Lok-sil BOPP/EVOH/PE Lidding Film fɔ PP Trey dɛn

BOPP/EVOH/PE Liding film vidio

Wetin Na BOPP/EVOH/PE Lidin Film?

BOPP/EVOH/PE lidding film na wan multilayer high-barrier top web we dɛn kin yuz fɔ sial it trey fɔ modifyed-atmosphere pak, chilled it, mit, poultry, sifud, dairy, cheese, ɛn pripia it. Di BOPP ɔda wɛb de gi klia, stiffness, low density, moisture resistance, ɛn printability. EVOH de gi di prinsipal ɔksijɛn ɛn aroma barɛri. Di PE-based insay strɔkchɔ de gi tafnɛs ɛn ɔt silin to wan kɔmpitabl PE silin sɔfays.

Di standad prodak na dis pej de posishun as permanent lok-sil film . I min fɔ mek wan strɔng weld-layk klos pas fɔ mek kɔstɔma izi-pil opin. Anti-fog, kɔstɔm printin, ɛn aplikeshɔn-spɛsifi k barɛri lɛvɛl dɛn kin divɛlɔp sɛpret wan.

HSQY list tiknes frɔm 0.05mm to 0.09mm , rol wit frɔm 150mm to 900mm , klia ɔ print fɔmat, ɛn wan kɔrɛnt MOQ we na 1000kg . Faynal barɛri ɛn siling valyu dɛn fɔ kɔnfyus fɔ di aprɔv film strɔkchɔ, trey, it, MAP gas miksɔp, ɛn stɔrɔj ​​kɔndishɔn.

Impɔtant Kɔrɛkshɔn fɔ Tray-Kɔmpatibiliti

Di pej we de naw de ɔnda di PP-tray lidding kategori ɛn i gɛt taytul fɔ PP trey dɛn, bɔt di strɔkchɔ we de na di list dɔn wit wan PE siling layt. Wan standad PE silan nɔ de mek ɔtomɛtik wan rilibul lɔk sil to wan PP trey flɛnch we nɔ gɛt kɔt.

If di prodak na fɔ PP/EVOH/PP ɔ mono-PP trey, kɔnfɔm se di aktual insay silin na PP-kɔmpatibl, kwalifay yunivasal silin, ɔ se di trey flɛnch gɛt kɔmpitabl PE silin sɔfays. If nɔto dat, dɛn fɔ kɔrɛkt di strɔkchɔ ɛn di prɔdak nem to BOPP/EVOH/PP ɔ ɔda kɔrɛkt PP-silin kɔnstrɔkshɔn.

BOPP/EVOH/PE Liding film imej

Klia printabl ay-baria liding film

Wetin Mek Yuz EVOH insay Ay-Baria Liding Film?

• כksijεn barεri: EVOH de ridyus כksijεn transmishכn εn i de εp fכ protεkt כksidεshכn-sεnsitiv it dεm.

• di aroma ritεnshכn: di barεri layεr de εp fכ rεtεn di prodakt aroma εn ridyus di flawa tכnfכs.

• MAP gas ritɛnshɔn: Wan tre-ɛn-lid sistɛm we dɛn mek fayn fayn wan kin kip di CO2, N2, ɛn O2 atmosfɛs we dɛn dɔn pik.

• Transparent pak: EVOH alaw ay-baria pefɔmɛns witout yuz opaque aluminiɔm fɔyl.

• Tin fכnshכnal layεr: Wan rili tin EVOH layεr kin ad sכbstanshכl gas-baria fכnshכnaliti insay wan mכltilayεr strכkchכ.

• Kastom barεri lεvεl dεm: EVOH gred, tiknes, layεr posishכn, εn polimכr dεm we de rawnd dεn kin ajɔst to di tכgεt OTR.

• Fɔ ridyus di it-west: Di barɛri pak we dɛn dɔn validet kɔrɛkt wan kin sɔpɔt di kwaliti fɔ di prɔdak ɛn di shelf layf we dɛn want.

