A4 Saiz Inkjet Print PVC ID Kad Mek Sheet Materials

Wetin Na A4 Inkjet Printable PVC ID Kad Shit dɛn?

A4 inkjet printabl PVC ID kad sheet na spɛshal kɔt plastic matirial dɛn we dɛn kin yuz fɔ mek pɔsnalayz wokman kad, mɛmbaship kad, lɔyalti kad, visitɔ badge, studɛnt kad, ɔtel kad, akses-kɔntrol kad ɛn prɔmoshɔnal plastic kad.

Nɔ lɛk ɔdinari PVC kad kɔr we nɔ gɛt kɔt, wan PVC sheet we dɛn kin print wit inkjɛt gɛt wan sɔfayz kɔtin we dɛn mek fɔ gɛt inkjet ink we kɔmpitabl. Di kɔtin kin mek di ink absɔpshɔn, di difinishɔn fɔ di pikchɔ, di kɔlɔ dɛnsiti ɛn di drying pefɔmɛns we dɛn yuz am wit di kɔrɛkt printa ɛn ink sistem.

HSQY de saplae A4, A5, CR80 ɛn kɔstɔmayz PVC kad matirial, inklud inkjet printabl fes shit, PVC kad kɔr shit, transparent kɔt ɔvlay, nɔ-laminɛshɔn kad matirial ɛn finish blank PVC kad.

A4 printabl sheet dɛn nɔmal fɔ print yuz wan kɔmpatib sheet-fed inkjet printa ɛn afta dat dɛn kin jɔyn wit kad kɔr ɛn ɔvlay layers. Dɛn kin lamin di sheet we dɛn dɔn gɛda, kol am ɛn kɔt am insay kad dɛn we dɔn dɔn.

Finish CR80 blank kad dɛn de yuz difrɛn prodakshɔn wokflɔ. Dɛn fɔ lod dɛn insay dairekt-to-kad, ritransfa ɔ kɔmpitabl kad printa we de aksept di kad matirial, dimɛnshɔn, tik ɛn sɔfays strɔkchɔ.

Di kɔmpitishɔn fɔ di printa nɔto fɔ ɔlman. Di wan dɛn we de bay fɔ gi di printa brand, di printa mɔdel, di kayn ink, di we aw dɛn de fid di shit, di maksimal tik we di midia tik, di lamineshɔn ikwipmɛnt ɛn di tin dɛn we dɛn nid fɔ mek di kad we dɔn dɔn bifo dɛn ɔda.

Di tin dɛn we dɛn mek fɔ gɔvmɛnt kredibiliti, bank kad, pemɛnt kad, laysens ɔ ɔda aydentiti dɔkyumɛnt dɛn we dɛn dɔn rigul, na ɔganayzeshɔn dɛn nɔmɔ we gɛt rayt fɔ du dat we de wok ɔnda di sikyɔriti ɛn kɔmplians prosidur dɛn nɔmɔ fɔ bay ɛn yuz dɛn.

Rikwest PVC Kad Shit Prayz    Rikwest fɔ Print Sampul dɛn

Inkjet printable PVC ID kad sheet imej dɛn

A4 Inkjet PVC ID Kad Sheet Spesifikasi

Faynal shit tik, di kayn kɔtin, sayd we dɛn kin print, di sɔfa finish, layt kɔmbayn, kad dimɛnshɔn, tolɛreshɔn ɛn pak fɔ kɔnfyus tru wan aprɔv sampul ɛn rayt prodak spɛsifikɛshɔn.

Di kayn tin dɛn we dɛn kin yuz fɔ mek PVC ID Kad

PVC kad matirial dɛn de insay difrɛn difrɛn we dɛn. If yu pik di rɔng kayn matirial i kin mek yu gɛt prɔblɛm wit di fidin, ink nɔ kin adheshon fayn, i kin mek yu lamination wik ɔ i nɔ kin tik di kad we dɔn dɔn kɔrɛkt wan.

Komon 0.76mm PVC Kad Layer Struktur

Wan finish 0.76mm kad kin prodyuz yuz difrɛn layt kɔmbaynshɔn. Di kɔrɛkt strɔkchɔ dipen pan if di layt we dɛn print de wok bak as di kɔr, if dɛn yuz sɛpret ɔvlay ɛn aw di layt dɛn de fiuz we dɛn de lamin.

