Faya-Rɛtardant Kɔlɔ PVC fom bod

Faya-Rɛtardant Kɔlɔ PVC fom bod

HSQY faya-retardant kala PVC fom bod na laytwɛt rigid sɛlular PVC sheet matirial we de insay wayt, rɛd, yɔlɔ, blu, grɛn, blak ɛn kɔstɔmayz kɔlɔ fɔ sayn, displei, intɛriɔ panɛl, patishɔn, fɔnicha ɛn jenɛral fabrikeshɔn.

di kכrant rεnj de kכba tiknes frכm 1mm to 35mm, dεnsiti frכm 0.35 to 1.0g/cm³ ɛn sɔm standad sheet matirial fɔmat dɛn we inklud 1220×2440mm, 915×1830mm, 1560×3050mm ɛn 2050×3050mm. Glossy ɛn mat surface opshɔn dɛn de na di list.

Di HSQY rεfrεns data we de naw de dεskrεb di bכd se i de sεlf-εkstεshכn insay less dan 5 sεkכnd. Bikɔs dɛn nɔ tɔk ɛni faya-tɛst standad ɔ klasifikeshɔn na di tɛknikal tebul we dɛn dɔn gi, di prɔjek dɛn we nid fɔ gɛt wan spɛsifikɛd UL, EN, DIN, BS ɔ ɔda flaym-pɔfɔmɛnshɔn klasifikeshɔn fɔ kɔnfɔm di aplikebul SGS tɛst ripɔt fɔ di ɛksaktɔl kɔlɔ, tiknɛs ɛn dɛnsiti.

Faya-Rɛtardant PVC fom bod Spɛsifikeshɔn dɛn

PVC fom bod Fizik Prɔpati dɛn

Test Data Notis: Dɛn kip di valyu dɛn we de ɔp frɔm di HSQY prodak data we de naw. Di pej we dɛn gi nɔ de sho di tɛst standad, di tik we di spɛshal tik, di we aw dɛn de kondishɔn ɔ di kɔndishɔn na di lɛbɔraytri fɔ ɛvri valyu. Projɛkt dɛn we gɛt mandatory mɛkanikal ɔ faya-perfɔmans spɛsifikɛshɔn fɔ aks fɔ di kɔrɛspɔndɛns tɛst ripɔt fɔ di ɛksaktɔl bɔd gred.

Ɔndastand Faya-Rɛtadant PVC fom bod

PVC fom bod na wan sɛlular rigid PVC matirial. Di HSQY rεfrεns data we de naw de dεskrεb dis prכdak as sεlf-extinguish in less dan fayv sεkכnd.

Fɔ profeshɔnal kɔnstrɔkshɔn, transpɔt, ɛgzibishin ɔ pɔblik-spɛs aplikeshɔn, di diskripshɔn 'sɛlf-ɛkstinguish' nɔ fɔ trit as sɔbstityuyt fɔ faya klasifikeshɔn we dɛn no. Test standad kin evaluate difren paramita inklud flame spred, afta flame taim, smok prodakshon en flaming droplets.

So di wan dɛn we de bay fɔ no di faya standad we dɛn nid fɔs ɛn afta dat dɛn fɔ kɔnfɔm if di bɔd kɔlɔ, tik ɛn dɛnsiti we dɛn dɔn pik gɛt di kɔrɛspɔndɛns tɛst ripɔt.

Wetin Mek Kɔlɔ, Tiknɛs & Gred Mat fɔ Faya Pɔfɔmɛnshɔn

Faya klasifikeshɔn fɔ bi evaluate fɔ di aktual saplai prodak pas fɔ asum frɔm di jenɛral tɛm PVC fom bɔd.

difrεn fכmyuleshכn dεm, pigmεnt dεm, dεnsiti rεnj dεm, bod tiknes dεm εn sכfayz kכnstrכkshכn dεm kin afekt di tεst risכlt dεm. Wan sɛtifiket fɔ wan wayt 5mm sheet matirial , fɔ ɛgzampul, nɔ fɔ tek am ɔtomɛtik wan fɔ kɔba ɛvri 20mm bod we gɛt kɔlɔ pas di tɛst skɔp se i de kɔba.

Kɔlɔ PVC fom bod Opshɔn dɛn

HSQY de list wayt, rɛd, yɔlɔ, blu, grɛn ɛn blak as standad kɔlɔ dairekshɔn, wit kɔstɔmayt kɔlɔ dɛn we de fɔ kwalifay prɔjek dɛn.

