Plastik heat resistant PET sheet anti high temperatur

Hɛt-Resistant CPET Sheet fɔ Ovenable Fɔd Trey

HSQY de mek CPET shit ɛn rol dɛn we nɔ de ɔt fɔ ɔvin trey we dɛn mek wit tɛm, maykrowev it trey, aylayn it kɔntena, frɔzɛn rɛdi-mil pak, bekeri tre ɛn ɔda ay-tɛmpracha it-pak aplikeshɔn dɛn.

CPET tinap fɔ kristalin polyethylene terephthalate. We yu kɔmpia am wit standad amorphous PET, CPET gɛt kɔntrol kristalin strɔkchɔ we de impruv ɔt rɛsistɛns, rigiditi ɛn dimɛnshɔnal stebiliti we dɛn de kuk ɛn rihit.

Di HSQY gred we dɛn sho, dɛn mek am fɔ aplikeshɔn dɛn we nid tɛmpracha we go rich lɛk 350°F / 177°C ɔnda validet ɔt kɔndishɔn. Dɛn kin mek kɔstɔmayz CPET sistem fɔ brayt friza-to-ɔvin tɛmpracha rikwaymɛnt, we de ɔnda fɔmyulashɔn, kristaliniti, tiknɛs, trey dizayn, ɔt tɛm ɛn finish-pakɛj tɛst.

di tik we de fכm de kכmכt frכm lεk 0.12mm to 3mm. Rol wit frɔm lɛk 80mm to 1300mm ɛn standad ɔ kɔstɔmayz shit dimɛnshɔn dɛn de.

Blak ɛn wayt na di CPET kɔlɔ dɛn we kɔmɔn pas ɔl bikɔs kristal PET nɔmal wan na opaque ɔ translucent. Dɛn kin ebul fɔ evalyu ɔda kɔlɔ dɛn, tu kɔlɔ strɔkchɔ dɛn, risaykul-kɔntinɛnt opshɔn dɛn ɛn kɔstɔmayz sɔfays finish dɛn akɔdin to di fayn trey dizayn.

Faynal ɔvin ɛn maykrowev fit fɔ kɔnfyus yuz di finished thermoformed trey, aktual fud lod, lidding film, siling kondishɔn, ɔt ikwipmɛnt ɛn intended kuk saykl.

Rikwest CPET Shit Prayz    Rikwest Tɛmofɔmin Sampul dɛn

CPET Shit Vidio we nɔ de ɔt

Wach di fim we de dɔŋ fɔ lan mɔ bɔt HSQY CPET shit, ay-tɛmpracha it trey, tɛmɔfɔm aplikeshɔn ɛn kɔstɔmayt it-pak matirial.

Wetin Na CPET Shit we Nɔ De Ɔt?

CPET shit we nɔ de ɔt na kristalin polyɛsta shit we dɛn mek mɔ fɔ mek dɛn mek am insay trey ɛn kɔntena dɛn we fɔ telɛ friz, frij stɔrɔj, maykrowev rihit ɔ kɔvɛnshɔnal-ɔvin kuk.

Standart transparent APET na big wan amorphous. I de gi ay klia ɛn dɛn kin yuz am bɔku bɔku wan fɔ kol-fud trey, blista ɛn klamshɛl pak, bɔt i nɔmal fɔ sof ɔ distɔrj na tɛmpracha we CPET trey we dɛn mek fayn ɛn we dɛn dɔn kristaliz kin bia.

CPET gεt nyukliatin ejen dεm εn כda prכsεsin aditiv dεm we de εp fכ kכntrכl kristalizashכn di tεm we dεn de εkstrushכn εn tεmכfכm. di rizultant kristalin strכkchכ de impruv dimenshכnal stεbiliti pan εlevεt tεmprachכ.

Di fainal ɔt rɛsistɛns fɔ di trey dipen pan mɔ pas di nem CPET. I de inflɔws bay rɛsin gred, kristaliniti, kɔlɔ, wɔl tik, kaviti jɔyometri, mold tɛmpracha, rɛsidɛns tɛm ɛn ɔt kɔndishɔn.

Di wɔd dɛn we dɛn kɔl PET shit we nɔ de ɔt, PET shit we gɛt ay tɛmpracha, PET shit we yu kin ɔvin ɛn C-PET shit na dɛn dɛn kin yuz fɔ prɔdak dɛn we gɛt fɔ du wit am. Di wan dɛn we de bay fɔ kɔnfɔm se di matirial we dɛn de gi na validet CPET thermoforming gred pas ɔdinari APET ɔ PETG.

