HSQY 4×8 wayt PVC co-extruded foam board na laytwɛt rigid panɛl we dɛn mek fɔ kabinɛt, fɔnicha, intɛriɔ panɛl, CNC fabrication, displei ɛn ɔda aplikeshɔn dɛn we nid fɔ gɛt smol wayt finish surface ɛn sɛlular PVC kɔr.
Di standad 1220 × 2440mm fɔmat na lɛk 4×8 ft ɛn i fayn fɔ kɔmɔn kabinɛt, fɔnicha, CNC-routing ɛn panɛl-fabrikeshɔn wokflɔ. Di ko-extruded konstrakshɔn de kɔba denser surface layers wit wan layt foamed kor.
Fɔ bɔku ɔda, di wan dɛn we de bay fɔ spɛsifa tik, dɛnsiti, sɔfayz finish, sheet matirial dimɛnshɔn, mashin prɔses, fastɛns we ɛn finish aplikeshɔn so di aprɔpriet wayt kɔ-ɛkstrud gred kin kɔnfɔm.
PVC Ko-Ekstrud Fom Bod Vidio
4×8 Wait PVC Ko-Ekstrud Bod Imej
![4x8 wayt PVC ko-ekstrud fom bod sheet matirial]( "4x8 White PVC Co-Extruded Foam Board")
4×8 Wait PVC Ko-Ekstrud Fom Bod
![Wait ko-ekstrud PVC fom bod fɔ displei ɛn fabrikeshɔn]( "White PVC Foam Display Board")
Wait PVC fom bod fɔ Displei & Fabrikeshɔn
4×8 Wait PVC Ko-Ekstrud Bɔd Spɛsifikeshɔn dɛn
Dis pej de fos pan di wayt 1220 × 2440mm / aprɔksimatli 4×8 ft vɛshɔn. Ɔda tiknes, sheet matirial saiz ɛn kɔlɔ dɛn we dɛn sho dɔŋ ya de pan di brayt HSQY PVC fom-bɔd rɛnj.
| Prɔpati |
Spɛsifikeshɔn |
| Di Prodak Nem |
4×8 Wait PVC Ko-Ekstrud Fom Bod |
| Tin dɛn |
PVC |
| Sayz we dɛn sho |
1220 × 2440mm / Na lɛk 4×8 ft |
| Kɔlɔ we dɛn dɔn sho |
Wayt |
| Seri Tiknɛs Rɛnj |
1–35mm we de na di wɔl |
| Densiti Rɛnj |
0,35–1,0g/cm³; kכnfכm aktual dεnsiti fכ di sεlekt kכ-εkstrud grεd |
| Ɔda Sayz dɛn we dɛn dɔn list |
915 × 1830mm, 1560 × 3050mm, 2050 × 3050mm |
| Ɔda Seri Kɔlɔ dɛn |
Rɛd, Yɔlɔ, Blu, Grin, Blak ɛn Ɔda Opshɔn dɛn |
| Surface Finish na di wɔl |
Glossy, Matte, ɛn ɔda pipul dɛn |
| Aplikeshɔn dɛn |
Fɛnichɔ, Kabinɛt, Intɛriɔ Panɛl, Displei, Printin, Advatayzmɛnt ɛn Fabrikɛshɔn |
| Di we aw dɛn de du di wok |
Saw Kɔt, CNC Routin, Drlin, Engravin, Panch, Sandin, Skru, Nɛl, Rivɛt ɛn Bɔnd |
| MOQ we gɛt fɔ du wit am |
3 Tan dɛn |
| Kwaliti Kɔntrol |
Raw Matirial Sɛlɛkshɔn, Prɔses Monitorin ɛn Pis-bay-Pis Inspekshɔn List |
| Di we aw dɛn de pak di tin dɛn |
Plastik Bag, Katon, Palet ɛn Kraft Pepa |
| Pe |
T/T, L/C, D/P, Wɛstɛn Yuniɔn |
| Listed Lid Taym |
Aproksimayt 15–20 Dez Afta Dipɔsit |
| Sampul dɛn |
Fri Sampul dɛn we Dɛn List As Dɛn De; Kɔnfɛm Sampul Spɛsifikeshɔn ɛn Freyt Arenjmɛnt |
Wetin Na Wayt PVC Kɔ-Ɛkstrud Fom Bɔd?