Fɔ prɔjek dɛn usay kɔlɔ kɔnsistɛns impɔtant, di wan dɛn we de bay fɔ apruv wan ripɔt sampul ɛn difayn akseptabl kɔlɔ tolɛreshɔn bifo bɔku prodakshɔn.

1-35mm PVC fom bod Tiknɛs Rɛnj

Di HSQY rεnj we de naw de kɔba lɛk 1mm to 35mm. Tiknes fɔ pik akɔdin to di panɛl saiz we dɔn dɔn, sɔpɔt spɛshal, rigiditi we dɛn nid, di we aw dɛn mek am ɛn aw fɔ yuz am.

Tinna bod kin tink bɔt fɔ laytwɛt grafik, displei ɛn fabricated kɔmpɔnɛnt, we tik bod kin gi inkris sɛkshɔn stiffness fɔ fɔnicha, patishɔn ɛn fabricated panɛl.

Faynal bod rigiditi de dipen bak pan density, so tiknes nɔ fɔ evaluate indipɛndɛnt frɔm di selekt fom density.

PVC fom bod Densiti frɔm 0.35 to 1.0g/cm³

Densiti de inflɔws di bod wet, rigiditi, skru holdin, edj trɛnk ɛn mashin bihayvya. HSQY naw de list wan densiti rεnj we de fכ 0.35-1.0g/cm³.

So di wan dɛn we de bay fɔ sho di density we dɛn nid instead fɔ ɔda jɔs bay tik. Tu PVC fom bod dεm we gεt di sem tik kin gεt notis difrεnt wet εn mεkanikal bihayvya we dεn dεnsiti difrεn.

Standart & Kastɔm ​​Shit Sayz dɛn

Di standad saiz opshɔn dɛn we de naw inklud 1220×2440mm, 915×1830mm, 1560×3050mm ɛn 2050×3050mm, wit kɔstɔmayz saiz dɛn we dɛn dɔn list bak.

Big-fɔmat bayer dɛn fɔ kɔnfɔm tiknɛs tolɛreshɔn, wit ɛn lɔng tolɛreshɔn, flatnɛs ɛn palet kɔnfigyushɔn bikɔs dɛn paramita ya kin afɛkt CNC prɔsesin, printin, laminɛshɔn ɛn shiping efyushɔn.

Glossy & Matte Surface Opshɔn dɛn

Glossy ɛn mat surface dɛn de na di list insay di HSQY spɛsifikɛshɔn we de naw. Surface selekshɔn fɔ mach di downstream prɔses ɛn rikwayd visual appearance.

Fɔ dairekt dijital printin, skrin printin ɔ laminɛshɔn, di wan dɛn we de bay fɔ evalyu di sɔfa smol smol, ink ɔ adhesive kɔmpitibiliti ɛn ɛni sɔfa tritmɛnt we dɛn nid we dɛn de yuz di prodakshɔn prɔses we dɛn want.

PVC fom bod fɔ Print & Sayn

Di sɛlular kɔnstrɔkshɔn ɛn smol sɔfa de mek PVC fom bɔd na kɔmɔn sabstret fɔ sayn, advatayzmɛnt panɛl, ɛgzibishin grafik ɛn ɔda vijual kɔmyunikeshɔn aplikeshɔn dɛn.

Tipik prɔsesin kin inklud skrin printin, kɔmpitabl dijital printin, lɛta, routin, engraving ɛn lamination. Dɛn fɔ tɛst di prodakshɔn sɛmpul dɛn wit di aktual printa, ink, adhesive ɔ finishing sistem bifo dɛn mek big print program.

PVC fom bod fɔ Displei & Ɛgzibishin

Yu kin yuz kala PVC fom bod fɔ ɛgzibishin displei, POS/POP strɔkchɔ, dɛkɔretiv lɛta, branded panɛl ɛn booth kɔmpɔnɛnt usay laytwɛt rigid sheet matirial kɔnstrɔkshɔn yusful.

If wan tred-sho venyu ɔ pɔblik bildin spɛsifa wan mandatory flame-performance klasification, gi da ɛksaktɔl standad we yu de aks fɔ di bɔd. Nɔ jɔs abop pan wan jenɛral diskripshɔn we de kil yusɛf.

