16mm 18mm 20mm PVC Seluka Bod fɔ Fɛnichɔ

HSQY 16mm, 18mm ɛn 20mm PVC Celuka bod na wan rigid, laytwɛt fɔnicha panɛl wit wan smol dens sɔfays ɛn fom PVC kɔr fɔ kabinɛt, wodrɔb, shelf, patishɔn, fɔnicha panɛl ɛn ɔda fabricated intɛriɔ kɔmpɔnɛnt dɛn.

Dɛn tri tiknes ya rili impɔtant to fɔnicha ɛn kabinɛt manufakchurin usay dɛn fɔ tink bɔt panɛl rigiditi, mashin, skru fiks, hinj instɔleshɔn ɛn finish sɔfays kwaliti togɛda.

Fɔ bɔku ɔda, di wan dɛn we de bay fɔ spɛsifa di 16mm, 18mm ɔ 20mm tiknes we dɛn nid, density, sheet matirial saiz, panɛl aplikeshɔn, CNC rikwaymɛnt, hadwae, span we nɔ sɔpɔt, sɔfayz finish ɛn di lod we dɛn de ɛkspɛkt bifo dɛn prodyuz.

PVC Celuka Bod Vidio

PVC Celuka Fɛnichɔ Bɔd Imej dɛn

PVC Celuka Bɔd Spɛsifikeshɔn dɛn

Dis pej de tɔk mɔ bɔt 16mm, 18mm ɛn 20mm fɔnicha bod dɛn. Di wayda HSQY PVC fom-bod famili inklud כda tiknes dεm bak. Faynal avaylabl, density ɛn surface spesifikeshɔn fɔ kɔnfyus fɔ di ɛksaktɔ Celuka gred we dɛn de bay.

Wetin Na PVC Sɛluka Bɔd?

PVC Seluka bod na rigid εkspεnd PVC sheet matirial we dεn prodyuz wit wan dense, smol כta skin εn wan laytwεt fכm intanεt strכkchכ.

Di denser surface na yusful fɔ furniture ɛn kabinet fabrication usay mashin kwaliti, finished apinans, skru fixing, peint ɔ decorative lamination kin impɔtant.

Di ekzak density ɛn di surface characteristics kin difrɛn akɔdin to di prodakshɔn gred we dɛn pik. Di wan dɛn we de bay fɔ spɛsifa di fɔnicha kɔmpɔnɛnt we dɛn nid ɛn di we aw dɛn de prosɛs am bifo dɛn kɔnfɔm di bɔd spɛsifikɛshɔn.

Wetin Mek Yu Yuz PVC Sɛluka Bɔd fɔ Fɛnichɔ?

Fɔ mek fɔnicha nɔ jɔs nid fɔ mek di say we smol smol. Panɛl dɛn kin nid bak fɔ kɔt, rout, drɔ, skru, lamin, peint ɔ kɔnɛkt wit kabinɛt hadwɔd.

Celuka bod na spɛshal tin we rili impɔtant to fɔnicha bikɔs in dense skin ɛn fom kɔr de gi wan kɔmbaynshɔn fɔ rigid panɛl kɔnstrɔkshɔn, wet we pɔsin kin manej ɛn we pɔsin kin yuz mashin.

Faynal pefɔmans dipen pan di bod tik, density, panɛl span, hadwae, mashin ɛn lod. Dɛn fɔ rivyu dɛn tin ya togɛda pas fɔ pik fɔnicha bɔd jɔs bay nominal tik.

16mm vs 18mm vs 20mm PVC Seluka Bod

Dis na prɛktikal sɛlɛkshɔn dairekshɔn pas fiks lod rɛytin. Di kɔrɛkt tiknɛs fɔ kɔnfɔm akɔdin to di density, fayn dimɛnshɔn, sɔpɔt kɔndishɔn ɛn hadwae dizayn.

18mm PVC Celuka Bod fɔ Kabinɛt dɛn

18mm na patikyula tin we rili impɔtant to kabinɛt ɛn fɔnicha prɔjek usay dɛn nid bɔku panɛl tik fɔ kabinɛt bɔdi, domɔt, shelf, wodrɔb ɛn stɔrɔj ​​sistɛm.

