Wetin Na BO PET/PE Sial Film?
BO PET/PE siling film , we dεn kכl bak BO PET/PE lidding film, polyester/PE tre film כ laminated top-seal film, na fleksibul pak mεtirial we de kכmbayn wan biaxially oriented PET כta layt wit wan PE-bεys fud-kכntakt siling layεr.
Di BOPET layt de gi transparency, glos, tensil strɛngth, stiffness, dimɛnshɔnal stebiliti ɛn wan printabl sɔfays. Di modifyed PE layεr de gi hεt-silin pεrformεns εgεst wan kכmpatibl PE, modifyed-polyolefin כ PE-kכt tre fεnj.
HSQY de saplae ɔl tu di izi-pil BO PET/PE liding film ɛn lɔk-sil BO PET/PE lidding film fɔ kɔmpitabl PET/PE trey dɛn , PET/EVOH/PE trey dɛn ɛn ɔda it kɔntena dɛn wit wan fayn PE silin sɔfays.
Di film strɔkchɔ, siling bihayvya, barɛri lɛvɛl, rol dimɛnshɔn ɛn fɛnshɔnal tritmɛnt dɛn fɔ pik akɔdin to di aktual tre , pak it, silin mashin ɛn stɔrɔj kɔndishɔn.
Wetin Na di Difrɛns Bitwin BO PET/PE ɛn PET/PE Film?
PET/PE na wan jenɛral matirial diskripshɔn fɔ wan film we gɛt wan polyɛsta layt ɛn wan polyɛtilin silin layt.
BO PET/PE na wan mכr spεsifi k PET/PE strכkchכ we di PET כta film dεn bin biaxially oriented di tεm we dεn de prodyuz.
Biaxial orienteshɔn de impruv tɛnsiɛl trɛnk, stiffnɛs, dimɛnshɔnal stebiliti, optik apinans ɛn prɔsesin pefɔmɛns. Fɔ dis rizin, dɛn kin pik BOPET as di ɔda layt fɔ print tre -lidding laminates.
| Kɔmpiashɔn |
PET/PE Film |
BO PET/PE Film |
| PET Layya we de na di wɔl |
Jɛnɛral PET ɔta ɔ strɔkchɔral layt |
Biakshal ɔriɛnted PET ɔda layt |
| Mekanikal Pɔfɔmɛnshɔn |
Dipen pan di PET gred we yu dɔn pik ɛn di prodakshɔn prɔses |
Higher tensile strength, stiffness ɛn dimɛnshɔnal stebiliti |
| Fɔ print |
Available akɔdin to di tritmɛnt we dɛn dɔn gi di sɔfayz |
Dɛn kin pik am fɔ mek dɛn print am fayn fayn wan na di say we dɛn de ɔ fɔ mek dɛn print am bak |
| Di Tipik Yuz |
Jɛnɛral laminated pak ɛn tre silin |
Print izi-pil ɛn lɔk-sil tre -lid film |
Aw Dɛn Strukchɔ BO PET/PE Pakɛj Silin Film ?
| Film Komponent |
Men Fɔnkshɔn |
Baya Kɔnsidɛreshɔn |
| BOPET Ɔta Laya |
Gi klia, stiffness, trɛnk, dimɛnshɔnal stebiliti ɛn printabiliti |
Konfam tik, haz, glos, shrinkage en surface tritment |
| Lay we de print |
I de kɛr branding, infɔmeshɔn, barɔd, QR kɔd ɛn rɛjista mak |
Kɔnfɛm printin sayd, kɔlɔ, ripit lɔng ɛn ay-mak pozishɔn |
| Lamineshɔn Adhesive fɔ di tin dɛn we dɛn de yuz |
Bɔnd BOPET to PE ɛn opshɔnal fɛnshɔnal layers |
Kɔnfɛm di tɛm fɔ mɛn, di trɛnk we di bon gɛt, di ɔda tin dɛn we de smɛl ɛn di kɔndishɔn dɛn we pɔsin kin gɛt wit it |
| Opshɔnal EVOH Barɛri Layer |
Ridyus ɔksijɛn ɛn MAP gas transmishɔn |
Spɛsifik di target OTR, WVTR, gas miksɔp ɛn shelf-layf kɔndishɔn dɛn |
| Modified PE Silant Layer we dɛn dɔn chenj |
Krio wan izi-pil ɔ lɔk sil agens wan kɔmpitabl PE sɔfays |
Match di PE fɔmyulashɔn to di tre flɛnch ɛn di sil trɛnk we dɛn nid |
| Opshɔnal Anti-Fɔg Tritmɛnt |
Ridyus di kɔndenseshɔn drɔp dɛn we pɔsin kin si |
Kɔnfɛm anti-fɔg sayd, stɔrɔj tɛmpracha ɛn di tɛm we dɛn nid |
BO PET/PE Sial Film Spɛsifikeshɔn dɛn
Di tebul we de kam biɛn ya de sɔmariz di kɔrɛnt HSQY izi-pil ɛn lɔk-sil BO PET/PE lidding-film rɛnj. Faynal garanti valyu dɛn fɔ de na di apruv tɛknikal data sheet matirial ɛn bay spɛsifikɛshɔn.