PVC fom bod fɔ Intɛriɔ Patishɔn dɛn

Intɛriɔ patishɔn panɛl ɛn dɛkɔretiv bod dɛn de insay di HSQY aplikeshɔn dairekshɔn dɛn we de naw.

Fɔ akitɔk ɔ pɔblik-spɛs instɔleshɔn, dɛn fɔ pik di bod tik ɛn dɛnsiti akɔdin to di panɛl dimɛnshɔn ɛn sɔpɔt kɔndishɔn, we ɛni mandatory bildin faya klasifikeshɔn fɔ kɔnfɔm indipɛndɛnt frɔm di jenɛral prodak diskrɔpshɔn.

PVC fom bod fɔ Fɛnichɔ & Kabinɛt

Di ɔrijinal prodak infɔmeshɔn inklud kichin kabinɛt, wasrum kabinɛt ɛn fɔnicha aplikeshɔn.

Di wan dɛn we de bay fɔnicha fɔ spɛsifa di density, tiknes, surface rikwaymɛnt, ed mashin, skru-hold nid ɛn lamination rikwaymɛnt. Dɛn kin lɛk fɔ yuz bɔd we gɛt ay density usay dɛn nid fɔ gɛt mɔ rigiditi ɔ fɔ mek i fast.

Wata Absɔpshɔn & Wet-Eria Yuz

Kɔrɛnt HSQY tɛst data list wata absɔpshɔn na ≤1.5%. Dis de sɔpɔt aplikeshɔn usay rɛsistɛns to nɔmal mɔstɔ ɛksplɔshɔn yusful.

Di valyu we dɛn dɔn pablish nɔ fɔ rayt bak as ziro wata absɔpshɔn. Fɔ wasrum, kabinɛt ɔ ɔda humid ɛnvayrɔmɛnt, jɔyn, edj dɛn we de na do, fastɛns ɛn di kɔmplit instɔleshɔn fɔ disayn bak fɔ di savis kɔndishɔn dɛn we dɛn want.

Kεmikכl & Kכrכshכn Resistεns

Di HSQY prodakt diskripshɔn we de naw de rɛfrɛns kɔrɛshɔn rɛsistɛns ɛn kemikal anti-kɔrɛshɔn aplikeshɔn dɛn.

di kεmikכl rεsistεns de difrεn akɔdin to di kεmikכl, kכnsantreshכn, tεmprachכ εn di tεm we dεn de εkspos. Di wan dɛn we de bay we de yuz di bod nia asid, alkali, klin, sɔlvɛnt ɔ industrial kemikal fɔ gi di patikyula kemikal ɛnvayrɔmɛnt fɔ kɔnfyus di kɔmpatibiliti.

Aplikeshɔn dɛn we dɛn kin yuz na do, dɛn nid fɔ kɔnfɔm di gred

Di bod dɛn we de na do na di wɔl ɛn di advatayzmɛnt we dɛn kin advatayz na do, dɛn dɔn put dɛn pan di ɔrijinal aplikeshɔn dairekshɔn dɛn, bɔt di wok we faya nɔ de du nɔmɔ nɔ de mek pɔsin ebul fɔ du di wɛda we de na do fɔ lɔng tɛm.

Di prɔjek dɛn we de na do fɔ kɔnfɔm UV stebilizayshɔn, di we aw dɛn de op fɔ di kɔlɔ-fayd, di data bɔt di wɛda, di tɛmal ɛkspɛnshɔn ɛn di warranty we de na do if nid de.

PVC fom bod Fabrikɛshɔn

Di ɔrijinal HSQY pej de sho se di matirial fit fɔ bɔku bɔku we dɛn fɔ mek am.

• Saw we dɛn de kɔt

• CNC routin we yu de yuz

• Fɔ drɔl

• Fɔ panch

• Die cutting fɔ di rayt tiknes

• Sandin

• Fɔ mek tin dɛn we dɛn rayt

• Skru we yu de skru

• Nailing

• Rivetin we de mek pɔsin rivet

• Bonding wit kompitibul adhesive sistem

Tul, kɔt spid ɛn fasten we fɔ pik akɔdin to di bod tik ɛn density. Test fabrication pan wan ripɔt prodakshɔn sampul usay edj kwaliti ɔ dimɛnshɔnal akkuracy impɔtant.

