CPET Fɔd Trey fɔ it Manufakchur, CPET Fud tre s Splayer

CPET Fud tre Prodakt Vidio

Wach di vidio dɔŋ ya fɔ lan mɔ bɔt HSQY CPET it trey dɛn fɔ frɔzɛn it, rɛdi it, aylayn ketɛning, institiushɔnal it savis, bekeri prodak ɛn ɔt-ɛn-sav pak.

CPET Fud tre Manufakchur ɛn Spɔla

HSQY Plastic na manifakta ɛn bɔlk saplay fɔ CPET it trey dɛn fɔ frɔzɛn it, chill pripia it, aylayn it, skul it, ɔspitul ketɛning, it delivri, bekeri prodak ɛn ɔda ovenable it pak aplikeshɔn.

CPET tinap fɔ Krɔstal Politilin Tɛriftalayt. Di kɔntrol kristalin strɔkchɔ de gi wan prɔpa dizayn CPET tre bɛtɛ ay-tɛmpracha dimɛnshɔnal stebiliti pas standad APET pak, we de alaw fɔ yuz am insay sɛlɛkɛt friza, maykrowev ɛn kɔvɛnshɔnal-ɔvin aplikeshɔn dɛn.

HSQY de gi mɔ pas 50 tre dizayn dɛn, we gɛt singl-kɔmpatmɛnt, tu-kɔmpatmɛnt ɛn tri-kɔmpatmɛnt fɔmat dɛn. Di kapasiti dɛn we de frɔm lɛk 300 ml to 6000 ml, wit blak, wayt ɛn kɔstɔmayz kɔlɔ dɛn we de akɔdin to di kwantiti we dɛn ɔda ɛn di we aw dɛn go mek di prodakshɔn.

CPET trey dɛn kin sɔpɔt wan kɔvinant pripia, fil, sial, chil ɔ friz, transpɔt ɛn rihit wokflɔ. Di fainal tre , lidding film ɛn ɔt instrɔkshɔn fɔ validet togɛda yuz di aktual it, fil wet, siling ikwipmɛnt, stɔrɔj ​​kɔndishɔn, ɔvin tɛmpracha ɛn ɔt tɛm.

Standart dizayn kin ridyus tul tɛm ɛn di fɔs prɔjek kɔst. Dimɛnshɔnal, dip, kapasiti, kɔmpawtmɛnt layout, tre wet, kɔlɔ, silin flɛnch ɛn ɛmbos brandin kin divɛlɔp bak fɔ kwalifay bɔlk prɔjek dɛn.

Rikwest CPET Fɔd Trey fɔ it Prayz    Rikwest Sampul ɛn Sayz dɛn

CPET Fud tre Spɛsifikeshɔn dɛn

Tεmpratura pεrformεns nכ de ditarεmin bay CPET mεtirial nכmכ. Di dimɛnshɔn fɔ di trey, di tik we di wɔl tik, di kristaliniti, di lod fɔ it, di kayn ɔvin, di tɛm we dɛn de ɔt, di fim we dɛn kin yuz fɔ lid ɛn di kɔndishɔn dɛn we dɛn kin sɔpɔt kin afɛkt di fayn fayn wok we dɛn de du.

Faynal dimɛnshɔn, kapasiti, tre wet, tolɛreshɔn ɛn it-kɔntakt rikwaymɛnt fɔ kɔnfɔm tru wan aprɔv sampul, drɔin, spɛsifikɛshɔn sheet matirial ɛn bay agrimɛnt.

Ki Bɛnifit dɛn fɔ CPET Fud tre s

Dual-Ovenable Fɔd Pakɛj

CPET trey dɛn we dɛn mek fayn fayn wan kin yuz insay ɔl tu di maykrowev ɛn kɔvɛnshɔnal-ɔvin aplikeshɔn dɛn. Dis de alaw di wan dɛn we de mek it fɔ gi fleksibul instrɔkshɔn fɔ ɔt to di wan dɛn we de bay, di wan dɛn we de wok wit it-savis ɛn di institiushɔnal ketɛning program dɛn.

