PET Tɛmofɔmin

Wetin Na PET Tɛmofɔmin Shit dɛn?

PET thermoforming sheets na rigid plastic sheet ɔ rol dɛn we dɛn mek fɔ ɔt, fɔm oba mold ɛn kol fɔ mek dɛn dɔn pak ɔ industrial kɔmpɔnɛnt dɛn. di kכmכn mεtכd dεm fכ fכm inklud vεkyum fכm, prεshכn fכm, pכlכg-εsist fכm εn mach-mכld fכm.

HSQY de saplae PET shit matirial fɔ thermoforming kɔmni dɛm, fud pak manifakta dɛm, blista pak kɔnvɔta dɛm, printin kɔmni dɛm, industrial kɔmpɔnɛnt prodyusɔ dɛm ɛn ɔlsay distribyushɔn dɛm.

Di matirial opshɔn dɛn we de inklud APET, RPET, PETG, GAG ɛn PET/PE laminated sheet . Ɛni matirial gɛt difrɛn fɔm, klia, ɔt rɛsistɛns, silin, risaykul-kɔntinɛnt ɛn kɔst kwaliti dɛn.

Dis kategori de pe atɛnshɔn mɔ pan PET shit ɛn rol matirial dɛn we dɛn de gi as raw matirial fɔ dawɔnstrim tɛmfɔmin. Dɛn kin tɔk bɔt di it trey, klamshɛl ɛn kɔntena dɛn we dɔn dɔn sɛpret wan akɔdin to di prɔjek.

PET Tɛrmofɔmin Shit Spɛsifikeshɔn dɛn

Di tebul we de kam biɛn ya de sɔmariz di kɔmɔn PET thermoforming sheet opshɔn dɛn. Eksakt spesifikeshɔn dɛn dipen pan di matirial we dɛn dɔn pik, fɔm dip, finish prodak ɛn ɔda kwantiti.

PET Matirial dɛn we De fɔ Tɛmofɔm

PET na matirial famili pas wan singl sheet gred. Fɔ pik di kɔrɛkt PET strɔkchɔ impɔtant fɔ stebul fɔm, finish-pat pefɔmɛns ɛn kɔst kɔntrol.

Di wan dɛn we de bay kin rivyu HSQY dɛn    APET sheet dɛn,    RPET sheet dɛn,    PETG sheet dɛn,    GAG sheet dɛn,    PET/PE laminated sheet ɛn    CPET sheet dɛn.

Ki Bɛnifit dɛn fɔ PET Tɛmofɔmin Shit dɛn

• Ay prodak visibiliti: Klia APET, RPET, PETG ɛn GAG shit dɛn de sɔpɔt transparent rital ɛn it pak.

• Yuzful rigiditi: PET shit kin gi strɔkchɔral sɔpɔt wit rili lɔw matirial wet.

• Gud impak pefɔmɛns: Gred dɛn we dɛn pik fayn fayn wan nɔ kin krak we dɛn de fɔm, handel ɛn transpɔt.

• Thermoforming versatility: PET sheet kin fכm insay shalo trey, dip kaviti, blista, klamshεl, lid εn insεt.

• Surface customization: Anti-fog, anti-statik, mat, silikon, anti-blɔk ɛn print-trit gred dɛn de.

• Di tin dɛn we dɛn kin pik fɔ pak it: Dɛn kin gi gred fɔ kɔntakt it fɔ di aplikeshɔn dɛn we fit fɔ yuz dɛn we dɛn dɔn tɔk bɔt am bifo dɛn mek am.

• Risaykul-kɔntinɛnt opshɔn dɛn: RPET strɔkchɔ dɛn kin sɔpɔt prɔjek dɛn we nid post-kɔnsuma ɔ risaykul PET kɔntinyu.

• Rol ɛn shit saplai: Dɛn kin kɔnfigyut matirial fɔ kɔntinyu ɔtomɛtik fɔm layn ɔ kɔt-shit ikwipmɛnt.

• Kastom dimɛnshɔn: Dɛn kin ajɔst di tik, di waid, di rol dayamita, di sheet lɔng ɛn di pak fɔ di tin dɛn we dɛn nid fɔ mek.