Bɔt tu 18mm bod dɛn we gɛt difrɛn density kin biev difrɛn we we dɛn de yuz mashin ɛn instɔleshɔn fɔ di hadwɔd. Fɔ ripit kabinɛt prodakshɔn, inklud ɔl tu di tik ɛn density insay di aprɔv bay bay spɛsifikɛshɔn.

16mm PVC Celuka Bod fɔ Fɛnichɔ Panɛl dɛn

16mm bod kin evalyu usay fɔnicha manifakta dɛn nid wan sɔbstanshal panɛl we dɛn de ridyus matirial volyum kɔmpia wit wan kɔmparabl 18mm ɔ 20mm sheet matirial .

Tipik dairekshɔn dɛn inklud kabinɛt bɔdi kɔmpɔnɛnt dɛn, patishɔn dɛn, wodrɔb panɛl dɛn, sayd panɛl dɛn ɛn ɔda fɔnicha pat dɛn usay di dizayn sɔpɔt di tik we dɛn dɔn pik.

20mm PVC Celuka Bod fɔ Tik Fɛnichɔ Panɛl dɛn

20mm bod de gi big ɔvala panɛl dip ɛn dɛn kin evalyu am fɔ tik fɔnicha panɛl, shelvin sistɛm, displei fɔnicha ɛn fabricated kɔmpɔnɛnt usay dɛn nid fɔ gɛt mɔ sɔbstanshal sɛkshɔn.

Bod we tik pasmak nɔ kin fayn fɔ ɛni wok we gɛt ebi ebi lod. span we nɔ sɔpɔt, di bod dɛnsiti, riinfɔsmɛnt, we fɔ fiks ɛn lod we dɛn de ɛkspɛkt stil nid fɔ tink bɔt.

PVC Celuka Bod fɔ Kichin Kabinɛt dɛn

16mm, 18mm ɛn 20mm Celuka bod dɛn kin evalyu fɔ kichin kabinɛt bɔdi, sayd panɛl, patishɔn, domɔt ɛn shelf dɛn dipen pan di kabinɛt dizayn.

Fɔ kichin prɔjek, gi hinj ples, drɔwa-slayd pozishɔn, shelf span, ɛkspɛkt lod, aplayans kliarens ɛn ed-finish rikwaymɛnt so dat dɛn go ebul fɔ rivyu di aprɔpriet tik ɛn density.

PVC Celuka Bod fɔ Bathrum Kabinɛt dɛn

Bathroom ɛn washroom kabinɛt dɛn de pan di fɔs aplikeshɔn dɛn. Di kɔrɛnt fizik-prɔpati data de list wata absɔpshɔn na ≤1.5%, we de mek mɔstɔ pefɔmɛns bi impɔtant matirial-sɛlekshɔn faktɔ.

Finished batrum furniture pefomans tu dipen pan skru, hinj, drɔl ol, jɔyn, adeziv ɛn instɔleshɔn. Yu fɔ avɔyd fɔ tinap wata rawnd di jɔyn ɛn hadwɔd.

PVC Celuka Bod fɔ Wodrɔb ɛn Stɔrej Fɛnichɔ

Celuka bod kin mek am insay wodrɔb sayd panɛl, patishɔn, shelf, domɔt ɛn stɔrɔj-sistim kɔmpɔnɛnt usay dɛn nid fɔ gɛt rigid PVC panɛl ɛn smol finish sɔfays.

Fɔ lɔng wodrɔb panɛl ɛn lɔng shelf, spɛsifa finish dimɛnshɔn, sɔpɔt pɔynt ɛn ɛkspɛkt lod bikɔs panɛl span kin impɔtant lɛk nominal tik.

Shelf Tiknɛs ɛn Span we Nɔ Sɔpɔt

Shelf pefɔmans dipen pan tik, density, unsupported span, lod ɛn sɔpɔt arenjmɛnt. If yu tik mɔ, dat kin mek di panɛl dip ɛn rigiditi bɛtɛ, bɔt i nɔ de pul di nid fɔ evalyu di rial shelf dizayn.

Fɔ shelf dɛn we gɛt bɔku lod ɔ lɔng, tɛst di 16mm, 18mm ɔ 20mm bod we yu dɔn pik wit di span ɛn sɔpɔt kɔnfigyushɔn we yu want. Sɔntɛm dɛn nid ɔda sɔpɔt ɔ riinfɔsmɛnt.