PVC fom bod Aplikeshɔn dɛn

Faya-Retardant Kɔlɔ Bɔd vs. Jɛnɛral PVC fom bod

Aw fɔ Spɛsifik Faya-Rɛtardant PVC fom bod

Infɔmeshɔn Nid fɔ wan PVC fom bod Kɔt

• Tik we dɛn nid

• Density we dɛn nid

• Wid ɛn lɔng we dɛn nid

• Wait, blak, rɛd, yɔlɔ, blu, grɛn ɔ kɔstɔm kɔlɔ

• Glossy ɔ mat surface

• Rikwayd faya-tɛst standad ɛn klasification

• Print, routing, engraving ɔ fabrication rikwaymɛnt dɛn

• Yuz insay os ɔ na do

• Di we aw dɛn nid fɔ pak di tin dɛn

• Ɔda kwantiti

• Di kɔntri we dɛn de go ɛn di pɔt

Teknik Data Sheet we dɛn de yuz

Di prodak pej we de naw inklud wan SGS dɔkyumɛnt fɔ PVC fom bɔd. Di wan dɛn we de bay we nid faya-pɔfɔmɛnshɔn pruf fɔ chɛk di bɔd gred we dɛn dɔn tɛst, tiknɛs, kɔlɔ, tɛst standad ɛn di klasification we dɛn ripɔt insay di dɔkyumɛnt we dɛn de yuz.

Pak, MOQ & Delivri

Sɛtifiket Dokumɛnt dɛn

HSQY de sho setifikeshɔn dɔkyumentri wit in PVC fom bod prodak dɛm. Di wan dɛn we de bay fɔ kɔnfɔm se di ripɔt we dɛn nid de aplay to di ɛksaktɔl tik we di bɔd tik, di density, di kɔlɔ ɛn di aplikeshɔn we de insay di ɔda.

HSQY Ɛgzibishin Aylayt dɛn

HSQY de tek pat pan intanashɔnal ɛgzibishin fɔ mit distribyushɔn, impɔta, sayn-matirial bayer, fɔnicha manifakta ɛn plastic- sheet matirial kɔstɔma dɛn.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt faya-retardant PVC fom bod

Wetin na kala PVC fom bod?

Kɔlɔ PVC fom bod na laytwɛt rigid sɛlular PVC sheet matirial we de insay difrɛn kɔlɔ ɛn tik fɔ sayn, displei, patishɔn, fɔnicha ɛn fabrik kɔmpɔnɛnt dɛn.

Dis PVC fom bod faya retardant?

Di HSQY fizik-prɔpati tebul we de naw de tɔk bɔt di bɔd se i de kil insɛf insay lɛs pas fayv sɛkɔn. Dɛn nɔ tɔk bɔt wan patikyula intanashɔnal faya klasifikeshɔn na da tebul de, so di prɔjek dɛn we dɛn dɔn rigul fɔ kɔnfɔm di tɛst ripɔt we dɛn nid apat.

Yu tink se fɔ kil yusɛf min UL 94 V-0?

Nɔ, diskripshɔn we de kil insɛf nɔ fɔ chenj ɔtomɛtik to UL 94 V-0 ɔ ɔda klasification. UL, EN, DIN ɛn BS standad dɛn de yuz difayn tɛst prosidyuz ɛn klasifikeshɔn dɛn.

Di faya rɛytin kin chenj wit di kɔlɔ ɔ tik?

I kin ebul. Fɔmyulashɔn, pigmɛnt, tik, dens ɛn bod gred kin afɛkt di tɛst rizɔlt. Kɔnfɛm se di faya ripɔt we gɛt fɔ du wit di faya de kɔba di rayt prɔdak we dɛn de ɔda.

Us kɔlɔ dɛn de?

Di HSQY rɛnj we de naw de list wayt, rɛd, yɔlɔ, blu, grɛn ɛn blak, wit kɔstɔmayt kɔlɔ dɛn we de bak.

Us tik tik dɛn de?

Di spɛsifikɛshɔn we de naw de list lɛk 1mm to 35mm.

Us density opshɔn dɛn de?

di kכrant dεnsiti rεnj na aprכksimatli 0.35-1.0g/cm³. Di aprɔpriet density dipen pan di bod wet we dɛn nid, rigiditi, fastɛns ɛn fabrikeshɔn pefɔmɛns.

Us standad sheet matirial saiz dɛn de?