Aplikeshɔn fɔ PET Tɛmofɔmin Shit dɛn

Fɔd Trey ɛn Kɔntinɛnt dɛn

Dɛn kin yuz klia PET sheet bɔku bɔku wan fɔ mek tre ɛn kɔntena fɔ frut, vɛjitebul, bekeri prodak, salad, deli it, mit, sifud, kɔnfɛkshɔn ɛn kol prodak.

Di kɔrɛkt matirial dipen pan if di paket yuz hinged lid, sɛpret lid, strɛch film, ɔt-siling film ɔ ɔda klos sistɛm.

Klamshell we dɛn kin pak

APET ɛn RPET shit dɛn kin thermoformed insay hinged klamshɛl kɔntena fɔ bɛri, tomato, bekeri prodak, hadwae, ilɛktroniks ɛn kɔshɔma guds.

Di hinj trɛnk, kloz dizayn, stak, ventileshɔn ɛn anti-fɔg pefɔmɛns fɔ tink bɔt we dɛn de pik di matirial.

Blister Packaging we dɛn kin yuz fɔ mek tin dɛn

Dɛn kin yuz PET shit fɔ rital blista, fes-sil blista, blista we trɔp, slayd blista ɛn protɛktiv pak fɔ ilɛktronik, hadwae, kɔsmɛtik, steshɔnari ɛn kɔshɔma prɔdak.

Prodakt dip, ɔndakat, flɛnch wit, kad-siling we ɛn anti-statik rikwaymɛnt dɛn de inflɔws di aprɔpriet shit gred.

Di tin dɛn we gɛt fɔ du wit dis de tru HSQY’s    PET blista pakej sheet    kategori.

Mit ɛn Sifud Pakɛj

PET ɛn PET/PE sheet dɛn kin thermoformed insay rigid trey fɔ fresh mit, prosɛs mit, pɔltri, fish ɛn sifud.

Projɛkt dɛn we nid fɔ sial wit ɔt fɔ mach di trey sɔfays wit di kɔrɛkt lidding-film sial layt. High-barrier MAP ɔ VSP aplikeshɔn dɛn kin nid fɔ gɛt EVOH-based multilayer strɔkchɔ pas standad mono-PET.

Mɛdikal ɛn Ɛlthkɛr Pakɛj

PETG ɛn sɔm PET shit dɛn we dɛn dɔn pik kin yuz fɔ divays trey, protɛktiv insɛt ɛn mɛdikal pak kɔmpɔnɛnt usay klia, impak rɛsistɛns ɛn dimɛnshɔnal kɔnsistɛns impɔtant.

Medikal projɛkt dɛn nid aplikeshɔn-spɛsifi k validɛshɔn fɔ sterilayzeshɔn, klin, bayɔkɔmpatibiliti ɛn rigyuletɔri kɔndishɔn dɛn.

Ilɛktronik ɛn Indastrial Trey dɛn

Anti-statik ɔ kɔnduktiv PET shit gred dɛn kin fɔm insay kɔmpɔnɛnt trey, handlin trey, protɛktiv insɛt ɛn pak fɔ ilɛktronik asɛmbli.

Di sɔfayz rɛsistɛns we dɛn nid, klin, dimɛnshɔnal tolɛreshɔn ɛn ilɛktrɔstatik-dischaj pefɔmɛns fɔ spɛsifa bifo dɛn prodyuz.

Ritayl Displei ɛn Protɛktiv Kɔva dɛn

PETG, GAG ɛn tik APET shit dɛn kin fɔm insay transparent displei kɔva, pɔynt-ɔf-sɛl kɔmpɔnɛnt, prodak haus, mashin kɔva ɛn industrial ɛnklɔzhɔ.

Aw fɔ Pik di Rayt PET Tɛmofɔmin Shit

Difayn di Prodak we dɔn dɔn

Start bay we yu no if di matirial go fɔm to it trey, lid, klamshɛl, blista, industrial trey, displei kɔva ɔ ɔda prɔdak. Difrɛn aplikeshɔn dɛn nid difrɛn klia, stiffness, impak, surface ɛn siling prɔpati.

Kɔnfɔm di Fɔm Dip

Shalo prodakt kin yuz standad APET ɔ RPET bɔku tɛm. Dip kaviti, smɔl kɔna, at fɔ drɔ rεshɔn ɔ kɔmpleks shep kin bɛnifit frɔm PETG, GAG, plɔg-ɛsist fɔm ɔ wan modifyed mold dizayn.

