Lok-sil PET/PE Lidding Film fɔ Trey dɛn

Wetin Na Lɔk-Sil PET/PE Lidin Film?

Lɔk-sil PET/PE lidding film na laminated trey-siling film we dɛn mek fɔ mek wan strɔng, nɔ-izi-pil klos pan kɔmpatibl it trey ɛn kɔntena dɛn. Di PET ɔ BOPET ɔda layt de gi tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, klia, pankchɔ rɛsistɛns, ɛn wan say we dɛn kin print. Di PE-based insay layt de gi ɔt silin to wan kɔmpitabl PE silin sɔfays.

Lɔk sil, we dɛn kin kɔl bak weld sil ɔ pɔrmanent sil, de put di tin dɛn we de mek di paket sikyɔriti, di pruf fɔ tamper, fɔ kɔntinyu fɔ gɛt wata, ɛn di trɛnk we dɛn de sheb am fɔs. I difrɛn frɔm wan fim we izi fɔ pul, we dɛn mek fɔ opin wit wan lɔwa ɛn mɔ kɔntrol kɔshɔma pil fɔs.

HSQY de saplae nominal tiknes frɔm 0.052mm to 0.09mm , rol wit frɔm 150mm to 900mm , ɛn standad 500m rol wit kɔstɔm kɔnvɛnshɔn we de. Di standad gred we de na dis pej nɔto ɔtomɛtik ay barɛri, friza sef, maykrowev, ɔ ɔvin. Dɛn wok ya nid fɔ gɛt wan sɛpret spɛsifikɛd strɔkchɔ ɛn kɔmplit-pakɛj tɛst.

Wetin Mek Yu fɔ Yuz Lɔk-Sil Lidin Film?

• Strɔng pɔrmanent klos: I de gi ay-strɛng sil fɔ paket dɛn we nɔ mek fɔ izi kɔshɔma fɔ pul.

• Tamper evidence: If yu opin am, yu go si se yu go te di fim ɔ pwɛl di trey flɛnch, we de sho se di paket de ambɔg am.

• Liquid containment: Weld sil we dɛn validet kɔrɛkt wan kin sɔpɔt prɔdak dɛn we gɛt sos, marinade, purge, ɔ ɔda likwid.

• Distribushɔn sikyɔriti: If di sil strɔng, i kin ɛp di paket dɛn fɔ bia we dɛn de handle, stak, vaybreshɔn, ɛn transpɔt.

• Klia prodak prɛzɛnteshɔn: Transparent PET/PE strɔkchɔ dɛn kin gi visibiliti ɛn glos.

• Kastom printin: Di PET surface de sɔpɔt branding, pripia instrɔkshɔn, barkɔd, ɛn traceability.

• Anti-fog opshɔn: Wan fayn anti-fɔg gred kin mek pɔsin si fayn fayn wan fɔ it dɛn we dɔn kol, we gɛt mɔstɔ.

• Kastom rol kɔnvɔshɔn: Yu kin mach di wayd, lɔng, kɔr, wayndin dairekshɔn, rol wet, ɛn ɔda dayamita to di trey sila.

Lok Seal vs. Izi Peel

Di standad prodak na dis pej de posishun as lok-sil gred. Dɛn nɔ fɔ tɔk bɔt am as klin pil ɔ izi fɔ opin pas dɛn gi am wan sɛpret silin strɔkchɔ we pɔsin kin pul ɛn validet.

Aw di BOPET/PE Laminate De Wok

Lok-Sil PET/PE Lidding Film Spesifikasi

Di spesifikeshɔn dɛn we de dɔŋ ya de kip di kɔrɛnt kɔmɛshɔnal valyu dɛn we dɛn de separet standad pefɔmɛns frɔm opshɔnal fɛnshɔnal gred dɛn. Faynal garanti prɔpati dɛn fɔ de na di tɛknikal data shit we dɛn dɔn gri fɔ, sampul aprɔval, ɛn ɔda we fɔ bay.

Us Trey dɛn we PET/PE Lɔk-Sil Film Sil?

Standart PET/PE vs. Ay-Bɛri PET/EVOH/PE

Wan standad BOPET/PE laminate nɔ fɔ promot as ay barɛri jɔs bikɔs i gɛt PET. High-barrier klem dɛn nid fɔ gɛt difayn fɛnshɔnal layt ɛn mɛzhɔ OTR ɛn WVTR valyu dɛn.

Sil Intɛgriti ɛn Lik Prɛvenshɔn

Strɔng fim nɔ kin mek wan paket we nɔ gɛt lik. Di sil intɛgriti dipen pan di trey flɛnch, film silan, tul flatnɛs, tɛmpracha, prɛshɔn, di tɛm we i de de, wɛb tɛnsiɔn, filin prɔses, ɛn kɔntaminɛshɔn na di silin sɔfays.

