HSQY 2–30mm ko-ɛkstrud PVC fom bod kɔba denser PVC sɔfa layers wit wan laytwɛt fom PVC kɔr fɔ kabinɛt, fɔnicha, intɛriɔ panɛl, displei, CNC fabrikeshɔn ɛn ɔda prɔfɛshɔnal panɛl aplikeshɔn dɛn.
Di brayt 2–30mm tiknes rɛnj alaw bayer fɔ pik tin sheet matirial s fɔ sɔpɔt panɛl ɛn displei kɔmpɔnɛnt, midul tiknes fɔ patishɔn ɛn fɔnicha pat, ɛn tik bod fɔ kabinɛt, shelf ɛn fabricated kɔmpɔnɛnt dɛn we nid big panɛl dip.
Fɔ ripit B2B bay, spɛsifa tiknes, density, sheet matirial dimɛnshɔn, kɔ-ɛkstrud sɔfa strɔkchɔ, kɔlɔ, glos lɛvɛl, CNC prɔsesin, hadwae, edj tritmɛnt ɛn finish aplikeshɔn pas fɔ bay bay tiknes nɔmɔ.
Ko-Ekstrud PVC fom bod Vidio
Ko-Ekstrud PVC fom bod Imej dɛn
![2-30mm ko-ekstrud PVC fom bod]( "2-30mm Co-Extruded PVC Foam Board")
2–30mm Ko-Ekstrud PVC fom bod
![PVC ko-ekstrushɔn fom bod fɔ fɔnicha kabinɛt ɛn fɔ mek]( "PVC Co-Extrusion Foam Board")
PVC Ko-Ekstrushɔn Fom Bɔd
2–30mm Ko-Ekstrud PVC fom bod Spɛsifikeshɔn dɛn
Dis prodak pej de fos pan ko-ekstrud PVC fom bod frɔm 2mm to 30mm. Di orijinal ditayl HSQY prodak-famili tebul de list bak wan wayda 1–35mm rεfrεns rεnj. Fainal avaylabl so fɔ kɔnfyus akɔdin to di bɔd strɔkchɔ, dɛnsiti, sheet matirial saiz ɛn sɔfayz rikwaymɛnt.
| Prɔpati |
Spɛsifikeshɔn |
| Di Prodak Nem |
2–30mm Ko-Ekstrud PVC fom bod |
| Tin dɛn |
PVC |
| Fichured Tiknɛs Rɛnj |
2–30mm na di wan |
| Broda Prodakt-Famili Rifrɛns |
1–35mm, ɛn di ɔda wan dɛn; kכnfכm avεlayblεti fכ di rikwayd kכ-εkstrud strכkchכ |
| Densiti Rɛnj |
0,35–1,0g/cm⊃3, ɛn di ɔda wan dɛn; |
| Standart Sayz |
1220 × 2440mm / Na lɛk 4×8 ft |
| Ɔda Sayz dɛn we dɛn dɔn list |
915 × 1830mm, 1560 × 3050mm, 2050 × 3050mm |
| Kɔlɔ dɛn |
Wait, Rɛd, Yɔlɔ, Blu, Grin, Blak ɛn Ɔda Opshɔn dɛn |
| Sho |
Glossy, Matte, ɛn ɔda pipul dɛn |
| Men Aplikeshɔn dɛn |
Fɛnichɔ, Kabinɛt, Intɛriɔ Panɛl, Displei, Advatayzmɛnt, Printin ɛn Fabrikɛshɔn |
| Di we aw dɛn de du di wok |
Saw Kɔt, CNC Routin, Drlin, Engravin, Panch, Sandin, Skru, Nɛl, Rivɛt ɛn Bɔnd |
| MOQ we gɛt fɔ du wit am |
3 Tan dɛn |
| Kwaliti Kɔntrol |
Raw Matirial Sɛlɛkshɔn, Prodakshɔn Prɔses Monitorin ɛn Pis-bay-Pis Chɛk List |
| Di we aw dɛn de pak di tin dɛn |
Plastik Bag, Katon, Palet ɛn Kraft Pepa |
| Pe |
T/T, L/C, D/P, Wɛstɛn Yuniɔn |
| Listed Lid Taym |
lεk 15–20 Dez Afta dεn dכn dipכsit; Kɔnfɔm Kɔrɛnt Skedul wit Kɔt |
| Sampul dɛn |
Fri Sampul dɛn we Dɛn List As Dɛn De; Kɔnfɛm Spɛsifikeshɔn ɛn Ɛkspɛs Freyt Arenjmɛnt |
Wetin Na Kɔ-Ɛkstrud PVC fom bod ?
