HSQY 0.5mm klia PETG sheet matirial na wan transparent nɔ-kristalin kɔpɔlyɛsta we dɛn mek fɔ tɛmɔfɔm, vaykum fɔm, sayn, rital displei, pak, mek mɔdel ɛn ɔda fabrik plastic kɔmpɔnɛnt dɛn.
Na wan nominal tiknes we na 0.5mm, ɔ lɛk 0.020 inch, PETG de gi yusful balans fɔ fleksibiliti, transparency ɛn shep ritɛnshɔn fɔ laytwɛt fɔm pat dɛn, print grafik, transparent kɔva ɛn displei kɔmpɔnɛnt dɛn.
di brayt HSQY PETG rεnj naw de kכba 0.15–7mm tiknes. Rol widths de list frɔm 110–1280mm, we sheet matirial fɔmat dɛn inklud 915 × 1220mm, 1000 × 2000mm ɛn kɔstɔmayz dimɛnshɔn. Baya dɛn fɔ spɛsifa fɔm dip, sheet matirial ɔ rol fɔmat, optik rikwaymɛnt ɛn dawɔnstrim fabrikeshɔn prɔses we dɛn de aks fɔ kot.
PETG Plastik shit Data Shit
0.5mm Klia PETG shit Spɛsifikeshɔn dɛn
| di prɔpati dɛn |
Ditiɛl dɛn bɔt |
| Di Prodak Nem |
0.5mm Klia PETG shit |
| Tin dɛn |
PETG – Nɔn-Kristalin Kɔpɔlyɛsta wit CHDM |
| Tiknɛs we dɛn sho |
0.5mm / Na lɛk. 0.020 inch |
| Broda Listed Tiknɛs Rɛnj |
0,15–7mm na di wan |
| Rol Width we yu de yuz |
110–1280mm |
| Di Sayz dɛn fɔ di Sheet dɛn |
915 × 1220mm, 1000 × 2000mm, Di wan we yu kin kɔstɔmayz |
| Tik |
1,27–1,29g/cm⊃3, ɛn di ɔda wan dɛn; |
| Kɔlɔ |
Klia; ɔda PETG kɔlɔ dɛn we de ɔnda spɛsifikɛshɔn |
| Men Prɔsesin |
Tɛmofɔmin, Vaykum Fɔm, Kɔt, Day Kɔt, Drlin, Panch ɛn Ɔda Fabrikeshɔn as i Apɔynt |
| Men Aplikeshɔn dɛn |
Tɛmofɔm Pat, Sayn, Displei, Pakɛj, Mɔdel Mek ɛn Sɛlekted Kad Aplikeshɔn |
| Dokumɛnt dɛn we dɛn dɔn list |
SGS, ISO 9001: 2008, ɛn di ɔda wan dɛn; aks fɔ di kɔrɛnt dɔkyumɛnt dɛn we de aplay to di ɛksaktɔl gred we dɛn gi |
| MOQ we gɛt fɔ du wit am |
1000kg na wan |
| Di Tɛm dɛn fɔ Pe |
30% Dipɔsit, 70% Balans Bifo yu ship |
| Di Tɛm dɛn fɔ Delivri |
FOB, CIF, EXW, ɛn ɔda pipul dɛn |
| Listed Lid Taym |
7–15 Dez Afta Dipɔsit, dipen pan spɛsifikɛshɔn ɛn ɔda volyum |
Wetin Na 0.5mm PETG shit ?
PETG na glycol-modified copolyester we dεn de yuz fכ prodyuz klia tεmכplastik sheet matirial εn film. Di modifyeshɔn chenj di kristalizashɔn bihayvya fɔ kɔvɛnshɔnal PET ɛn gi PETG yusful kwaliti fɔ tɛmfɔmin, bɛnd ɛn fabrikeshɔn.
Wan 0.5mm PETG sheet matirial na rili tin we yu kɔmpia am wit kɔvɛnshɔnal rigid glazing panɛl dɛn. I kin fleks we yu de handle we i de mentɛn inof shep fɔ bɔku laytwɛt fɔm pat dɛn, displei kɔmpɔnɛnt dɛn, print sheet matirial s ɛn kɔva dɛn.
di 0.5mm gej na patikyula rilevεnt usay hεvi strכkchכral sheet matirial nכ nid εn lכw mεtirial wet, izi fכm εn tina finish kכmכpכnt dεm na dεn fכs.