CPET Sheet Prodakt Imej dɛn

Hɛt-Resistant CPET Shit Spɛsifikeshɔn dɛn

Faynal tiknɛs tolɛreshɔn, wit, kristaliniti, kɔlɔ, sɔfays, ɔt rɛsistɛns, lɔw-tɛmpracha impak trɛnk ɛn it-kɔntakt rikwaymɛnt fɔ kɔnfɔm insay wan aprɔv rayt spɛsifikɛshɔn.

CPET Tɛmpratura Pɔfɔmɛnshɔn

Maksimal savis tɛmpracha nɔto wan yunivasal CPET valyu. I kin chenj wit di tɛm we di it de ɔt, di wet we di it de, di ɔyl we de insay, di trey jɔyometri, di tik we di wɔl tik, di kristaliniti ɛn if di tre de sɔpɔt wit ɔvin rɛk ɔ baking sheet.

CPET vs. APET, PETG ɛn PP

Aw CPET Shit De Bi Trey we Dɛn kin Ovenable

Raw-Material we dɛn kin yuz fɔ drɛy

PET na haygroskopik ɛn i fɔ drɛy am fayn bifo dɛn pul am. di mכsichכ we pasmak kin ridyus di mכlikul wet εn mek i brit, di sכfa difεkt כ inkכnsistεnt fכm pכrfomans.

Rɛsin Kɔmpawnd

PET resin de kam togɛda wit nyukliatin ɛjɛn, kɔlɔ masta batch, impak modifya ɛn ɔda aplikeshɔn-spɛsifi k aditiv dɛn.

Shit we dɛn kin yuz fɔ ɛkstrushɔn

Di matirial we dray de mɛlt, filta ɛn ɛkstrud am tru wan flat day fɔ prodyuz wan kɔntinyu CPET shit ɔ rol.

Tɛmofɔmin we dɛn kin yuz fɔ mek tin dɛn

Dɛn kin ɔt di shit bak ɛn fɔm am to mold we dɛn dɔn ɔt we dɛn de yuz vaykum, prɛshɔn ɔ plɔg ɛp.

Krystalization we dɛn kin kɔntrol

Mold tεmprachכ εn rεsidεns tεm de alaw di PET strכkchכ fכ kristaliz. Kɔrɛkt kristalizashɔn impɔtant fɔ dimɛnshɔnal stebiliti we dɛn de ɔt di ɔvin.

Kul ɛn Dimɔld

Dɛn kin kol di tre so dat i go kɔntinyu fɔ gɛt in shep ɛn afta dat dɛn kin pul am na di mold. Dɛn kin yuz silikon ɔ ɔda tritmɛnt fɔ rilis usay i fayn.

Trim ɛn Inspekshɔn

Fɔm trey dɛn de trim ɛn inspɛkt fɔ flɛnch flatnɛs, wɔl distribyushɔn, kristaliniti, kɔlɔ, kɔntaminɛshɔn ɛn dimɛnshɔnal akkuracy.

Ki Ficha dɛn fɔ Ɔt-Resistant CPET Shit

High-Temperature Dimɛnshɔnal Stebiliti we gɛt fɔ du wit am

CPET we dɛn dɔn kristaliz kɔrɛkt wan de kip in shep bɛtɛ pas amorphous PET we dɛn de ɔt am na ɔvin ɛn maykrowev.

Friza-to-Oven Kapabiliti

Aplikeshɔn-spɛsifi k CPET gred dɛn kin sɔpɔt frɔzɛn stɔrɔj ​​we dɛn kin fala dairekt maykrowev ɔ kɔvɛnshɔnal-ɔvin rihit we dɛn dɔn validet di kɔmplit pakej.

Rigiditi ɛn Lod Sɔpɔt

CPET de gi yusful stiffness fɔ ful it, bakery prodak ɛn ketɛn pat dɛn we dɛn de fil, sial, stak ɛn transpɔt.

Resistans to Ɔyl ɛn Fat

PET-based matirial dεm de gi yusful rεsistεns to plεnti כyl, fεt εn it asid. di fainal kompitibiliti dipכnt pan tεmprachכ, di tεm we di kכntakt de tek εn di it kכmכshכn.

Opshɔn dɛn fɔ Trey we dɛn kin sial wit ɔt

CPET trey dɛn kin sial wit kɔmpitabl pɔrmanent-wɛld, izi-pil, anti-fɔg ɔ ay-baria lid film dɛn.

