UV Resistant Polikarbonɛt Film & Sheet

UV Resistant Polikarbonɛt Film & Sheet

HSQY UV resistant polycarbonate film ɛn sheet matirial dɛn mek am fɔ aplikeshɔn dɛn we nid fɔ gɛt kɔmbaynshɔn fɔ optik klia, impak rɛsistɛns, dimɛnshɔnal stebiliti ɛn impɔtant rɛsistɛns to UV ɛksplɔshɔn. Dipen pan di gred we yu dɔn pik, dɛn kin gi di sɔfa bak wit anti-skrach, anti-fɔg, weta-rɛsistant ɔ ɔda funkshɔn tritmɛnt fɔ dimand industrial ɛn grafik aplikeshɔn dɛn.

Di prodak de insay klia, natura ɛn kɔstɔmayt kɔlɔ dɛn wit polish, brɔsh, dayamɔn, mat ɛn ɔda sɔfays opshɔn dɛn. Standart film ɛn sheet matirial tiknes rɛnj dɛn de fɔ print, panɛl, ɔvlay, protɛktiv kɔmpɔnɛnt, blista prodak ɛn ɔda kɔnvɔyt aplikeshɔn dɛn.

UV Resistant Polikarbonɛt Film Spɛsifikeshɔn dɛn

Spɛsifikeshɔn Notis: Tiknɛs, wit, sɔfayz finish, kɔtin ɛn UV pefɔmɛns we de dipen pan di ɛksaktɔl PC gred ɛn prodakshɔn spesifikeshɔn. If yu prɔjek nid fɔ gɛt difayn UV wɛda standad, layt transmishɔn valyu, haz valyu ɔ savis-layf rikwaymɛnt, duya put am insay yu kwɛstyɔn so dat dɛn go kɔnfɔm di rayt gred.

Aw UV Resistant Polycarbonate Film De Wok

Polikabɔnɛt de gi fayn fayn impak rɛsistɛns, klia ɛn dimɛnshɔnal stebiliti, bɔt fɔ lɔng tɛm we yu de ɛkspos to ɔltra vayolɛt raytin kin afɛkt di apinɛns ɛn mɛkanikal prɔpati dɛn fɔ PC we nɔ gɛt protɛkshɔn. UV resistant polycarbonate film na so dɛn de prodyuz yuz UV-stabilized fɔmyulashɔn, protɛktiv fɛnshɔnal layers ɔ surface coatings dipen pan di gred.

Di UV protɛkshɔn de ɛp fɔ ridyus di pwɛl pwɛl we gɛt fɔ du wit di san layt, we inklud fɔ yɔlɔ pasmak, fɔ lɔs di optik apinɛns ɔ fɔ pwɛl di sɔfayz pefɔmɛns. Di ekzak weta kapabiliti dipen pan di UV protɛkshɔn sistem, di film tik, di kɔtin strɔkchɔ, klaymat ɛn di tɛm we dɛn de ɛkspos.

UV Resistant vs Standart Polikarbonɛt Film

Ki Ficha dɛn fɔ UV Resistant PC Film

• UV rεsistεns: Sεlekt grεd dεm de gi impruv rεsistεns to dεgradεshכn we kכz fכ ultraviolet εkspכzכn.

• Optik klia: Klia gred dɛn fayn fɔ aplikeshɔn dɛn we nid fɔ si ɛn fɔ transmit layt.

• Ay impak trɛnk: Polikabɔnɛt de gi strɔng rɛsistɛns to impak ɛn mɛkanikal damej.

• Dimɛnshɔnal stebiliti: I fayn fɔ ɔvlay, panɛl ɛn kɔnvɔyt kɔmpɔnɛnt usay dimɛnshɔnal kɔnsistɛns impɔtant.

• Ɔt rɛsistɛns: PC de gi bɛtɛ tɛmal pefɔmɛns pas bɔku kɔmɔn transparent komoditi plastic dɛn.

• Sɔfays opshɔn dɛn: Polish, mat, brush, dayamɔn ɛn ɔda tɛkstɔr finish dɛn de akɔdin to gred.

• Fɔnshɔnal kɔtin opshɔn dɛn: Dɛn kin tɔk bɔt anti-skrach, anti-fɔg ɛn ɔda fɛnshɔnal tritmɛnt dɛn fɔ spɛshal aplikeshɔn dɛn.

• Prosesin fleksibiliti: Dɛn kin print, kɔt, fɔm ɔ mek di gred dɛn we fit fɔ mek dɛn bi kɔmpɔnɛnt dɛn we dɔn dɔn.