0.5mm PETG shit fɔ Tɛmofɔmin
Tεmכfכmin na praymar aplikεshכn fכ 0.5mm PETG sheet matirial . Di matirial kin ɔt ɛn shep to laytwɛt kɔva, pak kɔmpɔnɛnt, mɔdel, displei pat ɛn ɔda tri-dimɛnshɔnal prodak dɛn we di PETG gred ɛn fɔm kɔndishɔn dɛn mach kɔrɛkt wan.
di tεm we dεn de tεmכfכm, di stat 0.5mm sheet matirial de tכn na εria dεm we de כnda big strεch. Di fainal wol-tiknes distribushɔn so dipen pan drɔ dip, mold jɔyometri, kɔna rayus, draft angle ɛn fɔm tɛknik.
Fɔ prodakshɔn prɔjek, di wan dɛn we de bay fɔ gi di dimɛnshɔn dɛn we dɔn dɔn, di mold jɔyometri, maksimal dip we dɛn de drɔ ɛn di minim we dɛn kin akseptabl di wɔl tik so dat dɛn go ebul fɔ rivyu di statin sheet matirial spɛsifikɛshɔn.
0.5mm PETG shit fɔ Vaykum Fɔm
Klia 0.5mm PETG kin evalyu fɔ vaykum-fɔm ikwipmɛnt we dɛn kin yuz fɔ prodyuz protɔtayp, pak kɔmpɔnɛnt, mɔdel pat, transparent kɔva ɛn displei ɛlimɛnt.
Yunifɔm ɔt impɔtant wit tin PETG bikɔs if yu gɛt bɔku lokal ɔt i kin mek di sag bɔku ɔ i kin mek di wɔl distribyushɔn nɔ ivin. Fɔm trayal fɔ evaluate klia, wɛb, mold difinishɔn, kɔna tinin, shrinkage ɛn trim kwaliti.
Mashin tayp, hita kɔnfigyushɔn, mold dimɛnshɔn ɛn saykl sɛtin fɔ inklud we dɛn de aks fɔ matirial fɔ wan establish vaykum-fɔmin prɔses.
Yu tink se 0.5mm PETG Nid fɔ Prɛ-Dray?
Pri-drying nɔ fɔ trit as yunivasal yes-ɔ-nɔ rikwaymɛnt fɔ ɛvri PETG prodakshɔn kɔndishɔn.
Sɔm PETG sheet matirial gred dɛn kin thermoformed witout wan sɛpret prɛ-dray stej we di sheet matirial dɔn stɔrɔd kɔrɛkt wan ɛn dɛn dɔn kɔntrol mɔstɔ. stכrej kכndishכn, mεtirial gred, sheet matirial mכsichכ, hεt mεtכd εn fכm saykl kin afekt di risכlt.
Fɔ fala di prɔsesin rɛkɛmɔndeshɔn fɔ di aktual saplai matirial ɛn du wan prodakshɔn trayal bifo yu kɔnfɔm bɔlk prɔsesin paramita dɛn.
Wetin Mek Yuz 0.5mm PETG fɔ Tin-Gɛj Fɔm?
Tin-Gej Kɔnstrɔkshɔn: 0.5mm matirial kin ridyus pat wet usay tik rigid sheet matirial nɔ nid.
Tεmכfכm Kεpabiliti: Suitabl PETG gred dεm kin riprodyuz ditayla tεmכfכm shep dεm we yu de yuz di rayt hεt εn tul.
Klia Apiyans: Transparent PETG yusful usay visibiliti tru di finish komponent impɔtant.
Yuzful Tafnɛs: PETG dɛn kin pik bɔku tɛm usay di rɛsistɛns fɔ krak we dɛn de mek ɛn nɔmal hanlin impɔtant.
Fabrikeshɔn: PETG kin evalyu fɔ kɔt, panch, drɔl, day kɔt ɛn bɛnd yuz fayn tul ɛn prɔses kɔndishɔn.
