Kɔlɔ HI PS shit fɔ Tɛmofɔmin & Kastɔm ​​Pat dɛn

Kɔlɔ HI PS shit fɔ Tɛmofɔmin & Kastɔm ​​Pat dɛn

HSQY kala HIPS sheet matirial kɔmbayn impak rɛsistɛns, kɔstɔm kɔlɔ, smol sɔfa kwaliti ɛn thermoforming pefɔmɛns fɔ displei, pak, aplayans pat, sayn ɛn industrial fabrikeshɔn.

High Impact Polystyrene, we dɛn kin kɔl HIPS , na rɔba-modifyed polystyrene matirial we dɛn mek fɔ gi big tafnɛs pas standad GPPS we i de kip gud rigiditi, fɔmabiliti ɛn izi fɔ mek.

HSQY naw de saplae wayt, blak, kala ɛn kɔstɔmayz HIPS sheet matirial s frɔm lɛk 0.2mm to 6mm tik, wit wit we go rich 1600mm fɔ sɔm spɛsifikɛshɔn dɛn we dɛn dɔn pik. Di kɔstɔm kɔlɔ rikwaymɛnt dɛn kin tɔk bɔt akɔdin to di aplikeshɔn, sheet matirial tiknɛs ɛn prodakshɔn kwantiti.

Kɔlɔ HI PS shit Spɛsifikeshɔn dɛn

Spɛsifikeshɔn Notis: Kɔlɔ, sɔfays glos, tɛkstɔr, tiknɛs tolɛreshɔn ɛn fɔm pefɔmɛns dipen pan di HIPS gred we yu dɔn pik ɛn prodakshɔn spɛsifikɛshɔn. Faynal kɔlɔ ɛn sɔfayz apinɛns fɔ apruv bifo bɔku bɔku prodakshɔn usay apia impɔtant.

Wetin Na Kɔlɔ HI PS shit ?

Kɔlɔ HIPS sheet matirial na High Impact Polystyrene we dɛn kɔmpawnd ɔ prodyuz wit wan difayn kɔlɔ pas di matirial we dɛn de saplae ɔl insay standad wayt ɔ blak.

HIPS gεt wan rכba-modifyed fεz we de impruv tכf we yu kכmpεr wit standad Jεnarכl Pכpכz Polistayn. Dis de mek HIPS fayn fɔ prodak dɛm we nid kɔmbayn rigiditi, impak rɛsistɛns, tɛmfɔmin pefɔmɛns ɛn vijual apinɛns.

Matirial we gɛt kɔlɔ kin ridyus di nid fɔ sɛkɔndari peint na sɔm aplikeshɔn dɛn ɛn i kin ɛp di manifakta dɛn fɔ mek dɛn kɔntinyu fɔ gɛt kɔnsistɛns prodak apia akɔdin to tɛmfɔm pat dɛn, displei dɛn, haus dɛn ɛn pak kɔmpɔnɛnt dɛn.

Kastom Kɔlɔ HI PS shit

Kastɔm ​​kɔlɔ na wan pan di men bɛnifit dɛn we dis HIPS prodak gɛt. Di wan dɛn we de bay kin gi wan plastic sampul we dɔn de, wan sɛmpul we dɛn dɔn gri fɔ di prɔdak ɔ we dɛn no bɔt di kɔlɔ rɛfrɛns fɔ tɔk bɔt aw fɔ mach di kɔlɔ fɔ wan nyu prodakshɔn program.

di we aw di kɔlɔ de luk kin chenj wit di tik, di glos we de na di say we i de, layt ɛn dip we i de mek di tɛm we i de mek. Fɔ projɛkt dɛn we gɛt strikt apinans rikwaymɛnt, di finish fɔm kɔmpɔnɛnt fɔ ɛvaluet pas fɔ apruv kɔlɔ ɔl frɔm wan flat sheet matirial .

Ki Bɛnifit dɛn fɔ HI we gɛt kɔlɔ PS shit

• Impɔtant impak rɛsistɛns: Rɔba modifyeshɔn de gi big tafnɛs ɛn krak rɛsistɛns pas standad GPPS .

• Kastom kala kapabiliti: Wayt, blak ɛn prɔjek-spɛsifi k kɔlɔ kin sɔpɔt branded ɔ dɛkɔretiv prɔdak.

• Gud tεmכfכmabiliti: Suitabl HIPS gred dεm kin fכm vεkyum εn tεmכfכm insay tri-dimεnshכnal kכmכpכnεnt dεm.

