PET/PA/PE Lamineshɔn Film

Impɔtant sɛlɛkshɔn not: PET/PA/PE nɔ ɔtomɛtik fayn fɔ ritɔt stɛrilayzeshɔn, mɛdikal stɛrilayzayshɔn ɔ ɛvri it-kɔntakt aplikeshɔn. Di ay-tɛmpracha prɔsesin, fud-kɔntakt kɔmplians, ɔksijɛn transmishɔn rit, wata-vaypa transmishɔn rit ɛn sil pefɔmɛns fɔ kɔnfɔm yuz di fayn spɛsifikɛshɔn ɛn aplikebul tɛst ripɔt.

Rikwest fɔ gɛt Fim Rikɔmɛndishɔn

PET/PA/PE laminated fleksibul pakej film

Daunlod di prɔdak dɔkyumɛnt dɛn we de dɔŋ ya. Kɔnfɛm se ɛni dɔkyumɛnt de mach di fayn layt strɔkchɔ, totɛl tiknɛs, silan gred, printin sistɛm, aplikeshɔn we dɛn bin want ɛn prodakshɔn batch bifo dɛn gri fɔ am.

Daunlod PET/PA/PE Lamineshɔn Film Data Sheet

Daunlod PET/PA/PE Lamineshɔn Film Tɛst Ripɔt

Balans mεkanikal pεrformεns: PET de gi stεbiliti we PA de impruv rεsistεns to pankshכn, fleks εn hεndl damej.

Riliable heat-seal layer: Di PE insay layt kin gi strɔng sil we dɛn pik di kɔrɛkt PE gred ɛn mashin sɛtin.

Klir prodak prɛzɛnteshɔn: Transparent strɔkchɔ kin mek di prɔdak visibiliti, we rivas printin kin protɛkt grafik bitwin fim layers.

Mɔstɔ protɛkshɔn: PE de kɔntribyut wata-vaypa rɛsistɛns fɔ it, likwid ɛn industrial prɔdak dɛm we nid fɔ kɔntrol mɔstɔ.

Impruv pankshכn rεsistεns: Di naylon layεr yusful fכ prodakt dεm we gεt had ed, bon, sεl כ shep dεm we nכ rεgulεr.

Kastom kɔnvɔyt opshɔn dɛn: Wid, tɔtal tik, printin, rol dayamita, kɔr saiz ɛn pak fɔmat kin tɔk bɔt fɔ difrɛn mashin dɛn.

Aplikeshɔn-spɛsifi k injinɛri: Dɛn kin ajɔst di barɛri, sil ɛn tɛmal pefɔmɛns tru matirial gred, layt tik ɛn adhesive sɛlɛkshɔn, bɔt di las pefɔmɛns nid fɔ tɛst.

Vaykum pak: Mit, sifud, chiz, prosɛs it ɛn ɔda prɔdak dɛm we nid fɔ taf, lɔw lik risk ɛn gud sil intɛgriti.

Frɔzɛn it pak: Prodakt dɛn we dɛn put pan lɔw tɛmpracha stɔrɔj ​​ɛn handel, we dɛn kin tɛst fɔ drɔp, fleks-krak ɛn sil.

Liquid ɛn sos pauch: Kɔndimɛnt, sos, drink kɔnsɛntret ɛn ɔda likwid dɛn we di strɔkchɔ validet fɔ prodak kɔmpitibliti ɛn drɔp rɛsistɛns.

Pɛt it we dɛn pak: Wet ɔ sɛmi-mɔs prɔdak, trit ɛn prɔdak dɛn we gɛt shep we nɔ rɛgyula we de bɛnifit frɔm PA pankchɔ rɛsistɛns.

Indastrial pak: Kɔmpɔnɛnt, paoda, kemikal ɔ tɛknikal prɔdak dɛn we nid fɔ protɛkt di mɔstɔ ɛn pak we dɛn sial we go te.

