud bending ɛn thermoforming kapabiliti	I kin fɔm bak bɔt i kin brit mɔ di tɛm we sɔm fabrikeshɔn ɔpreshɔn dɛn de
Di bɛst we fɔ fit am	Mashin gad, sefty glaz, impak barɛri ɛn ay-durabiliti strɔkchɔ	Displei, sayn ɛn aplikeshɔn dɛn we de prayoritɛt di sɔfayz apinɛns ɛn optik klia

Sɔlid Polikabɔnɛt vs. Maltiwɔl Polikabɔnɛt

Ficha	Sɔlid Polikabɔnɛt	Maltiwɔl Polikabɔnɛt
Bildin	Kɔntinyu fɔ gɛt sɔlid panɛl	Holo intanɛnt chamba dɛn
Di we aw pɔsin kin si tin	Bɛtɛ dairekt transparency	di rib dεm we de insay de stil de fכ si
Impekt Protɛkshɔn	Ekselen fɔ sefty glazing ɛn gad dɛn	Strɔng bɔt ɔptimayz mɔ to laytwɛt kɔnstrɔkshɔn
Insuleshɔn fɔ Tɛmral	Dipen men wan pan di panɛl tik	Hollow chambers kin impruv insuleshɔn pefɔmɛns
Tipik Aplikeshɔn dɛn	Mashin gad, transparent barɛri, glazing ɛn sikyɔriti panɛl	Grinhaus, ruf, skaylayt ɛn inshɔlet bildin panɛl dɛn

Aw fɔ Pik Sɔlid Polikabɔnɛt Shit Tiknɛs

Di kɔrɛkt tiknɛs dipen pan di panɛl dimɛnshɔn, sɔpɔt spɛshal, ɛkspɛkt impak, briz lod, sno lod, bɛnd rikwaymɛnt ɛn fayn aplikeshɔn. Di rεnj dεm we de kam biεn na jεnarכl sεlεkshכn dεyshכn pas strכkchכral-dizayn valyu dεm.

Tiknes	Jɛnɛral Sɛlɛkshɔn Dairekshɔn
0,8–2 mm	Tin panɛl, printin, fɔm kɔmpɔnɛnt, protɛktiv kɔva ɛn laytwɛt fabrikeshɔn
2–4 mm	Sayn dɛn, gad dɛn, patishɔn dɛn, smɔl glazing panɛl dɛn ɛn layt-duti kanopi dɛn
4–6 mm	Akitekchral panɛl, mashin gad, skaylayt ɛn midul-duti protɛktiv glazing
6–10 mm	Big big gad dɛn, ruf panɛl dɛn, sef barɛri dɛn ɛn glazing we ebi pasmak
10–20 mm	Hevi-duti protɛktiv panɛl, tik glazing, akostik barɛri ɛn dimand industrial prɔjek dɛn

Fɔ strɔkchɔral glazing, ruf, mashin sef ɔ pɔblik-protɛkshɔn aplikeshɔn, dɛn fɔ chɛk di tik we dɛn yuz di aktual dizayn lod ɛn di aplikebul injinɛri standad dɛn.

Fɔ kɔt Sɔlid Polikabɔnɛt Shit

Sɔlid PC sheet dɛn kin kɔt yuz fayn saw, CNC routers ɛn ɔda plastic-fabrikeshɔn ikwipmɛnt.

Tul sɛlɛkshɔn fɔ tink bɔt di tik we di shit tik, di edj we dɛn nid fɔ dɔn, di spid we dɛn de mek ɛn if di shit gɛt fim we de protɛkt am.

HSQY kin tɔk bɔt kɔstɔm kɔt-to-sayz prɔsesin fɔ B2B prɔjek fɔ ridyus daunstrim kɔt ɛn matirial west.

Dril Polikabɔnɛt Shit

Polikabɔnɛt kin drɔ fɔ mɛkanikal fiks, fabrikeshɔn ɛn instɔleshɔn.

Di instɔleshɔn dɛn we de na do fɔ alaw fɔ mek dɛn gɛt tɛmal ɛkspɛnshɔn rawnd fastɛns ɛn panɛl ed dɛn. Ɔl dɛn nɔ fɔ mek lokal strɛs pasmak, mɔ nia di ed dɛn we di shit de.

Kold Bɛndin Sɔlid Polikabɔnɛt Shit

Sɔlid polycarbonate kin kol kɔv fɔ fayn akitekchral ɛn fabricated aplikeshɔn dɛn.

