Faktɔri-dayrɛkt plastic sheet matirial sɔlvishɔn dɛn fɔ di wan dɛn we de bay B2B na di wɔl
Bɔt Wi     Kɔntakt Wi     Tul     Wi Faktɔri     Blɔg     Fri Sampul
Please Choose Your Language

HSQY Plastik Grup Fɔd pak

PP tre
sial film

HSQY Plastic Group de saplae hot-sial lidding film fɔ polypropylene it trey dɛn . Pik izi-pil, lɔk-sil, anti-fɔg ɔ ay-baria rol film fɔ yu tre , it prodak ɛn silin layn.

Rikwest fɔ kot Rikwest fɔ tek wan ɛgzampul

Kɔmpia di fim dɛn we yu kin pik

Fɔ di wan dɛn we de mek it, di wan dɛn we de pak togɛda ɛn di wan dɛn we de sheb di tin dɛn we dɛn de pak.

Lid film rol ɛn wan blak it tre agens wan film prodakshɔn layn
Rol film fɔ kɔmɛshɔnal tre silin
Tipik film tiknes
40–90 μm
Tipik rol wit
150–900 mm
Rifrɛns MOQ fɔ ɛni spɛshal
500–1,000 kg
Rifrɛns prodakshɔn lida tɛm
10–15 wok dez

Rifrɛns rɛnj dɛn kin difrɛn bay di fim strɔkchɔ. Prodakshɔn lida tɛm de stat afta dɛn dɔn kɔnfyus di fayn spɛsifikɛshɔn ɛn ɔda.

Wetin na PP tre silin film?

PP tre siling film na fleksibul rol film we de bon to di rim fɔ wan polypropylene fud tre ɔnda ɔt, prɛshɔn ɛn tɛm we i de de. Dɛn kin kɔl am bak PP tre lidding film ɔ polypropylene tre top film, i kin gi kɔntrol pil, anti-fɔg visibiliti ɔ gas barɛri, dipen pan in kɔnstrɔkshɔn.

Di tre -kɔntakt silin fɔ mach di aktual tre flɛnch. HSQY de saplae BOPET /CPP, BOPP-based ɛn EVOH-kɔntinɛnt opshɔn fɔ ɛvalueshɔn pan di bayer in tre ɛn pak layn.

Lan mɔ BOPET /CPP izi-pil film ɛn EVOH/PP ay-barɛri film.

Aw yu kin pik fim fɔ PP trey dɛn ?

Pik PP tre siling film bay we yu mach di flɛnch matirial, opin stayl, barɛri rikwaymɛnt ɛn prɔses tɛmpracha. Kɔnfɛm di rol dimɛnshɔn dɛn agens di sila, dɔn validet di pak we ful-ɔp insay layn trayal dɛn.

I izi fɔ pul am

Opin wit an

Start wit PP-kompatibl izi-pil gred fɔ rɛdi it, salad ɔ dairy. Chek di peel fos na di temperechur we yu want fɔ opin.

Lɔk sil

Hol wan sil we strɔng pas am

Tink bɔt lɔk sil fɔ sos ɔ distribyushɔn we de put mɔ strɛs pan di sil. Kɔnfɛm aw di kɔshɔma go opin di pak.

Ay barɛri

Ritain di MAP gas miks

Fɔ modifyed atmosfɛs pak, spɛsifa wan EVOH-kɔntinɛnt film ɛn wan kɔmpitabl barɛri tre . Validate gas ritɛnshɔn pan di pak we ful-ɔp.

Ritort di pɔsin

Witstand wan ritort saykl

Pik wan dediket retort film wit wan kɔmpitabl tre . Validate di ful pak yuz di intended prɔses saykl.

Send wan tre sampul if dɛn nɔ no di say we dɛn de sidɔm. Fɔ PP/EVOH/PE ɔ we dɛn kɔt trey dɛn , chɛk us layt kɔntakt di fim na di flɛnch.

Gɛt wan fim rɛkɔmɛndishɔn fɔ yu tre

Sheb di tre strɔkchɔ, pak it ɛn opin rikwaymɛnt wit HSQY.

Rikwest fɔ mek dɛn mach di fim

Kɔmpia PP tre lidding film dɛn

Filta di HSQY rɛnj bay di opin stayl ɔ pak rikwaymɛnt. Ɛni prɔdak gɛt link to in tɛknikal pej.

Filta lidding films bay rikwaymɛnt

Fɔ kot, put di fim nem, di rol dimɛnshɔn ɛn di kwantiti we dɛn nid.

PP tre silin film spesifikeshɔn dɛn

Yuz dɛn kategori rɛnj ya fɔ di fɔs sɔs. Kɔnfɛm di rayt tolɛreshɔn, di rol dimɛnshɔn, di sil pefɔmɛns ɛn di ɔda tɛm fɔ di fim we yu pik.

Bifo yu aks fɔ wan trial rol

Chek di sila in yuzabl wɛb wit, kɔr insay dayamita, maksimal rol dayamita ɛn rikwayd silan-sayd wayndin dairekshɔn.

View HSQY tre sial dɛn
Rikwest kɔstɔm rol spɛshal dɛn Rikwest fɔ tek wan ɛgzampul

Di tebul we de kam biɛn ya de sɔmariz kɔmɔn opshɔn dɛn we de akɔdin to di HSQY PP tre lidding-film kategori. Eksakt spesifikeshɔn dɛn dipen pan di strɔkchɔ we dɛn dɔn pik, di kayn sil, di barɛri lɛvɛl ɛn di tin dɛn we dɛn nid fɔ mek.

HSQY PP tre lidding film reference specifications
Prodakt Nem Hɛt-Silabl Liding Film fɔ PP Fud tre s
Kɔmɔn Film Strukchɔ BOPET /CPP, BOPP-based film, PET/PE wit wan PP-kompatibl silan, EVOH/PP ɛn ɔda kɔstɔmayz maltilayer strɔkchɔ dɛn
Kɔmɔn Tiknɛs Rɛnj Na lɛk 40–90 μm
BOPET /CPP Rifrɛns Rɛnj Na lɛk 52–90 μm
EVOH/PP Rifrɛns Rɛnj Na lɛk 40–90 μm
Rol Width lεk 150–900 mm, wit kכstכm slitin we de
Sɛlekt Width Opshɔn 150 mm, 180 mm, 320 mm, 400 mm, 640 mm ɛn kɔstɔm wit dɛn
Rifrɛns Rol Lɛngth Kɔr 500 m fɔ sɔm strɔkchɔ dɛn we dɛn dɔn pik; kɔstɔm rol lɔng we de
Dayamita Customized akɔdin to di tre siling mashin
Apiyans Klia, ay-glos, mat ɔ kɔstɔm print
Sil Opshɔn I izi fɔ pul, kɔntrol pil, ɔt ɛn kol pil, bɔrst pil, lɔk sil ɔ pɔrmanent sil
Fɔnshɔnal Opshɔn Anti-fɔg, ay barɛri, pankchɔ-rɛsistant, kɔntaminɛshɔn silin, printabl, pɔrfɔret, sɛlf-vent ɛn sɛlɛkɛt ɔt-trit gred dɛn
Pakɛj Mɛtɔd Standart tre siling, modifyed atmosfɛs pak ɛn sɛlɛkɛt ɔt-tritmɛnt sistɛm dɛn
Kɔmpatibl Ikwipmɛnt Manual, semi-otomatik, rotary ɛn ful ɔtomɛtik tre silin mashin dɛn afta layn tɛst
Taypikal Aplikeshɔn Ridi it, mit, bɔd, sifud, dairy prodakt, salad, prodɔkt, bekeri it ɛn kol pripia it
Rifrɛns MOQ lεk 500–1,000 kg pan wan strכkchכ כ spεsifikεshכn
Rifrɛns Lid Taym Sampul Aprɔksimatli 10–15 wok de afta di fayn spɛsifikɛshɔn ɛn ɔda kɔnfɔmeshɔn
Sɔpɔt Sampul film ɔ trayal rol dɛn kin tɔk bɔt fɔ tre , mashin, pil, barɛri ɛn ɔt tɛst

Di listed rεnj dεm kכmbayn mכltipכl HSQY film strכkchכ dεm. Wan las kot fɔ sho di rayt fim kɔnstrɔkshɔn, wit, tik, di kayn sil ɛn diman we dɛn kin aks fɔ ɛvri ia.