Dɛkɔreshɔn: Dɛn kin print ɔ dɛkɔret di kɔmpatibl PETG sɔfays dɛn afta dɛn dɔn validet di ink ɛn adheshon sistɛm we dɛn bin want.
PETG shit Imej ɛn Aplikeshɔn Ɛgzampul dɛn
![0,5mm klia PETG sheet matirial]( "0.5mm PETG Sheet")
0.5mm Klia PETG shit
![PETG sheet matirial tεmכfכm ova tut mכdel]( "PETG Sheet for Tooth Model")
PETG shit fɔ Tut Mɔdel
![0.5mm PETG sheet matirial fɔ fɔm vaykum]( "PETG Sheet for Vacuum Forming")
PETG shit fɔ Vaykum Fɔm
0.5mm PETG shit fɔ Sayn
Klia PETG kin yuz fɔ sɛlɛkɛt indo sayn, print displei grafik, mɛnyu panɛl, prɔmoshɔnal kɔmpɔnɛnt ɛn sayn insayt usay dɛn nid laytwɛt transparent sabstret.
Bikɔs 0.5mm PETG rili tin, big panɛl dɛn we nɔ gɛt sɔpɔt kin fleks. Sayn manifakta dɛn fɔ tink bɔt aw fɔ mawnt, bak, panɛl dimɛnshɔn ɛn aw fɔ handle we dɛn de disayd if 0.5mm de gi inof stiffness.
Lɔng tɛm ɔda sayn nɔ fɔ yuz standad PETG ɔtomɛtik wan. Usay dɛn nid fɔ ɛksplɔz na do, sho wetin dɛn nid fɔ du wit UV ɛn kɔnfɔm wan gred we fit na do ɔ we gɛt UV.
0.5mm PETG shit fɔ Print
PETG kin print ɛn dɛkɔret fɔ sayn, rital displei, kad, grafik ɛn pak kɔmpɔnɛnt dɛn we di sheet matirial sɔfa ɛn ink sistɛm kɔmpitabl.
Di tin dɛn we dɛn kin du kin inklud fɔ print skrin ɛn ɔda we dɛn fɔ print ɔ fɔ dekɔret we go gri wit am. Printin rizulyt dipen pan ink kemistri, surface pripia, curing kondishɔn ɛn post-print fɔm rikwaymɛnt.
Usay di PETG we dɛn print go afta dat dɛn go gɛt tɛmfɔm, tɛst di kɔmplit printin ɛn fɔm prɔses fɔ chɛk fɔ si if ink de adheshon, grafik distɔrshɔn ɛn aw i tan afta yu dɔn strɛch.
PETG shit fɔ Ritayl Displei dɛn
PETG na tin we dɛn kin yuz bɔku bɔku wan fɔ pɔynt-ɔf-pɔch displei, prodak ɔlda, shelf kɔmpɔnɛnt, prɔmoshɔnal strɔkchɔ ɛn ɔda transparent rital fiks usay dɛn nid fɔ fɔm ɛn fɔm.
Di 0.5mm gej na di bɛst we fɔ laytwɛt kɔmpɔnɛnt ɔ dizayn dɛn we de gɛt sɔpɔt frɔm freym, fold jɔyometri ɔ ɔda strɔkchɔral ɛlimɛnt dɛn. Big sɛlf-sɔpɔt displei panɛl dɛn kin nid fɔ gɛt tik PETG sheet matirial .
PETG shit fɔ Mɔdal Mek ɛn Protɔtayp
Tin PETG sheet matirial kin yusful fɔ vaykum-fɔm protɔtayp, mɔdel, mɔk-ap, transparent kɔva ɛn fɔm demonstreshɔn kɔmpɔnɛnt dɛn.
Fɔ mɔdel-fɔmin aplikeshɔn, spɛsifa di mold matirial, dimɛnshɔn, dip, rilis rikwaymɛnt ɛn ditiɛl riprodakshɔn we yu want. Fɔm trayal fɔ bi usay dimɛnshɔnal akkuracy ɔ surface kwaliti impɔtant.