Di Kɔstɔm Apiɛns

Blak, wayt, gold, silva, dual-kɔlɔ, mat, glos ɛn tɛkstɔr apinans dɛn kin evalyu fɔ difrɛn it brand ɛn makit dɛn.

Aplikeshɔn dɛn fɔ Hɛt-Resistant CPET Shit

Trey dɛn we dɛn kin yuz fɔ it we dɛn kin yuz fɔ it

Dɛn kin yuz CPET fɔ mek lasagna, pasta, rays it, kasrɔl, mit pat, vɛjitebul ɛn ɔda it dɛn we dɛn dɔn pripia we dɛn kin kuk ɔ ɔt bak na kɔmɔn ɔvin.

Maykrowev Meal Tray dɛn

Di sem trey kin divɛlɔp fɔ maykrowev rihit, we de ɔnda maykrowev pawa, it lod, vent ɛn ɔt-taym validɛshɔn.

Tray dɛn fɔ it tin dɛn na di aylayn

Dɛn kin mek di CPET shit dɛn we dɛn kin yuz fɔ mek it insay di aylayn it tre dɛn we fɔ tinap tranga wan fɔ ful-ɔp, kol ɔ friz, transpɔt, ɔt bak ɛn savis.

Frɔzɛn rɛdi it dɛn

Friza-grɛd CPET trey dɛn kin sɔpɔt kol-chen distribyushɔn ɛn dairekt rihit. Lɔw-tɛmpracha impak pefɔmɛns fɔ tɛst fɔ di fɔmyulashɔn ɛn trey dizayn we dɛn dɔn pik.

Bakery ɛn Desɛt Trey dɛn

Yu kin yuz CPET trey fɔ kek, pay, pastries, bred prodak ɛn bek-in-pak aplikeshɔn afta ɔyl, shuga, tɛmpracha ɛn kuk-saykl tɛst.

Instityushɔnal ɛn Ketin it dɛn

Di aplikeshɔn dɛn inklud ɔspitul, skul, kea fasiliti, soja ketɛning, ivent ketɛning ɛn sɛntral-kichin it sistɛm.

Meal-Kit ɛn Kuk-in-Pak Pakɛj

Di wan dɛn we de mek di it-kit kin yuz CPET trey fɔ di prɔdak dɛn we dɛn mek fɔ muf frɔm frij ɔ frɔzɛn distribyushɔn dairekt to kɔshɔma kuk ikwipmɛnt.

CPET Tray Aplikeshɔn Imej dɛn

CPET Tɛmofɔmin Rikwaymɛnt dɛn

Sheet Dray we dɛn de drɛy

Di tin dɛn we dɛn nid fɔ drɛy dipen pan di sheet-prɔdakshɔn ɛn thermoforming prɔses. di mכsichכ fכ kכntrol fכ mek i nכ brit εn di haydrolaytik dεgradashכn.

Profayl we de mek di ples wam

Di hita-zon sɛtin fɔ ajɔst akɔdin to di tik we di shit tik, di we aw di kristalizayshɔn de biev, di spid we di mashin de spid, di dip we di kaviti de ɛn di kɔndishɔn we di ples de.

Mold we dɛn dɔn ɔt

Wan mold we dɛn ɔt ɛn kɔntrol rɛsidɛns tɛm kin jɔs nid fɔ divɛlɔp di kristaliniti we nid fɔ wan CPET trey we dɛn kin ɔvɛn.

Plɔg Ɛp fɔ Plɔg

Plug-assisted forming kin impruv di wol distribushכn in dip caviti dεm εn ridyus di tכn we pasmak na di kכna εn sayd wכl dεm.

Di Rilis fɔ Mold

Mold dizayn, draft angle, kol ɛn sɔfayz tritmɛnt de afɛkt dimɔld. Dɛn kin ebul fɔ evaluate wan silikon-kɔt sheet usay rilis pefɔmɛns nid fɔ impɔtant.

Vɛrifikɛshɔn fɔ di Kristaliniti

Kristaliniti ɛn dimɛnshɔnal stebiliti fɔ kɔnfyus yuz di rayt tɛmal analisis, ɔvin tɛst ɔ ɔda aprɔv kwaliti-kɔntrol we.

Sial di CPET Trey dɛn

Wan CPET trey fɔ pe wit wan lidding film we de sial rili to di trey in flɛnch ɛn de kɔntinyu fɔ fayn fɔ di it we dɛn pak, di tɛmpracha fɔ kip am ɛn di we aw dɛn de ɔt am bak.