• Surface flexibility: Dɛn kin tɔk bɔt smol, glos, mat ɛn aplikeshɔn-spɛsifi k finish akɔdin to di prodakt apinans we dɛn nid.

• Printable surface: Suitabl gred kin sɔpɔt skrin, dijital ɛn ɔda printin prɔses afta kɔmpatibiliti tɛst.

• I izi fɔ mek: HIPS kin kɔt, drɔ, rout, day kɔt, mashin ɛn laminate yuz fayn prɔses.

• Laytwɛt ɛn rigid: HIPS de gi yusful panɛl stiffnɛs we i de kip kɔmpɔnɛnt wet rili smɔl.

• Kɔst-ɛfɛktiv prɔsesin: HIPS na tin we dɛn kin yuz bɔku bɔku wan fɔ ay-volyum fɔm ɛn fabrik prodak dɛm we nid fɔ gɛt ikɔnomik tɛmplastik sheet matirial .

Kɔlɔ HI PS shit fɔ Tɛmofɔmin

Tεmכfכm na wan pan di men yus dεm fכ kכla HIPS sheet matirial . di matirial de hεt te i sufayf pliable εn afta dat dεn fכm am agens wan mold yuz vεkyum, prεshכn כ כda suitable fכm prכsεs.

di kכla εn di sכfayz apinεns fכ evaluate afta fכm biכs strεch de chenj lokal sheet matirial tiknes εn i kin infכlכw glos, tεkschuכr εn visible kכla intensiti na dip-drכ εria dεm.

Kɔlɔ HIPS fɔ Pakɛj

Kɔlɔ HIPS kin thermoformed insay trey dɛn , insɛt, protɛktiv pak ɛn ɔda rigid pak kɔmpɔnɛnt usay impak rɛsistɛns, kɔlɔ aydentifikeshɔn ɛn strɔkchɔral rigiditi nid fɔ de.

Fɔ ilɛktroniks, it, mɛdikal ɔ kɔsmɛtik pak, di wan dɛn we de bay fɔ sho di rayt prɔdak-kɔntakt, ESD, rigyuletɔri ɔ hajɛns rikwaymɛnt bifo dɛn pik wan gred. Wan jenɛral kɔlɔ HIPS sheet matirial nɔ fɔ ɔtomɛtik trit as fit fɔ ɛvri pak aplikeshɔn.

Kɔlɔ HIPS fɔ POP Displei & Sayn

Kɔlɔ HIPS sheet matirial yusful fɔ rital displei, POP displei, ɛgzibishin panɛl, shelf kɔmpɔnɛnt ɛn sayn usay manifakta dɛn nid laytwɛt rigid sabstret togɛda wit wan bakgrɔn kɔlɔ we dɛn dɔn difayn.

If yu yuz di tin dɛn we gɛt di bays kɔlɔ we yu nid, dat kin mek yu nɔ gɛt bɔku printin kɔvarej ɔ sɛkɔndari peint we yu nid fɔ peint pan sɔm dizayn dɛn. Printing kompitibiliti stil dipen pan surface finish, surface enaji, ink sistem en curing process.

Printin pan HI we gɛt kɔlɔ PS shit

Yu kin yuz fayn HIPS gred fɔ skrin printin, dijital printin ɛn ɔda grafik prɔses dɛn. Kɔlɔ kɔntrast bitwin di bays sheet matirial ɛn print ink fɔ tink bɔt we dɛn de divɛlɔp di artwok.

Fɔ prodakshɔn printin, di wan dɛn we de bay fɔ kɔnfɔm sɔfays finish, ink kemistri, adheshon, curing ɛn ɛni sɔfa tritmɛnt we dɛn nid. If yu nid fɔ gɛt wan patikyula dayn lɛvɛl ɔ korona tritmɛnt, put am insay di spɛsifikɛshɔn fɔ bay.

Kɔlɔ HIPS fɔ Aplayans Kɔmpɔnɛnt dɛn

HIPS na kɔmɔn fɔ ɛvaluet fɔ frij layna, aplayans haus, kɔva, trey dɛn ɛn intɛriɔ kɔmpɔnɛnt dɛn bikɔs fayn gred dɛn de gi yusful balans fɔ impak rɛsistɛns, tɛmɔfɔmabiliti, rigiditi ɛn apia.

Fɔ aplayans aplikeshɔn, gi ɔpreshɔn tɛmpracha, ditajɛn ɔ kemikal ɛksplɔshɔn, fɔm dip, kɔlɔ, glos ɛn ɛni mɛkanikal tɛst we dɛn nid so dat di matirial go mach to di prodak we dɔn dɔn.