Friza-to-Oven Wokflɔ

Validated CPET pak kin sɔpɔt kol ɔ frɔzɛn stɔrɔj ​​we dɛn kin fala wit maykrowev ɔ kɔvɛnshɔnal-ɔvin ɔt. Di tre fɔ tɛst wit di aktual it ɛn ɔt program bifo kɔmɛshɔnal lanch.

Dimɛnshɔnal Stebiliti We Dɛn De Hɛt

di kristalin strכkchכ de εp wan fayn CPET tre mεnten prεktikal shep εn rigiditi na tεmprachכ we go difכm plεnti standad kol-fud PET kכntena dεm.

Singl ɛn Mɔlti-Kɔmpatmɛnt Dizayn dɛn

Wan-kɔmpatmɛnt trey dɛn fayn fɔ entre, pasta, rays dish ɛn bekeri prodak. tu kכmpartimεnt εn tri kכmpartmεnt trey dɛn de εp fכ separet protin, vεgεtebul, rays, sos εn sayd dish dεm.

Flange we dɛn kin sidɔm wit ɔt

CPET trey dɛn kin disayn wit wan kɔnsistɛns silin flɛnch fɔ kɔmpitabl lid film dɛn. Wan stebul sil kin sɔpɔt prodakt protɛkshɔn, transpɔt, tamper ɛvidɛns ɛn kɔshɔma kɔvinant.

Gris ɛn Fɔd Resistɛns

CPET trey dɛn kin yuz wit it we gɛt ɔyl, wet ɛn sos we dɛn pik di matirial, tre strɔkchɔ ɛn silin sistɛm fɔ di risɛp we dɛn want ɛn di kɔndishɔn fɔ kip am.

Otomatik Filin ɛn Silin Kɔmpatibiliti

Trey dimɛnshɔn, nɛst, denest, flɛnch flatnɛs ɛn silin tolɛreshɔn kin disayn fɔ manual, sɛmi-ɔtomɛtik ɔ ɔtomatik it-fil ɛn tre -siling layn dɛn.

Kastom Branding Opshɔn dɛn

Kastomayz kɔlɔ, ɛmbos logo, mold prodak kɔd, kaviti aydentifikeshɔn ɛn katon lɛbl kin sɔpɔt prayvet-lɛbul ɛn branded it-pak program dɛn.

Singl, Tu ɛn Tri-Kɔmpatmɛnt CPET fud tre

Aw fɔ Pik di Rayt CPET Fɔd Trey fɔ it Kapasiti

Tray kapasiti fɔ pik yuz di aktual it wet ɛn fil volyum pas fɔ abop pan di nominal mililita ɔ ɔns raytin nɔmɔ.

CPET Fɔd Trey fɔ it Lidding Film ɛn Silin Kɔmpatibiliti

Wan CPET tre fɔ pik togɛda wit di lidding film ɛn tre -siling prɔses. Trey matirial nɔmɔ nɔ de sho di sil trɛnk, lik rɛsistɛns, di peel pefɔmɛns ɔ shelf layf.

Film we dɛn kin yuz fɔ lid we izi fɔ pul

Dɛn mek fim dɛn we izi fɔ pul fɔ mek dɛn gɛt sikrit sil ɛn di wan dɛn we de yuz am fɔ pul di fim we dɛn nɔ gɛt pawa pasmak. di trεnk fכ di pil fכ mach wit di tre flenj, di tכp fכ it εn di kol-stכrej kכndishכn dεm.

Fim we de agens fɔg

Anti-fog pefomans kin mek di prodakt visibiliti bɛtɛ we di mɔstɔ kɔndens insay kol it pak. di pefomans dipכnt pan di film, di fכd mכsichכ, tεmprachכ εn di tεm we dεn de stכr am.

