Tekstur Polikarbonɛt Film fɔ Grafik Ɔvlay & Panɛl
HSQY textured polycarbonate film na fɔ grafik ɔvlay, kɔntrol panɛl, displei, protɛktiv kɔmpɔnɛnt ɛn industrial kɔnvɔshɔn aplikeshɔn dɛn we nid impak rɛsistɛns, dimɛnshɔnal stebiliti ɛn wan kɔntrol sɔfays apinans.
Polikabɔnɛt de kɔba mɛkanikal tafnɛs, ɔt rɛsistɛns ɛn gud dimɛnshɔnal stebiliti wit wan big rɛnj fɔ vijual finish. Dipen pan di gred we dɛn pik, di wan dɛn we de bay kin pik klia, mat, brɔsh, dayamɔn-patɛn ɔ ɔda tɛkstɔr sɔfays fɔ ajɔst difrɛn lɛvul dɛn fɔ transparency, glare kɔntrol ɛn taktil apinans.
Standart film tiknes de frɔm 0.25mm to 0.5mm, we sheet matirial opshɔn dɛn de frɔm 0.5mm to 1.5mm. Natural ɛn kɔstɔmayt kɔlɔ dɛn kin tɔk bɔt akɔdin to di surface finish, aplikeshɔn ɛn ɔda kwantiti.
![Klia polikabɔnɛt film]()
Klia
![Mat polikarbonɛt film surface]()
Mat
![Tekstur polikarbonat film surface]()
Tekstur we dɛn mek
Tekstur Polikarbonɛt Film Spɛsifikeshɔn dɛn
| Prɔpati |
Spɛsifikeshɔn |
| Sɔntin |
Tekstur Polycarbonate shit Fim we gɛt di taytul |
| Tin dɛn |
Polikabɔnɛt (PC) . |
| Film Tiknɛs |
0,25mm - 0,5 mm |
| Tiknɛs fɔ di Shit |
0,5mm - 1,5mm we yu de yuz |
| Di Fim Width |
930mm / 1220mm na di wan |
| Di Shit Width |
915mm / 1000mm na wan |
| Kɔlɔ |
Natural / Customized we dɛn mek |
| Di Opshɔn dɛn fɔ di Surface we dɛn dɔn list |
Polish/Polish, Polish/Brush, Polish/Daymɔnd |
| Ɔda Sɔfays Opshɔn dɛn |
Mat ɛn ɔda tɛkstɔr sɔfays dɛn we de ɔnda gred ɛn prodakshɔn kɔnfɔmeshɔn |
| Posisibul Prɔses |
Print, day kɔt, panch, ɛmbos, bɛnd ɛn thermoforming dipen pan gred ɛn sɔfays |
| Tipik Aplikeshɔn dɛn |
Grafik ɔvlay, kɔntrol panɛl, protɛktiv panɛl, layt-mɛnejmɛnt kɔmpɔnɛnt, protɛktiv ɛlmɛt, blista prodak ɛn pak kɔmpɔnɛnt |
Surface Note: Di ekzak tɛkstɔr, glos lɛvɛl, transparency ɛn prɔsesin pefɔmɛns dipen pan di PC gred ɛn surface kɔmbayn we yu dɔn pik. If yu prɔjek nid fɔ gɛt difayn sɔfays rɔf, glos valyu, haz, tɛkstɔr kɔd ɔ kɔmparabl matirial gred, put da infɔmeshɔn de insay yu kwɛstyɔn.
Wetin Na Tekschɔ Polikabɔnɛt Fim?
Tekstured polycarbonate film na PC film wit wan kontrכl surface patεn כ mat finish we de chenj di matirial in vijual apinans, riflεkt glare, taktil fil εn surface intarakshכn kכmpεr wit wan ful polish film.
Yu kin put di tɛkstɔr na wan say we di ɔda say kin stil polish ɔ yuz difrɛn finish. Dis de mek dizayna dɛn ebul fɔ jɔyn wan dɛkɔretiv ɔ low-glare frɔnt sɔfays wit wan riya surface we dɛn pik fɔ print, bon ɔ ɔda kɔnvɔyt prɔses.