Fresh rɛd mit insay klia-lid it tre fɔ modify atmosfɛs pak

Lidding films fɔ yu it aplikeshɔn

Rɛdi it
Rivyu izi peel, anti-fɔg ɛn validet maykrowev ɔ ventin opshɔn dɛn.
Mit, pɔltri ɛn sifud
Chɛk pankchɔ rɛsistɛns ɛn evaluate barɛri pefɔmɛns fɔ MAP .
Salad ɛn fresh prodɔkt
Spɛsifik anti-fɔg fɔ kol displei. Asɛs gas ɛkshɛnj fɔ prodyuz we de blo.
Dairy, desserts and bakery
Tink bɔt di kɔntrol peel, klia ɛn print fɔ di pak we yu want.
Tɔk bɔt aw yu de yuz fɔ it

Teknik gayd fɔ tre ɛn fim trayal

Fɔ wan PP tre film trayal, gri di film strɔkchɔ ɛn rol dimɛnshɔn, establish wan silin winda, dɔn tɛst di peel fɔs, lik ɛn pefɔmɛns ɔnda di intended stɔrɔj ​​ɔ ɔt kɔndishɔn.

Film ɛn flɛnch

Wetin Na Sial Film fɔ PP Trey?

Siling film fɔ PP trey dɛn , we dɛn kin kɔl bak PP tre lidding film ɔ polypropylene tre top film, na fleksibul rol film we dɛn mek fɔ ɔt-sial prɛfɔm polipropilene it trey dɛn , kɔp ɛn kɔntena.

Di film de posishun oba wan ful tre ɛn bon to di tre flɛnch bay we dɛn de aplay kɔntrol ɔt, prɛshɔn ɛn tɛm fɔ de. Dipen pan di film strɔkchɔ, di pakej we dɔn dɔn kin gi izi-pil opin, lɔk-sil klos, anti-fɔg pefɔmɛns, ɔksijɛn barɛri, mɔstɔ barɛri, pankchɔ rɛsistɛns, stim ventin ɛn print branding.

HSQY de saplae BOPET /CPP, BOPP-based, PET/PE ɛn EVOH-kɔntinɛnt lidding film fɔ kɔmpitabl PP trey dɛn . Di aplikeshɔn dɛn we de na rɛdi it, kol it, mit, bɔd, sifud, dairy prodak, salad, prodɔkt, bekeri prodak ɛn modifyed atmosfɛs pak.

Film kompitibiliti de ditarmin bay di tre -kontakt silan layt, nɔto jɔs bay di nem fɔ di film in ɔda layt. Di ekzak film fɔ tɛst wit di kɔmɛshɔnal PP tre , pak it ɛn tre silin mashin bifo mas prodakshɔn.

Wetin Mek PP Trey Siling Kɔmpatibiliti Impɔtant

PP trey dɛn kin difrɛn pan rɛsin gred, kɔpɔlimɛr kɔntinyu, risaykul kɔntinyu, kɔlɔ, sɔfayz tritmɛnt, flɛnch jɔyometri ɛn tɛmfɔmin kɔndishɔn. dis difrεns kin chenj di sil-initiashכn tεmprachכ, di fכs fכ pil εn di pak in intagriti.

Tu trey dɛn we dεn dεskrεb as polypropylene kin nכ gi idεntikal siling pεrformεns wit di sem film.

Trey Strukchɔ Tipik Rikwaymɛnt Film Sɛlɛkshɔn Gaydɛns
Mono-PP Trey we dɛn kin yuz Dairekt silin to wan polipropilɛn flɛnch Yuz wan PP-kɔmpatibl CPP, modifyed polyolefin ɔ aplikeshɔn-spɛsifi k silan layt
PP/EVOH/PP Trey we dɛn kin yuz PP siling surface we dɛn kam togɛda wit wan intanɛnt gas-baria layt Match wit wan PP-kompatibl ay-baria film fכ MAP כ כksijεn-sεnsitiv it
PP/EVOH/PE Trey we yu de yuz Di siling surface kin bi PP, PE ɔ ɔda spɛsifikɛd layt Kɔnfɛm di aktual flɛnch-kɔntakt layt bifo yu pik di fim
Tray PP we dɛn kɔt Kɔtin de kɔntrol di we aw di sil de biev Test di film agens di ekzak kotin fɔmyulashɔn
Risaykul-Kɔntinɛnt PP Trey Surface εn thermal bihayvya kin difrεn wit fכmyuleshכn Validate di sil trɛnk, di peel kɔnsistɛns, smel ɛn it-kɔntakt rikwaymɛnt

Fizik tre sεmpl dεm dεn rεkכmand fכ sεlekt כ divεlכp nyu PP lidding-film spεsifikεshכn.

Kɔmɔn PP trey lid film strɔkchɔ dɛn

BOPET /CPP Lidin Film

BOPET /CPP lidding film de kam togeda wan biaxially oriented polyester outa layt wit wan kas polypropylene tre -kontakt layt.

BOPET de gi optik klia, tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti ɛn wan say we dɛn kin print. CPP de gi ɔt silin ɛn dɛn kin fɔmulayt am fɔ izi-pil ɔ strɔng lɔk-sil pefɔmɛns pan kɔmpitabl PP sɔfays.

Rilat HSQY prodakt dɛn inklud    lok-sil BOPET /CPP lid film    ɛn    izi-pil BOPET /CPP lid film.

BOPP-Based Lidding Film we gɛt fɔ du wit di tin dɛn we dɛn dɔn mek

BOPP de gi lɔw density, klia, mɔstɔ rɛsistɛns ɛn kɔmpatibiliti wit PP-fɔs pak dizayn dɛn.

Di film kin inklud wan modifyed PP, CPP, PE ɔ ɔda sialant layt. Di fim nem we dɛn dɔn pablish nɔmɔ nɔ de gi garanti fɔ dairekt sial to ɛvri PP tre .

EVOH/PP High-Barrier Film we de mek yu fil

EVOH/PP film inkorpor wan EVOH layεr fכ ridyus כksijεn εn gas transmishכn we PP-bεys layεr dεm de gi mεkanikal pεrformεns εn tre -siling kכmpatibiliti.

Dɛn kin pik am fɔ MAP , mit, sifud, dairy, it we dɛn dɔn pripia ɛn ɔda tin dɛn we gɛt ɔksijɛn.

Si HSQY in dɛn    EVOH/PP ay-barɛri film.