Kɔlɔ HIPS fɔ Ɔtomotiv Intɛriɔ Pat dɛn

Selekt HIPS gred dɛn kin tink bɔt fɔ ɔtomotiv intɛriɔ trim, protɛktiv kɔva ɛn nɔ-strɔkchɔral fɔm pat usay ikɔnomik tɛmfɔmin ɛn kɔlɔ kɔntrol nid.

Ɔtomotiv aplikeshɔn dɛn fɔ spɛsifa ɔt rɛsistɛns, impak pefɔmɛns, ɔda, ɛmishin, flammabiliti ɛn OEM-spɛsifi k rikwaymɛnt dɛn. Standard kala HIPS nɔ fɔ ɔtomɛtik asum fɔ mit ɔtomotiv kwalifayeshɔn rikwaymɛnt.

Kɔlɔ HIPS vs. Peint HIPS

Kɔlɔ HIPS vs. Kɔlɔ ABS Shit

HI PS shit Sɔfayz Finish

Surface finish de infכlכw di apinεns, printin, taktil fil εn di vishכnal risכlt afta tεmכfכm. So di wan dɛn we de bay fɔ spɛsifa di sɔfa we dɛn nid togɛda wit di kɔlɔ.

Yuz na do fɔ HI we gɛt kɔlɔ PS shit

Standard HIPS fɔ bi fɔs fɔ tink bɔt fɔ indo ɔ kɔntrol aplikeshɔn pas nɔmɔ dɛn dɔn divɛlɔp di ɛksaktɔ matirial gred ɛn tɛst fɔ ɛkstend ɔda ɛksplɔshɔn.

If yu de na UV fɔ lɔng tɛm, dat kin afɛkt di kɔlɔ ɛn di mɛkanikal prɔpati dɛn. Di projɛkt dɛn we de na do fɔ spɛsifa di wɛda, UV ɛksplɔshɔn ɛn di savis kɔndishɔn dɛn we dɛn nid so dat dɛn go ebul fɔ evalyu wan fayn stebul gred ɔ ɔda matirial.

Kεmikכl & Mɔstɔ Rεsistεns

HIPS de gi yusful rεsistεns to wata εn sεlekt diluted kεmikכl dεm, bכt di kεmikכl kכmpatibiliti dipכnt pan di εksakεt sכbstans, kכnsantreshכn, tεmprachכ εn di tεm we dεn de εkspos.

If di komponent we dɔn dɔn go kɔntakt ditajɛn, klin, alkol, ɔyl ɔ ɔda kemikal, gi di kɔndishɔn fɔ ɛkspos bifo yu gri fɔ di matirial.

Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt HI we gɛt kɔlɔ PS shit

Wetin gɛt kɔlɔ HIPS sheet matirial ?

Kɔlɔ HIPS na High Impact Polystyrene we dɛn de gi insay wan difayn kɔlɔ pas fɔ jɔs standad wayt ɔ blak. I de kɔba kɔlɔ kɔntrol wit di tafnɛs ɛn tɛmfɔmin prɔpati dɛm fɔ HIPS .

Us kɔlɔ dɛn de?

Di HSQY rɛnj we de naw inklud wayt, blak, kɔlɔ ɛn kɔstɔmayz HIPS sheet matirial s. Faynal kɔstɔm-kɔlɔ avaylabl dipen pan di gred we dɛn nid, tik ɛn prodakshɔn kwantiti.

HSQY kin mach wan kɔstɔm kɔlɔ?

Wi kin tɔk bɔt aw fɔ mach di kɔlɔ we yu want. Gi wan fizik matirial sampul ɔ rɛkɔgnayz kɔlɔ rɛfrɛns usay i pɔsibul, togɛda wit tik ɛn sɔfa-finish rikwaymɛnt.

Yu tink se di kɔlɔ go chenj afta dɛn dɔn mek am we dɛn dɔn mek di tɛm?

di kכla we dεn fil kin chenj na say dεm we strεch כ tin afta dεn tεmכfכm. Dip-dro projɛkt dɛn fɔ so evalyu kɔlɔ pan di finish fɔm kɔmpɔnɛnt.

Us tik tik dɛn de?

Di kɔrɛnt HSQY kɔlɔ HIPS rɛnj de kɔba lɛk 0.2mm to 6mm. Eksakt avaylabl fɔ kɔnfyus akɔdin to di kɔlɔ, sɔfayz finish ɛn sheet matirial wit.