Fɔ grafik ɔvlay ɛn kɔntrol intafɛs, dɛn fɔ pik di kɔrɛkt sɔfays togɛda wit di tin dɛn we dɛn nid fɔ print, di displei-windo klia, baklayt, taktil apinans ɛn di kɔndishɔn dɛn we dɛn de ɛkspɛkt fɔ handle.
Klia vs. Mat vs. Tekstur Polikabonayt Film
| Surface Type |
Visual Karakta |
Tipik Yuz |
| Klia / Polish |
Smɔl surface wit ay vijual klia |
Displei winda, transparent kɔva ɛn print transparent kɔmpɔnɛnt dɛn |
| Mat |
Ridyus dairekt riflεkshɔn ɛn sɔft apinans |
Kontrol panɛl, grafik ɔvlay ɛn industrial intafɛs |
| Tekstur we dɛn mek |
Kontrol taktil ɛn vijual tɛkstɔr |
Grafik ɔvlay, panɛl, lɛbl ɛn dɛkɔretiv industrial kɔmpɔnɛnt dɛn |
| Dɛn bin brus am |
Direkshɔnal dɛkɔretiv patɛn |
Dekorativ panɛl, aplayans intafɛs ɛn spɛshal grafik dɛn |
| Daymɔnd Pɔtn we dɛn mek |
Patna apinans wit chenj layt riflεkshɔn |
Dekorativ panɛl, layt-mɛnejmɛnt pat ɛn spɛshal kɔmpɔnɛnt dɛn |
Benefits of wan Tekstur PC Surface
- Ridyus glare: Mat ɛn tɛkstɔr sɔfays kin ridyus dairekt riflɛkshɔn we yu kɔmpia am wit sɔfays we polish bad bad wan.
- Di we aw dɛn kin kɔntrol am: Difrɛn tɛkstɔr dɛn kin mek dizayna dɛn ebul fɔ mek wan patikyula tin we dɛn kin si ɛn we dɛn kin tɔch.
- Surface wear appearance: Sɔm tɛkstɔr kin mek smɔl handlin mak dɛn nɔ kin si bɛtɛ pas surface dɛn we dɛn polish bad bad wan.
- Printin fleksibiliti: Dɛn kin evalyu di rayt gred fɔ skrin printin ɛn ɔda industrial grafik prɔses.
- Mekanikal tafnɛs: Polikabɔnɛt de gi strɔng impak rɛsistɛns fɔ dimand industrial kɔmpɔnɛnt dɛn.
- Dimɛnshɔnal stebiliti: I fayn fɔ prɛsishɔn ɔvlay, panɛl ɛn kɔnvɔyt kɔmpɔnɛnt dɛn.
- Hɛt resistans: PC de gi yusful tɛmal pefɔmɛns fɔ ilɛktronik ɛn industrial aplikeshɔn dɛn.
- Kastom apinans: Kɔlɔ, sɔfays tɛkstɔr, tik ɛn dimɛnshɔn kin mach to kwalifay B2B prɔjek dɛn.
Tekstur PC Film fɔ Grafik Ɔvlay
Grafik ɔvlay na wan pan di men aplikeshɔn fɔ tɛkstɔr polikabɔnɛt fim. Wan tɛkstɔr frɔnt sɔfays kin gi wan lɔwa-glare intafɛs ɛn wan difrɛn taktil apinans, we di riya sayd kin pik akɔdin to di printin ɛn asɛmbli we.