Ko-ekstrud PVC fom bod na wan εkspεnd rigid PVC panεl wit laytwεt fכm kכr εn dens PVC sכfayz layεr dεm we fכm di tεm we di εkstrushכn prכsεs de.
di kכ-εkstrud sεf dεm de gi wan mכr finish כta layεr we di sεlyul kכr de ridyus di bכd wet. Dis kɔmbaynshɔn de mek di matirial rili impɔtant to fɔnicha, kabinɛt, intɛriɔ dɛkɔreshɔn, displei fabrikeshɔn ɛn CNC-prɔsɛs kɔmpɔnɛnt dɛn.
Di ekzak surface-layer arenjmɛnt, density ɛn finish kin difrɛn bay gred. Di wan dɛn we de bay fɔ kɔnfɔm if wan ɔ ɔl tu di say dɛn nid fɔ gɛt wan say we dɛn dɔn dɔn ɛn if di skin ɛn di kɔr kɔlɔ dɛn nid fɔ mach.
Aw fɔ Pik PVC fom bod Tiknɛs
Wan 2–30mm rεnj de kכba aplikεshכn dεm wit vεri difrεnt panεl rikwaymεnt dεm. Tin sheet matirial s prayoritayz lɔwa matirial wet, we tik bod dɛn de gi big panɛl dip ɛn i kin bi mɔ aprɔpriet fɔ fɔnicha, shelf ɛn kabinɛt kɔmpɔnɛnt dɛn dipen pan dɛnsiti ɛn sɔpɔt.
| Tiknes Dairekshɔn |
Jɛnɛral Aplikeshɔn Dairekshɔn |
Wetin Baya dɛn Fɔ Kɔnfɛm |
| 2–5mm na di wan |
Sɔpɔt panɛl, sayn, displei sɔfays, wɔl layn ɛn laytwɛt fabricated kɔmpɔnɛnt dɛn |
Flatness, sɔpɔt, mawntin, handel ɛn finish panɛl dimɛnshɔn dɛn |
| 6–10mm na di wan |
Displei, patishɔn, kabinɛt bak, divayda ɛn midul-duti intɛriɔ panɛl dɛn |
Density, span, fastening we ɛn CNC rikwaymɛnt dɛn |
| 11–15mm na di wɔl |
Fɛnichɔ kɔmpɔnɛnt dɛn, patishɔn dɛn, CNC pat dɛn ɛn sɛlɛkɛt kabinɛt kɔmpɔnɛnt dɛn |
Rigiditi, density, hadwae pozishɔn ɛn span we nɔ sɔpɔt |
| 16–20mm na di wɔl |
Kabinɛt bɔdi, fɔnicha panɛl, shelf, domɔt ɛn bɔku bɔku pat dɛn we dɛn mek |
Hinj, skru, shelf lod, density ɛn sɔpɔt strɔkchɔ |
| 21–30mm na di wɔl |
Tik fɔnicha panɛl dɛn, displei strɔkchɔ dɛn, pat dɛn we dɛn dɔn rout ɛn aplikeshɔn dɛn we nid fɔ gɛt mɔ panɛl dip |
Weyt, mashin dip, rigiditi, finish dimɛnshɔn ɛn aktual lod |
Dɛn tiknɛs dairekshɔn ya na prɛktikal statin pɔynt dɛn pas fiks strɔkchɔral rɛytin. Faynal sɛlɛkshɔn fɔ tink bɔt density, surface kɔnstrɔkshɔn, panɛl dimɛnshɔn, hadwae, lod ɛn sɔpɔt.
Wetin Mek Density Impɔtant wit Tiknɛs
di sos prodakt infכmeshכn de list wan dεnsiti rεnj fכ 0.35–1.0g/cm³. Tik ɛn dens fɔ spɛsifa togɛda bikɔs tu bod dɛn we gɛt di sem tik kin difrɛn pan wet, rigiditi, mashin bihayvya ɛn fastɛns pefɔmɛns.
| Density Direction |
Jɛnɛral Pɔchɛshɔn Kɔnsidɛreshɔn |
| Di Density we de dɔŋ |
Ridyus panɛl wet ɛn i kin fit laytwɛt sɔpɔt aplikeshɔn dɛn |
| Midul Densiti we dɛn kɔl |
Balans wet, rigiditi ɛn jenɛral fabrication rikwaymɛnt |
| Di Densiti we Ay pas ɔl |
Kin gi inkris rigiditi ɛn sɔpɔt mɔ dimand CNC ɔ fastenin aplikeshɔn dɛn dipen pan di kɔmplit bɔd strɔkchɔ |
Fɔ ripit ɔda, inklud ɔl tu di nominal tik ɛn agreed density insay di bay spesifikeshɔn.
