MAI ƙera kayayyakin CPLA KWARARREN MAI ƙera kayayyaki

1. Wane abu ne polylactic acid (PLA) yake da shi?

 

Polylactic acid (PLA) wani polymer ne da aka yi da halittu kuma mai lalacewa wanda aka yi shi da albarkatun da ake sabuntawa kowace shekara. Polylactic acid polyester ne mai thermoplastic aliphatic. Ana iya samun lactic acid ko lactide da ake buƙata don samar da polylactic acid ta hanyar fermentation, bushewa da kuma tsarkake albarkatun da ake sabuntawa. Polylactic acid gabaɗaya yana da kyawawan halaye na injiniya da kaddarorin sarrafawa, kuma samfuran polylactic acid za a iya lalata su cikin sauri ta hanyoyi daban-daban bayan an jefar da su, kuma hakika ba su da gurɓatawa.

 

2. Menene ma'anar bioplastics?

 

Kare Muhalli
Bioplastics da aka yi da biomass mai sabuntawa kowace shekara suna rage tasirin carbon da muke samu kuma suna rage dogaro da albarkatun burbushin halittu. Suna kuma bayar da zaɓuɓɓuka iri-iri na sharewa.

Fa'idodi masu kyau na tattalin arziki

Masu amfani da kayayyaki suna ƙara fahimtar fa'idodin muhallinsu kuma suna ƙara fifita robobi masu kore.

 

3. Me yasa ake zaɓar Polylactic Acid (PLA)?

 

An yi amfani da resin PLA mai tushen halitta tare da zaɓuɓɓuka da yawa na ƙarshen rayuwa daga albarkatun da ake sabuntawa kuma yana da tushen halitta 100% bisa ga EN16785-1. A ƙarshen rayuwar amfaninsa, ana iya sake amfani da aikace-aikacen polylactic acid (PLA) ta hanyar injiniya ko ta hanyar sinadarai. Ana iya yin amfani da polylactic acid (PLA) bisa ga EN13432. Aikace-aikacen da za a iya narkarwa kamar layin kwandon shara suna taimakawa wajen karkatar da sharar halitta mai mahimmanci daga wuraren zubar da shara.

Amfani da kayan masarufi masu inganci

PLA roba ce mai inganci sosai: tana buƙatar kilogiram 1.6 kawai na sukari don yin kilogiram 1 na polylactic acid (PLA). Sauran nau'ikan bioplastics na iya buƙatar ƙarin albarkatun ƙasa don samar da adadin samfurin ƙarshe.

Ana iya amfani da shi a sikelin masana'antu

Ana samun PLA a kasuwa a sikelin masana'antu daga manyan masana'antu da dama a faɗin duniya.

An Tabbatar da Aikace-aikacen

Ana iya samun kayayyakin kasuwanci da aka yi da PLA a kasuwanni daban-daban. Ko kuna sha'awar sassan da aka ƙera, fina-finai, kumfa, bugu na 3D ko zare, kuna iya komawa gare mu don tallafin haɓaka aikace-aikace.

 

4. Rarraba kayan da ba a sarrafa ba

 

· PLA mai zafi mai yawa (CPLA): don aikace-aikace masu buƙata
· PLA na yau da kullun: don aikace-aikace na gabaɗaya
· PLA mai zafi mai ƙarancin zafi: galibi ana amfani da shi azaman manne
· PDLA: ana amfani da shi azaman mai hana nucleating ko don yin duk wani abu mai stereocomplexes.

 

 

 

 

5. Takaddun shaida na kayan PLA da samfuran da aka gama

 

•An amince da amfani da shi a aikace-aikacen hulɗa da abinci a EU (EC No. 10/2011), Amurka (FDA 21 CFR) da China (GB 9685-2016),
•Ya yi daidai da ƙa'idodin EN13432 da ASTM D6400 don yin takin masana'antu
•Abubuwan da ke cikin halittu na 100% bisa ga EN16785-1 da ASTM D6866
•Takaddun Shaida na REACH
•Rage sawun carbon - binciken LCA da aka yi wa nazari a kan takwarorinsu yana nan.
•An yi shi daga amfanin gona.

 

 

 

 

6. Menene manyan aikace-aikacen CPLA? 

 

1. Marufi da abubuwan da za a iya zubarwa

Tukwanen yogurt, kofunan kofi da murfi, kayan aiki da za a iya zubarwa.
•Mai haske
•Mai narkewa
•Bayan halittu
•Ana iya sake yin amfani da su

2. Motoci

Ga sassan ciki da na ƙarƙashin murfin.
• Juriyar zafi mai yawa
• Mai ɗorewa
•Tsawon ruwa

3. Bugawa ta 3D da kayayyakin masu amfani

Kaya da gidaje da aka yi da allura.
• Juriyar zafi mai yawa
• Kyakkyawan bayyanar saman
• Mai ɗorewa
• Kyakkyawan juriyar tasiri

4. Zare da waɗanda ba a saka ba

Zare don tufafi, goge-goge, kyallen takarda, da zare na fasaha da matattara.
• Juriyar zafi mai yawa
• Ingancin numfashi
• Jin taushi da taɓawa
• Mai lalacewa/mai iya tarawa