Wetin Mek Density Impɔtant fɔ Fɛnichɔ Panɛl dɛn

di kכrant prodakt infכmeshכn de list wan wayd dεnsiti rεnj fכ 0.35–1.0g/cm³. Densiti de afɛkt di bod wet, rigiditi, mashin bihayvya ɛn fasten pefɔmɛns.

Fɔ prodakshɔn fɔnicha, ripit ɔda fɔ rɛfrɛns di tik ɛn density we dɛn gri pas fɔ rifer to tiknes nɔmɔ.

Skru Holding, Hinj ɛn Fɛnichɔ Hadwɔd

PVC fom bod kin dril, skru, nel en mekanik fasten akɔdin to di sɔs prodak infɔmeshɔn.

Aktual skru ɛn hinj pefɔmɛns dipen pan bod tik, dɛnsiti, skru jɔyometri, payɔt-ol dimɛnshɔn, insayshɔn dip, edj distans ɛn aplay lod.

Fɔ kabinɛt domɔt, hinj, drɔwa slayd ɛn hadwae we dɛn kin lod bɔku tɛm, validet di ɛksaktɔl bod-ɛn-fastena kɔmbayn bifo bɔku prodakshɔn.

CNC Routing, Kɔt ɛn Drilin

PVC Dɛn kin kɔt, drɔl, panch, sand ɛn mek am wit mashin we dɛn mek wit mashin. Di dense ɔta skin de mek i rili impɔtant bak to CNC-routed furniture components usay edj kwaliti ɛn prɔsesin stebiliti impɔtant.

Fɔ prɛfabriket fɔnicha pat, gi finish dimɛnshɔn, routin dip, grov, drɔlin pozishɔn, hinj ol ɛn tolɛreshɔn. Di mashin sɛtin dɛn fɔ mach to di rial tik ɛn density.

Edj Mashin ɛn Finishin

Kכt εn routin de εkspכz di intanεt fכm PVC strכkchכ na di ed. So dɛn fɔ plan di ed dɛn we pɔsin kin si fɔ di fɔnicha akɔdin to di las apinɛns we dɛn nid.

Usay dɛn nid fɔ bandej edj, peint ɔ ɔda edj tritmɛnt, kɔnfɔm di we aw dɛn de finish ɛn di matirial kɔmpatibiliti yuz di aktual Celuka bod bifo dɛn prodyuz.

Peint ɛn Dekorativ Laminɛshɔn

Di smol smol Celuka surface kin bi evaluate fo kompitibl peint sistem en dekorativ film dem we dem yuz fo furniture en kabinet prodakshon.

Sɔfayz pripiamɛnt, adhesive kemistri, prɔsesin tɛmpracha, prɛshɔn ɛn kɔrɛkt kɔndishɔn fɔ tɛst wit di prodakshɔn gred we dɛn dɔn pik bifo big-volyum manufakchurin.

Glossy ɛn Matt Surface Opshɔn dɛn

Usay di surface appearance impɔtant, apruv wan ripɔt prodakshɔn sampul bifo yu put ripit ɔda.

Standart ɛn Big Shit Sayz dɛn

Di prɔdak infɔmeshɔn we de naw de sho 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm ɛn 2050 × 3050mm fɔmat dɛn, wit kɔstɔmayshɔn we dɛn dɔn list bak.

1220 × 2440mm fayn fɔ kɔmɔn fɔnicha ɛn kabinɛt prodakshɔn, we big 1560 × 3050mm ɛn 2050 × 3050mm sheet matirial s kin ridyus jɔyn ɔ impɔtant kɔt yield fɔ ɔvasayz fɔnicha kɔmpɔnɛnt dɛn.

Bifo yu pik big-fɔmat panɛl dɛn, kɔnfɔm CNC-bed dimɛnshɔn, hanlin ikwipmɛnt, stɔrɔj ​​rɛk, palet rikwaymɛnt ɛn finish-pat nɛst.

Rifrɛns Fizik Prɔpati dɛn

Dɛn kip di valyu dɛn we de dɔŋ ya frɔm di ɔrijinal prɔdak infɔmeshɔn. Dɛn fɔ trit dɛn as rɛfrɛns data fɔ di prɔdak rɛnj we de na di list pas dɛn kɔnfyus fɔ di ɛksaktɔ 16mm, 18mm ɔ 20mm dɛnsiti ɛn gred we dɛn de bay.