Di minim sef bɛnd rayus dipen pan di shit tik, matirial gred, UV layt ɛn instɔleshɔn kɔndishɔn. Nɔ aplay wan yunivasal bɛnd rayus to ɛvri PC sheet.

Gi tik ɛn kɔva we yu nid we yu de aks fɔ matirial fɔ kɔba kanopi ɔ kɔva.

Hɛt Bɛnd ɛn Tɛmofɔmin

Sɔlid polycarbonate kin bak wit ɔt bɛnt ɔ thermoformed insay kɔba kɔva, dome, sayn fes, gad ɛn kɔstɔm tri-dimɛnshɔnal kɔmpɔnɛnt dɛn.

Fɔm pefɔmɛns dipen pan sheet tik, drying, ɔt yunifom, mold dizayn, drɔ dip ɛn kol kɔndishɔn.

Aplikeshɔn dɛn we nid tayt dimɛnshɔnal kɔntrol fɔ tray-fɔm bifo ful prodakshɔn.

Printin pan Polikabɔnɛt Shit

Suitabl PC sheet gred kin sɔpɔt skrin printin, UV flatbed printin ɛn ɔda printin prɔses.

Ink adheshon dipen pan surface finish, printin method, ink chemistry, curing system en eni coating we dem put pan di polycarbonate.

Dɛn fɔ tɛst di sampul dɛn wit di rial ink ɛn di tin dɛn we dɛn de yuz fɔ print bifo dɛn mek dɛn bɔku bɔku wan.

Polikabɔnɛt Shit we nɔ de mek flaym

Polycarbonate naturally gɛt difrɛn faya bihayvya frɔm bɔku komoditi plastic, bɔt di ɛksaktɔl faya rɛytin dipen pan rɛsin fɔmyulashɔn, tik ɛn aplikebul tɛst standad.

HSQY kin tɔk bɔt flame-retardant sɔlid PC opshɔn fɔ prɔjek dɛn we nid fɔ impɔtant faya pefɔmɛns.

If UL 94, bildin-matirial klasification, relwe, transpɔt ɔ ɔda faya standad nid fɔ de, spɛsifa di ɛksaktɔl standad ɛn target klasification bifo kot. Faya retinj fɔ wan PC gred ɔ tik nɔ fɔ aplay ɔtomɛtik wan pan ɛvri polycarbonate sheet.

Anti-Statik Polikabɔnɛt Shit

Standard polycarbonate nɔ fɔ bi ɔtomɛtik wan fɔ bi anti-statik.

Ilɛktronik, klin rum, ikwipmɛnt-kɔva ɛn sɛnsitiv industrial aplikeshɔn dɛn kin nid spɛshal anti-statik ɔ ESD-kɔntrol shit.

Di wan dɛn we de bay fɔ spɛsifa di sɔfays rɛsistɛns we dɛn nid, di we aw dɛn de tɛst am, aw di anti-statik fɛnshɔn go de sote go ɛn if di tritmɛnt nid fɔ de pan wan ɔ ɔl tu di sɔfays dɛn.

Tɛmral Ɛkspɛnshɔn insay Polikabɔnɛt Instɔlɛshɔn

Polikabɔnɛt de bɔku ɛn kɔntrakt as di tɛmpracha de chenj, so dɛn nɔ fɔ instɔl panɛl dɛn we de na do lɛk se na glas we dɛn dɔn fiks di dimɛnshɔnal.

Glazing chanɛl, ol dɛn we dɛn dɔn drɔ, fastɛns ɛn ed kliarens fɔ gi di rayt alawɛns fɔ muv.

Di alawɛns we dɛn nid de dipen pan di sheet dimɛnshɔn, di tɛmpracha rɛnj we dɛn de ɛkspɛkt ɛn di instɔleshɔn sistɛm.

Klin Sɔlid Polikabɔnɛt Shit

Yuz klin wata we nɔ gɛt bɛtɛ wata, sop we nɔ gɛt bɛtɛ trɛnk ɔ wan kɔmpatib nyutral ditajɛn togɛda wit sɔft klos ɔ spɔnj.

Nɔ yuz abrasive pad, dray wayp pan dɔti sɔfays ɛn agresiv sɔlvɛnt dɛn we dɛn nɔ kɔnfyus se i kɔmpitabl wit di polycarbonate gred ɔ kɔtin we yu dɔn pik.

