A4 Size Inkjet Print PVC ID Karti dilancogo sɛbɛnw Fɛnw

A4 Inkjet Printable PVC ID karti sɛbɛnw ye mun ye?

A4 inkjet printable PVC ID card sɛbɛnfura min bɛ kɛ s ye plastiki fɛnw ye minnu dilannen don kɛrɛnkɛrɛnnenya la, minnu bɛ kɛ ka baarakɛlaw ka kartiw dilan minnu bɛ kɛ mɔgɔ yɛrɛ ta ye, tɔndenw ka kartiw, kantigiya kartiw, taamakɛlaw ka badgew, kalandenw ka kartiw, lotɛli kartiw, don-kɔlɔsili kartiw ani laseli plastiki kartiw.

A tɛ i n’a fɔ PVC karti kɔnɔna gansan min ma datugu, enki min bɛ se ka sɛbɛn PVC sɛbɛnfura min bɛ kɛ o ɲɛda datugulen don min dabɔra ka enki enki min bɛ bɛn ɲɔgɔn ma, o sɔrɔ. O finimugu bɛ se ka tintiri minɛcogo ɲɛ, ja ɲɛfɔli, a kulɛri hakɛ ani a jalen kɛcogo ɲɛ ni a kɛra ni sɛbɛnnikɛlan ni tintiri sira ɲuman ye.

HSQY bɛ A4, A5, CR80 ani PVC karti fɛnw dilan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, i n’a fɔ ɲɛda min bɛ se ka sɛbɛn ni inkjet ye sɛbɛnfura min bɛ kɛ s, PVC karti kɔnɔna sɛbɛnfura min bɛ kɛ s, dacogo jɛlenw, karti fɛnw minnu tɛ lamini ye ani karti lankolon dafalenw PVC .

A4 printable sɛbɛnfura min bɛ kɛ s bɛ sɛbɛn cogoya la ni sɛbɛnfura min bɛ kɛ -fed inkjet printer ye min bɛ bɛn a ma, o kɔfɛ u bɛ fara ɲɔgɔn kan ni karti kɔnɔna ni overlay layers ye. sɛbɛnfura min bɛ kɛ lajɛlen bɛ lamini, ka nɛnɛ ka tigɛ ka kɛ karti dafalenw ye.

CR80 karti lankolonw dafalenw bɛ baara kɛ ni baarakɛcogo wɛrɛ ye min bɛ kɛ ka baara kɛ ni fɛn dilanni ye. U ka kan ka don karti sɛbɛnnikɛlan kɔnɔ min bɛ taa karti la, min bɛ taa ni a ye kokura walima min bɛ se ka baara kɛ ni a ye, min bɛ sɔn karti kɔnɔfɛnw ma, a bonya, a bonya ani a sanfɛla jɔcogo ma.

Imprimante ka baarakɛcogo tɛ diɲɛ bɛɛ ta ye. Sannikɛlaw ka kan ka sɛbɛnnikɛlan taamasiyɛn, sɛbɛnnikɛlan modɛli, tintiri suguya, sɛbɛnfura min bɛ kɛ -dumuni kɛcogo, kunnafonidilanw girinya hakɛ maksimali, lamini minɛnw ani karti dafalen jɔcogo wajibiyalen di sani u ka komandi kɛ.

Fɛn minnu dabɔra gɔfɛrɛnaman ka seereyaw kama, banki kartiw, wari sarali kartiw, lasesɛbɛnw walima mɔgɔyasɛbɛn wɛrɛw minnu bɛ sariya kɔnɔ, olu ka kan ka san ani ka baara kɛ ni olu ye dɔrɔn jɛkulu yamaruyalenw fɛ minnu bɛ baara kɛ lakana ni sariya labatoli siratigɛ la.

Demand PVC Karti sɛbɛn sɔngɔko    Sɛbɛnni kɛcogo misaliw ɲini

Inkjet Printable PVC ID Karti sɛbɛn Jaw

A4 Inkjet PVC ID karti sɛbɛn ɲɛfɔli

sɛbɛnfura min bɛ kɛ laban janya, a dacogo suguya, a fan min bɛ se ka sɛbɛn, a sanfɛla fini, a layini faralen ɲɔgɔn kan, karti hakɛw, muɲuli ani a foroko ka kan ka dafa ni misali dabɔlen ye ani fɛn dilannenw ɲɛfɔli sɛbɛnnen fɛ.

PVC ID karti dilanni minɛn suguyaw

PVC karti minɛnw bɛ sɔrɔ cogo caman na. Ni aw ye fɛn suguya jugu sugandi, o bɛ se ka kɛ sababu ye ka balo gɛlɛyaw lase mɔgɔ ma, ka enki nɔrɔcogo jugu lase mɔgɔ ma, ka lamini barikama walima karti dafalen janya jugu lase mɔgɔ ma.