Pik di Kɔrɛkt Tiknɛs

Matirial tiknes fɔ pik akɔdin to di fɔm dip, finish wɔl tik, prodak lod, stak rikwaymɛnt ɛn ɛkspɛkt transpɔt kɔndishɔn.

If yu pik di tik we di ɔrijinal sheet tik nɔmɔ, dat kin mek yu nɔ no di tru bikɔs di tin kin tan lɛk se i de strɛch akɔdin to di mold.

Ditarmin If I Nid fɔ Sial wit Ɔt

Standard PET nɔ de sial ɔtomɛtik wan to ɛvri lidding film. Fɔd trey dɛn we dɛn kin sidɔm wit ɔt kin nid PET/PE, wan say we dɛn kɔt ɔ wan liding film we dɛn mek spɛshal fɔ PET.

Kɔnfɛm di Tɛmpratura we dɛn nid fɔ du di Savis

Standart transparent APET na jεnarali sεlekt fכ ambient, frij εn kכvεshכnal it pak pas fכ ovenable yus.

Aplikeshɔn dɛn we gɛt fɔ du wit ɔt filin, pastɔrayzeshɔn, maykrowev, kɔvɛnshɔnal ɔvin ɔ fɔ lɔng tɛm ay tɛmpracha ɛksplɔshɔn fɔ evalyu yuz CPET, ɔt-rɛsistant PP ɔ ɔda fayn matirial.

Identify di Surface Tritment we dɛn nid

Fɔ pak it we dɛn put na frij kin nid fɔ gɛt tritmɛnt fɔ mek dɛn nɔ gɛt fɔg. Di tin dɛn we dɛn print kin nid fɔ gɛt korona tritmɛnt. Fɔm ɔtomɛtik kin nid silikon ɔ anti-blɔk tritmɛnt. Ilɛktronik pak kin nid fɔ du anti-statik ɔ kɔnduktiv.

Spesify Risaykul Kɔntinɛnt

Baya dɛn we nid RPET fɔ tɔk bɔt di risaykul-kɔntinɛnt pasɛnt, optik ɛkspɛkteshɔn, it-kɔntakt kɔndishɔn, kɔlɔ tolɛreshɔn ɛn dɛstineshɔn-maket rikwaymɛnt.

PET Tɛmofɔmin Prɔses

1. Matirial sɛlɛkshɔn: Dɛn kin pik di PET gred, tiknes, wit ɛn sɔfayz tritmɛnt akɔdin to di prodak we dɔn dɔn.

2. Sheet loading: Dɛn kin lod wan rol ɔ kɔt sheet insay di thermoforming mashin.

3. Hɛt: Dɛn kin ɔt di shit te i rich wan fayn fɔm kɔndishɔn we nɔ gɛt bɔku kristalizashɔn, sagging ɔ sɔfays damej.

4. Fɔm: Vaykum, prɛshɔn, wan plɔg ɛp ɔ mach mold dɛn de drɔ di tin we dɛn dɔn ɔt insay di shep we dɛn nid.

5. Kul: Dɛn kin kol di pat we dɔn fɔm we dɛn de ol am agens di mold fɔ mek in dimɛnshɔn dɛn stebul.

6. Demolding: Dɛn kin rilis di pat bay we dɛn de yuz mold draft, air ejection ɔ mɛkanikal ɛp.

7. Trim: Dɛn kin kɔt di wɛb we dɛn dɔn fɔm yuz stɛl-rul day, panch tul, mach-mɛtal tul, CNC ikwipmɛnt ɔ ɔda trim sistem.

8. Inspekshɔn: Dɛn kin chɛk di pat dɛn we dɔn dɔn fɔ si if di wɔl tik, if i klia, if di dimɛnshɔn, krak, wɛb, haz ɛn sɔfays dɛfɛkt.

9. Pak: Dɛn kin put di pat dɛn nɛst, kɔnt, bag, bɔks ɛn palet fɔ shipmɛnt.

Impɔtant tin dɛn we yu fɔ tink bɔt fɔ mek di Tɛmofɔmin Prɔses

Di Tɛmpratura fɔ di Shit

Di korekt fom kondishon dipen pan di PET gred, tiknes, hitin sistem, saikl spid en draw ratio. If yu ɔt pasmak, i kin mek yu sag, stik, kristal, haz ɔ wik eria, we if yu ɔt pasmak, i kin mek di ditel nɔ fayn ɛn krak.