| Tayp fɔ Prodakt |
BO PET/PE Film we de lid trey |
| Matirial Strukchɔ |
BOPET laminated wit wan modifyed PE siling layt |
| Di Opshɔn dɛn fɔ Sil |
I izi fɔ pul, had pil, lɔk sil ɔ weld sil |
| Rifrɛns Tiknɛs |
aprכksimatli 0.052–0.09 mm, we ikwal to 52–90 μm |
| Rol Width Rɛnj we yu de yuz |
Na lɛk 150–900 mm |
| Width dɛn we dɛn dɔn pik |
180 mm, 320 mm, 400 mm, 640 mm ɛn kɔstɔm wit dɛn |
| Rifrɛns Rol Lɛngth |
Na lɛk 500 m, wit kɔstɔm lɔng dɛn we de |
| Kor Dayamita |
Customized akɔdin to di tre siling mashin |
| Aw a luk |
Klia, glos, mat ɔ kɔstɔm print |
| Praymari Aplikeshɔn fɔ Trey |
PET/PE trey dɛn , PET/EVOH/PE trey dɛn , PE trey dɛn ɛn PE-kɔt silin sɔfays dɛn |
| Anti-Fɔg we dɛn kɔl |
Opshɔnal ɛn aplikeshɔn-spɛsifi k |
| Standart Barɛri |
Jɛnɛral mɔstɔ, aroma ɛn prodakt protɛkshɔn |
| Opshɔn we gɛt ay-baria |
EVOH ɔ ɔda fɛnshɔnal barɛri strɔkchɔ we de bay prɔjek |
| Yuz Maykrowev ɔ Ɔvin |
Aplikeshɔn-spɛsifi k tɛmal gred nɔmɔ |
| Yuz Friza |
Aplikeshɔn-spɛsifi k lɔw-tɛmpracha gred nɔmɔ |
| Fɔ print |
Fleksografik ɔ gravu printin we de bay prɔjek |
| Ikwipmɛnt dɛn we Kɔmpatibl |
Manual, semi-ɔtomɛtik ɛn ful ɔtomɛtik tre silin mashin dɛn |
| Rifrɛns MOQ |
Na lɛk 1,000 kg pan wan spɛsifikɛshɔn |
| Rifrɛns Lid Taym |
lεk 10–15 dez fכ sεlekt standad prodak dεm; kɔnfɔm spɛshal ɛn print gred dɛn |
Izi-Pil BO PET/PE Pakɛj Silin Film
Easy-peel BO PET/PE film na fɔ gi pakej intagriti we dɛn de ful-ɔp, stɔrɔj ɛn transpɔt we i de alaw di kɔshɔma fɔ pul di lid wit kɔntrol fɔs.
Di modifyed PE sialant de kɔntrol di we aw di film de separet frɔm di kɔmpitabl tre flɛnch.
Wan fim we dɛn dɔn pik fayn fayn wan we izi fɔ pul fɔ gi:
Kontroled peel-initiashɔn fɔs
Stebul peel-prɔpageshɔn fɔs
Wan-pies lid we dɛn kin pul
Ridyus di film shredding ɔ tearing
Limitɛd sialant rɛsɛdyu
Sufayf distribyushɔn ɛn lik rɛsistɛns
Kɔnsistɛns opin afta dɛn dɔn kip am kol
Rivyu HSQY in dɛn easy-peel BO PET/PE tre lidding film fɔ kɔshɔma-frenli opin aplikeshɔn dɛn.
Lɔk-Sil BO PET/PE Pakɛj Silin Film
Lɔk-sil BO PET/PE film, we dɛn kin kɔl bak weld-sil ɔ pɔrmanent-sil film, de prodyuz wan strɔng ɛn sɔbstanshal nɔ-izi-pil kloz.
Dɛn kin pik am we likwid kɔntɛnshɔn, tamper ɛvidɛns, gas ritɛnshɔn ɛn transpɔt sikyɔriti impɔtant pas kɔshɔma peelabiliti.
Lɔk-sil paket dɛn kin nid fɔ kɔt, pank ɔ te bifo yu yuz dɛn. Di fim nɔ fɔ prɔmot as izi pil pas dɛn gi difrɛn silin fɔmyulashɔn ɛn validet.
Rivyu HSQY in dɛn lok-sil BO PET/PE lidding film fɔ sikyuɔr it- tre klos.