PVC ko-ekstrud fom bod de yuz wan selula PVC kor togeda wit denser PVC surface layers we fכm di tεm we di extrusion prכsεs de. dis de mek wan layt wet bod wit wan smol, fכm כta sεf pas wan bεsik sεl kכr nכmכ.
Di wayt sɔfays yusful fɔ kabinɛt, fɔnicha, intɛriɔ panɛl, displei ɛn fabrication usay klin finished apinans ɔ fayn bays fɔ advatayz finishing nid fɔ de.
di ekzak skin tik, di sכfa strכkchכ εn di kכr dεnsiti dipכnt pan di prodakshכn grεd we dεn sεlekt. Baya dɛn we nid spɛshal mashin, fastɛns ɔ finish pefɔmɛns fɔ kɔnfɔm dɛn paramita ya bifo dɛn ɔda.
Wetin Mek 4×8 Na Standart Fabrikeshɔn Sayz
Di 1220 × 2440mm fɔmat na lɛk 4×8 ft ɛn dɛn de yuz am bɔku bɔku wan fɔ kabinɛt panɛl, fɔnicha kɔmpɔnɛnt, CNC-routing prɔjek, displei fabrikeshɔn ɛn intɛriɔ panɛl.
Yuz wan standad sheet matirial saiz kin mek am izi fɔ mek yu nɛst, fɔ sɛtup mashin, fɔ plan di matirial ɛn fɔ handle palet. Baya dɛn fɔ stil kɔmpia di sheet matirial dimɛnshɔn wit finish pat saiz ɛn CNC-bed dimɛnshɔn fɔ ɔptimayz di matirial yield.
Smooth Wait Ko-Ekstrud Surface
Wan men rizin fɔ spɛsifa wan kɔ-ɛkstrud bɔd na di densa ɔda say. I de gi wan smol fes we fit fɔ aplikeshɔn usay di apinɛns, fabrikeshɔn kwaliti ɔ ɔda sɔfa finishing impɔtant.
Fɔ fɔnicha ɛn intɛriɔ panɛl, di wan dɛn we de bay kin evalyu di bod fɔ yuz dairekt wayt, kɔmpitabl peint ɔ dɛkɔretiv laminɛshɔn. Fɔ displei aplikeshɔn, dɛn fɔ chɛk di sɔfays we fit fɔ de agens di grafik dɛn we dɛn want ɔ di we aw dɛn de dɔn di wok.
4×8 Wayt PVC Bod fɔ Kabinɛt dɛn
Wait ko-ɛkstrud PVC fom bod kin evalyu fɔ kichin kabinɛt, batrum kabinɛt, sayd panɛl, patishɔn, shelf ɛn ɔda fɔnicha kɔmpɔnɛnt dɛn usay wan smol finish sɔfays ɛn lɔw wata absɔpshɔn de yusful.
Fɔ kabinɛt aplikeshɔn, spɛsifa di panɛl tiknes, density, hadwae tayp, hinj pozishɔn, shelf span, ɛkspɛkt lod ɛn edj tritmɛnt. Di kɔrɛkt spɛsifikɛshɔn dipen pan di kabinɛt kɔmpɔnɛnt pas sheet matirial saiz nɔmɔ.
4×8 PVC Ko-Ekstrud Bod fɔ Fɛnichɔ
Di kɔmbaynshɔn fɔ wan smol sɔfays, sɛlular kɔr ɛn standad 4×8 sheet matirial fɔmat de mek kɔ-ɛkstrud PVC bɔd rili impɔtant to fɔnicha faktri dɛn we de prodyuz domɔt, sayd panɛl, patishɔn, displei fɔnicha ɛn ɔda fabricated kɔmpɔnɛnt dɛn.
Usay edj dɛn we pɔsin kin si kin lɛf afta dɛn dɔn mashin, sho di edj we dɛn nid fɔ luk ɛn if dɛn go yuz edj band, peint ɔ ɔda we fɔ dɔn.