Fɔ ɔvlay dɛn we gɛt displei winda dɛn, yu fɔ tek tɛm pik di sɔfays kɔnfigyushɔn. Wan ebi tɛkstɔr akɔdin to di displei eria kin mek di haz bɔku ɛn ridyus di klia we aw pɔsin kin si, so di prɔjek dɛn kin nid fɔ pik klia winda, difrɛn tɛkstɔr ɔ ɔda kɔnstrɔkshɔn akɔdin to di intafɛs dizayn we dɔn dɔn.
| Ɔvlay Rikwaymɛnt |
Wetin fɔ Kɔnfɔm |
| Front Surface we de bifo |
Mat, tɛkstɔr, brush ɔ ɔda tin we dɛn nid fɔ mek wit taktil |
| Displei Window |
Transparency, haze ɛn surface kondishɔn we dɛn nid oba di displei eria |
| Fɔ print |
Printin we, ink sistem ɛn print sayd |
| Baklayt we dɛn kin yuz |
Layt sɔs, simbul dɛn we gɛt layt ɛn we dɛn nid fɔ apia we dɛn layt am |
| Embossing we dɛn de yuz |
Embossed keys, domes ɔ taktil ficha dɛn if nid de |
| Day Kɔt we dɛn de kɔt |
Finish dimɛnshɔn, ol, slot ɛn dimɛnshɔnal tolɛreshɔn |
Printin pan Tekstur Polikabɔnɛt Film
Yu kin yuz fayn polycarbonate film gred fɔ multi-layer grafik ɛn industrial printin. Print pefɔmans dipen pan di ɛksaktɔl sɔfays strɔkchɔ, ink kemistri, curing method ɛn if dɛn aplay grafik to di fɔs ɔ sɛkɔn surface.
Sɛkɔn-sɔfas printin na tin we dɛn kin tink bɔt fɔ transparent ɔvlay kɔnstrɔkshɔn bikɔs di grafik dɛn we dɛn print kin posishun biɛn di PC fim. Dis kin ɛp fɔ ayd di ink layt frɔm dairekt kɔntakt we dɛn de handle nɔmal wan.
Bifo mas prodakshɔn, di wan dɛn we de bay fɔ tɛst ink adheshon, curing, kala apinans, rejista ɛn ɛni ɔda fɔm ɔ ɛmbos prɔses we de afta dat yuz di aktual PC gred.
Tekstur Polikarbonɛt Film fɔ Kɔntrol Panɛl dɛn
Bɔku tɛm, di industri ɛn aplayans kɔntrol panɛl dɛn kin nid fɔ gɛt kɔmbayn grafik, lɔw glare, taktil apinans ɛn mɛkanikal durabiliti. Tekstur polycarbonate film kin gi wan funkshonal frɔnt surface we i de stil fit fɔ print ɛn daunstrim kɔnvɔshɔn we dɛn pik di aprɔpriet gred.
Fɔ intafɛs dɛn we dɛn kin handle bɔku tɛm, di wan dɛn we de bay fɔ difayn sɛpret di tin dɛn we dɛn nid fɔ abrashɔn, skrach rɛsistɛns ɛn kemikal klin. Wan tɛkstɔr sɔfays nɔmɔ nɔ fɔ tek am ɔtomɛtik wan fɔ gi di sem pefɔmɛns lɛk wan dediket had-kɔt PC fim.
Tekstur film vs. Had-Kɔt Polikabɔnɛt Film
| Ficha |
Tekstur PC Film |
Had-Kot PC Film |
| Men Pɔpɔshɔn |
Surface apinans, glare kɔntrol ɛn taktil tɛkstɔr |
Ɛnhans skrach, abrashɔn ɔ kemikal rɛsistɛns dipen pan kɔtin |
| Di we aw di wɔl de luk |
Mat, brush, patɛn ɔ ɔda tɛkstɔr finish |
I kin klia ɔ tɛkstɔr dipen pan di kɔtin sistɛm |
| Skrat Resistans fɔ mek yu nɔ ebul fɔ waka |
Dipen pan bays matirial ɛn tɛkstɔr |
Disain fɔ ɛnhans sɔfays rɛsistɛns akɔdin to kɔtin gred |
| Di Tipik Yuz |
Ɔvlay, panɛl, lɛbl ɛn intafɛs |
Winda dɛn we gɛt ay tɔch, panɛl dɛn we de protɛkt ɛn intafɛs dɛn we de aks fɔ |
Day Kɔt, Ɛmbos ɛn Fɔm
Suitabl PC film gred dɛn kin day-kat, panch, ɛmbos, bɛn ɔ thermoformed insay finish komponent dɛn. Prɔsɛsin pefɔmɛns dipen pan di film tiknes, sɔfays tɛkstɔr, pat jɔyometri ɛn di ɛksaktɔ rɛsin gred.