Di trey ɛn di liding film fɔ tɛst togɛda yuz di aktual siling tɛmpracha, prɛshɔn, tɛm fɔ de, di it kɔntaminɛshɔn lɛvɛl ɛn di ɔt prɔses.

Fɔd-Kɔntakt ɛn Ɔvin-Sefty Rikwaymɛnt

Wan sheet fɔ jɔs diskrayb as fud-kɔntakt we fit we di ɛksaktɔl rɛsin, aditiv, kɔlɔrant, risaykul kɔntinyu ɛn di we aw dɛn mek am, dɛn sɔpɔt am wit dɔkyumɛnt dɛn we de aplay to di makit we dɛn want fɔ mek.

Di wan dɛn we de bay fɔ sho di kɔntri usay dɛn de go, di kayn it, di ɔyl ɛn fat we de insay, di tɛmpracha we dɛn de kuk, di tɛm we dɛn fɔ kuk, di kɔndishɔn we dɛn go kɔntakt am dairekt wan ɛn if di tre go frɔz bifo dɛn ɔt am.

Kɔnvɛnshɔnal-ɔvin suitabiliti ɛn maykrowev suitabiliti na sɛpret pefɔmɛns klem. Dɛn fɔ chɛk dɛn ɔl tu fɔ di paket we dɔn dɔn.

ISO manejmɛnt-sistim sɛtifiket dɛn nɔ de pruv bay dɛnsɛf se ɛvri CPET fɔmyulashɔn na aprɔv fɔ it kɔntakt ɔ fɔ yuz ɔvin.

RoHS dɔkyumentri nɔto sɔbstityuyt fɔ fud-kɔntakt maykreshɔn tɛst ɔ diklareshɔn fɔ kɔmplians.

Medikal, Ɔtomotiv ɛn Indastrial Aplikeshɔn dɛn

Standart fud-pak CPET shit nɔ fɔ ɔtomɛtik promot fɔ mɛdikal, ɔtomotiv ɔ kemikal-prɔsesin aplikeshɔn.

Mɛdikal pak kin nid fɔ gɛt validet klin, sterilayz kɔmpatibiliti, traysabiliti, bayɔkompatibiliti-rilayt asɛsmɛnt ɛn spɛshal rigyuletɔri dɔkyumentri.

Ɔtomotiv ɛn industrial aplikeshɔn dɛn kin nid fɔ gɛt flammabiliti, ɔt-ɛj, kemikal-rɛsistɛns, dimɛnshɔnal ɛn mɛkanikal tɛst dɛn we difrɛn frɔm di tin dɛn we dɛn nid fɔ pak it.

Dɛn aplikeshɔn ya fɔ yuz wan sɛpret spɛsifiket ɛn tɛst injinɛri gred.

Risaykul CPET ɛn Sastaynabiliti

CPET na PET bays, bɔt di aktual risaykulbiliti dipen pan lokal trey-kɔlɛkshɔn sistɛm, sɔt tɛknɔlɔji, kɔlɔ, lɛbl, lid fim, it kɔntaminɛshɔn ɛn di kɔmplit paket dizayn.

Blak trey kin at fɔ sɔm optik sɔt sistɛm dɛn fɔ no. Dɛn kin ebul fɔ evaluate ɔda pigmɛnt dɛn, layt kɔlɔ ɔ blak fɔmyulashɔn dɛn we dɛn kin no akɔdin to wetin di makit nid.

Pɔst-kɔnsuma ɔ post-industrial risaykul PET kin inkɔrpɔret insay sɔm sɛlɛkɛt CPET strɔkchɔ usay di fɛnshɔnal dizayn ɛn aplikebul it-kɔntakt lɔ dɛn alaw am.

Klɛm dɛn lɛk risaykul, sɛkɔral, eko-friɛndli ɔ sataynabul fɔ sɔpɔt bay di ɛksaktɔ trey strɔkchɔ, dɛstineshɔn makit ɛn risaykul infrastukchɔ we de.

Rikɔmɛnd CPET Kwaliti-Kɔntrol Tɛst dɛn

• Raw-material, aditiv ɛn kɔlɔ-mastabatch verifyeshɔn.

• Mɔstɔ kɔntinyu bifo dɛn ɛkstrushɔn ɔ thermoforming.

• Shit tik ɛn tik tolɛreshɔn.

• Rol wit, rol dayamita, rol wet, kor ɛn wayndin dairekshɔn.

• Kɔlɔ, sɔfa, blak spat, jel ɛn kɔntaminɛshɔn.

• Densiti ɛn kristaliniti.

