High-kwaliti Manual Hɛt-silin Fud tre Sila Mashin

Fɔd we pɔsin kin yuz fɔ it Mashin fɔ Sial Tray

HSQY manual fud tre siling mashin na kɔmpakt tebultɔp ɔt sila we dɛn mek fɔ rɛstɔrant, tek-away shɔp, ketɛn kichin, it-prɛp biznɛs, grosa stɔ ɛn smɔl fud prɔsesɔ. Di ɔpreshɔn lod di tre ɛn manually ɔpreshɔn di siling mɛkanism, we di ɔt ɛn prɛshɔn bond kɔmpitabl lidding film to di tre flɛnch.

Di HS-2, HS-4 ɛn HS-6 siriɔs sɔpɔt difrɛn tre saiz ɛn rol-film wit. Dipen pan di mɔdel we yu dɔn pik, maksimal rol-film wit de frɔm 180mm to 265mm ɛn maksimal listed tre saiz de rich 300 × 220 × 100mm.

Di mashin kin kɔnfigyut fɔ PP, PET , APET ɛn CPET it trey dɛn we di tre flɛnch, silin mold, lidding-film silan layt, silin tɛmpracha ɛn di tɛm we dɛn de de, mach kɔrɛkt wan. Kastom mold dɛn de fɔ difrɛn tre dimɛnshɔn ɛn kɔmpawtmɛnt layout.

Manual Mashin fɔ Sial Tray Pikchɔ dɛn

Fɔd Mashin fɔ Sial Tray Katalog

Daunlod di HSQY it tre siling mashin katalog fɔ kɔmpia manual, sɛmi-ɔtomɛtik ɛn ɔda tre siling ikwipmɛnt.

Wetin Na Manual Tray Sealer Machine?

Manual tre sila na ɛntri-lɛvɛl it pak mashin we dɛn kin yuz fɔ ɔt-sial rol liding film pan it we dɛn dɔn mek bifo tɛm trey dɛn . Di ɔpreshɔn de put di tre wit in an insay di mold ɛn ɔpreshɔn di handel ɔ lev fɔ kɔmplit di silin saykl.

Manual tre siling ikwipmɛnt na patikyula yusful we fud biznɛs gɛt bɔku menyu aytem bɔt rili mɔdest prodakshɔn volyum. I de gi mɔ kɔntrol ɛn ripit tre silin pas kɔmplit han-aplai pak we nɔ nid fɔ invɛst ɔ flɔ spɛs fɔ wan sɛmi-ɔtomɛtik ɔ ɔtomatik tre silin layn.

Dis HSQY siris na fɔ standad ɔt silin. I nɔ fɔ kɔnfyus wit MAP , vaykum ɔ vaykum-skin pak mashin dɛn, we nid dediket vaykum, gas-flush ɔ skin-pak sistem.

Manual Tray Sealer Mashin Spesifikasi

Di sɔs spɛsifikɛshɔn de list 480 bɔks/awa fɔ Ɔtput 1 ɛn 800 bɔks/awa fɔ Ɔtput 2. Aktual truput dipen pan di ɔpreshɔn spid, tre lod, tre dimɛnshɔn, mold kɔnfigyushɔn, silin tɛmpracha ɛn di tɛm we dɛn de de. Di kɔrɛnt sɔs nɔ de gi di kɔrɛspɔndɛns maksimal tre dimɛnshɔn fɔ Ɔtput 2, so dɛn fɔ kɔnfyus dɛn tin ya bifo dɛn ɔda wan mɔlti-kaviti mold.

HS-2 vs HS-4 vs HS-6 manual trey sila

Aw wan Manual Fud tre Sila De Wok

1. Put di Fud tre na di Mold

Put di it we ful-ɔp tre insay di dediket tre mold. Di mold fɔ sɔpɔt di tre kɔrɛkt wan ɛn mach in ɛksternal dimɛnshɔn, flɛnch jɔyometri ɛn kɔna rayus.