Film we dɛn kin yuz fɔ lid we dɛn kin yuz fɔ mek ɔvin

Sɔm aplikeshɔn dɛn kin mek di fim de na di tre we i de ɔt, ɔda wan dɛn kin tɛl di wan dɛn we de bay fɔ pul ɔ pul di fim. Di fim ɛn di instrɔkshɔn dɛn we di kɔstɔma dɛn dɔn pik fɔ validet fɔ di ɔvin ɛn maykrowev kɔndishɔn dɛn we dɛn want.

High-Barrier ɛn MAP Aplikeshɔn dɛn

Ekstend-shɛlf-layf ɔ modifyed-atmosfɛs projɛkt dɛn kin nid fɔ gɛt wan spɛshal tre strɔkchɔ, silan layt ɛn ay-baria lid fim. Shelf layf fɔ establish tru prodak-spɛsifi k tɛst pas fɔ asum frɔm tre matirial nɔmɔ.

Paramita dɛn fɔ Sial

Sial tɛmpracha, prɛshɔn, tɛm fɔ de, tul flatnɛs ɛn flɛnch klin de afɛkt di sil kwaliti. Di tɛst dɛn fɔ inklud di trɛnk we di peel gɛt, we di chanɛl lik, we i nɔ de bɔs, we i de kip am kol, we i de kip am we i dɔn frɔz ɛn we i de ɔt bak.

Aks Bɔt CPET Sial Film

CPET Fɔd Trey fɔ it Kol-Chen ɛn Itin Wokflɔ

Aplikeshɔn dɛn fɔ CPET Fud tre s

Frɔzɛn rɛdi it dɛn

CPET trey dɛn na tin we dɛn kin pik fɔ frɔzɛn pasta, rays it, kɔri, mit ɛntrɛ, vɛjitebul, kasrɔl ɛn it dɛn we dɛn kin kɔntrol pat we di pɔsin we de bay go ɔt bak.

Di it dɛn we dɛn dɔn pripia we dɛn dɔn kol

Di wan dɛn we de mek it we dɛn dɔn kol kin yuz CPET trey dɛn we dɛn dɔn sial fɔ ɔt-ɛn-it it dɛn we dɛn kin sheb tru supamakit, kɔnvɛnshɔn stɔ, it-delivri savis ɛn institiushɔnal kichin.

Aylayn ɛn Relwe Ketin

Kompakt singl ɛn mɔlti-kɔmpatmɛnt CPET trey dɛn kin disayn fɔ pat-kɔntrol aylayn it, relwe ketɛning ɛn ɔda transpɔt-fud program dɛn we nid fɔ mek dɛn stak ɛn rihit fayn fayn wan.

Skul, Ospital ɛn Instityushɔnal It

Compartmented trey dɛn kin separet di men kɔs ɛn sayd dish fɔ skul, ɔspitul, kia os, prizin, wokples ketɛning ɛn it-sɔpɔt program.

Meals on Wheels ɛn Dilivri na Os

Sial CPET trey dɛn kin sɔpɔt pripia-mɛl delivri program usay di it dɛn kin kol ɔ frɔz ɛn rihit leta bay di pɔsin we de gɛt am.

Bekeri ɛn Desɛt Prodakt dɛn

Yu kin yuz fayn CPET trey dɛn fɔ kek, paste, pay, krɔmbul, bred prodak ɛn dɛzat we nid fɔ bek, ɔt bak, frɔzɛn stɔrɔj ​​ɔ prɛzɛnt frɔm ɔvin-to-shɛlf.

Mit, Pɔltri, Sifud ɛn Vɛjitebul Dish dɛn

CPET pak kin bi divεlכp fכ marinated mit, pכltri dish, sifud it, vεgεtebul εn sayd dish, sכbjεkt to rεsipi-spεsifi k siling εn hεt tεst.

Ritayl ɛn Food-Service Meal Kits

Single-serve ɛn famili-sayz CPET trey dɛn kin yuz fɔ supamaket it kit, pripia dish, rɛstɔrant tek-hom it, ketɛning ɛn sɛntral-kichin prodakshɔn.