• Tɛmofɔmin tɛmpracha winda.

• Wall-tiknes ɛn kɔna-tiknɛs distribyushɔn.

• Tray dimɛnshɔn, flɛnch flatnɛs ɛn kaviti difinishɔn.

• Mold-rilis ɛn denest pefɔmɛns.

• Lɔw-tɛmpracha impak ɛn drɔp rɛsistɛns.

• Maykrowev itin ɛn hot-spɔt pefɔmɛns.

• Konvɛnshɔnal-ɔvin difɔmeshɔn ɛn lod tɛst.

• Ɔyl, fat, asid ɛn it-simulant rɛsistɛns.

• Sil trɛnk, lik, bɔrst ɛn peel pefɔmɛns.

• Maygrɛshɔn ɛn it-kɔntakt tɛst usay dɛn nid am.

• Finished-product kuk ɛn shelf-layf trayal dɛn.

Kastom CPET Shit Opshɔn dɛn

• Tiknes frɔm lɛk 0.12mm to 3mm.

• Rol wit frɔm lɛk 80mm to 1300mm.

• Masta rol, slit rol ɛn flat sheet.

• Blak, wayt, gold, silva ɛn kɔstɔmayt kɔlɔ dɛn.

• Single-kɔlɔ ɛn tu-kɔlɔ sheet strɔkchɔ dɛn.

• Glos, mat, ɛmbos ɛn tɛkstɔr sɔfays.

• Silikɔn-kɔt mold-rilis opshɔn dɛn.

• Virgin PET ɛn sɔm risaykul-PET strɔkchɔ dɛn we dɛn dɔn pik.

• Friza-to-ɔvin ɛn maykrowev trey gred dɛn.

• Weld-sial ɛn izi-pil trey strɔkchɔ dɛn.

• A4 sheet ɔ limited rol sɛmpul fɔ mashin trayal.

• Prayvet-lɛbul pak ɛn kɔstɔmayz ɛkspɔt palet.

Infɔmeshɔn we dɛn nid fɔ gɛt CPET Shit Kɔteshɔn

• Rikwayd sheet tik ɛn tolɛreshɔn.

• Rol wit, dayamita, wet ɛn kɔr saiz.

• Blak, wayt, gold, silva ɔ ɔda kɔlɔ.

• Glos, mat, tɛkstɔr ɔ silikon-kɔt sɔfays.

• Thermoforming-mashin brand ɛn mɔdel.

• Mold dimɛnshɔn, kaviti dip ɛn kɔna rayus.

• Single-compartment ɔ multi-compartment trey dizayn.

• Minimum tik we di wɔl ɛn kɔna gɛt.

• Fɔd we dɛn pak ɛn di wet we di it gɛt.

• Frɔzɛn, kol ɔ ambient stɔrɔj ​​kɔndishɔn.

• Maykrowev pawa ɛn ɛkspɛkt tɛm fɔ ɔt.

• Kɔnvɛnshɔnal-ɔvin tɛmpracha ɛn di tɛm we dɛn de kuk.

• Weld-sil, izi-pil ɔ ovenable lidding-film rikwaymɛnt.

• Virgin ɔ risaykul-kɔntinɛnt rikwaymɛnt.

• Target market ɛn rikwayd fud-kɔntakt dɔkyumentri.

• Trayal kwantiti, fɔs ɔda ɛn ɛni ia dimand.

• Destination port ɛn di de we dɛn nid fɔ sɛn am.

Send Yu CPET Shit Rikwaymɛnt dɛn

Pak ɛn Delivri

Sampul pak: Dɛn kin sial A4-sayz rigid CPET sheet ɔ kɔstɔmayz sɛmpul dɛn insay bag we de protɛkt dɛn ɛn pak dɛn insay katon.

Rol pak: Dɛn kin rap CPET rol dɛn wit protɛktiv fim ɛn kraft pepa ɛn tay dɛn pan plai wud palet.

Shit pak: Wan rɛfrɛns pakej wet na lɛk 30kg fɔ wan bag ɔ katon, we de ɔnda di dimɛnshɔn ɛn di we aw dɛn fɔ handle.

Palet pak: Na lɛk 500-2,000kg kin pak pan plai wud palet dipen pan di rol ɔ shit dimɛnshɔn.

Kɔntena lod: Rifrɛns lod na lɛk 20 tan, we de ɔnda di palet arenjmɛnt ɛn ligal wet ristrikshɔn.