Matirial Mɔstɔ

PET matirial dɛn kin absɔb mɔstɔ we dɛn de kip dɛn. If dɛn nid fɔ drɛy bifo tɛm, i dipen pan di PET gred, di shit istri, di kɔndishɔn fɔ stɔrɔj ​​ɛn di tɛmfɔmin prɔses.

If bɔbul, sɔfayz mak ɔ lɔs fɔ klia tin apin, di wan dɛn we de bay fɔ rivyu di matirial stɔrɔj, mɔstɔ ɛksplɔshɔn ɛn di drying rɛkɛmɔndeshɔn fɔ di patikyula gred.

Dizayn fɔ Mold

Mold dip, kɔna rayus, draft angle, vent-hol saiz, sɔfayz finish, kol ɛn kaviti spays ɔl de inflɔws matirial distribyushɔn ɛn finish-pat kwaliti.

Plɔg-Asist Dizayn

Plɔg ɛp kin mek di wɔl-tiknɛs distribyushɔn bɛtɛ na dip kaviti dɛn. Plɔg matirial, tɛmpracha, spid, shep ɛn kliarens fɔ mach to di mold ɛn PET gred.

Taym fɔ Kɔl

If yu nɔ kol fayn, i kin mek yu nɔ chenj, i kin shrink ɛn i nɔ kin stebul. If yu kol pasmak, i de mek di saykl tɛm ɛn di kɔst fɔ prodakshɔn go ɔp.

We yu de handle di Wɛbsayt

Rol flatnɛs, wayndin tɛnsiɔn, kɔr alaynɛshɔn, shit kɔl ɛn statik kin afɛkt ɔtomɛtik fidin ɛn indeks akkuracy.

Kɔmɔn PET Tɛmofɔmin Prɔblɛm dɛn

PET Tɛrmofɔmin Rol dɛn vs. Kɔt Sheet dɛn

Bayers we nid rol matirial kin rivyu HSQY’s    PET sheet rol dɛn.

Fɔnshɔnal PET Shit Opshɔn dɛn

Anti-Fɔg PET Sheet

Anti-fog tritmɛnt de ɛp fɔ ridyus smɔl smɔl wata drɔp dɛn we kin mek di prɔdak nɔ si di tin dɛn we dɛn dɔn pak na frij.

Anti-fog durability fɔ bi evaluate akɔdin to stɔrɔj ​​tɛmpracha, it mɔstɔ, kɔtin sayd ɛn pak durayshɔn.

Si HSQY in dɛn    anti-fɔg PET sheet dɛn.

Anti-Statik PET Sheet we dɛn kin yuz

Anti-statik tritmɛnt dɛn de ɛp fɔ ridyus di dɔst atrakshɔn ɛn statik akyumyuleshɔn we dɛn de kɔnvɔyt, stɔrɔj ​​ɛn handel kɔmpɔnɛnt.

Silikɔn-Kɔt ɛn Anti-Blɔk PET

Silikɔn ɛn anti-blɔk tritmɛnt kin mek di shit separeshɔn bɛtɛ, di rol unwinding, denest ɛn ɔtomɛtik fidin.

Di tritmɛnt lɛvɛl fɔ balans wit di tin dɛn we dɛn nid fɔ print, kɔt ɛn sial.

PET Sheet we dɛn dɔn trit wit Korona

Korona tritmɛnt de mek di sɔfayz ɛnaji bɔku ɛn i kin mek di ink, kɔtin ɛn adhesive wet fayn. Di wan dɛn we de bay fɔ spɛsifa di sayd we dɛn trit ɛn di sɔfa-tɛnshɔn lɛvɛl we dɛn nid.

Mat ɛn Tekstɔr PET Sheet

Mat ɛn tɛkstɔr sɔfays kin ridyus glare, impɔtant apinans ɔ gi spɛshal taktil ifɛkt fɔ rital ɛn industrial prodak.

Fɔd-Kɔntakt PET Tɛmofɔmin Shit dɛn

Dɛn kin gi it-kɔntakt PET gred fɔ it trey, klamshɛl, lid, bekɛri kɔntena, prodɔkt pak ɛn ɔda aplikeshɔn dɛn we fit fɔ it.