HSQY naw de list 1220×2440mm, 915×1830mm, 1560×3050mm ɛn 2050×3050mm, wit kɔstɔmayz dimɛnshɔn dɛn we de bak.

PVC fom bod fit fo dijital printin?

PVC fom bod de yuz plenti as print sabstret, bot ink adheshon en print kwaliti shud verify wit di aktual printa, ink en selekt bod surface bifo bulk prodakshon.

Yu tink se dɛn kin print di bɔd na skrin?

Skrin printin de insay di HSQY aplikeshɔn dɛn we de naw. Di wan dɛn we de bay fɔ validet di ink sistem wit di bod gred we dɛn dɔn pik ɛn di sɔfa finish.

Yu tink se PVC fom bod kin bi CNC rout?

Yɛs. Di matirial kin rout ɛn mashin yuz fayn tul dɛn. Di paramita dɛn we de kɔt fɔ bi ɔptimayz akɔdin to tik ɛn dɛnsiti.

Yu tink se dɛn kin drɔ am, skru am ɔ rivɛt am?

Di HSQY infɔmeshɔn we de naw de list drɔlin, skru, nel ɛn rivet bitwin di we dɛn fɔ mek. Fastener dizayn fɔ mach di bod density ɛn ɛkspɛkt lod.

Yu tink se di bod nɔ de mek wata pas?

Di kɔrɛnt fizik-prɔpati tebul de list wata absɔpshɔn na ≤1.5%. So i kɔrɛkt fɔ tɔk bɔt di bɔd se i nɔ de tek bɔku wata ɔ i nɔ de tek bɔku wata pas i nɔ de tek wata.

Yu kin yuz PVC fom bod na do?

Dɛn rayt di aplikeshɔn dɛn we de na do na di prɔdak infɔmeshɔn we de naw, bɔt di we aw dɛn de yuz am na do fɔ kɔnfɔm di UV stebilizayshɔn we dɛn nid, di weta pefɔmɛns, di kɔlɔ stebiliti ɛn di kɔndishɔn fɔ instɔleshɔn fɔ di gred we dɛn dɔn pik.

Yu tink se di bɔd nɔ gɛt kemikal?

PVC de gi rεsistεns to plεnti envayroment, bכt kompitibiliti dipכnt pan di spεsifi k kεmikכl, kכnsantreshכn, tεmprachכ εn di tεm we dεn de εkspכz. Gi di kemikal infɔmeshɔn fɔ kɔnfɔm.

Yu tink se dɛn kin yuz am fɔ mek kabinɛt dɛn na kichin ɔ fɔ mek batrum?

Kichin ɛn wasrum kabinɛt dɛn de insay di HSQY aplikeshɔn list we de naw. Di wan dɛn we de bay fɔnicha fɔ pik di rayt density ɛn tik fɔ rigiditi, fastening ɛn fabrication rikwaymɛnt dɛn.

Wetin na di Vicat softening point?

Di HSQY fizik-prɔpati tebul we de naw de list wan Vicat sɔftin pɔynt we na lɛk 73-76°C. Di we aw dɛn de du di tɛst ɛn di rayt gred fɔ kɔnfyus usay di ɔt pefɔmɛns rili impɔtant.

Wetin na di MOQ?

Di kɔrɛnt prodak spesifikeshɔn de list wan minim ɔda kwantiti we na 3 tan.

Wetin na di tɛm we dɛn kin sɛn di tin?

Di infɔmeshɔn bɔt di prɔdak we de naw de list lɛk 15-20 dez afta dɛn dɔn put di mɔni. Faynal prodakshɔn tɛm fɔ kɔnfyus akɔdin to kɔlɔ, tik, dɛnsiti, saiz ɛn ɔda kwantiti.

Yu tink se sampul dɛn de?

Di HSQY pej we de naw se fri sɛmpul dɛn de wit freyt we di kɔstɔma pe. Kɔnfɛm di kɔrɛnt sampul avaylabl, saiz ɛn freyt arenjmɛnt bifo shipmɛnt.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi di tik we dɛn nid, di density, di wit, di lɔng, di kɔlɔ, di say we dɛn dɔn finish, di faya standad we dɛn nid, di tin dɛn we dɛn nid fɔ print ɔ fɔ mek, yuz insay ɔ na do, di kwantiti ɛn di say we dɛn want fɔ go.