• Aw fɔ yuz am bɔku say: Dɛn kin mek fayn fayn tin dɛn fɔ mit, bɔd, sifud, chiz, dairy, rɛdi it, ɛn ɔda it dɛn we gɛt ɔksijɛn.

Tipik BOPP/EVOH/PE Layer Struktrɔ

Di ekzak layt dizayn fɔ kɔnfyus insay di tɛknikal data shit. Wan kɔmɔn kɔnsɛptwal strɔkchɔ kin gɛt wan print BOPP ɔta ​​wɛb we dɛn lamin to wan kɔɛkstrud PE/tay/EVOH/tay/PE silan wɛb.

BOPP/EVOH/PE Lidding Film Spɛsifikeshɔn dɛn

Di tebul we de kam biɛn ya de kip di kɔrɛnt kɔmɛshɔnal infɔmeshɔn we dɛn de ad di tɛknikal paramita dɛn we dɛn nid fɔ pak di ay-baria MAP. Dɛn fɔ rayt di garanti fɔ pefɔmɛns na di tɛknikal data shit we dɛn dɔn gri fɔ ɛn di ɔda we aw dɛn bay am.

Ɔksijɛn Barɛri ɛn Mɔstɔ Barɛri Difrɛn

EVOH na di fכs tin we dεn kin pik fכ gas εn aroma barεri. Di pej nɔ fɔ tɔk se EVOH nɔmɔ de gi ɔl tu di ay ɔksijɛn ɛn ay mɔstɔ barɛri ɔtomɛtik wan. Mɔstɔ protɛkshɔn na di kɔmplit maltilayer dizayn de gi am ɛn dɛn fɔ sho am yuz WVTR data.

Wetin Mek OTR Valyu dɛn Nid Tɛst Kɔndishɔn

Wan OTR nɔmba gɛt minin nɔmɔ we dɛn tɔk bɔt di we aw dɛn de tɛst, di tɛmpracha, di rilitiv humiditi, di tik we di fim tik, di sampul kɔndishɔn, ɛn di kɔmplit laminat. Di kɔmpiashɔn fɔ di saplay dɛn we dɛn bays pan wan OTR valyu we nɔ gɛt kɔndishɔn kin mek pipul dɛn nɔ no di tru.

• Stet di komplit film strɔkchɔ ɛn totɛl tiknɛs.

• Stet di EVOH gred ɛn aprɔksimat barɛri-layer tik usay i apɔynt fɔ kɔmɛshɔnal.

• Gi tɛmpracha ɛn rilitiv humidity.

• Identify di test standad ɛn di ikwipmɛnt we.

• Klarify if di rizulyt na fɔ di fim nɔmɔ ɔ di kɔmplit paket we dɛn sial.

• Ri-tɛst afta yu dɔn fleks, print, lamin, stɔrɔj, ɛn distribyushɔn usay barɛri damej pɔsibul.

• Yuz ɔl-pak rɛsɛdyuɛl-ɔksijɛn ɛn gas-ritɛnshɔn tɛst fɔ MAP shelf-layf validɛshɔn.

Tray Matirial Kɔmpatibiliti

Lok Seal vs. Izi Peel

Dis pej fɔ pe atɛnshɔn pan pɔrmanent lɔk-sil sɔch intenshɔn. Dɛn fɔ gi EVOH fim we izi fɔ pul as sɛpret gred ɔ sɛpret prodak pej so dat di wan dɛn we de fɛn tin ɛn di wan dɛn we de bay go ebul fɔ difrɛns di we aw dɛn de biev we dɛn de opin.