Klia, Mat ɛn Tekstɔr Polikabɔnɛt Film

Surface finish gɛt dairekt ifɛkt pan di apinɛns, glare, visibiliti, printin ɛn di taktil fil fɔ di finish pat. So dɛn fɔ pik di finish we dɛn nid akɔdin to ɔl tu di tin dɛn we dɛn nid fɔ si ɛn di tin dɛn we dɛn nid fɔ du.

UV Resistant Polikarbonɛt Film Aplikeshɔn dɛn

UV resistant PC film kin bi selekt fɔ indo ɛn ɔda aplikeshɔn dɛn we nid impak rɛsistɛns, dimɛnshɔnal stebiliti, optik prɔpati ɛn impɔtant rɛsistɛns to san layt ɛksplɔshɔn.

Printin pan Polikabɔnɛt Film

Dɛn kin yuz polycarbonate film bɔku bɔku wan fɔ grafik ɔvlay ɛn print kɔntrol panɛl bikɔs fayn gred dɛn kin sɔpɔt skrin printin ɛn ɔda printin prɔses. Dɛn kin yuz printin pan di fɔs ɔ sɛkɔn say dipen pan di fim strɔkchɔ, di kɔt ɛn dizayn we dɛn dɔn mek fɔ di tin dɛn we dɛn dɔn mek.

If di fim gɛt sɔntin we nɔ de mek UV, we nɔ de skrach ɔ ɔda tin we de wok, dɛn fɔ kɔnfyus di say we dɛn kin print bifo dɛn mek am. Ink kompitibiliti, adheshon, curing kondishon en fכm rikwaymεnt fכ tεst yuz di intended prodakshכn prכsεs.

Tɛmofɔmin ɛn Fabrikeshɔn

Suitabl polycarbonate film εn tin sheet matirial gred dεm kin kכt, day-kכt, panch כ tεmכfכm insay tri-dimεnshnכl kכmכpכnεnt dεm. di kondishכn dεm we di prכsεsin de dipכnt pan di tik, kכt, sכfa tεkschur εn di dip fכ di fayn fכm pat.

Fɔ aplikeshɔn dɛn we gɛt fɔ du wit tɛmɔfɔmin, film insɛt moldin, dip fɔm ɔ printin we dɛn fala fɔ fɔm, duya gi yu drɔin ɛn prɔsesin sikyud bifo yu ɔda so dat dɛn go ebul fɔ evalyu di rayt PC gred.

UV Resistance ɛn Weathering Rikwaymɛnt dɛn

UV resistans nɔ fɔ jɔs evalyu di wɔd dɛn 'anti-UV' ɔ 'UV resistant.' Fɔ ɔda prɔjek, di wan dɛn we de bay fɔ difayn di weta we dɛn nid, di tɛm we dɛn go ɛksplɔz, akseptabl kɔlɔ chenj, yɔlɔnɛs, haz ɔ layt-transmishɔn chenj ɛnitɛm we dɛn prɔpati ya impɔtant.

Ɔda savis layf kin difrɛn akɔdin to di say we yu de, di solar redyushɔn, instɔleshɔn angle, ɔpreshɔn tɛmpracha, kemikal ɛksplɔshɔn ɛn klin kɔndishɔn. If yu prɔjek nid fɔ gɛt difayn layf tɛm na do, gi di tɛst standad ɔ di pefɔmɛns rikwaymɛnt bifo yu pik di matirial.

Opshɔnal Fɔnkshɔn Surface Tritmɛnt dɛn

Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?

Polikabɔnɛt Film Data Sheet

Blister Polikabonayt Films Data Sheet.pdf

Pak & Delivri fɔ di wok

Polikabɔnɛt fim ɛn sheet matirial dɛn pak akɔdin to tik, rol ɔ sheet matirial fɔmat, sɔfayz rikwaymɛnt ɛn ɛkspɔt transpɔt kɔndishɔn. Protektiv pak de ɛp fɔ ridyus kɔntaminɛshɔn, skrach ɛn bɔdi damej we dɛn de kip ɛn ship.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt UV Resistant Polycarbonate Film

Wetin na UV resistant polycarbonate film?

UV resistant polycarbonate film na PC film gred we dɛn mek wit UV stebilizayshɔn, wan funkshɔnal UV-protɛktiv layt ɔ kɔtin fɔ impɔtant resistans to ɔltra vayolɛt ɛksplɔshɔn. I de kip di impak resistans ɛn prɔsesin advantej dɛn fɔ polycarbonate we i de gi bɛtɛ pefɔmɛns fɔ sɔm aplikeshɔn dɛn we dɛn dɔn pik we dɛn de yuz di san layt.

