Dumunifɛnw sanubɔlan sirilan min ka ɲi kosɛbɛ ni bolo ye

  Télécharger Dumuni sanubɔlan sirilan   

Paramètre technique	Manuel Tray Sigili Masiniw
Mɔdɛli	HS-2 ye	HS-4 ye	HS-6 ye
Roul film (militiri) bonya hakɛ maksimali .	180	220	265
Roul film (mm) janya hakɛ min ka bon kosɛbɛ .	180	180	180
Seko (kɛsu/lɛrɛ) bɔli 1	480	480	480
Seko (kɛsu/lɛrɛ) bɔli 2	800	800	800
Kuran dilancogo (v/hz) .	220/50 ye	220/50 ye	220/50 ye
Fanga bɛɛ lajɛlen (kw) .	0.6	0.8	1
Minɛnw girinya (kg) .	13.5	15.6	23
Minɛnw hakɛ L × W × H(mm) .	630×295×270 ye	660×330×290 ye	710×375×290 ye
Foroko girinya bɛɛ lajɛlen (kg) .	19	22	30
Box de paquet taille L × W × H(mm) Bamako, Mali.	610×310×310 ye	630×350×310 ye	685×395×310 ye
Sani hakɛ min ka bon kosɛbɛ (mm) ka bɔ 1 la	240×150×100 ye	260×190×100 ye	300×220×100 ye

1. Bolo baara ni levier walima bolola-sigilan ye; otomatiki si mago tɛ o la.

2. Tabali dilanni min ka surun, o bɛ yɔrɔ lakana, wa a dafalen don dumunikɛyɔrɔ misɛnninw kama.

3. Funteni hakɛ min bɛ se ka ladilan, o bɛ sanubɔlan suguya caman dɛmɛ, i n’a fɔ PET, PP ani CPET.

4. Ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ walasa ka bɛn sanubɔlan hakɛw ni yɔrɔw labɛncogo wɛrɛw ma.

5. Nɛgɛdaga min bɛ mɛn, o saniyalen don, wa a tɛ se ka sɔgɔ.

6. Kuwati dɔgɔyali bɛ baarakɛcogo ɲuman sabati don o don baara la.

• Dumuni minnu bɛ taa ni u ye ani minnu bɛ taa ni u ye

• Dumuni kura foroko (sogo, kɔgɔjilafɛnw, nakɔfɛnw) .

• Dumuni labɛnnenw ani dumuni labɛnni baarakɛyɔrɔw

• Avion baarakɛlaw ka dumuniko ni dumuniko baara

• Dumuni foroko minnu bɛ kɛ nɛnɛ na ani minnu nɛnɛna

Bololabaarakɛlaw ka sanubɔlanw bɛ dumuni funteni ni dumuni nɛnɛmaw bɛɛ ladon, wa a ka ca a la, u bɛ kɛ ni u ye APET ni CPET sanubɔlanw.

1. Bololabaarakɛminɛn min bɛ kɛ ka sanubɔlan datugu, o bɛ kɛ mun na?

Bololabaarakɛminɛn min bɛ sanubɔlan datugu, o bɛ pakew di minnu tɛ fiɲɛ bila, minnu tɛ se ka bɔn, walasa ka taa ni u ye, dumuni labɛnnenw, fɛn dilannenw ani dumuniw kama.

2. Jɔn ka kan ka baara kɛ ni bololabaarakɛminɛn ye min bɛ sanubɔlan datugu?

Bololabaarakɛlaw ka sanubɔlanw dafalen don:

* Restoranɛ misɛnninw ani dumunifɛnw feereyɔrɔw

* Dumunikɛyɔrɔ jagokɛlaw

* Dumunifeerelaw ni dumunifeerelaw

* Daminɛw ni dumuniko tɔn misɛnninw

3. Sani suguya jumɛnw bɛ se ka kɛ ni bolola sanubɔlanw ye?

Aw bɛ se ka baara kɛ ni bololabaarakɛminɛnw ye minnu bɛ sanubɔlanw datugu ni sanubɔlan caman ye, i n’a fɔ PET (Polyethylene Terephthalate), PP (Polypropylène), CPET (Crystallized PET), ani, misali dɔw la, aliminiyɔmu sanubɔlanw.