CNC Routing, Kɔt ɛn Engravin
Di ɔrijinal prodak infɔmeshɔn de list saw, stamp, panch, day kɔt, sand ɛn drɔl as di prɔsesin we dɛn de. Co-extruded PVC bod kin evaluet bak fɔ CNC routing ɛn engraving akɔdin to di finished kɔmpɔnɛnt.
CNC setin fɔ akɔn fɔ di densa sɔfa layt ɛn layt fom kɔr. Fɔ di kɔmpɔnɛnt dɛn we dɛn dɔn mek bifo tɛm, gi dimɛnshɔn dɛn we dɔn dɔn, dip fɔ di routin, di say dɛn we di ol dɛn de, dimɛnshɔn dɛn fɔ di grov ɛn di tolɛreshɔn dɛn.
Skru Holdin ɛn Hadwɔd Instɔlɛshɔn
Di sɔs prodak infɔmeshɔn se PVC fom bɔd kin drɔ, skru, nel ɛn rivɛt. Fɔ kɔ-ɛkstrud gred, di dens sɔfa kin rili impɔtant bak rawnd hadwae lokeshɔn dɛn.
Aktual skru ɛn hinj pefɔmɛns dipen pan totɛl bod tiknes, density, skin strɔkchɔ, skru jɔyometri, payɔt-ol saiz, insɛshɔn dip, edj distans ɛn aplay lod.
Kabinɛt domɔt, shelf ɛn hadwae we dɛn kin lod bɔku tɛm fɔ tɛst yuz di aktual prodakshɔn bɔd ɛn di fastɛns dɛn we dɛn bin want fɔ mek bifo dɛn prodyuz bɔku bɔku wan.
Bonding, Peint ɛn Laminɛshɔn
Di ɔrijinal prodak infɔmeshɔn se PVC fom bɔd kin bon wit kɔmpitabl PVC adeziv.
Di smol wayt ko-extruded surface kin evaluate tu fo kompitibul peint sistem en dekorativ film. Surface pripia, adhesive kemistri, aplikeshon temperechur en curing rikwaymɛnt fɔ validet bifo bulk prodakshɔn.
Wait PVC Ko-Ekstrud Bɔd fɔ Displei dɛn
Di wayt sɔfa ɛn 4×8 sheet matirial fɔmat de mek bak di bod rili impɔtant to ɛgzibishin panɛl, rital displei, pɔynt-ɔf-sɛl strɔkchɔ, infɔmeshɔn panɛl ɛn fabricated displei kɔmpɔnɛnt dɛn.
Fɔ print grafik, tɛst di aktual bod sɔfays wit di ink ɛn printin sistem we yu want bifo yu prodyuz bɔku bɔku wan. Di printin kɔmpatibiliti fɔ kɔnfɔm fɔ di glos ɔ mat sɔfays we yu dɔn pik.
Glossy vs. Matt Surface, we de mek yu fil
| Surface |
Jɛnɛral Sɛlɛkshɔn Dairekshɔn |
| Glossy, we de shayn |
Ay-shin apinans fɔ panɛl dɛn we pɔsin kin si, displei ɛn fayn fayn fɔnicha sɔfays dɛn we dɔn dɔn |
| Mat |
Lɔwa-riflɛkshɔn apinans fɔ kabinɛt, intɛriɔ panɛl, displei ɛn sɔm printin aplikeshɔn dɛn |
Kɔnfɛm di aktual sɔfayz sampul bifo bɔlk prodakshɔn usay glos lɛvɛl, kɔlɔ ɔ vijual apinans impɔtant.