Di say dɛn we dɛn kɔt had ɔ spɛshal say dɛn kin gɛt dɛn yon instrɔkshɔn fɔ klin, we fɔ tek di fɔs tin pas di jenɛral gaydlayn dɛn.

Aw fɔ Pik di Rayt Sɔlid Polikabɔnɛt Shit

1. Difayn di Aplikeshɔn

Spɛsifik if di sheet na fɔ ruf, glaz, mashin gad, sayn, sawnd barɛri, sef skrin, tɛmɔfɔm ɔ ɔda aplikeshɔn.

2. Pik di Tik we yu nid

Gi tik we de naw, panɛl dimɛnshɔn, sɔpɔt spɛshal ɛn mɛkanikal rikwaymɛnt usay i de.

3. Kɔnfɛm Yuz insay os ɔ na do

Di aplikeshɔn dɛn we dɛn kin yuz na do fɔ sho di tin dɛn we dɛn nid fɔ protɛkt frɔm UV ɛn di kɔndishɔn dɛn we dɛn kin put dɛn na do.

4. Pik Klia, Tint ɔ Opak

Gi kɔlɔ we yu nid, layt transmishɔn ɔ wan kɔlɔ rɛfrɛns we dɛn dɔn gri fɔ we di we aw yu de si impɔtant.

5. Pik di Surface Finish

Pik smol, glos, mat, frɔst, tɛkstɔr ɔ wan funkshɔnal kɔt sɔfays akɔdin to optik ɛn durabiliti rikwaymɛnt.

6. Kɔnfɔm di Impɛkt ɛn Sefty Rikwaymɛnt dɛn

Mashin gad, sikyɔriti barɛri ɛn pɔblik glaz kin nid fɔ mek dɛn tɛst di impak we dɛn de du fɔ di prɔjek ɔ fɔ mek dɛn fala di standad dɛn we dɛn fɔ fala.

7. Kɔnfɔm di Faya Rikwaymɛnt dɛn

If flame-retardant pefɔmɛns nid fɔ de, gi di ɛksaktɔ tɛst standad ɛn di klasification we dɛn nid.

8. Kɔnfɔm Fabrikeshɔn

Tɛl HSQY if yu nid fɔ kɔt, drɔ, bɛnd, thermoform, print, engraving, polish ɔ bonding.

9. Kɔnfɔm Surface Durability

Panɛl dɛn we dɛn kin ol ɔ klin bɔku tɛm kin nid fɔ gɛt tritmɛnt we nɔ de abrashɔn ɔ we nɔ de skrach.

10. Test Sampul dɛn

Test optik apinans, kɔt, drɔl, bɛnd, print, kɔt ɛn finish-pat pefɔmɛns bifo yu apruv wan big kɔstɔmayz ɔda.

Kastom Sɔlid Polikabɔnɛt Shit Prɔsesin

HSQY de sɔpɔt kɔstɔmayz polikabɔnɛt prɔsesin fɔ kɔnstrɔkshɔn kɔmni dɛn, industrial manifakta dɛn, ikwipmɛnt bilda dɛn, sayn kɔmni dɛn, plastic fabricatɔ dɛn ɛn distribyushɔn dɛn.

Di opshɔn dɛn fɔ prosɛs ɛn kɔstɔmayshɔn kin inklud:

• Kastɔm ​​tiknɛs
       • Kastɔm ​​shit dimɛnshɔn
       • Kɔt-to-sayz panɛl
       • CNC routin
       • Drlin ɛn panch
       • Ɛj finish
       • Kol bɛnd
       • Ɔt bɛnd
       • Tɛmofɔm
       • Engravin
       • UV flatbed printin
       • Skrin printin
       • Bɔnd ɛn asɛmbli
       • Klia, tint ɔ kɔstɔm kɔlɔ
       • Mat, frɔst ɔ tɛkstɔr sɔfays
       • UV-protɛkt gred
       • Anti-statik gred dɛn
       • Gred dɛn we nɔ de mek flaym
       • Opshɔn dɛn we nɔ de abrashɔn