Kɔntaminɛshɔn Tolɛreshɔn

Fɔd rɛsɛdyu na di trey flɛnch kin ridyus di sil trɛnk ɛn mek lik pat. Projɛkt dɛn we gɛt fɔ du wit sos, ɔyl, mɔstɔ, paoda, fɔ pul mit, ɔ patikyula tin dɛn fɔ inklud kɔntaminɛt-sil tɛst na di kɔmɛshɔnal layn spid we dɛn dɔn plan.

• Test klin ɛn intentionally contaminated trey flanges.

• Mekɔp di sil trɛnk na ɔl di tre sayd dɛn, kɔna dɛn, ɛn kɔmpawtmɛnt dɛn.

• Yuz wan we we dɛn gri fɔ yuz vaykum, prɛshɔn-dɛkay, day, ɔ bɔbul lik-tɛst we.

• Konfam di sil stil akseptabl afta chilled stכrej εn transpכt simulεshכn.

• Difayn akseptabl lik rit ɛn vijual sil krayteria bifo prodakshɔn.

Anti-Fɔg ɛn Kastɔm ​​Printin Opshɔn dɛn

Dɛn kin ad anti-fɔg tritmɛnt fɔ di prɔdak dɛm we dɛn dɔn kol usay kɔndɛns kin mek di it nɔ klia. Spɛsifik di anti-fɔg sayd, siling sayd, winding dairekshɔn, stɔrɔj ​​tɛmpracha, it mɔstɔ, ɛn target displei layf.

Kastom printin kin inklud branding, ingridiɛnt, instrɔkshɔn, barɔd, QR kɔd, batch-kɔd eria, ɛn transparent prodak winda. Kɔnfɛm di we aw dɛn print am, di kɔlɔ standad, di print ripit, ay-mak pozishɔn, rɛjista tolɛreshɔn, ɛn if di print na sɔfa ɔ rivas print.

Tin dɛn fɔ Tink bɔt fɔ Risaykul

PET/PE laminate gɛt mɔ pas wan polima famili ɛn dɛn nɔ fɔ diskrayb am ɔtomɛtik wan se i kin risaykul na ɛvri makit. Risaykul dipen pan di kɔmplit strɔkchɔ, layt pasɛnt, adeziv, ink, kɔtin, tre matirial, lokal kɔlɛkshɔn lɔ, ɛn risaykul infrastukchɔ.

We risaykul na di praymar rikwaymɛnt, kɔmpia di kɔvɛnshɔnal PET/PE laminat wit wan kwalifay PE-dominant lid strɔkchɔ ɛn chɛk fɔ kɔmpitibliti wit di trey we yu dɔn pik ɛn lokal dizayn-fɔ-risaykul gayd.

Tray-Sealer ɛn Rol Kɔmpatibiliti

Gi di trey-sila brand ɛn mɔdel, film wit, kɔr insay dayamita, maksimal ɔda dayamita, rol wet, wayndin dairekshɔn, sil-sayd ɔriɛnteshɔn, ay-mak sɛns, tul layout, ɔpreshɔn spid, tɛmpracha, prɛshɔn, ɛn tɛm fɔ de.

Layn trayal fɔ evalyu wɛb trak, tɛnsiɔn, kɔt, sil kɔntinyuiti, wɛld trɛnk, bɔrst pefɔmɛns, lik, kɔntaminɛshɔn tolɛreshɔn, print rɛjista, anti-fɔg pefɔmɛns, trey distɔrshɔn, ɛn pefɔmɛns afta di tɛm we dɛn bin want fɔ kip am.

Kwaliti-Kɔntrol Rikwaymɛnt dɛn

• Tiknes profayl: I de inflɔws stiffness, rol bild, trak, siling rispɔns, ɛn pankchɔ pefɔmɛns.

• Lamination bond strength: Konfam PET ɛn PE layers de stil sikyuɔri bon.

• Di trɛnk we di sil gɛt: Dɛn fɔ mɛzhɔ am bay we dɛn gri fɔ yuz di we aw dɛn gri fɔ du am ɛn di rial trey.

• Sil initiashɔn tɛmpracha: I de mek di lɔwa limit fɔ di ɔpreshɔn winda.

• Coefficient of friction: I de afɛkt unwinding, wɛb transpɔt, ɛn ay-spid mashinability.

• Optik kwaliti: I gɛt haz, glos, jel, skrat, blak spat, ɛn kɔntaminɛshɔn.

• Rol kwaliti: Inklud ed alaynɛshɔn, tɛliskɔp, wrinkles, jɔyn, kɔr kɔndishɔn, ɛn wayndin dairekshɔn.

• Baria data: Dɛn fɔ gi OTR ɛn WVTR we dɛn de klem shelf-layf ɔ MAP pefɔmɛns.