Pik di Rayt Tik ɛn Densiti
Di sos prodak-famili spɛsifikɛshɔn de list tiknes frɔm 1mm to 35mm ɛn densities frɔm 0.35 to 1.0g/cm³. Dɛn rɛnj ya kɔba aplikeshɔn dɛn wit rili difrɛn strɔkchɔral ɛn fabrikeshɔn rikwaymɛnt dɛn.
| Selection Factor |
Wetin Mek I Impɔtant |
| Tik we i tik |
Afɛkt panɛl dip, stiffness, mashin dip, fastening jɔyometri ɛn finish wet |
| Tik |
Afɛkt sheet matirial wet, rigiditi, mashin bihayvya ɛn hadwae pefɔmɛns |
| Strɔkchɔ we de na di wɔl |
Impɔtant fɔ apinans, peint, lamination, printin ɛn mashin-ɛj kwaliti |
| Panɛl Sayz |
Influɛns span we nɔ sɔpɔt, nɛst yield, handel ɛn mashin kɔmpitibliti |
| Di Aplikeshɔn we Dɛn dɔn dɔn |
Ditarmin if di bod fɔ sɔpɔt hadwae, lod, grafik ɔ dɛkɔretiv finish |
Rifrɛns Fizik Prɔpati dɛn
Di valyu dɛn we de dɔŋ ya, dɛn kip dɛn frɔm di ɔrijinal PVC fom-bɔd prodak infɔmeshɔn. Kɔnfɛm aplikebul tɛst data fɔ di ɛksaktɔ wayt kɔ-ɛkstrud gred, tiknɛs ɛn dɛnsiti usay wan prɔjek dipen pan wan spɛshal fizik prɔpati.
| Testing Item |
Unit |
List Rizult |
| Tik |
g/cm⊃3 we de na di bɔdi; |
0.35–1.0 |
| Tensile Strɔng we pɔsin kin gɛt |
MPa |
12–20 |
| Strɔng fɔ Bɛnd |
MPa |
12–18 |
| Bending Elasticity Modulus fɔ di wan dɛn we de du di wok |
MPa |
800–900 ɛn 900 |
| Impekt Strɔng |
kJ/m⊃2 ɛn di ɔda wan dɛn; |
8–15 |
| Elongation na Brek |
% . |
15–20 |
| Shore Hardness we pɔsin kin gɛt |
D. D |
45–50 |
| Wata we De Absɔp |
% . |
≤1.5 |
| Vicat Softening Point we dɛn kin yuz fɔ mek tin dɛn |
°C |
73–76 |
| Listed Faya Pɔfɔmɛnshɔn |
- |
Self-Extinguishing insay Les Dan 5 Sɛkɔn |
Low Wata Absɔpshɔn ɛn Mɔstɔ Resistɛns
Di sos teknikol data list wata absכpshכn na ≤1.5%. Dis de mek di mɔstɔ pefɔmɛns rili impɔtant fɔ kabinɛt, batrum fɔnicha ɛn fayn intɛriɔ-panɛl aplikeshɔn dɛn.
Finish prodakt pefɔmɛns de dipen bak pan ol, jɔyn, adeziv, fastɛns ɛn ɔda matirial dɛn we de na di asɛmbli. Di kɔmplit kabinɛt ɔ panɛl sistɛm fɔ evalyu fɔ di envayrɔmɛnt we dɛn want.
Tin dɛn fɔ Tink bɔt fɔ Ɔt ɛn Faya
di sos prodakt-famili data list wan Vicat softin poynt we de 73–76°C εn sεlf-extinguishing bihayvya insay less dan fayv sεkכnd.
We wan prɔjek nid fɔ gɛt wan patikyula faya klasification, flame-spred retinj, smok rikwaymɛnt ɔ savis-tɛmpracha limit, aks fɔ dɔkyumentri fɔ di ɛksaktɔl kɔ-ɛkstrud gred pas fɔ abop pan jenɛral prodak-famili data nɔmɔ.
Yuz insay os ɛn na do
Di ɔrijinal prodak infɔmeshɔn inklud intɛriɔ dɛkɔreshɔn, kɔnstrɔkshɔn ɛn ɔda wɔl-bɔd aplikeshɔn dɛn insay di brayt PVC fom-bɔd rɛnj.
Fɔ yuz fɔ lɔng tɛm na do, kɔnfɔm if di wayt kɔ-ɛkstrud fɔmyulashɔn we yu dɔn pik na fɔ UV ɛksplɔshɔn ɛn evalyu di kɔlɔ stebiliti, tɛmpracha sayklin, mawntin sistɛm ɛn di savis layf we dɛn nid.