2. Pozishɔn di Lidding Film

Pul di rol lid film oba di tre ɛn mek shɔ se di film kɔba di silin flɛnch kɔmplit wan.

3. Opereyt di Manual Handle

Lɔs ɔ ɔpreshɔn di manual lev akɔdin to di mashin dizayn. Di ɔt silin plet de aplay ɔt ɛn prɛshɔn fɔ aktiv di film silin agens di tre flɛnch.

4. Kɔmplit di Hɛt-Silin Saykl

Hol di siling mechanism fɔ di tɛm we yu nid fɔ de. Kɔrɛkt silin tɛmpracha ɛn tɛm dipen pan di tre matirial, lidding-film sial ɛn pakej dizayn.

5. Rimov ɛn Inspɛkt di Trey we Dɛn Sial

Rilis di handel, pul di paket ɛn inspɛkt di say we dɛn sial fɔ sial we nɔ kɔmplit, wrinkles, kɔntaminɛshɔn ɔ film-kat dɛfɛkt bifo yu stat di nɛks saykl.

Kɔmpatibl Fud tre Matirial dɛn

HSQY de saplae bak            APET it trey dɛn        ɛn            CPET trey dɛn        fɔ kɔmpitabl it-pak projɛkt dɛn.

Aw fɔ Pik di Kɔrɛkt Lidin Fim

Di siling mashin, tre ɛn film fɔ trit lɛk wan pak sistɛm. Wan manual tre sila nɔ kin ebul fɔ mek wan rilibul sil we di lidding-film sial nɔ kɔmpitabl wit di tre sɔfays.

Impɔtant fim paramita dɛn inklud rol wit, rol dayamita, film tik, silin layt, silin-tɛmpracha winda, izi-pil ɔ lɔk-sil rikwaymɛnt, anti-fɔg pefɔmɛns ɛn if di fim print ɔ nɔ print.

HS-2 sɔpɔt wan maksimal listed film width we na 180mm, HS-4 sɔpɔt 220mm ɛn HS-6 sɔpɔt 265mm. Ɔl di tri mɔdel dɛn list wan maksimal rol-film dayamita we na 180mm.

Kastɔm ​​Trey Siling Mold dɛn

Ɛni tre fɔmat nid fɔ gɛt mold we de sɔpɔt di tre fayn fayn wan ɛn we de fala in silin flɛnch. Di maksimal tre dimɛnshɔn dɛn na di mashin tebul de difayn di jenɛral mashin ɛnvilɔp bɔt nɔ min se ɛvri tre dɔŋ dɛn dimɛnshɔn dɛn de go fit wan mol we dɔn de.

HSQY kin tɔk bɔt kɔstɔm mold dɛn akɔdin to tre lɔng, wit, dip, kɔna rayus, flɛnch wit ɛn kɔmpawtmɛnt layout. Wan tre drɔin ɔ fizik tre sampul na in dɛn kin rikɔmɛnd bifo dɛn prodyuz mold.

Baya dɛn we de yuz sɔm tre saiz dɛn fɔ spɛsifa ɛvri fɔmat bifo tɛm so dat dɛn go ebul fɔ evalyu di nɔmba we dɛn nid fɔ di mol dɛn ɛn di chenj we dɛn de op fɔ chenj di mashin bifo dɛn bay di mashin.

Ki Ficha dɛn fɔ di Manual Tray Sealer

Manual Leva Opareshɔn

Di ɔpreshɔn de kɔntrol di tre lod ɛn silin muvmɛnt wit in an, we de ridyus di mashin kɔmplisiti ɛn mek di ikwipmɛnt fayn fɔ ɛntri-lɛvɛl it-pak ɔpreshɔn.

Kompakt Tebultɔp Dizayn

Di wet fɔ di ikwipmɛnt de frɔm lɛk 13.5kg to 23kg. Di kɔmpakt futprin de mek di siriɔs wan rili impɔtant to rɛstɔrant dɛn, deli kɔnta dɛn, ples fɔ pripia fɔ it ɛn smɔl prodakshɔn rum dɛn we gɛt smɔl ples.

