Kot-to-Sayz Klia Polycarbonate shit 0.8mm 1mm 2mm
HSQY kot-to-sayz klia polycarbonate sheet matirial de fɔ bayer dɛn we nid 0.8mm, 1mm ɛn 2mm transparent sɔlid PC sheet matirial s fɔ glazing, protɛktiv panɛl, ikwipmɛnt kɔva, displei, fabrication ɛn ɔda industrial aplikeshɔn dɛn.
Standart ɛn kɔstɔm sheet matirial dimɛnshɔn dɛn de, wit klia, kala transparent ɛn opaque kala opshɔn fɔ distribyushɔn, fabricatɔ, manifakta ɛn prɔjek bayer.
Fɔ kɔt-to-sayz ɔda, gi di tik we yu nid, di wit ɛn lɔng we yu dɔn dɔn, di dimɛnshɔnal tolɛreshɔn, kɔlɔ, kwantiti ɛn ɛni ɔda tin we yu nid fɔ kɔt, drɔ, bɛnd ɔ print.
Rikwest fɔ Kɔt-to-Sayz Prayz Rikwest fɔ wan Sampul
Klia Polycarbonate shit Spɛsifikeshɔn dɛn
| Prɔpati |
Spɛsifikeshɔn |
| Ɛgzampul |
PC sheet matirial |
| Mak |
HSQY we de wok |
| Kɔd |
PC-1-1 |
| Sayz |
1220 * 2400/1200 * 2150mm / Kastom Saiz |
| Kɔlɔ |
Klia/Klia wit kala/Opaque kalaful |
| Tik we i tik |
0,8-15mm na wan |
Dis prodakt na patikyula wan fɔ bayer dɛn we de sɔs tin klia PC sheet matirial s insay 0.8mm, 1mm ɛn 2mm tiknɛs. Dɛn kin tɔk bɔt ɔda tik dɛn we de insay di rɛnj we de akɔdin to wetin di prɔjek nid.
Send Yu Dimenshons we Yu Rikwayd
0,8mm 1mm 2mm Klir Polycarbonate shit
Tin sɔlid polycarbonate sheet matirial fayn fɔ aplikeshɔn usay dɛn nid klia, rili laytwɛt ɛn fabricable plastic panɛl.
Di 0.8mm, 1mm ɛn 2mm opshɔn dɛn kin tink bɔt fɔ protɛktiv kɔva, transparent gad, displei kɔmpɔnɛnt, patishɔn, glazing insɛt ɛn fabricated pat dɛn dipen pan di strɔkchɔral ɛn prɔsesin rikwaymɛnt dɛn fɔ di prɔjek.
Faynal tiknes selekshɔn fɔ tink bɔt di finish panɛl dimɛnshɔn, sɔpɔt we, rigiditi we dɛn nid, fɔm rikwaymɛnt ɛn ɔpreshɔn ɛnvayrɔmɛnt.
Kɔt-to-Sayz Polycarbonate shit Savis
Kɔt-to-sayz saplai de ridyus sɛkɔndari prɔsesin fɔ distribyushɔn, manifakta ɛn fabricatɔ we nid fɔ dɔn sheet matirial s we dɛn pripia to spɛsifikɛd dimɛnshɔn.
We yu de aks fɔ kɔstɔm kɔt, spɛsifa di finish wit, lɔng, tik ɛn akseptabl dimɛnshɔnal tolɛreshɔn. If dɛn nid fɔ gɛt ol, slɔt, kɔt ɔ spɛshal shep, dɛn kin gi drɔin fɔ mek dɛn ebul fɔ evaluate.
| Kɔt-to-Sayz Rikwaymɛnt |
Infɔmeshɔn fɔ Gi |
| Tik we i tik |
0.8mm, 1mm, 2mm ɔ ɔda tik we dɛn nid |
| Wayd |
Width we dɛn nid fɔ dɔn |
| Lɔng |
Rikwayd fɔ dɔn lɔng lɔng |
| Fɔ alaw |
Rikwayd dimɛnshɔnal tolɛreshɔn |
| Kɔlɔ |
Klia, transparent kɔlɔ ɔ opaque kɔlɔ |
| Atikul Prɔsesin |
Dril, panch, bɛn, engrav, polish, fɔm ɔ print |
| Drɔin |
Gi drɔin ɔ sampul fɔ kɔmpleks pat dɛn we dɔn dɔn |
Polikabɔnɛt Matirial Pɔfɔmɛnshɔn
High Light Transmission: I go rich 88% dat na di sem tik we di jenɛral glas gɛt.