Nominal layt tiknes nɔ kin ikwal ɔltɛm to di ɛksaktɔ fainal kad tiknes afta lamination. Kɔmpreshɔn, tik we di kɔtin tik, di matirial shrinkage ɛn kol prɛshɔn kin afɛkt di rizɔlt we dɔn dɔn.

Ki Ficha dɛn fɔ Inkjet Printable PVC Kad Shit dɛn

Inkjet-Kɔmpatibl Surface Kɔtin

Di say we dɛn kɔt, dɛn mek am fɔ mek i wet ɛn absɔp di inkjet ink we kɔmpitabl. Dis de ɛp fɔ ridyus bid, smudging ɛn ink we nɔ de kɔntrol we yu kɔmpia am wit ɔdinari PVC we nɔ gɛt kɔt.

Ay-Rɛzolushɔn Pɔsnalayzeshɔn

Wan fayn sheet, ink ɛn printa kɔmbayn kin riprodyuz foto, logo, tɛks, QR kɔd, barɔd ɛn vayriɔbul kad ɔlda infɔmeshɔn.

Printin we gɛt wan ɔ tu say

Yu kin put kɔtin dɛn we yu kin print na wan ɔ ɔl tu di say dɛn. Di say we dɛn kɔt fɔ no klia wan bifo dɛn print ɛn gɛda layt.

Stebul Shit Flatnɛs

Kontrol flatnɛs ɛn skweanɛs sɔpɔt rili sheet fidin, artwok rɛjista, layt alaynɛshɔn ɛn kad kɔt.

Tik we dɛn kin kɔntrol

Kɔnsistɛns layt tiknɛs de ɛp kad manifakta dɛn fɔ kɔntrol di finish 0.76mm kad gej ɛn ridyus difrɛns bitwin prodakshɔn batch dɛn.

Lamineshɔn Kɔmpatibiliti

Kɔmpatibl PVC layers kin fiuz ɔnda validet ɔt, prɛshɔn ɛn dwɛl-taym kɔndishɔn fɔ mek wan yunifayd kad bɔdi.

Kastom Kɔlɔ ɛn Finish dɛn

Yu kin gi wayt, transparent, gold, silva, glos, mat ɛn tɛkstɔr matirial fɔ difrɛn kad dizayn ɛn vijual ifɛkt.

Prayvet-Lɛbul Pakɛj

Shit kɔnt, protɛktiv bag, print lɛbl, bɔks, katon ɛn distribyushɔn branding kin kɔstɔmayz fɔ ɔlsay kad-matirial program dɛn.

Printa ɛn Ink Kɔmpatibiliti

Inkjet printable PVC nɔto ɔlsay kɔmpitabl wit ɛvri dɛsktɔp inkjet printa. Fidin kapabiliti, ink kemistri, printhed kliarens ɛn midia sɛtin kin afɛkt printin pefɔmɛns.

• Print ɔl na di say we dɛn dɔn kɔt we dɛn dɔn no.

• Test sɔm midia sɛtin dɛn bifo bɔku bɔku prodakshɔn.

• Nɔ lod ink pasmak we kin mek i dray sloslo ɔ di surface tak.

• Alaw di sheet dɛn we dɛn print fɔ dray kɔmplit wan bifo dɛn stak ɔ lamin.

• Chek di kala dɛnsiti, fayn tɛks, barkɔd ridabiliti ɛn skin-tɔn riprodakshɔn.

• Test rub resistans ɛn kɔtin adheshon bifo layt asɛmbli.

Ɔdinari PVC kɔr shit we nɔ kɔt jɔs nɔ de gi rili absɔpshɔn fɔ standad wata-bɛs inkjɛt ink. Di wan dɛn we de bay we nid fɔ print dairekt inkjɛt fɔ sho wan gred we dɛn kɔt wit inkjɛt.

A4 Sheet Printing vs. Dairekt CR80 Kad Printin

PVC ID Kad Material Layer Struktur

Fes Layer we yu kin print

Di fes layt we yu kin print kin gɛt di kad foto, di kɔmni logo, tɛks, barɔd, QR kɔd, bakgrɔn dizayn ɛn di infɔmeshɔn we kin chenj.