BOPP Ɔda Wɛb vs. BOPET Ɔta Wɛb

MAP Pakɛj Rikwaymɛnt dɛn

Di fim we gɛt ay barɛri nɔmɔ nɔ de gi garanti fɔ di shelf layf we dɛn want. Di kɔmplit MAP sistem inklud di it, trey, liding film, gas miksɔp, edspɛs, siling prɔses, stɔrɔj ​​tɛmpracha, paket lik, prodak respirashɔn, ɛn distribyushɔn kɔndishɔn.

Anti-Fɔg ɛn Prodak Visibiliti

Opshɔnal anti-fɔg funkshɔnaliti de ɛp fɔ mek pɔsin ebul fɔ si bay we i de ɛnkɔrej kɔndens mɔstɔ fɔ spre insay wan tin transparent layt pas fɔ mek difrɛn drɔp dɛn. I nɔ de pul wata we de kɔmɔt ɔ kɔndɛns.

• Identify di anti-fog sayd ɛn di sil sayd.

• Difayn di it tɛmpracha we dɛn de pak ɛn kol.

• Spɛsifik chilled-storage tempɔret ɛn humidity.

• Difayn vijual akseptans yuz wan raytin we ɔ foto dɛn we dɛn dɔn gri fɔ.

• Test anti-fog truutout di intended shelf layf.

• Kɔnfɛm di kɔtin fɔ lɔng tɛm afta yu dɔn waynd, print, lamin, ɛn trey sial.

Sil Windo ɛn Prodakshɔn-Layn Validɛshɔn

Wan fim we dɛn kin abop pan fɔ lɔk-sil nid fɔ gɛt wan big kɔmɛshɔnal winda we dɛn kin yuz fɔ sidɔm. Tεmpratura, prεshכn, di tεm we yu de de, di layn spid, di tεmprachכ na di trey, di flenj kכntaminεshכn, di tul flat, εn di film tεnshכn כl de afekt di pakej integriti.

• Minimum sil-initiashɔn tɛmpracha

• Maksimal tempɔret bifo film ɔ trey distɔrshɔn

• Prɛshɔn we dɛn nid ɛn di tɛm we dɛn fɔ de de

• Komershal trey-sila spid

• Weld trɛnk afta yu dɔn kol ɛn kip am

• Pɔfɔmɛnshɔn wit ɔyl, wata, sos, paoda, mit purj, ɛn it patikyula

• Kɔnsistɛns akɔdin to ɛvri tul kaviti, kɔna, ɛn kɔmpawtmɛnt

• Wɛb trak, kɔt, ay-mak rɛjista, ɛn rol-chenj bihayvya

Sil Integriti ɛn Barɛri Fɛil Analysis

Kastom Printin ɛn Rol Ɔriɛnteshɔn

Kastom printin kin inklud logo, prodakt nem, ingridiɛnt, MAP stetmɛnt, stɔrɔj ​​instrɔkshɔn, barɔd, QR kɔd, de-kɔd eria, traceability, ɛn transparent viewing windows.

• Print sayd: Kɔnfɛm sɔfa ɔ rivas printin na di BOPP wɛb.

• Sil sayd: Identify di PE ɔ aplikeshɔn-spɛsifi k inana silan.

• Anti-fog sayd: Identify di fud-fes funkshonal surface we anti-fog inklud.

• Winding direction: Apruv wan mashin-spɛsifi k winding dayagram.

• Print ripit: Mach di tre-sila kɔt ɛn tul layout.

• Ay mak: Kɔnfɛm di sayz, kɔlɔ, pozishɔn, ɛn distans frɔm di edj fɔ di fim.

• Baria protɛkshɔn: Nɔ pwɛl di ay-baria wɛb we yu de print, slit, handel, ɔ chenj.

Kwaliti-Kɔntrol Rikwaymɛnt dɛn

• OTR: Difayn tɛst tɛmpracha, rilitiv humiditi, di we aw dɛn de du am, ɛn maksimal valyu.

• WVTR: Difayn tɛst kɔndishɔn ɛn maksimal valyu sɛpret frɔm OTR.

• Sil trɛnk: Test di aktual trey ɛn difayn di lɔk-sil valyu we yu nid.