PETG shit fɔ Kad ɛn Laminat Aplikeshɔn dɛn
Dɛn kin yuz PETG matirial dɛn we dɛn dɔn pik na kad ɔ laminated strɔkchɔ usay transparency, printability, bonding ɛn flexibility mit di finished-product rikwaymɛnt dɛn.
Di wan dɛn we de mek kad fɔ spɛsifa di PETG layt fɛnshɔn, tik, sɔfa, printin we, lamineshɔn prɔses ɛn dɔn kɔnstrɔkshɔn pas fɔ tek am se ɔl PETG gred dɛn de gi di sem kad-prɔsɛsin bihayvya.
Yu tink se 0.5mm PETG fit fɔ Glazing?
Na 0.5mm tik nɔmɔ, dis PETG sheet matirial fɔ jɔs trit am lɛk tin transparent sheet matirial pas fɔ trit am lɛk strɔkchɔral glaz.
I kin evalyu fɔ laytwɛt displei winda, transparent kɔva, insɛt ɛn ɔda sɔpɔt vijual aplikeshɔn dɛn. Strukchɔral glazing, protɛktiv barɛri ɔ sefty-kritikal transparent panɛl dɛn nid sɛpret tik, impak, sɔpɔt ɛn rigyuletɔri ɛvalueshɔn.
PETG Tafnɛs ɛn Impɛkt Pɔfɔmɛnshɔn
PETG na kɔmɔn we dɛn kin pik fɔ impɔtant tafnɛs ɛn rɛsistɛns to chip ɔ krak kɔmpia wit mɔ brit transparent sheet matirial matirial dɛn na bɔku fabrik aplikeshɔn dɛn.
Di ɔrijinal prodak infɔmeshɔn inklud wan jenɛral nɔmba kɔmpiashɔn wit akrilik, bɔt dɛn nɔ no ɛni tɛst we, tiknes kɔmpiashɔn ɔ ɛksaktɔ gred. Baya dɛn we nid fɔ gɛt minim impak pefɔmɛns fɔ aks fɔ tɛnki data fɔ di ɛksaktɔl PETG gred we dɛn de saplae.
PETG Kεmikכl Rεsistεns
PETG de gi yusful rεsistεns to plεnti sכbstans dεm we dεn kin mit insay jεnarכl fכbrik, rital εn pak envayroment, bכt kεmikכl rεsistεns de difrεn akɔdin to di sכbstans εn kכndishכn.
Usay klin ɛjɛn, sɔlvɛnt ɔ ɔda kemikal dɛn go kɔntakt di pat we dɔn dɔn, gi di kemikal nem, kɔnsɛntreshɔn, tɛmpracha, kɔntakt tɛm ɛn strɛs kɔndishɔn fɔ mek dɛn rivyu di kɔmpitibliti.
Standart PETG ɛn Ɔda UV Ɛksplɔshɔn
Standard klia PETG nɔ fɔ ɔtomɛtik trit am lɛk lɔng tɛm ɔdasay sheet matirial jɔs bikɔs PETG kin yuz insay sayn aplikeshɔn.
Fɔ ɔda prɔjek dɛm, spɛsifa di UV ɛksplɔshɔn we dɛn de ɛkspɛkt, savis tɛm, tɛmpracha rɛnj ɛn we dɛn nid fɔ kip di klia, kɔlɔ ɛn mɛkanikal prɔpati dɛm. Kɔnfɛm if dɛn nid fɔ gɛt UV-protɛkt PETG gred.
PETG Fɔd-Kɔntakt Aplikeshɔn dɛn
Dɛn kin mek PETG gred dɛn we dɛn dɔn pik fɔ it-kɔntakt aplikeshɔn, bɔt it-kɔntakt suitabiliti na spɛshal to di rɛsin gred, aditiv, prodakshɔn spɛsifikɛshɔn ɛn dɛstineshɔn makɛt.
Fɔ pak di it, gi di kayn it, di dairekt ɔ indayrɛkt kɔntakt kɔndishɔn, tɛmpracha, di tɛm we dɛn fɔ kip am ɛn di makɛt dɔkyumentri we dɛn nid. Rikwest kɔrɛnt dɔkyumɛnt fɔ di ɛksaktɔ kot PETG matirial bifo kɔmɛshɔnal yuz.