Medikal-divays pak: I pɔsibul ɔl afta dɛn dɔn kɔnfɔm di matirial klin, sterilayz kɔmpatibiliti, sil validɛshɔn ɛn aplikebul rigyuletɔri rikwaymɛnt dɛn.

כksijεn transmishכn rεt (OTR): Stet di valyu we yu nid, tεst tεmprachכ εn rilitiv humiditi.

Wata-vapour transmishɔn rit (WVTR): Tɔk di valyu we dɛn nid ɛn di kɔndishɔn dɛn we dɛn fɔ tɛst.

Sil trɛnk: Difayn di target sil trɛnk, tɛst we ɛn di tɛm we dɛn nid fɔ ol.

Sil initiashɔn tɛmpracha: Kɔnfɛm di lɔs prɛktikal silin tɛmpracha ɛn di silin winda we yu kin yuz.

Bond strכng: Kכnfכm laminεshכn bond strכng, spεshal fכ likwid, vεkyum, frizin כ tεmכl aplikεshכn.

Pankcha ɛn drɔp rɛsistɛns: Gi di pak prodak wet, shep, shap ed ɛn transpɔt kɔndishɔn.

Tɛmral ɛksplɔshɔn: Stet filin tɛmpracha, friz tɛmpracha, pastɔrayzeshɔn, ɔt-fil ɔ sterilizeshɔn kɔndishɔn. Nɔ tek am se standad PE fit fɔ ritɔt prɔsesin.

Atwok: Saplae artwok we yu kin ɛdit, kɔlɔ rɛfrɛns, barkɔd rikwaymɛnt ɛn printin tolɛreshɔn.

Ink ɛn adhesive kɔmpitibliti: Kɔnfɔm resistans to di pak prodak, stɔrɔj ​​kɔndishɔn ɛn ɛni tɛmral prɔses.

Curing: Laminated film fɔ gɛt di adhesive-curing tɛm we dɛn nid bifo dɛn slit, mek pouch, fil ɔ compliance testing.

Surface treatment: Dɛn fɔ kɔnfyus korona tritmɛnt ɛn print-sayd aydentifikeshɔn fɔ kɔnvɔyt.

Maygrɛshɔn ɛn ɔda: Dɛn fɔ evalyu di it ɛn mɛrɛsin aplikeshɔn dɛn bay we dɛn yuz di maykreshɔn, rɛsɛdyual-sɔlvɛnt ɛn ɔda tin dɛn we dɛn nid fɔ smɛl.

1. Pak prodak: Fɔd tayp, likwid, paoda, mɛdikal divays ɔ industrial kɔmpɔnɛnt.

2. Pakɛj fɔmat: Rol stok, vaykum bag, tri-sayd-sil paus, stand-ap paus ɔ ɔda fɔmat.

3. Film dimɛnshɔn: Tɔtɔl tik, rol wit, pauch saiz, rol dayamita, kɔr saiz ɛn wayndin dairekshɔn.

4. Prɔsesin kɔndishɔn: VFFS/HFFS mashin, silin tɛmpracha, filin tɛmpracha, vaykum lɛvɛl, friz, ɔt fil ɔ ɔda tɛmal ɛksplɔshɔn.

5. Pɔfɔmɛnshɔn target: OTR, WVTR, pankchɔ rɛsistɛns, drɔp tɛst, sil trɛnk ɛn shelf-layf target.

6. Print: Nɔmba fɔ di kɔlɔ dɛn, di art wok dɛn, di surface finish ɛn di volyum we dɛn kin gɛt ɛvri ia.

7. Kɔmplians: Destineshɔn makit, fud-kɔntakt rigyuleshɔn, mɛdikal rikwaymɛnt ɔ kɔstɔma-spɛsifi k standad.

8. Kɔmishɔn infɔmeshɔn: Trayal kwantiti, ɛni ia dimand, di delivri dɛstineshɔn ɛn rikwest Incoterm.

Sampul pak: Dɛn kin pak stok sɛmpul ɔ smɔl trayal rol dɛn insay bag ɔ katon we de protɛkt, if dɛn gɛt am.