• Lamination bond: Verifay di bond trɛnk bifo ɛn afta kondishɔn.

• Fleks-krak resistans: Evaluate barɛri ritɛnshɔn afta handlin ɛn distribyushɔn simulshɔn.

• Pankchɔ resistans: Impɔtant fɔ mit, sifud, shap ed, ɛn stak.

• Haz ɛn glos: Kɔntrol di prɔdak visibiliti ɛn rital apinans.

• Tiknes profayl: I de afɛkt di barɛri, stiffness, rol bild, ɛn siling.

• Coefficient of friction: I de kɔntrol di unwinding ɛn mashin transpɔt.

• Rol kwaliti: Chɛk di ed alaynɛshɔn, wrinkles, tɛliskɔp, splays, kɔr, ɛn waynd dairekshɔn.

Tipik Aplikeshɔn dɛn

• Mit, bɔd, ɛn sifud trey dɛn we dɛn dɔn chenj di atmosfɛs

• Chiz, dairy, prosɛs mit, ɛn deli prodakt

• Chilled rɛdi it ɛn kɔvinant it dɛn

• Fresh pasta, vɛjitebul dɛn we dɛn dɔn pripia, ɛn sos

• Tray dɛn we gɛt ay barɛri we nid fɔ mek dɛn lɔk am fɔ ɔltɛm

• PET/EVOH/PE ɔ PE-sial trey dɛn we de yuz kɔmpitabl PE silin sɔfays

• PP-based MAP sistem we de yuz wan separet konfam PP-kompatibl silan

• Prayvet-lɛbul prodakt dɛn we nid transparent print lidding film

• Anti-fog chilled packs we nid klia rital displei

Eksplore HSQY's EVOH/PP ay-baria film kategori, PP trey sial films , ɛn komplit lidding film rεnj.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

1. Trey matirial, silin-sɔfa layt, spɔlayt, prodak kɔd, drɔin, ɔ fizik sampul

2. Trey dimɛnshɔn, flɛnch wit, kɔmpatmɛnt, fil wet, ɛn edspɛs volyum

3. di kayn it, di fεt, mכsishכn, asid, shap ed dεm, tεmprachכ fכ fulכp, εn shelf-layf tכgεt

4. Rikwayd pɔrmanent lɔk sil, had pil, ɔ izi-pil bihayvya

5. Target OTR ɛn WVTR wit tɛst tɛmpracha, rilitiv humiditi, we, ɛn yunit dɛn

6. MAP gas miks, akseptabl rεsidyual כksijεn, εn gas-rεtεnshכn rikwaymεnt

7. Anti-fog, printin, perforation, friza, pasteurization, ɔ ɔda tin dɛn we yu nid fɔ du

8. Tray-siling mashin brand, mɔdel, tul layout, kɔmɛshɔnal spid, prɛshɔn, tɛmpracha, ɛn tɛm fɔ de

9. Film tiknes, wit, rol lɔng, kɔr ID, maksimal ɔta dayamita, rol wet, ɛn waynd dairekshɔn

10. Print sayd, sil sayd, anti-fɔg sayd, ay-mak pozishɔn, ɛn print ripit

11. Rikwayd fɔ it-kɔntakt, maykreshɔn, kwaliti, barɛri, risaykul, ɛn dɛstineshɔn-maket dɔkyumentri

12. Sampul kwantiti, anual volyum, dilivri dɛstineshɔn, ɛn di de we dɛn aks fɔ lanch

Rikwest High-Barrier Film Samples ɛn Prayz

Kastamayzeshɔn Savis dɛn

• Kastom 0.05–0.09mm tik ɛn tolɛreshɔn

• Kastom 150–900mm rol wit

• Kastom rol lɔng, kɔr ID, maksimal ɔta dayamita, rol wet, ɛn wayndin dairekshɔn

• PE-, PP-, PET-, PS-, foyl-, ɔ yunivasal-silant strɔkchɔ dɛn bay prɔjek

• Pɛrmanɛnt lɔk-sil, had-pil, izi-pil, ɛn aplikeshɔn-spɛsifi k silin gred dɛn

• Kastom EVOH gred, barɛri-layer tiknɛs, OTR, WVTR, ɛn MAP pefɔmɛns

• Anti-fɔg, anti-statik, UV-skrin, pankchɔ, fleks-krak, friza, ɛn pastɔrayzeshɔn opshɔn dɛn