0.5mm PETG vs. Tik wan PETG shit
| Tiknes Dairekshɔn |
Jɛnɛral Aplikeshɔn Dairekshɔn Sɛlɛkshɔn |
Kɔnsidɛreshɔn |
| 0,15–0,3 mm |
Tin film, kad layers ɛn laytwɛt kɔnvɔyt aplikeshɔn dɛn |
Fidin, fleksibiliti, handel ɛn fayn rigiditi |
| 0,5mm na di wan |
Vaykum fɔm, laytwɛt kɔva, mɔdel, displei, print pat ɛn pak protɔtayp |
Balans fɔ fleksibiliti, klia ɛn tin-gɛj fɔm kapabiliti |
| 1–2mm na wan |
Mɔ rigid fɔm kɔmpɔnɛnt dɛn, displei dɛn, kɔva dɛn ɛn panɛl dɛn we dɛn mek |
Panel stiffness, fɔm dip, fabrication ɛn finish wet |
| 3–7mm na di wan |
Tik displei panɛl ɛn fabricated komponent dɛn we nid fɔ mek big stat- sheet matirial stiffness |
Sɔpɔt, mashin, fɔm ikwipmɛnt, lod ɛn finish dimɛnshɔn |
Dɛn rɛnj ya na jenɛral aplikeshɔn dairekshɔn pas strɔkchɔral rɛytin. Faynal tiknes fɔ pik akɔdin to di aktual pat jɔyometri, sɔpɔt, lod, fɔm dip ɛn fabrikeshɔn prɔses.
PETG Rol vs. Kɔt Shit
| Fɔmat |
Tipik Prodakshɔn Dairekshɔn |
Wetin fɔ Spɛsifik |
| PETG Rol we dɛn kɔl |
Kɔntinyu fɔ kɔnvɔyt ɛn rol-fed prɔsesin |
Tiknes, rol wit, kor dimɛnshɔn, rol wet ɛn winding rikwaymɛnt |
| PETG shit |
Cut- sheet matirial fɔm, print, sayn, fɔ mek mɔdel ɛn fɔ mek |
Tik, lɔng, wit, flat, sɔfa protɛkshɔn ɛn optik rikwaymɛnt |
PETG vs. APET fɔ Tɛmofɔmin
| Selekshɔn Faktɔ |
PETG |
APET |
| Matirial Strukchɔ |
Glycol-modified kɔpɔliɛsta |
Amɔrfɔs PET |
| Tipik Dairekshɔn |
Kompleks fɔm, displei, mɔdel, bɛnd ɛn difrɛn fabrikeshɔn |
Trey, blista, klamshɛl ɛn ay-volyum transparent pak |
| Dip Fɔm |
Bɔku tɛm dɛn kin pik am usay dɛn nid fɔ drɔ dip ɛn shep dɛn we gɛt ditayl |
I fayn fɔ bɔku kɔvɛnshɔnal pak-fɔm ɔpreshɔn dɛn |
| Faynal Choice we yu go pik |
Selekt akɔdin to mold jɔyometri, fɔm prɔses, optik, rigiditi, dawɔnstrim fabrikeshɔn ɛn finish-prɔdakt rikwaymɛnt |
Aw fɔ Spɛsifik 0.5mm PETG shit
| RFQ Item |
Infɔmeshɔn fɔ Gi |
| Aplay fɔm |
Tɛmofɔmin, vaykum fɔm, sayn, displei, pak, mɔdel mek, kad strɔkchɔ ɔ ɔda fabrication |
| Tik we i tik |
0.5mm fכ dis fכs prodak כ כda gej we dεn nid insay di brayt 0.15–7mm rεnj |
| Tiknɛs Tolɛreshɔn |
Rikwayd minim ɛn maksimam tolɛreshɔn usay i impɔtant |
| Fɔmat fɔ di Sapɔt |
Rol ɔ sheet matirial |
| Rol Width we yu de yuz |
Width we yu nid insay di list 110–1280mm rεnj |
| Sayz fɔ di Shit |
915 × 1220mm, 1000 × 2000mm ɔ nid fɔ kɔstɔmayt dimɛnshɔn dɛn |
| Optik Rikwaymɛnt |