CPET vs. PP, APET ɛn Aluminiɔm Fud tre s

Di kɔrɛkt tre matirial fɔ pik akɔdin to di we aw dɛn de ɔt, di tɛmpracha we dɛn de kip am, di shelf-layf target, di we aw di prɔdak de luk, di we aw dɛn de silin, di tin dɛn we dɛn nid fɔ risaykul ɛn di ɔl di kɔst fɔ pak di tin dɛn.

Standart CPET fud tre vs. Kastɔm CPET fud tre

Kastɔm CPET Fɔd Trey fɔ it Divɛlɔpmɛnt Prɔses

1. Rivyu fɔ di Aplikeshɔn

Gi di kayn it, di wet fɔ di pat, di kɔndishɔn fɔ kip am, di we aw dɛn de ɔt, di target makit, di lidding film ɛn di pak in ikwipmɛnt infɔmeshɔn.

2. Tray Dizayn ɛn Draw

HSQY de rivyu di prɔpɔz dimɛnshɔn, kapasiti, dip, kɔmpawtmɛnt rɛsɛshɔn, kɔna rayus, flɛnch wit, stak ɛn denɛst rikwaymɛnt.

3. Tul Evalueshɔn

Tulin kɔst, kaviti layout, prodakshɔn efyushɔn, sampul tɛm ɛn ɛkspɛkt ɔda volyum dɛn de rivyu bifo mold prodakshɔn.

4. Sampul Prodakshɔn

Dɛn de evalyu sampul fɔ dimɛnshɔn, kapasiti, wɔl distribyushɔn, flɛnch flatnɛs, stak, denɛst, silin ɛn ɔt pefɔmɛns.

5. Kastamɔ Layn Trayal

Di kɔstɔma de tɛst di trey dɛn wit di aktual it, filin sistɛm, denɛsta, silin film, silin mashin, kol chen ɛn ɔt instrɔkshɔn.

6. Spɛsifikeshɔn Aprɔval

Di fainal drɔin, tre wet, tolɛreshɔn, kɔlɔ, pak kwantiti, katon dimɛnshɔn, lɛbl ɛn inspekshɔn rikwaymɛnt dɛn apruv bifo mas prodakshɔn.

CPET Fɔd Trey fɔ it Tɛst ɛn Kwaliti Chɛk

• Ekstanshal dimɛnshɔn, intanɛnt dimɛnshɔn, dip ɛn kapasiti.

• Trey wet ɛn wet tolɛreshɔn.

• Kɔlɔ ɛn di kɔnsistɛns we pɔsin kin si.

• Flɛnch flatnɛs ɛn silin-sɔfays klin.

• Nesting ɛn ɔtomatik-denɛst pefɔmɛns.

• Kɔmpreshɔn, stak ɛn transpɔt rɛsistɛns.

• Frɔzɛn-drɔp ɛn lɔw-tɛmpracha hanlin pefɔmɛns.

• Maykrowev ɔt yuz di aktual it ɛn ɔt instrɔkshɔn.

• Kɔnvɛnshɔnal-ɔvin ɔt yuz di aktual tɛm, tɛmpracha ɛn it lod.

• Sil trɛnk, peel bihayvya ɛn lik rɛsistɛns.

• Maygrɛshɔn ɔ fud-kɔntakt tɛst we di dɛstineshɔn makit nid.

Fɔd-Kɔntakt ɛn Rigyuletɔri Rikwaymɛnt dɛn

Fɔd-pakɛj kɔmplians dipen pan di ɛksaktɔ CPET rɛsin, aditiv, kɔlɔ mastabatch, risaykul-kɔntinɛnt lɛvɛl, manufakchurin spɛsifikɛshɔn ɛn dɛstineshɔn makɛt.

Di wan dɛn we de bay fɔ sho di kɔntri we dɛn want fɔ it, di kayn it we dɛn want fɔ it, di tɛm we dɛn go kɔntakt, di tɛmpracha we dɛn fɔ kip, di kɔndishɔn fɔ ɔt ɛn di standad dɛn we dɛn nid bifo dɛn ɔda.