Di wan dɛn we de bay fɔ tɔk klia wan se:

• Di kayn it we dɛn kin it

• Dairekt ɔ indayrɛkt it kɔntakt

• Kontakt tɛm

• Stɔrej ɛn yuz tɛmpracha

• Frij, frɔzɛn, ɔt-fil ɔ rihit kɔndishɔn

• Fɔd we gɛt fat, asid, wata ɔ dray it

• Target kɔntri ɔ rijyɔn

• Diklareshɔn ɔ maykreshɔn tɛst we dɛn nid

• Virgin ɔ risaykul-kɔntinɛnt rikwaymɛnt dɛn

Kɔmplians fɔ kɔnfyus fɔ di ɛksaktɔ rɛsin fɔmyulashɔn, risaykul-kɔntinɛnt strɔkchɔ, kɔtin, adhesive ɛn finish pakej pas fɔ asum fɔ ɛvri PET shit.

PET Tɛmofɔmin Shit Kwaliti Kɔntrol

Stebul shit kwaliti de ɛp thermoforming kɔmni dɛn fɔ mek dɛn kɔntinyu fɔ gɛt kɔnsistɛns ɔt, indeks, fɔm, trim ɛn finish-pat pefɔmɛns.

Di tin dɛn we gɛt fɔ du wit kwaliti-kɔntrol kin inklud:

• Matirial idɛntifikeshɔn ɛn fɔmyulashɔn

• Tik ɛn tik tolɛreshɔn

• Rol ɔ sheet wit tolɛreshɔn

• Sheet flatness ɛn rol winding

• Transparency, haze ɛn glos

• Di kɔnsistɛns we di kɔlɔ dɛn gɛt

• Blak spat, jel, kristal poɛnt ɛn kɔntaminɛshɔn

• Surface skrat ɛn rol impreshɔn

• Korona ɔ kɔtin pefɔmɛns

• Anti-fog ɔ anti-statik pefɔmɛns we nid de

• Fɔm bihayvya ɛn di wɔl-tiknɛs distribyushɔn

• Packaging ɛn palet kɔndishɔn

PET Shit Sastaynabiliti ɛn Risaykul Kɔnsidɛreshɔn

Dɛn kin gɛda ɛn risaykul PET na bɔku makit dɛn, ɛn RPET shit kin put PET we dɛn dɔn risaykul insay nyu pak ɛn thermoformed prodak.

Bɔt di risaykulbiliti fɔ wan finish thermoformed prodakt dipen pan mɔ pas di bays rɛsin.

Impɔtant tin dɛn na:

• Lokal kɔlɛkshɔn ɛn sɔt infrastukchɔ

• Matirial we klia ɔ we gɛt kɔlɔ

• Virgin ɔ risaykul kɔntinyu

• PETG ɔ ɔda kɔpɔliɛsta we de insay

• PE silin layers

• Barɛri layers, kɔtin ɛn adeziv

• Lebul, ink ɛn fim dɛn we dɛn ataya

• Fɔd kɔntaminɛshɔn

• Minimum dimɛnshɔn dɛn we dɛn aksept bay we dɛn de sɔt fasiliti dɛn

Envayrɔmɛnt klem fɔ bi bay di kɔmplit pak strɔkchɔ ɛn di risaykul gayd fɔ di dɛstineshɔn makit.

Kastom PET Tɛmofɔmin Sheet Opshɔn dɛn

HSQY de sɔpɔt kɔstɔmayz PET shit ɛn rol prɔjek fɔ thermoforming manifakta dɛn, fud pak kɔmni dɛn, distribyushɔn ɛn industrial kɔnvɔta dɛn.

• Kastom PET matirial tayp

• Kastɔm ​​vajin ɛn risaykul-kɔntinɛnt rɛsɛshɔn

• Kastom tik ɛn tolɛreshɔn

• Kastom rol wit ɛn wet

• Kastom sheet lɔng ɛn wit

• Kla, tint ɔ opaque kɔlɔ dɛn

• Glossy, mat ɔ tɛkstɔr finish

• Anti-fɔg tritmɛnt

• Anti-statik ɔ kɔnduktiv tritmɛnt

• Silikɔn ɔ anti-blɔk tritmɛnt

• Korona tritmɛnt fɔ print

• Fim we de protɛkt pɔsin na wan ɔ ɔl tu di say dɛn

• PET/PE lamineshɔn ɔ silin layt

• Kastom kor ɛn rol dayamita

• Kastom katon ɛn palet pak

Pakɛj ɛn Intanɛshɔnal Shipin

PET Sheet Rol Paket we dɛn kin yuz fɔ mek tin dɛn

PET rol dɛn kin protɛkt wit wrapping film, kraft pepa, edj protɛkshɔn ɛn ɛkspɔt palet. Dɛn fɔ pik di rol ɔriɛnteshɔn ɛn di palet strɔkchɔ akɔdin to di rol wet ɛn di ikwipmɛnt fɔ ɔndo.