PVC Kor Layer we yu kin yuz

Di PVC kor de gi most of di kad tiknes, opasiti en stiffness. Dɛn kin yuz wan ɔ mɔ kɔr layt fɔ rich di gej we dɛn nid we dɛn dɔn dɔn.

Bak Layer we yu kin print

Wan bak layt we yu kin print kin kɛr kɔntakt ditil, kɔndishɔn fɔ yuz, bakɔd, mɛmbaship infɔmeshɔn ɔ ɔda tin dɛn we dɛn alaw fɔ du wit di kad.

Transparent Protɛktiv Ɔvlay

Wan klia ɔvlay de protɛkt grafik dɛn we dɛn print frɔm rutin hanlin, mɔstɔ ɛn abrashɔn. Di ɔvlay fɔ bon kɔrɛkt wan to di kad strɔkchɔ we dɛn print we nɔ go trap di briz ɔ mek di pikchɔ chenj.

Opshɔnal Fɔnshɔnal Laya

Di prɔjek dɛn we dɛn alaw kin inklud magnɛtik-strayp ɔvlay, sayn panɛl, kɔntaktlɛs inlay ɔ ɔda tin we de wok. Dɛn strɔkchɔ ya nid spɛshal pozishɔn, laminɛshɔn ɛn kwaliti-kɔntrol prosidyuz.

Jɛnɛral PVC Kad Prodakshɔn Wokflɔ

1. Kɔnfɛm di Matirial Strukchɔ

Identify di frɔnt printabl sheet, bak printabl sheet, kɔr layt, ɔvlay, printabl sayd ɛn target finish-kad tik.

2. Pripia Ɔtorizayt Kad Atwok

Pripia di ɔtorizayt dizayn, foto dɛn, vayriɔbul infɔmeshɔn ɛn kɔt rɛjista mak dɛn akɔdin to di prodakshɔn layout.

3. Print di Kɔt Sɔfays

Print na di sayd we dɛn dɔn kɔt we dɛn dɔn no yuz validet printa, ink, rizɔlt ɛn midia sɛtin dɛn.

4. Alaw Kɔmplit Ink Dray

Alaw fɔ dray inof bifo yu stak, kolat ɔ lamin. If yu drɛy am kɔmplit wan, i kin mek di imej transfa, i kin smɛl ɔ i nɔ kin adheshon fayn ɔvlay.

5. Kɔlat ɛn Align di Layers

Align di front sheet, kor, bak sheet en ovalays. Kɔnfɛm di say we di pikchɔ de go ɛn avɔyd dɔst, finga prɛnt ɛn patikyula tin dɛn we dɔn trɔp.

6. Laminate Ɔnda Validɛt Kɔndishɔn

Aplay di validet tempɔret, prɛshɔn ɛn dwɛl tɛm fɔ di PVC strɔkchɔ ɛn laminating ikwipmɛnt we yu dɔn pik.

7. Kul Ɔnda Kɔntrol Prɛshɔn

Kontrol kol de εp fכ stebul di laminated sheet εn ridyus di wכping, bכbul, surface mak dεm εn shrinkage we dεn nכ kכntrol.

8. Kɔt ɔ Panch di Kad dɛn

Kɔt di laminated sheet insay di apruv CR80 ɔ kɔstɔmayz kad dimɛnshɔn yuz wan fayn panch, day ɔ kɔt sistɛm.

9. Inspek di Kad dɛn we dɛn dɔn dɔn

Inspek kad dimɛnshɔn, tik, flatnɛs, imej pozishɔn, edj kwaliti, laminɛshɔn bond, sɔfays dɛfɛkt ɛn barɔd ridabiliti.

Lamination ɛn Cooling Kɔnsidɛreshɔn dɛn

Lamination setin nɔ fɔ kɔpi frɔm difrɛn PVC matirial we dɛn nɔ tɛst. Rɛsin fɔmyulashɔn, shit tiknɛs, kɔtin, ɔvlay ɛn laminatɔ dizayn kin chenj di prɔsesin winda we dɛn nid.