Common 0,76mm PVC Karti layɛrɛ jɔcogo

Karti 0,76mm dafalen bɛ se ka dilan ni layɛrɛ faralenw ye minnu tɛ kelen ye. A jɔcogo ɲuman bɛ bɔ ni sɛbɛnnikɛlan fana bɛ baara kɛ i n’a fɔ kɔnɔna, ni dakun danfaralen bɛ kɛ ani ni layiniw bɛ ɲɔgɔn sɔrɔ cogo min na lamini waati.

Layɛrɛ tɔgɔlama janya tɛ bɛn tuma bɛɛ karti laban janya tigitigi ma lamini kɔfɛ. Degun, finimugu janya, fɛnw dɔgɔyali ani nɛnɛ tansiyɔn bɛ se ka nɔ bila a laban na.

Inkjet Printable PVC Karti sɛbɛnw ka baarakɛcogo jɔnjɔnw

Surface Coating min bɛ se ka kɛ ni encre ye

A yɔrɔ min datugulen don, o dabɔra walasa ka enki enki min bɛ bɛn ɲɔgɔn ma, o jibɔcogo ni u minɛnicogo ɲɛ. O bɛ dɛmɛ ka dɔ bɔ biɲɛw bɔli la, nɔgɔ bɔli la ani tintin jɛnsɛnni min tɛ kɔlɔsi ni i y’a suma ni PVC gansanw ye minnu ma datugu.

Personalisation (Personnalisation) min ka bon kosɛbɛ

sɛbɛnfura min bɛ kɛ , enki ni sɛbɛnnikɛlan faralen ɲɔgɔn kan cogo bɛnnen na, o bɛ se ka fotow, logow, sɛbɛnniw, QR kodew, barɔdiw ani karti tigi ka kunnafoniw caman bɔ.

Sɛbɛnni min bɛ kɛ ni fan kelen walima fila ye

Fɛn minnu bɛ se ka sɛbɛn, olu bɛ se ka kɛ fan kelen walima fan fila bɛɛ la. A yɔrɔ min datugulen don, o ka kan ka dɔn ka jɛya sani a ka sɛbɛnni kɛ ani ka layɛrɛ lajɛ.

Stable Sheet Flatness (Fɔli sabatili).

Flatness kɔrɔsilen ni squareness bɛ dɛmɛ don sɛbɛnfura min bɛ kɛ baloli dannayalen na, seko ni dɔnko sɛbɛnni, layɛrɛ sinsinni ani karti tigɛ.

Kɔrɔsililen Thickness

Layɛrɛ janya basigilen bɛ karti dilannikɛlaw dɛmɛ ka karti jateminɛnan 0,76mm dafalen kɔlɔsi ani ka dɔ bɔ fɛn dilanni kuluw ni ɲɔgɔn cɛ.

Laminasiyɔn bɛnkan

PVC layɛrɛ minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka ɲɔgɔn sɔrɔ funteni, degun ani sigi waati cogoyaw la minnu sɛgɛsɛgɛra walasa ka karti farikolo kelen dilan.

Kulɛriw ni finiw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Fɛn finmanw, fɛn jɛlenw, sanu, warijɛ, fɛn manamananan, fɛn nɔgɔlenw ani fɛn dilannenw bɛ se ka dilan karti dilanni ni yecogo suguya wɛrɛw kama.

Forobaciyɛn min bɛ wele ko Privé-Label

Sɛbɛnw jate, lakanabagaw, sɛbɛnw, kɛsu, kartɔnw ani tilabagaw ka taamasiyɛnw bɛ se ka kɛ ka kɛɲɛ ni karti-fɛnw feereli porogaramuw ye.

Imprimante ni encre bɛ se ka baara kɛ ɲɔgɔn fɛ

Inkjet printable PVC tɛ se ka kɛ diɲɛ bɛɛ kɔnɔ ni desktop inkjet imprimante bɛɛ ye. Dumuni seko, enki chimie, sɛbɛnnikɛlan kunkolo bɔli ani kunnafonidilanw sigicogo bɛ se ka nɔ bila sɛbɛnni kɛcogo la.

• Aw bɛ sɛbɛnni kɛ dɔrɔn yɔrɔ dacogo dɔnnen kan.

• Aw bɛ kunnafonidilanw sigicogo caman kɔrɔbɔ sani u ka caman dilan.

• Aw bɛ aw yɛrɛ tanga tintin doni kojugu ma min bɛ kɛ sababu ye ka a ja dɔɔni dɔɔni walima ka a sanfɛla sɔgɔ.

• Aw bɛ a to sɛbɛnfura min bɛ kɛ sɛbɛnnenw ka ja pewu sani u ka u dalajɛ walima ka u lamini.

• Aw ye kulɛriw hakɛ lajɛ, sɛbɛnni ɲumanw, barɔdi kalanni ani farikolo-ɲɛnajɛw lasegincogo.

• Aw bɛ rub resistance ni coating adhesion kɔrɔbɔ sani aw ka layɛrɛ lajɛ.

PVC core sɛbɛnfura min bɛ kɛ core gansan min ma datugu, a ka c’a la, o tɛ fɛn min bɛ se ka da a kan, o tɛ se ka kɛ ni inkjet ink standard ye min bɛ bɔ ji la. Sannikɛlaw minnu mago bɛ sɛbɛnnikɛlan tilennen na, olu ka kan ka grade dɔ jira min bɛ kɛ ni tintiri ye.