Klari, transmishɔn, haz ɔ vijual-difɛkt krayteria we dɛn nid usay dɛn kin kɔntrol |
| Di we aw dɛn de mek di tɛmmofɔm |
Vaykum fכm, prεshכn fכm כ כda fכm prכsεs |
| Mold Jɛometri |
Finished dimɛnshɔn, maksimal drɔ dip, draft angle, kɔna rayus ɛn krichɔ ficha dɛn |
| Finished Wall Tiknɛs we dɛn dɔn mek |
Minimum akseptabl wɔl tik afta fɔm usay dɛn kɔntrol am |
| Fɔ print |
Printin we, ink sistem ɛn if printin de apin bifo ɔ afta fɔm |
| Fabrikeshɔn fɔ mek tin dɛn |
Kɔt, day kɔt, drɔl, panch, bɛnd ɔ ɔda prɔsesin we de dɔŋ di wata |
| Di we aw pɔsin kin si am na do |
Spɛsifik UV ɛksplɔshɔn ɛn di savis tɛm we dɛn nid if dɛn nid fɔ gɛt gred na do |
| Fɔd Kɔntakt |
Spɛsifik kɔntakt kɔndishɔn ɛn di dɛstineshɔn-maket dɔkyumentri we dɛn nid usay i apɔynt |
| Kεmikכl εkspכzכn |
Kεmikכl כ klin, kכnsantreshכn, tεmprachכ εn di tεm we dεn de εkspos usay i rili impɔtant |
| Ɔmɔs |
Kwantiti we dɛn nid; MOQ we de na di list naw na 1000kg |
| Usay yu de go |
Di kɔntri ɔ pɔt usay dɛn de go |
Rilat PET plastic sheet we dɛn mek Matirial dɛn
Difrɛn PET -famili matirial dɛn fit fɔ difrɛn fɔm, pak ɛn fabrikeshɔn rikwaymɛnt dɛn. Baya dɛn we de kɔmpia PETG wit kɔvɛnshɔnal transparent PET matirial dɛn kin rivyu di HSQY PET prodak rɛnj dɔŋ ya.
Ekspl ɔ r HSQY Transparent PET plastic sheet we dɛn mek s
Paket fo 0.5mm PETG shit
![PETG plastic sheet matirial pak we dɛn kin pak]( "PETG Plastic Sheet Packaging")
PETG Plastik shit Pak we dɛn de pak
![PETG plastic sheet matirial palet pak]( "PETG Sheet Pallet Packaging")
PETG shit Palet we dɛn de pak
Pakɛj ɛn Delivri
| Item |
Infɔmeshɔn we dɛn dɔn list naw |
| Sampul we dɛn de pak |
Shit dɛn we de insay PE bag dɛn we de protɛkt ɛn katon dɛn |
| Sheet Packaging we dɛn kin yuz fɔ pak di tin dɛn |
30kg fɔ wan bag wit PE film, ɔ akɔdin to di tin dɛn we dɛn gri fɔ pak |
| Palet we dɛn kin pak |
500–2000kg pan wan plai wud palet |
| Kɔntinɛnt we dɛn de lod |
20 tan we dɛn rayt as standad lod rɛfrɛns; aktual lod dipen pan dimɛnshɔn ɛn pak kɔnfigyushɔn |
| Di Tɛm dɛn fɔ Delivri |
FOB, CIF, EXW, ɛn ɔda pipul dɛn |
| Listed Lid Taym |
7–15 Dez Afta Dipɔsit, dipen pan ɔda volyum ɛn spɛsifikɛshɔn |
Sɛtifiket ɛn Dokumɛnt
Di kɔrɛnt prodak infɔmeshɔn de list SGS ɛn ISO 9001:2008 dɔkyumentri. Di wan dɛn we de bay fɔ aks fɔ di kɔpi dɛn we de naw ɛn kɔnfɔm di ɔganayzeshɔn we de gi, di validiti, di skɔp ɛn di aplikebiliti to di ɛksaktɔl PETG gred we dɛn de gi.