If wan grafik ɔvlay inklud ɛmbos ki, rayz dome ɔ fɔm eria, di sɔfayz apinɛns ɛn print grafik dɛn fɔ evalyu afta fɔm bikɔs lokal strɛch kin chenj di tɛkstɔr ɛn optik apinans.
Aplikeshɔn dɛn fɔ Tekstɔr Polikabɔnɛt Film
![Tekstured polycarbonate film fɔ kɔntrol panɛl dɛn]()
Panɛl & Intafɛs dɛn
![Tekstured polycarbonate film fɔ layt difyuza aplikeshɔn dɛn]()
Layt Manejmɛnt Kɔmpɔnɛnt dɛn
| Aplikeshɔn |
Tipik Rikwaymɛnt |
| Grafik Ɔvlayz dɛn |
Kontrol tɛkstɔr, lɔw glare, printin ɛn day kɔt |
| Kɔntrol Panel dɛn |
Taktil apinans, grafik, dimɛnshɔnal stebiliti ɛn durabiliti |
| Membran Switch Ɔvlay dɛn |
Printin, ɛmbos, day kɔt ɛn intafɛs apinans |
| Panɛl dɛn we dɛn kin yuz fɔ dekɔret |
Kastom patɛn, kɔlɔ ɛn sɔfays apinɛns |
| Layt Manejmɛnt Pat dɛn |
Kontrol surface strɔkchɔ ɛn optik apinans akɔdin to dizayn |
| Komponent dɛn we de protɛkt pɔsin |
Impekt resistans ɛn dimɛnshɔnal stebiliti |
| Blister / Fɔm Prodakt dɛn |
Fɔmabiliti, sɔfayz apinɛns ɛn tafnɛs |
| Di Komponent dɛn fɔ Pak |
Dekorativ apinans ɛn mɛkanikal protɛkshɔn |
Aw fɔ Pik di Rayt Surface Texture
Di kɔrɛkt tɛkstɔr dipen pan di tin we dɛn dɔn mek pas di we aw i tan nɔmɔ. Di wan dɛn we de bay fɔ evalyu aw di sɔfa de afɛkt di we aw pɔsin de si, di glare, print, tɔch, baklayt ɛn di prɔsesin we de dɔŋ di wata.
| Projek Rikwaymɛnt |
Sɛlɛkshɔn Kɔnsidɛreshɔn |
| Display Visibiliti fɔ si |
Yuz wan say we de gi di klia we aw dɛn nid ɛn di haz we dɛn go gri wit |
| Glare Ridɔkshɔn |
Mat ɔ tɛkstɔr sɔfays kin ridyus dairekt riflɛkt layt |
| Taktil Fil we yu de fil |
Selekt tɛkstɔr dip ɛn pɔtn akɔdin to intafɛs dizayn |
| Fɔ print |
Kɔnfɛm printabl sayd, ink sistɛm ɛn sɔfays kɔmpitibliti |
| Baklayt we dɛn kin yuz |
Evaluate haze, diffusion ɛn apinans ova eria dɛn we gɛt layt |
| Wear Resistans fɔ wɛr |
Difayn abrashɔn ɔ skrach rikwaymɛnt dɛn sɛpret usay i impɔtant |
| Fɔm fɔm |
Kɔnfɛm se tɛkstɔr de kɔntinyu fɔ akseptabl afta yu dɔn ɛmbos ɔ thermoforming |
Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?