Ko-Ekstrud Surface ɛn Fom Kɔr
| Bod Sɛkshɔn |
Fɔnkshɔn |
Pɔchɛshɔn Kɔnsidɛreshɔn |
| Ko-Ekstrud Surface Layer we dɛn kin yuz |
I de gi wan smol finish surface rawnd di fom kɔnstrɔkshɔn |
Kɔnfɛm glos, kɔlɔ, visible-fes rikwaymɛnt ɛn daunstrim finish |
| Fomed PVC Kɔr |
I de gi bod tik we i de ɛp fɔ ridyus panɛl wet |
Konfam density, rigiditi, mashin ɛn hadwae rikwaymɛnt |
| Rivas Sɔfays |
Kin gi ɔda say we dɔn dɔn akɔdin to di kɔnstrɔkshɔn we yu dɔn pik |
Kɔnfɛm if wan ɔ ɔl tu di fes dɛn nid di sem sɔfays spɛsifikɛshɔn |
PVC Ko-Ekstrud Bod fɔ Kichin Kabinɛt
Kɔ-ɛkstrud PVC fom bod kin evalyu fɔ kichin kabinɛt bɔdi, sayd panɛl, patishɔn, domɔt, shelf ɛn ɔda fɔnicha kɔmpɔnɛnt dɛn usay wan smol finish PVC sɔfays ɛn lɔw wata absɔpshɔn na yusful.
Di wan dɛn we de mek kabinɛt fɔ no di rial kɔmpɔnɛnt bifo dɛn pik di tik. Kabinɛt bak ɛn divayda dɛn jɔs de put difrɛn dimand pan di matirial pas kabinɛt domɔt, shelf ɔ panɛl dɛn we de kɛr hinj ɛn drɔwa hadwae.
Fɔ hadwae-intensif kabinɛt kɔmpɔnɛnt dɛn, kɔnfɔm bod dɛnsiti, tiknɛs, hinj dizayn, skru jɔyometri, payɔt ol, edj distans ɛn ɛkspɛkt lod yuz prodakshɔn sɛmpul dɛn.
PVC Ko-Ekstrud Bod fɔ Bathrum Kabinɛt
Bathroom kabinet ɛn vaniti kɔmpɔnɛnt dɛn de pan di ɔrijinal aplikeshɔn dairekshɔn fɔ PVC fom bod. Di list we de na di lɔw wata absɔpshɔn de mek di mɔstɔ pefɔmɛns rili impɔtant usay dɛn de yuz PVC instead ɔf panɛl dɛn we dɛn nɔ trit wit wud.
Finished kabinɛt durabiliti de dipen bak pan ol, fastɛns, jɔyn, adeziv, hinj ɛn instɔleshɔn. Yu fɔ avɔyd fɔ tinap wata rawnd hadwɔd ɔ jɔyn ivin we di bod insɛf nɔ gɛt bɛtɛ wata absɔpshɔn.
PVC Ko-Ekstrud Bod fɔ Fɛnichɔ
Di brayt tiknes rɛnj alaw fɔ evalyu kɔ-ɛkstrud PVC fom bod fɔ wodrɔb, shelf sistɛm, patishɔn, fɔnicha sayd panɛl, domɔt, displei fɔnicha ɛn ɔda fabricated kɔmpɔnɛnt dɛn.
Di wan dɛn we de bay fɔnicha fɔ spɛsifa di fes dɛn we pɔsin kin si, di edj tritmɛnt, di dɛkɔretiv finish, di panɛl dimɛnshɔn, di we aw dɛn kin fast am ɛn di lod we dɛn de op fɔ so dat dɛn go ebul fɔ rivyu di kɔrɛkt tik ɛn dɛnsiti.
PVC Ko-Ekstrud Bɔd fɔ Intɛriɔ Panɛl ɛn Patishɔn
Ko-ekstrud PVC fom bod kin evalyu bak fɔ intɛriɔ wɔl panɛl, patishɔn, dɛkɔretiv panɛl, kɔmɛshɔnal intɛriɔ ɛn fabricated akitekchral kɔmpɔnɛnt dɛn.