Impact Resistance: Eksɛlɛnt impak resistans, we dɛn rayt am 80 tɛm pas di wan we glas gɛt.
Weta ɛn UV Rɛsistɛns: Di matirial infɔmeshɔn de list wan ɔltra vayolɛt kɔɛkstrud fim na di sheet matirial sɔfa fɔ ɛp fɔ ridyus di rɛsin taya ɔ yɔlɔ we di ɔltra vayolɛt ɛksplɔshɔn kin mek.
Temperatur Resistans: 40 ° C ~ +120 ° C.
Layt Weyt: Dɛn rayt am na 1/12 nɔmɔ pan di wet fɔ glas we gɛt di sem tik.
Fɔmabiliti: Polycarbonate kin kol bɛnt ɛn thermal shep fɔ fayn aplikeshɔn.
Flame Resistance: Dɛn rayt di ay faya pefɔmɛns raytin as Klas B1.
Saund ɛn Ɔt Insuleshɔn: Dɛn kin yuz polikabɔnɛt bak fɔ du tin dɛn we nid fɔ mek sawnd ɛn tɛmal insuleshɔn.
Ɛnjinia Pɔfɔmɛnshɔn: Polikabɔnɛt de jɔyn fizik, mɛkanikal, ilɛktrik ɛn tɛmal prɔpati fɔ bɔku bɔku injinɛri aplikeshɔn dɛn.
Klia Polycarbonate shit Aplikeshɔn dɛn
Ilɛktronik Aplayans: Dɛn kin yuz polikabɔnɛt fɔ mek insulin plɔg-in, kɔyl freym, tiub sɔkɛtɛ ɛn bateri shel fɔ fayn aplikeshɔn dɛn.
Mɛkanikal Ikwipmɛnt: Dɛn kin yuz polikabɔnɛt fɔ sɔm gia dɛn, rɛk, bolt, lev, krankshaft, haus, kɔva, freym ɛn ɔda tin dɛn.
Medikal Ikwipmɛnt: Mɛdikal aplikeshɔn dɛn nid fɔ gɛt di rayt matirial gred ɛn aplikeshɔn-spɛsifi k tɛknikal ɔ rigyuletɔri dɔkyumentri.
Kɔnstrɔkshɔn: Dɛn kin yuz polikabɔnɛt bak fɔ kɔnstrɔkshɔn we fayn ɛn fɔ yuz grɛnhɔus-panɛl.