Sɔpɔt dɔkyumɛnt dɛn fɔ rivyu agens di ɛksaktɔl tre spɛsifikɛshɔn. Wan jenɛral rɛsin ripɔt ɔ manejmɛnt-sistim sɛtifiket nɔ de pruv ɔtomɛtik wan se yu de fala fɔ ɛvri CPET tre ɛn aplikeshɔn we dɔn dɔn.

Di instrɔkshɔn fɔ ɔt fɔ di kɔstɔma, maksimal tɛmpracha, maksimal tɛm fɔ ɔt, instrɔkshɔn fɔ pul di fim ɔ fɔ mek di vent ɛn di wɔnin dɛn we di hot-sɔfays fɔ gɛt, na di pɔsin we de mek di it we dɔn dɔn fɔ validet.

CPET Fɔd Trey fɔ it Risaykul ɛn Sastaynabiliti Kɔnsidɛreshɔn

CPET de pan di PET matirial famili, bɔt di aktual kɔlɛkshɔn ɛn risaykul akseptɛns kin difrɛn bay kɔntri, munisipaliti, tre kɔlɔ, it kɔntaminɛshɔn, lɛbl, lid fim ɛn lokal sɔt infrastukchɔ.

Di tre nɔ fɔ diskrayb as yunivasal risaykul pas di klem dɔn verify fɔ di target makɛt ɛn fayn pakej strɔkchɔ.

Risaykul-kɔntinɛnt CPET kin de fɔ sɔm prɔjek dɛn we dɛn dɔn pik. Di alawable risaykul kɔntinyu dipen pan rigyuletɔri rikwaymɛnt, kɔlɔ, apinans, mɛkanikal pefɔmɛns ɛn di spɔlayt in validet matirial sistɛm.

Optimayz tre wet, nɛst efyushɔn, katon yutilizeshɔn, palet lod ɛn prodak protɛkshɔn kin ridyus pak ɛn transpɔt impak witout kɔmprɔmis fud sefty ɔ tre pefɔmɛns.

CPET Fɔd Trey fɔ it Pakɛj ɛn Delivri

Insay pak: Dɛn kin nest trey dɛn ɛn pak dɛn insay PE bag dɛn we de protɛkt dɛn fɔ ridyus dɔst ɛn kɔntaminɛshɔn we dɛn de handle.

Ɔta pak: Dɛn kin pik ɛkspɔt katon dɛn akɔdin to tre dimɛnshɔn, nɛst ayt, stak prɛshɔn ɛn transpɔt rikwaymɛnt.

Katon kwantiti: Di ​​nɔmba fɔ trey dɛn fɔ wan katon dipen pan di tre saiz, dip, kɔmpawtmɛnt layout ɛn nesting pitch.

Palletization: Dɛn kin divɛlɔp palet kɔnfigyushɔn akɔdin to di katɔn dimɛnshɔn, westɛm hanlin ɛn kɔntena-lod rikwaymɛnt.

Kastom lɛbl: Katon kin gɛt prɔdak kɔd, dimɛnshɔn, kwantiti, prodakshɔn infɔmeshɔn, barɔd ɛn kɔstɔma-spɛsifi k shiping mak.

Lid tɛm: Prodakshɔn tɛm dipen pan if di tre yuz wan mold we dɔn de ɔ nid kɔstɔm tul, ɛn bak di ɔda kwantiti, kɔlɔ ɛn pak we dɛn nid.

Infɔmeshɔn we dɛn nid fɔ wan CPET Fɔd Trey fɔ it Kɔteshɔn

• Food type ɛn finish it diskripshɔn.

• Pɔshɔn wet ɛn rikwayd tre kapasiti.

• Dimɛnshɔn fɔ lɔng, waid, dip ɛn flɛnch dimɛnshɔn dɛn we dɛn nid.

• Singl, tu ɔ tri kɔmpawtmɛnt layout.

• Blak, wayt, mɛtal-fes ɔ kɔstɔmayt kɔlɔ.

• Chil ɔ frɔzɛn stɔrɔj ​​tɛmpracha.

• Maykrowev ɛn kɔvɛnshɔnal-ɔvin ɔt kɔndishɔn dɛn.