| Rikwaymɛnt |
Infɔmeshɔn fɔ Gi |
| Aplay fɔm |
Grafik ɔvlay, panɛl, mɛmbran switch, layt-mɛnejmɛnt pat, pak ɔ ɔda yus |
| Film / Sheet we de na di wɔl |
Fɔmat fɔ saplae we dɛn nid |
| Tik we i tik |
Rikwayd nominal tik ɛn tolɛreshɔn |
| Width / Sayz we yu de yuz |
Rol wit ɔ sheet matirial dimɛnshɔn dɛn |
| Sho |
Polish, mat, brush, dayamɔn ɔ ɔda tɛkstɔr |
| Kɔlɔ |
Natural ɔ kɔstɔm kɔlɔ rikwaymɛnt |
| Optik Rikwaymɛnt |
Transparency, haze, gloss ɔ displei-window rikwaymɛnt usay i apɔynt |
| Fɔ print |
Printin we, ink sistem ɛn print sayd |
| Di we aw dɛn de du di wok |
Day kɔt, panch, ɛmbos, bɛnd ɔ thermoforming |
| Speshal Pɔfɔmɛnshɔn |
Skrach, abrashɔn, kemikal, flaym ɔ UV rikwaymɛnt dɛn if i apɔynt |
| Ɔmɔs |
Sampul kwantiti, trayal ɔda, rɛgyula ɔda ɛn ɛstimat ɛni ia dimand |
Rilat Polikabɔnɛt Film Data Sheet
Dɛn kip di PDF we de dɔŋ ya frɔm di ɔrijinal prɔdak pej. Kɔnfɛm di aplikebul tɛknikal data sheet matirial fɔ di ɛksaktɔ tɛkstɔr PC fim gred bifo yu yuz ɛni valyu fɔ injinɛri aprɔval.
![Polikabɔnɛt fim data sheet matirial dawnlod]()
Blister Polikabonayt Films Data Sheet.pdf
Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt tɛkstɔr polikabɔnɛt fim
Wetin na tɛkstɔr polikabɔnɛt fim?
Tekschɔd polycarbonate film na PC film wit wan kɔntrol mat, brush, patɛn ɔ ɔda surface finish we dɛn mek fɔ chenj glare, apinans ɛn taktil fil kɔmpia wit wan ful polished film.
Us tik tik dɛn de?
Di kɔrɛnt prodakt spɛsifikɛshɔn de list fim frɔm 0.25mm to 0.5mm ɛn sheet matirial frɔm 0.5mm to 1.5mm.
Us wayd dɛn de?
Standart film widths na 930mm ɛn 1220mm. Standart sheet matirial widths na 915mm ɛn 1000mm.
Us sɔfayz tɛkstɔr dɛn de?
Di kɔrɛnt ditayl spɛsifikɛshɔn de list polish/pɔlish, polish/brɔsh ɛn polish/daymɔnd sɔfays dɛn. Mat ɛn ɔda tɛkstɔr vayriɔnt dɛn kin tɔk bɔt akɔdin to di gred we dɛn nid ɛn di prodakshɔn spɛsifikɛshɔn.
Wetin na di difrɛns bitwin mat ɛn tɛkstɔr PC fim?
Mat jεnarali de dεskrεb wan lכw-glos sכfayz apinεns, we tεkschur film kin gεt mכr difayn sכfayz patεn כ taktil strכkchכ. Di tu wɔd dɛn kin ɔvalap dipen pan di gred ɛn di wan we mek am.
Yu tink se dɛn kin print polikabɔnɛt fim we gɛt tɛkstɔr?
Dɛn kin ebul fɔ evalyu di rayt PC gred fɔ industrial printin ɛn grafik ɔvlay. Print pefɔmans dipen pan di say we yu dɔn pik, ink sistem, di we aw yu de mɛn ɛn di sayd we yu de print, so i fayn fɔ mek yu tɛst di prodakshɔn.
Yu tink se dɛn kin yuz tɛkstɔr PC fim fɔ grafik ɔvlay?