Pakɛj we dɛn kin kɔt-Shit

Dɛn kin put di sheet dɛn we dɛn kɔt, rap dɛn, protɛkt dɛn wit kɔna bod dɛn ɛn pak dɛn na ɛkspɔt palet dɛn. Protektiv film ɔ intaliv pepa kin tɔk bɔt fɔ sɛnsitiv sɔfays.

Di kwantiti fɔ lod di kɔntena dipen pan di matirial dɛnsiti, tiknɛs, di rol wit, di rol dayamita, di dimɛnshɔn fɔ di shit, di ayt we di palet gɛt ɛn di tin dɛn we dɛn nid fɔ go.

Wetin Mek Yu Pik HSQY as Yu PET Tɛmofɔmin Shit Splaya?

• Bɔku PET matirial dɛn: APET, RPET, PETG, GAG, PET/PE ɛn CPET opshɔn dɛn de.

• Kastɔm ​​ɛkstrushɔn: Tik, wit, kɔlɔ, sɔfa ɛn rol kɔnfigyushɔn kin ajɔst.

• Ekspiriɛns fɔ pak it: Matirial dɛn de fɔ tre, klamshɛl, lid, blista ɛn ɔda tin dɛn we dɛn kin pak.

• Fɔnshɔnal tritmɛnt dɛm: Dɛn kin tɔk bɔt anti-fɔg, anti-statik, silikon, anti-blɔk ɛn printin tritmɛnt dɛm.

• Virgin ɛn RPET saplae: Dɛn kin ebul fɔ evalyu difrɛn risaykul-kɔntinɛnt strɔkchɔ dɛn akɔdin to di prɔjek.

• Rol ɛn shit fɔmat: Matirial dɛn kin sɔpɔt ɔtomɛtik rol-fed layn dɛn ɛn kɔt-shit thermoforming ikwipmɛnt.

• Sampul evalueshɔn: Dɛn kin arenj sampul fɔ fɔm, print, sial ɛn vijual-kwaliti tɛst.

• Ɛkspɔt sɔpɔt: Kastɔm ​​pak, paletayz ɛn intanashɔnal shiping opshɔn dɛn de.

• B2B kot sɔpɔt: Dɛn kin rivyu di spɛsifikɛshɔn dɛn akɔdin to di ikwipmɛnt, aplikeshɔn, target kɔst ɛn ɛni ia dimand.

Infɔmeshɔn we dɛn nid fɔ mek wan PET Tɛmofɔmin Shit Kɔt

Fɔ gɛt di kɔrɛkt kot fɔ di faktri, duya gi bɔku pan dɛn tin ya as yu ebul:

• Di kayn PET we dɛn nid: APET, RPET, PETG, GAG, PET/PE ɔ ɔda strɔkchɔ

• Finished prodak ɛn aplikeshɔn

• Rikwayd sheet tik ɛn tolɛreshɔn

• Rol wit ɔ kɔt-shit dimɛnshɔn dɛn

• Rol kor dayamita, maksimal dayamita ɛn maksimal wet

• Klia, tint ɔ opaque kɔlɔ

• Glos, mat ɔ tɛkstɔr sɔfays

• Anti-fɔg, anti-statik, silikon, anti-blɔk ɔ korona tritmɛnt

• Virgin ɔ risaykul-kɔntinɛnt rikwaymɛnt

• Tayp mashin we de mek thermoforming

• Fɔm dip ɛn prodak drɔin

• Vaykum, prɛshɔn ɔ plɔg-ɛsist fɔm we

• Print, kɔt, fold ɔ day-kɔt rikwaymɛnt

• Hɛt-siling ɛn lidding-film rikwaymɛnt dɛn

• Fɔd-kɔntakt ɔ rigyuletɔri rikwaymɛnt dɛn

• Estimated oda kwantiti ɛn ɛni ia yus

• Di we aw dɛn nid fɔ pak di tin dɛn

• Destination port ɔ di adrɛs fɔ di delivri

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt PET Tɛmofɔmin Shit dɛn

Wetin na di difrɛns bitwin PET sheet ɛn PET thermoforming sheet?