Yu tink se standad polycarbonate natin nɔ de mek i nɔ gɛt UV?

Polikabɔnɛt gɛt bɔku strɔng mɛkanikal ɛn ɔptik prɔpati dɛn, bɔt di gred dɛn we nɔ gɛt protɛkshɔn kin chenj afta we dɛn dɔn de na UV fɔ lɔng tɛm. So, di aplikeshɔn dɛn we de na do fɔ yuz wan gred we gɛt di rayt UV-stabilized ɔ UV-protected usay dɛn nid fɔ du wɛda pefɔmɛns.

Yu tink se dɛn kin yuz UV resistant polycarbonate film na do?

Yes, yu kin yuz fayn UV-resistant gred fɔ aplikeshɔn dɛn na do lɛk grafik ɔvlay, ikwipmɛnt lɛbl, panɛl ɛn protɛktiv kɔva. Dɛn fɔ pik di gred we fit akɔdin to di layf we dɛn nid fɔ liv na do, UV ɛksplɔshɔn, klaymat ɛn pefɔmɛns standad.

Us tik tik dɛn de?

di standad rεnj dεm we dεn list naw na lεk 0.25-0.5 mm fכ film εn 0.5-1.5 mm fכ sheet matirial . Ɔda tik dɛn kin de akɔdin to di gred, wit, sɔfa ɛn ɔda kwantiti we dɛn nid.

Wetin na di difrɛns bitwin polycarbonate film ɛn polycarbonate sheet matirial ?

Film jεnarali de tכk bכt tin, mכr fleksibul polikabכnayt mεtirial we dεn de sכpכt insay tin gej כ rol, we sheet matirial de tכk bכt tik mεtirial wit big rigiditi. HSQY de saplae ɔl tu di fɔmat dɛn dipen pan di aplikeshɔn ɛn di tik we dɛn nid.

Yu tink se dɛn kin print UV resistant PC film?

Yɛs, dɛn kin print gred dɛn we fit. Di say we dɛn kin print, di kɔtin ɛn di ink sistɛm fɔ kɔnfyus bifo dɛn prodyuz am, mɔ we di fim gɛt UV-rɛsistant ɔ skrach-rɛsistant fɛnshɔnal kɔtin.

Yu tink se dɛn kin mek di polikabɔnɛt fim we dɛn kɔl thermoformed?

Suitabl PC film gred dɛn kin thermoformed. Fɔmabiliti dipen pan tik, kɔtin, fɔm dip, ɔt kɔndishɔn ɛn di dizayn fɔ di kɔmpɔnɛnt we dɔn dɔn. Dɛn kin rikɔmɛnd fɔ mek dɛn tray fɔ mek fɔm fɔ di aplikeshɔn dɛn we rili impɔtant.

Yu tink se anti-skrat kɔtin de?

Anti-skratch surface tritmεnt kin bi saplae fכ sεlekt gred dεm. If abrasion resistance impɔtant, spɛsifa di aplikeshɔn we dɛn want ɛn di tɛst we dɛn nid so dat dɛn go ebul fɔ evaluate di aprɔpriet surface kɔnstrɔkshɔn.

Aw lɔng UV resistant polycarbonate film kin las na do?

Di layf we de na do de dipen pan di ɛksaktɔl UV-protɛkshɔn sistɛm, di say we di UV de, di tɛmpracha, di instɔleshɔn, di kemikal dɛn ɛn di we aw i fɔ luk. If dɛn nid fɔ gɛt wan patikyula savis layf, gi di wɛda standad ɛn akseptabl pefɔmɛns limit pas fɔ abop pan wan jenɛral diskripshɔn fɔ yuz na do.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi film ɔ sheet matirial fɔmat, tik, wit ɔ saiz, sɔfays tɛkstɔr, kɔlɔ, UV rikwaymɛnt, funkshɔnal kɔtin, printin ɔ fɔm we, aplikeshɔn, kwantiti ɛn ples fɔ go.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae polycarbonate film ɛn sheet matirial s fɔ global kɔnvɔta, industrial manifakta, printa, distribyushɔn ɛn OEM kɔstɔma dɛn. Di opshɔn dɛn we de inklud difrɛn tik, wit, kɔlɔ, sɔfa tɛkstɔr ɛn fɛnshɔnal sɔfa tritmɛnt fɔ prɔjek-spɛsifi k aplikeshɔn.

HSQY Plastik Grup Ɛgzibishin dɛn

Sɛtifiket dɛn we dɛn kin gi