Easy Peel vs. Lok Sil
| Kɔmpia |
Izi Pil |
Lɔk Sil |
| Di We aw Dɛn De Opin |
Kontrol manual peeling |
I kin nid fɔ kɔt, pank ɔ te |
| Kɔnvɛnshɔn fɔ Kɔnsuma |
I pas am pas dat |
Ridyus |
| Pakɛj Sikyuriti |
Balans wit opin kɔnvinɛns |
Strɔng resistans to aksidɛntal opin |
| Tipik Aplikeshɔn dɛn |
Salad, dɛzat, dairy fud ɛn kɔshɔma-rɛdi it |
Fɔd we gɛt likwid, fudsavis pak ɛn transpɔt-sɛnsitiv prɔdak |
| Men Risk |
Wan wik peel formulation kin ridyus distribyushɔn sikyɔriti |
If di sil trɛnk pasmak, i kin te di fim ɔ i kin pwɛl di tre |
Us Trey dɛn kin BO PET/PE Film Sil?
BO PET/PE de diskraib di film strɔkchɔ, bɔt tre kɔmpatibiliti de ditarmin mɔ bay di modifyed PE silin layt ɛn di matirial we de na di tre flɛnch.
| Tray Material |
Kompatibiliti Gaydɛns |
Fim we dɛn dɔn rɛkɔmɛnd |
| PET/PE Trey we yu de yuz |
Praymari aplikeshɔn we di flɛnch prɛzɛnt wan kɔmpitabl PE silin sɔfays |
I izi fɔ pul ɔ lɔk-sil BO PET/PE |
| PET/EVOH/PE Trey we yu de yuz |
Bɔku tɛm i kin kɔmpitabl we di ɔdasay silin layt de kɔntinyu fɔ bi PE |
Standart ɔ EVOH ay-barɛri BO PET/PE |
| PE ɔ PE-Kɔt Trey |
I kin kɔmpitabl we di tre ɛn film PE gred dɛn de gi di intarakshɔn we dɛn nid |
Aplikeshɔn-spɛsifi k BO PET/PE silan gred |
| Plɛn APET ɔ r PET fud tre |
Standart PE silan kin nɔ bon dairekt to wan plein PET sɔfays |
Dairekt-to- PET kot film ɔ PET -kɔmpatibl silin |
| CPET Fɔd Trey fɔ it |
Standard BO PET/PE nɔ fɔ ɔtomɛtik trit am as ovenable ɔ CPET -kɔmpatibl |
Dediket CPET silin ɛn tɛmal gred |
| PP ɔ PP/EVOH/PP Trey |
Wan PP flɛnch nɔmal wan nid fɔ gɛt PP-kɔmpatibl silin layt |
BOPET /CPP ɔ EVOH/PP fim |
| PS , PVC ɔ Aluminiɔm Trey |
Rikways sabstret-spɛsifi k silin kemistri |
Dediket kot ɔ yunivasal-sil fim |
| Tray we gɛt pepabɔd we dɛn kɔt |
Kompatibiliti dipen pan di polima kɔtin na di pepabɔd flɛnch |
Film bin mach to di rayt pepabɔd kɔtin |
Fizik tre sɛmpul ɔ wan kɔmplit tre -layer spɛsifikɛshɔn fɔ gi bifo dɛn kɔnfɔm wan kɔmɛshɔnal fim ɔda.
Fɔ PET/PE tre aplikeshɔn dɛn, rivyu HSQY dɛn silin film fɔ PET/PE trey dɛn .
Fɔ PP trey dɛn , rivyu di BOPET /CPP silin-film rεnj .
Ki Benefit dɛm fɔ BO PET/PE Pakɛj Silin Film
High clarity: Transparent BOPET de sɔpɔt klia prodak prɛzɛntɛnshɔn.
Glossy appearance: Di BOPET ɔta sɔfa de gi prɛmiɔm rital finish.
Mɛkanikal trɛnk: BOPET de gi tɛnsiɛl trɛnk, stiffnɛs ɛn dimɛnshɔnal stebiliti.
Riliable heat siling: Modified PE de gi izi-pil ɔ lɔk-sil pefɔmɛns pan kɔmpitabl sɔfays.
Moisture resistance: PE de ɛp fɔ ridyus wata-vapour transmishɔn ɛn sɔpɔt likwid kɔntinɛnt.
Kastom printin: Yu kin ad logo, grafik, instrɔkshɔn, barɔd ɛn ay mak.
Opshɔnal anti-fɔg: Dɛn kin mek di chill-fud visibiliti bɛtɛ wit wan aplikeshɔn-spɛsifi k tritmɛnt.
Opshɔnal ay barɛri: Dɛn kin ad EVOH we dɛn nid fɔ gɛt difayn ɔksijɛn barɛri.
Prodakshɔn-layn kɔmpatibiliti: Rol dimɛnshɔn ɛn wɛb prɔpati dɛn kin mach to di tre sila.