Temperature fɔ sial we yu kin ajɔst

Adjɔstabl ɔt sɛtin dɛn de alaw di ɔpreshɔn fɔ mach difrɛn tre -film kɔmbaynshɔn dɛn. Faynal setin fɔ establish tru siling trayal pas fɔ yuz wan tɛmpracha fɔ ɛvri matirial.

Low Rated Pawa we dɛn dɔn rayt

Di pawa we dɛn rayt naw de frɔm 0.6kW fɔ HS-2 to 1.0kW fɔ HS-6, we de sɔpɔt kɔmpakt ɛvride fudsavis ɛn smɔl-prɔdakshɔn aplikeshɔn dɛn.

Strukchɔ we dɛn mek wit stenlɛs-Stiɛl

Di ɔrijinal prodak spesifikeshɔn de diskrayb wan stenlɛs-stiɛl strɔkchɔ we dɛn mek fɔ sɔpɔt hajɛns klin ɛn kɔrɛshɔn rɛsistɛns insay fud-pak ɛnvayrɔmɛnt.

Manual vs semi otomatik Mashin fɔ Sial Tray

If yu prodakshɔn volyum nid fɔ gɛt mɔ ɔtomatik film fidin ɛn sial, si di HSQY            Semi Otomatik Fɔd Mashin fɔ Sial Tray    .

Aplikeshɔn fɔ Manual Fud tre Sila dɛn

Takeaway ɛn Delivery Meals fɔ it

Rɛstɔrant ɛn tek-away shɔp dɛn kin yuz manual tre sila fɔ rays it, pasta, nuts, dish dɛn we dɛn dɔn pripia, lanch trey dɛn ɛn ɔda it pakej dɛn we nid fɔ gɛt fim we dɛn sial pan tap.

Meal Prep ɛn rɛdi it dɛn

Meal-prep biznɛs kin sial portion-controlled PP ɔ CPET trey dɛn fɔ friji, frɔzɛn ɔ rihitabl it program dɛn we di kɔmplit tre -film pakej dɔn validet.

Fresh Mit ɛn Sifud

Fresh mit ɛn sifud kin top sial fɔ sɔm aplikeshɔn dɛn. If di shelf-layf sistem we dɛn nid de yuz modifyed atmosfɛs pak, dɛn fɔ pik wan dediket MAP mashin ɛn di rayt barɛri tre -film sistem insted.

Ketin ɛn Fɔdsavis

Di kɔmpakt mashin fɔmat fayn fɔ ketɛn kichin, ɔfis it, institiushɔnal fudsavis, skul- it pripia ɛn smɔl sɛntral kichin.

Fɔd dɛn we dɛn dɔn kol ɛn we dɛn dɔn frɔz

Chil ɛn frɔzɛn it trey dɛn kin sial we tre matirial, liding film, siling trɛnk, friz kɔndishɔn ɛn rihit rikwaymɛnt dɛn mach fayn fayn wan.

Wetin Afɛkt Trey Sil Kwaliti?

Klin ɛn Mentɛnans ɛvride

Diskonɛkt di pawa ɛn alaw di tin dɛn we dɔn ɔt fɔ kol bifo yu klin. Rimov di it we lɛf frɔm di tre mold, di wok say we de rawnd am ɛn di say dɛn we pɔsin kin ebul fɔ go na di mashin akɔdin to di mashin instrɔkshɔn dɛn.

Nɔ yuz agresiv kemikal dɛn we kin pwɛl ilɛktrik kɔmpɔnɛnt dɛn, kɔtin dɛn, sil ɔ plastic pat dɛn. Nɔ sprɛy wata dairekt insay ilɛktrik kɔntrol pas di patikyula mashin dizayn alaw klia wan fɔ was am.

Ɔltɛm inspɛkt di silin sɔfays, mold, kɔt kɔmpɔnɛnt dɛn, pawa kebul ɛn manual mɛkanism. Dɛn fɔ chenj di komponent dɛn we dɔn pwɛl we de silin ɔ kɔt bifo dɛn bigin fɔ afɛkt di kɔnsistɛns we di paket gɛt.