• Fleksografik ɔ gravu printin fɔ branding, instrɔkshɔn, ɛn traceability

• Kastom ay mak, print ripit, transparent winda, kɔdin eria, perforeshɔn, ɛn venting

• Trey kompitibiliti, sil-windo, barɛri, lik, gas-ritɛnshɔn, ɛn prodakshɔn-layn trayal

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi di tɛknikal, kwaliti-mɛnejmɛnt, inspekshɔn, ɛn matirial dɔkyumentri we de fɔ di gred we dɛn dɔn gri fɔ. Di wan dɛn we de bay fɔ aks fɔ di kɔmplit layt strɔkchɔ, tɛnki data shit, sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn, maykreshɔn ɔ kɔmplians ripɔt, OTR ɛn WVTR ripɔt, sil-strɛng we, ɛn rol inspekshɔn krayteria.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim sɛtifikeshɔn ɛn dɛn nɔ fɔ prɛzɛnt am as prodak-spɛsifi k pruf fɔ fud-kɔntakt sef ɔ barɛri pefɔmɛns. SGS ɔ ɔda ripɔt klem fɔ no di rayt fim strɔkchɔ, ripɔt nɔmba, tɛst kɔndishɔn, di kayn it, ɛn di kɔndishɔn we dɛn want fɔ yuz.

Tin dɛn fɔ Tink bɔt fɔ Risaykul

BOPP/EVOH/PE na wan mכltilayεr strכkchכ we gεt mכr dan wan polimכr famili εn i nכ fכ dεskrεb am כtomatכk se i kin risaykul na εvri mכket. Risaykul dipen pan layt prɔpɔshɔn, tay layt, adeziv, ink, kɔtin, tre matirial, it rɛsɛdyu, kɔlɛkshɔn lɔ, ɛn lokal infrastukchɔ.

Usay dizayn fɔ risaykul na prɔyoritɛt, kɔmpia di strɔkchɔ we de naw wit wan kwalifay PP-dominant ɔ PE-dominant ay-baria sistɛm ɛn chɛk am agens di dɛstineshɔn makit in kɔrɛnt risaykul krayteria. Wan risaykul PP-bɛs lidding strɔkchɔ nɔto teknik wan idɛntik to wan kɔvɛnshɔnal BOPP/EVOH/PE laminat.

Globɛl Ɛgzibishin dɛn

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt BOPP/EVOH/PE Film

Wetin na BOPP/EVOH/PE liding film?

Na wan multilayer lidding film we de kɔba wan printabl BOPP ɔta ​​wɛb, wan EVOH ɔksijɛn-baria layt, ɛn wan PE-based siling strɔkchɔ.

Wetin EVOH de du na di fim?

EVOH de gi di prinsipal ɔksijɛn, gas, ɛn aroma barɛri. I pefɔmɛns fɔ spɛsifa yuz OTR ɔnda stet tɛst kɔndishɔn dɛn.

Yu tink se EVOH de gi di mɔstɔ barɛri bak?

Di komplit multilayer strɔkchɔ de gi mɔstɔ protɛkshɔn. Dɛn fɔ mɛzhɔ WVTR sɛpret bikɔs ɔksijɛn barɛri ɛn wata-vaypa barɛri na difrɛn prɔpati.

Wetin na lɔk sil?