• Lidding-film tayp ɛn tre -siling-mashin mɔdel.

• MAP , ay-baria, anti-fɔg ɔ izi-pil rikwaymɛnt.

• Rikwayd tre wet, rigiditi ɛn stak trɛnk.

• Trayal kwantiti, fɔs ɔda ɛn ɛni ia fɔkɔs.

• Di kɔntri we yu de go ɛn di standad fɔ kɔntakt it.

• Katon kwantiti, paletayzeshɔn ɛn lɛbl rikwaymɛnt dɛn.

Send Yu CPET Fɔd Trey fɔ it Rikwaymɛnt dɛn

Wetin Mek Yu Pik HSQY as Yu CPET Fɔd Trey fɔ it Spɔla?

HSQY Plastic Group de saplae plastic sheet matirial matirial, thermoformed fud trey dɛn , lidding film ɛn kɔstɔmayz fud-pak sɔlvishɔn to intanashɔnal distribyushɔn, fud manifakta, pak kɔnvɔta ɛn ketɛn saplay.

• Mɔ pas 50 CPET tre dizayn dɛn we dɔn de.

• Singl, tu ɛn tri-kɔmpatmɛnt opshɔn dɛn.

• di kapasiti dεm frכm lεk 300 ml to 6000 ml.

• Blak, wayt ɛn kɔstɔmayt kɔlɔ opshɔn dɛn.

• Redi-mil, aylayn, bekeri ɛn institiushɔnal ketɛning sɔlvishɔn.

• Kompatibl izi-pil, anti-fɔg ɛn aplikeshɔn-spɛsifi k lidding film dɛn.

• Dizayn dɛn we dɔn de fɔ fast sampling ɛn projɛkt ɛvalueshɔn.

• Kastom tre dizayn, tul ɛn OEM divɛlɔpmɛnt.

• Ekspɔt katɔn, palet ɛn kɔstɔma-lɛbul kɔstɔmayshɔn.

• Bulk prodakshɔn sɔpɔt fɔ fud manifakta ɛn distribyushɔn.

HSQY rikɔmɛnd fɔ kɔmplit tre , silin-film, stɔrɔj ​​ɛn ɔt tɛst bifo kɔmɛshɔnal prodakshɔn. Di apruv tre fɔ kɔntrol tru wan fayn drɔin ɛn prodak spɛsifikɛshɔn.

Kontakt HSQY fɔ Sampul ɛn Prayz

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt CPET Fud tre s

Wetin na CPET it tre ?

CPET it tre na wan tεmכfכm kכntena we dεn mek wit Krystalin Poliεtilen Tεrεftalεt. Dɛn kin yuz am fɔ it tin dɛn we dɛn dɔn mek we dɛn dɔn kol ɛn we dɛn dɔn frɔz we dɛn kin ɔt bak na maykrowev ɔ kɔmɔn ɔvin.

Wetin dual-ovenable min?

Dual-ovenable min se di validated pakej kin yuz in ɔl tu maykrowev ɛn kɔvɛnshɔnal-oven ɔt aplikeshɔn. di maksimal tεmprachכ we dεn apruv εn di tεm we dεn de hεt dipכnt pan di tre disayn εn di fכd prodak we dεn dכn fכs.

Us tɛmpracha CPET trey dɛn kin bia?

Suitable CPET trey dɛn na kɔmɔn fɔ disayn fɔ kɔndishɔn dɛn we de frɔm frɔzɛn stɔrɔj ​​to ay-tɛmpracha rihit. HSQY de yuz wan tipik dizayn rɛfrɛns we de lɛk -40°C to +220°C, bɔt di fayn rɛnj fɔ validet fɔ di ɛksaktɔ tre , it ɛn ɔt program.

Yu tink se CPET tre kin go dairekt frɔm di friza to di ɔvin?

Wan CPET it pak we dɛn mek fayn fayn wan ɛn we dɛn dɔn tɛst kin sɔpɔt fɔ yuz friza to ɔvin. Frɔzɛn-drɔp rɛsistɛns, tɛmal shɔk, ɔvin sɔpɔt, it lod ɛn ɔt instrɔkshɔn fɔ verify bifo yu mek dis klem.