Polycarbonate shit Imej dɛn
Polycarbonate shit Prɔsesin Opshɔn dɛn
| Prosesin Opshɔn |
Pɔch Infɔmeshɔn |
| Prɛsishɔn Kɔt |
Finished wit, lɔng ɛn tolɛreshɔn |
| Fɔ mek tin dɛn we dɛn rayt |
Patna, pozishɔn ɛn dip we dɛn nid |
| Fɔ bɛn |
Tiknɛs, bɛnd rayus ɛn dɔn jɔyometri |
| Panch / Drilin we yu de du |
Hol saiz, pozishɔn ɛn spɛshal ples |
| Fɔ polish |
Rikwayd finish edj apinans |
| Bonding we gɛt fɔ du wit dɛnsɛf |
Assembly ɛn bonding rikwaymɛnt dɛn |
| Tɛmofɔmin we dɛn de mek |
Mold jɔyometri ɛn finish-pat rikwaymɛnt dɛn |
| UV Flatbed Printin we dɛn kin yuz fɔ print |
Atwok, print pozishɔn ɛn sɔfays rikwaymɛnt dɛn |
| Fɔ Print na Skrin |
Atwok ɛn di tin dɛn we dɛn nid fɔ print we dɛn dɔn print |
Rikwest Kɔstɔm Prɔsesin
Polikabɔnɛt Kad Matirial ɛn Ɔvlay Film Spɛsifikeshɔn dɛn
| Prɔpati |
Spɛsifikeshɔn |
| Di Nem fɔ Prodak |
PC Card Material , polikabɔnɛt ɔvlay film |
| Tin dɛn |
100% nyu matirial polycarbonate |
| Kɔlɔ |
posin wayt, milk wayt,Transparent |
| Sho |
smol, frɔst Glossy, Mat |
| Tiknɛs rɛnj |
0.05/0.06/0.075/0.10/0.125/0.175/0.25mm ɔ we dɛn kɔstɔmayz |
| We |
Kalɛnda we dɛn de du |
| Aplay fɔm |
plastic kad mek, Laser engraving kad,Laser printin kad |
| Di Tin dɛn we Yu Go Du fɔ Print |
CMYK Ɔfset Printin, Silk-skrin printin, UC sikyɔriti printin, Laser printin |
Wetin Baya dɛn Fɔ Kɔnfɛm Bifo Dɛn Ɔda
| Rikwaymɛnt |
Infɔmeshɔn fɔ Gi |
| Tik we i tik |
0.8mm, 1mm, 2mm ɔ ɔda tik we dɛn nid |
| Saiz we dɛn dɔn dɔn |
Wid ɛn lɔng we dɛn nid |
| Fɔ alaw |
Rikwayd dimɛnshɔnal tolɛreshɔn |
| Kɔlɔ |
Klia, klia wit kɔlɔ ɔ opaque kɔlɔ |
| Aplay fɔm |
Glazing, gad, displei, ikwipmɛnt kɔva, fabrication ɔ ɔda ɛnd yus |
| Yuz am na do |
Yuz insay ɔ na do ɛn we dɛn nid UV kɔnfigyushɔn |
| Di we aw dɛn de du di wok |
Di tin dɛn we dɛn nid fɔ kɔt, drɔ, panch, bɛn, fɔm ɔ print |
| Ɔmɔs |
Sampul kwantiti, trayal ɔda ɛn bɔlk kwantiti |
| Usay yu de go |
Kɔntri, pɔt ɛn delivri rikwaymɛnt dɛn |
Get wan Klia Polycarbonate shit Kot
Kwɛstyɔn dɛn we Dɛn Kin Aks Bɔku tɛm
Us tiknes de fɔ dis klia polycarbonate sheet matirial ?
di prodakt rεnj de list na 0.8-15mm, wit 0.8mm, 1mm εn 2mm we na ki opshכn fכ dis kכt-to-sayz klia polycarbonate sheet matirial .
HSQY kin kot polycarbonate sheet matirial to mi rikwayd dimɛnshɔn?
Yɛs. Kastom-sayz saplai ɛn prɛsishɔn kɔt de. Gi di wid, lɔng ɛn dimɛnshɔnal tolɛreshɔn we yu nid wit yu kwɛstyɔn.
Us standad saiz dɛn de?
Di opshɔn dɛn we de sheet matirial inklud 1220*2400mm, 1200*2150mm ɛn kɔstɔm saiz dɛn.
Us kɔlɔ dɛn dɛn kin gi?
Di prodakt renj inklud klia, klia wit kala ɛn opaque kalaful opshɔn dɛn.
Wetin na di layt transmishɔn fɔ di polikabɔnɛt sheet matirial ?
Layt transmishכn dεn list am to 88% dat fכ di sem tiknes fכ jεnarכl glas. Aktual optik pefomans kin difrɛn wit tik, kɔlɔ, sɔfa ɛn gred.
Aw impak resistant na polikabɔnɛt?
Dɛn rayt di impak rɛsistɛns pan 80 tɛm pas di wan we glas gɛt. If yu prɔjek nid fɔ gɛt difayn impak valyu ɔ tɛst standad, kɔnfɔm di aplikebul tɛknikal data bifo yu ɔda.