• If di tɛmpracha pasmak, i kin mek di kɔlɔ chenj, i kin chenj, i kin mek i bɔbul, i kin mek di kɔtin pwɛl ɔ i kin mek i smɔl pasmak.

• if di tεmprachכ nכ go bכku i kin mek di fכs fכ fכm nכ kכmplit כ i kin mek di pεl trεnk wik.

• Prεshכn we nכ ivin kin mek tik vεryushכn εn sכfayz mak dεm.

• Dɔst ɔ fayv dɛn we dɔn trɔp kin stil de insay di kad we dɛn dɔn dɔn.

• If yu nɔ kɔmplit ink drɛy, i kin ambɔg di ɔvlay bonding.

• We yu nɔ kɔntrol am, i kin mek yu gɛt kad bɔw, kɔl ɔ dimɛnshɔnal instability.

• Lamineshɔn plet, pad ɛn rilis sɔfays fɔ klin ɛn fit fɔ di finish we dɛn nid.

CR80 Kad Sayz, Tiknɛs ɛn Flatnɛs

CR80 na di kɔmɔn kad fɔmat we dɛn kin yuz fɔ bɔku wokman, mɛmbaship, lɔyalti, ɔtel ɛn akses-kɔntrol kad dɛn. di dimεnshכn dεm we dεn finish na lεk 85.6 × 54 mm, εn wan tik we dεn kכmכn spεsifiket na lεk 0.76 mm כ 30 mil.

Dɛn fɔ pik di tik we di kad dɔn dɔn akɔdin to di printa we dɛn want fɔ print, di rida, di pɔsin we de ol am, di say we dɛn kin put di walet ɛn di tin dɛn we dɛn kin yuz fɔ handle di kad.

Kad bɔw ɛn wɔp kin mek di fidin mistek, print void ɛn po stak. Di las laminated kad fɔ evalyu afta i dɔn kol ɛn rich stebul rum kɔndishɔn.

Aplikeshɔn fɔ Inkjet Printable PVC Kad Shit dɛn

Di Wokman dɛn ID Kad dɛn

Krio ɔtorizayt wokman aydentifikeshɔn kad, wokples badge ɛn intanɛnt staf kad wit foto, nem, dipatmɛnt ɛn kɔmni branding.

Membaship Kad dɛn

Prodyuz pɔsnalayz kad fɔ jim, klab, salon, asosieshɔn, laybri ɛn savis ɔganayzeshɔn dɛn.

Loyalty ɛn Gift Kad dɛn

PVC we dɛn kin print kin sɔpɔt branded loyalty, riwɔd, gift ɛn prɔmoshɔnal kad fɔ ritayla dɛn, rɛstɔrant dɛn ɛn kɔstɔma program dɛn.

Badge dɛn fɔ di wan dɛn we de kam fɛn di ples

Dɛn kin mek ɔtorizayt visitɔ kad fɔ ɔfis, ɛgzibishin, kɔnfrɛns, faktri ɛn fasiliti dɛn we dɛn kin kɔntrol.

Studɛnt ɛn Laybri Kad dɛn

Skul dɛm, yunivasiti dɛm, trenin sɛnta dɛm ɛn laybri dɛm kin yuz pɔsnalayz kad fɔ ɔtorizayt aydentifikeshɔn ɛn mɛmbaship program dɛm.

Ɔtel ɛn Ɔspitaliti Kad dɛn

Dɛn kin evalyu di matirial fɔ ɔtel mɛmbaship kad, gɔst aydentifikeshɔn ɛn kɔmpitabl ɔtorizayt ki-kad strɔkchɔ.

Akses-Kɔntrol Kad dɛn

Ɔtorizayt akses-kad projɛkt dɛn kin nid magnɛtik strɛp, RFID ɔ smat-kad kɔmpɔnɛnt dɛn. Di matirial ɛn di layt strɔkchɔ fɔ mach wit di akses-kɔntrol teknɔlɔji we dɛn dɔn gri fɔ.

Ivent ɛn Promoshɔnal Kad dɛn

Yu kin yuz PVC kad fɔ ivin badge, branded kad, prɔmoshɔnal kampen ɛn ɔtorizayt tikɛt ɔ mɛmbaship program.