Lid tɛm: Stɛndad prodakshɔn nɔmal fɔ tek lɛk 10-14 wok dez afta dɛn dɔn kɔnfyus di kɔlɔ, dimɛnshɔn, kwantiti, pak ɛn pe.

Sɛtifiket ɛn Kwaliti Dokumɛnt dɛn

HSQY kin gi prɔdak tɛst ripɔt dɛn we de, restricted-substance dɔkyumɛnt dɛn, fud-kɔntakt dɔkyumɛnt dɛn ɛn manejmɛnt-sistim sɛtifiket dɛn fɔ rivyu.

Di wan dɛn we de bay fɔ kɔnfɔm se ɛni dɔkyumɛnt kɔrɛkt to di ɛksaktɔl CPET rɛsin, aditiv, kɔlɔ, risaykul-kɔntinɛnt lɛvɛl, tik ɛn di we aw dɛn want fɔ yuz am.

Dɛn nɔ fɔ ɛksplen wan jenɛral sɛtifiket as pruf se dɛn dɔn gri fɔ ɛvri sheet fɔ ɛvri ɔvin tɛmpracha, maykrowev saykl, di kayn it ɔ di say we dɛn de go makɛt.

Wetin Mek Yu Pik HSQY as Yu CPET Shit Splaya?

HSQY Plastik Grup de saplae CPET sheet, CPET ovenable trey, siling film, PET thermoforming sheet, PET/PE laminated film ɛn ɔda fud-pak matirial to intanashɔnal manifakta ɛn distribyushɔn.

• CPET sheet we nɔ de ɔt fɔ ɔvin ɛn maykrowev trey.

• Tiknes frɔm lɛk 0.12mm to 3mm.

• Kastom rol wit, rol wet ɛn sheet dimɛnshɔn.

• Blak, wayt, gold, silva ɛn tu kɔlɔ opshɔn dɛn.

• Virgin ɛn sɔm risaykul-kɔntinɛnt strɔkchɔ dɛn we dɛn dɔn pik.

• Glos, mat, ɛmbos ɛn silikon-kɔt sɔfays.

• Sampul fɔ thermoforming ɛn oven-performance trials.

• Kompatibl silin-film ɛn trey-divɛlɔpmɛnt sɔpɔt.

• Fɔd-kɔntakt dɔkyumentri we de ɔnda di spɛsifikɛshɔn.

• Ekspɔt pak ɛn intanashɔnal-shiping sɔpɔt.

Bifo bɔlk prodakshɔn, HSQY rikɔmɛnd fɔ validet di sheet we dɛn dɔn pik yuz di kɔstɔma in aktual tɛmfɔmin mashin, ɔt mold, trey dizayn, it lod, siling film ɛn kuk saykl.

Ɛksplɔrɔ mɔ CPET sheet prodakt dɛn, CPET ovenable trey ɛn CPET trey sial film dɛn.

Kontakt HSQY fɔ Sampul ɛn Prayz

HSQY Globɛl Ɛgzibishin dɛn

HSQY de prezant CPET shit, ovenable fud trey, lidding film ɛn thermoforming pak sɔlvishɔn na intanashɔnal plastic ɛn fud-pak ɛgzibishin.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt CPET Shit we nɔ de ɔt

Wetin na CPET sheet we nɔ de wam?

Na kristalin PET-based sheet we dɛn mek fɔ thermoforming insay fud trey we nid impɔtant dimɛnshɔnal stebiliti we dɛn de ɔt maykrowev ɔ kɔvɛnshɔnal-ɔvin.

Wetin CPET tinap fɔ?

CPET tinap fɔ kristalin polyethylene terephthalate.

Wetin na di difrɛns bitwin CPET ɛn APET?

CPET gɛt ay kristalin strɔkchɔ ɛn dɛn dɔn divɛlɔp am fɔ ay-tɛmpracha trey dɛn. APET na men wan amorphous, highly transparent ɛn dɛn kin yuz am fɔ kol ɔ ambient pak.

Yu tink se CPET nɔmal fɔ transparent?

Standart hεli kristכlayz CPET na nכmal translucent כ opaque biכs di kristalin rijyכn dεm de skata layt. Blak ɛn wayt na di kɔlɔ dɛn we dɛn kin yuz mɔ.

Us tik tik dɛn de?

di tiknes rεnj we dεn list na lεk 0.12mm to 3mm. Faynal avaylabl dipen pan di wit, kala, rol saiz ɛn thermoforming rikwaymɛnt.

Us rol wit dɛn de?

Rol width frɔm lɛk 80mm to 1300mm de, we de ɔnda tik ɛn prodakshɔn kɔnfɔmeshɔn.