CPET trey dɛn maykrowev sef?

Suitabl CPET trey dɛn kin yuz fɔ maykrowev rihit afta di tre , it, lidding film ɛn kɔshɔma instrɔkshɔn dɛn dɔn validet togɛda.

CPET trey dɛn sef fɔ kɔvɛnshɔnal ɔvin?

CPET na in dɛn pik fɔ kɔvɛnshɔnal-ɔvin aplikeshɔn bikɔs ɔf in ɔt stebiliti. Di wan we mek di it we dɛn dɔn it fɔ mek di maksimal tɛmpracha na di ɔvin, di tɛm we dɛn fɔ ɔt ɛn di instrɔkshɔn dɛn bɔt aw fɔ ol am.

Yu tink se dɛn fɔ pul di fim we de sidɔm bifo dɛn wam am?

Dis dipen pan di lidding-film spesifikeshɔn ɛn di it dizayn. Dɛn kin pul sɔm fim dɛn, dɛn kin kɔt sɔm ɔ pul di briz, ɛn dɛn kin mek sɔm fɔ patikyula tin dɛn we kin mek dɛn wam. Fɔ fala di instrɔkshɔn dɛn we dɛn dɔn validet fɔ di paket we dɔn dɔn.

Yu tink se CPET trey dɛn kin ɔt sial?

Yɛs. CPET trey dɛn kin ɔt sial wit wan kɔmpitabl film. Sil tɛmpracha, prɛshɔn, tɛm fɔ de, flɛnch klin ɛn tul fɔ bi ɔptimayz fɔ di tre ɛn film we dɛn dɔn pik.

Us liding film dɛn de yuz fɔ CPET trey dɛn ?

Opshɔn dɛn inklud izi-pil, anti-fɔg, ovenable ɛn aplikeshɔn-spɛsifi k barɛri lid film dɛn. Di fim fɔ mach to di CPET silin sɔfa, tre sial ɛn it-pak rikwaymɛnt.

Yu kin yuz CPET trey dɛn fɔ MAP pak?

Dɛn kin yuz CPET sistem dɛn we dɛn dɔn pik fɔ modify-atmosfɛs pak we dɛn disayn ɛn tɛst di tre strɔkchɔ, silan layt, lidin fim, gas miksɔp ɛn silin prɔses togɛda.

CPET trey dɛn de ɛkstɛnd di it shelf layf?

Shelf layf dipen pan di it fɔmyulashɔn, hajɛns, filin prɔses, sil intɛgriti, barɛri strɔkchɔ, stɔrɔj ​​tɛmpracha ɛn distribyushɔn kɔndishɔn. I fɔ establish tru prodak-spɛsifi k shelf-layf tɛst.

Yu tink se wan, tu ɛn tri kɔmpawtmɛnt CPET trey dɛn de?

Yɛs. HSQY de saplae singl, tu ɛn tri-kɔmpatmɛnt fɔmat fɔ rɛdi it, aylayn it, skul it, ɔspitul it ɛn pat-kɔntrol it savis.

Us kapasiti dɛn de?

HSQY in rεnj we de kכba lεk 300 ml to 6000 ml, inklud singl-sεv, mכlti-pכshכn εn famili-sayz fכmat dεm.

Us kɔlɔ dɛn de?

Standart opshɔn dɛn inklud blak ɛn wayt. Gold-fes, silva-fes ɛn ɔda kɔstɔmayt kɔlɔ dɛn kin de akɔdin to di tre strɔkchɔ, kɔlɔ we dɛn nid ɛn di minim ɔda kwantiti.

Yu tink se CPET trey dɛn kin kɔstɔmayz?

Yɛs. Kastom opshɔn dɛn inklud lɔng, wit, dip, kapasiti, kɔmpatmɛnt layout, flɛnch, tre wet, kɔlɔ, ɛmbos, katon kwantiti ɛn lɛbl.