Aplikeshɔn dɛn fɔ BO PET/PE Silin Film
Chilled Ready Meals we dɛn dɔn mek fɔ it
BO PET/PE film dεm kin yuz fכ kol pasta, rays dish, kuk mit, vεgεtebul, sos εn pripia it dεm we pak insay kompitibul PET/PE trey dɛn .
Fresh Mit ɛn Pɔltri
Aplikeshɔn-spɛsifi k izi-pil, lɔk-sil, anti-fɔg ɛn ay-baria strɔkchɔ dɛn kin divɛlɔp fɔ bif, bɔd, chukchuk, tik ɛn prosɛs mit.
Fish ɛn Sifud
Fish filɛt, shrimps, shelfish ɛn sifud we dɛn dɔn pripia kin nid fɔ mek dɛn nɔ gɛt mɔstɔ, fɔ trit dɛn anti-fɔg, fɔ mek dɛn nɔ gɛt pankchɔ ɛn fɔ mek dɛn gɛt EVOH barɛri layt.
Salad, Frut ɛn Vɛjitebul
Yu kin yuz fim dɛn we izi fɔ pul ɛn we nɔ de mek fɔg fɔ mek salad we dɛn dɔn pripia, frut we dɛn kɔt, vɛjitebul ɛn tin dɛn we dɛn dɔn kol.
di prodyuz we de blo kin nid maykroperforeshכn כ kכntrold gas transmishכn pas fכ wan hεmεtik pakej we gεt hכy barεri.
Dairy Prodakt ɛn Desɛt dɛn
di aplikεshכn dεm inklud chiz pat dεm, dairy dεsεt, puding, mכs εn כda frij prodak dεm we dεn pak insay kompitibul trey dɛn .
Bekeri ɛn Kɔnfɛkshɔn
Dɛn kin yuz klia ɔ print fim fɔ kek, paste, kɔnfɛkshɔn ɛn bekɛri trey dɛn usay dɛn nid fɔ si di prɔdak ɛn fɔ protɛkt di mɔstɔ.
Foodservice ɛn Sɛntral Kichin dɛn
Dɛn kin evalyu lɔk-sil film fɔ sos, it we dɛn dɔn pripia ɛn fudsavis pak dɛn we nid fɔ gɛt strɔng likwid kɔntinɛnt ɛn distribyushɔn sikyɔriti.
Standart BO PET/PE vs. Ay-Baria PET/EVOH/PE Film
Standard BO PET/PE film de gi yusful mɛkanikal protɛkshɔn, mɔstɔ rɛsistɛns ɛn silabiliti. I nɔ fɔ ɔtomɛtik wan we dɛn kɔl fim we gɛt bɔku ɔksijɛn.
| Kɔmpiashɔn |
Stɛndad BO PET/PE |
PET/EVOH/PE Ay Barɛri |
| Men Protɛkshɔn |
Mekanikal trɛnk, mɔstɔ rɛsistɛns ɛn ɔt silin |
Ad wan difayn ɔksijɛn ɛn MAP gas barɛri |
| MAP Di we aw pɔsin kin fit |
Nɔto ɔtomɛtik fit fɔ ɔksijɛn-sɛnsitiv MAP |
Disain fɔ validet ay-baria MAP sistem dɛn |
| Data we dɛn nid |
Sil trɛnk ɛn jenɛral prodak-protɛkshɔn rikwaymɛnt dɛn |
Target OTR, WVTR, gas miks, tre barεri εn shelf layf |
| Tipik Aplikeshɔn dɛn |
Jɛnɛral chilled it, bakery, salad ɛn foodservice pak |
Mit, bɔd, sifud, chiz ɛn it dɛn we gɛt ɔksijɛn |
Fɔ MAP aplikeshɔn dɛn, rivyu HSQY dɛn EVOH-based ay-baria PET/PE silin film .
Anti-Fɔg BO PET/PE Fim
Anti-fog tritmɛnt de chenj di we aw kɔndens mɔstɔ de biev pan di fim we de fes di it.
Insted fכ fכm sεparat dכp dεm we wi kin si, mכsichכ de spre insay wan layεr we tכn εn transparent. Anti-fog film nɔ de pul mɔstɔ ɛn i nɔ de mek kɔndenseshɔn nɔ apin.
di pefomans dipכnt pan di it tεmprachכ, mכsichכ kכntεnt, kol spid, friji tεmprachכ, tεmprachכ fכlt, film כryenteshכn εn di tεm we i de stכr.
Rivyu HSQY in dɛn anti-fog PET/PE silin-film rεnj .
Maykrowev, Ɔvin ɛn Friza Kɔmpatibiliti
Yu tink se Standard BO PET/PE Film kin bi Maykrowev?
Standard BO PET/PE film nɔ fɔ ɔtomɛtik diskrayb as maykrowevable.