PET thermoforming sheet na in dɛn mek ɛn kɔntrol fɔ ɔt ɛn fɔm insay tri-dimɛnshɔnal prodak. Jɛnɛral PET shit kin bi fɔ print, fold, fɔ mek ɔ ɔda tin dɛn fɔ yuz ɛn i nɔ kin gi di sem fɔm pefɔmɛns.

Wetin na di bɛst PET matirial fɔ standad it trey?

Klia APET na tin we dɛn kin pik fɔ kɔvɛnshɔnal it trey bikɔs i de gi klia, rigiditi ɛn ikɔnomik tɛmfɔmin pefɔmɛns. Dɛn kin tink bɔt RPET we dɛn nid fɔ risaykul kɔntinyu.

Us PET sheet na di bɛst fɔ dip thermoforming?

כltεm dεn kin evaluate PETG εn GAG fכ dip כ mכr komplεks shep dεm. Di fainal selekshɔn dipen pan draw ratio, mold jɔyometri, tiknes, mashin tayp ɛn finish-prɔdakt rikwaymɛnt.

Yu tink se yu kin yuz APET sheet na ɔvin?

Standard transparent APET nɔ de fɔ kɔvɛnshɔnal ɔvin yus. Fɔd trey dɛn we dɛn kin ɔvin nɔmal fɔ nid CPET ɔ ɔda matirial we dɛn spɛshal validet fɔ di tɛmpracha we dɛn nid.

Yu tink se dɛn kin put PET thermoforming sheet dɛn na maykrowev?

PET sheet nɔ fɔ bi se i sef na maykrowev pas dɛn dɔn tɛst ɛn gri fɔ di rayt matirial strɔkchɔ, di prodak we dɛn fɔm, di lod we dɛn de it, di tɛmpracha ɛn di tɛm we dɛn de ɔt.

Yu tink se PET sheet nid fɔ drɛy bifo dɛn mek am thermoforming?

Di tin dɛn we dɛn nid fɔ drɛy kin difrɛn bay di kayn PET, di we aw dɛn kin mek di shit, di istri we dɛn kin kip am ɛn di we aw dɛn kin mek am. Fɔ fala di tɛknikal rɛkɛmɔndeshɔn fɔ di gred we yu dɔn pik ɛn invɛstigat di mɔstɔ if bɔbul, haz ɔ sɔfa mak dɛn apia.

Yu tink se dɛn kin gi PET sheet insay rol?

Yɛs. PET thermoforming sheet kin saplae in rol fɔ ɔtomatik fɔm layn dɛn. Di wan dɛn we de bay fɔ gi di wit, tik, di kɔr dayamita, di rol dayamita, di wet we di rol gɛt ɛn di tin dɛn we dɛn nid fɔ waynd.

Yu tink se dɛn kin gi PET sheet as kɔt sheet?

Yɛs. Dɛn kin gi kɔt sheet fɔ tik-gej fɔm, protɔtayp, print, manual fɔm mashin ɛn aplikeshɔn dɛn we nid fiks shit dimɛnshɔn.

Yu tink se PET thermoforming sheet kin bi ɔt sial?

Hεt siling dipεnd pan di PET surface εn lidding-film sialant layt. PET/PE laminated sheet ɔ spɛshal kɔt PET strɔkchɔ kin nid fɔ rili trey siling.

Wetin na di difrɛns bitwin APET ɛn RPET?

APET de diskraib amorphous PET sheet, we RPET de sho PET sheet we gɛt risaykul PET. Wan RPET sheet kin stil gɛt amorphous strɔkchɔ bɔt i inklud wan spɛsifikɛd lɛvɛl fɔ risaykul kɔntinyu.

Wetin na di difrɛns bitwin APET ɛn PETG?

APET na jεnarali sεlekt fכ kכst-εfεktiv klia pak εn kכvεshכnal fכm. PETG nɔmal fɔ gi izi fɔm ɛn bɛtɛ pefɔmɛns fɔ dip ɔ mɔ kɔmpleks shep bɔt i kin gɛt ay matirial kɔst.