Kastom Polikabɔnɛt Shit Divɛlɔpmɛnt Prɔses

Step	Prɔses
1. Rivyu fɔ di tin dɛn we dɛn nid	Kɔnfɛm aplikeshɔn, dimɛnshɔn, tik, kɔlɔ, UV rikwaymɛnt ɛn fɛnshɔnal prɔpati dɛn.
2. Di we aw dɛn de pik di tin dɛn we dɛn nid	Selekt standad, UV-protekt, flame-retardant, anti-statik ɔ ɔda fayn PC gred.
3. Rivyu fɔ drɔ	Rivyu panɛl dimɛnshɔn, ol, rayus, bɛnd, tolɛreshɔn ɛn ɔda fabricated ficha dɛn.
4. Sampul Prodakshɔn	Pripia sheet ɔ prɔses sɛmpul usay nid de.
5. Tɛst fɔ Aplikeshɔn	Evaluate fit, optik kwaliti, fabrication, impak rikwaymɛnt ɛn instɔleshɔn kɔndishɔn.
6. Mas Prodakshɔn	Kɔnfɛm fayn spɛsifikɛshɔn, pak ɛn prodakshɔn afta sampul aprɔval.

Sɔlid Polikabɔnɛt Shit Kwaliti Kɔntrol

Impɔtant inspekshɔn ɛn aprɔval paramita dɛn kin inklud:

• Shit tik ɛn tolɛreshɔn
       • Lɛng ɛn witd tolɛreshɔn
       • Shit flatnɛs
       • Optik klia
       • Layt transmishɔn usay dɛn spɛsifa
       • Kɔlɔ kɔnsistɛns
       • Sɔfays dɛfɛkt
       • Protɛktiv film kɔndishɔn
       • UV-protɛkshɔn rikwaymɛnt
       • Impɛkt pefɔmɛns
       • Faya pefɔmɛns usay dɛn spɛsifa
       • Anti-statik pefɔmɛns usay dɛn spɛsifa
       • Abrashɔn rɛsistɛns usay dɛn spɛsifa
       • Kɔt dimɛnshɔn
       • Ɔl ples ɛn dayamita
       • bɛnd dimɛnshɔn
       • Printin adheshon
       • Tɛmofɔmin pefɔmɛns

Pak ɛn Intanɛshɔnal Shipin

Sɔlid polikabɔnɛt shit dɛn kin saplae wit protɛktiv sɔfays film fɔ ridyus skrach ɛn kɔntaminɛshɔn we dɛn de handle, prosɛs ɛn transpɔt.

Ekspɔt pak kin inklud protɛktiv rap, kɔna protɛkshɔn ɛn paletayz pak akɔdin to di sheet dimɛnshɔn, tik ɛn shipmɛnt rikwaymɛnt.

Baya dɛn we de bay big panɛl dɛn fɔ tink bak bɔt di palet dimɛnshɔn ɛn di kɔntena-lod efyushɔn we dɛn de kɔl di land kɔst.

Wetin Mek Yu Pik HSQY as Yu Sɔlid Polikabɔnɛt Shit Manufacturer?

Waid Tiknɛs Rɛnj: HSQY in kɔrɛnt menstrim sɔlid PC shit prodak dɛm kɔba lɛk 0.8–20 mm fɔ laytwɛt ɛn ebi-diuti aplikeshɔn dɛm.

Bɔku Kɔlɔ ɛn Sɔfays: Klia, tint, opak, glos, mat, frɔst ɛn kɔstɔm opshɔn dɛn kin sɔpɔt difrɛn akitɔk ɛn industrial rikwaymɛnt dɛn.

UV-Protected Options: Dɛn kin gi fayn ɛkstirian-grɛd matirial fɔ ruf, glazing, kanopi ɛn ɔda ɔda prɔjek dɛn na do.

Kastɔm ​​Fabrikeshɔn: Dɛn kin tɔk bɔt fɔ kɔt, drɔ, fɔ engrav, fɔ bɛn, fɔ mek tɛmmofɔm, fɔ print, fɔ panch, fɔ polish ɛn fɔ du ɔda tin dɛn akɔdin to di drɔin ɔ sampul dɛn.

Fɔnshɔnal PC Prodakt dɛn: Anti-statik, anti-skrach, tɛkstɔr, frɔst, flaym-rɛtadant ɛn ɔda spɛshal polycarbonate prodak dɛn de insay di HSQY pɔtfɔlio.

Broda Polycarbonate Range: Di kɔstɔma dɛn kin gɛt sɔs bak        Multiwall Polikabɔnɛt Shit,        Kɔrɔgɛt Polikabɔnɛt Shit        ɛn        Polycarbonate Roofing Sheet        akɔdin to di prɔjek strɔkchɔ.