Wait PVC Ko-Ekstrud Bɔd Aplikeshɔn dɛn
Kichin Kabinɛt: Kabinɛt bɔdi, sayd panɛl, patishɔn, shelf ɛn sɛlɛkshɔn domɔt aplikeshɔn dɛn akɔdin to tik, dɛnsiti ɛn hadwae.
Bathroom Cabinets: Vaniti ɛn washrum kabinɛt kɔmpɔnɛnt dɛn usay lɔw wata absɔpshɔn impɔtant.
Fɛnichɔ Panɛl: Doa, patishɔn, displei fɔnicha ɛn ɔda komponent dɛn we dɛn mek wit CNC.
Intɛriɔ Panɛl dɛn: Dɛkɔretiv wɔl panɛl dɛn, patishɔn dɛn ɛn intɛriɔ kɔmpɔnɛnt dɛn we dɛn mek.
Displei dɛn: Ɛgzibishin panɛl dɛn, shɔp fitin dɛn ɛn pɔynt-ɔf-sɛl strɔkchɔ dɛn.
Sayn ɛn Print Projɛkt: Dɛn dɔn pik di printin, engraving ɛn bilbɔd aplikeshɔn dɛn afta dɛn dɔn kɔnfyus se di sɔfays kɔmpitibliti.
View More PVC Ko-Ekstrushɔn Fom Bɔd Opshɔn dɛn
PVC Ko-Ekstrud Bɔd Aplikeshɔn Imej dɛn
![Wait PVC ko-ɛkstrud fom bod fɔnicha ɛn intɛriɔ aplikeshɔn]( "White PVC Co-Extruded Board Application")
Wait PVC Ko-Ekstrud Bod fɔ Fɛnichɔ & Intɛriɔ
![4x8 PVC ko-ekstrud bod fɔ kabinɛt displei ɛn fabrikeshɔn aplikeshɔn dɛn]( "PVC Foam Board Fabrication Application")
4×8 PVC Bod Fabrikeshɔn Aplikeshɔn
Aw fɔ Spɛsifik 4×8 Wayt PVC Kɔ-Ɛkstrud Bɔd
| RFQ Item |
Infɔmeshɔn fɔ Gi |
| Sayz fɔ di Shit |
1220 × 2440mm / lɛk 4×8 ft fɔ dis prɔdak |
| Kɔlɔ |
Wayt |
| Tik we i tik |
Tik we dɛn nid akɔdin to di aplikeshɔn we dɛn dɔn dɔn |
| Tik |
Rikwayd density ɔ target sheet matirial wet |
| Sho |
Glossy ɔ mat rikwaymɛnt |
| Ko-Ekstrud Struktrɔ |
Konfam rikwayd surface-layer konfigyushɔn fɔ di gred we yu dɔn pik |
| Aplay fɔm |
Kabinɛt, fɔnicha, intɛriɔ panɛl, displei, sayn ɔ ɔda kɔmpɔnɛnt we dɛn mek |
| CNC Prɔsesin |
Kɔt, routin, engravin, drɔlin, grov ɛn dimɛnshɔnal tolɛreshɔn |
| Hadwɔd we dɛn kin yuz |
Hinj, skru, slayd, brakɛt ɔ ɔda tin dɛn we dɛn nid fɔ tay wit mashin |
| Fɔ Finishin na di Surface |
Orijinal wayt surface, peint, printin ɔ dɛkɔretiv lamination |
| Edj Finish fɔ dɔn |
Raw mashin edj, edj banding ɔ ɔda finishing rikwaymɛnt |
| Savis Envayrɔmɛnt |
Indo, humid intɛriɔ ɔ prɔpɔz ɔdasay ɛksplɔshɔn |
| Pafɔm |
Rigiditi, mɔstɔ, skru holdin, sɔfa ɔ ɔda prɔjek rikwaymɛnt dɛn |
| Ɔmɔs |
Kwantiti we dɛn nid; MOQ we de na di list naw na 3 tan |
| Usay yu de go |
Di kɔntri ɔ pɔt usay dɛn de go |
PVC fom bod SGS Dokumɛnt
Di ɔrijinal prodak pej de gi di SGS dɔkyumɛnt we de dɔŋ ya. Kɔnfɛm se di ripɔt de aplay to di ɛksaktɔ wayt kɔ-ɛkstrud PVC bɔd tik ɛn density we yu nid fɔ yu prɔjek.