PVC vs. PETG ɛn Polikabɔnɛt Kad Matirial dɛn

Kastom PVC Kad Matirial Opshɔn dɛn

• A4, A5, A3, CR80 ɛn kɔstɔmayz dimɛnshɔn dɛn.

• Fes sheet dɛn we dɛn kin print, PVC kɔr sheet dɛn ɛn transparent ɔvlay dɛn.

• Inkjet kɔtin we gɛt wan sayd ɔ tu sayd.

• Kastom fes-shit, kor-shit ɛn ɔvlay tiknɛs.

• Wait, transparent, gold, silva ɛn kɔstɔmayt kɔlɔ dɛn.

• Glossy, mat, frosted ɛn ɛmbos sɔfays dɛn.

• Vɛjin, miks ɔ risaykul-kɔntinɛnt PVC opshɔn dɛn.

• Konvɛnshɔnal laminɛshɔn ɛn nɔ-laminɛshɔn matirial sistɛm dɛn.

• Magnɛtik-strayp ɔvlay ɔ inlay-kɔmpatibl strɔkchɔ fɔ ɔtorizayt prɔjɛkt dɛn.

• Kastom sheet kaunt, bag, bɔks, lɛbl ɛn prayvet-lɛbul pak.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• Shit lɔng, wit, skwea ɛn tik tolɛreshɔn.

• Surface flatness ɛn sheet-fidin pefɔmɛns.

• Wait kala, opasiti ɛn batch kɔnsistɛns.

• Ink absɔpshɔn, drying tɛm ɛn kɔlɔ density.

• Fayn tɛks, foto ɛn barɔd riprodakshɔn.

• Kotin adheshon ɛn skrach rɛsistɛns.

• Layer rejista ɛn lamination alaynɛshɔn.

• Lamination peel trɛnk ɛn delamination rɛsistɛns.

• Finished-kad dimɛnshɔn ɛn totɛl tik.

• Kad bow, flatnɛs ɛn kol stebiliti.

• Cutting edge, burr, kona rayus ɛn sɔfayz kɔndishɔn.

• Printa fidin ɛn kad-rida kɔmpatibiliti usay i apɔynt.

Instrɔkshɔn fɔ Stɔr ɛn Handling

• Kip di sheet dɛn we dɛn sial insay dɛn ɔrijinal pak we nɔ gɛt mɔstɔ te yu yuz dɛn.

• Stɔr di tin na say we klin ɛn dray insay os.

• Nɔ gɛt dairekt san layt, ɔt pasmak, ay humidity ɛn tɛmpracha chenj kwik kwik wan.

• Stɔr sheet dɛn flat ɛn avɔyd lod dɛn we nɔ ivin we kin mek difɔmeshɔn.

• Handle di kotin we yu kin print wit klin glɔv.

• Fɔ mek di finga prɛnt, ɔyl, dɔst ɛn fayv nɔ kɔntakt di say dɛn we dɛn kin print ɔ we dɛn kin laminate.

• Alaw kol matirial fɔ rich di tɛmpracha na di printin rum bifo yu opin di paket we dɛn dɔn sial.

• Kip sheet dɛn fa frɔm sɔlvɛnt ɛn agresiv kemikal dɛn.

Infɔmeshɔn we yu nid fɔ mek yu gɛt PVC Kad Shit Kɔt

• Di kayn prɔdak we dɛn nid: sheet we dɛn kin print, kɔr, ɔvlay, kit, matirial we nɔ gɛt laminɛshɔn ɔ blank kad we dɔn dɔn.

• A4, A5, A3, CR80 ɔ kɔstɔm dimɛnshɔn dɛn.

• Tiknes fɔ ɛni layt ɛn target finish-kad tik.

• Wan-sayd ɔ tu-sayd kɔtin we dɛn kin print.

• Wait, transparent, gold, silva ɔ kɔstɔmayt kɔlɔ.

• Glos, mat, frɔst ɔ ɛmbos sɔfays.

• Printa brand, model ɛn we fɔ gi shit.

• Day-based, pigment-based ɔ ɔda kayn ink.

• Laminator tayp ɛn kɔrɛnt matirial strɔkchɔ.

• Kad aplikeshɔn we dɛn nid ɛn di tin dɛn we dɛn alaw fɔ du.