Fɔ intɛriɔ prɔjek, spɛsifa panɛl dimɛnshɔn, sɔpɔt spɛshal, jɔyn dizayn, fiks we, impak ɛksplɔshɔn, sɔfa finish ɛn ɛni prɔjek-spɛsifi k dɔkyumentri we dɛn nid.
PVC Kɔ-Ɛkstrud Bɔd fɔ Displei ɛn Ɛgzibishin
Di matirial kin yuz fɔ ɛgzibishin panɛl, rital displei, pɔynt-ɔf-sɛl strɔkchɔ, displei fɔnicha ɛn fabricated prɔmoshɔnal kɔmpɔnɛnt usay wan smol sɔfa ɛn izi mashin de yusful.
Fɔ displei dɛn we yu kin transpɔt, tink bɔt di tɔtal panɛl wet, jɔyn dizayn, ripit asɛmbli, grafik, we fɔ pak ɛn di tin dɛn we yu nid fɔ handle we yu de pik tik ɛn dɛnsiti.
CNC Routing, Kɔt ɛn Drilin
Di ɔrijinal prodak infɔmeshɔn de list fɔ saw, fɔ stamp, fɔ panch, fɔ kɔt day, fɔ sand, fɔ drɔ, fɔ skru, fɔ nel ɛn fɔ rivet. Co-extruded PVC fom bod kin prosɛs bak bay CNC routing ɛn engraving yuz suitable tooling.
Prosesin paramita dεm fכ akכnt fכ כl tu di dens surface layεr εn fכm kכr. Fɔ di komponent dɛn we dɛn dɔn mek bifo tɛm, gi dimɛnshɔn dɛn we dɔn dɔn, di profayl dɛn we dɛn dɔn kɔt, dip fɔ di routin, dimɛnshɔn dɛn fɔ di grov, di pozishɔn dɛn we di ol dɛn gɛt ɛn di tolɛreshɔn dɛn.
Tik 20–30mm bod dɛn alaw dip routin pas tin sheet matirial s, bɔt mashin dip fɔ pik akɔdin to di dizayn we dɔn dɔn ɛn di matirial tik we lɛf.
Skru Holding, Hinj ɛn Hadwɔd
Di sɔs infɔmeshɔn de list skru, nel ɛn rivet as di prɔsesin we de. Aktual fastening pefomans dipen pan bod tiknes, density, surface-layer konstrakshɔn, skru jɔyometri, payɔt-hol dimɛnshɔn, insɛshɔn dip ɛn edj distans.
Fɔ hinj, drɔwa slayd, brakɛt ɛn fɔnicha hadwae we gɛt bɔku lod, validet di aktual bod-ɛn-fastena kɔmbayn bifo yu apruv volyum prodakshɔn.
Bonding, Lamination ɛn Peint
Di orijinal prodakt diskripshɔn se PVC fom bod kin bon yuz PVC adeziv.
Suitable co-extruded surfaces kin evaluate tu fɔ kɔmpitabl dɛkɔretiv film, kɔtin ɛn printin sistem. Adhesive kemistri, surface pripia, temperechur, prɛshɔn ɛn curing kɔndishɔn fɔ tɛst yuz di aktual prodakshɔn surface.
Glossy vs. Matt Surface, we de mek yu fil
| Surface |
Jɛnɛral Sɛlɛkshɔn Dairekshɔn |
| Glossy, we de shayn |
Fɛnichɔ, kabinɛt panɛl, displei ɛn visible dɛkɔretiv kɔmpɔnɛnt dɛn we nid fɔ luk ay-shin |
| Mat |
Fɛnichɔ, patishɔn, wɔl panɛl, sayn ɛn intɛriɔ usay dɛn kin lɛk fɔ ridyus riflɛkshɔn |
We di surface appearance na krichɔl, apruv wan ripɔt sampul bifo yu put ripit prodakshɔn ɔda.
Standart 4×8 ɛn Big-Fɔmat Sayz dɛn
Di ditayl prodak infɔmeshɔn we de naw de sho 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm ɛn 2050 × 3050mm sheet matirial fɔmat dɛn.
1220 × 2440mm na aprɔksimatli di kɔmɔn 4×8 ft fɔmat we dɛn kin yuz insay kabinɛt, fɔnicha, CNC ɛn displei fabrikeshɔn. Big 1560 × 3050mm ɛn 2050 × 3050mm fɔmat kin ridyus jɔyn ɔ impɔtant kɔt yield fɔ ɔvasayz kɔmpɔnɛnt dɛn.