A4 sɛbɛnw bɔli ni CR80 karti sɛbɛnni tilennen ye

PVC ID Karti Materiel Layer Structure

Face Layer min bɛ se ka imprimer

Ɲɛda layɛrɛ min bɛ se ka sɛbɛn, o bɛ karti foto, sosiyete logo, sɛbɛnni, barɔdi, QR code, kɔkanna dilancogo ani kunnafoni caman sɔrɔ.

PVC Layidu koloma

PVC core bɛ karti janya, opacity ani stiffness fanba di. Kori layɛrɛ kelen walima caman bɛ se ka kɛ walasa ka se jateminɛnan dafalen wajibiyalen ma.

Layer kɔkanna min bɛ se ka imprimer

Kɔfɛla min bɛ se ka sɛbɛn, o bɛ se ka kɛ ni mɔgɔw ka kunnafoniw ye, baarakɛcogo sariyaw, barɔdi, tɔndenw ka kunnafoniw walima karti kɔnɔfɛn wɛrɛw minnu yamaruyara.

Transparent Protective Overlay (Lakanali dakun jɛlen).

Datugulan jɛlen bɛ ja sɛbɛnnenw lakana ka bɔ u minɛcogo kɔrɔ la, u ka nɔgɔ ani u ka sɔgɔsɔgɔ. O datugulan ka kan ka siri ka ɲɛ karti sɛbɛnnen jɔcogo la k’a sɔrɔ a ma fiɲɛ minɛ walima ka ja tiɲɛ.

Layer Functionnel (Layer Functionnel) min bɛ se ka kɛ

Porozɛ minnu yamaruyara, olu bɛ se ka kɛ magnetic-stripe overlay, signature panel, contactless inlay walima baarakɛfɛn wɛrɛ ye. O jɔli ninnu bɛ jɔyɔrɔ kɛrɛnkɛrɛnnenw de wajibiya, laminini ani jogoɲini kɛcogo kɛrɛnkɛrɛnnenw.

General PVC Kartiw dilanni baarakɛcogo

1. Aw bɛ fɛnw sigicogo dafa

Fɛn min bɛ se ka sɛbɛn ɲɛfɛ sɛbɛnfura min bɛ kɛ , kɔfɛ sɛbɛnnikɛlan sɛbɛnfura min bɛ kɛ , core layer, overlay, printable sides ani target finished-card thickness dɔn.

2. Karti ja labɛn min yamaruyara

Aw bɛ dilancogo yamaruyalen labɛn, fotow, kunnafoni caman caman cili ani tɔgɔsɛbɛnni taamasiyɛnw tigɛ ka kɛɲɛ ni a dilanni cogoya ye.

3. Aw bɛ Surface Coated (yɔrɔ datugulen) sɛbɛn

Aw bɛ sɛbɛnni kɛ fan dacogo dɔnnen na ni sɛbɛnnikɛlan, enki, ɲɛfɔli ani kunnafonidilanw sigicogo sɛgɛsɛgɛlenw ye.

4. Aw bɛ a to enki ka ja pewu

Aw bɛ a to a ka ja ka ɲɛ sani aw ka a dalajɛ, ka a dalajɛ walima ka a lamini. Jali dafalen tɛ se ka kɛ sababu ye ka ja caman cili, ka u mugu walima ka u datugu ka ɲɛ.

5. Aw bɛ Layɛrɛw fara ɲɔgɔn kan ani k’u labɛn

Aw bɛ ɲɛfɛ sɛbɛnfura min bɛ kɛ , core, kɔ sɛbɛnfura min bɛ kɛ ani overlays labɛn. Aw bɛ ja ɲɛminɛcogo dafa ani ka aw yɛrɛ tanga buguri, bolokɔniw ani fɛn minnu sirilen don.

6. Laminati bɛ kɛ cogo la min bɛ se ka kɛ

Aw bɛ funteni, degun ani sigi waati sɛgɛsɛgɛlenw kɛ PVC sigicogo sugandilenw ni lamini minɛnw na.

7. Aw bɛ nɛnɛ ni tansiyɔn kɔrɔsilen ye

Nɛnɛ min bɛ kɔrɔsi, o bɛ dɛmɛ ka sɛbɛnfura min bɛ kɛ lamininen sabati ani ka dɔ bɔ warping, bubbles, surface marks ani uncontrolled shrinkage.

8. Aw bɛ Kartiw tigɛ walima ka u sɔgɔ

Aw bɛ sɛbɛnfura min bɛ kɛ lamininen tigɛ ka don CR80 dafalen na walima karti hakɛw la minnu bɛ kɛ ka kɛɲɛ ni aw sago ye ni punch, die walima tigɛcogo bɛnnen ye.

9. Aw bɛ Karti dafalenw sɛgɛsɛgɛ

Aw bɛ karti bonya, a bonya, a flakɛ, ja jɔyɔrɔ, a dakun cogoya, a lamini sirili, a sanfɛla dɛsɛw ani a barɔdi kalanni sɛgɛsɛgɛ.