Mɔstɔ Resistɛns

Di sɔs data list wata absɔpshɔn na ≤1.5%, we mek mɔstɔ pefɔmɛns rili impɔtant to kichin kabinɛt, batrum kabinɛt ɛn ɔda fayn fayn fɔnicha aplikeshɔn dɛn.

Di kɔmplit fɔnicha sistɛm fɔ stil evalyu as a ɔl bikɔs hinj, skru, adeziv, jɔyn ɛn ɔda matirial dɛn kin gɛt difrɛn mɔstɔ limiteshɔn.

Hɛt Kɔnsidɛreshɔn fɔ Fɛnichɔ ɛn Kabinɛt

Di listed Vicat softin poynt na 73–76°C. Fɛnichɔ ɔ kabinɛt panɛl dɛn we dɛn dɔn instɔl nia ɔvin, kuktɔp ɔ ɔda tin dɛn we de mek ɔt fɔ fala di rilevɛns ikwipmɛnt kliarens ɛn insuleshɔn we dɛn nid.

Nɔ put di bod dairekt agens wan ay-tɛmpracha sɔfays we nɔ gɛt insulin pas dɛn dɔn validet di kɔmplit asɛmbli fɔ da opareshɔn kɔndishɔn de.

Faya Pɔfɔmɛnshɔn

Di ɔrijinal prodak data de list di we aw pɔsin de biev we i de kil insɛf insay lɛs pas fayv sɛkɔn.

If fɔnicha ɔ intɛriɔ prɔjek nid fɔ gɛt wan patikyula faya klasification, flame-spread value, smok rikwaymɛnt ɔ rɛgyulatɛd standad, aks fɔ di aplikebul tɛst dɔkyumentri fɔ di ɛksaktɔl bɔd gred we dɛn de saplae.

Fɛnichɔ ɛn Kabinɛt Aplikeshɔn dɛn

Fɔnicha Aplikeshɔn Imej dɛn

Aw fɔ Spɛsifik PVC Sɛluka Bɔd fɔ Fɛnichɔ

PVC fom bod SGS Data Shit

Di ɔrijinal pej de gi di fɔs PVC fom bod SGS data sheet matirial . Kɔnfɛm se di dɔkyumɛnt de aplay to di ɛksaktɔ 16mm, 18mm ɔ 20mm Celuka gred ɛn density we dɛn nid fɔ di prɔjek.

Pak ɛn Deliv

Sampul Pakɛj: Di sɔs infɔmeshɔn de sho A4-sayz bod dɛn we dɛn pak insay plastic bag ɔ katon.

Bulk Packing: Dɛn dɔn put plastic bag, katon ɛn kraft pepa fɔ pak bɔku bɔku bod.

Palet Palet: Di ɔrijinal pej de list lɛk 500–2000kg pan wan plai wud palet.

Kɔntinɛnt Lod: Di sɔs de list lɛk 20 tan pan ɛni kɔntena. Aktual lod fɔ kɔnfyus akɔdin to tik, dɛnsiti, sheet matirial saiz ɛn palet kɔnfigyushɔn.

Dilivri Tɛm: EXW, FOB, CNF ɛn DDU de na di list.

Lid Taym: Di sɔs we de naw de list lɛk 15–20 dez fɔ 1–20,000kg ɛn di tɛm we dɛn kin tɔk bɔt fɔ big ɔda. Kɔnfɛm di prodakshɔn schedule we de naw wit di kot.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt PVC Celuka Furniture Board

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae PVC Celuka fom bod ɛn ɔda plastic sheet matirial matirial to fɔnicha manifakta, kabinɛt faktri, distribyushɔn, intɛriɔ fabricatɔ ɛn industrial bayer.

Fɔ 16mm, 18mm ɛn 20mm fɔnicha-bɔd projɛkt, gi di density we dɛn nid, sheet matirial dimɛnshɔn, fɔnicha kɔmpɔnɛnt, CNC drɔin, hadwae spɛsifikɛshɔn, finish prɔses, kwantiti ɛn dɛstineshɔn so di aprɔpriet bod kɔnfigyushɔn kin rivyu.

HSQY Kwalifayeshɔn ɛn Ɛgzibishin Infɔmeshɔn