Bifo yu pik big fɔmat bɔd, kɔnfɔm CNC-bed saiz, hanlin ikwipmɛnt, stɔrɔj rɛk, palet dimɛnshɔn ɛn kɔntena-lod rikwaymɛnt.
Rifrɛns Fizik Prɔpati dɛn
Di valyu dɛn we de dɔŋ ya, dɛn kip dɛn frɔm di ɔrijinal PVC fom-bɔd tebul. Dɛn fɔ trit dɛn lɛk prodak-famili rɛfrɛns data pas dɛn kɔnfyus fɔ di ɛksaktɔl kɔ-ɛkstrud strɔkchɔ, tiknɛs ɛn dɛnsiti we dɛn de bay.
| Testing Item |
Unit |
List Rizult |
| Tik |
g/cm⊃3 we de na di bɔdi; |
0.35–1.0 |
| Tensile Strɔng we pɔsin kin gɛt |
MPa |
12–20 |
| Strɔng fɔ Bɛnd |
MPa |
12–18 |
| Bending Elasticity Modulus fɔ di wan dɛn we de du di wok |
MPa |
800–900 ɛn 900 |
| Impekt Strɔng |
kJ/m⊃2 ɛn di ɔda wan dɛn; |
8–15 |
| Elongation na Brek |
% . |
15–20 |
| Shore Hardness we pɔsin kin gɛt |
D. D |
45–50 |
| Wata we De Absɔp |
% . |
≤1.5 |
| Vicat Softening Point we dɛn kin yuz fɔ mek tin dɛn |
°C |
73–76 |
| Listed Faya Pɔfɔmɛnshɔn |
- |
Self-Extinguishing insay Les Dan 5 Sɛkɔn |
Mɔstɔ ɛn Wata Absɔpshɔn
Di kɔrɛnt rɛfrɛns tebul de list di wata absɔpshɔn na ≤1.5%. Dis de mek di mɔstɔ pefɔmɛns rili impɔtant fɔ batrum kabinɛt, kichin fɔnicha ɛn fayn intɛriɔ aplikeshɔn dɛn.
Finish pefɔmɛns fɔ stil evalyu as kɔmplit sistɛm bikɔs fastɛns, adeziv, jɔyn, ed tritmɛnt ɛn ɔda matirial dɛn kin gɛt difrɛn mɔstɔ limiteshɔn frɔm di PVC bɔd.
Tin dɛn fɔ Tink bɔt fɔ Ɔt ɛn Faya
di orijinal prodakt-famili data list wan Vicat softin poynt we de 73–76°C εn sεlf-extinguishing bihayvya insay less dan fayv sεkכnd.
We wan prɔjek nid fɔ gɛt wan patikyula faya klasifikeshɔn, flame-spred valyu, smok rɛytin ɔ tɛmpracha limit, aks fɔ aplikebul dɔkyumentri fɔ di ɛksaktɔl kɔ-ɛkstrud bɔd gred we dɛn de ɔda.
Indo ɛn Ɔda Aplikeshɔn dɛn
Di ɔrijinal prodak infɔmeshɔn de list indo dɛkɔretiv panɛl, patishɔn ɛn ɔda wɔl-bɔd aplikeshɔn dɛn insay di brayt prodak rɛnj.
Fɔ lɔng tɛm ɛkstirian ɛksplɔshɔn, kɔnfɔm se di kɔ-ɛkstrud fɔmyulashɔn we dɛn pik na fɔ di UV ɛksplɔshɔn we dɛn nid, tɛmpracha sayklin, kɔlɔ stebiliti ɛn di savis layf we dɛn de ɛkspɛkt.
Ko-Ekstrud PVC fom bod Aplikeshɔn dɛn
Kichin Kabinɛt: Kabinɛt bɔdi, patishɔn, shelf, domɔt ɛn ɔda kɔmpɔnɛnt dɛn we dɛn pik akɔdin to tik, dɛnsiti ɛn hadwae we dɛn nid.
Bathroom Cabinets: Vaniti ɛn wasrum kɔmpɔnɛnt dɛn usay low wata absɔpshɔn de yusful.
Fɛnichɔ Panɛl: Wodrɔb, shelf, patishɔn, domɔt, sayd panɛl ɛn fɔnicha kɔmpɔnɛnt dɛn we dɛn mek.
Intɛriɔ Dɛkɔreshɔn: Wall panɛl, patishɔn, dɛkɔretiv kɔmpɔnɛnt ɛn kɔmɛshɔnal intɛriɔ panɛl.