Lamination ani Cooling jateminɛw

Lamini sigicogo man kan ka kopi kɛ ka bɔ PVC fɛn wɛrɛ la ni kɔrɔbɔli ma kɛ. Resin dilanni, sɛbɛnfura min bɛ kɛ a bonya, a dacogo, a dacogo ani a laminatɛri dilanni bɛ se ka baarakɛcogo finɛtiri wajibiyalen Changer.

• Funteni kojugu bɛ se ka kɛ sababu ye ka a ɲɛ wuli, ka a wuli, ka a bugun, ka finimugu tiɲɛ walima ka a dɔgɔya kojugu.

• Funteni dafalen tɛ se ka kɛ sababu ye ka fusili dafalen kɛ walima ka a ɲɛkisɛ fanga dɔgɔya.

• Degun min tɛ kelen ye, o bɛ se ka kɛ sababu ye ka a bonya ɲɔgɔn falen falen ani ka kɛ sababu ye ka dugukolo yɔrɔ taamasiɲɛw kɛ.

• Bugun walima fiɲɛ minnu sirilen don, olu bɛ se ka to ka ye karti dafalen kɔnɔ.

• Enki jalen dafabali bɛ se ka kɛ sababu ye ka fɛnw sirili bali.

• Nɛnɛ min ma kɔrɔsi, o bɛ se ka kɛ sababu ye ka karti bow, curl walima dimensional instability lase.

• Lamini platiw, pads ani release surfaces ka kan ka saniya ani ka bɛn fini wajibiyalen ma.

CR80 Karti bonya, a bonya ani a flakɛ

CR80 ye karti cogoya ye min bɛ kɛ ka caya baarakɛlaw, tɔndenw, kantigiya, lotɛli ani don-kɔlɔsili karti caman na. A janya dafalenw bɛ Taa milimɛtɛrɛ 85,6 × 54 ɲɔgɔn na, wa a janya min bɛ Fɔ ka caya, o bɛ Taa milimɛtɛrɛ 0,76 walima milimɛtɛrɛ 30 ɲɔgɔn na.

Karti dafalenw janya ka kan ka sugandi ka kɛɲɛ ni sɛbɛnnikɛlan, kalanbaga, minɛn, waribɔlan ani karti minɛminɛn laɲinitaw ye.

Karti bow ni warping bɛ se ka kɛ sababu ye ka balo fili, ka sɛbɛnni kɛ yɔrɔ la ani ka stacking jugu. Karti lamininen laban ka kan ka jateminɛ a nɛnɛnen kɔfɛ ani a sera so cogoya sabatilenw ma.

Inkjet Printable PVC Karti sɛbɛnw baarakɛcogo

Baarakɛlaw ka ID Kartiw

Baarakɛlaw ka dantigɛlisɛbɛnw dilan minnu yamaruyara, baarakɛyɔrɔ badgew ani baarakɛlaw kɔnɔna kartiw ni fotow, tɔgɔw, baarakɛyɔrɔw ani sosiyete taamasiyɛnw ye.

Mɔgɔw ​​ka kartiw

Ka kartiw dilan minnu bɛ kɛ mɔgɔ yɛrɛ ye farikoloɲɛnajɛyɔrɔw, kuluw, salonw, tɔnw, gafemarayɔrɔw ani baarakɛjɛkuluw ye.

Kantigiya ni kado kartiw

Printable PVC bɛ kantigiya, sara, kado ani laseli kartiw dɛmɛ minnu bɛ kɛ ni taamasiyɛn ye feerekɛlaw, dumunikɛyɔrɔw ani kiliyanw ka porogaramuw ye.

Dunanw ka Badgew

Viziti karti minnu yamaruyara, olu bɛ se ka dilan birow kama, ɲɛjiraliw, lajɛbaw, iziniw ani yɔrɔw kama minnu bɛ kɔlɔsi.

Kalandenw ni gafemarayɔrɔ kartiw

Lakɔlisow, inivɛrisitew, kalansobaw ani gafemarayɔrɔw bɛ se ka baara kɛ ni kartiw ye minnu bɛ kɛ mɔgɔ yɛrɛ ta ye, walasa ka u yɛrɛ dɔn ani ka kɛ tɔndenw ka porogaramuw ye minnu yamaruyara.

Lotɛli ni jatigila kartiw

Fɛn minnu bɛ kɛ, olu bɛ se ka jateminɛ lotɛli kɔnɔmɔgɔw ka kartiw kama, dunanw tɔgɔlasɛbɛnw ani key-card jɔcogo yamaruyalenw na minnu bɛ bɛn ɲɔgɔn ma.

Karti minnu bɛ doncogo-kɔlɔsili kɛ

Porozɛ minnu yamaruyara ka don kartiw la, olu bɛ se ka kɛ sababu ye ka magnetic stripe, RFID walima smart-card yɔrɔw de wajibiya. Fɛnɲɛnɛma ni layɛrɛ jɔcogo ka kan ka bɛn ni doncogo-kɔlɔsili fɛɛrɛ ye min dagalen don.