Tipik Aplikeshɔn dɛn

• PET/PE rɛdi-mɛl ɛn pripia-fud trey dɛn

• Fresh mit, bɔd, ɛn sifud pak dɛn we de yuz wan fayn barɛri strɔkchɔ

• Chiz, dairy, deli, ɛn prosɛs-fud trey dɛn

• Fresh prodyuz ɛn salad pak wit opshɔnal anti-fɔg

• Fɔd dɛn we gɛt wata we nid fɔ gɛt strɔng sil we go de sote go

• Tamper-evident fud-savis ɛn kɔntrakt-pak aplikeshɔn dɛn

• Kastom print rital it pakej

• PET/EVOH/PE MAP trey dɛn we de yuz wan kɔmpitabl ay-baria lid

Eksplore HSQY's PET/PE trey rɛnj ɛn PET/PE trey siling film kategori fɔ rilayt pak sɔlvishɔn dɛn.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

1. Trey matirial, layt strɔkchɔ, spɔlayt, prodak kɔd, drɔin, ɔ fizik sampul

2. Trey dimɛnshɔn, flɛnch wit, kɔmpatmɛnt, ɛn fil wet

3. Rikwayd lɔk-sil trɛnk ɛn akseptabl film ɔ trey fayl mɔd

4. Di kayn it, ɔyl, mɔs, sos, paoda, ɛn flɛnch-kɔntaminɛshɔn risk

5. Filin tempɔret, stɔrɔj ​​tɛmpracha, distribyushɔn kɔndishɔn, ɛn target shelf layf

6. Nid fɔ standad barɛri, ay barɛri, MAP, anti-fɔg, printin, ɔ izi fɔ pul

7. Trey-siling mashin brand, model, tul layout, ɛn kɔmɛshɔnal layn spid

8. Film tiknes, wit, lɔng, kɔr ID, maksimal ɔta dayamita, rol wet, ɛn wayndin dairekshɔn

9. OTR, WVTR, gas miks, rεsidyual-כksijεn, lik-rεt, כ burst rikwaymεnt we i apɔynt

10. At wok, nɔmba fɔ di kɔlɔ dɛn, print ripit, ay-mak pozishɔn, ɛn rɛjista tolɛreshɔn

11. Rikwayd fud-kɔntakt, maykreshɔn, kwaliti, ɛn dɛstineshɔn-maket dɔkyumentri

12. Trayal kwantiti, anual volyum, dilivri dɛstineshɔn, ɛn di de we dɛn aks fɔ lanch

Rikwest Lɔk-Sil Film Sampul ɛn Prayz

Kastamayzeshɔn Savis dɛn

• Kastom 0.052–0.09mm tik ɛn tolɛreshɔn

• Kastom 150–900mm rol wit

• Kastom rol lɔng, kɔr, rol wet, maksimal ɔta dayamita, ɛn wayndin dairekshɔn

• Lɔk-sil, had-pil, ɛn sɛpret divɛlɔp izi-pil strɔkchɔ dɛn

• Anti-fɔg, ay-baria, MAP, lɔw-tɛmpracha, ɛn tɛmral-grɛd divɛlɔpmɛnt

• Fleksografik ɔ gravy printin fɔ branding ɛn traceability

• Kastom ay mak, print ripit, transparent winda, kɔdin eria, perforeshɔn, ɛn venting

• Trey kompitibiliti rivyu, sil-window trials, kontamineshɔn tɛst, ɛn lik tɛst

• Kastom katon, rol lɛbl, palet mak, ɛn intanashɔnal delivri

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi kwaliti-mɛnejmɛnt, inspekshɔn, ɛn matirial dɔkyumentri we de fɔ di gred we dɛn dɔn gri fɔ. Di wan dɛn we de bay fɔ aks fɔ di tɛknikal data shit, sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn, maykreshɔn ɔ kɔmplians ripɔt, sil-strɛng we, barɛri data we i apɔynt, ɛn rol inspekshɔn krayteria.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim sɛtifiket ɛn dɛn nɔ fɔ prɛzɛnt am as prodak-spɛsifi k pruf fɔ sef fɔ it-kɔntakt. SGS ɔ it-kɔntakt klem fɔ no di rayt ripɔt, di laminate strɔkchɔ, di kayn it, di tɛmpracha, di tɛm we dɛn fɔ tek, ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz.

HSQY Intanɛshɔnal Ɛgzibishin dɛn

Prodakshɔn ɛn Pak

Pakɛj ɛn Delivri

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm

Wetin na lɔk-sil PET/PE liding film?

Na BOPET/PE laminate we dɛn mek fɔ mek wan strɔng pɔrmanent sil to wan kɔmpitabl PE silin sɔfays pan tre ɔ kɔntena.

Wetin lɔk sil min?