Wetin na di maksimal wit?

Di kɔrɛnt prodakt spɛsifikɛshɔn de list wan maksimal wit we na lɛk 1600mm. Eksakt avaylabl dipen pan tik, kala ɛn prodakshɔn spɛsifikɛshɔn.

Yu tink se kala HIPS sheet matirial kin thermoformed?

Yɛs. Tεmכfכm εn vεkyum fכm na mεjכr HIPS aplikεshכn dεm. Di kondishɔn fɔ ɔt, fɔm dip ɛn mold jɔyometri fɔ tɛst wit di ɛksaktɔ sheet matirial spɛsifikɛshɔn.

Yu kin print HIPS sheet matirial we gɛt kɔlɔ?

Yɛs. Yu kin yuz fayn gred fɔ skrin, dijital ɛn ɔda we dɛn fɔ print. Ink adhesion, surface finish ɛn ɛni tritmɛnt we dɛn nid fɔ kɔnfyus bifo dɛn prodyuz.

Us surface finish dɛn de we dɛn kin gɛt?

Glos, mat, smol ɛn aplikeshɔn-spɛsifi k finish dɛn kin tɔk bɔt. Faynal avaylabl dipen pan di HIPS gred we yu dɔn pik ɛn di prodakshɔn rikwaymɛnt dɛn.

Yu tink se kɔlɔ HIPS fayn fɔ yuz na do?

Standard HIPS gɛt limited resistans to lɔng UV ɛksplɔshɔn. Ɔda aplikeshɔn dɛn fɔ spɛsifa di wɛda pefɔmɛns we dɛn nid so dat dɛn go ebul fɔ evalyu wan fayn stebul gred ɔ ɔda matirial.

Yu tink se yu kin yuz HIPS we gɛt kɔlɔ fɔ pak it?

Fɔ pak it nid fɔ gɛt aplikeshɔn-spɛsifi k matirial gred ɛn aplikebul dɔkyumentri. wan standad kala HIPS sheet matirial nכ fכ tek am כtomatכk se i fayn fכ dayrekt fכd kכntakt.

Di kɔlɔ HIPS strɔng pas GPPS ?

HIPS na rɔba-modify ɛn nɔmal wan i de gi bɛtɛ tafnɛs ɛn krak rɛsistɛns pas GPPS . GPPS na di tipik we dɛn kin pik we transparency ɛn gloss impɔtant mɔ.

Yu kin yuz HIPS we gɛt kɔlɔ insted ɔf ABS?

I dipen pan di pefɔmɛns rikwaymɛnt. HIPS na in dɛn kin pik bɔku tɛm fɔ ikɔnomik tɛmfɔmin, displei ɛn pak, we dɛn kin tek ABS usay dɛn nid difrɛn balans fɔ taf, ɔt rɛsistɛns ɛn injinɛri pefɔmɛns.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di aplikeshɔn, tiknes, sheet matirial dimɛnshɔn, target kɔlɔ, sɔfayz finish, thermoforming ɔ printin prɔses, spɛshal pefɔmɛns rikwaymɛnt, kwantiti ɛn dɛstineshɔn.

Pak & Delivri fɔ di wok

Kɔlɔ HIPS sheet matirial s dɛn pak akɔdin to sheet matirial dimɛnshɔn, tik, sɔfayz rikwaymɛnt ɛn transpɔt kɔndishɔn. Protektiv pak de ɛp fɔ ridyus di surface skratch, kɔntaminɛshɔn, ed damej ɛn muvmɛnt we dɛn de ɛkspɔt shipmɛnt.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae HIPS , GPPS ɛn ɔda plastic sheet matirial matirial fɔ thermoformers, pak manifakta, printin kɔmni, displei prodyusɔ, aplayans manifakta, distribyushɔn ɛn industrial fabricator. Dɛn kin tɔk bɔt di kɔstɔm tiknɛs, kɔlɔ, sɔfayz finish ɛn sheet matirial dimɛnshɔn akɔdin to wetin di prɔjek nid.

HSQY Plastik Grup Ɛgzibishin dɛn

Sɛtifiket dɛn & Dokumɛnt dɛn

Dɛn fɔ kɔnfyus di sɛtifiket dɛn we de ɛn di tɛknikal dɔkyumentri fɔ di ɛksaktɔl kɔlɔ HIPS gred ɛn di aplikeshɔn we dɛn bin want fɔ yuz bifo dɛn gri fɔ di ɔda.