BOPP/EVOH Multilayer lid film

Wan BOPP/EVOH multilayer film de kam togɛda BOPP optik ɛn mɔstɔ pefɔmɛns wit EVOH ɔksijɛn barɛri ɛn wan aplikeshɔn-spɛsifi k ɔt-sil layt.

Di tre -kɔntakt layt fɔ mach to di aktual PP tre flɛnch. We wan strɔkchɔ we dɛn dɔn pablish gɛt PE layt, dɛn fɔ verify dairekt kɔmpatibiliti wit mono-PP tru silin trayal.

Si di tin dɛn we gɛt fɔ du wit dis    BOPP/EVOH multilayer lok-sil film.

Yunivasal-Sil ɔ Modifyed Silan Film

Sɔm fim dɛn de yuz modifyed polyolefin sialant dɛn we dɛn mek fɔ sial sɔm tre matirial dɛn, lɛk PP, PE, PET ɔ PS .

Yunivasal kompitibiliti nɔ fɔ bi asum. di sem film kin prodyuz difrεn peel fכs, sil apinεns εn lik rεsistεns pan difrεn tre surface dεm.

I izi fɔ Pil, Lɔk Sil ɛn Ɔda Opshɔn dɛn fɔ Opin
Sil Tayp Opin Biɛvhɔ Tipik Aplikeshɔn dɛn Men Kɔnsidɛreshɔn
I izi fɔ Pil Pil am smɔl smɔl wit an Salad, dairy prodak, dɛzat ɛn kɔshɔma rɛdi it Must balans pakej sekuriti wit konvinyent opin
Hot ɛn Kol Pil Dɛn mek am fɔ pul am ɔltɛm bifo ɔ afta i dɔn ɔt am bak Chilled ready meals ɛn sɔm it dɛn we dɛn dɔn pik we dɛn dɔn ɔt Di peel pefɔmans fɔ tɛst na di aktual savis tɛmpracha
Burst Peel we dɛn kɔl Rilis pan wan kɔntrol intanɛnt prɛshɔn Stiam-venting maykrowev it dɛn Rilis prɛshɔn fɔ mach to it ɛn ɔt kɔndishɔn
Lɔk Sil we dɛn kɔl Strɔng ɔ nɔ kin pul kloz Sos, it we gɛt likwid, mit ɛn dimand distribyushɔn I kin nid fɔ kɔt ɔ pank fɔ opin
Pil ɛn Risil Yu kin opin ɛn lɔk am bɔku tɛm Chiz, deli it ɛn mɔlti-yuz pat dɛn Rikways wan dediket risilable film ɛn tre dizayn

Aplikeshɔn dɛn fɔ PP Film we de sial di trey

Chilled Ready Meals we dɛn dɔn mek fɔ it

PP trey dɛn εn kompitibl lidding film dεm dεn de yuz fכ pasta, rays, mit we dεn kuk, vεgεtebul, sos, kכri εn mכlti kכmכpכnt it dεm.

Di fim dɛn we dɛn dɔn rɛdi fɔ it kin nid fɔ izi fɔ pul dɛn, fɔ mek dɛn nɔ gɛt fɔg, fɔ mek dɛn ɔt bak na maykrowev, fɔ mek dɛn stim vent ɔ fɔ mek dɛn nɔ gɛt pastɔrayzeshɔn.

Fresh Mit ɛn Pɔltri

Yu kin yuz liding film we gɛt ay barɛri ɛn we nɔ de panch fɔ bif, bɔd, ship, mins mit, sosish, chukchuk ɛn tik we dɛn pak insay PP-based trey dɛn .

di prodakt dεm we de insay bon kin nid hכy pankshכn rεsistεns, dip trey dɛn εn rilibul sial tru limited mכsichכ כ gris kכntaminεshכn.

Fish ɛn Sifud

Di aplikeshɔn dɛn na fish filɛt, shrimps, shelfish, sifud pat ɛn sifud we dɛn dɔn pripia.

Sifud pak fɔ validet fɔ pank, likwid rilis, gas miks, tɛmpracha ɛn maykrobayolojikal risk.

Dairy ɛn Chiz

PP tre lidding film dεm kin yus fכ chiz pat dεm, bכta prodakt, dairy dεsεt, yogכt-bεys it dεm εn kol dairy fud dεm.

Chiz pak kin nid fɔ kɔntrol gas permeabiliti, izi fɔ pul ɔ pul-ɛn-risial funkshɔnaliti.

Salad ɛn Deli Fɔd

Fim dɛn we izi fɔ pul ɛn anti-fɔg fayn fɔ salad, kol nuts, vɛjitebul dɛn we dɛn dɔn pripia, deli it dɛn, dip ɛn sayd dish dɛn we dɛn dɔn kol.

Fresh Frut ɛn Vɛjitebul dɛn

PP prodyuz trey dɛn kin sial wit transparent, anti-fog ɔ perforated lidding film fɔ bɛri, tomato, kɔt frut, vɛjitebul ɛn mushroom.

Fresh prodɔkt kin kɔntinyu fɔ blo afta dɛn dɔn pak am, so dɛn kin nid fɔ mek maykroperforeshɔn ɔ kɔntrol gas transmishɔn instead ɔf wan ful-hay-baria film.

Bekeri ɛn Desɛt dɛn

Kek, paste, dɔti prodak, kɔnfɛkshɔn, pudin ɛn kol dɛzat kin yuz klia ɔ print PP-kɔmpatibl lidding film.

Fɔd dɛn we dɛn dɔn frɔz

Dɛn kin evalyu di fim ɛn PP tre gred dɛn we dɛn dɔn pik fɔ frɔzɛn it, mit, sifud, vɛjitebul ɛn dɛzat.

Lɔw-tɛmpracha fleksibiliti, impak rɛsistɛns ɛn sil intɛgriti fɔ tɛst ɔlsay na friz, transpɔt ɛn thaw.

Fɔd ɛn di we aw dɛn kin du am

High-Barrier Film fɔ PP MAP tre s

modifyed atmosfɛs pak de riples mɔs pan di nɔmal ɛya insay di tre wit wan kɔntrol gas miksɔp bifo dɛn sial am.

wan standad PP liding film kin nכ gi inof כksijεn barεri fכ MAP . כksijεn-sεnsitiv it kכmכn wan nid fכ film we gεt EVOH כ כda ay-baria layεr.

Wan kɔmplit MAP sistɛm fɔ tink bɔt:

  • PP tre barɛri strɔkchɔ

  • Lidding-film ɔksijɛn transmishɔn rit

  • Wata-vapour transmishɔn rit

  • Fɔd-spɛsifi k gas miksɔp

  • Ɔksijɛn we lɛf afta dɛn dɔn sidɔm

  • Gas-to-prɔdakt rεshɔn

  • Flange klin ɛn sil integriti

  • Stɔrej ɛn transpɔt tɛmpracha

  • Target distribyushɔn tɛm ɛn shelf layf

Di kɔstɔma dɛn we de divɛlɔp MAP pak kin rivyu HSQY dɛn    MAP trey dɛn,    ay-baria PP trey dɛn    ɛn    PP/EVOH/PE trey dɛn.

Kɔmɛshɔnal shelf-layf klem fɔ sɔpɔt bay paket-intɛgriti, gas-ritɛnshɔn, maykrobayolojikal ɛn sɛns tɛst we yu de yuz di aktual it ɛn pak sistɛm.

Anti-Fog Lidding Film fɔ PP Trey dɛn

Anti-fɔg film de ridyus di wata drɔp dɛn we pɔsin kin si bay we i de spre kɔndens mɔstɔ insay wan tin transparent layt.