Us tɛmpracha di CPET gred we dɛn fichu kin bia?

Di gred we dɛn sho, dɛn mek am fɔ tɛmpracha we go rich lɛk 350°F / 177°C ɔnda validet kɔndishɔn dɛn. di ekzak limit dipכnt pan tεm, tik, kristכlin, trey jכmetri εn it lod.

CPET kin ebul fɔ bia wit 220°C?

Sɔm spɛshal CPET trey sistɛm dɛn we dɛn mek fɔ tɛmpracha we de nia 220°C, bɔt dɛn nɔ fɔ tek dis fɔ ɛvri sheet. Gret-spɛsifi k ɛn finish-trey tɛst nid fɔ de.

CPET trey kin go frɔm friza to ɔvin?

Aplikeshɔn-spɛsifi k CPET trey dɛn kin sɔpɔt friza-to-ɔvin yus afta lɔw-tɛmpracha impak, silin ɛn ɔvin-pɔfɔmɛnshɔn validɛshɔn.

CPET fayn fɔ maykrowev ɔt?

Yes, yu kin yuz fayn CPET trey fɔ maykrowev rihit. Dɛn fɔ tɛst maykrowev pawa, di tɛm we dɛn kin ɔt, di tin dɛn we dɛn mek fɔ it ɛn di say we dɛn kin pul di briz.

Yu tink se CPET fayn fɔ yuz kɔmɔn ɔvin?

Dɛn kin yuz CPET gred dɛn we dɛn kin yuz fɔ ɔvin na kɔvɛnshɔnal ɔvin dɛn insay dɛn validet tɛmpracha ɛn tɛm limit.

Yu kin yuz CPET ɔnda gril ɔ brɔyla?

Dairekt raytin ɔt frɔm gril ɔ brɔyla kin pas di validet trey tɛmpracha ɛn mek lokaliz ɔvahɛt. Nɔ tɔk se i fit fɔ gril ɔ brɔyla if yu nɔ du ɛni patikyula tɛst.

Yu tink se dɛn kin yuz CPET fɔ mek aylayn it trey dɛn?

Yɛs. Dɛn kin yuz CPET bɔku bɔku wan fɔ it di aylayn it dɛn we nid fɔ ful-ɔp, kol ɔ friz, transpɔt ɛn ɔt bak.

Yu tink se dɛn kin yuz CPET fɔ bek-in-pak prɔdak?

Dɛn kin yuz CPET trey dɛn we dɛn dɔn pik fɔ bek-in-pak aplikeshɔn afta dɛn dɔn tɛst di tɛmpracha, di tɛm we dɛn de kuk, di ɔyl we de insay, di shuga we de insay ɛn di lod we di prɔdak gɛt.

Yu tink se dɛn nid fɔ gɛt mold we dɛn dɔn ɔt fɔ mek dɛn ebul fɔ mek CPET thermoforming?

Wan hot mold ɛn kɔntrol rɛsidɛns tɛm na jɔs nid fɔ divɛlɔp di kristaliniti we nid fɔ ay-tɛmpracha pefɔmɛns.

Wetin mek CPET kin bi opaque?

di kristכl rijyכn dεm de skata layt we wi kin si, we kin mek di PET we rili kristכl de sho se i translucent כ opaque.

Yu tink se dɛn kin gi CPET sheet insay gold ɔ silva?

Yu kin ebul fɔ evalyu gold, silva ɛn ɔda kɔlɔ dɛn we dɛn dɔn kɔstɔmayt akɔdin to aw dɛn luk, di it-kɔntakt ɛn di ɔt-pɔfɔmɛnshɔn we dɛn nid.

Yu tink se dɛn kin mek CPET sheet we gɛt tu kɔlɔ?

dεn kin evaluate tu kכla strכkchכ dεm fכ gi wan kכla na di fכd-kכntakt sayd εn כda kכla na di εksternal sεf.

Us liding film de sial to CPET trey dɛn?

CPET trey dɛn nid fɔ gɛt liding film wit wan kɔmpitabl trey-sil layt. Permanent weld, izi-pil, anti-fog, ay-baria ɛn ovenable opshɔn dɛn de.

Yu tink se CPET it-kɔntakt sef?

Fɔd-kɔntakt fit fɔ di ɛksaktɔl rɛsin, aditiv, kɔlɔrant, risaykul kɔntinyu ɛn di tɛmpracha kɔndishɔn we dɛn bin want.

Yu tink se CPET kin risaykul?