HSQY kin mek wan tre frɔm mi drɔin ɔ sampul?

HSQY kin evalyu wan drɔin, fizik sampul ɔ aplikeshɔn rikwaymɛnt. Sɔntɛm dɛn nid nyu tul dɛn, ɛn di prɔjek go nid fɔ drɔ aprɔval ɛn prodakshɔn tɛst.

Us infɔmeshɔn dɛn nid fɔ divɛlɔp wan kɔstɔm CPET tre ?

Gi di kayn it, di pat wet, di dimɛnshɔn we dɛn nid, kapasiti, kɔmpawtmɛnt, di kɔndishɔn fɔ ɔt, di lidding film, tre -sila mɔdel, ɛni ia kwantiti ɛn di target makɛt.

CPET trey dɛn fayn fɔ it na aylayn?

Yɛs. Kɔmpakt CPET trey dɛn dɛn kin yuz bɔku bɔku wan fɔ aylayn ketɛning bikɔs dɛn kin sɔpɔt pat kɔntrol, efishɔnal stak, sial, kol ɔ frɔzɛn stɔrɔj ​​ɛn rihit.

Yu tink se CPET trey dɛn kin yuz fɔ bekɛri prɔdak?

Yu kin yuz fayn CPET trey dɛn fɔ pie, kek, pastries, krumbl, bred ɛn ɔda bekeri prodak dɛm we nid fɔ friz, bek ɔ rihit.

CPET trey dɛn na risaykul?

CPET de pan di PET famili, bɔt di aktual risaykul akseptɛns dipen pan lokal kɔlɛkshɔn sistɛm, tre kɔlɔ, it kɔntaminɛshɔn, lɛbl ɛn di kɔmplit pakej strɔkchɔ. Dɛn fɔ chɛk di lokal risaykul gayd.

CPET trey dɛn kin gɛt risaykul matirial?

Risaykul-kɔntinɛnt opshɔn dɛn kin de fɔ sɔm spɛsifikɛshɔn dɛn we yu dɔn pik. Di kɔntinyu we dɛn alaw dipen pan di tin dɛn we dɛn nid fɔ kɔntakt wit it, aw i luk, aw i de du ɛn di rigyuleshɔn dɛn we de na di say we dɛn de go-maket.

Wetin na di MOQ fɔ CPET it trey dɛn ?

Di standad MOQ fɔ di prɔdak dɛn we de naw na jɔs 50,000 pis. Kastom tul, spɛshal kɔlɔ ɔ kɔstɔm strɔkchɔ kin nid fɔ gɛt mɔ kwantiti.

CPET tre sampul dɛn de?

Existing-dizayn samples kin bi saplai fɔ chɛk dimɛnshɔn, kapasiti, stak, sial ɛn ɔt pefɔmɛns. Nɔmal wan na di pɔsin we bay di tin kin pe fɔ di freyt we dɛn kin kɛr go.

Aw fɔ tɛst CPET trey dɛn bifo dɛn ɔda?

Test di tre wit di aktual it, fil wet, lidding film, tre sila, kol-stɔrɔj ​​kɔndishɔn, transpɔt we, maykrowev instrɔkshɔn ɛn kɔvɛnshɔnal-ɔvin instrɔkshɔn.

Wetin na di prodakshɔn lida tɛm?

Lid tɛm dipen pan if dɛn pik wan tre dizayn we dɔn de ɔ dɛn nid fɔ yuz nyu tul. Kwantiti, kɔlɔ, pak ɛn prodakshɔn scheduling kin afɛkt di delivri bak.

Aw a go gɛt CPET tre kot?

Send di tre dimɛnshɔn dɛn we dɛn nid, kapasiti, kɔmpatmɛnt dɛn, kɔlɔ, kwantiti, it aplikeshɔn, ɔt kɔndishɔn, silin-fim infɔmeshɔn, usay yu want fɔ go ɛn di tin dɛn we yu nid fɔ fala.

Get wan Kastɔm CPET Fɔd Trey fɔ it Kɔt