Lɔk sil min weld-tayp sil we nɔ mek fɔ pul opin izi wan. We yu opin am, i kin te di fim ɔ i kin pwɛl di trey flɛnch we yu kin si.

Us trey dɛn kin PET/PE lɔk-sil film sial?

Di standad PE sialant na fɔ PET/PE, PET/EVOH/PE, PE, ɔ PE-kɔt trey wit kɔmpatibl PE silin sɔfays.

I kin sial klin APET, CPET, ɔ PP trey dɛn?

Nɔto ɔtomɛtik wan. Plɛn PET, CPET, ɛn PP sɔfays dɛn kin nid difrɛn silan kemistri bɔku tɛm. Test di aktual trey bifo yu ɔda.

Na lok-sil PET/PE film izi fɔ pul?

Nɔ, wan lɔk-sil gred de prɔyoritɛt fɔ lɔk fɔ ɔltɛm. I izi fɔ pul am nid fɔ gɛt wan sɛparet fɔmulayt silin layt.

Na standad BOPET/PE film ay barɛri?

Nɔto fɔ se na so i bi. Wan difayn ay-baria strɔkchɔ, lɛk PET/EVOH/PE, ɛn mɛzhɔ OTR ɛn WVTR valyu dɛn nid fɔ ay-baria klem.

Yu tink se di fim go ebul fɔ mek ɛni lik?

No film nɔ go ebul fɔ gi garanti fɔ mek i nɔ lik bay insɛf. Di sil intɛgriti de dipen bak pan trey kwaliti, flɛnch kɔntaminɛshɔn, tul, tɛmpracha, prɛshɔn, tɛm fɔ de, ɛn aw fɔ handle.

Yu tink se anti-fog de?

Yɛs. Dɛn kin mek wan anti-fɔg gred fɔ it dɛn we dɛn dɔn kol usay kɔndenseshɔn kin ridyus di visibiliti.

Yu tink se di standad gred friza, maykrowev, ɔ ɔvin sef?

Nɔ, di standad gred we de naw, dɛn rayt am as nɔ-friza, nɔ-maykrowev, ɛn nɔ-ovenable. Speshal gred dɛn nid fɔ gɛt sɛpret tɛst.

Yu tink se dɛn kin print di fim bay dɛnsɛf?

Yɛs. Fɔ print kin gɛt logo, di tin dɛn we yu fɔ yuz, instrɔkshɔn, barɔd, QR kɔd, deti-kɔd eria, ɛn transparent prodak winda.

Yu tink se PET/PE lidding film kin risaykul?

I nɔ fɔ tek am se i kin risaykul ɔlsay bikɔs i de jɔyn difrɛn polima famili dɛn. Risaykul dipen pan di kɔmplit strɔkchɔ ɛn lokal kɔlɛkshɔn sistɛm.

Us saiz dɛn de?

Di pej de list standad wit dɛm we na 180mm, 320mm, 400mm, ɛn 640mm, wan kɔstɔm rɛnj we na 150–900mm, tiknes we na 0.052–0.09mm, ɛn wan standad rol lɔng we na 500m.

Wetin kin mek di weld sil wik?

Di kɔmɔn tin dɛn we kin mek i apin na we di trey sɔfa we nɔ kɔmpitabl, di flɛnch kɔntaminɛshɔn, di tɛmpracha we nɔ fayn, prɛshɔn ɔ tɛm fɔ de, di tul dɛn we nɔ ivin, ɔ di tɛnsiɔn we di fim nɔ de wok fayn.

Wetin na di minimum ɔda kwantiti?

Di MOQ we dɛn se naw na 1000kg. Sampl ɛn trayal kwantiti dipen pan stok, wit, printin, barɛri, ɛn sil rikwaymɛnt.

A kin aks fɔ sampul bifo bɔku bɔku prodakshɔn?

Yɛs, i go bi se di tin dɛn we de de ɛn di tin dɛn we dɛn tɔk bɔt. Send di trey sampul, mashin ditel, fud aplikeshɔn, film dimɛnshɔn, ɛn di sil trɛnk we dɛn nid.

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae lɔk-sil PET/PE lidding film, PET/PE trey, PET/EVOH/PE ay-baria trey ɛn film, anti-fɔg film, izi-pil film, plastic shit, ɛn rilat pak prodak fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt trey kɔmpatibiliti, sil-strɛng divɛlɔpmɛnt, film-strɔkchɔ sɛlɛkshɔn, rol kɔnvɔshɔn, printin, anti-fɔg ɛn barɛri sɛlɛkshɔn, sɛmpul, prodakshɔn-layn trayal, kwaliti dɔkyumentri, ɛkspɔt pak, ɛn intanashɔnal delivri.

Kontakt HSQY fɔ Lɔk-Sil PET/PE Film