Maykrowev aplikeshɔn dɛn nid fɔ gɛt wan dediket tɛmal gred we dɛn tɛst wit di aktual tre , it, pawa lɛvɛl, ɔt tɛm ɛn stim-rilis instrɔkshɔn dɛn.
Yu tink se yu kin yuz BO PET/PE Film na Kɔnvɛnshɔnal Ɔvin?
Standard BO PET/PE film nɔto ɔtomɛtik ɔvinable. Kɔnvɛnshɔnal-ɔvin pak nid fɔ gɛt sɛpret validet ay-tɛmpracha film ɛn wan kɔmpitabl ɔvinable tre .
Yu tink se dɛn kin yuz BO PET/PE Film fɔ Frɔzɛn Fɔd?
Dɛn kin mek sɔm lɔw tɛmpracha strɔkchɔ dɛn we dɛn dɔn pik, bɔt dɛn nɔ spɛsifa di standad lɔk-sil gred as friza-sef.
Friza tɛst fɔ evaluate impak rɛsistɛns, film fleksibiliti, laminate bond, sil ritɛnshɔn ɛn opin bihayvya afta thaw.
Tray-Sealing Mashin Kɔmpatibiliti
BO PET/PE rolstɔk kin kɔnvɔyt fɔ manual, sɛmi-ɔtomɛtik, rɔta ɛn ful ɔtomɛtik tre silin mashin dɛn.
Di wan dɛn we de bay fɔ gi:
Tray-sealer manifakta ɛn mɔdel
Tray mold ɛn kaviti layout
Width we dɛn nid fɔ mek di fim
Kor insay dayamita
Maksimal rol ausayd dayamita
Maksimal wet we di rol gɛt
PE sial sayd wund insay ɔ na do
Film unwind dairekshɔn
Di tɛmpracha we dɛn kin sial
Prɛshɔn fɔ sial
Dwɛl tɛm
Prodakshɔn spid
Sistem fɔ kɔt fim
Sensa fɔ print-rɛjista
Atmosfɛrik, gas-flush ɔ MAP prɔses
HSQY de saplae bak fud tre siling mashin fɔ standad ɔt silin ɛn sɛlɛkɛt MAP aplikeshɔn dɛn.
Aw fɔ Establish di Kɔrɛkt Silin Windo
di siling winda na di rεnj כf tεmprachכ, prεshכn εn dεlεd tεm we de mek wan akseptabl pakej we nכ de damej di film כ tre .
Prodakshɔn trayal dɛn fɔ ebul fɔ evaluate:
Minimum sil-initiashɔn tɛmpracha
Maksimal tɛmpracha bifo film ɔ tre distɔrshɔn
Prɛshɔn we dɛn nid fɔ sial
Minimum ifektiv tɛm fɔ de
Hot-tak trɛnk
Sial trɛnk afta yu dɔn kol
Pil-initiashɔn ɛn prɔpageshɔn fɔs
Wan-pies opin bihayvya
Sil-thru-kɔntaminɛshɔn pefɔmɛns
Wrinkles ɛn chanɛl lik
Tray-flange difɔmeshɔn
Film tracking ɛn kɔt
Lik ɛn bɔrst rɛsistɛns
Kɔmɔn BO PET/PE Prɔblɛm dɛn fɔ sial
| Prɔblɛm |
Posisibul Kɔz |
Aytem dɛn fɔ Chɛk |
| Film Nɔ De Sial |
Inkompatibl tre surface, rivεs film, lכw tεmprachכ כ po tul kכntakt |
Tray flange, PE siling sayd, temperechur, prɛshɔn ɛn tɛm fɔ de |
| Wik ɔ Inkɔnsistɛns Sil |
Fɔd kɔntaminɛshɔn, nɔ ivin tre , nɔ stebul tɛmpracha ɔ nɔ inɔf prɛshɔn |
Flɛnch klin, tre flatnɛs, mashin kɔntrol ɛn silin tul |
| Fim we Izi-Pil Na I at fɔ Opin |
Tɛmpratura we pasmak, prɛshɔn ɔ tɛm fɔ de, ɔ wan gred we nɔ kɔrɛkt fɔ silin |
Kɔnfɛm di izi-pil gred ɛn ajɔst di siling winda |
| Sil De Opin Tu Izi |
Insufishɛnt siling ɛnaji ɔ wik pasmak fɔmyulashɔn fɔ di pil |
Film gred, tre surface, prɛshɔn, tɛmpracha ɛn kondishɔn tɛm |
| Film Tears Insted of fɔ pul am |
di sil trεnk pas di film strכng כ di tre nכ gεt wan ifektiv peel tab |
Film tiknes, peel fos, laminate bond ɛn tre dizayn |
| Wrinkles na di Sil |
Nɔ ivin wɛb tɛnsiɔn, po trakin, tre distɔrshɔn ɔ tul misalaynmɛnt |
Rol tɛnsiɔn, wɛb alaynɛshɔn, tre pozishɔn ɛn tul flatnɛs |
| Pakɛj Lik dɛn |
Chanɛl lik, kɔntaminɛshɔn, film pankchɔ, krak trey dɛn ɔ inkɔmplit sil |
Flɛnch klin, film intɛgriti, tre kɔndishɔn ɛn kɔmplit sil kɔntinyuiti |
| Film Delamination |
Nɔ adekwayt adhesive cure, pasmak ɔt ɔ kemikal ɛkspos |
Bond strכng, kכryu tεm, rεsidyual sכlvεnt εn it kכmכshכn |
| Poor Rol Fidin we nɔ fayn |
Teleskoping, blok, inkɔrɛkt wayndin ɔ nɔ fayn kɔfishin fɔ frikshɔn |
Rol kɔnstrɔkshɔn, stɔrɔj, wɛb tɛnsiɔn ɛn wayndin dairekshɔn |
Kɔstɔm-Print BO PET/PE Fim
Di BOPET ɔda layt de gi wan stebul ɛn klia printin sɔfa fɔ branded tre pak.