Sampul Evalueshɔn: Dɛn kin yuz sampul dɛn we de fɔ chɛk transparency, kɔlɔ, sɔfa, tik ɛn prɔsesin pefɔmɛns bifo dɛn ɔda bɔku bɔku wan.

Infɔmeshɔn Nid fɔ wan Polikabɔnɛt Shit Kɔt

Aplay fɔm	Glazing, ruf, kanopi, mashin gad, barɛri, sayn, fabrication ɔ ɔda yus
Tik we i tik	Tik ɛn tolɛreshɔn we dɛn nid
Sayz fɔ di Shit	Lɛngth × wit ɔ finish kɔt dimɛnshɔn dɛn we dɛn nid
Kɔlɔ	Klia, tint, wayt, opaque ɔ kɔstɔm kɔlɔ
Sho	Glos, smol, mat, frɔst, tɛkstɔr ɔ funkshɔnal kɔtin
Protɛkshɔn fɔ UV	Insay os, na do, wan sayd we de na do ɔ tu sayd we dɛn nid fɔ ɛksplɔz
Di Tin dɛn we Dɛn nid fɔ Du fɔ Fɔs	Flame retardant, anti-static, anti-skratch, optik, impak ɔ ɔda tin dɛn we dɛn nid
Fabrikeshɔn fɔ mek tin dɛn	Fɔ kɔt, drɔ, bɛnd, print, engrav, thermoforming ɔ ɔda prɔsesin
Drɔin	CAD, PDF drɔin ɔ fizik rɛfrɛns sampul usay dɛn nid fɔ mek am
Advays	Faya, impak, bildin, transpɔt ɔ industrial tɛst standad we dɛn nid
Ɔmɔs	Trayal kwantiti, rɛgyula ɔda kwantiti ɛn ɛstimat ɛni ia dimand
Usay yu de go	Di kɔntri we dɛn de go ɛn di pɔt

Sɔlid Polikabɔnɛt Sheet FAQ

Wetin na sɔlid polikabɔnɛt sheet?

Wan sɔlid polikabɔnɛt shit na kɔntinyu monolitik PC panɛl wit ay impak rɛsistɛns ɛn gud optik klia. Dɛn kin yuz am bɔku say fɔ mek glaz, mashin gad, protɛktiv barɛri, ruf, sayn ɛn industrial fabrication.

Yu tink se sɔlid polikabɔnɛt na di sem wit Lɛksan?

Polycarbonate na di jenɛrik matirial. LEXAN na tredmak we dɛn kin yuz fɔ sɔm patikyula polycarbonate prodak dɛn. Baya dɛn we de luk fɔ sɔlid PC sheet fɔ kɔmpia di aktual matirial gred, tiknɛs, UV protɛkshɔn ɛn tɛst rikwaymɛnt pas fɔ abop pan wan brand nem nɔmɔ.

Us tiknes sɔlid polycarbonate HSQY de gi?

HSQY in men sכlid polycarbonate prodakt dεm naw de kכba aprכksimatli 0.8–20 mm. Eksakt avaylabl dipen pan di kɔlɔ, sɔfa, gred ɛn shit dimɛnshɔn.

Us saiz dɛn fɔ sɔlid polycarbonate sheet de?

Di HSQY prodak dɛm we de naw inklud saiz dɛm we de arawnd 1220 × 2400 mm ɛn 1200 × 2150 mm, we dɛn kin tɔk bɔt kɔstɔm dimɛnshɔn ɛn kɔt-to-sayz prɔsesin akɔdin to di prɔjek.

Yu tink se sɔlid polikabɔnɛt strɔng pas glas?

Polikabɔnɛt de gi bɔku ay rɛsistɛns to impak pas ɔdinari glas ɛn na dat mek dɛn pik am bɔku bɔku wan fɔ mashin gad, sef glaz ɛn protɛktiv barɛri.

Yu tink se polycarbonate sheet nɔ go brok?

Polikabɔnɛt rili impɔk ɛn bɔku tɛm dɛn kin tɔk bɔt am na kɔmɛshɔnal se i nɔ go brok, bɔt dɛn nɔ fɔ tek ɛni shit as sɔntin we nɔ pɔsibul fɔ brok ɔnda ɛvri impak, balistik ɔ eksplɔziv kɔndishɔn.