Kow ni Laseli Kartiw

PVC kartiw bɛ se ka kɛ ko kɛlenw badgew ye, kartiw taamasiyɛnw, kanpaɲiw laseli ani tikiti walima tɔndenw ka porogaramuw minnu yamaruyara.

PVC ni PETG ani Polikarbonati karti fɛnw

Custom PVC Karti Materiel Sugandili

• A4, A5, A3, CR80 ani hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Ɲɛda min bɛ se ka sɛbɛn sɛbɛnfura min bɛ kɛ s, PVC core sɛbɛnfura min bɛ kɛ s ani overlays transparents.

• Inkjet dacogo min bɛ kɛ fan kelen walima fan fila fɛ.

• Laada ɲɛda- sɛbɛnfura min bɛ kɛ , core- sɛbɛnfura min bɛ kɛ ani overlay thickness.

• Kulɛri finman, jɛlen, sanu, warijɛ ani kulɛriw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Surfaces glossy, matte, frosted ani embossed.

• Npogotiginin, ɲagaminen walima fɛn wɛrɛw-kɔnɔkow PVC sugandiliw.

• Lamination conventionnelle ani non-lamination materiel systems.

• Magnɛtiki-stripe overlays walima inlay-compatible structures ka ɲɛsin porozew ma minnu yamaruyara.

• Ladamu sɛbɛnfura min bɛ kɛ jatew, bɔrɔw, kɛsu, labeliw ani mɔgɔ kelen-kelen ka pakew.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• Sɛbɛn janya, a bonya, a kɛnɛ ani a bonya muɲuni.

• Surface flatness ani sɛbɛnfura min bɛ kɛ -dumuni kɛcogo.

• Kulɛri finman, opacity ani batch consistance.

• Enki minɛni, a jalen waati ani a kulɛri hakɛ.

• Sɛbɛnni ɲumanw, foto ani barɔdi lasegincogo.

• Coating adhesion ani scratch resistance.

• Layɛrɛ sɛbɛnni ani lamination alignment.

• Lamination peel fanga ani delamination resistance.

• Finished-card dimensions ani a janya bɛɛ lajɛlen.

• Karti bow, flakɛli ani nɛnɛ sabatili.

• Tigɛda, burr, nkɔni radius ani surface condition.

• Imprimante balocogo ani karti-kalanbaga ka baarakɛcogo bɛ se ka kɛ yɔrɔ min na.

A maracogo ni a minɛcogo cikanw

• Aw bɛ sɛbɛnfura min bɛ kɛ s datugu u ka foroko fɔlɔ kɔnɔ min bɛ se ka ji sɔrɔ fo ka se u kɛli ma.

• Aw bɛ o fɛnw mara so kɔnɔ yɔrɔ saniyalen ni jalen na.

• Aw bɛ aw yɛrɛ tanga tile yeelen tilennen ma, funteni kojugu, nɛnɛba ani funteni caman cili teliya la.

• Aw bɛ sɛbɛnfura min bɛ kɛ s mara ka kɛ fla ye ani ka aw yɛrɛ tanga doni danfaralenw ma minnu bɛ se ka kɛ sababu ye ka fɛnw tiɲɛ.

• Aw bɛ finimugu min bɛ se ka sɛbɛn, aw bɛ o minɛ ni ganw sanumanw ye.

• Aw bɛ bolokɔniw, tulu, buguri ani fiɲɛw bali ka maga sɛbɛnnikɛlan walima lamini yɔrɔw la.

• Aw bɛ a to fɛn nɛnɛman ka se sɛbɛnnikɛlan funteni ma sani aw ka foroko datugulen da.

• Aw bɛ sɛbɛnfura min bɛ kɛ s yɔrɔ janya furajiw ni furakisɛ juguw la.

Kunnafoni minnu ka kan ka kɛ PVC Karti sɛbɛn Quotation kama

• Fɛn suguya wajibiyalen : min bɛ se ka sɛbɛn sɛbɛnfura min bɛ kɛ , core, overlay, kit, non-lamination material walima karti lankolon dafalen.

• A4, A5, A3, CR80 walima ladamu hakɛw.

• Layɛrɛ kelen-kelen bɛɛ janya ani laɲini fini-karti janya.

• Fɛn min bɛ se ka sɛbɛn, o ye fan kelen walima fan fila ye.

• Kulɛri finman, jɛlen, sanu, warijɛ walima kulɛri min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Surface glossy, matte, frosted walima embossed.

• Imprimante taamasiyɛn, modɛli ani sɛbɛnfura min bɛ kɛ -dumuni kɛcogo.

• A bɛ kɛ ni kalali ye, min bɛ kɛ ni ɲɛgɛn ye walima min bɛ kɛ ni tintiri suguya wɛrɛ ye.

• Laminator suguya ani sisan fɛnw jɔcogo.

• Karti baarakɛcogo wajibiyalen ani baarakɛcogo minnu yamaruyara.