Di wok dɛn we dɛn kin du fɔ mek fim dɛn we dɛn print kin gɛt:
Brand logo ɛn prɔdak nem dɛn
Di tin dɛn we dɛn yuz ɛn infɔmeshɔn bɔt it
Instrɔkshɔn fɔ stɔrɔj, opin ɛn pripia
Bakɔd ɛn QR kɔd dɛn
Date-code ɛn batch-code eria dɛn
Transparent prodakt winda dɛn
Rejista mak fɔ ɔtomɛtik tre sila dɛn
Di wan dɛn we de bay fɔ gi at wok we dɛn kin ɛdit, di fim wit, print ripit, kɔlɔ rɛfrɛns, ay-mak pozishɔn, tre ɔriɛnteshɔn ɛn PE silin-sayd wayndin dairekshɔn.
Fɔ Kɔmplians fɔ Fɔd-Kɔntakt
Fɔd-kɔntakt suitabiliti dipen pan di ɛksaktɔl BOPET rɛsin, PE silan, adeziv, barɛri layt, anti-fɔg tritmɛnt, ink, it tayp, kɔntakt durayshɔn ɛn stɔrɔj kɔndishɔn.
Di wan dɛn we de bay fɔ aks fɔ di dɔkyumɛnt dɛn we de fɔ di rayt fim gred we dɛn dɔn gri fɔ, we gɛt fɔ du wit:
Teknik data sheet matirial
Sɛtifiket fɔ di analisis
Fɔd-kɔntakt diklareshɔn
Maygrɛshɔn ɔ kɔmplians tɛst ripɔt dɛn
Di we aw dɛn de tɛst di sil-strɛng
Ristrikt-sɔbstans stetmɛnt dɛn
Batch traceability infɔmeshɔn
ISO kwaliti-sistim sɛtifikeshɔn nɔ fɔ prɛzɛnt as prodak-spɛsifi k pruf se ɛvri fim ɔtomɛtik fala ɔl di it-kɔntakt rigyuleshɔn dɛn.
Yu tink se BO PET/PE Sial Film Risaykul?
BOPET εn PE de pan difrεn polimכr famili dεm. Wan BO PET/PE laminate nɔ fɔ ɔtomɛtik diskrayb as mono-matirial ɔ yunivasal risaykul fim.
Aktual risaykulbiliti dipen pan:
BOPET -to-PE rεshכ
EVOH ɔ ɔda layers we de wok
Lamineshɔn adhesive
Printin ink ɛn anti-fɔg tritmɛnt dɛn
Matirial fɔ trey
If di lid kin separet frɔm di tre
Fɔd kɔntaminɛshɔn
Lokal kɔlɛkshɔn ɛn sɔt infrastukchɔ
Destineshɔn-maket dizayn-fɔ-risaykul gaydlayn dɛn
Mono- PET -kompatibl kot film ɔ PE-rich risaykul-oriɛnted strɔkchɔ dɛn kin ɛvaluet as sɛpret prɔjek.