Pakɛj ɛn Kɔmishɔn Infɔmeshɔn
Fɔ pak: Dɛn rayt plastic bag, katon, palet ɛn kraft pepa as di tin dɛn we yu kin pak fɔ pak.
MOQ: Di kɔrɛnt ditayl prodak spesifikeshɔn de list wan minim ɔda kwantiti we na 3 tan.
Peyment: T/T, L/C, D/P ɛn Wɛstɛn Yuniɔn de na di list.
Dilivri Tɛm: EXW, FOB, CNF ɛn DDU de na di list na di ɔrijinal prodak FAQ.
Lid Taym: Di men spɛsifikɛshɔn de list lɛk 15–20 dez afta dipɔsit. Kɔnfɛm di prodakshɔn schedule we de naw wit di kot bikɔs di ɔrijinal FAQ gɛt wan ol 10–14 wok-de stetmɛnt bak.
Sampul dɛn: Dɛn rayt fri sampul dɛn as dɛn de. Kɔnfɛm tik, dɛnsiti, sɔfa ɛn ɛkspɛs-frɛyt arenjmɛnt we yu de aks fɔ sampul.
Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 4×8 Wait PVC Kɔ-Ɛkstrud Bɔd
Wetin na 4×8 wayt PVC ko-ekstrud fom bod?
Na wayt ɛkspanda PVC panɛl we gɛt lɛk 1220 × 2440mm in saiz, we dɛn mek wit dens PVC sɔfa layers ɛn laytwɛt sɛlular kɔr fɔ fayn kabinɛt, fɔnicha, intɛriɔ ɛn fabrikeshɔn aplikeshɔn dɛn.
Wetin na di difrɛns bitwin kɔ-ɛkstrud ɛn standad PVC fom bɔd?
Ko-ekstrud bod de yuz denser surface layers togeda wit wan fomed PVC kor. Standart fri-fom bod gɛt difrɛn sɔfa ɛn sɛlular strɔkchɔ ɛn dɛn kin yuz am fɔ print, sayn ɛn jenɛral fabrikeshɔn.
Us saiz na 4×8 PVC fom bod?
Di standad saiz we dɛn rayt na 1220 × 2440mm, we gɛt lɛk 4 fit waid bay et fit lɔng.
Us tik tik dɛn de?
Di kɔrɛnt ditayl prodak-famili spɛsifikɛshɔn de list tiknes frɔm 1mm to 35mm. Kɔnfɛm kɔmɛshɔnal avaylabl fɔ di ɛksaktɔ wayt kɔ-ɛkstrud gred we dɛn nid.
Us density de we de?
Di kɔrɛnt sɔs list 0.35–1.0g/cm³ fɔ di wayda PVC fom-bɔd famili. Di aktual density fɔ wan wayt kɔ-ɛkstrud gred fɔ kɔnfyus akɔdin to aplikeshɔn ɛn tiknes.
Yu tink se dɛn kin yuz wayt kɔ-ɛkstrud PVC bod fɔ kichin kabinɛt?
Yɛs. Kichin kabinet na wan pan di ɔrijinal list aplikeshɔn dɛn. Faynal bod tiknes ɛn density fɔ pik akɔdin to di kabinɛt kɔmpɔnɛnt, hadwae, lod ɛn panɛl dimɛnshɔn.
Yu tink se dɛn kin yuz am fɔ mek batrum kabinɛt?
Yɛs. Washrum kabinɛt dɛn bak de pan di ɔrijinal aplikeshɔn dɛn. Kɔmplit kabinɛt pefɔmɛns dipen pan hadwae, jɔyn, ol, adeziv ɛn instɔleshɔn ɛn bak di PVC panɛl.