I fayn fɔ it kol, mit, sifud, salad, prodɔkt ɛn it we dɛn pak wam ɛn afta dat dɛn kin kol am.

Anti-fog pefɔmɛns dipen pan:

  • Kɔrɛkt ɔriɛnteshɔn fɔ di anti-fɔg sayd

  • Fɔd filin tɛmpracha

  • Fɔd mɔstɔ lɛvɛl

  • Spid we i de kol

  • Tɛmpratura fɔ kip tin dɛn na frij

  • Di tɛm we di kol-chen kin tek

  • Anti-fog kotin ɔ aditiv fɔmyulashɔn

Film sɛmpul dɛn fɔ tɛst wit di aktual it ɛn kol-chen saykl bifo dɛn apruv anti-fɔg pefɔmɛns.

Sial Tru Mɔstɔ, Ɔyl ɛn Fɔd Kɔntaminɛshɔn

Wata, sos, oil, fεt εn sכm sכm it patikyula dεm na di tre fכn kin intarap di sil εn mek lik chεnal dεm.

Di fim dɛn we dɛn dɔn pik fɔ sial kɔntaminɛshɔn kin ebul fɔ bia wit smɔl mɔstɔ ɔ gris, bɔt nɔ fim nɔ fɔ tek ples fɔ gud filin-layn kɔntrol ɛn flɛnch klin.

Kontamineshɔn-silin tɛst fɔ yuz di aktual it rɛsɛdyu, layn spid, silin tul ɛn frij kondishɔn prɔses.

Maykrowev ɛn Ɔt-Tritmɛnt Pɔfɔmɛnshɔn

Yu tink se PP Trey Lidding Film kin bi Maykrowev?

Dɛn kin divɛlɔp sɔm fim gred dɛn we dɛn dɔn pik fɔ maykrowev rihit, bɔt dɛn nɔ fɔ diskrayb wan fim as maykrowev-sef ɔl bikɔs i sial to wan PP tre .

Maykrowev tɛst fɔ tink bɔt di film strɔkchɔ, tre , it kɔmpɔzishɔn, maykrowev pawa, ɔt tɛm ɛn stim-rilis instrɔkshɔn.

Yu tink se dɛn nid fɔ kɔt di fim bifo dɛn ɔt am?

Sɔm paket dɛn kin mek di pɔsin we de bay fɔ chuk di fim ɔ pul wan kɔna bak bifo i wam am. Ɔda paket dɛn de yuz sɛlf-venting film, lɛsa skɔring, maykroperfɔreshɔn ɔ prɛshɔn-aktivɛt bɔrst pil.

Di instrɔkshɔn dɛn fɔ ɔt di kɔstɔma dɛn fɔ bi bays pan validet paket tɛst dɛn.

Yu tink se dɛn kin pasteurize PP Lidding Film?

Na wan fim gred we dɛn kin trit wit ɔt we dɛn dɔn divɛlɔp fɔ di tɛmpracha ɛn di tɛm we dɛn nid fɔ pastɔrayzeshɔn nɔmɔ dɛn fɔ yuz.

Standart BOPET /CPP ɔ BOPP fim dɛn we de na dis kategori nɔ fɔ ɔtomɛtik fɔ promot fɔ pastɔrayzeshɔn we nɔ gɛt prodak-spɛsifi k validɛshɔn.

Yu tink se dɛn kin ritort PP tray film?

Standard PP tre lidding film nɔto ɔtomɛtik wan fayn fɔ retort prɔsesin.

Ritort aplikeshɔn dɛn nid fɔ gɛt wan dediket strɔkchɔ we dɛn validet fɔ prosɛs tɛmpracha, prɛshɔn, durayshɔn, it kɔmpɔzishɔn ɛn post-rɛtɔt pakej intɛgriti.

Yu tink se yu kin yuz PP Trey Lidding Film na Kɔnvɛnshɔnal Ɔvin?

Kɔnvɛnshɔnal-ɔvin yus jɔs nɔto standad aplikeshɔn fɔ PP trey dɛn ɔ standad PP lidding film dɛn.

Aplikeshɔn dɛn we nid kɔvɛnshɔnal-ɔvin ɔt fɔ yuz wan pɔpɔshɔn-disayn ɔvinable tre -ɛn-film sistem, lɛk wan aprɔpriet validet CPET pakej.

Sial layn ɛn rol dɛn

Mashin fɔ Sial Tray Kɔmpatibiliti

PP lidding film kin yuz pan manual, semi-otomatik, rotary ɛn ful ɔtomɛtik tre sila dɛn we di rol dimɛnshɔn ɛn siling kwaliti dɛn mach di ikwipmɛnt.

Di wan dɛn we de bay fɔ kɔnfɔm:

  • Mashin manifakta ɛn mɔdel

  • Tray mold ɛn kaviti layout

  • Nɔmba fɔ trey dɛn fɔ wan saykl

  • Maksimal fim wit

  • Kor insay dayamita

  • Maksimal rol ausayd dayamita

  • Maksimal wet we di rol gɛt

  • Unwind di dairekshɔn

  • Sialant layt wund insay ɔ na do

  • Sil-plet tɛmpracha rɛnj

  • Dwɛl tɛm

  • Prɛshɔn fɔ sial

  • Layn spid ɛn trey dɛn fɔ wan minit

  • Di we aw dɛn kin kɔt fim

  • Sensa fɔ rɛjista-mak

  • MAP gas-flush fכnshכn

HSQY de saplae bak    it tre siling mashin    fɔ standad ɔt silin ɛn modifyed atmosfɛs pak.

Aw fɔ Establish di Kɔrɛkt Silin Windo

di siling winda na di rεnj כf tεmprachכ, prεshכn εn dεlεd tεm we de prodyuz wan rilibul sil we nכ de damej di film כ PP tre .

Wan kɔmɛshɔnal silin trayal fɔ evalyu:

  • Minimum sil-initiashɔn tɛmpracha

  • Maksimal temperechur bifo film ɔ tre distɔrshɔn

  • Minimum ifektiv tɛm fɔ de

  • Prɛshɔn we dɛn nid fɔ sial

  • Sial trɛnk wantɛm wantɛm afta yu dɔn sial

  • Pil fos afta yu dɔn kol

  • Pil fos afta yu dɔn kip am na frij

  • Pil fɔs afta yu dɔn rihit we i apɔynt

  • Pɔfɔmɛnshɔn wit mɔstɔ ɔ gris kɔntaminɛshɔn

  • Sial kɔnsistɛns na prodakshɔn spid

  • Film shrinkage ɛn wrinkle fɔmɛshɔn

  • Tray-flange distɔrshɔn

  • Lik ɛn bɔrst pefɔmɛns

Nɔto ɔltɛm we di tɛmpracha de go ɔp na di kɔrɛkt sɔlvishɔn fɔ wik sil. Film oriɛnteshɔn, tre kɔmpatibiliti, silin prɛshɔn, tul flatnɛs ɛn flɛnch kɔntaminɛshɔn fɔ chɛk bak.

Rol Width, Rol Length ɛn Windin Dairekshɔn

Wan kɔmplit rol-film spɛsifikɛshɔn fɔ inklud mɔ pas di nominal film wit.