Di Opshɔn dɛn fɔ Kɔstɔmayz
Kastom tot ɔl film tik
Kastom BOPET ɛn PE layt rεshɔn
Izi-pil, had-pil ɔ lɔk-sil fɔmyulashɔn
Customized peel fos ɔ weld trɛnk
Anti-fɔg tritmɛnt
EVOH ay-barɛri strɔkchɔ
Kastom OTR ɛn WVTR target dɛn
Sil-thru-kɔntaminɛshɔn pefɔmɛns
Struktrɔ we nɔ de pan pankchɔ
Aplikeshɔn-spɛsifi k maykrowev ɔ tɛmal gred
Aplikeshɔn-spɛsifi k friza gred
Kastom printin ɛn rɛjista mak dɛn
Kastom rol wit ɛn lɔng
Kastom kor ɛn maksimal rol dayamita
Kastom winding dairekshɔn
Kastom katon, lɛbl ɛn ɛkspɔt palet
Kwaliti-Kɔntrol Rikwaymɛnt dɛn
BOPET ɛn PE raw-matirial verifyeshɔn
Total film tiknes ɛn tolɛreshɔn
Rol wit ɛn lɔng
Kor saiz ɛn rol ɔdasay dayamita
Winding tension ɛn rol alaynɛshɔn
Transparency, haze ɛn glos
Lamineshɔn-bɔnd trɛnk
Residual solvent we i apɔynt
Kofishin fɔ frikshɔn
Sil-initiashɔn tɛmpracha
Hot-tak trɛnk
Pil ɔ lɔk-sil trɛnk
Wan-pies opin bihayvya
Pankchɔ ɛn tɛnsiɛl pefɔmɛns
Anti-fog tɛst we dɛn spɛsifa am
OTR ɛn WVTR we dɛn spɛsifa
Print kɔlɔ ɛn rɛjista kɔrɛkt wan
Fɔd-kɔntakt dɔkyumentri rivyu
Infɔmeshɔn we Yu nid fɔ gɛt Kot
Tray matirial ɛn kɔmplit layt strɔkchɔ
Material pan di tre silin flɛnch
Fizik tre sampul dɛn
Tray dimɛnshɔn ɛn flɛnch wit
Fɔd ɔ prɔdak we dɛn pak
Fɔd filin tɛmpracha
Ambient, chilled ɔ frɔzɛn stɔrɔj kɔndishɔn dɛn
I izi fɔ pul ɔ lɔk-sil rikwaymɛnt
Existing film sampul ɔ target peel fɔs
Anti-fog we dɛn nid
High-barrier ɔ MAP rikwaymɛnt
OTR ɛn WVTR we dɛn nid
Maykrowev, ɔvin ɔ friza we yu nid
Rikwayd film tik
Film wit ɛn rol lɔng
Kor insay dayamita
Maksimal rol ausayd dayamita ɛn wet
PE siling-sayd winding dairekshɔn
Tray-sealer manifakta ɛn mɔdel
Sial tɛmpracha, prɛshɔn ɛn tɛm fɔ de
Prodakshɔn spid
Fim we dɛn print ɔ we dɛn nɔ print
Atwok ɛn print ripit lɔng
Dokumɛnt we dɛn nid fɔ gɛt fɔ kɔntakt it
Ɔda kwantiti ɛn ɛni ia kɔnsɔmshɔn
Di kɔntri we yu want fɔ go, di pɔt ɔ adrɛs usay dɛn de sɛn di tin dɛn
Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt BO PET/PE Sealing Film
Wetin na BO PET/PE lidding film we dɛn mek wit?
i nכmal fכ kכnsis fכ wan biaxially oriented PET כta layεr we dεn laminεt to wan modifyed PE fכd-kכntakt siling layεr.
BO PET/PE na di sem wit PET/PE film?
BO PET/PE na wan spεsifi k PET/PE strכkchכ we di PET כta layεr dεn bin biakshal כriεnt fכ impruv strכng εn dimεnshכnal stεbiliti.
Wetin di BOPET layt de du?
BOPET de gi klia, glos, tɛnsiɛl trɛnk, stiffnɛs, dimɛnshɔnal stebiliti ɛn wan ɔda say we dɛn kin print.
Wetin di PE layt de du?
Di modifyed PE layt de mek di ɔt sil ɛn kɔntrol izi-pil ɔ lɔk-sil bihayvya pan wan kɔmpitabl tre flɛnch.
Yu tink se BO PET/PE kin sial fim PET/PE trey dɛn ?
Yɛs. PET/PE trey dɛn wit wan kompitibul PE siling surface na di praymar aplikeshɔn.
I kin sial PET/EVOH/PE trey dɛn ?
Bɔku tɛm i kin kɔmpitabl we di ɔdasay silin layt na di tre de kɔntinyu fɔ bi PE. Di kɔmplit barɛri ɛn sil fɔ stil tɛst.
BO PET/PE kin film sil plein APET ɔ r PET trey dɛn ?
Nɔto fɔ se na so i bi. Wan plein PET flɛnch kin nid fɔ gɛt dairekt-to- PET kɔtin ɔ ɔda PET -kɔmpatibl silin layt.
BO PET/PE kin film sial PP trey dɛn ?
Standard kompitibiliti nɔ fɔ bi asum. PP trey dɛn nɔmal fɔ nid BOPET /CPP ɔ ɔda PP-kɔmpatibl silin strɔkchɔ.