Rol pak: Yu kin rap rol fɔ protɛkt frɔm mɔs, dɔst ɛn sɔfays damej. Rol wet ɛn dimɛnshɔn fɔ mach di kɔstɔma in handlin ikwipmɛnt.

Palet pak: Dɛn kin yuz ɛkspɔt plai wud palet akɔdin to di rol dimɛnshɔn, lod rikwaymɛnt ɛn dɛstineshɔn rigyuleshɔn.

Kontena lod: Lod kwantiti dipen pan film density, rol dimɛnshɔn, palet kɔnfigyushɔn ɛn ligal wet limit.

Dilivri tɛm: Dɛn kin tɔk bɔt EXW, FOB, CNF ɛn DDU.

Lid tɛm: Di rɛfrɛns prodakshɔn tɛm na lɛk 10–14 dez afta spɛsifikɛshɔn ɛn dipɔsit kɔnfɔmeshɔn. Di tin dɛn we dɛn print ɔ spɛshal tin dɛn kin nid fɔ gɛt mɔ tɛm.

Wetin na PET/PA/PE lamineshɔn fim?

PET/PA/PE lamination film na wan multilayer fleksibul pak matirial. PET de gi printabiliti ɛn dimɛnshɔnal stebiliti, PA de gi tafnɛs ɛn pankchɔ rɛsistɛns, ɛn PE de gi mɔstɔ rɛsistɛns ɛn ɔt silin.

Wetin dɛn kin yuz PET/PA/PE fim fɔ?

Dɛn kin kɔmɔn fɔ evalyu am fɔ vaykum pak, frɔzɛn it, likwid ɔ sos paus, pet it, print rol stok ɛn industrial pak. Dɛn fɔ pik di rayt strɔkchɔ akɔdin to di prɔdak we dɛn pak ɛn di we aw dɛn de du am.

PET/PA/PE fim na fim we gɛt ay barɛri?

I kin gi impɔtant gas ɛn mɛkanikal protɛkshɔn we yu kɔmpia am wit simpul PE ɔ PET/PE strɔkchɔ dɛn, bɔt di frayz 'high barrier' fɔ sɔpɔt bay target OTR ɛn WVTR valyu dɛn. Prodakt dεm we rili כksijεn sεnsitiv kin nid EVOH, PVDC, AlOx, mεtalayz film כ aluminiכm fכyl.

Yu tink se dɛn kin yuz PET/PA/PE fim fɔ pak vaykum?

Yes, dεn kin yuz fayn strכkchכ dεm fכ vaykum pak biכs PA de impruv tכf εn pankshכn rεsistεns we PE de gi di siling layεr. Dɛn fɔ tɛst di tik we di film tik, di vaykum lɛvɛl, di ed dɛn we di prɔdak gɛt ɛn di trɛnk we di sil gɛt.

Yu kin yuz PET/PA/PE film fɔ frɔzɛn it?

I kin fayn fɔ frɔzɛn it we di PA, PE, adeziv ɛn tɔtal strɔkchɔ we dɛn dɔn pik de mentɛn impak rɛsistɛns, sil intɛgriti ɛn fleks-krak rɛsistɛns na di stɔrɔj ​​tɛmpracha we dɛn nid.

PET/PA/PE film fit fo retort pouch?

Nɔto ɔtomɛtik wan. Standard PE sialant layers kin nɔ fayn fɔ retort sterilization. Wan retort aplikeshɔn nid fɔ gɛt spɛshal ɛnjinia ɛn validet strɔkchɔ, bɔku tɛm dɛn kin yuz wan silan we nɔ de ɔt lɛk retort-grɛd CPP ɔ ɔda tin we dɛn dɔn gri fɔ.

PET/PA/PE film fud sef?