• Trayal kwantiti, fɔs ɔda ɛn ɛni ia dimand.

• Bag, lɛbl, bɔks, katon ɛn prayvet-lɛbul pak we dɛn nid.

• Di kɔntri we dɛn de go, di we aw dɛn de ship am ɛn di dɔkyumɛnt dɛn we dɛn nid.

Send Yu PVC Kad Matirial Rikwaymɛnt

Pak ɛn Shipin

Protektiv pak: Dɛn kin sial sheet dɛn we dɛn kin print insay bag dɛn we nɔ de mek wata ɛn pak dɛn insay bɔks dɛn we nɔ gɛt wan bɔt fɔ mek dɔst, mɔstɔ, bɛnd ɛn ed damej nɔ bɔku.

Shit kɔnt: Yu kin kɔstɔmayz di nɔmba fɔ di sheet ɔ sɛt dɛn fɔ ɛni paket akɔdin to di tik, wetin di distribyushɔn nid ɛn di rital pak.

Kastom branding: Lebul, bag, bɔks ɛn katon kin gɛt di pɔsin we bay in logo, di prɔdak kɔd, tik, instrɔkshɔn dɛn we yu kin print na di sayd ɛn bakɔd.

Ekspɔt pak: Dɛn kin sikyurɛt bɔku katon dɛn pan palet fɔ intanashɔnal ɛya ɔ si transpɔt.

Di we dɛn fɔ ship: Yu kin ship sampul ɛn smɔl ɔda tin dɛn bay ɛkspɛs kɔriɔ. Yu kin ship bɔku ɔda tin dɛn bay plen ɔ si.

Sɛtifiket ɛn Kwaliti Dokumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt di SGS ripɔt dɛn we dɛn kin yuz, di dɔkyumɛnt dɛn we gɛt fɔ du wit RoHS ɛn di ISO kwaliti-mɛnejmɛnt sɛtifiket dɛn.

Di wan dɛn we de bay fɔ kɔnfɔm us dɔkyumɛnt dɛn we de aplay to di ɛksaktɔ PVC rɛsin, kɔtin we dɛn kin print, kɔlɔ, risaykul-kɔntinɛnt lɛvɛl, tik ɛn prodakshɔn spɛsifikɛshɔn.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim standad. I nɔ de pruv insɛf se ɛvri PVC kad matirial de fala wan patikyula kemikal, envayrɔmɛnt, sikyɔriti ɔ finish-kad rikwaymɛnt.

Wetin Mek Yu Pik HSQY as Yu PVC Kad Matirial Splaya?

HSQY Plastik Grup de saplae inkjet printabl PVC sheet, PVC kad kor matirial, transparent koted ovalay, blank PVC kad en oda rigid plastic sheet to intanashɔnal B2B kɔstɔma dɛn.

• A4, A5, A3, CR80 ɛn kɔstɔmayz dimɛnshɔn dɛn.

• Shit dɛn we dɛn kin print, kad kɔr, ɔvlay ɛn kɔmplit matirial sɛt dɛn.

• Singl-sayd ɛn tu-sayd inkjet-kɔt opshɔn dɛn.

• Standart 0.76mm finish-kad strɔkchɔ dɛn.

• Wait, transparent, gold ɛn silva matirial dɛn.

• Glossy, mat ɛn kɔstɔmayt sɔfays finish.

• Konvɛnshɔnal lamination ɛn instant-kad matirial opshɔn dɛn.

• Sampul fɔ printa, ink, laminatɔ ɛn kɔt tray.

• Kastomized pakej ɛn prayvet-lɛbul saplai.

• Bulk prodakshɔn sɔpɔt fɔ kad manifakta ɛn distribyushɔn.

HSQY rikɔmɛnd fɔ kɔmplit printa fidin, ink drying, lamination, kol, kɔt ɛn finish-kad tɛst bifo yu apruv wan bɔlk prodakshɔn spɛsifikɛshɔn.

