CPLA PRODƆKT PROFƐSHƆNAL MANUFAKTƆR

1.Us matirial na polylactic acid (PLA)?

 

Polilaktik asid (PLA) na bayɔ-bɛs ɛn bayɔdigradabl polima we dɛn mek wit rinuɔbal risɔs ɛvri ia. Polilaktik asid na wan tɛmplastik alifatik poliɛsta. di laktik asid כ laktayd we dεn nid fכ prodyuz polilaktik asid dεn kin gεt am bay fεmεntεshכn, dεhaydrayshכn εn kכlin di rinuכbal risכs dεm. Polilaktik asid jεnarali gεt gud mεkanikal prכpati εn prכsεsin prכpati, εn polylactic asid prodakt dεm kin dכn kwik kwik wan difrεn we dεm afta dεn dכn trowe dεm, εn dεn rili nכ pכlushכn.

 

2.Wetin bayoplastik min?

 

Envayrɔmɛnt protɛkshɔn
Bayoplastik dɛn we dɛn mek wit bayɔmas we dɛn kin yuz ɛvri ia kin ridyus wi kabon futprin ɛn ridyus wi dipen pan fɔshal risɔs. Dɛn kin gi yu bak difrɛn difrɛn we dɛn fɔ skrap.

Positiv ikɔmik bɛnifit dɛn

Di wan dɛn we de bay tin dɛn de no mɔ bɔt di bɛnifit dɛn we dɛn de gi to di envayrɔmɛnt ɛn dɛn de lɛk fɔ yuz plastic dɛn we gɛt grɔn mɔ ɛn mɔ.

 

3.Wetin mek yu fɔ pik Polilaktik Asid (PLA)?

 

Bayo-bɛs PLA rɛsin wit bɔku ɛnd-ɔf-layf opshɔn dɛn na tin we dɛn mek frɔm rinuɔbal risɔs ɛn na 100% bayɔ-bɛs akɔdin to EN16785-1. We di yusful layf dɔn, dɛn kin risaykul di polylactic acid (PLA) aplikeshɔn dɛn wit mɛkanikal ɔ kemikal. Polilaktik asid (PLA) na kɔmpɔstabl bak akɔdin to EN13432. Kɔmpɔstabl aplikeshɔn dɛn lɛk bin layna de ɛp fɔ pul valyu ɔrganik west frɔm landfil.

Yuz di raw matirial dɛn fayn fayn wan

PLA na plastic we de wok fayn fayn wan: i tek 1.6 kg shuga nכmכ fכ mek 1 kg polilaktik asid (PLA). Ɔda kayn bayɔplastik kin nid mɔ natura risɔs fɔ mek di sem kayn fayn prodak.

Yu kin yuz am pan industrial skel

PLA de fɔ kɔmɛshɔn pan industrial skel frɔm sɔm big big faktri dɛn ɔlsay na di wɔl.

Prɔvab Aplikeshɔn

Kɔmɛshɔnal prɔdak dɛn we dɛn mek wit PLA kin dɔn ɔlrɛdi de na bɔku bɔku machɔ makit dɛn. If yu intres pan mold pat, film, fom, 3D printin ɔ fayba, yu kin tɔn to wi fɔ aplikeshɔn divɛlɔpmɛnt sɔpɔt.

 

4.Raw matirial klasifikeshɔn

 

· Ay tεmprachכ PLA (CPLA): fכ dimand aplikεshכn
· Standart PLA: fכ jεnarכl pכyz aplikεshכn
· Lכw hεt PLA: dεn kin yuz am bכku tεm as sialant
· PDLA: dεn kin yuz am as nyukliatin ejen כ fכ mek כl-stεriכkכmpleks.

 

 

 

 

5.Sɛtifikeshɔn fɔ PLA matirial ɛn finish prodak

 

•Dɛn dɔn gri fɔ yuz am na fud kɔntakt aplikeshɔn na EU (EC No. 10/2011), USA (FDA 21 CFR) ɛn Chaina (GB 9685-2016),
•I de fala EN13432 ɛn ASTM D6400 standad fɔ industrial kɔmpɔstin
•Bayobased kɔntinyu fɔ 100% akɔdin to EN16785-1 ɛn ASTM D6866
•REACH Sɛtifikeshɔn
•Rɛdyus kabɔn futprin - LCA stɔdi we dɛn kɔmpin dɛn dɔn rivyu de.
•Dɛn mek am wit tin dɛn we dɛn plant.

 

 

 

 

6.Wetin na di men aplikeshɔn dɛm fɔ CPLA? 

 

1. Pak & dispɔzabl

Yogɔt pɔt, kɔfi kɔp & lid, dispɔzabl savis ware.
•Transparent
•Kɔmpɔstabl
•Bayobased
•Risaykul

2. Awtomotiv

Fɔ intɛriɔ & ɔnda-di-hud pat dɛn.
•Hay ɔt rɛsistɛns
•Durable
•Haydrolaytik stebiliti

3. 3D printin & konsuma prodakt

Injɛkshɔn-mɔld kes & haus dɛn.
•High heat resistance
•Eksɛlɛnt surface apinans
•Durable
•Gud impak resistans

4. Fayba & nɔ-wɔv

Fayba fɔ klos, wayp, dayapɛt, ɛn tɛknikal fayv & filta.
•Hay ɔt rɛsistɛns
•Gud breathability
•Sɔft & taktil fil
•Biodegradable/compostable