  • Finished film wit

  • Total film tiknes

  • Rol lɔng

  • Kor insay dayamita

  • Maksimal rol ausayd dayamita

  • Maksimal wet we di rol gɛt

  • Sialant sayd wund insay ɔ na do

  • Di sayd ɔriɛnteshɔn we dɛn print

  • Artwok ripit lɔng

  • Rejista-mak pozishɔn

  • Nɔmba fɔ di len dɛn we dɛn kin pak

  • Splais ɛn jɔyn rikwaymɛnt dɛn

If yu nɔ yuz di rayt we aw yu de waynd, dat kin mek yu put di layt we de sidɔm na di rɔng say ɛn mek yu nɔ go ebul fɔ yuz di rol na di layn we dɛn de pak am.

Kɔmɔn PP Trey Siling Prɔblɛm dɛn
Prɔblɛm Posisibul Kɔz Aytem dɛn fɔ Chɛk
Film Nɔ De Sial Silant we nɔ kɔmpitabl, rivas film, lɔw tɛmpracha ɔ po tul kɔntakt Film siling sayd, PP tre fכmyuleshכn, tεmprachכ, prεshכn εn dwεl tεm
Wik ɔ Inkɔnsistɛns Sil Kɔntaminɛshɔn, nɔ ivin tre flɛnch, nɔ stebul tɛmpracha ɔ insufisɛnt silin prɛshɔn Flɛnch klin, tul flatnɛs, mashin kɔntrol ɛn tre dimɛnshɔn
Peel Force Na Tu Ay Dɛn bin pik di tɛmpracha we pasmak, di tɛm fɔ de ɔ di prɛshɔn, ɔ di rɔng kayn sil Kɔnfɛm izi-pil gred ɛn establish wan kɔntrol silin winda
Peel Force Na Tu Low Insufishɛnt ɛnaji fɔ sial ɔ wan fɔmyulashɔn we nɔ fayn fɔ izi fɔ pul Film gred, tre surface, temperechur, prɛshɔn ɛn kondishɔn tɛm
Film Tears We Dɛn De Opin Di trɛnk we di sil gɛt pas di trɛnk we di fim gɛt, di fim dɔn pwɛl ɔ di tab we de opin tu smɔl Film tiknes, peel fos, tre edj ɛn tab dizayn
Wrinkles na di Sil Nɔ ivin wɛb tɛnsiɔn, po trak, distɔrj trey dɛn ɔ tul misalaynmɛnt Rol trakin, unwind tɛnsiɔn, tre pozishɔn ɛn sil-plet flatnɛs
Pakɛj Lik dɛn Fɔd na di flɛnch, chanɛl lik, pankchɔ, damej trey dɛn ɔ inkɔmplit siling Flɛnch klin, film intɛgriti, tre kɔndishɔn ɛn kɔmplit sil kɔntinyuiti
Film Balɔn dɛn We Dɛn De Hɛt Stiam prɛshɔn de bil insay wan paket we nɔ gɛt vent Vent dizayn, perforeshɔn, burst peel ɛn kɔshɔma ɔt instrɔkshɔn
Poor Anti-Fɔg Pɔfɔmɛnshɔn Anti-fog sayd rivεs, nכ fit gred כ pasmak kכndεns Film oriɛnteshɔn, prodakt tɛmpracha, mɔstɔ ɛn kol-chen saykl
Film Delamination Po adhesive cure, pasmak ɔt, ɔyl ɛksplɔshɔn ɔ inadequate lamination bond Film ej, laminate bond, fud kompozishun ɛn ɔt-tritmɛnt kɔndishɔn

Film we dɛn kɔl PP trey lidding we dɛn print na kɔstɔm

PP tre lidding film kin print wit brand logo, prodak nem, nyutrishɔn infɔmeshɔn, ɔt instrɔkshɔn, barɔd, QR kɔd ɛn prɔmoshɔnal grafik.

Di wok dɛn we dɛn kin du fɔ print fim dɛn kin nid:

  • Fayl dɛn we dɛn kin ɛdit fɔ du artwok

  • Finished film wit

  • Print ripit lɔng

  • Nɔmba fɔ di kɔlɔ dɛn

  • Pantone ɔ apruv kɔlɔ rɛfrɛns dɛn

  • Print dairekshɔn

  • Rejista-mak pozishɔn

  • Tray orientation in di siling mold

  • Sialant sayd wund insay ɔ na do

  • Rikwayd mat ɔ glos finish

  • Fɔd-kɔntakt ɛn fɔ ɔt tin dɛn we dɛn nid

Print ink ɛn adeziv dɛn fɔ pik akɔdin to di it-kɔntakt strɔkchɔ ɛn ɛni maykrowev, pastɔrayzeshɔn ɔ friz kɔndishɔn.

Kastom PP trey lidding film opshɔn dɛn

  • Kastom BOPET /CPP ɔ BOPP-bɛs strɔkchɔ

  • Tik we dɛn kin tik di fim we dɛn kin kɔstɔm

  • Kastom PP-kompatibl silant fɔmyulashɔn

  • I izi-pil, kɔntrol-pil ɔ lɔk-sil pefɔmɛns

  • Customized hot ɛn kol peel fɔs

  • EVOH ay-barɛri layt

  • Kastom OTR ɛn WVTR target dɛn

  • Anti-fɔg tritmɛnt

  • Fɔmyulashɔn we de silin kɔntaminɛshɔn

  • Struktrɔ we nɔ de pan pankchɔ

  • Friza-grɛd strɔkchɔ

  • Selekt maykrowev ɔ pasteurization gred

  • Stiam-ventin, maykroperforated ɔ burst-pil dizayn

  • Opshɔn fɔ pul ɛn risil

  • Kastom logo ɛn grafik dɛn

  • Kastom film wit ɛn rol lɔng

  • Kastom kor ɛn maksimal rol dayamita

  • Kastom winding dairekshɔn

  • Mak dɛn fɔ rɛjista fɔ ɔtomɛtik mashin dɛn

  • PP-based dizayn-fɔ-risaykul strɔkchɔ we de ɔnda tɛknikal rivyu

  • Kastom katon, lɛbl ɛn ɛkspɔt palet

Kwaliti ɛn saplai

Fɔ Kɔmplians fɔ Fɔd-Kɔntakt

Fɔd-kɔntakt suitabiliti dipen pan di ɛksaktɔl rɛsin, silan, EVOH layt, adeziv, anti-fɔg tritmɛnt, printin ink, di kayn it, di kɔntakt durayshɔn ɛn yuz tɛmpracha.

Di wan dɛn we de bay fɔ tɔk klia wan se:

  • Di kɔntri ɔ rijyɔn usay dɛn de go

  • Di kayn it we dɛn kin it

  • Dairekt kondishɔn fɔ kɔntakt it

  • Di tɛm we pɔsin fɔ kɔntakt

  • Ambient, chilled ɔ frɔzɛn stɔrɔj

  • Maykrowev ɔ pasteurization kɔndishɔn dɛn

  • Fim we dɛn print ɔ we dɛn nɔ print

  • Diklareshɔn ɔ maykreshɔn tɛst dɛn we dɛn nid

  • Restricted-substance rikwaymɛnt dɛn

  • Batch ɛn traceability rikwaymɛnt dɛn

Dɛn fɔ kɔnfyus di dɔkyumɛnt fɔ di rayt fim spɛsifikɛshɔn ɛn di aplikeshɔn we dɛn want fɔ yuz. Ripɔt fɔ wan film strɔkchɔ nɔ fɔ ɔtomɛtik aplay to ɛvri tik, silan, kɔtin ɔ ink sistɛm.