Kontakt HSQY fɔ Sampul ɛn Prayz

HSQY Globɛl Ɛgzibishin dɛn

HSQY Plastik Grup de prɛzɛnt PVC kad matirial, plastic sheet dɛn we dɛn kin print, pak prodak ɛn kɔstɔmayz polima sɔlvishɔn na intanashɔnal plastic ɛn pak ɛgzibishin.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Inkjet PVC ID Kad Shit dɛn

Wetin na PVC ID kad sheet we dɛn kin print wit A4 inkjet?

Na A4-sayz PVC matirial wit wan surface coating we dɛn divɛlɔp fɔ kɔmpitabl inkjet printin. Dɛn kin jɔyn di sheet dɛn we dɛn print wit PVC kɔr ɛn ɔvlay layers, laminated ɛn kɔt dɛn insay plastic kad dɛn we dɔn dɔn.

A4 PVC kad matirial na di sem wit CR80 blank kad?

No. A4 matirial de print as sheet ɛn nɔmal wan i nid layt asɛmbli, lamineshɔn ɛn kɔt. Wan CR80 blank kad dɔn ɔlrɛdi kɔt to finish-kad dimɛnshɔn ɛn i nid fɔ gɛt kɔmpitabl kad printa.

Yu tink se dɛn kin print ɔdinari PVC sheet wit inkjet printa?

Ɔdinari PVC we nɔ kɔt jɔs nɔ de absɔb standad inkjɛt ink fayn fayn wan. Yuz wan spɛshal kɔted inkjet-printable PVC gred.

Us printa dɛn we kɔmpitabl wit A4 inkjet PVC sheet dɛn?

Kɔmpatibiliti dipen pan di printa mɔdel, fidin pat, maksimal midia tiknes, ink kemistri ɛn shit kɔtin. Dɛn fɔ tɛst di rayt printa bifo dɛn ɔda bɔku bɔku wan.

Yu tink se dɛn kin print di PVC sheet dɛn na ɔl tu di say dɛn?

Yɛs. Dɛn kin gɛt gred dɛn we gɛt inkjet we gɛt tu sayd. Kɔnfɛm se dɛn dɔn kɔt ɔl tu di say dɛn bifo yu print.

Yu tink se dɛn kin yuz day ɛn pigmɛnt ink dɛn ɔl tu?

Di kɔmpatibiliti dipen pan di kɔtin ɛn di printa. Test ink absכpshכn, dryin, kכla dεnsiti, rכb rεsistεns εn laminεshכn pεrformεns wit di aktual ink.

Wetin na di standad CR80 kad saiz?

di kכmכn CR80 rεfrεns saiz na lεk 85.6 × 54 mm. wan tik we dεn kin yuz fכ finish na lεk 0.76 mm כ 30 mil.

Us layers dɛn kin yuz fɔ mek 0.76mm PVC kad?

Wan rɛfrɛns strɔkchɔ de yuz tu 0.08mm transparent ɔvlay ɛn tu 0.30mm PVC layers. Wan ɔda kɔmɔn strɔkchɔ de yuz frɔnt ɛn bak sheet dɛn we dɛn kin print wit wan tik midul kɔr.

Yu tink se A4 inkjet PVC sheet dɛn nid fɔ lamin?

Konvɛnshɔnal malti-layer A4 kad sistem dɛn nɔmal fɔ nid lamination. Nɔn-laminɛshɔn ɔ instant-kad sistɛm dɛn de bak, bɔt dɛn de yuz difrɛn bonding strɔkchɔ ɛn prɔses.

Us ikwipmɛnt dɛn nid fɔ mek kad frɔm A4 PVC sheet dɛn?

Wan tipik prɔses kin yuz kɔmpitabl inkjɛt printa, kad-dizayn softwe, drying eria, laminator, kol plet, kad panch ɔ kɔta ɛn inspekshɔn tul dɛn.

Us laminɛshɔn tɛmpracha fɔ yuz?

Di kɔrɛkt tɛmpracha dipen pan di PVC fɔmyulashɔn, layt tik, ɔvlay kɔtin ɛn laminatɔ. Yuz di spɔlayt in prɔsesin rɛkɛmɔndeshɔn ɛn kɔmplit prodakshɔn trayal dɛn instead fɔ aplay wan yunivasal tɛmpracha.

Wetin mek laminated PVC kad dɛn kin wɔp?