CPET na PET bays, bɔt di aktual risaykulbiliti dipen pan lokal trey kɔlɛkshɔn, sɔt, kɔlɔ, lid film, lɛbl ɛn it kɔntaminɛshɔn.

Yu tink se dɛn kin yuz PET we dɛn dɔn risaykul na CPET sheet?

Di CPET strɔkchɔ dɛn we dɛn dɔn pik kin inklud risaykul PET usay fud-kɔntakt lɔ dɛn, fɛnshɔnal barɛri ɛn ɔt-pɔfɔmɛnshɔn rikwaymɛnt dɛn alaw am.

CPET kin pwɛl ɔ i kin kɔmpɔst?

Standart CPET nɔto bayɔdigradabl ɔ kɔmpɔstabl. Dɛn nɔ fɔ yuz dɛn klem ya if dɛn nɔ gɛt sɛtifiket fɔ di tin dɛn we dɛn de tɔk bɔt.

Wetin na di standad MOQ?

Di standad MOQ na aprɔksimatli 1,000kg. Speshal kɔlɔ, tu kɔlɔ strɔkchɔ ɛn tik we nɔ kɔmɔn kin nid difrɛn minim kwantiti.

Yu tink se CPET sheet sampul dɛn de?

A4 shit, kɔstɔm pis ɔ limited rol sɛmpul kin de fɔ chɛk kɔlɔ, tik, tɛmfɔmin, kristalizashɔn ɛn ɔt pefɔmɛns. Nɔmal wan na di pɔsin we bay di tin kin pe fɔ di freyt we dɛn kin kɛr go.

Wetin na di prodakshɔn lida tɛm?

Standart prodakshɔn nɔmal fɔ tek lɛk 10-14 wok dez afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, kɔlɔ, kwantiti, pak ɛn pe.

Us infɔmeshɔn dɛn nid fɔ kot?

Gi di tik, rol wit, kɔlɔ, tɛmɔfɔm mashin, trey dimɛnshɔn, it lod, stɔrɔj ​​tɛmpracha, ɔvin tɛmpracha, kuk tɛm, lidding film ɛn kwantiti we dɛn nid.

Gɛt wan Kastɔm ​​CPET Shit Kɔt

Bɔt HSQY Plastik Grup

Changzhou Huisu Qinye Plastic Group Co., Ltd. de saplae CPET shit we nɔ de wam, CPET ɔvin tre, silin film, PET shit ɛn kɔstɔmayz it-pak prodak to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt thermoforming kɔmni dɛn, rɛdi-mil manifakta dɛn, aylayn-kɛtin saplay dɛn, fud-pak kɔnvɔta dɛn, impɔta ɛn distribyushɔn wit matirial sɛlɛkshɔn, sampul tɛst, kɔstɔmayz prodakshɔn, tɛknikal dɔkyumentri ɛn ɛkspɔt delivri.

Rikwest fɔ Kot ɛn Sampul

ChangZhou HuiSu QinYe Plastik Grup bin establish pas 16 ia, wit 8 plant fɔ gi ɔl kayn Plastik prodak, inklud PVC RIGID KLIR SHEET,PVC FLEXIBLE FILM, PVC GRAY BƆD, PVC FƆM BƆD, PET SHEET, AKRILIK SHEET. Widely yuz fɔ Package, Sayn,D ecoration ɛn ɔda eria dɛn. 

 

Wi kɔnsɛpt fɔ tink bɔt ɔl tu kwaliti ɛn savis ikwal impɔtant ɛn pefɔmɛns de gɛt trɔst frɔm kɔstɔma dɛn, na dat mek wi dɔn establish gud kɔpɔreshɔn wit wi klaynt dɛn frɔm Spen, Itali, Ɔstria, Pɔtyuga, Jamani, Gris, Polan, Ingland, Amɛrika, Sawt Amɛrika, India, Tayland, Malezya ɛn so ɔda wan dɛn.

 

We yu pik HSQY, yu go gɛt di trɛnk ɛn stebiliti. Wi de mek di industri in bɔku bɔku prɔdak dɛn ɛn kɔntinyu fɔ divɛlɔp nyu teknɔlɔji dɛn, fɔmyulashɔn ɛn sɔlvishɔn dɛn. Wi reputeshɔn fɔ kwaliti, kastoma savis ɛn tɛknikal sɔpɔt nɔ pas ɛni ɔda tin na di industri. Wi de kɔntinyu fɔ tray fɔ advays sastaynabiliti prɔsis na di makit dɛn we wi de sav.