• Kɔrɔbɔli hakɛ, fɔlɔ fɔlɔ ani san ɲinini.

• Bɔrɔw, sɛbɛnw, kɛsu, kartɔnw ani foroko minnu bɛ kɛ mɔgɔ kelen-kelen bɛɛ fɛ, olu wajibiyalen don.

• Jamana min bɛ taa, a cicogo ani sɛbɛnw minnu wajibiyalen don.

Aw ka PVC Karti Materiel wajibiyalenw ci

Packing ani Shipping

Lakanali foroko : sɛbɛnfura min bɛ kɛ s minnu bɛ se ka sɛbɛn, olu bɛ se ka datugu bɔrɔw kɔnɔ minnu tɛ ji bɔ, ka u pake kɛsu gɛlɛnw kɔnɔ walasa ka buguri, ji, kurukuruni ani dakun tiɲɛni dɔgɔya.

Sɛbɛn jate : sɛbɛnfura min bɛ kɛ s walima seti hakɛ min bɛ foroko kelen kɔnɔ, o bɛ se ka kɛ ka kɛɲɛ ni a bonya ye, a tilabaga ka ɲininiw ani feerekɛlaw ka foroko.

Labɛnni minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: Labeliw, bɔrɔw, kɛsuw ani kartɔnw bɛ se ka kɛ sannikɛla ka taamasiyɛn ye, a ka fɛn dilannenw ka kode, a janya, a fan fɛ cikanw minnu bɛ se ka sɛbɛn ani a ka barɔdi.

Fɛn minnu bɛ taa ni u ye jamana wɛrɛw la: Kartɔn caman bɛ se ka siri palɛtiw kan walasa ka taa ni u ye diɲɛ kɔnɔ fiɲɛ walima kɔgɔji la.

Fɛn minnu bɛ se ka ci: Misaliw ni komandi misɛnninw bɛ se ka ci ni ciden teliya ye. Koman caman bɛ se ka ci fiɲɛ fɛ walima kɔgɔji fɛ.

Sɛbɛnw ni jogoɲumanya sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ SGS ka kunnafonidisɛbɛnw ye minnu bɛ sirataama, sɛbɛnw minnu bɛ tali kɛ RoHS la ani ISO jogoɲini seereyaw.

Sannikɛlaw ka kan k’a jira ko sɛbɛn minnu bɛ tali kɛ PVC resin tigitigi la, fini min bɛ se ka sɛbɛn, a kulɛri, a kɔnɔfɛnw hakɛ min bɛ segin ka kɛ fɛn wɛrɛ ye, a janya ani a dilanni ɲɛfɔli.

ISO 9001 ye jogoɲumanya-sɔrɔ-cogo-sɔrɔ-cogo sariya ye. A yɛrɛ t’a jira ko PVC karti fɛn bɛɛ bɛ bɛn kemikɛli, sigida, lakana walima karti dafalen wajibiyalen kɛrɛnkɛrɛnnen dɔ ma.

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC Kartifɛnw feerela ye?

HSQY Plastic Group bɛ PVC sɛbɛnfura min bɛ kɛ s, PVC karti kɔnɔfɛnw, fɛn minnu datugulen don ni jɛlen ye, PVC karti lankolonw ani plastiki gɛlɛn wɛrɛw sɛbɛnfura min bɛ kɛ s di diɲɛ B2B kuntigiw ma.

• A4, A5, A3, CR80 ani hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• sɛbɛnfura min bɛ kɛ s minnu bɛ se ka sɛbɛn, karti kɔnɔna, dakunw ani fɛnw sigilenw dafalenw.

• Sugandili minnu bɛ kɛ fan kelen fɛ ani fan fila fɛ minnu dilannen don ni tintiri ye.

• Standard 0,76mm fini-karti jɔcogo.

• Fɛn finmanw, fɛn jɛlenw, sanu ni warijɛ.

• Glossy, matte ani customized surface finiw.

• Lamination conventionnelle ani instant-card materiel sugandiliw.

• Misaliw ye sɛbɛnnikɛlan, enki, laminatɛri ani tigɛcogo kɔrɔbɔliw ye.

• Foroko minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani fɛnw dilancogo minnu bɛ kɛ ni mɔgɔ kelen ta ye.

• Dɛmɛ min bɛ kɛ ka fɛn dilanni caman kɛ karti dilannikɛlaw ni a tilabagaw ye.

HSQY b’a ɲini aw fɛ aw ka sɛbɛnnikɛlanw baloli, tintin jalen, lamini, nɛnɛ, tigɛ ani karti dafalen sɛgɛsɛgɛliw dafa sani aw ka sɔn caman dilanni ɲɛfɔli ma.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

HSQY Duniya Ɲɛjiraliw

HSQY Plastic Group bɛ PVC kariti fɛnw jira, plastiki sɛbɛnfura min bɛ kɛ s minnu bɛ se ka sɛbɛn, pakew dilannifɛnw ani polimɛri furaw labɛnna ka kɛɲɛ ni mɔgɔw sago ye diɲɛ plastiki ni pakew jirali la.