Displei ɛn Ɛgzibishin: Ritayl displei, ɛgzibishin strɔkchɔ, pɔynt-ɔf-sɛl panɛl ɛn displei pat dɛn we dɛn mek.
Print ɛn Sayn: Dɛn dɔn pik skrin-printin, flatbed-printin, engraving ɛn bilbɔd aplikeshɔn dɛn afta dɛn dɔn kɔnfɔm sɔfayz kɔmpatibiliti.
CNC Fabrication: Dɛn dɔn rout, drɔl, engrav ɛn kɔt-to-sayz kɔmpɔnɛnt dɛn akɔdin to tik we fit.
Aplikeshɔn Pikchɔ dɛn
![Ko-ɛkstrud PVC fom bod fɔnicha kabinɛt ɛn intɛriɔ aplikeshɔn]( "Co-Extruded PVC Foam Board Application")
Co-Extruded PVC Bod fɔ Fɛnichɔ & Intɛriɔ Aplikeshɔn
![PVC ko-ekstrushɔn fom bod fɔ kabinɛt ɛn fɔnicha fabrikeshɔn]( "PVC Foam Board Cabinet Application")
PVC Ko-Ekstrushɔn Bɔd fɔ Kabinɛt & Fɛnichɔ Fabrikeshɔn
Aw fɔ Spɛsifik 2–30mm Kɔ-Ɛkstrud PVC fom bod
| RFQ Item |
Infɔmeshɔn fɔ Gi |
| Aplay fɔm |
Kabinɛt, fɔnicha, wɔl panɛl, patishɔn, displei, sayn, CNC pat ɔ ɔda aplikeshɔn |
| Tik we i tik |
Rikwayd tiknes insay di 2–30mm prodakt rεnj |
| Tiknɛs Tolɛreshɔn |
Rikwayd nominal tiknɛs tolɛreshɔn usay krichɔl fɔ mashin ɔ asɛmbli |
| Tik |
Rikwayd density ɔ target sheet matirial wet |
| Sayz fɔ di Shit |
1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm, 2050 × 3050mm ɔ saiz we dɛn nid |
| Strɔkchɔ we de na di wɔl |
Konfam rikwayd co-extruded surface konfigyushɔn ɛn visible fes |
| Kɔlɔ |
Wait, blak ɔ kɔlɔ we dɛn nid |
| Surface Finish na di wɔl |
Glossy ɔ mat |
| Kor / Ɛj Apɛndiks |
Kɔnfɛm di kɔr kɔlɔ we yu nid ɛn di we aw yu de si di mashin-ɛj we yu de si usay i rili impɔtant |
| CNC Prɔsesin |
Kɔt, routin, drɔlin, engrav, grov, panch ɛn dimɛnshɔnal tolɛreshɔn |
| Hadwɔd we dɛn kin yuz |
Skru, hinj, drɔwa slayd, brakɛt ɔ ɔda tin dɛn we dɛn nid fɔ fast |
| Panel Span ɛn Lod |
Finish dimɛnshɔn, span we nɔ sɔpɔt, lod we dɛn de ɛkspɛkt ɛn sɔpɔt ples dɛn |
| Fɔ Finish Mɔ Tin dɛn |
Dairekt surface yus, peint, printin ɔ dɛkɔretiv laminɛshɔn |
| Savis Envayrɔmɛnt |
Indo, humid intɛriɔ, protɛkt ɛkstirian ɔ prɔpɔz ɔdasay ɛksplɔshɔn |
| Dokumɛnt dɛn we dɛn rayt |
Fizik-prɔpati, faya ɔ ples-maket dɔkyumɛnt dɛn we dɛn nid |
| Ɔmɔs |
Kwantiti we dɛn nid; MOQ we de na di list naw na 3 tan |
| Usay yu de go |
Di kɔntri ɔ pɔt usay dɛn de go |
PVC fom bod SGS Dokumɛnt
Di ɔrijinal prodak pej de gi di PVC fom bod SGS dɔkyumɛnt we de dɔŋ ya. Kɔnfɛm se di dɔkyumɛnt de aplay to di ɛksaktɔl kɔ-ɛkstrud strɔkchɔ, tik ɛn density we dɛn nid fɔ di prɔjek.
Pakɛj ɛn Kɔmishɔn Infɔmeshɔn
Di tin dɛn we dɛn pak: Dɛn rayt plastic bag dɛn, katon dɛn, palet dɛn ɛn kraft pepa dɛn na di infɔmeshɔn bɔt di prɔdak we de naw.
MOQ: Di kɔrɛnt ditayl spɛsifikɛshɔn de list wan minim ɔda kwantiti we na 3 tan.