Wetin na GAG sheet?

GAG na kɔmɔn wan PETG/APET/PETG kɔɛkstrud shit. di PETG כta layεr dεm de impruv fכm εn sכfayz bihayvya, we di APET kכr de εp fכ kכntrכl mεtirial kכst.

Yu tink se anti-fog PET sheet fɔ ɔltɛm?

Anti-fog pefɔmans dipen pan di kayn tritmɛnt, di sayd we dɛn de kɔt, di humidity, tɛmpracha ɛn di tɛm we dɛn de kip am. Di wan dɛn we de bay fɔ tɛst di sheet wit di rial it ɛn di kɔndishɔn we dɛn pak am.

Yu tink se dɛn kin print PET sheet dɛn bifo dɛn mek dɛn thermoforming?

Yɛs. Dɛn kin print di PET sheet dɛn we dɛn dɔn pik bifo dɛn fɔm, bɔt dɛn fɔ tink bɔt aw fɔ distɔrj di artwok, ink fleksibiliti, sɔfa tritmɛnt, fɔm dip ɛn rɛjista. Dɛn kin advays fɔ mek dɛn tray fɔ mek prodakshɔn.

Yu tink se dɛn kin yuz PET we dɛn dɔn risaykul fɔ pak it?

Dɛn kin yuz RPET strɔkchɔ dɛn we fit fɔ pak it we di matirial, risaykul-kɔntinɛnt sɔs ɛn kɔnstrɔkshɔn de fala di aplikebul dɛstineshɔn-maket rikwaymɛnt dɛn. Dɛn fɔ kɔnfyus di dɔkyumɛnt fɔ di rayt prɔdak.

Yu tink se PET thermoformed prodakt dɛn kin risaykul?

PET prodakt kin bi risaykul usay fayn kɔlɛkshɔn ɛn risaykul infrastukchɔ de. Aktual akseptans dipen pan kɔlɔ, lɛbl, kɔtin, PETG kɔntinyu, PE layers, kɔntaminɛshɔn ɛn lokal risaykul lɔ dɛn.

Wetin kin mek wayt mak afta PET thermoforming?

Wait mak kin kכmכt frכm strεs, strεch pasmak, lכw fכm tεmprachכ, shap mold kכna, kristalizεshכn כ mεtirial damej. Dɛn fɔ rivyu di hita sɛtin, di rayus, fɔm spid ɛn di matirial gred.

Wetin na di MOQ fɔ PET thermoforming sheet dɛn?

MOQ dipen pan di PET tayp, tiknɛs, wit, kɔlɔ, risaykul-kɔntinɛnt rɛsɛshɔn ɛn fɛnshɔnal tritmɛnt. Standard klia spesifikeshɔn dɛn nɔmal fɔ gɛt mɔ fleksibul rikwaymɛnt pas kɔstɔm kɔlɔ ɔ kɔtin.

A kin aks fɔ PET sheet sampul bifo a ɔda?

Yɛs. Dɛn kin tɔk bɔt sampul dɛn fɔ thermoforming, printin, ɔt siling, anti-fɔg, anti-statik ɛn vijual-kwaliti ɛvalueshɔn. Gi di tik, matirial ɛn aplikeshɔn we yu nid we yu de aks fɔ sɛmpul.

Us infɔmeshɔn dɛn nid fɔ rikomɛnd PET sheet?

Gi di prodak we dɔn, di tik we di shit tik, di rol ɔ di shit saiz, dip we di fɔm, di kayn mashin, di tɛmpracha fɔ di savis, di tin we dɛn nid fɔ sial, di tritmɛnt we dɛn nid fɔ sidɔm, di dimand we dɛn kin gɛt ɛvri ia ɛn di say we dɛn de go makɛt.

Rikwest wan PET Tɛmofɔmin Shit Kɔt

Yu de luk fɔ PET thermoforming sheet manifakta, APET rol saplay, RPET sheet ɔlsay ɔ kɔstɔm PET/PE matirial fɔ pak it?

Kɔntakt HSQY fɔ aks fɔ matirial rɛkɛmɔndeshɔn, tɛnki spɛsifikɛshɔn, sampul, kɔstɔm dimɛnshɔn, faktri prayz ɛn intanashɔnal shiping infɔmeshɔn.

       Rikwest fɔ gɛt Kot