Ɲininkali minnu bɛ kɛ tuma caman na Inkjet PVC ID Card sɛbɛnw kan

A4 inkjet printable PVC ID karti sɛbɛnfura min bɛ kɛ ye mun ye ?

O ye fɛn ye min bonya ye A4 ye PVC ni a sanfɛla datugulen don min dilannen don walasa ka sɛbɛnni kɛ ni tintiri ye min bɛ bɛn. sɛbɛnfura min bɛ kɛ s sɛbɛnnenw bɛ se ka fara ɲɔgɔn kan ni PVC core ni overlay layers ye, ka lamini ani ka tigɛ ka kɛ plastiki karti dafalenw ye.

Yala A4 PVC karti minɛn ni CR80 karti lankolon ye kelen ye wa?

No. A4 fɛn bɛ sɛbɛn i n’a fɔ sɛbɛnfura min bɛ kɛ ani a ka c’a la, a bɛ layɛrɛ lajɛ, lamini ani tigɛ. CR80 karti lankolon tigɛlen don kaban ka kɛɲɛ ni karti dafalen hakɛ ye, wa a bɛ karti sɛbɛnnikɛlan de wajibiya min bɛ bɛn a ma.

Yala PVC sɛbɛnfura min bɛ kɛ gansan bɛ se ka sɛbɛn ni inkjet sɛbɛnnikɛlan ye wa?

PVC gansan min ma datugu, a ka c’a la, o tɛ enki standard inkjet minɛ ka ɲɛ. Aw bɛ baara kɛ ni PVC grade ye min datugulen don kɛrɛnkɛrɛnnenya la ni inkjet-printable ye.

Printer jumɛnw bɛ se ka baara kɛ ni A4 inkjet PVC sɛbɛnfura min bɛ kɛ s ye?

Bɛnkan bɛ bɔ sɛbɛnnikɛlan modɛli la, balo sira la, kunnafonidilanw girinya hakɛ cayalenba la, enki chimie ani sɛbɛnfura min bɛ kɛ dacogo la. Imprimante tigitigi ka kan ka sɛgɛsɛgɛ sani ka komandi kɛ ka caya.

Yala PVC sɛbɛnfura min bɛ kɛ s bɛ se ka sɛbɛn fan fila bɛɛ la wa?

Awɔ. Inkjet-coated grades minnu bɛ kɛ fan fila fɛ, olu bɛ sɔrɔ. Aw bɛ a lajɛ ni a yɔrɔ fila bɛɛ datugulen don sani aw ka sɛbɛnni kɛ.

Yala kalali ni ɲɛgɛnw fila bɛɛ bɛ se ka kɛ wa?

Bɛnbaliya bɛ bɔ finimugu ni sɛbɛnnikɛlan de la. Aw bɛ enki minɛcogo, a jalen, a kulɛri density, rub resistance ani lamination performance kɔrɔbɔ ni encre yɛrɛ ye.

CR80 karti hakɛ dantigɛlen ye mun ye?

CR80 ka ɲɛfɔli hakɛ min bɛ kɛ tuma bɛɛ, o bɛ se milimɛtɛrɛ 85,6 × 54 ma. A janya dafalen min bɛ Kɛ ka caya, o bɛ Taa milimɛtɛrɛ 0,76 walima milimɛtɛrɛ 30 ɲɔgɔn na.

Layɛrɛ jumɛnw bɛ kɛ ka 0,76mm PVC karti dilan?

Reference structure kelen bɛ baara kɛ ni 0,08mm transparent overlays fila ye ani 0,30mm PVC layers fila. Jatebla wɛrɛ min bɛ Kɛ tuma caman na, o bɛ baara Kɛ ni ɲɛfɛ ni kɔfɛ sɛbɛnfura min bɛ kɛ s ye minnu bɛ Se ka sɛbɛnni Kɛ ni cɛmancɛ-kɔnɔ-fɛnw ye minnu ka bon.

Yala A4 inkjet PVC sɛbɛnfura min bɛ kɛ s bɛ lamini de wajibiya wa?

A4 karti sitɛmu kɔrɔlenw minnu bɛ kɛ ni layɛrɛ caman ye, a ka c’a la, olu bɛ lamini de wajibiya. Lamini tɛ walima instant-card systems fana bɛ sɔrɔ, nka u bɛ baara kɛ ni bonding structure ni processus wɛrɛ ye.

Minɛn jumɛnw ka kan ka kɛ walasa ka kartiw dilan ka bɔ A4 PVC sɛbɛnfura min bɛ kɛ s la?

Taabolo min bɛ kɛ cogoya la, o bɛ se ka kɛ ni sɛbɛnnikɛlan ye min bɛ bɛn enki ma, karti dilanni porogaramu, jalen yɔrɔ, laminatɛri, nɛnɛbɔlanw, karti punch walima tigɛlan ani sɛgɛsɛgɛlikɛminɛnw.

Lamini funteni jumɛn ka kan ka kɛ?