Na PP Film we de sial di trey Risaykul?

Risayklɛbiliti dipen pan di kɔmplit tre -ɛn-film strɔkchɔ ɛn lokal risaykul infrastukchɔ.

wan BOPET /CPP כ PET/PE laminat gεt difrεn polimכr famili dεm εn i nכ fכ כtomatכk dεskrεb am as mכno-matεrial כ risaykul wit PP trey dɛn .

Wan PP-rich ɔ mono-PP-kɔmpatibl lid strɔkchɔ kin sɔpɔt wan dizayn-fɔ-risaykul pakej we:

  • Di tre ɛn fim na PP mɔ

  • Barɛri ɛn tay layers de kɔntinyu fɔ de insay di limit dɛn we dɛn aksept

  • Ink ɛn adeziv dɛn mit di rilevɛns dizayn gaydlayn dɛn

  • Di paket na di dɛstineshɔn risaykul sistɛm aksept am

  • Ɛni risaykul klem, dɛn sɔpɔt am bay di rayt tɛst ɔ sɛtifiket

HSQY kin evalyu PP-based strɔkchɔ fɔ sastaynabiliti-lid prɔjek dɛm, bɔt dɛn fɔ kɔnfyus di avaylabl, risaykul kɔntinyu ɛn risaykul klem fɔ di ɛksaktɔl pakej.

Kwaliti Kontrol fɔ PP Trey Lidding Film

Stebul lidding-film kwaliti de ɛp fɔ ridyus lik, inkɔnsistɛns pil, film west ɛn pak-layn dawt tɛm.

Di tin dɛn we gɛt fɔ du wit inspekshɔn kin bi:

  • Film strɔkchɔ ɛn rɛsin verifyeshɔn

  • Tɔtɔl tik ɛn tolɛreshɔn

  • Individyual layt distribyushɔn we dɛn spɛsifa

  • Rol wit tolɛreshɔn

  • Rol lɔng ɛn wet

  • Kor saiz ɛn rol dayamita

  • Winding tension ɛn rol alaynɛshɔn

  • Transparency, haze ɛn glos

  • Surface skrat, jel ɛn kɔntaminɛshɔn

  • Lamineshɔn-bɔnd trɛnk

  • Sil-initieshɔn pefɔmɛns

  • Sial trɛnk ɛn peel fɔs

  • Hot ɛn kol peel kɔnsistɛns

  • Anti-fog pefɔmɛns

  • Pankchɔ ɛn tɛnsiɛl rɛsistɛns

  • OTR ɛn WVTR we dɛn spɛsifa

  • Maykrowev ɔ pasteurization tɛst we nid de

  • Print kɔlɔ ɛn rɛjista kɔrɛkt wan

  • Paket ɛn palet protɛkshɔn

Packaging, Storage ɛn Intanɛshɔnal Shipin

PP tre siling-film rol dεm nכmal fכ protεkt frכm dכst, mכsichכ, impak εn rol-εj damej.

Di tin dɛn we yu kin pik fɔ pak tin dɛn kin bi:

  • Bag dɛn we de protɛkt pɔsin insay

  • Protektɔ dɛn we gɛt rɔl-ɛnd

  • Wan wan ɛkspɔt katon dɛn

  • Batch ɛn prodakt lɛbl dɛn

  • Palet strɛch wrapping

  • Kɔna ɛn edj protɛkshɔn

  • Fumigation-fri ɛkspɔt palet dɛn

  • Kastom palet ayt ɛn shiping mak dɛn

Dɛn fɔ kip di rol dɛn na dɛn ɔrijinal pak na klin, dray ples we nɔ gɛt dairekt san layt, ay humidity, ɔt pasmak ɛn bɔdi damej.

Wetin Mek Yu Pik HSQY as Yu PP Film we de sial di trey Manufacturer?

  • Bɔku fim strɔkchɔ dɛn: BOPET /CPP, BOPP-based, PET/PE ɛn EVOH-kɔntinɛnt film dɛn de.

  • I izi fɔ pul ɛn lɔk-sil opshɔn dɛn: Dɛn kin mek di opin pefɔmɛns mach to di it ɛn distribyushɔn sistɛm.

  • hεy-baria film dεm: dεn kin evaluate strכkchכ dεm we gεt EVOH fכ MAP εn כksijεn-sεnsitiv it dεm.

  • Anti-fog opshɔn dɛn: Fim dɛn de fɔ it kol ɛn frij rital displei.

  • Kastom rol spesifikeshɔn dɛn: Wid, lɔng, kɔr, rol dayamita ɛn wayndin dairekshɔn kin kɔstɔmayz.

  • Kastom printin: Yu kin ad logo, grafik, instrɔkshɔn ɛn rɛjista mak.

  • Trey-ɛn-film maching: Rikɔmɛndishɔn kin bi bays pan aktual PP tre sɛmpul ɛn siling trayal.

  • Pakɛj-layn sɔpɔt: Dɛn kin rivyu di fim agens manual, sɛmi-ɔtomɛtik ɛn ful ɔtomɛtik tre sila dɛn.

  • Trial-roll support: Dɛn kin ebul fɔ evaluate sampul dɛn bifo kɔmɛshɔnal prodakshɔn.

  • Komplit pak saplae: HSQY de saplae PP trey dɛn , ay-baria trey dɛn , MAP trey dɛn ɛn siling ikwipmɛnt bak.

  • Ekspɔt savis: Kastɔm ​​katon, palet ɛn intanashɔnal shiping sɔpɔt de.

Pripia wan trayal pan yu silin layn

Sheb yu sila mɔdel, kɔrɛnt sɛtin ɛn tre sampul fɔ tɔk bɔt fim sɛlɛkshɔn ɛn di tɛst rikwaymɛnt dɛn.

Tɔk bɔt yu sial trial Rikwest fɔ tek wan ɛgzampul

PP tre sial film FAQ

Ansa to kɔmɔn kwɛstyɔn dɛn bɔt aw fɔ bay ɛn pak-layn.

Wetin na PP tre siling film we dɛn mek wit?

PP tre siling film kin yuz BOPET /CPP, BOPP-based ɔ EVOH/PP multilayer strɔkchɔ dɛn. Di tre -kɔntakt silant na fɔmulayt fɔ di aktual polipropilɛn flɛnch. BOPET /CPP de kכmbayn wan polyεsta כta layεr wit wan kכst polypropylene siling layεr, we wan EVOH layεr de ad כksijεn-baria pεrformεns.

Wetin na di difrɛns bitwin BOPET ɛn CPP?

BOPET nɔmal fɔ gi trɛnk, klia, dimɛnshɔnal stebiliti ɛn printabiliti. CPP de gi di polypropylene-based siling layer ɛn i de kɔntribyut to pankchɔ, fleksibiliti ɛn peel pefɔmɛns.

Wan film kin sial ɛvri PP tre ?

PP tre siling kompitibiliti dipen pan di tre 's resin gred, surface coating ɛn aktual flange-kɔntakt layt. Wan fim fɔ tɛst pan di ɛksaktɔ kɔmɛshɔnal tre bikɔs chenj dɛn na dɛn ficha ya kin chenj di sil trɛnk ɛn di we aw di pil de biev.

Yu tink se PET/PE kin film sial wan PP tre ?

Sɔm PET/PE ɔ modifyed sialant film kin sial to PP, bɔt dis nɔ fɔ asum. Di tre -kɔntakt silin fɔ spɛshal kɔmpitabl wit di PP flɛnch.