Yu tink se PVC ko-ekstrud bod kin bi CNC rout?
Yɛs. I kin evalyu fɔ CNC routin, kɔt, drɔlin ɛn engraving. Prosesin paramita dεm fכ akכnt fכ כl tu di dens sεf εn fכm kכr.
I kin ol skru ɛn kabinɛt hadwɔd?
Di sos list skru fastening as wan avaylabl prɔsesin we. Aktual pefɔmans dipen pan tik, density, skin strɔkchɔ, skru dizayn, payɔt ol, edj distans ɛn lod. Test di aktual bod ɛn hadwae kɔmbaynshɔn.
Yu tink se dɛn kin peint di bod?
Di smol kɔ-ɛkstrud sɔfays kin ɛvaluet fɔ kɔmpitabl pent sistɛm dɛn. Sɔfayz pripiamɛnt ɛn pent kɔmpatibiliti fɔ tɛst pan di aktual prodakshɔn gred.
Yu tink se dɛn kin laminate di fim we dɛn kin yuz fɔ dekɔret to di bod?
Dekorativ-film lamination kin evaluet yuz wan kompitibul adhesive en prodakshon proses. Kɔnfɛm sɔfayz prɛparashɔn, adhesive, tɛmpracha ɛn prɛshɔn rikwaymɛnt bifo bɔlk prodakshɔn.
Yu tink se dɛn kin print di bɔd?
Printin de pan di list bitwin di brayt PVC fom-bɔd aplikeshɔn dɛn. Test di wayt glos ɔ mat sɔfays we yu dɔn pik wit di printa ɛn ink sistem we yu want bifo yu prodyuz bɔku bɔku wan.
PVC ko-ekstrud bod moisture resistant?
Di sɔs fizik-prɔpati tebul de list wata absɔpshɔn na ≤1.5%. Finish kabinɛt ɔ panɛl pefɔmɛns de dipen bak pan jɔyn, ol, hadwae, adeziv ɛn instɔleshɔn.
Yu tink se dɛn kin yuz am na do?
Ɔda wɔl aplikeshɔn dɛn de insay di brayt sɔs infɔmeshɔn, bɔt lɔng tɛm ɛkstirian yus fɔ kɔnfyus fɔ di ɛksaktɔ kɔ-ɛkstrud fɔmyulashɔn, UV ɛksplɔshɔn, kɔlɔ stebiliti ɛn savis kɔndishɔn.
Yu tink se di bɔd nɔ de mek faya?
Di sɔs prodak-famili data de list di we aw pɔsin de biev we i de kil insɛf insay lɛs pas fayv sɛkɔn. If wan rigyuleted projɛkt nid fɔ gɛt wan patikyula faya klasification, aks fɔ di aplikebul tɛst ripɔt fɔ di ɛksaktɔ gred.
Wetin na di MOQ?
Di kɔrɛnt ditayl prodak spesifikeshɔn de list wan minim ɔda kwantiti we na 3 tan.
Yu tink se sampul dɛn de?
Di ɔrijinal prodak infɔmeshɔn de list fri sɛmpul dɛn as dɛn de. Konfam di tiknes, density en surface we yu nid togeda wit di express-freight arenjment.
Us infɔmeshɔn a fɔ gi fɔ kot?
Gi di 4×8 saiz rikwaymɛnt, tiknes, density, wayt sɔfays rikwaymɛnt, glos ɔ mat finish, finish aplikeshɔn, CNC drɔin, hadwae ɔ fastɛns ditil, finish prɔses, kwantiti ɛn dɛstineshɔn.
HSQY Kwalifayeshɔn ɛn Ɛgzibishin Infɔmeshɔn
![HSQY PVC fom bod kwalifayeshɔn infɔmeshɔn]( "HSQY Qualification Information")
HSQY Kwalifayeshɔn Infɔmeshɔn
![HSQY Plastik Grup ɛgzibishin infɔmeshɔn]( "HSQY Exhibition Information")
HSQY Infɔmeshɔn bɔt Ɛgzibishin
PVC fom bod SGS PDF we gɛt di taytul