Infɔmeshɔn we Yu nid fɔ mek yu gɛt Manual Tray Sealer Quote

• Trey matirial: PP, PET , APET , CPET ɔ aluminiɔm.

• Trey lɔng, wit ɛn dip.

• Tray flange dimensions ɛn kɔna rayus.

• Wan-kɔmpatmɛnt ɔ bɔku-kɔmpatmɛnt tre .

• Trey drɔin ɔ fizik sampul dɛn.

• Width we dɛn nid fɔ mek di rol-film.

• Lidding-film strɔkchɔ.

• I izi fɔ pul ɔ lɔk-sil rikwaymɛnt.

• Fɔd prodak ɛn stɔrɔj ​​kɔndishɔn.

• Rikwayd autput fɔ wan awa.

• Wan- tre ɔ mɔlti- tre mold rikwaymɛnt.

• Nɔmba fɔ tre fɔmat dɛn.

• Lokal vɔlɔt, frikshɔn ɛn plɔg standad.

• Di kɔntri we yu want fɔ go ɛn di tin dɛn we yu fɔ du fɔ ship.

Sɛtifiket dɛn ɛn Sɔpɔt Dɔkyumɛnt dɛn

Di sɛtifiket imej we de dɔŋ ya, dɛn kip am frɔm di ɔrijinal prɔdak pej. Bifo yu bay di ikwipmɛnt, kɔnfɔm di kɔrɛnt sɛtifiket vɛshɔn, skɔp, ɔganayzeshɔn we de gi ɛn if di dɔkyumɛnt aplay spɛshal to di HS-2, HS-4 ɔ HS-6 mashin we yu dɔn pik.

Jɛnɛral ISO ɔ SGS dɔkyumentri nɔ fɔ trit as sɔbstityuyt fɔ mɔdel-spɛsifi k ilɛktrik ɔ mashin kɔmplians we dɛn nid na di dɛstineshɔn makit.

HSQY Plastik Grup Globɛl Ɛgzibishin dɛn

HSQY kin mit pipul dɛn we de prosɛs it, distribyushɔn ɛn pipul dɛn we de bay pak na intanashɔnal ɛgzibishin fɔ tɔk bɔt it trey dɛn , lidding film, manual tre sila ɛn kɔmplit fud-pak projɛkt.

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm Bɔt di Manual Tray Sealers

Wetin dɛn kin yuz manual fud tre silin mashin fɔ?

I de yuz fɔ ɔt-sial kɔmpitabl lidding film pan prɛfɔm it trey dɛn fɔ tek-away it, rɛdi it, deli it, ketɛning, kol it ɛn ɔda smɔl-smɔl it-pak aplikeshɔn dɛn.

Udat fɔ yuz manual tre sila?

Manual mashin dɛn kin fayn mɔ fɔ rɛstɔrant, tek-away biznɛs, grosa, ketɛning kɔmni, it-prɛp statap ɛn smɔl fud prɔsesɔ wit rili mɔdest pak volyum.

Us tre matirial dɛn di mashin kin sial?

Di sɔs infɔmeshɔn de list PET , PP ɛn CPET kɔmpitibliti, ɛn sɛlɛkɛt aluminiɔm aplikeshɔn dɛn kin pɔsibul bak dipen pan di mɔdel. Ɛvri tre nid fɔ gɛt fayn mold ɛn kɔmpitabl lidding-film siling layt.

Wetin na di maksimal tre saiz?

HS-2 sɔpɔt wan list maksimam fɔ 240 × 150 × 100mm, HS-4 te to 260 × 190 × 100mm ɛn HS-6 te to 300 × 220 × 100mm fɔ Ɔtput 1.

Aw fast di manual tre sila de?