Peyment: T/T, L/C, D/P ɛn Wɛstɛn Yuniɔn de na di list.
Dilivri Tɛm: EXW, FOB, CNF ɛn DDU de na di ɔrijinal FAQ.
Lid Taym: Di ditayl spɛsifikɛshɔn de list lɛk 15–20 dez afta dipɔsit. Di ol FAQ gɛt 10–14 wok-de stetmɛnt, so kɔnfɔm di prodakshɔn schedule we de naw wit di kot.
Sampul dɛn: Dɛn rayt fri sampul dɛn as dɛn de. Kɔnfɛm tik, dɛnsiti, sɔfayz strɔkchɔ, saiz ɛn ɛkspɛs-frayt arenjmɛnt we yu de aks fɔ sampul.
Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt kɔ-ɛkstrud PVC fom bod
Wetin na ko-ɛkstrud PVC fom bod?
Na wan ɛkspanda rigid PVC panɛl wit laytwɛt fom kɔr ɛn dens kɔ-ɛkstrud PVC sɔfa layers, we dɛn mek fɔ fayn fɔnicha, kabinɛt, intɛriɔ, displei ɛn fabricated aplikeshɔn.
Us tik tin dɛn dis prɔdak de kɔba?
Dis pej de fos pan 2–30mm ko-ekstrud PVC fom bod. Di ɔrijinal ditayla HSQY famili tebul de list bak 1–35mm, so di avaylabl ausayd di fichu 2–30mm rɛnj fɔ kɔnfyus sɛpret.
Aw a go pik di kɔrɛkt tik?
Pik akɔdin to panɛl dimɛnshɔn, density, sɔpɔt, hadwae, mashin dip, finish aplikeshɔn ɛn ɛkspɛkt lod. Tin bod dɛn kin fit fɔ sɔpɔt laytwɛt aplikeshɔn dɛn, we tik bod dɛn kin ebul fɔ evalyu fɔ fɔnicha ɛn kabinɛt kɔmpɔnɛnt dɛn we nid fɔ mek dɛn dip mɔ panɛl.
Us density rεnj de?
Di kɔrɛnt ditayl sɔs list 0.35–1.0g/cm³. Konfam di aktual density togeda wit tiknes bikos density influens di bod weit, rigiditi en fabrication bihayv.
Us sheet matirial saiz dɛn de na di list?
Di spɛsifikɛshɔn we de naw de sho 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm ɛn 2050 × 3050mm.
4×8 PVC ko-ekstrud bod de?
Yɛs. 1220 × 2440mm na lɛk 4×8 ft ɛn i de insay di list we de naw fɔ di prɔdak-sayz.
Yu tink se dɛn kin yuz am fɔ mek kabinɛt dɛn na di kichin?
Yɛs. Kichin kabinɛt dɛn de pan di sɔs aplikeshɔn dɛn. Pik tik ɛn densiti akɔdin to if dɛn yuz di bod fɔ kabinɛt bak, patishɔn, bɔdi, domɔt, shelf ɔ ɔda kɔmpɔnɛnt.
Yu tink se dɛn kin yuz am fɔ mek batrum kabinɛt?
Yɛs. Dɛn rayt bak di list we dɛn kin yuz fɔ yuz kabinɛt na di was rum. Finish pefɔmɛns dipen pan di kɔmplit kabinɛt dizayn, inklud fastɛns, jɔyn, adeziv ɛn instɔleshɔn.
Yu tink se ko-ekstrud PVC bod kin bi CNC rout?
Yɛs. Di matirial kin evalyu fɔ CNC routin, kɔt, drɔlin ɛn engraving. Tul ɛn mashin sɛtin fɔ mach to di tik, dens ɛn sɔfa strɔkchɔ we yu dɔn pik.
Yu tink se tik 20–30mm bod dɛn kin dip dip wan?
Tik bod dɛn de gi mɔ matirial dip fɔ fayn rout dizayn, bɔt routin dip fɔ pik akɔdin to di ɔda bod tik, density, kɔr strɔkchɔ ɛn finish-pat trɛnk we dɛn nid.
Di bod kin ol skru ɛn hinj?
Di sɔs infɔmeshɔn de list skru fastɛns as wan we fɔ prosɛs we de. Aktual skru ɛn hinj pefɔmɛns dipen pan tik, density, skin strɔkchɔ, fastener dizayn, payɔt ol, edj distans ɛn lod.
Yu tink se dɛn kin bond di bɔd?