Yu tink se klia polikabɔnɛt transparent lɛk glas?

Klia polycarbonate de gi ay layt transmishɔn ɛn gud visibiliti. Di HSQY klia gred dɛm we dɛn dɔn pik de list layt transmishɔn te to lɛk 88%, pan ɔl we di ɛksaktɔ valyu kin difrɛn wit tik, sɔfa ɛn kɔlɔ.

Yu tink se sɔlid polikabɔnɛt nɔ de mek i nɔ gɛt UV?

Gred dɛn we gɛt UV-protɛkt de fɔ yuz na do. Nɔ tink se ɛvri jenɛral-pɔpɔs PC sheet gɛt di sem ɔda wɛda pefɔmɛns; kɔnfɔm di UV-protɛkshɔn spɛsifikɛshɔn bifo yu bay matirial fɔ lɔng tɛm san layt.

Yu tink se polikabɔnɛt kin tɔn yɔlɔ na do?

Lכng tεm UV εksposhכn kin afekt polikabכnayt we nכ protεkt. Dɛn mek fayn gred dɛn we gɛt UV-protɛkt fɔ ridyus di yɔlɔ ɛn wɛda, bɔt di rial savis layf dipen pan di gred, di envayrɔmɛnt ɛn di instɔleshɔn.

Yu tink se dɛn kin yuz sɔlid polikabɔnɛt fɔ mek ruf?

Yɛs. UV-protɛkt sɔlid PC panɛl dɛn kin yuz fɔ fayn ruf, skaylayt ɛn kanopi prɔjek dɛn. Panɛl tik, sɔpɔt spɛshal, strɔkchɔral lod ɛn tɛmal ɛkspɛnshɔn fɔ tink bɔt insay di instɔleshɔn dizayn.

Us tiknes polycarbonate a fɔ yuz fɔ ruf?

No universal ruf tiknɛs nɔ de. Di kɔrɛkt chukchuk dipen pan panɛl span, briz lod, sno lod, sɔpɔt sistɛm ɛn lokal bildin rikwaymɛnt. Gi di ruf dimɛnshɔn ɛn sɔpɔt spɛshal fɔ di matirial sɛlɛkshɔn.

Yu tink se dɛn kin yuz sɔlid polikabɔnɛt fɔ mek mashin gad?

Yɛs. Klia sɔlid polycarbonate na in dɛn kin yuz fɔ transparent mashin gad bikɔs ɔf in kɔmbaynshɔn fɔ visibiliti ɛn impak rɛsistɛns. Tik we dɛn nid fɔ pik akɔdin to di gad saiz ɛn di mɛkanikal hazad dɛn we kin apin.

Yu tink se dɛn kin kɔt di polikabɔnɛt sheet to di sayz?

Yɛs. HSQY kin tɔk bɔt kɔstɔm kɔt-to-sayz shit ɛn ɔda fabrikeshɔn lɛk drɔlin, routin ɛn panch akɔdin to drɔin dɛn.

Yu tink se dɛn kin drɔ polikabɔnɛt sheet?

Yɛs. Yu kin drɔ polikabɔnɛt bay we yu yuz fayn tul dɛn. Di instɔleshɔn dɛn we de na do fɔ alaw inof kliarens fɔ mek di tɛmral ɛkspɛnshɔn ɛn avɔyd fɔ strɛs pasmak rawnd di fastɛns dɛn.

Yu tink se dɛn kin bɛn polycarbonate sheet we dɛn nɔ gɛt ɔt?

Suitabl sɔlid PC shit dɛn kin kol kɔba, bɔt di minim bɛnd rayus dipen pan di shit tik ɛn matirial gred. Kɔnfɛm di rayus we yu nid bifo yu mek ɔ instɔl am.

Yu tink se dɛn kin mek sɔlid polikabɔnɛt we dɛn mek wit tɛm?

Yɛs. Dɛn kin mek di rayt gred dɛn we dɛn kin yuz fɔ mek dɛn bi dome, ikwipmɛnt kɔva, sayn ɛn ɔda tri-dimɛnshɔnal pat dɛn. Di kɔndishɔn fɔ dray ɛn fɔm fɔ fala di matirial spɛsifikɛshɔn.

Yu tink se dɛn kin print polikabɔnɛt sheet?

Yɛs. HSQY de saplae prodakt we fit fɔ skrin printin, UV flatbed printin ɛn sɔm ɔda printin prɔses dɛn we dɛn dɔn pik. Ink ɛn sɔfays kɔmpitibiliti fɔ tɛst bifo dɛn mek am.