Yɛs. Tekstur PC film na tin we dɛn kin tink bɔt fɔ grafik ɔvlay ɛn kɔntrol intafɛs usay dɛn nid fɔ ridyus glare, taktil apinans, printin ɛn mɛkanikal durabiliti.
Yu tink se dɛn kin day-kat di fim ɔ dɛn kin ɛmbos am?
Di gred dɛn we fit kin bi day-kat, panch ɔ ɛmbos. Di tiknes, tɛkstɔr, dimɛnshɔn ɛn ɛmbos jɔyometri we dɛn nid fɔ tɛst bifo mas prodakshɔn.
Yu tink se tɛkstɔr polikabɔnɛt fim nɔ de skrach?
Wan tin we gɛt tɛkstɔr kin mek smɔl smɔl we dɛn nɔ de si igen, bɔt dɛn nɔ fɔ trit am ɔtomɛtik wan lɛk fim we gɛt had kɔt we nɔ de skrach. If wan difayn abrashɔn ɔ skrach rikwaymɛnt nid, spɛsifa di tɛst we ɛn di target pefɔmɛns.
Yu tink se yu kin yuz tɛkstɔr PC fim oba LED ɔ baklit eria dɛn?
Yes, dɛn kin evalyu sɔm tɛkstɔr fim dɛn we dɛn dɔn pik fɔ baklit intafɛs. Surface texture de afɛkt haze, diffusion ɛn braytnɛs, so i fayn fɔ tɛst wit di aktual LED layout.
Yu kin kɔstɔmayt di kɔlɔ?
Dɛn kin tɔk bɔt di kɔlɔ dɛn we dɛn dɔn kɔstɔmayt akɔdin to di say we dɛn nid, di tik ɛn di kwantiti we dɛn ɔda. Faynal kɔlɔ fɔ apruv yuz prodakshɔn sampul usay di apinɛns impɔtant.
Us infɔmeshɔn a fɔ gi fɔ kot?
Duya gi di aplikeshɔn, tiknes, wit ɔ dimɛnshɔn, sɔfays tɛkstɔr we yu nid, kɔlɔ, transparency rikwaymɛnt, printin prɔses, kɔnvɔyt we, spɛshal pefɔmɛns rikwaymɛnt, ɔda kwantiti ɛn dɛstineshɔn.
Pak & Delivri fɔ di wok
Tekstur polycarbonate film ɛn sheet matirial dɛn pak akɔdin to tik, sɔfa, dimɛnshɔn ɛn ɛkspɔt transpɔt rikwaymɛnt. Surface protection impɔtant mɔ fɔ dɛkɔretiv ɛn print aplikeshɔn usay kɔntaminɛshɔn ɔ handel damej kin afɛkt di finished apinans.
![Tekstur polycarbonate film protektiv pakej]()
Pakɛj we de protɛkt pɔsin
![Tekstur PC film ekspot pak]()
Ɛkspɔt Pak
![Tekstur polikarbonat film shipment pakej]()
Shipment Packaging we dɛn kin yuz fɔ mek tin dɛn
Sɛtifiket dɛn we dɛn kin gi
Bɔt HSQY Plastik Grup
HSQY Plastik Grup de saplae polycarbonate film ɛn funkshɔnal plastic matirial fɔ grafik-ɔvlay manifakta, printa, ilɛktronik kɔmni, kɔnvɔta, distribyushɔn ɛn OEM kɔstɔma dɛn. Difrɛn film tiknes, sɔfayz tɛkstɔr, kɔlɔ ɛn projɛkt-spɛsifi k spɛsifikɛshɔn dɛn kin tɔk bɔt fɔ B2B aplikeshɔn dɛn.
![HSQY Plastic Group intanashɔnal ɛgzibishin dɛn]()
HSQY Plastic Group de mit di glob ɔl bayer, kɔnvɔta ɛn industri patna dɛn na intanashɔnal ɛgzibishin.