Di ɔrijinal prodakt diskripshɔn se dɛn kin yuz PVC adhesives. Adhesive kompitibiliti fɔ tɛst wit di ɛksaktɔ prodakshɔn sɔfa ɛn asɛmbli prɔses.
Yu tink se dɛn kin laminate kɔ-ɛkstrud PVC bod?
Suitabl surfaces kin evaluet fɔ dɛkɔretiv-film lamination. Konfam adhesive kemistri, surface pripia, temperechur, prɛshɔn ɛn finish ed rikwaymɛnt bifo prodakshɔn.
Yu tink se dɛn kin print di bɔd?
Skrin printin ɛn flat sɔlvɛnt printin de pan di ɔrijinal aplikeshɔn dɛn. Test di aktual prodakshɔn sɔfays wit di intended printin prɔses bifo bulk prodakshɔn.
PVC ko-ekstrud bod moisture resistant?
Di sɔs fizik-prɔpati tebul de list wata absɔpshɔn na ≤1.5%. Finish prodakt pefɔmɛns de dipen bak pan jɔyn, fastɛns, adeziv ɛn instɔleshɔn kɔndishɔn.
Yu tink se dɛn kin yuz am na do?
Yuz di wɔl-bɔd na do de insay di ɔrijinal aplikeshɔn list, bɔt dɛn fɔ kɔnfyus fɔ lɔng tɛm ɛkstirian suitability fɔ di ɛksaktɔ gred akɔdin to UV ɛksplɔshɔn, tɛmpracha, kɔlɔ stebiliti ɛn savis layf we dɛn nid.
Yu tink se di bɔd nɔ de mek faya?
Di ɔrijinal prodak-famili data de list di we aw pɔsin de biev we i de kil insɛf insay lɛs pas fayv sɛkɔn. If wan prɔjek nid fɔ gɛt wan patikyula faya klasification, aks fɔ di aplikebul ripɔt fɔ di ɛksaktɔl kɔ-ɛkstrud gred.
Us surface finish dɛn de we dɛn kin gɛt?
Di kɔrɛnt ditayl spɛsifikɛshɔn de list glos ɛn mat sɔfays.
Us kɔlɔ dɛn de?
Di sɔs we de naw de sho wayt, rɛd, yɔlɔ, blu, grɛn ɛn blak, wit ɔda opshɔn dɛn we dɛn sho.
Wetin na di MOQ?
Di kɔrɛnt ditayl prodak spesifikeshɔn de list wan minim ɔda kwantiti we na 3 tan.
Yu tink se sampul dɛn de?
Di ɔrijinal prodak infɔmeshɔn de list fri sɛmpul dɛn as dɛn de. Kɔnfɛm tik, dɛnsiti, sheet matirial saiz, sɔfayz strɔkchɔ ɛn ɛkspɛs-frayt arenjmɛnt we yu de aks fɔ sampul.
Us infɔmeshɔn a fɔ gi fɔ kot?
Gi di aplikeshɔn, tiknes, density, sheet matirial saiz, kɔlɔ, sɔfayz finish, kɔ-ɛkstrud strɔkchɔ, CNC rikwaymɛnt, hadwae ditel, panɛl lod, adishɔnal finish, kwantiti ɛn dɛstineshɔn.
Bɔt HSQY Plastik Grup
HSQY Plastic Group de saplae PVC ko-ekstrushɔn fom bod ɛn ɔda plastic sheet matirial prodak to kabinɛt manifakta, fɔnicha faktri, intɛriɔ kɔntrakta, displei manifakta, sayn kɔmni, distribyushɔn ɛn industrial fabricatɔ.
Fɔ 2–30mm kɔ-ɛkstrud PVC bod projɛkt, gi di tiknɛs we dɛn nid, dɛnsiti, sheet matirial saiz, sɔfayz strɔkchɔ, prɔsesin we, finish aplikeshɔn ɛn bay bay kwantiti so di aprɔpriet prodakshɔn spɛsifikɛshɔn kin rivyu.
HSQY Kwalifayeshɔn ɛn Ɛgzibishin Infɔmeshɔn
![HSQY PVC fom bod kwalifayeshɔn infɔmeshɔn]( "HSQY Qualification Information")
HSQY Kwalifayeshɔn Infɔmeshɔn
![HSQY Plastik Grup ɛgzibishin infɔmeshɔn]( "HSQY Exhibition Information")
HSQY Infɔmeshɔn bɔt Ɛgzibishin
PVC fom bod SGS PDF we gɛt di taytul