Yu tink se polikabɔnɛt kin skrach izi wan?

Standard polycarbonate gɛt fayn fayn impak trɛnk bɔt dɛn kin skrach am bay abrasive kɔntakt. Dɛn fɔ tink bɔt opshɔn dɛn we gɛt had-kɔt ɔ we nɔ de abrashɔn we di sɔfays fɔ lɔng tɛm rili impɔtant.

Yu tink se polikabɔnɛt bɛtɛ pas akrilik?

Nɔn pan dɛn tu tin ya nɔ bɛtɛ ɔlsay na di wɔl. Polycarbonate na jɛnɛral wan we dɛn kin lɛk usay impak rɛsistɛns ɛn tafnɛs impɔtant, we akrilik kin lɛk insay aplikeshɔn dɛn we de prayoritayz ay optik klia ɛn inhɛrɛnt sɔfays hadnɛs.

Wetin na di difrɛns bitwin sɔlid ɛn mɔltiwɔl polikabɔnɛt?

Sɔlid polycarbonate gɛt kɔntinyu panɛl strɔkchɔ ɛn i de gi bɛtɛ dairekt visibiliti ɛn ay impak protɛkshɔn. Multiwall polycarbonate gɛt olo chɛmba dɛn, we de mek i layt ɛn bɔku tɛm i kin bɛtɛ fɔ yuz ruf ɛn grin haus we nɔ gɛt wam wam.

Yu tink se polikabɔnɛt we nɔ de mek faya de?

Yɛs. Flame-retardant PC gred dɛn kin saplae fɔ fayn fayn prɔjek dɛn. Spɛsifik di faya standad ɛn klasification we dɛn nid bikɔs faya pefɔmɛns kin difrɛn wit di rɛsin gred ɛn tiknes.

HSQY de gi anti-statik polycarbonate sheet?

HSQY naw de list anti-statik polycarbonate sheet prodakt dɛn. Gi di surface resistance ɛn aplikeshɔn we dɛn nid so dat dɛn go ebul fɔ evaluate di suitable gred.

Aw dɛn fɔ klin di polikabɔnɛt sheet?

Yuz mild sop ɔ kɔmpatib nyutral klin wit wata we nɔ gɛt wam ɛn saf klos ɔ spɔnj. Nɔ yuz abrasive klin tul ɛn agresiv sɔlvɛnt pas dɛn dɔn kɔnfyus se dɛn kɔmpitabl wit di patikyula PC gred ɔ kɔtin.

HSQY kin kɔstɔmayz polycarbonate sheet kɔlɔ dɛn?

Yɛs. Yu kin tɔk bɔt klia, tint, wayt, opak ɛn ɔda kɔstɔm-kɔlɔ opshɔn dɛn akɔdin to di kayn prɔdak, kɔlɔ target ɛn kwantiti we yu bay.

A kin aks fɔ polycarbonate sheet sɛmpul dɛn?

Dɛn kin tɔk bɔt di sampul dɛn we de fɔ chɛk di tik, klia, kɔlɔ, sɔfa, UV rikwaymɛnt, printin ɛn fabrikeshɔn pefɔmɛns bifo bɔku ɔda.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi aplikeshɔn, tik we dɛn nid, di dimɛnshɔn fɔ di shit, di kɔlɔ, di sɔfa, yuz insay ɔ na do, UV rikwaymɛnt, fabrikeshɔn drɔin, aplikebul tɛst standad, ɛstimat kwantiti ɛn ples fɔ go.

Rikwest wan Sɔlid Polikabɔnɛt Shit Kɔt

Yu de luk fɔ wan rilibul sɔlid polikabɔnɛt shit manifakta , klia PC panɛl spɔlayt ɔ kɔstɔmayz UV-protɛkt polikabɔnɛt shit fɔ kɔnstrɔkshɔn ɔ industrial aplikeshɔn dɛn?

Send HSQY yu rikwayd tiknes, dimɛnshɔn, aplikeshɔn, kɔlɔ, UV rikwaymɛnt ɛn fabrication drɔin. Wi tim kin ɛp fɔ pik di rayt standad, ɛkstirian UV, anti-statik, anti-skrach ɔ ɔda sɔlid PC sheet ɛn gi sampul ɛn faktri prayz.