Warping kin kɔmɔt frɔm di tik we di layt tik nɔ balans, di ɔt pasmak, prɛshɔn we nɔ ivin, di kɔrɛkt we aw di matirial de ɔriɛnteshɔn ɔ di kol we nɔ de kɔntrol.

Wetin mek di ink kin smɛl we dɛn de lamin?

Di tin dɛn we kin mek i apin na ink we nɔ kɔmpitabl, ink volyum we pasmak, we nɔ de drɛy fayn, say we dɛn nɔ kin print kɔrɛkt wan ɔ ɔvlay ɛn lamineshɔn kɔndishɔn we nɔ kɔmpitabl.

Wetin mek di ɔvlay de separet frɔm di kad?

Delamination kin kɔmɔt frɔm inɔf ɔt ɔ prɛshɔn, kɔntaminɛt sɔfays, layers we nɔ kɔmpitabl, ink pasmak, inkɔrɛkt kol ɔ po ɔvlay adheshon.

Yu tink se dɛn kin ad magnɛtik strɛp dɛn?

Magnɛtik-strayp ɔvlayz kin evalyu fɔ ɔtorizayt prɔjɛkt dɛn. Strip tayp, pozishɔn, kɔstɔm, ɛnkɔda kɔmpatibiliti ɛn laminɛshɔn strɔkchɔ fɔ spɛsifa.

Yu tink se dɛn kin ad RFID ɔ smart-kad inlay?

Ɔtorizayt RFID ɛn smat-kad projɛkt dɛn nid spɛshal inlay, kɔntrol layt strɔkchɔ, prɛsis pozishɔn ɛn validet laminɛshɔn kɔndishɔn.

Yu tink se dɛn kin yuz PVC we dɛn dɔn risaykul?

Risaykul-kɔntinɛnt ɔ miks-matirial PVC kin de fɔ sɔm aplikeshɔn dɛn. Dɛn fɔ tɛst aw i luk, aw i klin, aw i print, aw i lamin ɛn aw di kad we dɔn dɔn fɔ lɔng tɛm.

Yu tink se dɛn kin yuz PVC kad dɛn bak?

Risaykul akseptans dipen pan lokal kɔlɛkshɔn sistɛm, kad saiz, ɔvlay, magnɛtik strɛp, ɛmbaded kɔmpɔnɛnt ɛn rijinal PVC risaykul infrastukchɔ.

Yu tink se sampul dɛn de?

Stok sɛmpul dɛn kin de fɔ tɛst shit fidin, ink absɔpshɔn, drying, lamination, bondin ɛn kad kɔt. Nɔmal wan na di pɔsin we bay di tin kin pe fɔ di freyt we dɛn kin kɛr go.

Wetin na di MOQ?

Di standad prodakt paramita sho wan MOQ we na aprɔksimatli 1000kg. Speshal matirial kit, kɔlɔ, kɔtin ɔ prayvet-lɛbul paket kin yuz difrɛn MOQ.

Wetin na di prodakshɔn lida tɛm?

Tipik prodakshɔn kin tek lɛk 15-20 wok dez afta dɛn dɔn kɔnfyus di strɔkchɔ, kwantiti, pak ɛn pe.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di prɔdak tayp, shit saiz, layt tik, finish-kad tik, sayd dɛn we yu kin print, printa mɔdel, ink tayp, lamination prɔses, kwantiti, pak ɛn ples fɔ go.

Get wan Kastom PVC Kad Sheet Kot

Bɔt HSQY Plastik Grup

Changzhou Huisu Qinye Plastic Group Co., Ltd. de saplae inkjet printabl PVC sheet, PVC kad kor matirial, kot ovalay film, blank PVC kad en oda plastic-shit prodak fo intanashona B2B kastoma.

HSQY de sɔpɔt kad manifakta dɛn, printin shɔp dɛn, ɔfis-saplai distribyushɔn, badge prodyusɔ ɛn aydentifikeshɔn-sɔlushɔn prɔvayda dɛn wit kɔstɔm saiz, tiknɛs, kɔtin, kɔlɔ, sɛmpul, tɛknikal dɔkyumɛnt, prayvet-lɛbul pak ɛn bɔlk prodakshɔn.

Rikwest fɔ Kot ɛn Sampul