Us tiknes fɔ PP tre siling film de?

HSQY in PP tre siling film kategori jεnarali kכba aprכksimatli 40–90 μm. sεlekt BOPET /CPP prodakt dεm dεn list na aprכksimatli 52–90 μm. Kɔnfɔm di tik ɛn tolɛreshɔn fɔ di ɛksaktɔ film strɔkchɔ ɛn di prɔses we dɛn bin want fɔ du.

Us rol widths HSQY kin saplae?

HSQY in PP tre siling film rεnj inklud rol wit dεm we de arawnd 150–900 mm. Kastom slitin kin mach di tre mold ɛn pak mashin. Spɛsifi k kɔr insay dayamita, maksimal rol ɔdasay dayamita ɛn wayndin dairekshɔn wit di wit.

Wetin na di difrɛns bitwin izi fɔ pul ɛn lɔk sil?

Easy-peel film na dizayn fɔ kɔntrol manual opin. Lɔk-sil film de fɔm wan strɔng ɔ nɔ-pilable kloz fɔ big lik rɛsistɛns ɛn tamper ɛvidɛns.

Wetin mek i nɔ izi fɔ opin di fim we izi fɔ pul?

di siling tεmprachכ, prεshכn כ di tεm we di fכs de de kin tu hכy, כ di film kin nכ bi di kכrekt izi-pil fכmyuleshכn fכ di tre .

Wetin mek di fim de rɔtin instead fɔ pul am?

Tearing kin apin we di sil trɛnk pas di film trɛnk, di film dɔn pwɛl, di film gej nɔ du fɔ am ɔ di opin tab nɔ fayn.

Anti-fog film de fɔ PP trey dɛn ?

HSQY de gi anti-fog PP tre lidding film opshɔn fɔ kol it, salad, prodɔkt, mit ɛn sifud. Evaluate di gred we yu dɔn pik wit di it in mɔstɔ lɛvɛl ɛn friji saykl fɔ kɔnfɔm visibiliti ɔnda di displei kɔndishɔn dɛn we yu want.

Yu tink se dɛn kin yuz PP lidding film fɔ MAP ?

PP tre lidding film kin sɔpɔt modifyed atmosfɛs pak ( MAP ) we wan fayn barɛri film de pe wit wan kɔmpitabl barɛri tre . Selekt di film agenst ɔksijɛn transmishɔn rit, wata-vapo transmishɔn rit ɛn di gas miksɔp we yu want. Validɛt di gas ritɛnshɔn ɛn shelf layf pan di pakej we dɛn ful-ɔp.

Si HSQY EVOH/PP ay-baria film fɔ gred sɛlɛkshɔn.

Wetin EVOH de du na PP lidding film?

EVOH (ethylene vinyl alcohol) na wan ɔksijɛn-baria layt we dɛn kin yuz fɔ mek bɔku layers PP liding film dɛn. i de ridyus כksijεn transmishכn εn i de εp wan kכmpatibl MAP pakej fכ kip in gas miksכp. Barɛri pefɔmɛns fɔ ɛvaluet fɔ di kɔmplit tre -ɛn-film pakej.

Yu tink se di fim kin sidɔm tru mɔstɔ ɔ gris?

Di gred dɛn we dɛn dɔn pik fɔ sial kɔntaminɛshɔn kin ebul fɔ bia wit smɔl mɔstɔ ɔ gris. Di tre flɛnch fɔ stil kip am klin as i pɔsibul.

Yu tink se PP tre silin film kin bi maykrowev?

PP tre siling film kin yuz fɔ maykrowev rihit we di spɛsifi k film gred, tre , it ɛn ɔt saykl dɔn validet togɛda. Kɔnfɛm di we aw fɔ mek di vent ɛn di instrɔkshɔn dɛn fɔ opin fɔ di pak we dɔn dɔn.

Us silin tɛmpracha a fɔ yuz fɔ PP trey dɛn ?

Set di siling temperechur fɔ di ɛksaktɔ PP tre ɛn lidding-film gred. Establish wan wok winda bay we yu de tɛst tɛmpracha, prɛshɔn ɛn di tɛm we yu de liv togɛda, dɔn chɛk di sil kɔntinyuiti, di fɔs we yu de pul ɛn di lik na di layn spid we yu nid. Sheb yu setin dɛm we de naw ɛn tre sampul wit HSQY fɔ tɔk bɔt wan trayal.

Tɔk bɔt di we aw yu de sidɔm

Yu tink se maykrowev fim nid stim vent?

I kin nid fɔ pier, instrɔkshɔn fɔ pul bak, fɔ mek pɔrfɔshɔn, fɔ mek yu gɛt sɛlf-venting ficha ɔ fɔ kɔntrol bɔrst peel. Di kɔrɛkt we fɔ du am dipen pan di it ɛn di paket we dɛn mek.

Yu tink se dɛn kin pastɔrayz PP lidding film?

Dɛn kin mek sɔm fim dɛn we dɛn kin trit wit ɔt fɔ pastɔrayzeshɔn. Standart film nɔ fɔ yuz if yu nɔ validet fɔ di tɛmpracha ɛn di tɛm we dɛn nid.

Yu tink se dɛn kin ritort PP lidding film?

Na wan dediket retort-grɛd tre -ɛn-film strɔkchɔ nɔmɔ dɛn fɔ yuz. Standard PP siling film nɔto ɔtomɛtik ritortabl.

Yu tink se yu kin yuz PP tre film fɔ frɔzɛn it?

Dɛn kin yuz gred dɛn we dɛn dɔn pik afta dɛn dɔn tɛst di lɔw-tɛmpracha fleksibiliti, impak rɛsistɛns ɛn sil intɛgriti ɔnda aktual frɔzɛn kɔndishɔn.

Wetin mek PP pakej we dɛn dɔn sial kin lik?

Di kɔmɔn tin dɛn we kin mek i apin na di flɛnch dɛn we gɛt dɔti, fim pankchɔ, chanɛl lik, wrinkles, distɔrj trey dɛn , sɛtin we nɔ kɔrɛkt ɔ wan silan layt we nɔ kɔmpitabl.

Yu tink se dɛn kin print di fim bay dɛnsɛf?

HSQY kin saplae kɔstɔm-printed PP tre lidding film wit logo, prodak infɔmeshɔn, kuk instrɔkshɔn, barɔd, QR kɔd ɛn rɛjista mak. Saplae di artwok, ripit lɔng, winding dairekshɔn ɛn intended stɔrɔj ​​ɔ ɔt kɔndishɔn fɔ rivyu.

HSQY kin kɔstɔmayz di peel fɔs?

Pil fos kin ajɔst akɔdin to di PP tre sɔfa, siling sɛtin, it aplikeshɔn ɛn kɔshɔma-opin rikwaymɛnt.

Na BOPET /CPP film risaykul wit wan PP tre ?

BOPET εn CPP na difrεn polimכr famili dεm. Di kɔmbayn pakej nɔ fɔ ɔtomɛtik diskrayb as mono-PP ɔ risaykul insay PP strim.

Yu tink se mono-PP lidding opshɔn dɛn de?

PP-based designed-for-recycling structures kin bi evalyu fɔ fayn fayn prɔjek dɛm. Faynal avaylabl, barɛri pefɔmɛns ɛn risaykul klem nid tɛknikal kɔnfɔmeshɔn.

Wetin na di MOQ fɔ PP tre silin film?