Funteni ɲuman bɛ bɔ PVC furakɛlicogo la, layini janya, dacogo datugucogo ani laminatɛri. Aw bɛ baara kɛ ni feerekɛla ka baarakɛcogo ladilikan ye ani ka fɛn dilanni kɔrɔbɔliw dafa sanni aw ka diɲɛ bɛɛ ka funteni kelen kɛ.

Mun na PVC karti lamininenw bɛ wuli?

Warping bɛ se ka sɔrɔ layɛrɛ janya balanbaliya fɛ, funteni kojugu, degun tɛ kelen ye, fɛnw ɲɛsincogo jugu walima nɛnɛ ma kunbɛn.

Mun na enki bɛ nɔgɔ lamini waati la?

A sababu minnu bɛ se ka kɛ, olu ye tintin ye min tɛ bɛn, enki hakɛ caya kojugu, a jalen tɛ, a yɔrɔ min bɛ se ka sɛbɛn ka ɲɛ walima a datugucogo ni a laminicogo min tɛ bɛn.

Mun na da tugulen bɛ faran ka bɔ karti la?

Delamination bɛ se ka sɔrɔ funteni walima degun bɛrɛbɛrɛ sɔrɔbaliya fɛ, yɔrɔ nɔgɔlenw, layini minnu tɛ bɛn ɲɔgɔn ma, enki kojugu, nɛnɛ jugu walima datugulan nɔrɔbaliya.

Yala magɛnni sɛrɛkiliw bɛ se ka fara a kan wa?

Magnetic-stripe overlays bɛ se ka jateminɛ porozew kama minnu yamaruyara. Stripe suguya, a jɔyɔrɔ, coercivity, encoder compatibilité ani lamination structure ka kan ka fɔ.

Yala RFID walima smart-card inlays bɛ se ka fara a kan wa?

RFID ni smart-card poroze minnu yamaruyara, olu bɛ inlay kɛrɛnkɛrɛnnen de wajibiya, layɛrɛ jɔcogo min bɛ kɔrɔsi, yɔrɔ tigitigi ani lamini cogoya sɛgɛsɛgɛlenw.

Yala PVC min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ wa?

Recycled-content walima mixed-material PVC bɛ se ka sɔrɔ baarakɛcogo sugandilenw kama. A yecogo, a saniya, a sɛbɛnni, a lamini ani a ka karti dafalen muɲuli ka kan ka kɔrɔbɔ.

Yala PVC kartiw bɛ se ka segin u cogo kɔrɔ la wa?

Segin-ka-bɔnye sɔnni bɛ bɔ sigida ka fɛnw lajɛcogo la, karti hakɛ, a datugucogo, magɛnni sɛrɛkiliw, fɛn minnu bɛ don a kɔnɔ ani mara PVC segin-ka-bɔnye infɔrɔmasiko.

Yala misaliw bɛ sɔrɔ wa?

Stock samples bɛ se ka sɔrɔ walasa ka sɛbɛnfura min bɛ kɛ balocogo sɛgɛsɛgɛ, ka tintin minɛ, ka a ja, ka a lamini, ka a siri ani ka karti tigɛ. A ka c’a la, doni bɛ sara sannikɛla fɛ.

MOQ ye mun ye?

Fɛn dilannenw paramɛtiri jɔnjɔn bɛ MOQ jira min bɛ kilo 1000 ɲɔgɔn bɔ. Fɛn kɛrɛnkɛrɛnnenw kisɛw, kulɛriw, finiw walima pake kɛrɛnkɛrɛnnenw bɛ se ka baara kɛ ni MOQ wɛrɛ ye.

A dilanni ɲɛminɛ waati ye mun ye?

A dilanni cogoya bɛ baara tile 15-20 ɲɔgɔn ta, a jɔcogo, a hakɛ, a foroko dilanni ani a sarali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ fɛn dilannen suguya di, sɛbɛnfura min bɛ kɛ hakɛ, layini janya, karti dafalen janya, kɛrɛ minnu bɛ se ka sɛbɛn, sɛbɛnnikɛlan modɛli, enki suguya, lamini kɛcogo, hakɛ, a foroko ani taayɔrɔ.

Aw ye Custom PVC Karti sɛbɛn Quote sɔrɔ

HSQY Plastic Group ko la

Changzhou Huisu Qinye Plastic Group Co., Ltd. bɛ inkjet printable PVC s, sɛbɛnfura min bɛ kɛ PVC karti core materials, coated overlay films, blank PVC kartiw ani plastic- sɛbɛnfura min bɛ kɛ fɛn wɛrɛw di diɲɛ B2B kuntigiw ma.

HSQY bɛ dɛmɛ don karti dilannikɛlaw ma, sɛbɛnnikɛlanw, birofɛnw tilabaga, badge dilannikɛlaw ani dantigɛli-fɛɛrɛ dilanbagaw ni u bonya, u bonya, u dacogo, u kulɛriw, u misaliw, u ka fɛɛrɛsɛbɛnw, u ka pakew dilanni minnu bɛ kɛ mɔgɔ kelen-kelen fɛ ani u dilanni caman.

Aw ye sɔngɔko sɛbɛn ɲini ani Sample