Wetin na di difrɛns bitwin izi fɔ pul ɛn lɔk sil?
Fim we izi fɔ pul kin opin wit pawa we dɛn kin kɔntrol. Lɔk-sil film de fɔm wan strɔng ɔ substantially pɔrmanent kloz.
Us tik tik dɛn de?
di kכrant rεfrεns rεnj na lεk 52–90 μm, wit kכstכm tiknes dεm we de.
Us rol wit dɛn de?
di rεfrεns wit rεnj na lεk 150–900 mm. Di waid dɛn we dɛn pik inklud 180 mm, 320 mm, 400 mm ɛn 640 mm.
Wetin na di standad rol lɔng?
Sεlektεd standad prodakt dεm de yuz wan rεfrεns rol lεngth we de arawnd 500 m.
Yu tink se anti-fog BO PET/PE fim de?
Yɛs. Dɛn kin mek anti-fɔg tritmɛnt fɔ it we dɛn dɔn kol, salad, mit, sifud, dairy ɛn rɛdi-mɛl pak.
Na standad BO PET/PE film ay barɛri?
nכ, wan difayn כksijεn barεri nכmal wan nid EVOH כ כda validet hεy-barεri layεr.
Yu tink se dɛn kin yuz BO PET/PE fim fɔ MAP ?
Yes, we dɛn kɔba wan ay-baria fim wit wan kɔmpitabl ay-baria tre , rilibul sil ɛn validet MAP prɔses.
Yu tink se standad BO PET/PE film kin bi maykrowev?
Standard film nɔ fɔ ɔtomɛtik wan de na maykrowev. Wan sɛpret kwalifay maykrowev-grɛd fim nid fɔ de.
Yu tink se yu kin yuz standad BO PET/PE film na oven?
Standard film nɔ kin ɔtomɛtik ɔvenable. Wan dediket ay-tɛmpracha fim ɛn kɔmpitabl tre nid fɔ de.
Yu tink se yu kin yuz BO PET/PE film fɔ frɔzɛn it?
Dɛn kin mek wan gred we gɛt lɔw tɛmpracha, bɔt di standad lɔk-sil gred we de naw nɔ spɛsifa as friza-sef.
Wetin mek di fim nɔ de sial to di tre ?
Di kɔmɔn tin dɛn we kin mek i apin na wan flɛnch we nɔ kɔmpitabl, rivas fim, inɔf ɔt, nɔ fayn prɛshɔn, shɔt tɛm fɔ de ɔ di tul kɔntakt nɔ fayn.
Wetin mek di fim we izi fɔ pul kin rɔtin we dɛn de opin am?
di sil trεnk kin pas di film trεnk, di laminat kin dεmεj כ di tre kin nכ gεt wan ifektiv pil tab.
Di fim kin sial tru sos, ɔyl ɔ mɔstɔ?
fכmulashכn dεm we dεn sεlekt kin tכlerεt sכm kכntaminεshכn, bכt di tre flenj fכ stil kip as klin εn dray as i posbul.
Yu tink se BO PET/PE film kin bi kɔstɔm print?
Yɛs. Dɛn kin print logo, grafik, prɔdak infɔmeshɔn, barɔd, QR kɔd ɛn rɛjista mak dɛn akɔdin to at wok we dɛn dɔn gri fɔ.
Na BO PET/PE lidding film risaykul?
na mכlti-polimכr laminat εn i nכ de aksept am כlsay na PET כ PE risaykul sistεm. Di kɔmplit pakej nid fɔ gɛt wan asɛsmɛnt fɔ di makit.
Wetin na di minimum ɔda kwantiti?
Di kɔrɛnt rɛfrɛns MOQ na lɛk 1,000 kg pan wan spɛsifikɛshɔn.
Wetin na di prodakshɔn lida tɛm?
Di rεfrεns lida tεm na lεk 10–15 dez fכ sεlekt standad prodak dεm afta dεn kכnfכm di spεsifikεshכn εn dipכsit.
A kin aks fɔ sampul ɔ trial rol?
Sampl ɔ trayal rol kin tɔk bɔt fɔ tre kɔmpatibiliti, izi-pil, lɔk-sil, anti-fɔg, barɛri ɛn prodakshɔn-layn tɛst.
Rikwest wan BO PET/PE Pakɛj Silin Film Kot
Yu de luk fɔ BO PET/PE lidding-film manifakta, izi-pil tre film, lɔk-sil film, anti-fɔg film ɔ EVOH ay-baria pak sɔlvishɔn?
Kɔntakt HSQY fɔ aks fɔ tɛnki rɛkɔmɛndishɔn, tre kɔmpatibiliti tɛst, trayal rol, kɔstɔm printin, rol spɛsifikɛshɔn, faktri prayz ɛn intanashɔnal shiping infɔmeshɔn.
Rikwest fɔ kot di prayz