Dilanbagaw bɛ sanubɔlanw dilan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ni mɔbiliw ye minnu bonya ni u cogoya tɛ kelen ye.

4. Filimu sugu jumɛn bɛ kɛ ka sanubɔlan datugu?

Filimu minnu bɛ kɛ ka fɛnw datugu tuma caman na, olu dɔw ye:

* PET sigili filimu

* PE (Polyethylene) filimu

* Barrière films multi-layer (ka u marali waati janya) .

Aw bɛ aw ka filimu sugandi ka kɛɲɛ ni sanubɔlan fɛnw ni a foroko wajibiyalenw ye.

5. Nafa jumɛnw bɛ bololabaarakɛlaw ka sanubɔlan datugulan na?

* Daminɛ musaka ka dɔgɔ

* Baarakɛcogo nɔgɔman ni degeliw fitinin ye

* A dilanni min bɛ yɔrɔ tiɲɛ ani min ka surun

* A bɛ se ka ladamu ka kɛɲɛ ni sanubɔlan suguya wɛrɛw ye

* A bɛ ladonni dɔɔnin de wajibiya

6. Bololabaarakɛminɛn minnu bɛ kɛ ka sanubɔlanw datugu, olu nafa ye jumɛnw ye?

* Ka fɛn dilanni teliya dɔgɔya

* Baarakɛcogo min bɛ kɛ ni baara caman ye

* A man ɲi ka baara kɛ ni izinibaw ye

Aw mago bɛ ka dumuni hakɛ caman datugu wa? Masina minnu bɛ se ka kɛ otomatiki tilancɛ ye walima minnu bɛ kɛ otomatiki la, olu bɛ se ka kɛ fura ye walasa ka dɔ fara u ka baara kɛcogo kan ani u ka baarakɛcogo ɲuman kan.

7. Yala bolola sanubɔlanw bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Ɔwɔ, fɛn dilannikɛlaw bɛ ninnu di:

* Ka kɛɲɛ ni mɔgɔw sago ye ka kɛɲɛ ni sanubɔlan hakɛ kɛrɛnkɛrɛnnenw ye

* Marka walima logo suganditaw

* Voltage ni plug suganditaw jamana wɛrɛw la

HSQY Plastic Group sigira senkan san 2008. HSQY Plastic bɛ baara kɛ i n’a fɔ fɛn dilanni ni jagokɛla, ni seereyaw ye ka bɔ SGS ni TUV fɛ. A sigilen bɛ Changzhou, a bɛ baara kɛ ni fɛn dilanni yɔrɔ kɔrɔlenw ye Yiwu ani Taizhou. Sosiyete in ka baara ɲɛsinnen bɛ plastikiw ma i n’a fɔ PVC, PET, CPET, PP, PC, PS, ABS, ani PMMA. San 2019, an ye dɔ fara dumuni pakew dilanni kan, ka wari bila izini kura dɔ la. An ka fɛn dilannenw kunbabaw ye PET, CPET, PP, PS, dumunikɛminɛnw ye minnu bɛ se ka tiɲɛ, dawolo filimu, ani masinw. An ye diɲɛ jɛɲɔgɔnya barikamaw sigi senkan ani ka jago kɛ diɲɛ kɔnɔ, ni san o san jagokɛtaw tɛmɛna miliyɔn 30 kan. Jogoɲumanya sabatili fɛ, furakɛli fɛɛrɛw fɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ani fɛnw dilancogo ɲuman fɛ, an bɛ plastiki fɛn dilannenw ɲɛnabɔcogo minnu musaka ka dɔgɔ kosɛbɛ, olu di an ka diɲɛ cikɛlaw ma.