We fɔ kɔntakt it, UV pefɔmɛns ɔ ɔda aplikeshɔn-spɛsifi k rikwaymɛnt na mandatory, aks fɔ dɔkyumentri fɔ da patikyula prɔpati de pas fɔ abop pan jenɛral kɔmni ɔ matirial sɛtifiket.
![HSQY PETG sheet matirial sɛtifikeshɔn infɔmeshɔn]( "HSQY PETG Sheet Certification Information")
HSQY Sɛtifiket Infɔmeshɔn
HSQY Globɛl Ɛgzibishin dɛn
![HSQY Plastik Grup global ɛgzibishin dɛn]( "HSQY Global Exhibitions")
HSQY Plastik Grup – Globɛl Ɛgzibishin Aktiviti dɛn
Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 0.5mm PETG shit
Wetin dɛn de yuz 0.5mm PETG sheet matirial fɔ?
0.5mm PETG sheet matirial kin yuz fɔ laytwɛt tɛmfɔmin, vaykum fɔm, sayn, displei, transparent kɔva, mɔdel mek, pak protɔtayp ɛn ɔda fabricated kɔmpɔnɛnt dɛn.
Aw tik na 0.5mm PETG insay inch?
0.5mm na aprɔksimatli 0.020 inch, we mek i rili tin PETG sheet matirial fɔ fɔm ɛn laytwɛt fabrikeshɔn.
Yu tink se 0.5mm PETG kin thermoformed?
Yɛs. Tɛmofɔmin na di men tin we dɛn kin yuz fɔ dis prɔdak. Fɔm rizɔlt dipen pan ɔt, mold jɔyometri, drɔ dip ɛn di PETG gred we dɛn dɔn pik.
Yu tink se 0.5mm PETG kin bi vaykum fɔm?
Yɛs. Di sheet matirial kin evalyu fɔ vaykum-fɔm mɔdel, kɔva, pak kɔmpɔnɛnt ɛn displei pat. Prodakshɔn trayal fɔ verify sag, ditel riprodakshɔn ɛn finish wɔl tik.
PETG nid fɔ drɛy bifo tɛm?
Di rikwaymɛnt dipen pan di PETG gred, stɔrɔj kɔndishɔn ɛn prɔsesin we. Sɔm PETG gred dɛn we dɛn dɔn kip kɔrɛkt wan kin fɔm we nɔ gɛt sɛpret prɛ-dray stej, bɔt dɛn fɔ fala di saplay in prɔsesin gayd.
Yu kin yuz PETG fɔ dip-drɔ tɛmfɔmin?
Yu kin yuz fayn PETG gred fɔ dip fɔm shep ɛn ditayl mold. Start tiknes, draw ratio en fainal wol-tiknes rikwaymεnt dεm fכ evaluate tכgeda.
Na 0.5mm PETG fleksibul?
0.5mm PETG sheet matirial kin fleks izi wan pas tik PETG panεl dεm bכt i de stil bi tεmכplastik sheet matirial pas sכft εlastomeric film.
Yu kin print 0.5mm PETG ?
PETG kin print ɔ dɛkɔret yuz kɔmpitabl sistɛm dɛn. Di wan dɛn we de bay fɔ tɛst ink adheshon, curing ɛn ɛni thermoforming prɔses we de kam afta dat bifo dɛn prodyuz bɔku bɔku wan.
Yu tink se PETG kin kɔt ɛn drɔ?
Kɔt, day kɔt, drɔlin, panch ɛn ɔda fabrikeshɔn prɔses na fayn dairekshɔn fɔ PETG we tul ɛn paramita dɛn fit fɔ di sheet matirial tik.
Yu tink se PETG kin bɛn ɔt?
PETG kin bi ɔt fɔm fɔ fayn aplikeshɔn dɛn. Bεnd rayus, hεt mεtכd εn finish dimεnshכn dεm fכ establish tru trial.
0.5mm PETG fit fo sayn?