HSQY in rεfrεns MOQ fכ PP tre siling film na aprכksimatli 500 kg fכ sεlekt EVOH/PP film dεm εn aprכksimatli 1,000 kg fכ sεlekt BOPET /CPP כ BOPP/EVOH strכkchכ dεm. Kɔnfɛm di minim kwantiti fɔ di strɔkchɔ we yu dɔn pik, tiknɛs, wit ɛn printin spɛsifikɛshɔn we yu de aks fɔ kot.

Wetin na di prodakshɔn lida tɛm fɔ PP tre silin film?

HSQY in rεfrεns prodakshכn lida tεm fכ PP tre siling film na aprכksimatli 10–15 wok de afta di film strכkchכ, dimεnshכn, printin εn כda ditel dεm dεn kכnfכm. Kɔnfɛm di prodakshɔn schedule ɛn di dɛstineshɔn-spɛsifi k transit tɛm na di kot.

A kin aks fɔ sampul ɔ trial rol?

HSQY kin tɔk bɔt sampul film ɔ trayal rol fɔ PP tre silin, pil, anti-fɔg, MAP ɛn pak-layn tɛst. Provayd di tre strɔkchɔ, sila mɔdel ɛn rikwayd rol dimɛnshɔn so di sampul spɛsifikɛshɔn kin rivyu.

Us tɛst dɛn fɔ dɔn bifo dɛn prodyuz bɔku bɔku wan?

Di tɛst dɛn we dɛn kin rɛkɔmɛnd inklud tre kɔmpatibiliti, sil trɛnk, pil fɔs, lik, anti-fɔg pefɔmɛns, barɛri tɛst, kol-chen tɛst, ɔt tɛst ɛn kɔmɛshɔnal shelf-layf validɛshɔn.

Us fud-kɔntakt dɔkyumɛnt dɛn a fɔ aks fɔ PP tre fim?

Rikwest dɔkyumɛnt fɔ di rayt fim strɔkchɔ ɛn di we aw dɛn want fɔ yuz am. Gi di dɛstineshɔn makɛt, di kayn it, kɔntakt tɛm, stɔrɔj ​​tɛmpracha ɛn ɛni ɔt prɔses so dat HSQY go kɔnfɔm di aplikebul diklareshɔn ɛn tɛst ripɔt fɔ di gred we yu dɔn pik.

Rikwest di ditel dɛn bɔt aw fɔ fala di lɔ

Us infɔmeshɔn HSQY nid fɔ PP tre fim kot?

Fɔ wan PP tre siling film kot, sɛn di tre flɛnch matirial, it aplikeshɔn, di opin stayl we yu want, film tik ɛn waid, rol ɛn kɔr dimɛnshɔn, sila mɔdel, print rikwaymɛnt, kwantiti ɛn dilivri dɛstineshɔn. Wan fizik tre sampul de ɛp fɔ kɔnfɔm di sial mach.

Rikwest fɔ kot

Tɔk bɔt wan patikyula tre ɔ fim rikwaymɛnt

Inklud yu tre matirial ɛn prodakshɔn kɔndishɔn so dat HSQY go ebul fɔ rivyu di aplikeshɔn wit yu.

Aks wan pɔsin we sabi bɔt fim dɛn

Rikwest wan PP tre silin film kot

Sheb yu tre ɛn layn ditil wit HSQY fɔ wan fim rɛkɔmɛndishɔn, trayal rol, kɔstɔm printin ɔ wan bɔlk kot. Wi kin tɔk bak bɔt kɔmpitabl PP trey dɛn , silin ikwipmɛnt ɛn intanashɔnal shiping.

Kontakt HSQY fɔ wan kot Rikwest fɔ tek wan ɛgzampul

Wetin fɔ sɛn

  • Tray Material na di flɛnch, drɔ ɔ sampul
  • Food Product, stɔrɔj ​​ɛn ɔt prɔses
  • Sil Opin stayl, anti-fog ɛn barɛri rikwaymɛnt dɛn
  • Line Sealer model, rol dimɛnshɔn ɛn winding
  • Ɔda Kwantiti, di tin dɛn we yu nid fɔ print ɛn di say we yu want fɔ go
Ful kot chɛklist

Fɔ gɛt kɔrɛkt fim rɛkɛmɔndeshɔn ɛn kot, duya gi bɔku pan dɛn tin ya as yu ebul:

  • PP tre manifakta ɛn prodak kɔd

  • Komplit tre matirial strɔkchɔ

  • Virgin ɔ risaykul-kɔntinɛnt PP infɔmeshɔn

  • Fizik tre sampul dɛn

  • Tray dimɛnshɔn ɛn flɛnch wit

  • Di kayn it ɛn di wet we dɛn pak

  • Fɔd filin tɛmpracha

  • Ambient, chilled ɔ frɔzɛn stɔrɔj

  • I izi fɔ pul, lɔk-sil, bɔrst-pil ɔ risisilabl rikwaymɛnt

  • Existing film sampul ɔ target peel fɔs

  • Anti-fog we dɛn nid

  • MAP ɔ ay-baria rikwaymɛnt

  • Target shelf layf

  • OTR ɛn WVTR we dɛn nid we dɛn de

  • Maykrowev, pasteurization ɔ ventin rikwaymɛnt

  • Rikwayd film tik

  • Film wit ɛn rol lɔng

  • Kor insay dayamita

  • Maksimal rol ausayd dayamita

  • Sialant sayd wund insay ɔ na do

  • Tray siling mashin manifakta ɛn mɔdel

  • Kɔrɛnt silin tɛmpracha, prɛshɔn ɛn tɛm fɔ de

  • Prodakshɔn spid

  • Fim we dɛn print ɔ we dɛn nɔ print

  • Artwok, kala kɔnt ɛn ripit lɔng

  • Fɔd-kɔntakt dɔkyumentri we dɛn nid

  • Ɔda kwantiti ɛn ɛni ia kɔnsɔmshɔn

  • Di kɔntri we yu want fɔ go, di pɔt ɔ adrɛs usay dɛn de sɛn di tin dɛn

STƆT WAN RFQ WE DƐN INFƆM

Lɛ Wi Fɛn di Rayt Plastik Sɔlv

Yu de luk fɔ plastic sheet matirial s, film, it pak, ɔ wan kɔstɔmayt sɔlvishɔn? Tɛl wi yu matirial, saiz, kwantiti, ɛn aplikeshɔn we yu nid. Wi tim go ɛp yu fɔ pik di rayt prɔdak ɛn gi yu kɔmpitishɔn kot.
√   Aplikeshɔn ɛn kɔnvɔshɔn prɔses
√ Tik, wit ɛn rol fɔmat
√ Kɔlɔ, klia ɛn sɔfa finish
√ Fɔnkshɔn, dɔkyumɛnt, kwantiti ɛn ples fɔ go
Rikwest Wi Bɛst Kɔt
Rikwest Wi Bɛst Kɔt

Wi matirial ɛkspɛkt dɛn go ɛp fɔ no di rayt sɔlvishɔn fɔ yu aplikeshɔn, put togɛda wan kot ɛn wan ditayl tɛmlayn.

HSQY-PLASTIK-GRUP-logo-wayt-transparent
Imel: chenxiangxm@hgqyplastic.com

Pakɛj Silin Film dɛn

Trey dɛn

Akrilik shit

Sɔpɔt

© KƆPIRAYT   2026 HSQY PLASTIC GROUP ƆL DI RAYT DƐN DE.