Lɔk sil na strɔng pɔrmanent ɔ weld-layk klos we dɛn mek fɔ pakej sikyɔriti pas fɔ izi kɔshɔma fɔ pul am.

PE sialant kin sial dairekt to PP trey?

Nɔto ɔtomɛtik wan. Plɛn PP kin nid PP-kɔmpatibl silin, kwalifay yunivasal layt, ɔ trey flɛnch we gɛt kɔmpitabl kɔtin.

Yu kin yuz dis fim wit PP/EVOH/PP trey?

Na afta di aktual siling layt dɔn kɔnfyus as PP-kɔmpatibl ɔ di trey de gi ɔda kɔmpatibl sɔfays. Wan fizik trey tɛst nid fɔ de.

Di fim kin sial PET ɔ CPET trey dɛn?

Plɛn PET ɛn CPET sɔfays dɛn nɔmal fɔ nid PET-kɔmpatibl silin kemistri. Di standad PE silan nɔ fɔ tek am se i de wok.

Us OTR a fɔ spɛsifa?

Di OTR we dɛn nid dipen pan di it, trey barɛri, gas miksɔp, stɔrɔj ​​tɛmpracha, humidity, target shelf layf, ɛn akseptabl rɛsɛdyual ɔksijɛn.

Wetin mek OTR fɔ inklud tɛmpracha ɛn humiditi?

Baria test rizulεt dipכnt pan di tεst kכndishכn dεm εn komplit film strכkchכ. Valyu dɛn we nɔ gɛt tɛmpracha, humiditi, we, ɛn yunit dɛn nɔ kɔmparabl dairekt wan.

Yu tink se anti-fog de?

Yɛs. Dɛn kin ad anti-fɔg fɔ it dɛn we dɛn dɔn kol usay kɔndenseshɔn kin ridyus di prɔdak visibiliti.

Yu tink se BOPP/EVOH/PE film kin bi kɔstɔm print?

Yɛs. Fɔ print kin gɛt logo, tin dɛn we dɛn kin yuz fɔ mek di it, MAP stetmɛnt, barɔd, QR kɔd, deti-kɔd eria, ɛn transparent winda dɛn.

Us saiz dɛn de?

Di pej we de naw de list 0.05–0.09mm tik ɛn kɔstɔm wit frɔm 150mm to 900mm.

Dis fim fit fɔ pak MAP?

Yes, afta di trey barɛri, film OTR, WVTR, gas miksɔp, rɛsɛdyual ɔksijɛn, sil intɛgriti, ɛn shelf-layf kɔndishɔn dɛn dɔn validet.

Yu tink se BOPP/EVOH/PE film kin risaykul?

I nɔ fɔ ɔtomɛtik fɔ diskrayb am se i kin risaykul ɔlsay bikɔs na mɔltilayer, mɔlti-pɔlima strɔkchɔ. Evaluate di komplit pakej ɛn lokal risaykul krayteria.

A kin aks fɔ sampul bifo bɔku bɔku prodakshɔn?

Yes, i go bi se na di spesifikeshɔn ɛn di matirial we de. Gi di trey, it, MAP target, mashin ditel, film dimɛnshɔn, ɛn di sil bihayvya we dɛn nid.

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae BOPP/EVOH/PE ay-baria liding film, EVOH/PP film, PET/EVOH/PE film, MAP tre, PP/EVOH/PP tre, PET/EVOH/PE tre, anti-fog film, izi-pil ɛn lɔk-sil film, ɛn rilat it-pak prodak fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt fim-strakchɔ sɛlɛkshɔn, trey kɔmpatibiliti, OTR ɛn WVTR target, MAP dizayn, sil divɛlɔpmɛnt, anti-fɔg, printin, rol kɔnvɔshɔn, sɛmpul, prodakshɔn-layn trayal, kwaliti dɔkyumentri, ɛkspɔt pak, ɛn intanashɔnal delivri.

Kontakt HSQY fɔ High-Barrier Lidding Film