Fɔd-kɔntakt suitability dipen pan di ɛksaktɔl rɛsin, ink, adeziv, aditiv ɛn dɛstineshɔn-maket rigyuleshɔn. Rikwest fɔ gɛt fud-kɔntakt diklareshɔn ɛn aplikebul maykreshɔn ɔ kɔmplians tɛst ripɔt fɔ di fayn strɔkchɔ. RoHS nɔmɔ nɔto fɔ it-kɔntakt aprɔval.

Us tik ɛn waid dɛn de?

Di ɔrijinal prodak spesifikeshɔn de list di wit frɔm 160mm to 2600mm ɛn totɛl tiknɛs frɔm 0.045mm to 0.35mm. Faynal avaylabl dipen pan layt dizayn, printin, slit ɛn prodakshɔn rikwaymɛnt.

Yu tink se dɛn kin print PET/PA/PE fim bay dɛnsɛf?

Yɛs. Yu kin tɔk bɔt kɔstɔm printin fɔ rol stok ɛn kɔnvɔyt pauch dɛn. Gi artwok, kala kɔnt, printin eria, surface finish, rol dairekshɔn ɛn ɛni ia volyum fɔ evalueshɔn.

Us infɔmeshɔn dɛn nid fɔ kɔl di shelf layf?

Gi di prodak in ɔksijɛn ɛn mɔstɔ sɛnsitiviti, target shelf layf, filin prɔses, stɔrɔj ​​tɛmpracha, pakej dimɛnshɔn, edspɛs, OTR, WVTR ɛn siling kɔndishɔn. Dɛn nɔ go ebul fɔ tɔk kɔrɛkt wan bɔt di layf we di tin go liv frɔm di tin in nem nɔmɔ.

Yu kin yuz PET/PA/PE film pan VFFS ɔ HFFS mashin dɛn?

Yɛs, dɛn kin mek fayn rol stok fɔ vertikal ɔ ɔrizɔntal fɔm-fil-sil mashin dɛn. Mashin mɔdel, fɔm we, siling-jaw tayp, spid, rol dimɛnshɔn, rɛjista rikwaymɛnt ɛn unwind dairekshɔn fɔ de.

Yu tink se sampul dɛn de?

Stok sɛmpul ɔ trayal matirial kin de fɔ chɛk aw i luk, di kwaliti fɔ print, fɔ sidɔm, fɔ mek i nɔ panch ɛn fɔ mek di mashin kɔmpitishɔn. Kɔriɔ kɔst ɛn kɔstɔm trayal kɔndishɔn fɔ kɔnfɔm wit HSQY.

Wetin na di MOQ fɔ PET/PA/PE lamineshɔn fim?

Di listed standad MOQ na 1,000kg. Kastom printin, spɛshal rɛsin gred, ɔnusual wit ɔ aplikeshɔn-spɛsifi k strɔkchɔ kin nid difrɛn minim kwantiti.

Aw a go aks fɔ kot?

Send di pak prodak, film ɔ pauch dimɛnshɔn, tik, kwantiti, printin rikwaymɛnt, mashin tayp, filin ɛn stɔrɔj ​​kɔndishɔn, barɛri target, dɛstineshɔn makɛt ɛn delivri pɔt tru di HSQY kɔntakt pej.

HSQY Plastic Group de saplae fleksibul pakej film ɛn plastic shit prodak to intanashɔnal kɔnvɔta, fud manifakta, pak distribyushɔn ɛn industrial kɔstɔma dɛn.

Sɔpɔt kin inklud strɔkchɔ diskishɔn, kɔstɔm wit ɛn tik, print rol stok, sampul ɛvalueshɔn, tɛknikal dɔkyumɛnt rivyu, ɛkspɔt pak ɛn bɔlk prodakshɔn.

Fɔ gɛt kɔrɛkt rɛkɛmɔndeshɔn, gi di barɛri, sil, mashin ɛn kɔmplians rikwaymɛnt dɛn we yu kin mɛzhɔ instead fɔ jɔs aks fɔ wan jenɛrik PET/PA/PE strɔkchɔ.

Rikwest fɔ Kot ɛn Sampul