Yɛs. Yu kin yuz am fɔ sɔm sayn dɛn we dɛn dɔn pik insay os, grafik insɛt ɛn displei kɔmpɔnɛnt dɛn. Big sayn dɛn we nɔ gɛt sɔpɔt kin nid tik tin ɔ ɔda sɔpɔt.
Yu tink se yu kin yuz standad PETG na do?
Standard PETG nɔ fɔ ɔtomɛtik spɛsifa fɔ lɔng tɛm ɔdasay. Kɔnfɛm if dɛn nid fɔ gɛt gred we gɛt UV fɔ di savis ɛnvayrɔmɛnt we dɛn want.
PETG strɔng pas akrilik?
PETG jεnarali de gi yusful tafnεs εn rεsistεns to chip in plεnti fabricated aplikεshכn dεm, bכt numεrik kכmpεreshכn wit akrilik dipכnt pan di εksakεt grεd, tiknes εn tεst mεtכd dεm.
PETG fayn fɔ yuz fɔ it-kɔntakt?
PETG gred dεm we dεn sεlekt kin fayn fכ yuz fכ it-kכntakt. Rikwest dokumɛnt we aplay to di ɛksaktɔl rɛsin gred, kɔntakt kɔndishɔn ɛn dɛstineshɔn makɛt bifo kɔmɛshɔnal yuz.
Wetin na di difrɛns bitwin PETG ɛn APET ?
PETG na glycol-modified PET εn dεn kin sεlekt am bכku tεm fכ mכr komplεks fכm εn fכm. APET na kכmכn sεlekt fכ kכnvεshכnal klia pak, trey dɛn εn blista tεmכfכm.
Us wayd dɛn de?
Di spɛsifikɛshɔn we de naw de list PETG rol wit frɔm 110mm to 1280mm.
Us standad sheet matirial saiz dɛn de na di list?
Di standad sheet matirial saiz dɛm we de naw inklud 915 × 1220mm ɛn 1000 × 2000mm, wit kɔstɔmayz dimɛnshɔn dɛm we dɛn dɔn list bak.
Us ɔda PETG tiknes dɛn de?
Dis pej de fos pan 0.5mm PETG . Di brada kɔrɛnt prodak spɛsifikɛshɔn de list tiknes frɔm 0.15mm to 7mm.
Wetin na di MOQ?
Di minim oda kwantiti we dɛn dɔn list naw na 1000kg.
Wetin na di lida tɛm we dɛn rayt?
Di kɔrɛnt prodak infɔmeshɔn de list 7–15 dez afta dipɔsit, dipen pan spɛsifikɛshɔn ɛn ɔda volyum.
Us infɔmeshɔn a fɔ gi fɔ kot?
Gi di aplikeshɔn, 0.5mm ɔ ɔda tiknɛs we dɛn nid, rol ɔ sheet matirial fɔmat, dimɛnshɔn, fɔm dip, optik rikwaymɛnt, printin ɔ fabrikeshɔn prɔses, kwantiti ɛn dɛstineshɔn.
Bɔt HSQY Plastik Grup
HSQY Plastic Group de saplae PETG sheet matirial s, PET film ɛn ɔda plastic matirial to thermoforming kɔmni dɛm, sayn ɛn displei manifakta dɛm, pak kɔnvɔta dɛm, plastic fabricators, distributɔ dɛm ɛn ɔda profeshɔnal bayer dɛm.
Di prodak infɔmeshɔn we de naw de list fayv PETG prodakshɔn layn dɛn wit 50 tan prodakshɔn kapasiti fɔ ɛvride. Di prodakt dɛn we de inklud tin PETG rol stok, standad sheet matirial s ɛn kɔstɔmayz dimɛnshɔn fɔ difrɛn kɔnvɛnshɔn rikwaymɛnt dɛn.
Fɔ 0.5mm PETG projɛkt, gi di sheet matirial ɔ rol dimɛnshɔn, aplikeshɔn, fɔm ɔ fabrikeshɔn prɔses, optik rikwaymɛnt, kwantiti ɛn dɛstineshɔn so di aprɔpriet spɛsifikɛshɔn kin rivyu.
Daunlod PETG Data Shit