Wetin na di faya raytin fɔ polikabɔnɛt?
Klas B1 de na di list fɔ di matirial. If dɛn nid fɔ fala fɔmal faya, kɔnfɔm di standad ɛn tɛst dɔkyumentri we de fɔ di rayt gred ɛn tik.
Yu tink se polikabɔnɛt nɔ kin brok atɔl?
Polikabɔnɛt de gi ay impak rɛsistɛns, bɔt nɔ sheet matirial fɔ trit as kɔmplit wan we nɔ de brok ɔnda ɛvri lod, eksplɔziv ɔ balistik kɔndishɔn.
Yu tink se dɛn kin kɔt polikabɔnɛt sheet matirial wit kɔvɛnshɔnal tul dɛn?
Jigsaw, band saw ɛn fret saw kin yuz fɔ fayn kɔt wok. Di wan dɛn we de bay kin yuz HSQY kɔt-to-sayz savis bak fɔ ridyus sɛkɔndari prɔsesin.
Aw fɔ klin polikabɔnɛt sheet matirial ?
Yuz wam sop wata wit saf klos ɛn avɔyd abrasive matirial we kin afɛkt ɔ skrach di sheet matirial surface.
Wetin na di difrɛns bitwin polikabɔnɛt ɛn akrilik?
Dɛn tu na transparent plastic, bɔt dɛn kin jɔs pik polikabɔnɛt usay dɛn nid fɔ gɛt ay impak rɛsistɛns ɛn fɔ mek dɛn ebul fɔ mek tin dɛn. Eksakt faya, optik ɛn mɛkanikal pefɔmɛns fɔ kɔmpia yuz gred-spɛsifi k tɛknikal data.
Yu tink se polikabɔnɛt sheet matirial s kin chenj in kɔlɔ as tɛm de go?
Di matirial infɔmeshɔn de diskrayb wan transparent UV protɛktiv layt ɛn ɛkstend rɛsistɛns to diskɔlɔreshɔn. Fɔ lɔng tɛm ɔda aplikeshɔn, kɔnfɔm di ɛksaktɔ UV-protɛkt gred ɛn aplikebul savis kɔndishɔn.
Yu tink se dɛn kin yuz polikabɔnɛt usay dɛn nid fɔ kɔntrol di ɔt we di san de mek?
If dɛn nid fɔ yuz ɛnaji-riflɛktiv ɔ solar-kɔntrol fɛnshɔn, spɛsifa dis rikwaymɛnt we yu de aks fɔ kot so dat dɛn go kɔnfɔm di rayt sheet matirial kɔnfigyushɔn.
Us infɔmeshɔn a fɔ gi fɔ kot?
Gi di tik we dɛn nid, di dimɛnshɔn dɛn we dɛn dɔn dɔn, di kɔlɔ, di aplikeshɔn, di tolɛreshɔn, di tin dɛn we dɛn nid fɔ du fɔ prosɛs, di kwantiti ɛn di say we dɛn want fɔ go. Di drɔin dɛn kin fayn fɔ di pat dɛn we dɛn kɔt ɔ we dɛn mek bay dɛnsɛf.
Fɔ pak tin dɛn
Di Introdyushɔn fɔ di Kɔmni
Changzhou Huisu Qinye Plastic Group Co., Ltd. spɛshal pan di prodakshɔn ɛn sɛl fɔ PC bod, PC ɛnjɔymɛnt bɔd, PC difyushɔn bɔd ɛn kɔstɔmayz PC sheet matirial prɔsesin.
Prosesin kapabiliti inklud engraving, bend, prɛsishɔn kɔt, panch, polish, bond, thermoforming, blista prɔsesin, UV flatbed printin ɛn skrin printin. Dɛn kin prosɛs drɔin ɛn sampul dɛn bak akɔdin to wetin di prɔjek nid.
HSQY gɛt pas 16 ia ɛkspɔt ɛkspiriɛns fɔ saplae PC sheet matirial s to kɔstɔma dɛn ɔlsay na di wɔl.
Kontakt HSQY fɔ Sampul ɛn Prayz