Di spɛsifikɛshɔn dɛn we de naw de list 480 bɔks/awa fɔ Ɔtput 1 ɛn 800 bɔks/awa fɔ Ɔtput 2. Dis na rɛfrɛns figa dɛn; rial prodakshɔn dipen pan mold kɔnfigyushɔn, ɔpreshɔn lod spid ɛn silin-saykl sɛtin.

Wan manual tre sila kin yuz difrɛn tre saiz?

Yes, difrεn tre saiz dεm kin kכnsidrε if dεn fit insay di mashin limit εn di kכrekt intachεnj mכld de. Send tre drɔin ɔ sampul bifo yu ɔda ɔda mold dɛn.

Us kayn fim dɛn kin yuz wit manual tre sila?

Di korekt lidding film dipen pan di tre siling surface. Opshɔn dɛn kin inklud PET -based, PE-silant ɛn multilayer film, bɔt di ɛksaktɔ sialant layt fɔ kɔmpitabl wit di tre .

I kin yuz fim fɔ lid we izi fɔ pul?

Yes, provid di izi-pil film spεshal we dεn mek fכ sial to di tre strכkchכ εn i de wok insay di mashin in sial-tεmpratura rεnj.

Yu tink se di mashin de gi pak tin dɛn we nɔ de lik?

Wan fayn mach tre , film ɛn siling prɔses kin gi strɔng paket sil, bɔt kɔmplit lik-pruf pefɔmɛns nɔ fɔ asum if dɛn nɔ tɛst am. Sil integriti fɔ validet wit di aktual it, tre , film ɛn handel kɔndishɔn.

Dis manual mashin de sɔpɔt MAP ?

Di HS-2, HS-4 ɛn HS-6 spɛsifikɛshɔn dɛn na dis pej nɔ de list vaykum ɔ gas-flush ikwipmɛnt. So dɛn fɔ trit dɛn lɛk standad ɔt-silin mashin pas MAP tre sial.

Ustɛm a fɔ ɔpgrɛd to sɛmi ɔtomɛtik mashin?

Tink bɔt wan sɛmi ɔtomɛtik mashin we manual lod ɛn siling bi prodakshɔn bɔtulnɛk, leba kɔnsistɛns kin bi at ɔ yu ɛvride autput nid mɔ ɔtomatik film fidin ɛn siling.

Us vɔlɔt di mashin de yuz?

Di kɔrɛnt HS-2, HS-4 ɛn HS-6 spesifikeshɔn dɛn de list 220V / 50Hz. Di wan dɛn we de bay fɔ kɔnfɔm di vɔlɔt, frikshɔn ɛn plɔg we dɛn nid fɔ dɛn kɔntri bifo dɛn ɔda.

HSQY kin saplae trey dɛn en lidding film wit di mashin?

HSQY de saplae PP, PET ɛn CPET it trey dɛn , lidding film ɛn tre siling ikwipmɛnt, we de alaw di wan dɛn we de bay fɔ evalyu di tre , film, mold ɛn mashin as wan pak sistɛm.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Duya gi tre matirial, ekstenal tre dimɛnshɔn, flɛnch dimɛnshɔn, tre drɔ ɔ sampul, lidding-film tayp, rikwayd awa autput, nɔmba fɔ tre fɔmat, vɔlɔt, plɔg tayp ɛn dɛstineshɔn kɔntri.

Wetin mek yu fɔ bay wan Manual Trey Sealer frɔm HSQY?

HSQY de saplae manual ɛn semi ɔtomɛtik tre siling ikwipmɛnt togɛda wit it trey dɛn ɛn kɔmpitabl lidding-film sɔlvishɔn. So di wan dɛn we de bay kin tɔk bɔt tre dimɛnshɔn, fim silin pefɔmɛns, mold ɛn ikwipmɛnt insay di sem pak projɛkt.

Send HSQY yu it tre drɔ ɔ sampul, tre matirial, fim rikwaymɛnt ɛn prodakshɔn target. Wi tim kin ɛp fɔ kɔmpia HS-2, HS-4 ɛn HS-6 ɛn no wan fayn manual tre silin kɔnfigyushɔn.